xref: /linux/include/linux/fsl/enetc_mdio.h (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1 /* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
2 /* Copyright 2019 NXP */
3 
4 #ifndef _FSL_ENETC_MDIO_H_
5 #define _FSL_ENETC_MDIO_H_
6 
7 #include <linux/phy.h>
8 
9 /* PCS registers */
10 #define ENETC_PCS_LINK_TIMER1			0x12
11 #define ENETC_PCS_LINK_TIMER1_VAL		0x06a0
12 #define ENETC_PCS_LINK_TIMER2			0x13
13 #define ENETC_PCS_LINK_TIMER2_VAL		0x0003
14 #define ENETC_PCS_IF_MODE			0x14
15 #define ENETC_PCS_IF_MODE_SGMII_EN		BIT(0)
16 #define ENETC_PCS_IF_MODE_USE_SGMII_AN		BIT(1)
17 #define ENETC_PCS_IF_MODE_SGMII_SPEED(x)	(((x) << 2) & GENMASK(3, 2))
18 #define ENETC_PCS_IF_MODE_DUPLEX_HALF		BIT(3)
19 
20 /* Not a mistake, the SerDes PLL needs to be set at 3.125 GHz by Reset
21  * Configuration Word (RCW, outside Linux control) for 2.5G SGMII mode. The PCS
22  * still thinks it's at gigabit.
23  */
24 enum enetc_pcs_speed {
25 	ENETC_PCS_SPEED_10	= 0,
26 	ENETC_PCS_SPEED_100	= 1,
27 	ENETC_PCS_SPEED_1000	= 2,
28 	ENETC_PCS_SPEED_2500	= 2,
29 };
30 
31 struct enetc_hw;
32 
33 struct enetc_mdio_priv {
34 	struct enetc_hw *hw;
35 	int mdio_base;
36 };
37 
38 #if IS_REACHABLE(CONFIG_FSL_ENETC_MDIO)
39 
40 int enetc_mdio_read_c22(struct mii_bus *bus, int phy_id, int regnum);
41 int enetc_mdio_write_c22(struct mii_bus *bus, int phy_id, int regnum,
42 			 u16 value);
43 int enetc_mdio_read_c45(struct mii_bus *bus, int phy_id, int devad, int regnum);
44 int enetc_mdio_write_c45(struct mii_bus *bus, int phy_id, int devad, int regnum,
45 			 u16 value);
46 struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs);
47 
48 #else
49 
50 static inline int enetc_mdio_read_c22(struct mii_bus *bus, int phy_id,
51 				      int regnum)
52 { return -EINVAL; }
53 static inline int enetc_mdio_write_c22(struct mii_bus *bus, int phy_id,
54 				       int regnum, u16 value)
55 { return -EINVAL; }
56 static inline int enetc_mdio_read_c45(struct mii_bus *bus, int phy_id,
57 				      int devad, int regnum)
58 { return -EINVAL; }
59 static inline int enetc_mdio_write_c45(struct mii_bus *bus, int phy_id,
60 				       int devad, int regnum, u16 value)
61 { return -EINVAL; }
62 static inline struct enetc_hw *enetc_hw_alloc(struct device *dev,
63 					      void __iomem *port_regs)
64 { return ERR_PTR(-EINVAL); }
65 
66 #endif
67 
68 #endif
69