xref: /linux/include/drm/bridge/mhl.h (revision be709d48329a500621d2a05835283150ae137b45)
1 /*
2  * Defines for Mobile High-Definition Link (MHL) interface
3  *
4  * Copyright (C) 2015, Samsung Electronics, Co., Ltd.
5  * Andrzej Hajda <a.hajda@samsung.com>
6  *
7  * Based on MHL driver for Android devices.
8  * Copyright (C) 2013-2014 Silicon Image, Inc.
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13  */
14 
15 #ifndef __MHL_H__
16 #define __MHL_H__
17 
18 #include <linux/types.h>
19 
20 /* Device Capabilities Registers */
21 enum {
22 	MHL_DCAP_DEV_STATE,
23 	MHL_DCAP_MHL_VERSION,
24 	MHL_DCAP_CAT,
25 	MHL_DCAP_ADOPTER_ID_H,
26 	MHL_DCAP_ADOPTER_ID_L,
27 	MHL_DCAP_VID_LINK_MODE,
28 	MHL_DCAP_AUD_LINK_MODE,
29 	MHL_DCAP_VIDEO_TYPE,
30 	MHL_DCAP_LOG_DEV_MAP,
31 	MHL_DCAP_BANDWIDTH,
32 	MHL_DCAP_FEATURE_FLAG,
33 	MHL_DCAP_DEVICE_ID_H,
34 	MHL_DCAP_DEVICE_ID_L,
35 	MHL_DCAP_SCRATCHPAD_SIZE,
36 	MHL_DCAP_INT_STAT_SIZE,
37 	MHL_DCAP_RESERVED,
38 	MHL_DCAP_SIZE
39 };
40 
41 #define MHL_DCAP_CAT_SINK			0x01
42 #define MHL_DCAP_CAT_SOURCE			0x02
43 #define MHL_DCAP_CAT_POWER			0x10
44 #define MHL_DCAP_CAT_PLIM(x)			((x) << 5)
45 
46 #define MHL_DCAP_VID_LINK_RGB444		0x01
47 #define MHL_DCAP_VID_LINK_YCBCR444		0x02
48 #define MHL_DCAP_VID_LINK_YCBCR422		0x04
49 #define MHL_DCAP_VID_LINK_PPIXEL		0x08
50 #define MHL_DCAP_VID_LINK_ISLANDS		0x10
51 #define MHL_DCAP_VID_LINK_VGA			0x20
52 #define MHL_DCAP_VID_LINK_16BPP			0x40
53 
54 #define MHL_DCAP_AUD_LINK_2CH			0x01
55 #define MHL_DCAP_AUD_LINK_8CH			0x02
56 
57 #define MHL_DCAP_VT_GRAPHICS			0x00
58 #define MHL_DCAP_VT_PHOTO			0x02
59 #define MHL_DCAP_VT_CINEMA			0x04
60 #define MHL_DCAP_VT_GAMES			0x08
61 #define MHL_DCAP_SUPP_VT			0x80
62 
63 #define MHL_DCAP_LD_DISPLAY			0x01
64 #define MHL_DCAP_LD_VIDEO			0x02
65 #define MHL_DCAP_LD_AUDIO			0x04
66 #define MHL_DCAP_LD_MEDIA			0x08
67 #define MHL_DCAP_LD_TUNER			0x10
68 #define MHL_DCAP_LD_RECORD			0x20
69 #define MHL_DCAP_LD_SPEAKER			0x40
70 #define MHL_DCAP_LD_GUI				0x80
71 #define MHL_DCAP_LD_ALL				0xFF
72 
73 #define MHL_DCAP_FEATURE_RCP_SUPPORT		0x01
74 #define MHL_DCAP_FEATURE_RAP_SUPPORT		0x02
75 #define MHL_DCAP_FEATURE_SP_SUPPORT		0x04
76 #define MHL_DCAP_FEATURE_UCP_SEND_SUPPOR	0x08
77 #define MHL_DCAP_FEATURE_UCP_RECV_SUPPORT	0x10
78 #define MHL_DCAP_FEATURE_RBP_SUPPORT		0x40
79 
80 /* Extended Device Capabilities Registers */
81 enum {
82 	MHL_XDC_ECBUS_SPEEDS,
83 	MHL_XDC_TMDS_SPEEDS,
84 	MHL_XDC_ECBUS_ROLES,
85 	MHL_XDC_LOG_DEV_MAPX,
86 	MHL_XDC_SIZE
87 };
88 
89 #define MHL_XDC_ECBUS_S_075			0x01
