1 /* 2 * Copyright (c) 2016 Intel Corporation 3 * 4 * Permission to use, copy, modify, distribute, and sell this software and its 5 * documentation for any purpose is hereby granted without fee, provided that 6 * the above copyright notice appear in all copies and that both that copyright 7 * notice and this permission notice appear in supporting documentation, and 8 * that the name of the copyright holders not be used in advertising or 9 * publicity pertaining to distribution of the software without specific, 10 * written prior permission. The copyright holders make no representations 11 * about the suitability of this software for any purpose. It is provided "as 12 * is" without express or implied warranty. 13 * 14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO 16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR 17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 20 * OF THIS SOFTWARE. 21 */ 22 23 #ifndef __DRM_CONNECTOR_H__ 24 #define __DRM_CONNECTOR_H__ 25 26 #include <linux/list.h> 27 #include <linux/llist.h> 28 #include <linux/ctype.h> 29 #include <linux/hdmi.h> 30 #include <linux/notifier.h> 31 #include <drm/drm_mode_object.h> 32 #include <drm/drm_util.h> 33 #include <drm/drm_property.h> 34 35 #include <uapi/drm/drm_mode.h> 36 37 struct drm_connector_helper_funcs; 38 struct drm_modeset_acquire_ctx; 39 struct drm_device; 40 struct drm_crtc; 41 struct drm_display_mode; 42 struct drm_encoder; 43 struct drm_panel; 44 struct drm_property; 45 struct drm_property_blob; 46 struct drm_printer; 47 struct drm_privacy_screen; 48 struct drm_edid; 49 struct edid; 50 struct hdmi_codec_daifmt; 51 struct hdmi_codec_params; 52 struct i2c_adapter; 53 54 enum drm_connector_force { 55 DRM_FORCE_UNSPECIFIED, 56 DRM_FORCE_OFF, 57 DRM_FORCE_ON, /* force on analog part normally */ 58 DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */ 59 }; 60 61 /** 62 * enum drm_connector_status - status for a &drm_connector 63 * 64 * This enum is used to track the connector status. There are no separate 65 * #defines for the uapi! 66 */ 67 enum drm_connector_status { 68 /** 69 * @connector_status_connected: The connector is definitely connected to 70 * a sink device, and can be enabled. 71 */ 72 connector_status_connected = 1, 73 /** 74 * @connector_status_disconnected: The connector isn't connected to a 75 * sink device which can be autodetect. For digital outputs like DP or 76 * HDMI (which can be realiable probed) this means there's really 77 * nothing there. It is driver-dependent whether a connector with this 78 * status can be lit up or not. 79 */ 80 connector_status_disconnected = 2, 81 /** 82 * @connector_status_unknown: The connector's status could not be 83 * reliably detected. This happens when probing would either cause 84 * flicker (like load-detection when the connector is in use), or when a 85 * hardware resource isn't available (like when load-detection needs a 86 * free CRTC). It should be possible to light up the connector with one 87 * of the listed fallback modes. For default configuration userspace 88 * should only try to light up connectors with unknown status when 89 * there's not connector with @connector_status_connected. 90 */ 91 connector_status_unknown = 3, 92 }; 93 94 /** 95 * enum drm_connector_registration_state - userspace registration status for 96 * a &drm_connector 97 * 98 * This enum is used to track the status of initializing a connector and 99 * registering it with userspace, so that DRM can prevent bogus modesets on 100 * connectors that no longer exist. 101 */ 102 enum drm_connector_registration_state { 103 /** 104 * @DRM_CONNECTOR_INITIALIZING: The connector has just been created, 105 * but has yet to be exposed to userspace. There should be no 106 * additional restrictions to how the state of this connector may be 107 * modified. 108 */ 109 DRM_CONNECTOR_INITIALIZING = 0, 110 111 /** 112 * @DRM_CONNECTOR_REGISTERED: The connector has been fully initialized 113 * and registered with sysfs, as such it has been exposed to 114 * userspace. There should be no additional restrictions to how the 115 * state of this connector may be modified. 116 */ 117 DRM_CONNECTOR_REGISTERED = 1, 118 119 /** 120 * @DRM_CONNECTOR_UNREGISTERED: The connector has either been exposed 121 * to userspace and has since been unregistered and removed from 122 * userspace, or the connector was unregistered before it had a chance 123 * to be exposed to userspace (e.g. still in the 124 * @DRM_CONNECTOR_INITIALIZING state). When a connector is 125 * unregistered, there are additional restrictions to how its state 126 * may be modified: 127 * 128 * - An unregistered connector may only have its DPMS changed from 129 * On->Off. Once DPMS is changed to Off, it may not be switched back 130 * to On. 131 * - Modesets are not allowed on unregistered connectors, unless they 132 * would result in disabling its assigned CRTCs. This means 133 * disabling a CRTC on an unregistered connector is OK, but enabling 134 * one is not. 135 * - Removing a CRTC from an unregistered connector is OK, but new 136 * CRTCs may never be assigned to an unregistered connector. 137 */ 138 DRM_CONNECTOR_UNREGISTERED = 2, 139 }; 140 141 enum subpixel_order { 142 SubPixelUnknown = 0, 143 SubPixelHorizontalRGB, 144 SubPixelHorizontalBGR, 145 SubPixelVerticalRGB, 146 SubPixelVerticalBGR, 147 SubPixelNone, 148 149 }; 150 151 /** 152 * enum drm_connector_tv_mode - Analog TV output mode 153 * 154 * This enum is used to indicate the TV output mode used on an analog TV 155 * connector. 156 * 157 * WARNING: The values of this enum is uABI since they're exposed in the 158 * "TV mode" connector property. 159 */ 160 enum drm_connector_tv_mode { 161 /** 162 * @DRM_MODE_TV_MODE_NTSC: CCIR System M (aka 525-lines) 163 * together with the NTSC Color Encoding. 164 */ 165 DRM_MODE_TV_MODE_NTSC, 166 167 /** 168 * @DRM_MODE_TV_MODE_NTSC_443: Variant of 169 * @DRM_MODE_TV_MODE_NTSC. Uses a color subcarrier frequency 170 * of 4.43 MHz. 171 */ 172 DRM_MODE_TV_MODE_NTSC_443, 173 174 /** 175 * @DRM_MODE_TV_MODE_NTSC_J: Variant of @DRM_MODE_TV_MODE_NTSC 176 * used in Japan. Uses a black level equals to the blanking 177 * level. 178 */ 179 DRM_MODE_TV_MODE_NTSC_J, 180 181 /** 182 * @DRM_MODE_TV_MODE_PAL: CCIR System B together with the PAL 183 * color system. 184 */ 185 DRM_MODE_TV_MODE_PAL, 186 187 /** 188 * @DRM_MODE_TV_MODE_PAL_M: CCIR System M (aka 525-lines) 189 * together with the PAL color encoding 190 */ 191 DRM_MODE_TV_MODE_PAL_M, 192 193 /** 194 * @DRM_MODE_TV_MODE_PAL_N: CCIR System N together with the PAL 195 * color encoding. It uses 625 lines, but has a color subcarrier 196 * frequency of 3.58MHz, the SECAM color space, and narrower 197 * channels compared to most of the other PAL variants. 198 */ 199 DRM_MODE_TV_MODE_PAL_N, 200 201 /** 202 * @DRM_MODE_TV_MODE_SECAM: CCIR System B together with the 203 * SECAM color system. 204 */ 205 DRM_MODE_TV_MODE_SECAM, 206 207 /** 208 * @DRM_MODE_TV_MODE_MONOCHROME: Use timings appropriate to 209 * the DRM mode, including equalizing pulses for a 525-line 210 * or 625-line mode, with no pedestal or color encoding. 211 */ 212 DRM_MODE_TV_MODE_MONOCHROME, 213 214 /** 215 * @DRM_MODE_TV_MODE_MAX: Number of analog TV output modes. 216 * 217 * Internal implementation detail; this is not uABI. 218 */ 219 DRM_MODE_TV_MODE_MAX, 220 }; 221 222 /** 223 * struct drm_scrambling: sink's scrambling support. 224 */ 225 struct drm_scrambling { 226 /** 227 * @supported: scrambling supported for rates > 340 Mhz. 228 */ 229 bool supported; 230 /** 231 * @low_rates: scrambling supported for rates <= 340 Mhz. 232 */ 233 bool low_rates; 234 }; 235 236 /* 237 * struct drm_scdc - Information about scdc capabilities of a HDMI 2.0 sink 238 * 239 * Provides SCDC register support and capabilities related information on a 240 * HDMI 2.0 sink. In case of a HDMI 1.4 sink, all parameter must be 0. 241 */ 242 struct drm_scdc { 243 /** 244 * @supported: status control & data channel present. 245 */ 246 bool supported; 247 /** 248 * @read_request: sink is capable of generating scdc read request. 249 */ 250 bool read_request; 251 /** 252 * @scrambling: sink's scrambling capabilities 253 */ 254 struct drm_scrambling scrambling; 255 }; 256 257 /** 258 * struct drm_hdmi_dsc_cap - DSC capabilities of HDMI sink 259 * 260 * Describes the DSC support provided by HDMI 2.1 sink. 261 * The information is fetched fom additional HFVSDB blocks defined 262 * for HDMI 2.1. 263 */ 264 struct drm_hdmi_dsc_cap { 265 /** @v_1p2: flag for dsc1.2 version support by sink */ 266 bool v_1p2; 267 268 /** @native_420: Does sink support DSC with 4:2:0 compression */ 269 bool native_420; 270 271 /** 272 * @all_bpp: Does sink support all bpp with 4:4:4: or 4:2:2 273 * compressed formats 274 */ 275 bool all_bpp; 276 277 /** 278 * @bpc_supported: compressed bpc supported by sink : 10, 12 or 16 bpc 279 */ 280 u8 bpc_supported; 281 282 /** @max_slices: maximum number of Horizontal slices supported by */ 283 u8 max_slices; 284 285 /** @clk_per_slice : max pixel clock in MHz supported per slice */ 286 int clk_per_slice; 287 288 /** @max_lanes : dsc max lanes supported for Fixed rate Link training */ 289 u8 max_lanes; 290 291 /** @max_frl_rate_per_lane : maximum frl rate with DSC per lane */ 292 u8 max_frl_rate_per_lane; 293 294 /** @total_chunk_kbytes: max size of chunks in KBs supported per line*/ 295 u8 total_chunk_kbytes; 296 }; 297 298 /** 299 * struct drm_hdmi_info - runtime information about the connected HDMI sink 300 * 301 * Describes if a given display supports advanced HDMI 2.0 features. 302 * This information is available in CEA-861-F extension blocks (like HF-VSDB). 303 */ 304 struct drm_hdmi_info { 305 /** @scdc: sink's scdc support and capabilities */ 306 struct drm_scdc scdc; 307 308 /** 309 * @y420_vdb_modes: bitmap of modes which can support ycbcr420 310 * output only (not normal RGB/YCBCR444/422 outputs). The max VIC 311 * defined by the CEA-861-G spec is 219, so the size is 256 bits to map 312 * up to 256 VICs. 313 */ 314 unsigned long y420_vdb_modes[BITS_TO_LONGS(256)]; 315 316 /** 317 * @y420_cmdb_modes: bitmap of modes which can support ycbcr420 318 * output also, along with normal HDMI outputs. The max VIC defined by 319 * the CEA-861-G spec is 219, so the size is 256 bits to map up to 256 320 * VICs. 321 */ 322 unsigned long y420_cmdb_modes[BITS_TO_LONGS(256)]; 323 324 /** @y420_dc_modes: bitmap of deep color support index */ 325 u8 y420_dc_modes; 326 327 /** @max_frl_rate_per_lane: support fixed rate link */ 328 u8 max_frl_rate_per_lane; 329 330 /** @max_lanes: supported by sink */ 331 u8 max_lanes; 332 333 /** @dsc_cap: DSC capabilities of the sink */ 334 struct drm_hdmi_dsc_cap dsc_cap; 335 }; 336 337 /** 338 * enum drm_link_status - connector's link_status property value 339 * 340 * This enum is used as the connector's link status property value. 