1 /****************************************************************************** 2 * 3 * Name: actypes.h - Common data types for the entire ACPI subsystem 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2013, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #ifndef __ACTYPES_H__ 45 #define __ACTYPES_H__ 46 47 /* acpisrc:struct_defs -- for acpisrc conversion */ 48 49 /* 50 * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header 51 * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of 52 * 12/2006. 53 */ 54 #ifndef ACPI_MACHINE_WIDTH 55 #error ACPI_MACHINE_WIDTH not defined 56 #endif 57 58 /*! [Begin] no source code translation */ 59 60 /* 61 * Data type ranges 62 * Note: These macros are designed to be compiler independent as well as 63 * working around problems that some 32-bit compilers have with 64-bit 64 * constants. 65 */ 66 #define ACPI_UINT8_MAX (UINT8) (~((UINT8) 0)) /* 0xFF */ 67 #define ACPI_UINT16_MAX (UINT16)(~((UINT16) 0)) /* 0xFFFF */ 68 #define ACPI_UINT32_MAX (UINT32)(~((UINT32) 0)) /* 0xFFFFFFFF */ 69 #define ACPI_UINT64_MAX (UINT64)(~((UINT64) 0)) /* 0xFFFFFFFFFFFFFFFF */ 70 #define ACPI_ASCII_MAX 0x7F 71 72 /* 73 * Architecture-specific ACPICA Subsystem Data Types 74 * 75 * The goal of these types is to provide source code portability across 76 * 16-bit, 32-bit, and 64-bit targets. 77 * 78 * 1) The following types are of fixed size for all targets (16/32/64): 79 * 80 * BOOLEAN Logical boolean 81 * 82 * UINT8 8-bit (1 byte) unsigned value 83 * UINT16 16-bit (2 byte) unsigned value 84 * UINT32 32-bit (4 byte) unsigned value 85 * UINT64 64-bit (8 byte) unsigned value 86 * 87 * INT16 16-bit (2 byte) signed value 88 * INT32 32-bit (4 byte) signed value 89 * INT64 64-bit (8 byte) signed value 90 * 91 * COMPILER_DEPENDENT_UINT64/INT64 - These types are defined in the 92 * compiler-dependent header(s) and were introduced because there is no common 93 * 64-bit integer type across the various compilation models, as shown in 94 * the table below. 95 * 96 * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit 97 * char 8 8 8 8 8 8 98 * short 16 16 16 16 16 16 99 * _int32 32 100 * int 32 64 32 32 16 16 101 * long 64 64 32 32 32 32 102 * long long 64 64 103 * pointer 64 64 64 32 32 32 104 * 105 * Note: ILP64 and LP32 are currently not supported. 106 * 107 * 108 * 2) These types represent the native word size of the target mode of the 109 * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are 110 * usually used for memory allocation, efficient loop counters, and array 111 * indexes. The types are similar to the size_t type in the C library and are 112 * required because there is no C type that consistently represents the native 113 * data width. ACPI_SIZE is needed because there is no guarantee that a 114 * kernel-level C library is present. 115 * 116 * ACPI_SIZE 16/32/64-bit unsigned value 117 * ACPI_NATIVE_INT 16/32/64-bit signed value 118 */ 119 120 /******************************************************************************* 121 * 122 * Common types for all compilers, all targets 123 * 124 ******************************************************************************/ 125 126 typedef unsigned char BOOLEAN; 127 typedef unsigned char UINT8; 128 typedef unsigned short UINT16; 129 typedef COMPILER_DEPENDENT_UINT64 UINT64; 130 typedef COMPILER_DEPENDENT_INT64 INT64; 131 132 /*! [End] no source code translation !*/ 133 134 /* 135 * Value returned by acpi_os_get_thread_id. There is no standard "thread_id" 136 * across operating systems or even the various UNIX systems. Since ACPICA 137 * only needs the thread ID as a unique thread identifier, we use a u64 138 * as the only common data type - it will accommodate any type of pointer or 139 * any type of integer. It is up to the host-dependent OSL to cast the 140 * native thread ID type to a u64 (in acpi_os_get_thread_id). 