1 /* 2 * Copyright © 2006 Keith Packard 3 * Copyright © 2007-2008 Dave Airlie 4 * Copyright © 2007-2008 Intel Corporation 5 * Jesse Barnes <jesse.barnes@intel.com> 6 * 7 * Permission is hereby granted, free of charge, to any person obtaining a 8 * copy of this software and associated documentation files (the "Software"), 9 * to deal in the Software without restriction, including without limitation 10 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 11 * and/or sell copies of the Software, and to permit persons to whom the 12 * Software is furnished to do so, subject to the following conditions: 13 * 14 * The above copyright notice and this permission notice shall be included in 15 * all copies or substantial portions of the Software. 16 * 17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 20 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR 21 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 22 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 23 * OTHER DEALINGS IN THE SOFTWARE. 24 */ 25 #ifndef __DRM_CRTC_H__ 26 #define __DRM_CRTC_H__ 27 28 #include <linux/i2c.h> 29 #include <linux/spinlock.h> 30 #include <linux/types.h> 31 #include <linux/fb.h> 32 #include <linux/hdmi.h> 33 #include <linux/media-bus-format.h> 34 #include <uapi/drm/drm_mode.h> 35 #include <uapi/drm/drm_fourcc.h> 36 #include <drm/drm_modeset_lock.h> 37 #include <drm/drm_rect.h> 38 #include <drm/drm_mode_object.h> 39 #include <drm/drm_framebuffer.h> 40 #include <drm/drm_modes.h> 41 #include <drm/drm_connector.h> 42 #include <drm/drm_device.h> 43 #include <drm/drm_property.h> 44 #include <drm/drm_bridge.h> 45 #include <drm/drm_edid.h> 46 #include <drm/drm_plane.h> 47 #include <drm/drm_blend.h> 48 #include <drm/drm_color_mgmt.h> 49 #include <drm/drm_debugfs_crc.h> 50 #include <drm/drm_mode_config.h> 51 52 struct drm_device; 53 struct drm_mode_set; 54 struct drm_file; 55 struct drm_clip_rect; 56 struct drm_printer; 57 struct drm_self_refresh_data; 58 struct device_node; 59 struct dma_fence; 60 struct edid; 61 62 static inline int64_t U642I64(uint64_t val) 63 { 64 return (int64_t)*((int64_t *)&val); 65 } 66 static inline uint64_t I642U64(int64_t val) 67 { 68 return (uint64_t)*((uint64_t *)&val); 69 } 70 71 struct drm_crtc; 72 struct drm_pending_vblank_event; 73 struct drm_plane; 74 struct drm_bridge; 75 struct drm_atomic_state; 76 77 struct drm_crtc_helper_funcs; 78 struct drm_plane_helper_funcs; 79 80 /** 81 * struct drm_crtc_state - mutable CRTC state 82 * 83 * Note that the distinction between @enable and @active is rather subtle: 84 * Flipping @active while @enable is set without changing anything else may 85 * never return in a failure from the &drm_mode_config_funcs.atomic_check 86 * callback. Userspace assumes that a DPMS On will always succeed. In other 87 * words: @enable controls resource assignment, @active controls the actual 88 * hardware state. 89 * 90 * The three booleans active_changed, connectors_changed and mode_changed are 91 * intended to indicate whether a full modeset is needed, rather than strictly 92 * describing what has changed in a commit. See also: 93 * drm_atomic_crtc_needs_modeset() 94 * 95 * WARNING: Transitional helpers (like drm_helper_crtc_mode_set() or 96 * drm_helper_crtc_mode_set_base()) do not maintain many of the derived control 97 * state like @plane_mask so drivers not converted over to atomic helpers should 98 * not rely on these being accurate! 99 */ 100 struct drm_crtc_state { 101 /** @crtc: backpointer to the CRTC */ 102 struct drm_crtc *crtc; 103 104 /** 105 * @enable: Whether the CRTC should be enabled, gates all other state. 106 * This controls reservations of shared resources. Actual hardware state 107 * is controlled by @active. 108 */ 109 bool enable; 110 111 /** 112 * @active: Whether the CRTC is actively displaying (used for DPMS). 113 * Implies that @enable is set. The driver must not release any shared 114 * resources if @active is set to false but @enable still true, because 115 * userspace expects that a DPMS ON always succeeds. 116 * 117 * Hence drivers must not consult @active in their various 118 * &drm_mode_config_funcs.atomic_check callback to reject an atomic 119 * commit. They can consult it to aid in the computation of derived 120 * hardware state, since even in the DPMS OFF state the display hardware 121 * should be as much powered down as when the CRTC is completely 122 * disabled through setting @enable to false. 123 */ 124 bool active; 125 126 /** 127 * @planes_changed: Planes on this crtc are updated. Used by the atomic 128 * helpers and drivers to steer the atomic commit control flow. 129 */ 130 bool planes_changed : 1; 131 132 /** 133 * @mode_changed: @mode or @enable has been changed. Used by the atomic 134 * helpers and drivers to steer the atomic commit control flow. See also 135 * drm_atomic_crtc_needs_modeset(). 136 * 137 * Drivers are supposed to set this for any CRTC state changes that 138 * require a full modeset. They can also reset it to false if e.g. a 139 * @mode change can be done without a full modeset by only changing 140 * scaler settings. 141 */ 142 bool mode_changed : 1; 143 144 /** 145 * @active_changed: @active has been toggled. Used by the atomic 146 * helpers and drivers to steer the atomic commit control flow. See also 147 * drm_atomic_crtc_needs_modeset(). 