341 * It is set to the values defined in uapi. 342 * 343 * @DRM_LINK_STATUS_GOOD: DP Link is Good as a result of successful 344 * link training 345 * @DRM_LINK_STATUS_BAD: DP Link is BAD as a result of link training 346 * failure 347 */ 348 enum drm_link_status { 349 DRM_LINK_STATUS_GOOD = DRM_MODE_LINK_STATUS_GOOD, 350 DRM_LINK_STATUS_BAD = DRM_MODE_LINK_STATUS_BAD, 351 }; 352 353 /** 354 * enum drm_panel_orientation - panel_orientation info for &drm_display_info 355 * 356 * This enum is used to track the (LCD) panel orientation. There are no 357 * separate #defines for the uapi! 358 * 359 * @DRM_MODE_PANEL_ORIENTATION_UNKNOWN: The drm driver has not provided any 360 * panel orientation information (normal 361 * for non panels) in this case the "panel 362 * orientation" connector prop will not be 363 * attached. 364 * @DRM_MODE_PANEL_ORIENTATION_NORMAL: The top side of the panel matches the 365 * top side of the device's casing. 366 * @DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: The top side of the panel matches the 367 * bottom side of the device's casing, iow 368 * the panel is mounted upside-down. 369 * @DRM_MODE_PANEL_ORIENTATION_LEFT_UP: The left side of the panel matches the 370 * top side of the device's casing. 371 * @DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: The right side of the panel matches the 372 * top side of the device's casing. 373 */ 374 enum drm_panel_orientation { 375 DRM_MODE_PANEL_ORIENTATION_UNKNOWN = -1, 376 DRM_MODE_PANEL_ORIENTATION_NORMAL = 0, 377 DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, 378 DRM_MODE_PANEL_ORIENTATION_LEFT_UP, 379 DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, 380 }; 381 382 /** 383 * enum drm_hdmi_broadcast_rgb - Broadcast RGB Selection for an HDMI @drm_connector 384 */ 385 enum drm_hdmi_broadcast_rgb { 386 /** 387 * @DRM_HDMI_BROADCAST_RGB_AUTO: The RGB range is selected 388 * automatically based on the mode. 389 */ 390 DRM_HDMI_BROADCAST_RGB_AUTO, 391 392 /** 393 * @DRM_HDMI_BROADCAST_RGB_FULL: Full range RGB is forced. 394 */ 395 DRM_HDMI_BROADCAST_RGB_FULL, 396 397 /** 398 * @DRM_HDMI_BROADCAST_RGB_LIMITED: Limited range RGB is forced. 399 */ 400 DRM_HDMI_BROADCAST_RGB_LIMITED, 401 }; 402 403 const char * 404 drm_hdmi_connector_get_broadcast_rgb_name(enum drm_hdmi_broadcast_rgb broadcast_rgb); 405 const char * 406 drm_hdmi_connector_get_output_format_name(enum hdmi_colorspace fmt); 407 408 /** 409 * struct drm_monitor_range_info - Panel's Monitor range in EDID for 410 * &drm_display_info 411 * 412 * This struct is used to store a frequency range supported by panel 413 * as parsed from EDID's detailed monitor range descriptor block. 414 * 415 * @min_vfreq: This is the min supported refresh rate in Hz from 416 * EDID's detailed monitor range. 417 * @max_vfreq: This is the max supported refresh rate in Hz from 418 * EDID's detailed monitor range 419 */ 420 struct drm_monitor_range_info { 421 u16 min_vfreq; 422 u16 max_vfreq; 423 }; 424 425 /** 426 * struct drm_luminance_range_info - Panel's luminance range for 427 * &drm_display_info. Calculated using data in EDID 428 * 429 * This struct is used to store a luminance range supported by panel 430 * as calculated using data from EDID's static hdr metadata. 431 * 432 * @min_luminance: This is the min supported luminance value 433 * 434 * @max_luminance: This is the max supported luminance value 435 */ 436 struct drm_luminance_range_info { 437 u32 min_luminance; 438 u32 max_luminance; 439 }; 440 441 /** 442 * enum drm_privacy_screen_status - privacy screen status 443 * 444 * This enum is used to track and control the state of the integrated privacy 445 * screen present on some display panels, via the "privacy-screen sw-state" 446 * and "privacy-screen hw-state" properties. Note the _LOCKED enum values 447 * are only valid for the "privacy-screen hw-state" property. 448 * 449 * @PRIVACY_SCREEN_DISABLED: 450 * The privacy-screen on the panel is disabled 451 * @PRIVACY_SCREEN_ENABLED: 452 * The privacy-screen on the panel is enabled 453 * @PRIVACY_SCREEN_DISABLED_LOCKED: 454 * The privacy-screen on the panel is disabled and locked (cannot be changed) 455 * @PRIVACY_SCREEN_ENABLED_LOCKED: 456 * The privacy-screen on the panel is enabled and locked (cannot be changed) 457 */ 458 enum drm_privacy_screen_status { 459 PRIVACY_SCREEN_DISABLED = 0, 460 PRIVACY_SCREEN_ENABLED, 461 PRIVACY_SCREEN_DISABLED_LOCKED, 462 PRIVACY_SCREEN_ENABLED_LOCKED, 463 }; 464 465 /** 466 * enum drm_colorspace - color space 467 * 468 * This enum is a consolidated colorimetry list supported by HDMI and 469 * DP protocol standard. The respective connectors will register 470 * a property with the subset of this list (supported by that 471 * respective protocol). Userspace will set the colorspace through 472 * a colorspace property which will be created and exposed to 473 * userspace. 474 * 475 * DP definitions come from the DP v2.0 spec 476 * HDMI definitions come from the CTA-861-H spec 477 * 478 * @DRM_MODE_COLORIMETRY_DEFAULT: 479 * Driver specific behavior. 480 * @DRM_MODE_COLORIMETRY_NO_DATA: 481 * Driver specific behavior. 482 * @DRM_MODE_COLORIMETRY_SMPTE_170M_YCC: 483 * (HDMI) 484 * SMPTE ST 170M colorimetry format 485 * @DRM_MODE_COLORIMETRY_BT709_YCC: 486 * (HDMI, DP) 487 * ITU-R BT.709 colorimetry format 488 * @DRM_MODE_COLORIMETRY_XVYCC_601: 489 * (HDMI, DP) 490 * xvYCC601 colorimetry format 491 * @DRM_MODE_COLORIMETRY_XVYCC_709: 492 * (HDMI, DP) 493 * xvYCC709 colorimetry format 494 * @DRM_MODE_COLORIMETRY_SYCC_601: 495 * (HDMI, DP) 496 * sYCC601 colorimetry format 497 * @DRM_MODE_COLORIMETRY_OPYCC_601: 498 * (HDMI, DP) 499 * opYCC601 colorimetry format 500 * @DRM_MODE_COLORIMETRY_OPRGB: 501 * (HDMI, DP) 502 * opRGB colorimetry format 503 * @DRM_MODE_COLORIMETRY_BT2020_CYCC: 504 * (HDMI, DP) 505 * ITU-R BT.2020 Y'c C'bc C'rc (constant luminance) colorimetry format 506 * @DRM_MODE_COLORIMETRY_BT2020_RGB: 507 * (HDMI, DP) 508 * ITU-R BT.2020 R' G' B' colorimetry format 509 * @DRM_MODE_COLORIMETRY_BT2020_YCC: 510 * (HDMI, DP) 511 * ITU-R BT.2020 Y' C'b C'r colorimetry format 512 * @DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65: 513 * (HDMI) 514 * SMPTE ST 2113 P3D65 colorimetry format 515 * @DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER: 516 * (HDMI) 517 * SMPTE ST 2113 P3DCI colorimetry format 518 * @DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED: 519 * (DP) 520 * RGB wide gamut fixed point colorimetry format 521 * @DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT: 522 * (DP) 523 * RGB wide gamut floating point 524 * (scRGB (IEC 61966-2-2)) colorimetry format 525 * @DRM_MODE_COLORIMETRY_BT601_YCC: 526 * (DP) 527 * ITU-R BT.601 colorimetry format 528 * The DP spec does not say whether this is the 525 or the 625 529 * line version. 530 * @DRM_MODE_COLORIMETRY_COUNT: 531 * Not a valid value; merely used four counting 532 */ 533 enum drm_colorspace { 534 /* For Default case, driver will set the colorspace */ 535 DRM_MODE_COLORIMETRY_DEFAULT = 0, 536 /* CEA 861 Normal Colorimetry options */ 537 DRM_MODE_COLORIMETRY_NO_DATA = 0, 538 DRM_MODE_COLORIMETRY_SMPTE_170M_YCC = 1, 539 DRM_MODE_COLORIMETRY_BT709_YCC = 2, 540 /* CEA 861 Extended Colorimetry Options */ 541 DRM_MODE_COLORIMETRY_XVYCC_601 = 3, 542 DRM_MODE_COLORIMETRY_XVYCC_709 = 4, 543 DRM_MODE_COLORIMETRY_SYCC_601 = 5, 544 DRM_MODE_COLORIMETRY_OPYCC_601 = 6, 545 DRM_MODE_COLORIMETRY_OPRGB = 7, 546 DRM_MODE_COLORIMETRY_BT2020_CYCC = 8, 547 DRM_MODE_COLORIMETRY_BT2020_RGB = 9, 548 DRM_MODE_COLORIMETRY_BT2020_YCC = 10, 549 /* Additional Colorimetry extension added as part of CTA 861.G */ 550 DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65 = 11, 551 DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER = 12, 552 /* Additional Colorimetry Options added for DP 1.4a VSC Colorimetry Format */ 553 DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED = 13, 554 DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT = 14, 555 DRM_MODE_COLORIMETRY_BT601_YCC = 15, 556 DRM_MODE_COLORIMETRY_COUNT 557 }; 558 559 /** 560 * enum drm_bus_flags - bus_flags info for &drm_display_info 561 * 562 * This enum defines signal polarities and clock edge information for signals on 563 * a bus as bitmask flags. 564 * 565 * The clock edge information is conveyed by two sets of symbols, 566 * DRM_BUS_FLAGS_*_DRIVE_\* and DRM_BUS_FLAGS_*_SAMPLE_\*. When this enum is 567 * used to describe a bus from the point of view of the transmitter, the 568 * \*_DRIVE_\* flags should be used. When used from the point of view of the 569 * receiver, the \*_SAMPLE_\* flags should be used. The \*_DRIVE_\* and 570 * \*_SAMPLE_\* flags alias each other, with the \*_SAMPLE_POSEDGE and 571 * \*_SAMPLE_NEGEDGE flags being equal to \*_DRIVE_NEGEDGE and \*_DRIVE_POSEDGE 572 * respectively. This simplifies code as signals are usually sampled on the 573 * opposite edge of the driving edge. Transmitters and receivers may however 574 * need to take other signal timings into account to convert between driving 575 * and sample edges. 