1 /* 2 * include/linux/extcon/extcon-adc-jack.h 3 * 4 * Analog Jack extcon driver with ADC-based detection capability. 5 * 6 * Copyright (C) 2012 Samsung Electronics 7 * MyungJoo Ham <myungjoo.ham@samsung.com> 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 * 13 */ 14 15 #ifndef _EXTCON_ADC_JACK_H_ 16 #define _EXTCON_ADC_JACK_H_ __FILE__ 17 18 #include <linux/module.h> 19 #include <linux/extcon.h> 20 21 /** 22 * struct adc_jack_cond - condition to use an extcon state 23 * denotes the last adc_jack_cond element among the array) 24 * @id: the unique id of each external connector 25 * @min_adc: min adc value for this condition 26 * @max_adc: max adc value for this condition 27 * 28 * For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means 29 * that if ADC value is between (inclusive) 100 and 200, than the cable 0 and 30 * 1 are attached (1<<0 | 1<<1 == 0x3) 31 * 32 * Note that you don't need to describe condition for "no cable attached" 33 * because when no adc_jack_cond is met, state = 0 is automatically chosen. 34 */ 35 struct adc_jack_cond { 36 unsigned int id; 37 u32 min_adc; 38 u32 max_adc; 39 }; 40 41 /** 42 * struct adc_jack_pdata - platform data for adc jack device. 43 * @name: name of the extcon device. If null, "adc-jack" is used. 44 * @consumer_channel: Unique name to identify the channel on the consumer 45 * side. This typically describes the channels used within 46 * the consumer. E.g. 'battery_voltage' 47 * @cable_names: array of extcon id for supported cables. 48 * @adc_contitions: array of struct adc_jack_cond conditions ending 49 * with .state = 0 entry. This describes how to decode 50 * adc values into extcon state. 51 * @irq_flags: irq flags used for the @irq 52 * @handling_delay_ms: in some devices, we need to read ADC value some 53 * milli-seconds after the interrupt occurs. You may 54 * describe such delays with @handling_delay_ms, which 55 * is rounded-off by jiffies. 56 * @wakeup_source: flag to wake up the system for extcon events. 57 */ 58 struct adc_jack_pdata { 59 const char *name; 60 const char *consumer_channel; 61 62 const unsigned int *cable_names; 63 64 /* The last entry's state should be 0 */ 65 struct adc_jack_cond *adc_conditions; 66 67 unsigned long irq_flags; 68 unsigned long handling_delay_ms; /* in ms */ 69 bool wakeup_source; 70 }; 71 72 #endif /* _EXTCON_ADC_JACK_H */ 73