90 #define MHL_XDC_ECBUS_S_8BIT			0x02
91 #define MHL_XDC_ECBUS_S_12BIT			0x04
92 #define MHL_XDC_ECBUS_D_150			0x10
93 #define MHL_XDC_ECBUS_D_8BIT			0x20
94 
95 #define MHL_XDC_TMDS_000			0x00
96 #define MHL_XDC_TMDS_150			0x01
97 #define MHL_XDC_TMDS_300			0x02
98 #define MHL_XDC_TMDS_600			0x04
99 
100 /* MHL_XDC_ECBUS_ROLES flags */
101 #define MHL_XDC_DEV_HOST			0x01
102 #define MHL_XDC_DEV_DEVICE			0x02
103 #define MHL_XDC_DEV_CHARGER			0x04
104 #define MHL_XDC_HID_HOST			0x08
105 #define MHL_XDC_HID_DEVICE			0x10
106 
107 /* MHL_XDC_LOG_DEV_MAPX flags */
108 #define MHL_XDC_LD_PHONE			0x01
109 
110 /* Device Status Registers */
111 enum {
112 	MHL_DST_CONNECTED_RDY,
113 	MHL_DST_LINK_MODE,
114 	MHL_DST_VERSION,
115 	MHL_DST_SIZE
116 };
117 
118 /* Offset of DEVSTAT registers */
119 #define MHL_DST_OFFSET				0x30
120 #define MHL_DST_REG(name) (MHL_DST_OFFSET + MHL_DST_##name)
121 
122 #define MHL_DST_CONN_DCAP_RDY			0x01
123 #define MHL_DST_CONN_XDEVCAPP_SUPP		0x02
124 #define MHL_DST_CONN_POW_STAT			0x04
125 #define MHL_DST_CONN_PLIM_STAT_MASK		0x38
126 
127 #define MHL_DST_LM_CLK_MODE_MASK		0x07
128 #define MHL_DST_LM_CLK_MODE_PACKED_PIXEL	0x02
129 #define MHL_DST_LM_CLK_MODE_NORMAL		0x03
130 #define MHL_DST_LM_PATH_EN_MASK			0x08
131 #define MHL_DST_LM_PATH_ENABLED			0x08
132 #define MHL_DST_LM_PATH_DISABLED		0x00
133 #define MHL_DST_LM_MUTED_MASK			0x10
134 
135 /* Extended Device Status Registers */
136 enum {
137 	MHL_XDS_CURR_ECBUS_MODE,
138 	MHL_XDS_AVLINK_MODE_STATUS,
139 	MHL_XDS_AVLINK_MODE_CONTROL,
140 	MHL_XDS_MULTI_SINK_STATUS,
141 	MHL_XDS_SIZE
142 };
143 
144 /* Offset of XDEVSTAT registers */
145 #define MHL_XDS_OFFSET				0x90
146 #define MHL_XDS_REG(name) (MHL_XDS_OFFSET + MHL_XDS_##name)
147 
148 /* MHL_XDS_REG_CURR_ECBUS_MODE flags */
149 #define MHL_XDS_SLOT_MODE_8BIT			0x00
150 #define MHL_XDS_SLOT_MODE_6BIT			0x01
151 #define MHL_XDS_ECBUS_S				0x04
152 #define MHL_XDS_ECBUS_D				0x08
153 
154 #define MHL_XDS_LINK_CLOCK_75MHZ		0x00
155 #define MHL_XDS_LINK_CLOCK_150MHZ		0x10
156 #define MHL_XDS_LINK_CLOCK_300MHZ		0x20
157 #define MHL_XDS_LINK_CLOCK_600MHZ		0x30
158 
159 #define MHL_XDS_LINK_STATUS_NO_SIGNAL		0x00
160 #define MHL_XDS_LINK_STATUS_CRU_LOCKED		0x01
161 #define MHL_XDS_LINK_STATUS_TMDS_NORMAL		0x02
162 #define MHL_XDS_LINK_STATUS_TMDS_RESERVED	0x03
163 
164 #define MHL_XDS_LINK_RATE_1_5_GBPS		0x00
165 #define MHL_XDS_LINK_RATE_3_0_GBPS		0x01
166 #define MHL_XDS_LINK_RATE_6_0_GBPS		0x02
167 #define MHL_XDS_ATT_CAPABLE			0x08
168 
169 #define MHL_XDS_SINK_STATUS_1_HPD_LOW		0x00