576 */ 577 enum drm_bus_flags { 578 /** 579 * @DRM_BUS_FLAG_DE_LOW: 580 * 581 * The Data Enable signal is active low 582 */ 583 DRM_BUS_FLAG_DE_LOW = BIT(0), 584 585 /** 586 * @DRM_BUS_FLAG_DE_HIGH: 587 * 588 * The Data Enable signal is active high 589 */ 590 DRM_BUS_FLAG_DE_HIGH = BIT(1), 591 592 /** 593 * @DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE: 594 * 595 * Data is driven on the rising edge of the pixel clock 596 */ 597 DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE = BIT(2), 598 599 /** 600 * @DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE: 601 * 602 * Data is driven on the falling edge of the pixel clock 603 */ 604 DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE = BIT(3), 605 606 /** 607 * @DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE: 608 * 609 * Data is sampled on the rising edge of the pixel clock 610 */ 611 DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, 612 613 /** 614 * @DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE: 615 * 616 * Data is sampled on the falling edge of the pixel clock 617 */ 618 DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, 619 620 /** 621 * @DRM_BUS_FLAG_DATA_MSB_TO_LSB: 622 * 623 * Data is transmitted MSB to LSB on the bus 624 */ 625 DRM_BUS_FLAG_DATA_MSB_TO_LSB = BIT(4), 626 627 /** 628 * @DRM_BUS_FLAG_DATA_LSB_TO_MSB: 629 * 630 * Data is transmitted LSB to MSB on the bus 631 */ 632 DRM_BUS_FLAG_DATA_LSB_TO_MSB = BIT(5), 633 634 /** 635 * @DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE: 636 * 637 * Sync signals are driven on the rising edge of the pixel clock 638 */ 639 DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE = BIT(6), 640 641 /** 642 * @DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE: 643 * 644 * Sync signals are driven on the falling edge of the pixel clock 645 */ 646 DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE = BIT(7), 647 648 /** 649 * @DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE: 650 * 651 * Sync signals are sampled on the rising edge of the pixel clock 652 */ 653 DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE = DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE, 654 655 /** 656 * @DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE: 657 * 658 * Sync signals are sampled on the falling edge of the pixel clock 659 */ 660 DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE = DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, 661 662 /** 663 * @DRM_BUS_FLAG_SHARP_SIGNALS: 664 * 665 * Set if the Sharp-specific signals (SPL, CLS, PS, REV) must be used 666 */ 667 DRM_BUS_FLAG_SHARP_SIGNALS = BIT(8), 668 }; 669 670 /** 671 * struct drm_display_info - runtime data about the connected sink 672 * 673 * Describes a given display (e.g. CRT or flat panel) and its limitations. For 674 * fixed display sinks like built-in panels there's not much difference between 675 * this and &struct drm_connector. But for sinks with a real cable this 676 * structure is meant to describe all the things at the other end of the cable. 677 * 678 * For sinks which provide an EDID this can be filled out by calling 679 * drm_add_edid_modes(). 680 */ 681 struct drm_display_info { 682 /** 683 * @width_mm: Physical width in mm. 684 */ 685 unsigned int width_mm; 686 687 /** 688 * @height_mm: Physical height in mm. 689 */ 690 unsigned int height_mm; 691 692 /** 693 * @bpc: Maximum bits per color channel. Used by HDMI and DP outputs. 694 */ 695 unsigned int bpc; 696 697 /** 698 * @subpixel_order: Subpixel order of LCD panels. 699 */ 700 enum subpixel_order subpixel_order; 701 702 #define DRM_COLOR_FORMAT_RGB444 (1<<0) 703 #define DRM_COLOR_FORMAT_YCBCR444 (1<<1) 704 #define DRM_COLOR_FORMAT_YCBCR422 (1<<2) 705 #define DRM_COLOR_FORMAT_YCBCR420 (1<<3) 706 707 /** 708 * @panel_orientation: Read only connector property for built-in panels, 709 * indicating the orientation of the panel vs the device's casing. 710 * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN. 711 * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the 712 * fb to compensate and gets exported as prop to userspace. 713 */ 714 int panel_orientation; 715 716 /** 717 * @color_formats: HDMI Color formats, selects between RGB and YCrCb 718 * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones 719 * as used to describe the pixel format in framebuffers, and also don't 720 * match the formats in @bus_formats which are shared with v4l. 721 */ 722 u32 color_formats; 723 724 /** 725 * @bus_formats: Pixel data format on the wire, somewhat redundant with 726 * @color_formats. Array of size @num_bus_formats encoded using 727 * MEDIA_BUS_FMT\_ defines shared with v4l and media drivers. 728 */ 729 const u32 *bus_formats; 730 /** 731 * @num_bus_formats: Size of @bus_formats array. 732 */ 733 unsigned int num_bus_formats; 734 735 /** 736 * @bus_flags: Additional information (like pixel signal polarity) for 737 * the pixel data on the bus, using &enum drm_bus_flags values 738 * DRM_BUS_FLAGS\_. 739 */ 740 u32 bus_flags; 741 742 /** 743 * @max_tmds_clock: Maximum TMDS clock rate supported by the 744 * sink in kHz. 0 means undefined. 745 */ 746 int max_tmds_clock; 747 748 /** 749 * @dvi_dual: Dual-link DVI sink? 750 */ 751 bool dvi_dual; 752 753 /** 754 * @is_hdmi: True if the sink is an HDMI device. 755 * 756 * This field shall be used instead of calling 757 * drm_detect_hdmi_monitor() when possible. 758 */ 759 bool is_hdmi; 760 761 /** 762 * @has_audio: True if the sink supports audio. 763 * 764 * This field shall be used instead of calling 765 * drm_detect_monitor_audio() when possible. 766 */ 767 bool has_audio; 768 769 /** 770 * @has_hdmi_infoframe: Does the sink support the HDMI infoframe? 771 */ 772 bool has_hdmi_infoframe; 773 774 /** 775 * @rgb_quant_range_selectable: Does the sink support selecting 776 * the RGB quantization range? 777 */ 778 bool rgb_quant_range_selectable; 779 780 /** 781 * @edid_hdmi_rgb444_dc_modes: Mask of supported hdmi deep color modes 782 * in RGB 4:4:4. Even more stuff redundant with @bus_formats. 783 */ 784 u8 edid_hdmi_rgb444_dc_modes; 785 786 /** 787 * @edid_hdmi_ycbcr444_dc_modes: Mask of supported hdmi deep color 788 * modes in YCbCr 4:4:4. Even more stuff redundant with @bus_formats. 789 */ 790 u8 edid_hdmi_ycbcr444_dc_modes; 791 792 /** 793 * @cea_rev: CEA revision of the HDMI sink. 794 */ 795 u8 cea_rev; 796 797 /** 798 * @hdmi: advance features of a HDMI sink. 799 */ 800 struct drm_hdmi_info hdmi; 801 802 /** 803 * @non_desktop: Non desktop display (HMD). 804 */ 805 bool non_desktop; 806 807 /** 808 * @monitor_range: Frequency range supported by monitor range descriptor 809 */ 810 struct drm_monitor_range_info monitor_range; 811 812 /** 813 * @luminance_range: Luminance range supported by panel 814 */ 815 struct drm_luminance_range_info luminance_range; 816 817 /** 818 * @mso_stream_count: eDP Multi-SST Operation (MSO) stream count from 819 * the DisplayID VESA vendor block. 0 for conventional Single-Stream 820 * Transport (SST), or 2 or 4 MSO streams. 821 */ 822 u8 mso_stream_count; 823 824 /** 825 * @mso_pixel_overlap: eDP MSO segment pixel overlap, 0-8 pixels. 826 */ 827 u8 mso_pixel_overlap; 828 829 /** 830 * @max_dsc_bpp: Maximum DSC target bitrate, if it is set to 0 the 831 * monitor's default value is used instead. 832 */ 833 u32 max_dsc_bpp; 834 835 /** 836 * @vics: Array of vics_len VICs. Internal to EDID parsing. 837 */ 838 u8 *vics; 839 840 /** 841 * @vics_len: Number of elements in vics. Internal to EDID parsing. 842 */ 843 int vics_len; 844 845 /** 846 * @quirks: EDID based quirks. Internal to EDID parsing. 847 */ 848 u32 quirks; 849 850 /** 851 * @source_physical_address: Source Physical Address from HDMI 852 * Vendor-Specific Data Block, for CEC usage. 853 * 854 * Defaults to CEC_PHYS_ADDR_INVALID (0xffff). 855 */ 856 u16 source_physical_address; 857 }; 858 859 int drm_display_info_set_bus_formats(struct drm_display_info *info, 860 const u32 *formats, 861 unsigned int num_formats); 862 863 /** 864 * struct drm_connector_tv_margins - TV connector related margins 865 * 866 * Describes the margins in pixels to put around the image on TV 867 * connectors to deal with overscan. 868 */ 869 struct drm_connector_tv_margins { 870 /** 871 * @bottom: Bottom margin in pixels. 872 */ 873 unsigned int bottom; 874 875 /** 876 * @left: Left margin in pixels. 877 */ 878 unsigned int left; 879 880 /** 881 * @right: Right margin in pixels. 882 */ 883 unsigned int right; 884 885 /** 886 * @top: Top margin in pixels. 887 */ 888 unsigned int top; 889 }; 890 891 /** 892 * struct drm_tv_connector_state - TV connector related states 893 * @select_subconnector: selected subconnector 894 * @subconnector: detected subconnector 895 * @margins: TV margins 896 * @legacy_mode: Legacy TV mode, driver specific value 897 * @mode: TV mode 898 * @brightness: brightness in percent 899 * @contrast: contrast in percent 900 * @flicker_reduction: flicker reduction in percent 901 * @overscan: overscan in percent 902 * @saturation: saturation in percent 903 * @hue: hue in percent 904 */ 905 struct drm_tv_connector_state { 906 enum drm_mode_subconnector select_subconnector; 907 enum drm_mode_subconnector subconnector; 908 struct drm_connector_tv_margins margins; 909 unsigned int legacy_mode; 910 unsigned int mode; 911 unsigned int brightness; 912 unsigned int contrast; 913 unsigned int flicker_reduction; 914 unsigned int overscan; 915 unsigned int saturation; 916 unsigned int hue; 917 }; 918 919 /** 920 * struct drm_connector_hdmi_infoframe - HDMI Infoframe container 921 */ 922 struct drm_connector_hdmi_infoframe { 923 /** 924 * @data: HDMI Infoframe structure 925 */ 926 union hdmi_infoframe data; 927 928 /** 929 * @set: Is the content of @data valid? 930 */ 931 bool set; 932 }; 933 934 /* 935 * struct drm_connector_hdmi_state - HDMI state container 936 */ 937 struct drm_connector_hdmi_state { 938 /** 939 * @broadcast_rgb: Connector property to pass the 940 * Broadcast RGB selection value. 941 */ 942 enum drm_hdmi_broadcast_rgb broadcast_rgb; 943 944 /** 945 * @infoframes: HDMI Infoframes matching that state 946 */ 947 struct { 948 /** 949 * @avi: AVI Infoframes structure matching our 950 * state. 951 */ 952 struct drm_connector_hdmi_infoframe avi; 953 954 /** 955 * @hdr_drm: DRM (Dynamic Range and Mastering) 956 * Infoframes structure matching our state. 957 */ 958 struct drm_connector_hdmi_infoframe hdr_drm; 959 960 /** 961 * @spd: SPD Infoframes structure matching our 962 * state. 963 */ 964 struct drm_connector_hdmi_infoframe spd; 965 966 /** 967 * @vendor: HDMI Vendor Infoframes structure 968 * matching our state. 969 */ 970 struct drm_connector_hdmi_infoframe hdmi; 971 } infoframes; 972 973 /** 974 * @is_limited_range: Is the output supposed to use a limited 975 * RGB Quantization Range or not? 976 */ 977 bool is_limited_range; 978 979 /** 980 * @output_bpc: Bits per color channel to output. 981 */ 982 unsigned int output_bpc; 983 984 /** 985 * @output_format: Pixel format to output in. 986 */ 987 enum hdmi_colorspace output_format; 988 989 /** 990 * @tmds_char_rate: TMDS Character Rate, in Hz. 991 */ 992 unsigned long long tmds_char_rate; 993 }; 994 995 /** 996 * struct drm_connector_state - mutable connector state 997 */ 998 struct drm_connector_state { 999 /** @connector: backpointer to the connector */ 1000 struct drm_connector *connector; 1001 1002 /** 1003 * @crtc: CRTC to connect connector to, NULL if disabled. 1004 * 1005 * Do not change this directly, use drm_atomic_set_crtc_for_connector() 1006 * instead. 1007 */ 1008 struct drm_crtc *crtc; 1009 1010 /** 1011 * @best_encoder: 1012 * 1013 * Used by the atomic helpers to select the encoder, through the 1014 * &drm_connector_helper_funcs.atomic_best_encoder or 1015 * &drm_connector_helper_funcs.best_encoder callbacks. 