148 */ 149 bool active_changed : 1; 150 151 /** 152 * @connectors_changed: Connectors to this crtc have been updated, 153 * either in their state or routing. Used by the atomic 154 * helpers and drivers to steer the atomic commit control flow. See also 155 * drm_atomic_crtc_needs_modeset(). 156 * 157 * Drivers are supposed to set this as-needed from their own atomic 158 * check code, e.g. from &drm_encoder_helper_funcs.atomic_check 159 */ 160 bool connectors_changed : 1; 161 /** 162 * @zpos_changed: zpos values of planes on this crtc have been updated. 163 * Used by the atomic helpers and drivers to steer the atomic commit 164 * control flow. 165 */ 166 bool zpos_changed : 1; 167 /** 168 * @color_mgmt_changed: Color management properties have changed 169 * (@gamma_lut, @degamma_lut or @ctm). Used by the atomic helpers and 170 * drivers to steer the atomic commit control flow. 171 */ 172 bool color_mgmt_changed : 1; 173 174 /** 175 * @no_vblank: 176 * 177 * Reflects the ability of a CRTC to send VBLANK events. This state 178 * usually depends on the pipeline configuration, and the main usuage 179 * is CRTCs feeding a writeback connector operating in oneshot mode. 180 * In this case the VBLANK event is only generated when a job is queued 181 * to the writeback connector, and we want the core to fake VBLANK 182 * events when this part of the pipeline hasn't changed but others had 183 * or when the CRTC and connectors are being disabled. 184 * 185 * __drm_atomic_helper_crtc_duplicate_state() will not reset the value 186 * from the current state, the CRTC driver is then responsible for 187 * updating this field when needed. 188 * 189 * Note that the combination of &drm_crtc_state.event == NULL and 190 * &drm_crtc_state.no_blank == true is valid and usually used when the 191 * writeback connector attached to the CRTC has a new job queued. In 192 * this case the driver will send the VBLANK event on its own when the 193 * writeback job is complete. 194 */ 195 bool no_vblank : 1; 196 197 /** 198 * @plane_mask: Bitmask of drm_plane_mask(plane) of planes attached to 199 * this CRTC. 200 */ 201 u32 plane_mask; 202 203 /** 204 * @connector_mask: Bitmask of drm_connector_mask(connector) of 205 * connectors attached to this CRTC. 206 */ 207 u32 connector_mask; 208 209 /** 210 * @encoder_mask: Bitmask of drm_encoder_mask(encoder) of encoders 211 * attached to this CRTC. 212 */ 213 u32 encoder_mask; 214 215 /** 216 * @adjusted_mode: 217 * 218 * Internal display timings which can be used by the driver to handle 219 * differences between the mode requested by userspace in @mode and what 220 * is actually programmed into the hardware. 221 * 222 * For drivers using &drm_bridge, this stores hardware display timings 223 * used between the CRTC and the first bridge. For other drivers, the 224 * meaning of the adjusted_mode field is purely driver implementation 225 * defined information, and will usually be used to store the hardware 226 * display timings used between the CRTC and encoder blocks. 227 */ 228 struct drm_display_mode adjusted_mode; 229 230 /** 231 * @mode: 232 * 233 * Display timings requested by userspace. The driver should try to 234 * match the refresh rate as close as possible (but note that it's 235 * undefined what exactly is close enough, e.g. some of the HDMI modes 236 * only differ in less than 1% of the refresh rate). The active width 237 * and height as observed by userspace for positioning planes must match 238 * exactly. 239 * 240 * For external connectors where the sink isn't fixed (like with a 241 * built-in panel), this mode here should match the physical mode on the 242 * wire to the last details (i.e. including sync polarities and 243 * everything). 244 */ 245 struct drm_display_mode mode; 246 247 /** 248 * @mode_blob: &drm_property_blob for @mode, for exposing the mode to 249 * atomic userspace. 250 */ 251 struct drm_property_blob *mode_blob; 252 253 /** 254 * @degamma_lut: 255 * 256 * Lookup table for converting framebuffer pixel data before apply the 257 * color conversion matrix @ctm. See drm_crtc_enable_color_mgmt(). The 258 * blob (if not NULL) is an array of &struct drm_color_lut. 259 */ 260 struct drm_property_blob *degamma_lut; 261 262 /** 263 * @ctm: 264 * 265 * Color transformation matrix. See drm_crtc_enable_color_mgmt(). The 266 * blob (if not NULL) is a &struct drm_color_ctm. 267 */ 268 struct drm_property_blob *ctm; 269 270 /** 271 * @gamma_lut: 272 * 273 * Lookup table for converting pixel data after the color conversion 274 * matrix @ctm. See drm_crtc_enable_color_mgmt(). The blob (if not 275 * NULL) is an array of &struct drm_color_lut. 276 */ 277 struct drm_property_blob *gamma_lut; 278 279 /** 280 * @target_vblank: 281 * 282 * Target vertical blank period when a page flip 283 * should take effect. 284 */ 285 u32 target_vblank; 286 287 /** 288 * @pageflip_flags: 289 * 290 * DRM_MODE_PAGE_FLIP_* flags, as passed to the page flip ioctl. 291 * Zero in any other case. 292 */ 293 u32 pageflip_flags; 294 295 /** 296 * @vrr_enabled: 297 * 298 * Indicates if variable refresh rate should be enabled for the CRTC. 299 * Support for the requested vrr state will depend on driver and 300 * hardware capabiltiy - lacking support is not treated as failure. 301 */ 302 bool vrr_enabled; 303 304 /** 305 * @self_refresh_active: 306 * 307 * Used by the self refresh helpers to denote when a self refresh 308 * transition is occurring. This will be set on enable/disable callbacks 309 * when self refresh is being enabled or disabled. In some cases, it may 310 * not be desirable to fully shut off the crtc during self refresh. 