170 #define MHL_XDS_SINK_STATUS_1_HPD_HIGH		0x01
171 #define MHL_XDS_SINK_STATUS_2_HPD_LOW		0x00
172 #define MHL_XDS_SINK_STATUS_2_HPD_HIGH		0x04
173 #define MHL_XDS_SINK_STATUS_3_HPD_LOW		0x00
174 #define MHL_XDS_SINK_STATUS_3_HPD_HIGH		0x10
175 #define MHL_XDS_SINK_STATUS_4_HPD_LOW		0x00
176 #define MHL_XDS_SINK_STATUS_4_HPD_HIGH		0x40
177 
178 /* Interrupt Registers */
179 enum {
180 	MHL_INT_RCHANGE,
181 	MHL_INT_DCHANGE,
182 	MHL_INT_SIZE
183 };
184 
185 /* Offset of DEVSTAT registers */
186 #define MHL_INT_OFFSET				0x20
187 #define MHL_INT_REG(name) (MHL_INT_OFFSET + MHL_INT_##name)
188 
189 #define	MHL_INT_RC_DCAP_CHG			0x01
190 #define MHL_INT_RC_DSCR_CHG			0x02
191 #define MHL_INT_RC_REQ_WRT			0x04
192 #define MHL_INT_RC_GRT_WRT			0x08
193 #define MHL_INT_RC_3D_REQ			0x10
194 #define MHL_INT_RC_FEAT_REQ			0x20
195 #define MHL_INT_RC_FEAT_COMPLETE		0x40
196 
197 #define MHL_INT_DC_EDID_CHG			0x02
198 
199 enum {
200 	MHL_ACK = 0x33, /* Command or Data byte acknowledge */
201 	MHL_NACK = 0x34, /* Command or Data byte not acknowledge */
202 	MHL_ABORT = 0x35, /* Transaction abort */
203 	MHL_WRITE_STAT = 0xe0, /* Write one status register */
204 	MHL_SET_INT = 0x60, /* Write one interrupt register */
205 	MHL_READ_DEVCAP_REG = 0x61, /* Read one register */
206 	MHL_GET_STATE = 0x62, /* Read CBUS revision level from follower */
207 	MHL_GET_VENDOR_ID = 0x63, /* Read vendor ID value from follower */
208 	MHL_SET_HPD = 0x64, /* Set Hot Plug Detect in follower */
209 	MHL_CLR_HPD = 0x65, /* Clear Hot Plug Detect in follower */
210 	MHL_SET_CAP_ID = 0x66, /* Set Capture ID for downstream device */
211 	MHL_GET_CAP_ID = 0x67, /* Get Capture ID from downstream device */
212 	MHL_MSC_MSG = 0x68, /* VS command to send RCP sub-commands */
213 	MHL_GET_SC1_ERRORCODE = 0x69, /* Get Vendor-Specific error code */
214 	MHL_GET_DDC_ERRORCODE = 0x6A, /* Get DDC channel command error code */
215 	MHL_GET_MSC_ERRORCODE = 0x6B, /* Get MSC command error code */
216 	MHL_WRITE_BURST = 0x6C, /* Write 1-16 bytes to responder's scratchpad */
217 	MHL_GET_SC3_ERRORCODE = 0x6D, /* Get channel 3 command error code */
218 	MHL_WRITE_XSTAT = 0x70, /* Write one extended status register */
219 	MHL_READ_XDEVCAP_REG = 0x71, /* Read one extended devcap register */
220 	/* let the rest of these float, they are software specific */
221 	MHL_READ_EDID_BLOCK,
222 	MHL_SEND_3D_REQ_OR_FEAT_REQ,
223 	MHL_READ_DEVCAP,
224 	MHL_READ_XDEVCAP
225 };
226 
227 /* MSC message types */
228 enum {
229 	MHL_MSC_MSG_RCP = 0x10, /* RCP sub-command */