1016 * 1017 * This is also used in the atomic helpers to map encoders to their 1018 * current and previous connectors, see 1019 * drm_atomic_get_old_connector_for_encoder() and 1020 * drm_atomic_get_new_connector_for_encoder(). 1021 * 1022 * NOTE: Atomic drivers must fill this out (either themselves or through 1023 * helpers), for otherwise the GETCONNECTOR and GETENCODER IOCTLs will 1024 * not return correct data to userspace. 1025 */ 1026 struct drm_encoder *best_encoder; 1027 1028 /** 1029 * @link_status: Connector link_status to keep track of whether link is 1030 * GOOD or BAD to notify userspace if retraining is necessary. 1031 */ 1032 enum drm_link_status link_status; 1033 1034 /** @state: backpointer to global drm_atomic_state */ 1035 struct drm_atomic_state *state; 1036 1037 /** 1038 * @commit: Tracks the pending commit to prevent use-after-free conditions. 1039 * 1040 * Is only set when @crtc is NULL. 1041 */ 1042 struct drm_crtc_commit *commit; 1043 1044 /** @tv: TV connector state */ 1045 struct drm_tv_connector_state tv; 1046 1047 /** 1048 * @self_refresh_aware: 1049 * 1050 * This tracks whether a connector is aware of the self refresh state. 1051 * It should be set to true for those connector implementations which 1052 * understand the self refresh state. This is needed since the crtc 1053 * registers the self refresh helpers and it doesn't know if the 1054 * connectors downstream have implemented self refresh entry/exit. 1055 * 1056 * Drivers should set this to true in atomic_check if they know how to 1057 * handle self_refresh requests. 1058 */ 1059 bool self_refresh_aware; 1060 1061 /** 1062 * @picture_aspect_ratio: Connector property to control the 1063 * HDMI infoframe aspect ratio setting. 1064 * 1065 * The %DRM_MODE_PICTURE_ASPECT_\* values much match the 1066 * values for &enum hdmi_picture_aspect 1067 */ 1068 enum hdmi_picture_aspect picture_aspect_ratio; 1069 1070 /** 1071 * @content_type: Connector property to control the 1072 * HDMI infoframe content type setting. 1073 * The %DRM_MODE_CONTENT_TYPE_\* values much 1074 * match the values. 1075 */ 1076 unsigned int content_type; 1077 1078 /** 1079 * @hdcp_content_type: Connector property to pass the type of 1080 * protected content. This is most commonly used for HDCP. 1081 */ 1082 unsigned int hdcp_content_type; 1083 1084 /** 1085 * @scaling_mode: Connector property to control the 1086 * upscaling, mostly used for built-in panels. 1087 */ 1088 unsigned int scaling_mode; 1089 1090 /** 1091 * @content_protection: Connector property to request content 1092 * protection. This is most commonly used for HDCP. 1093 */ 1094 unsigned int content_protection; 1095 1096 /** 1097 * @colorspace: State variable for Connector property to request 1098 * colorspace change on Sink. This is most commonly used to switch 1099 * to wider color gamuts like BT2020. 1100 */ 1101 enum drm_colorspace colorspace; 1102 1103 /** 1104 * @writeback_job: Writeback job for writeback connectors 1105 * 1106 * Holds the framebuffer and out-fence for a writeback connector. As 1107 * the writeback completion may be asynchronous to the normal commit 1108 * cycle, the writeback job lifetime is managed separately from the 1109 * normal atomic state by this object. 1110 * 1111 * See also: drm_writeback_queue_job() and 1112 * drm_writeback_signal_completion() 1113 */ 1114 struct drm_writeback_job *writeback_job; 1115 1116 /** 1117 * @max_requested_bpc: Connector property to limit the maximum bit 1118 * depth of the pixels. 1119 */ 1120 u8 max_requested_bpc; 1121 1122 /** 1123 * @max_bpc: Connector max_bpc based on the requested max_bpc property 1124 * and the connector bpc limitations obtained from edid. 1125 */ 1126 u8 max_bpc; 1127 1128 /** 1129 * @privacy_screen_sw_state: See :ref:`Standard Connector 1130 * Properties<standard_connector_properties>` 1131 */ 1132 enum drm_privacy_screen_status privacy_screen_sw_state; 1133 1134 /** 1135 * @hdr_output_metadata: 1136 * DRM blob property for HDR output metadata 1137 */ 1138 struct drm_property_blob *hdr_output_metadata; 1139 1140 /** 1141 * @hdmi: HDMI-related variable and properties. Filled by 1142 * @drm_atomic_helper_connector_hdmi_check(). 1143 */ 1144 struct drm_connector_hdmi_state hdmi; 1145 }; 1146 1147 struct drm_connector_hdmi_audio_funcs { 1148 /** 1149 * @startup: 1150 * 1151 * Called when ASoC starts an audio stream setup. The 1152 * @startup() is optional. 1153 * 1154 * Returns: 1155 * 0 on success, a negative error code otherwise 1156 */ 1157 int (*startup)(struct drm_connector *connector); 1158 1159 /** 1160 * @prepare: 1161 * Configures HDMI-encoder for audio stream. Can be called 1162 * multiple times for each setup. Mandatory. 1163 * 1164 * Returns: 1165 * 0 on success, a negative error code otherwise 1166 */ 1167 int (*prepare)(struct drm_connector *connector, 1168 struct hdmi_codec_daifmt *fmt, 1169 struct hdmi_codec_params *hparms); 1170 1171 /** 1172 * @shutdown: 1173 * 1174 * Shut down the audio stream. Mandatory. 1175 * 1176 * Returns: 1177 * 0 on success, a negative error code otherwise 1178 */ 1179 void (*shutdown)(struct drm_connector *connector); 1180 1181 /** 1182 * @mute_stream: 1183 * 1184 * Mute/unmute HDMI audio stream. The @mute_stream callback is 1185 * optional. 1186 * 1187 * Returns: 1188 * 0 on success, a negative error code otherwise 1189 */ 1190 int (*mute_stream)(struct drm_connector *connector, 1191 bool enable, int direction); 1192 }; 1193 1194 void drm_connector_cec_phys_addr_invalidate(struct drm_connector *connector); 1195 void drm_connector_cec_phys_addr_set(struct drm_connector *connector); 1196 1197 /** 1198 * struct drm_connector_cec_funcs - drm_hdmi_connector control functions 1199 */ 1200 struct drm_connector_cec_funcs { 1201 /** 1202 * @phys_addr_invalidate: mark CEC physical address as invalid 1203 * 1204 * The callback to mark CEC physical address as invalid, abstracting 1205 * the operation. 1206 */ 1207 void (*phys_addr_invalidate)(struct drm_connector *connector); 1208 1209 /** 1210 * @phys_addr_set: set CEC physical address 1211 * 1212 * The callback to set CEC physical address, abstracting the operation. 1213 */ 1214 void (*phys_addr_set)(struct drm_connector *connector, u16 addr); 1215 }; 1216 1217 /** 1218 * struct drm_connector_hdmi_funcs - drm_hdmi_connector control functions 1219 */ 1220 struct drm_connector_hdmi_funcs { 1221 /** 1222 * @tmds_char_rate_valid: 1223 * 1224 * This callback is invoked at atomic_check time to figure out 1225 * whether a particular TMDS character rate is supported by the 1226 * driver. 1227 * 1228 * The @tmds_char_rate_valid callback is optional. 1229 * 1230 * Returns: 1231 * 1232 * Either &drm_mode_status.MODE_OK or one of the failure reasons 1233 * in &enum drm_mode_status. 1234 */ 1235 enum drm_mode_status 1236 (*tmds_char_rate_valid)(const struct drm_connector *connector, 1237 const struct drm_display_mode *mode, 1238 unsigned long long tmds_rate); 1239 1240 /** 1241 * @clear_infoframe: 1242 * 1243 * This callback is invoked through 1244 * @drm_atomic_helper_connector_hdmi_update_infoframes during a 1245 * commit to clear the infoframes into the hardware. It will be 1246 * called multiple times, once for every disabled infoframe 1247 * type. 1248 * 1249 * The @clear_infoframe callback is optional. 1250 * 1251 * Returns: 1252 * 0 on success, a negative error code otherwise 1253 */ 1254 int (*clear_infoframe)(struct drm_connector *connector, 1255 enum hdmi_infoframe_type type); 1256 1257 /** 1258 * @write_infoframe: 1259 * 1260 * This callback is invoked through 1261 * @drm_atomic_helper_connector_hdmi_update_infoframes during a 1262 * commit to program the infoframes into the hardware. It will 1263 * be called multiple times, once for every updated infoframe 1264 * type. 1265 * 1266 * The @write_infoframe callback is mandatory. 1267 * 1268 * Returns: 1269 * 0 on success, a negative error code otherwise 1270 */ 1271 int (*write_infoframe)(struct drm_connector *connector, 1272 enum hdmi_infoframe_type type, 1273 const u8 *buffer, size_t len); 1274 1275 /** 1276 * @read_edid: 1277 * 1278 * This callback is used by the framework as a replacement for reading 1279 * the EDID from connector->ddc. It is still recommended to provide 1280 * connector->ddc instead of implementing this callback. Returned EDID 1281 * should be freed via the drm_edid_free(). 1282 * 1283 * The @read_edid callback is optional. 1284 * 1285 * Returns: 1286 * Valid EDID on success, NULL in case of failure. 1287 */ 1288 const struct drm_edid *(*read_edid)(struct drm_connector *connector); 1289 }; 1290 1291 /** 1292 * struct drm_connector_funcs - control connectors on a given device 1293 * 1294 * Each CRTC may have one or more connectors attached to it. The functions 1295 * below allow the core DRM code to control connectors, enumerate available modes, 1296 * etc. 1297 */ 1298 struct drm_connector_funcs { 1299 /** 1300 * @dpms: 1301 * 1302 * Legacy entry point to set the per-connector DPMS state. Legacy DPMS 1303 * is exposed as a standard property on the connector, but diverted to 1304 * this callback in the drm core. Note that atomic drivers don't 1305 * implement the 4 level DPMS support on the connector any more, but 1306 * instead only have an on/off "ACTIVE" property on the CRTC object. 1307 * 1308 * This hook is not used by atomic drivers, remapping of the legacy DPMS 1309 * property is entirely handled in the DRM core. 1310 * 1311 * RETURNS: 1312 * 1313 * 0 on success or a negative error code on failure. 1314 */ 1315 int (*dpms)(struct drm_connector *connector, int mode); 1316 1317 /** 1318 * @reset: 1319 * 1320 * Reset connector hardware and software state to off. This function isn't 1321 * called by the core directly, only through drm_mode_config_reset(). 1322 * It's not a helper hook only for historical reasons. 1323 * 1324 * Atomic drivers can use drm_atomic_helper_connector_reset() to reset 1325 * atomic state using this hook. 1326 */ 1327 void (*reset)(struct drm_connector *connector); 1328 1329 /** 1330 * @detect: 1331 * 1332 * Check to see if anything is attached to the connector. The parameter 1333 * force is set to false whilst polling, true when checking the 1334 * connector due to a user request. force can be used by the driver to 1335 * avoid expensive, destructive operations during automated probing. 1336 * 1337 * This callback is optional, if not implemented the connector will be 1338 * considered as always being attached. 