141 */ 142 #define acpi_thread_id u64 143 144 /******************************************************************************* 145 * 146 * Types specific to 64-bit targets 147 * 148 ******************************************************************************/ 149 150 #if ACPI_MACHINE_WIDTH == 64 151 152 /*! [Begin] no source code translation (keep the typedefs as-is) */ 153 154 typedef unsigned int UINT32; 155 typedef int INT32; 156 157 /*! [End] no source code translation !*/ 158 159 typedef s64 acpi_native_int; 160 161 typedef u64 acpi_size; 162 typedef u64 acpi_io_address; 163 typedef u64 acpi_physical_address; 164 165 #define ACPI_MAX_PTR ACPI_UINT64_MAX 166 #define ACPI_SIZE_MAX ACPI_UINT64_MAX 167 168 #define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */ 169 170 /* 171 * In the case of the Itanium Processor Family (IPF), the hardware does not 172 * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag 173 * to indicate that special precautions must be taken to avoid alignment faults. 174 * (IA64 or ia64 is currently used by existing compilers to indicate IPF.) 175 * 176 * Note: EM64T and other X86-64 processors support misaligned transfers, 177 * so there is no need to define this flag. 178 */ 179 #if defined (__IA64__) || defined (__ia64__) 180 #define ACPI_MISALIGNMENT_NOT_SUPPORTED 181 #endif 182 183 /******************************************************************************* 184 * 185 * Types specific to 32-bit targets 186 * 187 ******************************************************************************/ 188 189 #elif ACPI_MACHINE_WIDTH == 32 190 191 /*! [Begin] no source code translation (keep the typedefs as-is) */ 192 193 typedef unsigned int UINT32; 194 typedef int INT32; 195 196 /*! [End] no source code translation !*/ 197 198 typedef s32 acpi_native_int; 199 200 typedef u32 acpi_size; 201 typedef u32 acpi_io_address; 202 typedef u32 acpi_physical_address; 203 204 #define ACPI_MAX_PTR ACPI_UINT32_MAX 205 #define ACPI_SIZE_MAX ACPI_UINT32_MAX 206 207 #else 208 209 /* ACPI_MACHINE_WIDTH must be either 64 or 32 */ 210 211 #error unknown ACPI_MACHINE_WIDTH 212 #endif 213 214 /******************************************************************************* 215 * 216 * OS-dependent types 217 * 218 * If the defaults below are not appropriate for the host system, they can 219 * be defined in the OS-specific header, and this will take precedence. 220 * 221 ******************************************************************************/ 222 223 /* Flags for acpi_os_acquire_lock/acpi_os_release_lock */ 224 225 #ifndef acpi_cpu_flags 226 #define acpi_cpu_flags acpi_size 227 #endif 228 229 /* Object returned from acpi_os_create_cache */ 230 231 #ifndef acpi_cache_t 232 #ifdef ACPI_USE_LOCAL_CACHE 233 #define acpi_cache_t struct acpi_memory_list 234 #else 235 #define acpi_cache_t void * 236 #endif 237 #endif 238 239 /* 240 * Synchronization objects - Mutexes, Semaphores, and spin_locks 241 */ 242 #if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE) 243 /* 244 * These macros are used if the host OS does not support a mutex object. 245 * Map the OSL Mutex interfaces to binary semaphores. 