311 * CRTC's can inspect this flag and determine the best course of action. 312 */ 313 bool self_refresh_active; 314 315 /** 316 * @event: 317 * 318 * Optional pointer to a DRM event to signal upon completion of the 319 * state update. The driver must send out the event when the atomic 320 * commit operation completes. There are two cases: 321 * 322 * - The event is for a CRTC which is being disabled through this 323 * atomic commit. In that case the event can be send out any time 324 * after the hardware has stopped scanning out the current 325 * framebuffers. It should contain the timestamp and counter for the 326 * last vblank before the display pipeline was shut off. The simplest 327 * way to achieve that is calling drm_crtc_send_vblank_event() 328 * somewhen after drm_crtc_vblank_off() has been called. 329 * 330 * - For a CRTC which is enabled at the end of the commit (even when it 331 * undergoes an full modeset) the vblank timestamp and counter must 332 * be for the vblank right before the first frame that scans out the 333 * new set of buffers. Again the event can only be sent out after the 334 * hardware has stopped scanning out the old buffers. 335 * 336 * - Events for disabled CRTCs are not allowed, and drivers can ignore 337 * that case. 338 * 339 * This can be handled by the drm_crtc_send_vblank_event() function, 340 * which the driver should call on the provided event upon completion of 341 * the atomic commit. Note that if the driver supports vblank signalling 342 * and timestamping the vblank counters and timestamps must agree with 343 * the ones returned from page flip events. With the current vblank 344 * helper infrastructure this can be achieved by holding a vblank 345 * reference while the page flip is pending, acquired through 346 * drm_crtc_vblank_get() and released with drm_crtc_vblank_put(). 347 * Drivers are free to implement their own vblank counter and timestamp 348 * tracking though, e.g. if they have accurate timestamp registers in 349 * hardware. 350 * 351 * For hardware which supports some means to synchronize vblank 352 * interrupt delivery with committing display state there's also 353 * drm_crtc_arm_vblank_event(). See the documentation of that function 354 * for a detailed discussion of the constraints it needs to be used 355 * safely. 356 * 357 * If the device can't notify of flip completion in a race-free way 358 * at all, then the event should be armed just after the page flip is 359 * committed. In the worst case the driver will send the event to 360 * userspace one frame too late. This doesn't allow for a real atomic 361 * update, but it should avoid tearing. 362 */ 363 struct drm_pending_vblank_event *event; 364 365 /** 366 * @commit: 367 * 368 * This tracks how the commit for this update proceeds through the 369 * various phases. This is never cleared, except when we destroy the 370 * state, so that subsequent commits can synchronize with previous ones. 371 */ 372 struct drm_crtc_commit *commit; 373 374 /** @state: backpointer to global drm_atomic_state */ 375 struct drm_atomic_state *state; 376 }; 377 378 /** 379 * struct drm_crtc_funcs - control CRTCs for a given device 380 * 381 * The drm_crtc_funcs structure is the central CRTC management structure 382 * in the DRM. Each CRTC controls one or more connectors (note that the name 383 * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc. 384 * connectors, not just CRTs). 385 * 386 * Each driver is responsible for filling out this structure at startup time, 387 * in addition to providing other modesetting features, like i2c and DDC 388 * bus accessors. 389 */ 390 struct drm_crtc_funcs { 391 /** 392 * @reset: 393 * 394 * Reset CRTC hardware and software state to off. This function isn't 395 * called by the core directly, only through drm_mode_config_reset(). 396 * It's not a helper hook only for historical reasons. 397 * 398 * Atomic drivers can use drm_atomic_helper_crtc_reset() to reset 399 * atomic state using this hook. 400 */ 401 void (*reset)(struct drm_crtc *crtc); 402 403 /** 404 * @cursor_set: 405 * 406 * Update the cursor image. The cursor position is relative to the CRTC 407 * and can be partially or fully outside of the visible area. 408 * 409 * Note that contrary to all other KMS functions the legacy cursor entry 410 * points don't take a framebuffer object, but instead take directly a 411 * raw buffer object id from the driver's buffer manager (which is 412 * either GEM or TTM for current drivers). 413 * 414 * This entry point is deprecated, drivers should instead implement 415 * universal plane support and register a proper cursor plane using 416 * drm_crtc_init_with_planes(). 417 * 418 * This callback is optional 419 * 420 * RETURNS: 421 * 422 * 0 on success or a negative error code on failure. 423 */ 424 int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv, 425 uint32_t handle, uint32_t width, uint32_t height); 426 427 /** 428 * @cursor_set2: 429 * 430 * Update the cursor image, including hotspot information. The hotspot 431 * must not affect the cursor position in CRTC coordinates, but is only 432 * meant as a hint for virtualized display hardware to coordinate the 433 * guests and hosts cursor position. The cursor hotspot is relative to 434 * the cursor image. Otherwise this works exactly like @cursor_set. 435 * 436 * This entry point is deprecated, drivers should instead implement 437 * universal plane support and register a proper cursor plane using 438 * drm_crtc_init_with_planes(). 