1339 * 1340 * FIXME: 1341 * 1342 * Note that this hook is only called by the probe helper. It's not in 1343 * the helper library vtable purely for historical reasons. The only DRM 1344 * core entry point to probe connector state is @fill_modes. 1345 * 1346 * Note that the helper library will already hold 1347 * &drm_mode_config.connection_mutex. Drivers which need to grab additional 1348 * locks to avoid races with concurrent modeset changes need to use 1349 * &drm_connector_helper_funcs.detect_ctx instead. 1350 * 1351 * Also note that this callback can be called no matter the 1352 * state the connector is in. Drivers that need the underlying 1353 * device to be powered to perform the detection will first need 1354 * to make sure it's been properly enabled. 1355 * 1356 * RETURNS: 1357 * 1358 * drm_connector_status indicating the connector's status. 1359 */ 1360 enum drm_connector_status (*detect)(struct drm_connector *connector, 1361 bool force); 1362 1363 /** 1364 * @force: 1365 * 1366 * This function is called to update internal encoder state when the 1367 * connector is forced to a certain state by userspace, either through 1368 * the sysfs interfaces or on the kernel cmdline. In that case the 1369 * @detect callback isn't called. 1370 * 1371 * FIXME: 1372 * 1373 * Note that this hook is only called by the probe helper. It's not in 1374 * the helper library vtable purely for historical reasons. The only DRM 1375 * core entry point to probe connector state is @fill_modes. 1376 */ 1377 void (*force)(struct drm_connector *connector); 1378 1379 /** 1380 * @fill_modes: 1381 * 1382 * Entry point for output detection and basic mode validation. The 1383 * driver should reprobe the output if needed (e.g. when hotplug 1384 * handling is unreliable), add all detected modes to &drm_connector.modes 1385 * and filter out any the device can't support in any configuration. It 1386 * also needs to filter out any modes wider or higher than the 1387 * parameters max_width and max_height indicate. 1388 * 1389 * The drivers must also prune any modes no longer valid from 1390 * &drm_connector.modes. Furthermore it must update 1391 * &drm_connector.status and &drm_connector.edid. If no EDID has been 1392 * received for this output connector->edid must be NULL. 1393 * 1394 * Drivers using the probe helpers should use 1395 * drm_helper_probe_single_connector_modes() to implement this 1396 * function. 1397 * 1398 * RETURNS: 1399 * 1400 * The number of modes detected and filled into &drm_connector.modes. 1401 */ 1402 int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); 1403 1404 /** 1405 * @set_property: 1406 * 1407 * This is the legacy entry point to update a property attached to the 1408 * connector. 1409 * 1410 * This callback is optional if the driver does not support any legacy 1411 * driver-private properties. For atomic drivers it is not used because 1412 * property handling is done entirely in the DRM core. 1413 * 1414 * RETURNS: 1415 * 1416 * 0 on success or a negative error code on failure. 1417 */ 1418 int (*set_property)(struct drm_connector *connector, struct drm_property *property, 1419 uint64_t val); 1420 1421 /** 1422 * @late_register: 1423 * 1424 * This optional hook can be used to register additional userspace 1425 * interfaces attached to the connector, light backlight control, i2c, 1426 * DP aux or similar interfaces. It is called late in the driver load 1427 * sequence from drm_connector_register() when registering all the 1428 * core drm connector interfaces. Everything added from this callback 1429 * should be unregistered in the early_unregister callback. 1430 * 1431 * This is called while holding &drm_connector.mutex. 1432 * 1433 * Returns: 1434 * 1435 * 0 on success, or a negative error code on failure. 1436 */ 1437 int (*late_register)(struct drm_connector *connector); 1438 1439 /** 1440 * @early_unregister: 1441 * 1442 * This optional hook should be used to unregister the additional 1443 * userspace interfaces attached to the connector from 1444 * late_register(). It is called from drm_connector_unregister(), 1445 * early in the driver unload sequence to disable userspace access 1446 * before data structures are torndown. 1447 * 1448 * This is called while holding &drm_connector.mutex. 1449 */ 1450 void (*early_unregister)(struct drm_connector *connector); 1451 1452 /** 1453 * @destroy: 1454 * 1455 * Clean up connector resources. This is called at driver unload time 1456 * through drm_mode_config_cleanup(). It can also be called at runtime 1457 * when a connector is being hot-unplugged for drivers that support 1458 * connector hotplugging (e.g. DisplayPort MST). 1459 */ 1460 void (*destroy)(struct drm_connector *connector); 1461 1462 /** 1463 * @atomic_duplicate_state: 1464 * 1465 * Duplicate the current atomic state for this connector and return it. 1466 * The core and helpers guarantee that any atomic state duplicated with 1467 * this hook and still owned by the caller (i.e. not transferred to the 1468 * driver by calling &drm_mode_config_funcs.atomic_commit) will be 1469 * cleaned up by calling the @atomic_destroy_state hook in this 1470 * structure. 1471 * 1472 * This callback is mandatory for atomic drivers. 1473 * 1474 * Atomic drivers which don't subclass &struct drm_connector_state should use 1475 * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the 1476 * state structure to extend it with driver-private state should use 1477 * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is 1478 * duplicated in a consistent fashion across drivers. 1479 * 1480 * It is an error to call this hook before &drm_connector.state has been 1481 * initialized correctly. 1482 * 1483 * NOTE: 1484 * 1485 * If the duplicate state references refcounted resources this hook must 1486 * acquire a reference for each of them. The driver must release these 1487 * references again in @atomic_destroy_state. 1488 * 1489 * RETURNS: 1490 * 1491 * Duplicated atomic state or NULL when the allocation failed. 1492 */ 1493 struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector); 1494 1495 /** 1496 * @atomic_destroy_state: 1497 * 1498 * Destroy a state duplicated with @atomic_duplicate_state and release 1499 * or unreference all resources it references 1500 * 1501 * This callback is mandatory for atomic drivers. 1502 */ 1503 void (*atomic_destroy_state)(struct drm_connector *connector, 1504 struct drm_connector_state *state); 1505 1506 /** 1507 * @atomic_set_property: 1508 * 1509 * Decode a driver-private property value and store the decoded value 1510 * into the passed-in state structure. Since the atomic core decodes all 1511 * standardized properties (even for extensions beyond the core set of 1512 * properties which might not be implemented by all drivers) this 1513 * requires drivers to subclass the state structure. 1514 * 1515 * Such driver-private properties should really only be implemented for 1516 * truly hardware/vendor specific state. Instead it is preferred to 1517 * standardize atomic extension and decode the properties used to expose 1518 * such an extension in the core. 1519 * 1520 * Do not call this function directly, use 1521 * drm_atomic_connector_set_property() instead. 1522 * 1523 * This callback is optional if the driver does not support any 1524 * driver-private atomic properties. 1525 * 1526 * NOTE: 1527 * 1528 * This function is called in the state assembly phase of atomic 1529 * modesets, which can be aborted for any reason (including on 1530 * userspace's request to just check whether a configuration would be 1531 * possible). Drivers MUST NOT touch any persistent state (hardware or 1532 * software) or data structures except the passed in @state parameter. 1533 * 1534 * Also since userspace controls in which order properties are set this 1535 * function must not do any input validation (since the state update is 1536 * incomplete and hence likely inconsistent). Instead any such input 1537 * validation must be done in the various atomic_check callbacks. 1538 * 1539 * RETURNS: 1540 * 1541 * 0 if the property has been found, -EINVAL if the property isn't 1542 * implemented by the driver (which shouldn't ever happen, the core only 1543 * asks for properties attached to this connector). No other validation 1544 * is allowed by the driver. The core already checks that the property 1545 * value is within the range (integer, valid enum value, ...) the driver 1546 * set when registering the property. 1547 */ 1548 int (*atomic_set_property)(struct drm_connector *connector, 1549 struct drm_connector_state *state, 1550 struct drm_property *property, 1551 uint64_t val); 1552 1553 /** 1554 * @atomic_get_property: 1555 * 1556 * Reads out the decoded driver-private property. This is used to 1557 * implement the GETCONNECTOR IOCTL. 1558 * 1559 * Do not call this function directly, use 1560 * drm_atomic_connector_get_property() instead. 1561 * 1562 * This callback is optional if the driver does not support any 1563 * driver-private atomic properties. 1564 * 1565 * RETURNS: 1566 * 1567 * 0 on success, -EINVAL if the property isn't implemented by the 1568 * driver (which shouldn't ever happen, the core only asks for 1569 * properties attached to this connector). 1570 */ 1571 int (*atomic_get_property)(struct drm_connector *connector, 1572 const struct drm_connector_state *state, 1573 struct drm_property *property, 1574 uint64_t *val); 1575 1576 /** 1577 * @atomic_print_state: 1578 * 1579 * If driver subclasses &struct drm_connector_state, it should implement 1580 * this optional hook for printing additional driver specific state. 1581 * 1582 * Do not call this directly, use drm_atomic_connector_print_state() 1583 * instead. 1584 */ 1585 void (*atomic_print_state)(struct drm_printer *p, 1586 const struct drm_connector_state *state); 1587 1588 /** 1589 * @oob_hotplug_event: 1590 * 1591 * This will get called when a hotplug-event for a drm-connector 1592 * has been received from a source outside the display driver / device. 1593 */ 1594 void (*oob_hotplug_event)(struct drm_connector *connector, 1595 enum drm_connector_status status); 1596 1597 /** 1598 * @debugfs_init: 1599 * 1600 * Allows connectors to create connector-specific debugfs files. 1601 */ 1602 void (*debugfs_init)(struct drm_connector *connector, struct dentry *root); 1603 }; 1604 1605 /** 1606 * struct drm_cmdline_mode - DRM Mode passed through the kernel command-line 1607 * 1608 * Each connector can have an initial mode with additional options 1609 * passed through the kernel command line. This structure allows to 1610 * express those parameters and will be filled by the command-line 1611 * parser. 