246 */ 247 #define acpi_mutex acpi_semaphore 248 #define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle) 249 #define acpi_os_delete_mutex(handle) (void) acpi_os_delete_semaphore (handle) 250 #define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time) 251 #define acpi_os_release_mutex(handle) (void) acpi_os_signal_semaphore (handle, 1) 252 #endif 253 254 /* Configurable types for synchronization objects */ 255 256 #ifndef acpi_spinlock 257 #define acpi_spinlock void * 258 #endif 259 260 #ifndef acpi_semaphore 261 #define acpi_semaphore void * 262 #endif 263 264 #ifndef acpi_mutex 265 #define acpi_mutex void * 266 #endif 267 268 /******************************************************************************* 269 * 270 * Compiler-dependent types 271 * 272 * If the defaults below are not appropriate for the host compiler, they can 273 * be defined in the compiler-specific header, and this will take precedence. 274 * 275 ******************************************************************************/ 276 277 /* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */ 278 279 #ifndef acpi_uintptr_t 280 #define acpi_uintptr_t void * 281 #endif 282 283 /* 284 * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because 285 * some compilers can catch printf format string problems 286 */ 287 #ifndef ACPI_PRINTF_LIKE 288 #define ACPI_PRINTF_LIKE(c) 289 #endif 290 291 /* 292 * Some compilers complain about unused variables. Sometimes we don't want to 293 * use all the variables (for example, _acpi_module_name). This allows us 294 * to tell the compiler in a per-variable manner that a variable 295 * is unused 296 */ 297 #ifndef ACPI_UNUSED_VAR 298 #define ACPI_UNUSED_VAR 299 #endif 300 301 /* 302 * All ACPICA functions that are available to the rest of the kernel are 303 * tagged with this macro which can be defined as appropriate for the host. 304 */ 305 #ifndef ACPI_EXPORT_SYMBOL 306 #define ACPI_EXPORT_SYMBOL(symbol) 307 #endif 308 309 /****************************************************************************** 310 * 311 * ACPI Specification constants (Do not change unless the specification changes) 312 * 313 *****************************************************************************/ 314 315 /* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */ 316 317 #define ACPI_MAX_GPE_BLOCKS 2 318 319 /* Default ACPI register widths */ 320 321 #define ACPI_GPE_REGISTER_WIDTH 8 322 #define ACPI_PM1_REGISTER_WIDTH 16 323 #define ACPI_PM2_REGISTER_WIDTH 8 324 #define ACPI_PM_TIMER_WIDTH 32 325 326 /* Names within the namespace are 4 bytes long */ 327 328 #define ACPI_NAME_SIZE 4 329 #define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ 330 #define ACPI_PATH_SEPARATOR '.' 331 332 /* Sizes for ACPI table headers */ 333 334 #define ACPI_OEM_ID_SIZE 6 335 #define ACPI_OEM_TABLE_ID_SIZE 8 336 337 /* ACPI/PNP hardware IDs */ 338 339 #define PCI_ROOT_HID_STRING "PNP0A03" 340 #define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08" 341 342 /* PM Timer ticks per second (HZ) */ 343 344 #define ACPI_PM_TIMER_FREQUENCY 3579545 345 346 /******************************************************************************* 347 * 348 * Independent types 349 * 350 ******************************************************************************/ 351 352 /* Logical defines and NULL */ 353 354 #ifdef FALSE 355 #undef FALSE 356 #endif 357 #define FALSE (1 == 0) 358 359 #ifdef TRUE 360 #undef TRUE 361 #endif 362 #define TRUE (1 == 1) 363 364 #ifndef NULL 365 #define NULL (void *) 0 366 #endif 367 368 /* 369 * Miscellaneous types 370 */ 371 typedef u32 acpi_status; /* All ACPI Exceptions */ 372 typedef u32 acpi_name; /* 4-byte ACPI name */ 373 typedef char *acpi_string; /* Null terminated ASCII string */ 374 typedef void *acpi_handle; /* Actually a ptr to a NS Node */ 375 376 /* Time constants for timer calculations */ 377 378 #define ACPI_MSEC_PER_SEC 1000L 379 380 #define ACPI_USEC_PER_MSEC 1000L 381 #define ACPI_USEC_PER_SEC 1000000L 382 383 #define ACPI_100NSEC_PER_USEC 10L 384 #define ACPI_100NSEC_PER_MSEC 10000L 385 #define ACPI_100NSEC_PER_SEC 10000000L 386 387 #define