439 * 440 * This callback is optional. 441 * 442 * RETURNS: 443 * 444 * 0 on success or a negative error code on failure. 445 */ 446 int (*cursor_set2)(struct drm_crtc *crtc, struct drm_file *file_priv, 447 uint32_t handle, uint32_t width, uint32_t height, 448 int32_t hot_x, int32_t hot_y); 449 450 /** 451 * @cursor_move: 452 * 453 * Update the cursor position. The cursor does not need to be visible 454 * when this hook is called. 455 * 456 * This entry point is deprecated, drivers should instead implement 457 * universal plane support and register a proper cursor plane using 458 * drm_crtc_init_with_planes(). 459 * 460 * This callback is optional. 461 * 462 * RETURNS: 463 * 464 * 0 on success or a negative error code on failure. 465 */ 466 int (*cursor_move)(struct drm_crtc *crtc, int x, int y); 467 468 /** 469 * @gamma_set: 470 * 471 * Set gamma on the CRTC. 472 * 473 * This callback is optional. 474 * 475 * Atomic drivers who want to support gamma tables should implement the 476 * atomic color management support, enabled by calling 477 * drm_crtc_enable_color_mgmt(), which then supports the legacy gamma 478 * interface through the drm_atomic_helper_legacy_gamma_set() 479 * compatibility implementation. 480 */ 481 int (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, 482 uint32_t size, 483 struct drm_modeset_acquire_ctx *ctx); 484 485 /** 486 * @destroy: 487 * 488 * Clean up CRTC resources. This is only called at driver unload time 489 * through drm_mode_config_cleanup() since a CRTC cannot be hotplugged 490 * in DRM. 491 */ 492 void (*destroy)(struct drm_crtc *crtc); 493 494 /** 495 * @set_config: 496 * 497 * This is the main legacy entry point to change the modeset state on a 498 * CRTC. All the details of the desired configuration are passed in a 499 * &struct drm_mode_set - see there for details. 500 * 501 * Drivers implementing atomic modeset should use 502 * drm_atomic_helper_set_config() to implement this hook. 503 * 504 * RETURNS: 505 * 506 * 0 on success or a negative error code on failure. 507 */ 508 int (*set_config)(struct drm_mode_set *set, 509 struct drm_modeset_acquire_ctx *ctx); 510 511 /** 512 * @page_flip: 513 * 514 * Legacy entry point to schedule a flip to the given framebuffer. 515 * 516 * Page flipping is a synchronization mechanism that replaces the frame 517 * buffer being scanned out by the CRTC with a new frame buffer during 518 * vertical blanking, avoiding tearing (except when requested otherwise 519 * through the DRM_MODE_PAGE_FLIP_ASYNC flag). When an application 520 * requests a page flip the DRM core verifies that the new frame buffer 521 * is large enough to be scanned out by the CRTC in the currently 522 * configured mode and then calls this hook with a pointer to the new 523 * frame buffer. 524 * 525 * The driver must wait for any pending rendering to the new framebuffer 526 * to complete before executing the flip. It should also wait for any 527 * pending rendering from other drivers if the underlying buffer is a 528 * shared dma-buf. 529 * 530 * An application can request to be notified when the page flip has 531 * completed. The drm core will supply a &struct drm_event in the event 532 * parameter in this case. This can be handled by the 533 * drm_crtc_send_vblank_event() function, which the driver should call on 534 * the provided event upon completion of the flip. Note that if 535 * the driver supports vblank signalling and timestamping the vblank 536 * counters and timestamps must agree with the ones returned from page 537 * flip events. With the current vblank helper infrastructure this can 538 * be achieved by holding a vblank reference while the page flip is 539 * pending, acquired through drm_crtc_vblank_get() and released with 540 * drm_crtc_vblank_put(). Drivers are free to implement their own vblank 541 * counter and timestamp tracking though, e.g. if they have accurate 542 * timestamp registers in hardware. 543 * 544 * This callback is optional. 545 * 546 * NOTE: 547 * 548 * Very early versions of the KMS ABI mandated that the driver must 549 * block (but not reject) any rendering to the old framebuffer until the 550 * flip operation has completed and the old framebuffer is no longer 551 * visible. This requirement has been lifted, and userspace is instead 552 * expected to request delivery of an event and wait with recycling old 553 * buffers until such has been received. 554 * 555 * RETURNS: 556 * 557 * 0 on success or a negative error code on failure. Note that if a 558 * page flip operation is already pending the callback should return 559 * -EBUSY. Pageflips on a disabled CRTC (either by setting a NULL mode 560 * or just runtime disabled through DPMS respectively the new atomic 561 * "ACTIVE" state) should result in an -EINVAL error code. Note that 562 * drm_atomic_helper_page_flip() checks this already for atomic drivers. 563 */ 564 int (*page_flip)(struct drm_crtc *crtc, 565 struct drm_framebuffer *fb, 566 struct drm_pending_vblank_event *event, 567 uint32_t flags, 568 struct drm_modeset_acquire_ctx *ctx); 569 570 /** 571 * @page_flip_target: 572 * 573 * Same as @page_flip but with an additional parameter specifying the 574 * absolute target vertical blank period (as reported by 575 * drm_crtc_vblank_count()) when the flip should take effect. 