1612 */ 1613 struct drm_cmdline_mode { 1614 /** 1615 * @name: 1616 * 1617 * Name of the mode. 1618 */ 1619 char name[DRM_DISPLAY_MODE_LEN]; 1620 1621 /** 1622 * @specified: 1623 * 1624 * Has a mode been read from the command-line? 1625 */ 1626 bool specified; 1627 1628 /** 1629 * @refresh_specified: 1630 * 1631 * Did the mode have a preferred refresh rate? 1632 */ 1633 bool refresh_specified; 1634 1635 /** 1636 * @bpp_specified: 1637 * 1638 * Did the mode have a preferred BPP? 1639 */ 1640 bool bpp_specified; 1641 1642 /** 1643 * @pixel_clock: 1644 * 1645 * Pixel Clock in kHz. Optional. 1646 */ 1647 unsigned int pixel_clock; 1648 1649 /** 1650 * @xres: 1651 * 1652 * Active resolution on the X axis, in pixels. 1653 */ 1654 int xres; 1655 1656 /** 1657 * @yres: 1658 * 1659 * Active resolution on the Y axis, in pixels. 1660 */ 1661 int yres; 1662 1663 /** 1664 * @bpp: 1665 * 1666 * Bits per pixels for the mode. 1667 */ 1668 int bpp; 1669 1670 /** 1671 * @refresh: 1672 * 1673 * Refresh rate, in Hertz. 1674 */ 1675 int refresh; 1676 1677 /** 1678 * @rb: 1679 * 1680 * Do we need to use reduced blanking? 1681 */ 1682 bool rb; 1683 1684 /** 1685 * @interlace: 1686 * 1687 * The mode is interlaced. 1688 */ 1689 bool interlace; 1690 1691 /** 1692 * @cvt: 1693 * 1694 * The timings will be calculated using the VESA Coordinated 1695 * Video Timings instead of looking up the mode from a table. 1696 */ 1697 bool cvt; 1698 1699 /** 1700 * @margins: 1701 * 1702 * Add margins to the mode calculation (1.8% of xres rounded 1703 * down to 8 pixels and 1.8% of yres). 1704 */ 1705 bool margins; 1706 1707 /** 1708 * @force: 1709 * 1710 * Ignore the hotplug state of the connector, and force its 1711 * state to one of the DRM_FORCE_* values. 1712 */ 1713 enum drm_connector_force force; 1714 1715 /** 1716 * @rotation_reflection: 1717 * 1718 * Initial rotation and reflection of the mode setup from the 1719 * command line. See DRM_MODE_ROTATE_* and 1720 * DRM_MODE_REFLECT_*. The only rotations supported are 1721 * DRM_MODE_ROTATE_0 and DRM_MODE_ROTATE_180. 1722 */ 1723 unsigned int rotation_reflection; 1724 1725 /** 1726 * @panel_orientation: 1727 * 1728 * drm-connector "panel orientation" property override value, 1729 * DRM_MODE_PANEL_ORIENTATION_UNKNOWN if not set. 1730 */ 1731 enum drm_panel_orientation panel_orientation; 1732 1733 /** 1734 * @tv_margins: TV margins to apply to the mode. 1735 */ 1736 struct drm_connector_tv_margins tv_margins; 1737 1738 /** 1739 * @tv_mode: TV mode standard. See DRM_MODE_TV_MODE_*. 1740 */ 1741 enum drm_connector_tv_mode tv_mode; 1742 1743 /** 1744 * @tv_mode_specified: 1745 * 1746 * Did the mode have a preferred TV mode? 1747 */ 1748 bool tv_mode_specified; 1749 }; 1750 1751 /** 1752 * struct drm_connector_hdmi_audio - DRM gemeric HDMI Codec-related structure 1753 * 1754 * HDMI drivers usually incorporate a HDMI Codec. This structure expresses the 1755 * generic HDMI Codec as used by the DRM HDMI Codec framework. 1756 */ 1757 struct drm_connector_hdmi_audio { 1758 /** 1759 * @funcs: 1760 * 1761 * Implementation of the HDMI codec functionality to be used by the DRM 1762 * HDMI Codec framework. 1763 */ 1764 const struct drm_connector_hdmi_audio_funcs *funcs; 1765 1766 /** 1767 * @codec_pdev: 1768 * 1769 * Platform device created to hold the HDMI Codec. It will be 1770 * automatically unregistered during drm_connector_cleanup(). 1771 */ 1772 struct platform_device *codec_pdev; 1773 1774 /** 1775 * @lock: 1776 * 1777 * Mutex to protect @last_state, @plugged_cb and @plugged_cb_dev. 1778 */ 1779 struct mutex lock; 1780 1781 /** 1782 * @plugged_cb: 1783 * 1784 * Callback to be called when the HDMI sink get plugged to or unplugged 1785 * from this connector. This is assigned by the framework when 1786 * requested by the ASoC code. 1787 */ 1788 void (*plugged_cb)(struct device *dev, bool plugged); 1789 1790 /** 1791 * @plugged_cb_dev: 1792 * 1793 * The data for @plugged_cb(). It is being provided by the ASoC. 1794 */ 1795 struct device *plugged_cb_dev; 1796 1797 /** 1798 * @last_state: 1799 * 1800 * Last plugged state recored by the framework. It is used to correctly 1801 * report the state to @plugged_cb(). 1802 */ 1803 bool last_state; 1804 1805 /** 1806 * @dai_port: 1807 * 1808 * The port in DT that is used for the Codec DAI. 1809 */ 1810 int dai_port; 1811 }; 1812 1813 /* 1814 * struct drm_connector_hdmi - DRM Connector HDMI-related structure 1815 */ 1816 struct drm_connector_hdmi { 1817 #define DRM_CONNECTOR_HDMI_VENDOR_LEN 8 1818 /** 1819 * @vendor: HDMI Controller Vendor Name 1820 */ 1821 unsigned char vendor[DRM_CONNECTOR_HDMI_VENDOR_LEN] __nonstring; 1822 1823 #define DRM_CONNECTOR_HDMI_PRODUCT_LEN 16 1824 /** 1825 * @product: HDMI Controller Product Name 1826 */ 1827 unsigned char product[DRM_CONNECTOR_HDMI_PRODUCT_LEN] __nonstring; 1828 1829 /** 1830 * @supported_formats: Bitmask of @hdmi_colorspace 1831 * supported by the controller. 1832 */ 1833 unsigned long supported_formats; 1834 1835 /** 1836 * @funcs: HDMI connector Control Functions 1837 */ 1838 const struct drm_connector_hdmi_funcs *funcs; 1839 1840 /** 1841 * @infoframes: Current Infoframes output by the connector 1842 */ 1843 struct { 1844 /** 1845 * @lock: Mutex protecting against concurrent access to 1846 * the infoframes, most notably between KMS and ALSA. 1847 */ 1848 struct mutex lock; 1849 1850 /** 1851 * @audio: Current Audio Infoframes structure. Protected 1852 * by @lock. 1853 */ 1854 struct drm_connector_hdmi_infoframe audio; 1855 } infoframes; 1856 }; 1857 1858 /** 1859 * struct drm_connector_cec - DRM Connector CEC-related structure 1860 */ 1861 struct drm_connector_cec { 1862 /** 1863 * @mutex: protects all fields in this structure. 1864 */ 1865 struct mutex mutex; 1866 1867 /** 1868 * @funcs: CEC Control Functions 1869 */ 1870 const struct drm_connector_cec_funcs *funcs; 1871 1872 /** 1873 * @data: CEC implementation-specific data 1874 */ 1875 void *data; 1876 }; 1877 1878 /** 1879 * struct drm_connector - central DRM connector control structure 1880 * 1881 * Each connector may be connected to one or more CRTCs, or may be clonable by 1882 * another connector if they can share a CRTC. Each connector also has a specific 1883 * position in the broader display (referred to as a 'screen' though it could 1884 * span multiple monitors). 1885 */ 1886 struct drm_connector { 1887 /** @dev: parent DRM device */ 1888 struct drm_device *dev; 1889 /** @kdev: kernel device for sysfs attributes */ 1890 struct device *kdev; 1891 /** @attr: sysfs attributes */ 1892 struct device_attribute *attr; 1893 /** 1894 * @fwnode: associated fwnode supplied by platform firmware 1895 * 1896 * Drivers can set this to associate a fwnode with a connector, drivers 1897 * are expected to get a reference on the fwnode when setting this. 1898 * drm_connector_cleanup() will call fwnode_handle_put() on this. 1899 */ 1900 struct fwnode_handle *fwnode; 1901 1902 /** 1903 * @head: 1904 * 1905 * List of all connectors on a @dev, linked from 1906 * &drm_mode_config.connector_list. Protected by 1907 * &drm_mode_config.connector_list_lock, but please only use 1908 * &drm_connector_list_iter to walk this list. 1909 */ 1910 struct list_head head; 1911 1912 /** 1913 * @global_connector_list_entry: 1914 * 1915 * Connector entry in the global connector-list, used by 1916 * drm_connector_find_by_fwnode(). 1917 */ 1918 struct list_head global_connector_list_entry; 1919 1920 /** @base: base KMS object */ 1921 struct drm_mode_object base; 1922 1923 /** @name: human readable name, can be overwritten by the driver */ 1924 char *name; 1925 1926 /** 1927 * @mutex: Lock for general connector state, but currently only protects 1928 * @registered. Most of the connector state is still protected by 1929 * &drm_mode_config.mutex. 1930 */ 1931 struct mutex mutex; 1932 1933 /** 1934 * @index: Compacted connector index, which matches the position inside 1935 * the mode_config.list for drivers not supporting hot-add/removing. Can 1936 * be used as an array index. It is invariant over the lifetime of the 1937 * connector. 1938 */ 1939 unsigned index; 1940 1941 /** 1942 * @connector_type: 1943 * one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h 1944 */ 1945 int connector_type; 1946 /** @connector_type_id: index into connector type enum */ 1947 int connector_type_id; 1948 /** 1949 * @interlace_allowed: 1950 * Can this connector handle interlaced modes? Only used by 1951 * drm_helper_probe_single_connector_modes() for mode filtering. 1952 */ 1953 bool interlace_allowed; 1954 /** 1955 * @doublescan_allowed: 1956 * Can this connector handle doublescan? Only used by 1957 * drm_helper_probe_single_connector_modes() for mode filtering. 1958 */ 1959 bool doublescan_allowed; 1960 /** 1961 * @stereo_allowed: 1962 * Can this connector handle stereo modes? Only used by 1963 * drm_helper_probe_single_connector_modes() for mode filtering. 1964 */ 1965 bool stereo_allowed; 1966 1967 /** 1968 * @ycbcr_420_allowed : This bool indicates if this connector is 1969 * capable of handling YCBCR 420 output. While parsing the EDID 1970 * blocks it's very helpful to know if the source is capable of 1971 * handling YCBCR 420 outputs. 1972 */ 1973 bool ycbcr_420_allowed; 1974 1975 /** 1976 * @registration_state: Is this connector initializing, exposed 1977 * (registered) with userspace, or unregistered? 1978 * 1979 * Protected by @mutex. 1980 */ 1981 enum drm_connector_registration_state registration_state; 1982 1983 /** 1984 * @modes: 1985 * Modes available on this connector (from fill_modes() + user). 1986 * Protected by &drm_mode_config.mutex. 1987 */ 1988 struct list_head modes; 1989 1990 /** 1991 * @status: 1992 * One of the drm_connector_status enums (connected, not, or unknown). 1993 * Protected by &drm_mode_config.mutex. 1994 */ 1995 enum drm_connector_status status; 1996 1997 /** 1998 * @probed_modes: 1999 * These are modes added by probing with DDC or the BIOS, before 2000 * filtering is applied. Used by the probe helpers. Protected by 2001 * &drm_mode_config.mutex. 2002 */ 2003 struct list_head probed_modes; 2004 2005 /** 2006 * @display_info: Display information is filled from EDID information 2007 * when a display is detected. For non hot-pluggable displays such as 2008 * flat panels in embedded systems, the driver should initialize the 2009 * &drm_display_info.width_mm and &drm_display_info.height_mm fields 2010 * with the physical size of the display. 2011 * 2012 * Protected by &drm_mode_config.mutex. 