230 	MHL_MSC_MSG_RCPK = 0x11, /* RCP Acknowledge sub-command */
231 	MHL_MSC_MSG_RCPE = 0x12, /* RCP Error sub-command */
232 	MHL_MSC_MSG_RAP = 0x20, /* Mode Change Warning sub-command */
233 	MHL_MSC_MSG_RAPK = 0x21, /* MCW Acknowledge sub-command */
234 	MHL_MSC_MSG_RBP = 0x22, /* Remote Button Protocol sub-command */
235 	MHL_MSC_MSG_RBPK = 0x23, /* RBP Acknowledge sub-command */
236 	MHL_MSC_MSG_RBPE = 0x24, /* RBP Error sub-command */
237 	MHL_MSC_MSG_UCP = 0x30, /* UCP sub-command */
238 	MHL_MSC_MSG_UCPK = 0x31, /* UCP Acknowledge sub-command */
239 	MHL_MSC_MSG_UCPE = 0x32, /* UCP Error sub-command */
240 	MHL_MSC_MSG_RUSB = 0x40, /* Request USB host role */
241 	MHL_MSC_MSG_RUSBK = 0x41, /* Acknowledge request for USB host role */
242 	MHL_MSC_MSG_RHID = 0x42, /* Request HID host role */
243 	MHL_MSC_MSG_RHIDK = 0x43, /* Acknowledge request for HID host role */
244 	MHL_MSC_MSG_ATT = 0x50, /* Request attention sub-command */
245 	MHL_MSC_MSG_ATTK = 0x51, /* ATT Acknowledge sub-command */
246 	MHL_MSC_MSG_BIST_TRIGGER = 0x60,
247 	MHL_MSC_MSG_BIST_REQUEST_STAT = 0x61,
248 	MHL_MSC_MSG_BIST_READY = 0x62,
249 	MHL_MSC_MSG_BIST_STOP = 0x63,
250 };
251 
252 /* RAP action codes */
253 #define MHL_RAP_POLL		0x00	/* Just do an ack */
254 #define MHL_RAP_CONTENT_ON	0x10	/* Turn content stream ON */
255 #define MHL_RAP_CONTENT_OFF	0x11	/* Turn content stream OFF */
256 #define MHL_RAP_CBUS_MODE_DOWN	0x20
257 #define MHL_RAP_CBUS_MODE_UP	0x21
258 
259 /* RAPK status codes */
260 #define MHL_RAPK_NO_ERR		0x00	/* RAP action recognized & supported */
261 #define MHL_RAPK_UNRECOGNIZED	0x01	/* Unknown RAP action code received */
262 #define MHL_RAPK_UNSUPPORTED	0x02	/* Rcvd RAP action code not supported */
263 #define MHL_RAPK_BUSY		0x03	/* Responder too busy to respond */
264 
265 /* Bit masks for RCP messages */
266 #define MHL_RCP_KEY_RELEASED_MASK	0x80
267 #define MHL_RCP_KEY_ID_MASK		0x7F
268 
269 /*
270  * Error status codes for RCPE messages
271  */
272 /* No error. (Not allowed in RCPE messages) */
273 #define MHL_RCPE_STATUS_NO_ERROR		0x00
274 /* Unsupported/unrecognized key code */
275 #define MHL_RCPE_STATUS_INEFFECTIVE_KEY_CODE	0x01
276 /* Responder busy. Initiator may retry message */
277 #define MHL_RCPE_STATUS_BUSY			0x02
278 
279 /*
280  * Error status codes for RBPE messages
281  */
282 /* No error. (Not allowed in RBPE messages) */
283 #define MHL_RBPE_STATUS_NO_ERROR		0x00
284 /* Unsupported/unrecognized button code */
285 #define MHL_RBPE_STATUS_INEFFECTIVE_BUTTON_CODE	0x01