576 * 577 * Note that the core code calls drm_crtc_vblank_get before this entry 578 * point, and will call drm_crtc_vblank_put if this entry point returns 579 * any non-0 error code. It's the driver's responsibility to call 580 * drm_crtc_vblank_put after this entry point returns 0, typically when 581 * the flip completes. 582 */ 583 int (*page_flip_target)(struct drm_crtc *crtc, 584 struct drm_framebuffer *fb, 585 struct drm_pending_vblank_event *event, 586 uint32_t flags, uint32_t target, 587 struct drm_modeset_acquire_ctx *ctx); 588 589 /** 590 * @set_property: 591 * 592 * This is the legacy entry point to update a property attached to the 593 * CRTC. 594 * 595 * This callback is optional if the driver does not support any legacy 596 * driver-private properties. For atomic drivers it is not used because 597 * property handling is done entirely in the DRM core. 598 * 599 * RETURNS: 600 * 601 * 0 on success or a negative error code on failure. 602 */ 603 int (*set_property)(struct drm_crtc *crtc, 604 struct drm_property *property, uint64_t val); 605 606 /** 607 * @atomic_duplicate_state: 608 * 609 * Duplicate the current atomic state for this CRTC and return it. 610 * The core and helpers guarantee that any atomic state duplicated with 611 * this hook and still owned by the caller (i.e. not transferred to the 612 * driver by calling &drm_mode_config_funcs.atomic_commit) will be 613 * cleaned up by calling the @atomic_destroy_state hook in this 614 * structure. 615 * 616 * This callback is mandatory for atomic drivers. 617 * 618 * Atomic drivers which don't subclass &struct drm_crtc_state should use 619 * drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the 620 * state structure to extend it with driver-private state should use 621 * __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is 622 * duplicated in a consistent fashion across drivers. 623 * 624 * It is an error to call this hook before &drm_crtc.state has been 625 * initialized correctly. 626 * 627 * NOTE: 628 * 629 * If the duplicate state references refcounted resources this hook must 630 * acquire a reference for each of them. The driver must release these 631 * references again in @atomic_destroy_state. 632 * 633 * RETURNS: 634 * 635 * Duplicated atomic state or NULL when the allocation failed. 636 */ 637 struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc); 638 639 /** 640 * @atomic_destroy_state: 641 * 642 * Destroy a state duplicated with @atomic_duplicate_state and release 643 * or unreference all resources it references 644 * 645 * This callback is mandatory for atomic drivers. 646 */ 647 void (*atomic_destroy_state)(struct drm_crtc *crtc, 648 struct drm_crtc_state *state); 649 650 /** 651 * @atomic_set_property: 652 * 653 * Decode a driver-private property value and store the decoded value 654 * into the passed-in state structure. Since the atomic core decodes all 655 * standardized properties (even for extensions beyond the core set of 656 * properties which might not be implemented by all drivers) this 657 * requires drivers to subclass the state structure. 658 * 659 * Such driver-private properties should really only be implemented for 660 * truly hardware/vendor specific state. Instead it is preferred to 661 * standardize atomic extension and decode the properties used to expose 662 * such an extension in the core. 663 * 664 * Do not call this function directly, use 665 * drm_atomic_crtc_set_property() instead. 666 * 667 * This callback is optional if the driver does not support any 668 * driver-private atomic properties. 669 * 670 * NOTE: 671 * 672 * This function is called in the state assembly phase of atomic 673 * modesets, which can be aborted for any reason (including on 674 * userspace's request to just check whether a configuration would be 675 * possible). Drivers MUST NOT touch any persistent state (hardware or 676 * software) or data structures except the passed in @state parameter. 677 * 678 * Also since userspace controls in which order properties are set this 679 * function must not do any input validation (since the state update is 680 * incomplete and hence likely inconsistent). Instead any such input 681 * validation must be done in the various atomic_check callbacks. 682 * 683 * RETURNS: 684 * 685 * 0 if the property has been found, -EINVAL if the property isn't 686 * implemented by the driver (which should never happen, the core only 687 * asks for properties attached to this CRTC). No other validation is 688 * allowed by the driver. The core already checks that the property 689 * value is within the range (integer, valid enum value, ...) the driver 690 * set when registering the property. 691 */ 692 int (*atomic_set_property)(struct drm_crtc *crtc, 693 struct drm_crtc_state *state, 694 struct drm_property *property, 695 uint64_t val); 696 /** 697 * @atomic_get_property: 698 * 699 * Reads out the decoded driver-private property. This is used to 700 * implement the GETCRTC IOCTL. 701 * 702 * Do not call this function directly, use 703 * drm_atomic_crtc_get_property() instead. 704 * 705 * This callback is optional if the driver does not support any 706 * driver-private atomic properties. 707 * 708 * RETURNS: 709 * 710 * 0 on success, -EINVAL if the property isn't implemented by the 711 * driver (which should never happen, the core only asks for 712 * properties attached to this CRTC). 