2013 */ 2014 struct drm_display_info display_info; 2015 2016 /** @funcs: connector control functions */ 2017 const struct drm_connector_funcs *funcs; 2018 2019 /** 2020 * @edid_blob_ptr: DRM property containing EDID if present. Protected by 2021 * &drm_mode_config.mutex. 2022 * 2023 * This must be updated only by calling drm_edid_connector_update() or 2024 * drm_connector_update_edid_property(). 2025 * 2026 * This must not be used by drivers directly. 2027 */ 2028 struct drm_property_blob *edid_blob_ptr; 2029 2030 /** @properties: property tracking for this connector */ 2031 struct drm_object_properties properties; 2032 2033 /** 2034 * @scaling_mode_property: Optional atomic property to control the 2035 * upscaling. See drm_connector_attach_content_protection_property(). 2036 */ 2037 struct drm_property *scaling_mode_property; 2038 2039 /** 2040 * @vrr_capable_property: Optional property to help userspace 2041 * query hardware support for variable refresh rate on a connector. 2042 * connector. Drivers can add the property to a connector by 2043 * calling drm_connector_attach_vrr_capable_property(). 2044 * 2045 * This should be updated only by calling 2046 * drm_connector_set_vrr_capable_property(). 2047 */ 2048 struct drm_property *vrr_capable_property; 2049 2050 /** 2051 * @colorspace_property: Connector property to set the suitable 2052 * colorspace supported by the sink. 2053 */ 2054 struct drm_property *colorspace_property; 2055 2056 /** 2057 * @path_blob_ptr: 2058 * 2059 * DRM blob property data for the DP MST path property. This should only 2060 * be updated by calling drm_connector_set_path_property(). 2061 */ 2062 struct drm_property_blob *path_blob_ptr; 2063 2064 /** 2065 * @max_bpc: Maximum bits per color channel the connector supports. 2066 */ 2067 unsigned int max_bpc; 2068 2069 /** 2070 * @max_bpc_property: Default connector property for the max bpc to be 2071 * driven out of the connector. 2072 */ 2073 struct drm_property *max_bpc_property; 2074 2075 /** @privacy_screen: drm_privacy_screen for this connector, or NULL. */ 2076 struct drm_privacy_screen *privacy_screen; 2077 2078 /** @privacy_screen_notifier: privacy-screen notifier_block */ 2079 struct notifier_block privacy_screen_notifier; 2080 2081 /** 2082 * @privacy_screen_sw_state_property: Optional atomic property for the 2083 * connector to control the integrated privacy screen. 2084 */ 2085 struct drm_property *privacy_screen_sw_state_property; 2086 2087 /** 2088 * @privacy_screen_hw_state_property: Optional atomic property for the 2089 * connector to report the actual integrated privacy screen state. 2090 */ 2091 struct drm_property *privacy_screen_hw_state_property; 2092 2093 /** 2094 * @broadcast_rgb_property: Connector property to set the 2095 * Broadcast RGB selection to output with. 2096 */ 2097 struct drm_property *broadcast_rgb_property; 2098 2099 #define DRM_CONNECTOR_POLL_HPD (1 << 0) 2100 #define DRM_CONNECTOR_POLL_CONNECT (1 << 1) 2101 #define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2) 2102 2103 /** 2104 * @polled: 2105 * 2106 * Connector polling mode, a combination of 2107 * 2108 * DRM_CONNECTOR_POLL_HPD 2109 * The connector generates hotplug events and doesn't need to be 2110 * periodically polled. The CONNECT and DISCONNECT flags must not 2111 * be set together with the HPD flag. 2112 * 2113 * DRM_CONNECTOR_POLL_CONNECT 2114 * Periodically poll the connector for connection. 2115 * 2116 * DRM_CONNECTOR_POLL_DISCONNECT 2117 * Periodically poll the connector for disconnection, without 2118 * causing flickering even when the connector is in use. DACs should 2119 * rarely do this without a lot of testing. 2120 * 2121 * Set to 0 for connectors that don't support connection status 2122 * discovery. 2123 */ 2124 uint8_t polled; 2125 2126 /** 2127 * @dpms: Current dpms state. For legacy drivers the 2128 * &drm_connector_funcs.dpms callback must update this. For atomic 2129 * drivers, this is handled by the core atomic code, and drivers must 2130 * only take &drm_crtc_state.active into account. 2131 */ 2132 int dpms; 2133 2134 /** @helper_private: mid-layer private data */ 2135 const struct drm_connector_helper_funcs *helper_private; 2136 2137 /** @cmdline_mode: mode line parsed from the kernel cmdline for this connector */ 2138 struct drm_cmdline_mode cmdline_mode; 2139 /** @force: a DRM_FORCE_<foo> state for forced mode sets */ 2140 enum drm_connector_force force; 2141 2142 /** 2143 * @edid_override: Override EDID set via debugfs. 2144 * 2145 * Do not modify or access outside of the drm_edid_override_* family of 2146 * functions. 2147 */ 2148 const struct drm_edid *edid_override; 2149 2150 /** 2151 * @edid_override_mutex: Protect access to edid_override. 2152 */ 2153 struct mutex edid_override_mutex; 2154 2155 /** @epoch_counter: used to detect any other changes in connector, besides status */ 2156 u64 epoch_counter; 2157 2158 /** 2159 * @possible_encoders: Bit mask of encoders that can drive this 2160 * connector, drm_encoder_index() determines the index into the bitfield 2161 * and the bits are set with drm_connector_attach_encoder(). 2162 */ 2163 u32 possible_encoders; 2164 2165 /** 2166 * @encoder: Currently bound encoder driving this connector, if any. 2167 * Only really meaningful for non-atomic drivers. Atomic drivers should 2168 * instead look at &drm_connector_state.best_encoder, and in case they 2169 * need the CRTC driving this output, &drm_connector_state.crtc. 2170 */ 2171 struct drm_encoder *encoder; 2172 2173 #define MAX_ELD_BYTES 128 2174 /** @eld: EDID-like data, if present, protected by @eld_mutex */ 2175 uint8_t eld[MAX_ELD_BYTES]; 2176 /** @eld_mutex: protection for concurrenct access to @eld */ 2177 struct mutex eld_mutex; 2178 2179 /** @latency_present: AV delay info from ELD, if found */ 2180 bool latency_present[2]; 2181 /** 2182 * @video_latency: Video latency info from ELD, if found. 2183 * [0]: progressive, [1]: interlaced 2184 */ 2185 int video_latency[2]; 2186 /** 2187 * @audio_latency: audio latency info from ELD, if found 2188 * [0]: progressive, [1]: interlaced 2189 */ 2190 int audio_latency[2]; 2191 2192 /** 2193 * @ddc: associated ddc adapter. 2194 * A connector usually has its associated ddc adapter. If a driver uses 2195 * this field, then an appropriate symbolic link is created in connector 2196 * sysfs directory to make it easy for the user to tell which i2c 2197 * adapter is for a particular display. 2198 * 2199 * The field should be set by calling drm_connector_init_with_ddc(). 2200 */ 2201 struct i2c_adapter *ddc; 2202 2203 /** 2204 * @null_edid_counter: track sinks that give us all zeros for the EDID. 2205 * Needed to workaround some HW bugs where we get all 0s 2206 */ 2207 int null_edid_counter; 2208 2209 /** @bad_edid_counter: track sinks that give us an EDID with invalid checksum */ 2210 unsigned bad_edid_counter; 2211 2212 /** 2213 * @edid_corrupt: Indicates whether the last read EDID was corrupt. Used 2214 * in Displayport compliance testing - Displayport Link CTS Core 1.2 2215 * rev1.1 4.2.2.6 2216 */ 2217 bool edid_corrupt; 2218 /** 2219 * @real_edid_checksum: real edid checksum for corrupted edid block. 2220 * Required in Displayport 1.4 compliance testing 2221 * rev1.1 4.2.2.6 2222 */ 2223 u8 real_edid_checksum; 2224 2225 /** @debugfs_entry: debugfs directory for this connector */ 2226 struct dentry *debugfs_entry; 2227 2228 /** 2229 * @state: 2230 * 2231 * Current atomic state for this connector. 2232 * 2233 * This is protected by &drm_mode_config.connection_mutex. Note that 2234 * nonblocking atomic commits access the current connector state without 2235 * taking locks. Either by going through the &struct drm_atomic_state 2236 * pointers, see for_each_oldnew_connector_in_state(), 2237 * for_each_old_connector_in_state() and 2238 * for_each_new_connector_in_state(). Or through careful ordering of 2239 * atomic commit operations as implemented in the atomic helpers, see 2240 * &struct drm_crtc_commit. 2241 */ 2242 struct drm_connector_state *state; 2243 2244 /* DisplayID bits. FIXME: Extract into a substruct? */ 2245 2246 /** 2247 * @tile_blob_ptr: 2248 * 2249 * DRM blob property data for the tile property (used mostly by DP MST). 2250 * This is meant for screens which are driven through separate display 2251 * pipelines represented by &drm_crtc, which might not be running with 2252 * genlocked clocks. For tiled panels which are genlocked, like 2253 * dual-link LVDS or dual-link DSI, the driver should try to not expose 2254 * the tiling and virtualize both &drm_crtc and &drm_plane if needed. 2255 * 2256 * This should only be updated by calling 2257 * drm_connector_set_tile_property(). 2258 */ 2259 struct drm_property_blob *tile_blob_ptr; 2260 2261 /** @has_tile: is this connector connected to a tiled monitor */ 2262 bool has_tile; 2263 /** @tile_group: tile group for the connected monitor */ 2264 struct drm_tile_group *tile_group; 2265 /** @tile_is_single_monitor: whether the tile is one monitor housing */ 2266 bool tile_is_single_monitor; 2267 2268 /** @num_h_tile: number of horizontal tiles in the tile group */ 2269 /** @num_v_tile: number of vertical tiles in the tile group */ 2270 uint8_t num_h_tile, num_v_tile; 2271 /** @tile_h_loc: horizontal location of this tile */ 2272 /** @tile_v_loc: vertical location of this tile */ 2273 uint8_t tile_h_loc, tile_v_loc; 2274 /** @tile_h_size: horizontal size of this tile. */ 2275 /** @tile_v_size: vertical size of this tile. */ 2276 uint16_t tile_h_size, tile_v_size; 2277 2278 /** 2279 * @free_node: 2280 * 2281 * List used only by &drm_connector_list_iter to be able to clean up a 2282 * connector from any context, in conjunction with 2283 * &drm_mode_config.connector_free_work. 2284 */ 2285 struct llist_node free_node; 2286 2287 /** @hdr_sink_metadata: HDR Metadata Information read from sink */ 2288 struct hdr_sink_metadata hdr_sink_metadata; 2289 2290 /** 2291 * @hdmi: HDMI-related variable and properties. 2292 */ 2293 struct drm_connector_hdmi hdmi; 2294 2295 /** 2296 * @hdmi_audio: HDMI codec properties and non-DRM state. 