ACPI_NSEC_PER_USEC 1000L 388 #define ACPI_NSEC_PER_MSEC 1000000L 389 #define ACPI_NSEC_PER_SEC 1000000000L 390 391 /* Owner IDs are used to track namespace nodes for selective deletion */ 392 393 typedef u8 acpi_owner_id; 394 #define ACPI_OWNER_ID_MAX 0xFF 395 396 #define ACPI_INTEGER_BIT_SIZE 64 397 #define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */ 398 399 #if ACPI_MACHINE_WIDTH == 64 400 #define ACPI_USE_NATIVE_DIVIDE /* Use compiler native 64-bit divide */ 401 #endif 402 403 #define ACPI_MAX64_DECIMAL_DIGITS 20 404 #define ACPI_MAX32_DECIMAL_DIGITS 10 405 #define ACPI_MAX16_DECIMAL_DIGITS 5 406 #define ACPI_MAX8_DECIMAL_DIGITS 3 407 408 /* 409 * Constants with special meanings 410 */ 411 #define ACPI_ROOT_OBJECT ACPI_ADD_PTR (acpi_handle, NULL, ACPI_MAX_PTR) 412 #define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */ 413 #define ACPI_DO_NOT_WAIT 0 414 415 /* 416 * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 32 bits. 417 * In ACPI version 2 (2000) and later, integers are 64 bits. Note that this 418 * pertains to the ACPI integer type only, not to other integers used in the 419 * implementation of the ACPICA subsystem. 420 * 421 * 01/2010: This type is obsolete and has been removed from the entire ACPICA 422 * code base. It remains here for compatibility with device drivers that use 423 * the type. However, it will be removed in the future. 424 */ 425 typedef u64 acpi_integer; 426 #define ACPI_INTEGER_MAX ACPI_UINT64_MAX 427 428 /******************************************************************************* 429 * 430 * Commonly used macros 431 * 432 ******************************************************************************/ 433 434 /* Data manipulation */ 435 436 #define ACPI_LOBYTE(integer) ((u8) (u16)(integer)) 437 #define ACPI_HIBYTE(integer) ((u8) (((u16)(integer)) >> 8)) 438 #define ACPI_LOWORD(integer) ((u16) (u32)(integer)) 439 #define ACPI_HIWORD(integer) ((u16)(((u32)(integer)) >> 16)) 440 #define ACPI_LODWORD(integer64) ((u32) (u64)(integer64)) 441 #define ACPI_HIDWORD(integer64) ((u32)(((u64)(integer64)) >> 32)) 442 443 #define ACPI_SET_BIT(target,bit) ((target) |= (bit)) 444 #define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) 445 #define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) 446 #define ACPI_MAX(a,b) (((a)>(b))?(a):(b)) 447 448 /* Size calculation */ 449 450 #define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0])) 451 452 /* Pointer manipulation */ 453 454 #define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p)) 455 #define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p)) 456 #define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b))) 457 #define ACPI_PTR_DIFF(a, b) (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b))) 458 459 /* Pointer/Integer type conversions */ 460 461 #define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL,(acpi_size) i) 462 #define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) NULL) 463 #define ACPI_OFFSET(d, f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f), (void *) NULL) 464 #define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) 465 #define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) 466 467 /* Optimizations for 4-character (32-bit) acpi_name manipulation */ 468 469 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED 470 #define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b))) 471 #define ACPI_MOVE_NAME(dest,src) (*ACPI_CAST_PTR (u32, (dest)) = *ACPI_CAST_PTR (u32, (src))) 472 #else 473 #define ACPI_COMPARE_NAME(a,b) (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE)) 474 #define ACPI_MOVE_NAME(dest,src) (ACPI_STRNCPY (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAME_SIZE)) 