1 /* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ 2 /* Copyright 2019 NXP */ 3 4 #ifndef _FSL_ENETC_MDIO_H_ 5 #define _FSL_ENETC_MDIO_H_ 6 7 #include <linux/phy.h> 8 9 /* PCS registers */ 10 #define ENETC_PCS_LINK_TIMER1 0x12 11 #define ENETC_PCS_LINK_TIMER1_VAL 0x06a0 12 #define ENETC_PCS_LINK_TIMER2 0x13 13 #define ENETC_PCS_LINK_TIMER2_VAL 0x0003 14 #define ENETC_PCS_IF_MODE 0x14 15 #define ENETC_PCS_IF_MODE_SGMII_EN BIT(0) 16 #define ENETC_PCS_IF_MODE_USE_SGMII_AN BIT(1) 17 #define ENETC_PCS_IF_MODE_SGMII_SPEED(x) (((x) << 2) & GENMASK(3, 2)) 18 #define ENETC_PCS_IF_MODE_DUPLEX_HALF BIT(3) 19 20 /* Not a mistake, the SerDes PLL needs to be set at 3.125 GHz by Reset 21 * Configuration Word (RCW, outside Linux control) for 2.5G SGMII mode. The PCS 22 * still thinks it's at gigabit. 23 */ 24 enum enetc_pcs_speed { 25 ENETC_PCS_SPEED_10 = 0, 26 ENETC_PCS_SPEED_100 = 1, 27 ENETC_PCS_SPEED_1000 = 2, 28 ENETC_PCS_SPEED_2500 = 2, 29 }; 30 31 struct enetc_hw; 32 33 struct enetc_mdio_priv { 34 struct enetc_hw *hw; 35 int mdio_base; 36 }; 37 38 #if IS_REACHABLE(CONFIG_FSL_ENETC_MDIO) 39 40 int enetc_mdio_read_c22(struct mii_bus *bus, int phy_id, int regnum); 41 int enetc_mdio_write_c22(struct mii_bus *bus, int phy_id, int regnum, 42 u16 value); 43 int enetc_mdio_read_c45(struct mii_bus *bus, int phy_id, int devad, int regnum); 44 int enetc_mdio_write_c45(struct mii_bus *bus, int phy_id, int devad, int regnum, 45 u16 value); 46 struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs); 47 48 #else 49 50 static inline int enetc_mdio_read_c22(struct mii_bus *bus, int phy_id, 51 int regnum) 52 { return -EINVAL; } 53 static inline int enetc_mdio_write_c22(struct mii_bus *bus, int phy_id, 54 int regnum, u16 value) 55 { return -EINVAL; } 56 static inline int enetc_mdio_read_c45(struct mii_bus *bus, int phy_id, 57 int devad, int regnum) 58 { return -EINVAL; } 59 static inline int enetc_mdio_write_c45(struct mii_bus *bus, int phy_id, 60 int devad, int regnum, u16 value) 61 { return -EINVAL; } 62 struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs) 63 { return ERR_PTR(-EINVAL); } 64 65 #endif 66 67 #endif 68