286 /* Responder busy. Initiator may retry message */
287 #define MHL_RBPE_STATUS_BUSY			0x02
288 
289 /*
290  * Error status codes for UCPE messages
291  */
292 /* No error. (Not allowed in UCPE messages) */
293 #define MHL_UCPE_STATUS_NO_ERROR		0x00
294 /* Unsupported/unrecognized key code */
295 #define MHL_UCPE_STATUS_INEFFECTIVE_KEY_CODE	0x01
296 
297 enum mhl_burst_id {
298 	MHL_BURST_ID_3D_VIC = 0x10,
299 	MHL_BURST_ID_3D_DTD = 0x11,
300 	MHL_BURST_ID_HEV_VIC = 0x20,
301 	MHL_BURST_ID_HEV_DTDA = 0x21,
302 	MHL_BURST_ID_HEV_DTDB = 0x22,
303 	MHL_BURST_ID_VC_ASSIGN = 0x38,
304 	MHL_BURST_ID_VC_CONFIRM = 0x39,
305 	MHL_BURST_ID_AUD_DELAY = 0x40,
306 	MHL_BURST_ID_ADT_BURSTID = 0x41,
307 	MHL_BURST_ID_BIST_SETUP = 0x51,
308 	MHL_BURST_ID_BIST_RETURN_STAT = 0x52,
309 	MHL_BURST_ID_EMSC_SUPPORT = 0x61,
310 	MHL_BURST_ID_HID_PAYLOAD = 0x62,
311 	MHL_BURST_ID_BLK_RCV_BUFFER_INFO = 0x63,
312 	MHL_BURST_ID_BITS_PER_PIXEL_FMT = 0x64,
313 };
314 
315 struct mhl_burst_blk_rcv_buffer_info {
316 	__be16 id;
317 	__le16 size;
318 } __packed;
319 
320 struct mhl3_burst_header {
321 	__be16 id;
322 	u8 checksum;
323 	u8 total_entries;
324 	u8 sequence_index;
325 } __packed;
326 
327 struct mhl_burst_bits_per_pixel_fmt {
328 	struct mhl3_burst_header hdr;
329 	u8 num_entries;
330 	struct {
331 		u8 stream_id;
332 		u8 pixel_format;
333 	} __packed desc[0];
334 } __packed;
335 
336 struct mhl_burst_emsc_support {
337 	struct mhl3_burst_header hdr;
338 	u8 num_entries;
339 	__be16 burst_id[0];
340 } __packed;
341 
342 struct mhl_burst_audio_descr {
343 	struct mhl3_burst_header hdr;
344 	u8 flags;
345 	u8 short_desc[9];
346 } __packed;
347 
348 /*
349  * MHL3 infoframe related definitions
350  */
351 
352 #define MHL3_IEEE_OUI		0x7ca61d
353 #define MHL3_INFOFRAME_SIZE	15
354 
355 enum mhl3_video_format {
356 	MHL3_VIDEO_FORMAT_NONE,
357 	MHL3_VIDEO_FORMAT_3D,
358 	MHL3_VIDEO_FORMAT_MULTI_VIEW,
359 	MHL3_VIDEO_FORMAT_DUAL_3D
360 };
361 
362 enum mhl3_3d_format_type {
363 	MHL3_3D_FORMAT_TYPE_FS, /* frame sequential */
364 	MHL3_3D_FORMAT_TYPE_TB, /* top-bottom */
365 	MHL3_3D_FORMAT_TYPE_LR, /* left-right */
366 	MHL3_3D_FORMAT_TYPE_FS_TB, /* frame sequential, top-bottom */
367 	MHL3_3D_FORMAT_TYPE_FS_LR, /* frame sequential, left-right */
368 	MHL3_3D_FORMAT_TYPE_TB_LR /* top-bottom, left-right */
369 };
370 
371 struct mhl3_infoframe {
372 	unsigned char version;
373 	enum mhl3_video_format video_format;
374 	enum mhl3_3d_format_type format_type;
375 	bool sep_audio;
376 	int hev_format;
377 	int av_delay;
378 };
379 
380 #endif /* __MHL_H__ */
381