475 #endif 476 477 /******************************************************************************* 478 * 479 * Miscellaneous constants 480 * 481 ******************************************************************************/ 482 483 /* 484 * Initialization sequence 485 */ 486 #define ACPI_FULL_INITIALIZATION 0x00 487 #define ACPI_NO_ADDRESS_SPACE_INIT 0x01 488 #define ACPI_NO_HARDWARE_INIT 0x02 489 #define ACPI_NO_EVENT_INIT 0x04 490 #define ACPI_NO_HANDLER_INIT 0x08 491 #define ACPI_NO_ACPI_ENABLE 0x10 492 #define ACPI_NO_DEVICE_INIT 0x20 493 #define ACPI_NO_OBJECT_INIT 0x40 494 495 /* 496 * Initialization state 497 */ 498 #define ACPI_SUBSYSTEM_INITIALIZE 0x01 499 #define ACPI_INITIALIZED_OK 0x02 500 501 /* 502 * Power state values 503 */ 504 #define ACPI_STATE_UNKNOWN (u8) 0xFF 505 506 #define ACPI_STATE_S0 (u8) 0 507 #define ACPI_STATE_S1 (u8) 1 508 #define ACPI_STATE_S2 (u8) 2 509 #define ACPI_STATE_S3 (u8) 3 510 #define ACPI_STATE_S4 (u8) 4 511 #define ACPI_STATE_S5 (u8) 5 512 #define ACPI_S_STATES_MAX ACPI_STATE_S5 513 #define ACPI_S_STATE_COUNT 6 514 515 #define ACPI_STATE_D0 (u8) 0 516 #define ACPI_STATE_D1 (u8) 1 517 #define ACPI_STATE_D2 (u8) 2 518 #define ACPI_STATE_D3_HOT (u8) 3 519 #define ACPI_STATE_D3 (u8) 4 520 #define ACPI_STATE_D3_COLD ACPI_STATE_D3 521 #define ACPI_D_STATES_MAX ACPI_STATE_D3 522 #define ACPI_D_STATE_COUNT 5 523 524 #define ACPI_STATE_C0 (u8) 0 525 #define ACPI_STATE_C1 (u8) 1 526 #define ACPI_STATE_C2 (u8) 2 527 #define ACPI_STATE_C3 (u8) 3 528 #define ACPI_C_STATES_MAX ACPI_STATE_C3 529 #define ACPI_C_STATE_COUNT 4 530 531 /* 532 * Sleep type invalid value 533 */ 534 #define ACPI_SLEEP_TYPE_MAX 0x7 535 #define ACPI_SLEEP_TYPE_INVALID 0xFF 536 537 /* 538 * Standard notify values 539 */ 540 #define ACPI_NOTIFY_BUS_CHECK (u8) 0x00 541 #define ACPI_NOTIFY_DEVICE_CHECK (u8) 0x01 542 #define ACPI_NOTIFY_DEVICE_WAKE (u8) 0x02 543 #define ACPI_NOTIFY_EJECT_REQUEST (u8) 0x03 544 #define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (u8) 0x04 545 #define ACPI_NOTIFY_FREQUENCY_MISMATCH (u8) 0x05 546 #define ACPI_NOTIFY_BUS_MODE_MISMATCH (u8) 0x06 547 #define ACPI_NOTIFY_POWER_FAULT (u8) 0x07 548 #define ACPI_NOTIFY_CAPABILITIES_CHECK (u8) 0x08 549 #define ACPI_NOTIFY_DEVICE_PLD_CHECK (u8) 0x09 550 #define ACPI_NOTIFY_RESERVED (u8) 0x0A 551 #define ACPI_NOTIFY_LOCALITY_UPDATE (u8) 0x0B 552 #define ACPI_NOTIFY_SHUTDOWN_REQUEST (u8) 0x0C 553 554 #define ACPI_NOTIFY_MAX 0x0C 555 556 /* 557 * Types associated with ACPI names and objects. The first group of 558 * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition 559 * of the ACPI object_type() operator (See the ACPI Spec). Therefore, 560 * only add to the first group if the spec changes. 561 * 562 * NOTE: Types must be kept in sync with the global acpi_ns_properties 563 * and acpi_ns_type_names arrays. 564 */ 565 typedef u32 acpi_object_type; 566 567 #define ACPI_TYPE_ANY 0x00 568 #define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */ 569 #define ACPI_TYPE_STRING 0x02 570 #define ACPI_TYPE_BUFFER 0x03 571 #define ACPI_TYPE_PACKAGE 0x04 /* byte_const, multiple data_term/Constant/super_name */ 572 #define ACPI_TYPE_FIELD_UNIT 0x05 573 #define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */ 574 #define ACPI_TYPE_EVENT 0x07 575 #define ACPI_TYPE_METHOD 0x08 /* Name, byte_const, multiple Code */ 576 #define ACPI_TYPE_MUTEX 0x09 577 #define ACPI_TYPE_REGION 0x0A 578 #define ACPI_TYPE_POWER 0x0B /* Name,byte_const,word_const,multi Node */ 579 #define ACPI_TYPE_PROCESSOR 0x0C /* Name,byte_const,Dword_const,byte_const,multi nm_o */ 580 #define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */ 581 #define ACPI_TYPE_BUFFER_FIELD 0x0E 582 #define ACPI_TYPE_DDB_HANDLE 0x0F 583 #define ACPI_TYPE_DEBUG_OBJECT 0x10 584 585 #define ACPI_TYPE_EXTERNAL_MAX 0x10 586 587 /* 588 * These are object types that do not map directly to the ACPI 589 * object_type() operator. They are used for various internal purposes only. 590 * If new predefined ACPI_TYPEs are added (via the ACPI specification), these 591 * internal types must move upwards. (There is code that depends on these 592 * values being contiguous with the external types above.) 