713 */ 714 int (*atomic_get_property)(struct drm_crtc *crtc, 715 const struct drm_crtc_state *state, 716 struct drm_property *property, 717 uint64_t *val); 718 719 /** 720 * @late_register: 721 * 722 * This optional hook can be used to register additional userspace 723 * interfaces attached to the crtc like debugfs interfaces. 724 * It is called late in the driver load sequence from drm_dev_register(). 725 * Everything added from this callback should be unregistered in 726 * the early_unregister callback. 727 * 728 * Returns: 729 * 730 * 0 on success, or a negative error code on failure. 731 */ 732 int (*late_register)(struct drm_crtc *crtc); 733 734 /** 735 * @early_unregister: 736 * 737 * This optional hook should be used to unregister the additional 738 * userspace interfaces attached to the crtc from 739 * @late_register. It is called from drm_dev_unregister(), 740 * early in the driver unload sequence to disable userspace access 741 * before data structures are torndown. 742 */ 743 void (*early_unregister)(struct drm_crtc *crtc); 744 745 /** 746 * @set_crc_source: 747 * 748 * Changes the source of CRC checksums of frames at the request of 749 * userspace, typically for testing purposes. The sources available are 750 * specific of each driver and a %NULL value indicates that CRC 751 * generation is to be switched off. 752 * 753 * When CRC generation is enabled, the driver should call 754 * drm_crtc_add_crc_entry() at each frame, providing any information 755 * that characterizes the frame contents in the crcN arguments, as 756 * provided from the configured source. Drivers must accept an "auto" 757 * source name that will select a default source for this CRTC. 758 * 759 * Note that "auto" can depend upon the current modeset configuration, 760 * e.g. it could pick an encoder or output specific CRC sampling point. 761 * 762 * This callback is optional if the driver does not support any CRC 763 * generation functionality. 764 * 765 * RETURNS: 766 * 767 * 0 on success or a negative error code on failure. 768 */ 769 int (*set_crc_source)(struct drm_crtc *crtc, const char *source); 770 /** 771 * @verify_crc_source: 772 * 773 * verifies the source of CRC checksums of frames before setting the 774 * source for CRC and during crc open. Source parameter can be NULL 775 * while disabling crc source. 776 * 777 * This callback is optional if the driver does not support any CRC 778 * generation functionality. 779 * 780 * RETURNS: 781 * 782 * 0 on success or a negative error code on failure. 783 */ 784 int (*verify_crc_source)(struct drm_crtc *crtc, const char *source, 785 size_t *values_cnt); 786 /** 787 * @get_crc_sources: 788 * 789 * Driver callback for getting a list of all the available sources for 790 * CRC generation. This callback depends upon verify_crc_source, So 791 * verify_crc_source callback should be implemented before implementing 792 * this. Driver can pass full list of available crc sources, this 793 * callback does the verification on each crc-source before passing it 794 * to userspace. 795 * 796 * This callback is optional if the driver does not support exporting of 797 * possible CRC sources list. 798 * 799 * RETURNS: 800 * 801 * a constant character pointer to the list of all the available CRC 802 * sources. On failure driver should return NULL. count should be 803 * updated with number of sources in list. if zero we don't process any 804 * source from the list. 805 */ 806 const char *const *(*get_crc_sources)(struct drm_crtc *crtc, 807 size_t *count); 808 809 /** 810 * @atomic_print_state: 811 * 812 * If driver subclasses &struct drm_crtc_state, it should implement 813 * this optional hook for printing additional driver specific state. 814 * 815 * Do not call this directly, use drm_atomic_crtc_print_state() 816 * instead. 817 */ 818 void (*atomic_print_state)(struct drm_printer *p, 819 const struct drm_crtc_state *state); 820 821 /** 822 * @get_vblank_counter: 823 * 824 * Driver callback for fetching a raw hardware vblank counter for the 825 * CRTC. It's meant to be used by new drivers as the replacement of 826 * &drm_driver.get_vblank_counter hook. 827 * 828 * This callback is optional. If a device doesn't have a hardware 829 * counter, the driver can simply leave the hook as NULL. The DRM core 830 * will account for missed vblank events while interrupts where disabled 831 * based on system timestamps. 832 * 833 * Wraparound handling and loss of events due to modesetting is dealt 834 * with in the DRM core code, as long as drivers call 835 * drm_crtc_vblank_off() and drm_crtc_vblank_on() when disabling or 836 * enabling a CRTC. 837 * 838 * See also &drm_device.vblank_disable_immediate and 839 * &drm_device.max_vblank_count. 840 * 841 * Returns: 842 * 843 * Raw vblank counter value. 844 */ 845 u32 (*get_vblank_counter)(struct drm_crtc *crtc); 846 847 /** 848 * @enable_vblank: 849 * 850 * Enable vblank interrupts for the CRTC. It's meant to be used by 851 * new drivers as the replacement of &drm_driver.enable_vblank hook. 852 * 853 * Returns: 854 * 855 * Zero on success, appropriate errno if the vblank interrupt cannot 856 * be enabled. 857 */ 858 int (*enable_vblank)(struct drm_crtc *crtc); 859 860 /** 861 * @disable_vblank: 862 * 863 * Disable vblank interrupts for the CRTC. It's meant to be used by 864 * new drivers as the replacement of &drm_driver.disable_vblank hook. 865 */ 866 void (*disable_vblank)(struct drm_crtc *crtc); 867 }; 868 869 /** 870 * struct drm_crtc - central CRTC control structure 871 * 872 * Each CRTC may have one or more connectors associated with it. This structure 873 * allows the CRTC to be controlled. 