xref: /linux/include/drm/drm_encoder_slave.h (revision e7d759f31ca295d589f7420719c311870bb3166f)
1 /*
2  * Copyright (C) 2009 Francisco Jerez.
3  * All Rights Reserved.
4  *
5  * Permission is hereby granted, free of charge, to any person obtaining
6  * a copy of this software and associated documentation files (the
7  * "Software"), to deal in the Software without restriction, including
8  * without limitation the rights to use, copy, modify, merge, publish,
9  * distribute, sublicense, and/or sell copies of the Software, and to
10  * permit persons to whom the Software is furnished to do so, subject to
11  * the following conditions:
12  *
13  * The above copyright notice and this permission notice (including the
14  * next paragraph) shall be included in all copies or substantial
15  * portions of the Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
18  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
19  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
20  * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
21  * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
22  * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
23  * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
24  *
25  */
26 
27 #ifndef __DRM_ENCODER_SLAVE_H__
28 #define __DRM_ENCODER_SLAVE_H__
29 
30 #include <linux/i2c.h>
31 
32 #include <drm/drm_crtc.h>
33 #include <drm/drm_encoder.h>
34 
35 /**
36  * struct drm_encoder_slave_funcs - Entry points exposed by a slave encoder driver
37  * @set_config:	Initialize any encoder-specific modesetting parameters.
38  *		The meaning of the @params parameter is implementation
39  *		dependent. It will usually be a structure with DVO port
40  *		data format settings or timings. It's not required for
41  *		the new parameters to take effect until the next mode
42  *		is set.
43  *
44  * Most of its members are analogous to the function pointers in
45  * &drm_encoder_helper_funcs and they can optionally be used to
46  * initialize the latter. Connector-like methods (e.g. @get_modes and
47  * @set_property) will typically be wrapped around and only be called
48  * if the encoder is the currently selected one for the connector.
49  */
50 struct drm_encoder_slave_funcs {
51 	void (*set_config)(struct drm_encoder *encoder,
52 			   void *params);
53 
54 	void (*destroy)(struct drm_encoder *encoder);
55 	void (*dpms)(struct drm_encoder *encoder, int mode);
56 	void (*save)(struct drm_encoder *encoder);
57 	void (*restore)(struct drm_encoder *encoder);
58 	bool (*mode_fixup)(struct drm_encoder *encoder,
59 			   const struct drm_display_mode *mode,
60 			   struct drm_display_mode *adjusted_mode);
61 	int (*mode_valid)(struct drm_encoder *encoder,
62 			  struct drm_display_mode *mode);
63 	void (*mode_set)(struct drm_encoder *encoder,
64 			 struct drm_display_mode *mode,
65 			 struct drm_display_mode *adjusted_mode);
66 
67 	enum drm_connector_status (*detect)(struct drm_encoder *encoder,
68 					    struct drm_connector *connector);
69 	int (*get_modes)(struct drm_encoder *encoder,
70 			 struct drm_connector *connector);
71 	int (*create_resources)(struct drm_encoder *encoder,
72 				 struct drm_connector *connector);
73 	int (*set_property)(struct drm_encoder *encoder,
74 			    struct drm_connector *connector,
75 			    struct drm_property *property,
76 			    uint64_t val);
77 
78 };
79 
80 /**
81  * struct drm_encoder_slave - Slave encoder struct
82  * @base: DRM encoder object.
83  * @slave_funcs: Slave encoder callbacks.
84  * @slave_priv: Slave encoder private data.
85  * @bus_priv: Bus specific data.
86  *
87  * A &drm_encoder_slave has two sets of callbacks, @slave_funcs and the
88  * ones in @base. The former are never actually called by the common
89  * CRTC code, it's just a convenience for splitting the encoder
90  * functions in an upper, GPU-specific layer and a (hopefully)
91  * GPU-agnostic lower layer: It's the GPU driver responsibility to
92  * call the slave methods when appropriate.
93  *
94  * drm_i2c_encoder_init() provides a way to get an implementation of
95  * this.
96  */
97 struct drm_encoder_slave {
98 	struct drm_encoder base;
99 
100 	const struct drm_encoder_slave_funcs *slave_funcs;
101 	void *slave_priv;
102 	void *bus_priv;
103 };
104 #define to_encoder_slave(x) container_of((x), struct drm_encoder_slave, base)
105 
106 int drm_i2c_encoder_init(struct drm_device *dev,
107 			 struct drm_encoder_slave *encoder,
108 			 struct i2c_adapter *adap,
109 			 const struct i2c_board_info *info);
110 
111 
112 /**
113  * struct drm_i2c_encoder_driver
114  *
115  * Describes a device driver for an encoder connected to the GPU
116  * through an I2C bus. In addition to the entry points in @i2c_driver
117  * an @encoder_init function should be provided. It will be called to
118  * give the driver an opportunity to allocate any per-encoder data
119  * structures and to initialize the @slave_funcs and (optionally)
120  * @slave_priv members of @encoder.
121  */
122 struct drm_i2c_encoder_driver {
123 	struct i2c_driver i2c_driver;
124 
125 	int (*encoder_init)(struct i2c_client *client,
126 			    struct drm_device *dev,
127 			    struct drm_encoder_slave *encoder);
128 
129 };
130 #define to_drm_i2c_encoder_driver(x) container_of((x),			\
131 						  struct drm_i2c_encoder_driver, \
132 						  i2c_driver)
133 
134 /**
135  * drm_i2c_encoder_get_client - Get the I2C client corresponding to an encoder
136  */
137 static inline struct i2c_client *drm_i2c_encoder_get_client(struct drm_encoder *encoder)
138 {
139 	return (struct i2c_client *)to_encoder_slave(encoder)->bus_priv;
140 }
141 
142 /**
143  * drm_i2c_encoder_register - Register an I2C encoder driver
144  * @owner:	Module containing the driver.
145  * @driver:	Driver to be registered.
146  */
147 static inline int drm_i2c_encoder_register(struct module *owner,
148 					   struct drm_i2c_encoder_driver *driver)
149 {
150 	return i2c_register_driver(owner, &driver->i2c_driver);
151 }
152 
153 /**
154  * drm_i2c_encoder_unregister - Unregister an I2C encoder driver
155  * @driver:	Driver to be unregistered.
156  */
157 static inline void drm_i2c_encoder_unregister(struct drm_i2c_encoder_driver *driver)
158 {
159 	i2c_del_driver(&driver->i2c_driver);
160 }
161 
162 void drm_i2c_encoder_destroy(struct drm_encoder *encoder);
163 
164 
165 /*
166  * Wrapper fxns which can be plugged in to drm_encoder_helper_funcs:
167  */
168 
169 void drm_i2c_encoder_dpms(struct drm_encoder *encoder, int mode);
170 bool drm_i2c_encoder_mode_fixup(struct drm_encoder *encoder,
171 		const struct drm_display_mode *mode,
172 		struct drm_display_mode *adjusted_mode);
173 void drm_i2c_encoder_prepare(struct drm_encoder *encoder);
174 void drm_i2c_encoder_commit(struct drm_encoder *encoder);
175 void drm_i2c_encoder_mode_set(struct drm_encoder *encoder,
176 		struct drm_display_mode *mode,
177 		struct drm_display_mode *adjusted_mode);
178 enum drm_connector_status drm_i2c_encoder_detect(struct drm_encoder *encoder,
179 	    struct drm_connector *connector);
180 void drm_i2c_encoder_save(struct drm_encoder *encoder);
181 void drm_i2c_encoder_restore(struct drm_encoder *encoder);
182 
183 
184 #endif
185