2297 */ 2298 struct drm_connector_hdmi_audio hdmi_audio; 2299 2300 /** 2301 * @cec: CEC-related data. 2302 */ 2303 struct drm_connector_cec cec; 2304 }; 2305 2306 #define obj_to_connector(x) container_of(x, struct drm_connector, base) 2307 2308 int drm_connector_init(struct drm_device *dev, 2309 struct drm_connector *connector, 2310 const struct drm_connector_funcs *funcs, 2311 int connector_type); 2312 int drm_connector_dynamic_init(struct drm_device *dev, 2313 struct drm_connector *connector, 2314 const struct drm_connector_funcs *funcs, 2315 int connector_type, 2316 struct i2c_adapter *ddc); 2317 int drm_connector_init_with_ddc(struct drm_device *dev, 2318 struct drm_connector *connector, 2319 const struct drm_connector_funcs *funcs, 2320 int connector_type, 2321 struct i2c_adapter *ddc); 2322 int drmm_connector_init(struct drm_device *dev, 2323 struct drm_connector *connector, 2324 const struct drm_connector_funcs *funcs, 2325 int connector_type, 2326 struct i2c_adapter *ddc); 2327 int drmm_connector_hdmi_init(struct drm_device *dev, 2328 struct drm_connector *connector, 2329 const char *vendor, const char *product, 2330 const struct drm_connector_funcs *funcs, 2331 const struct drm_connector_hdmi_funcs *hdmi_funcs, 2332 int connector_type, 2333 struct i2c_adapter *ddc, 2334 unsigned long supported_formats, 2335 unsigned int max_bpc); 2336 void drm_connector_attach_edid_property(struct drm_connector *connector); 2337 int drm_connector_register(struct drm_connector *connector); 2338 int drm_connector_dynamic_register(struct drm_connector *connector); 2339 void drm_connector_unregister(struct drm_connector *connector); 2340 int drm_connector_attach_encoder(struct drm_connector *connector, 2341 struct drm_encoder *encoder); 2342 2343 void drm_connector_cleanup(struct drm_connector *connector); 2344 2345 static inline unsigned int drm_connector_index(const struct drm_connector *connector) 2346 { 2347 return connector->index; 2348 } 2349 2350 static inline u32 drm_connector_mask(const struct drm_connector *connector) 2351 { 2352 return 1 << connector->index; 2353 } 2354 2355 /** 2356 * drm_connector_lookup - lookup connector object 2357 * @dev: DRM device 2358 * @file_priv: drm file to check for lease against. 2359 * @id: connector object id 2360 * 2361 * This function looks up the connector object specified by id 2362 * add takes a reference to it. 2363 */ 2364 static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev, 2365 struct drm_file *file_priv, 2366 uint32_t id) 2367 { 2368 struct drm_mode_object *mo; 2369 mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CONNECTOR); 2370 return mo ? obj_to_connector(mo) : NULL; 2371 } 2372 2373 /** 2374 * drm_connector_get - acquire a connector reference 2375 * @connector: DRM connector 2376 * 2377 * This function increments the connector's refcount. 2378 */ 2379 static inline void drm_connector_get(struct drm_connector *connector) 2380 { 2381 drm_mode_object_get(&connector->base); 2382 } 2383 2384 /** 2385 * drm_connector_put - release a connector reference 2386 * @connector: DRM connector 2387 * 2388 * This function decrements the connector's reference count and frees the 2389 * object if the reference count drops to zero. 2390 */ 2391 static inline void drm_connector_put(struct drm_connector *connector) 2392 { 2393 drm_mode_object_put(&connector->base); 2394 } 2395 2396 /** 2397 * drm_connector_is_unregistered - has the connector been unregistered from 2398 * userspace? 2399 * @connector: DRM connector 2400 * 2401 * Checks whether or not @connector has been unregistered from userspace. 2402 * 2403 * Returns: 2404 * True if the connector was unregistered, false if the connector is 2405 * registered or has not yet been registered with userspace. 2406 */ 2407 static inline bool 2408 drm_connector_is_unregistered(struct drm_connector *connector) 2409 { 2410 return READ_ONCE(connector->registration_state) == 2411 DRM_CONNECTOR_UNREGISTERED; 2412 } 2413 2414 void drm_connector_oob_hotplug_event(struct fwnode_handle *connector_fwnode, 2415 enum drm_connector_status status); 2416 const char *drm_get_connector_type_name(unsigned int connector_type); 2417 const char *drm_get_connector_status_name(enum drm_connector_status status); 2418 const char *drm_get_subpixel_order_name(enum subpixel_order order); 2419 const char *drm_get_dpms_name(int val); 2420 const char *drm_get_dvi_i_subconnector_name(int val); 2421 const char *drm_get_dvi_i_select_name(int val); 2422 const char *drm_get_tv_mode_name(int val); 2423 const char *drm_get_tv_subconnector_name(int val); 2424 const char *drm_get_tv_select_name(int val); 2425 const char *drm_get_dp_subconnector_name(int val); 2426 const char *drm_get_content_protection_name(int val); 2427 const char *drm_get_hdcp_content_type_name(int val); 2428 2429 int drm_get_tv_mode_from_name(const char *name, size_t len); 2430 2431 int drm_mode_create_dvi_i_properties(struct drm_device *dev); 2432 void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector); 2433 2434 int drm_mode_create_tv_margin_properties(struct drm_device *dev); 2435 int drm_mode_create_tv_properties_legacy(struct drm_device *dev, 2436 unsigned int num_modes, 2437 const char * const modes[]); 2438 int drm_mode_create_tv_properties(struct drm_device *dev, 2439 unsigned int supported_tv_modes); 2440 void drm_connector_attach_tv_margin_properties(struct drm_connector *conn); 2441 int drm_mode_create_scaling_mode_property(struct drm_device *dev); 2442 int drm_connector_attach_content_type_property(struct drm_connector *dev); 2443 int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, 2444 u32 scaling_mode_mask); 2445 int drm_connector_attach_vrr_capable_property( 2446 struct drm_connector *connector); 2447 int drm_connector_attach_broadcast_rgb_property(struct drm_connector *connector); 2448 int drm_connector_attach_colorspace_property(struct drm_connector *connector); 2449 int drm_connector_attach_hdr_output_metadata_property(struct drm_connector *connector); 2450 bool drm_connector_atomic_hdr_metadata_equal(struct drm_connector_state *old_state, 2451 struct drm_connector_state *new_state); 2452 int drm_mode_create_aspect_ratio_property(struct drm_device *dev); 2453 int drm_mode_create_hdmi_colorspace_property(struct drm_connector *connector, 2454 u32 supported_colorspaces); 2455 int drm_mode_create_dp_colorspace_property(struct drm_connector *connector, 2456 u32 supported_colorspaces); 2457 int drm_mode_create_content_type_property(struct drm_device *dev); 2458 int drm_mode_create_suggested_offset_properties(struct drm_device *dev); 2459 2460 int drm_connector_set_path_property(struct drm_connector *connector, 2461 const char *path); 2462 int drm_connector_set_tile_property(struct drm_connector *connector); 2463 int drm_connector_update_edid_property(struct drm_connector *connector, 2464 const struct edid *edid); 2465 void drm_connector_set_link_status_property(struct drm_connector *connector, 2466 uint64_t link_status); 2467 void drm_connector_set_vrr_capable_property( 2468 struct drm_connector *connector, bool capable); 2469 int drm_connector_set_panel_orientation( 2470 struct drm_connector *connector, 2471 enum drm_panel_orientation panel_orientation); 2472 int drm_connector_set_panel_orientation_with_quirk( 2473 struct drm_connector *connector, 2474 enum drm_panel_orientation panel_orientation, 2475 int width, int height); 2476 int drm_connector_set_orientation_from_panel( 2477 struct drm_connector *connector, 2478 struct drm_panel *panel); 2479 int drm_connector_attach_max_bpc_property(struct drm_connector *connector, 2480 int min, int max); 2481 void drm_connector_create_privacy_screen_properties(struct drm_connector *conn); 2482 void drm_connector_attach_privacy_screen_properties(struct drm_connector *conn); 2483 void drm_connector_attach_privacy_screen_provider( 2484 struct drm_connector *connector, struct drm_privacy_screen *priv); 2485 void drm_connector_update_privacy_screen(const struct drm_connector_state *connector_state); 2486 2487 /** 2488 * struct drm_tile_group - Tile group metadata 2489 * @refcount: reference count 2490 * @dev: DRM device 2491 * @id: tile group id exposed to userspace 2492 * @group_data: Sink-private data identifying this group 2493 * 2494 * @group_data corresponds to displayid vend/prod/serial for external screens 2495 * with an EDID. 2496 */ 2497 struct drm_tile_group { 2498 struct kref refcount; 2499 struct drm_device *dev; 2500 int id; 2501 u8 group_data[8]; 2502 }; 2503 2504 struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, 2505 const char topology[8]); 2506 struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev, 2507 const char topology[8]); 2508 void drm_mode_put_tile_group(struct drm_device *dev, 2509 struct drm_tile_group *tg); 2510 2511 /** 2512 * struct drm_connector_list_iter - connector_list iterator 2513 * 2514 * This iterator tracks state needed to be able to walk the connector_list 2515 * within struct drm_mode_config. Only use together with 2516 * drm_connector_list_iter_begin(), drm_connector_list_iter_end() and 2517 * drm_connector_list_iter_next() respectively the convenience macro 2518 * drm_for_each_connector_iter(). 2519 * 2520 * Note that the return value of drm_connector_list_iter_next() is only valid 2521 * up to the next drm_connector_list_iter_next() or 2522 * drm_connector_list_iter_end() call. If you want to use the connector later, 2523 * then you need to grab your own reference first using drm_connector_get(). 2524 */ 2525 struct drm_connector_list_iter { 2526 /* private: */ 2527 struct drm_device *dev; 2528 struct drm_connector *conn; 2529 }; 2530 2531 void drm_connector_list_iter_begin(struct drm_device *dev, 2532 struct drm_connector_list_iter *iter); 2533 struct drm_connector * 2534 drm_connector_list_iter_next(struct drm_connector_list_iter *iter); 2535 void drm_connector_list_iter_end(struct drm_connector_list_iter *iter); 2536 2537 bool drm_connector_has_possible_encoder(struct drm_connector *connector, 2538 struct drm_encoder *encoder); 2539 const char *drm_get_colorspace_name(enum drm_colorspace colorspace); 2540 2541 /** 2542 * drm_for_each_connector_iter - connector_list iterator macro 2543 * @connector: &struct drm_connector pointer used as cursor 2544 * @iter: &struct drm_connector_list_iter 2545 * 2546 * Note that @connector is only valid within the list body, if you want to use 2547 * @connector after calling drm_connector_list_iter_end() then you need to grab 2548 * your own reference first using drm_connector_get(). 2549 */ 2550 #define drm_for_each_connector_iter(connector, iter) \ 2551 while ((connector = drm_connector_list_iter_next(iter))) 2552 2553 /** 2554 * drm_connector_for_each_possible_encoder - iterate connector's possible encoders 2555 * @connector: &struct drm_connector pointer 2556 * @encoder: &struct drm_encoder pointer used as cursor 2557 */ 2558 #define drm_connector_for_each_possible_encoder(connector, encoder) \ 2559 drm_for_each_encoder_mask(encoder, (connector)->dev, \ 2560 (connector)->possible_encoders) 2561 2562 #endif 2563