874 */ 875 struct drm_crtc { 876 /** @dev: parent DRM device */ 877 struct drm_device *dev; 878 /** @port: OF node used by drm_of_find_possible_crtcs(). */ 879 struct device_node *port; 880 /** 881 * @head: 882 * 883 * List of all CRTCs on @dev, linked from &drm_mode_config.crtc_list. 884 * Invariant over the lifetime of @dev and therefore does not need 885 * locking. 886 */ 887 struct list_head head; 888 889 /** @name: human readable name, can be overwritten by the driver */ 890 char *name; 891 892 /** 893 * @mutex: 894 * 895 * This provides a read lock for the overall CRTC state (mode, dpms 896 * state, ...) and a write lock for everything which can be update 897 * without a full modeset (fb, cursor data, CRTC properties ...). A full 898 * modeset also need to grab &drm_mode_config.connection_mutex. 899 * 900 * For atomic drivers specifically this protects @state. 901 */ 902 struct drm_modeset_lock mutex; 903 904 /** @base: base KMS object for ID tracking etc. */ 905 struct drm_mode_object base; 906 907 /** 908 * @primary: 909 * Primary plane for this CRTC. Note that this is only 910 * relevant for legacy IOCTL, it specifies the plane implicitly used by 911 * the SETCRTC and PAGE_FLIP IOCTLs. It does not have any significance 912 * beyond that. 913 */ 914 struct drm_plane *primary; 915 916 /** 917 * @cursor: 918 * Cursor plane for this CRTC. Note that this is only relevant for 919 * legacy IOCTL, it specifies the plane implicitly used by the SETCURSOR 920 * and SETCURSOR2 IOCTLs. It does not have any significance 921 * beyond that. 922 */ 923 struct drm_plane *cursor; 924 925 /** 926 * @index: Position inside the mode_config.list, can be used as an array 927 * index. It is invariant over the lifetime of the CRTC. 928 */ 929 unsigned index; 930 931 /** 932 * @cursor_x: Current x position of the cursor, used for universal 933 * cursor planes because the SETCURSOR IOCTL only can update the 934 * framebuffer without supplying the coordinates. Drivers should not use 935 * this directly, atomic drivers should look at &drm_plane_state.crtc_x 936 * of the cursor plane instead. 937 */ 938 int cursor_x; 939 /** 940 * @cursor_y: Current y position of the cursor, used for universal 941 * cursor planes because the SETCURSOR IOCTL only can update the 942 * framebuffer without supplying the coordinates. Drivers should not use 943 * this directly, atomic drivers should look at &drm_plane_state.crtc_y 944 * of the cursor plane instead. 945 */ 946 int cursor_y; 947 948 /** 949 * @enabled: 950 * 951 * Is this CRTC enabled? Should only be used by legacy drivers, atomic 952 * drivers should instead consult &drm_crtc_state.enable and 953 * &drm_crtc_state.active. Atomic drivers can update this by calling 954 * drm_atomic_helper_update_legacy_modeset_state(). 955 */ 956 bool enabled; 957 958 /** 959 * @mode: 960 * 961 * Current mode timings. Should only be used by legacy drivers, atomic 962 * drivers should instead consult &drm_crtc_state.mode. Atomic drivers 963 * can update this by calling 964 * drm_atomic_helper_update_legacy_modeset_state(). 965 */ 966 struct drm_display_mode mode; 967 968 /** 969 * @hwmode: 970 * 971 * Programmed mode in hw, after adjustments for encoders, crtc, panel 972 * scaling etc. Should only be used by legacy drivers, for high 973 * precision vblank timestamps in 974 * drm_calc_vbltimestamp_from_scanoutpos(). 975 * 976 * Note that atomic drivers should not use this, but instead use 977 * &drm_crtc_state.adjusted_mode. And for high-precision timestamps 978 * drm_calc_vbltimestamp_from_scanoutpos() used &drm_vblank_crtc.hwmode, 979 * which is filled out by calling drm_calc_timestamping_constants(). 980 */ 981 struct drm_display_mode hwmode; 982 983 /** 984 * @x: 985 * x position on screen. Should only be used by legacy drivers, atomic 986 * drivers should look at &drm_plane_state.crtc_x of the primary plane 987 * instead. Updated by calling 988 * drm_atomic_helper_update_legacy_modeset_state(). 989 */ 990 int x; 991 /** 992 * @y: 993 * y position on screen. Should only be used by legacy drivers, atomic 994 * drivers should look at &drm_plane_state.crtc_y of the primary plane 995 * instead. Updated by calling 996 * drm_atomic_helper_update_legacy_modeset_state(). 997 */ 998 int y; 999 1000 /** @funcs: CRTC control functions */ 1001 const struct drm_crtc_funcs *funcs; 1002 1003 /** 1004 * @gamma_size: Size of legacy gamma ramp reported to userspace. Set up 1005 * by calling drm_mode_crtc_set_gamma_size(). 1006 */ 1007 uint32_t gamma_size; 1008 1009 /** 1010 * @gamma_store: Gamma ramp values used by the legacy SETGAMMA and 1011 * GETGAMMA IOCTls. Set up by calling drm_mode_crtc_set_gamma_size(). 1012 */ 1013 uint16_t *gamma_store; 1014 1015 /** @helper_private: mid-layer private data */ 1016 const struct drm_crtc_helper_funcs *helper_private; 1017 1018 /** @properties: property tracking for this CRTC */ 1019 struct drm_object_properties properties; 1020 1021 /** 1022 * @state: 1023 * 1024 * Current atomic state for this CRTC. 1025 * 1026 * This is protected by @mutex. Note that nonblocking atomic commits 1027 * access the current CRTC state without taking locks. Either by going 1028 * through the &struct drm_atomic_state pointers, see 1029 * for_each_oldnew_crtc_in_state(), for_each_old_crtc_in_state() and 1030 * for_each_new_crtc_in_state(). Or through careful ordering of atomic 1031 * commit operations as implemented in the atomic helpers, see 1032 * &struct drm_crtc_commit. 1033 */ 1034 struct drm_crtc_state *state; 1035 1036 /** 1037 * @commit_list: 1038 * 1039 * List of &drm_crtc_commit structures tracking pending commits. 1040 * Protected by @commit_lock. This list holds its own full reference, 1041 * as does the ongoing commit. 1042 * 1043 * "Note that the commit for a state change is also tracked in 1044 * &drm_crtc_state.commit. For accessing the immediately preceding 1045 * commit in an atomic update it is recommended to just use that 1046 * pointer in the old CRTC state, since accessing that doesn't need 1047 * any locking or list-walking. @commit_list should only be used to 1048 * stall for framebuffer cleanup that's signalled through 1049 * &drm_crtc_commit.cleanup_done." 1050 */ 1051 struct list_head commit_list; 1052 1053 /** 1054 * @commit_lock: 1055 * 1056 * Spinlock to protect @commit_list. 1057 */ 1058 spinlock_t commit_lock; 1059 1060 #ifdef CONFIG_DEBUG_FS 1061 /** 1062 * @debugfs_entry: 1063 * 1064 * Debugfs directory for this CRTC. 1065 */ 1066 struct dentry *debugfs_entry; 1067 #endif 1068 1069 /** 1070 * @crc: 1071 * 1072 * Configuration settings of CRC capture. 1073 */ 1074 struct drm_crtc_crc crc; 1075 1076 /** 1077 * @fence_context: 1078 * 1079 * timeline context used for fence operations. 1080 */ 1081 unsigned int fence_context; 1082 1083 /** 1084 * @fence_lock: 1085 * 1086 * spinlock to protect the fences in the fence_context. 1087 */ 1088 spinlock_t fence_lock; 1089 /** 1090 * @fence_seqno: 1091 * 1092 * Seqno variable used as monotonic counter for the fences 1093 * created on the CRTC's timeline. 1094 */ 1095 unsigned long fence_seqno; 1096 1097 /** 1098 * @timeline_name: 1099 * 1100 * The name of the CRTC's fence timeline. 1101 */ 1102 char timeline_name[32]; 1103 1104 /** 1105 * @self_refresh_data: Holds the state for the self refresh helpers 1106 * 1107 * Initialized via drm_self_refresh_helper_register(). 1108 */ 1109 struct drm_self_refresh_data *self_refresh_data; 1110 }; 1111 1112 /** 1113 * struct drm_mode_set - new values for a CRTC config change 1114 * @fb: framebuffer to use for new config 1115 * @crtc: CRTC whose configuration we're about to change 1116 * @mode: mode timings to use 1117 * @x: position of this CRTC relative to @fb 1118 * @y: position of this CRTC relative to @fb 1119 * @connectors: array of connectors to drive with this CRTC if possible 1120 * @num_connectors: size of @connectors array 1121 * 1122 * This represents a modeset configuration for the legacy SETCRTC ioctl and is 1123 * also used internally. Atomic drivers instead use &drm_atomic_state. 1124 */ 1125 struct drm_mode_set { 1126 struct drm_framebuffer *fb; 1127 struct drm_crtc *crtc; 1128 struct drm_display_mode *mode; 1129 1130 uint32_t x; 1131 uint32_t y; 1132 1133 struct drm_connector **connectors; 1134 size_t num_connectors; 1135 }; 1136 1137 #define obj_to_crtc(x) container_of(x, struct drm_crtc, base) 1138 1139 __printf(6, 7) 1140 int drm_crtc_init_with_planes(struct drm_device *dev, 1141 struct drm_crtc *crtc, 1142 struct drm_plane *primary, 1143 struct drm_plane *cursor, 1144 const struct drm_crtc_funcs *funcs, 1145 const char *name, ...); 1146 void drm_crtc_cleanup(struct drm_crtc *crtc); 1147 1148 /** 1149 * drm_crtc_index - find the index of a registered CRTC 1150 * @crtc: CRTC to find index for 1151 * 1152 * Given a registered CRTC, return the index of that CRTC within a DRM 1153 * device's list of CRTCs. 1154 */ 1155 static inline unsigned int drm_crtc_index(const struct drm_crtc *crtc) 1156 { 1157 return crtc->index; 1158 } 1159 1160 /** 1161 * drm_crtc_mask - find the mask of a registered CRTC 1162 * @crtc: CRTC to find mask for 1163 * 1164 * Given a registered CRTC, return the mask bit of that CRTC for the 1165 * &drm_encoder.possible_crtcs and &drm_plane.possible_crtcs fields. 1166 */ 1167 static inline uint32_t drm_crtc_mask(const struct drm_crtc *crtc) 1168 { 1169 return 1 << drm_crtc_index(crtc); 1170 } 1171 1172 int drm_mode_set_config_internal(struct drm_mode_set *set); 1173 struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx); 1174 1175 /** 1176 * drm_crtc_find - look up a CRTC object from its ID 1177 * @dev: DRM device 1178 * @file_priv: drm file to check for lease against. 1179 * @id: &drm_mode_object ID 1180 * 1181 * This can be used to look up a CRTC from its userspace ID. Only used by 1182 * drivers for legacy IOCTLs and interface, nowadays extensions to the KMS 1183 * userspace interface should be done using &drm_property. 1184 */ 1185 static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev, 1186 struct drm_file *file_priv, 1187 uint32_t id) 1188 { 1189 struct drm_mode_object *mo; 1190 mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CRTC); 1191 return mo ? obj_to_crtc(mo) : NULL; 1192 } 1193 1194 /** 1195 * drm_for_each_crtc - iterate over all CRTCs 1196 * @crtc: a &struct drm_crtc as the loop cursor 1197 * @dev: the &struct drm_device 1198 * 1199 * Iterate over all CRTCs of @dev. 1200 */ 1201 #define drm_for_each_crtc(crtc, dev) \ 1202 list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head) 1203 1204 #endif /* __DRM_CRTC_H__ */ 1205