593 */ 594 #define ACPI_TYPE_LOCAL_REGION_FIELD 0x11 595 #define ACPI_TYPE_LOCAL_BANK_FIELD 0x12 596 #define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13 597 #define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, ref_of, Index */ 598 #define ACPI_TYPE_LOCAL_ALIAS 0x15 599 #define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16 600 #define ACPI_TYPE_LOCAL_NOTIFY 0x17 601 #define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18 602 #define ACPI_TYPE_LOCAL_RESOURCE 0x19 603 #define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A 604 #define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple object_list Nodes */ 605 606 #define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */ 607 608 /* 609 * These are special object types that never appear in 610 * a Namespace node, only in an object of union acpi_operand_object 611 */ 612 #define ACPI_TYPE_LOCAL_EXTRA 0x1C 613 #define ACPI_TYPE_LOCAL_DATA 0x1D 614 615 #define ACPI_TYPE_LOCAL_MAX 0x1D 616 617 /* All types above here are invalid */ 618 619 #define ACPI_TYPE_INVALID 0x1E 620 #define ACPI_TYPE_NOT_FOUND 0xFF 621 622 #define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1) 623 624 /* 625 * All I/O 626 */ 627 #define ACPI_READ 0 628 #define ACPI_WRITE 1 629 #define ACPI_IO_MASK 1 630 631 /* 632 * Event Types: Fixed & General Purpose 633 */ 634 typedef u32 acpi_event_type; 635 636 /* 637 * Fixed events 638 */ 639 #define ACPI_EVENT_PMTIMER 0 640 #define ACPI_EVENT_GLOBAL 1 641 #define ACPI_EVENT_POWER_BUTTON 2 642 #define ACPI_EVENT_SLEEP_BUTTON 3 643 #define ACPI_EVENT_RTC 4 644 #define ACPI_EVENT_MAX 4 645 #define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1 646 647 /* 648 * Event status - Per event 649 * ------------- 650 * The encoding of acpi_event_status is illustrated below. 651 * Note that a set bit (1) indicates the property is TRUE 652 * (e.g. if bit 0 is set then the event is enabled). 653 * +-------------+-+-+-+ 654 * | Bits 31:3 |2|1|0| 655 * +-------------+-+-+-+ 656 * | | | | 657 * | | | +- Enabled? 658 * | | +--- Enabled for wake? 659 * | +----- Set? 660 * +----------- <Reserved> 661 */ 662 typedef u32 acpi_event_status; 663 664 #define ACPI_EVENT_FLAG_DISABLED (acpi_event_status) 0x00 665 #define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01 666 #define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02 667 #define ACPI_EVENT_FLAG_SET (acpi_event_status) 0x04 668 #define ACPI_EVENT_FLAG_HANDLE (acpi_event_status) 0x08 669 670 /* 671 * General Purpose Events (GPE) 672 */ 673 #define ACPI_GPE_INVALID 0xFF 674 #define ACPI_GPE_MAX 0xFF 675 #define ACPI_NUM_GPE 256 676 677 /* Actions for acpi_set_gpe, acpi_gpe_wakeup, acpi_hw_low_set_gpe */ 678 679 #define ACPI_GPE_ENABLE 0 680 #define ACPI_GPE_DISABLE 1 681 #define ACPI_GPE_CONDITIONAL_ENABLE 2 682 683 /* 684 * GPE info flags - Per GPE 685 * +-------+-+-+---+ 686 * | 7:4 |3|2|1:0| 687 * +-------+-+-+---+ 688 * | | | | 689 * | | | +-- Type of dispatch:to method, handler, notify, or none 690 * | | +----- Interrupt type: edge or level triggered 691 * | +------- Is a Wake GPE 692 * +------------ <Reserved> 693 */ 694 #define ACPI_GPE_DISPATCH_NONE (u8) 0x00 695 #define ACPI_GPE_DISPATCH_METHOD (u8) 0x01 696 #define ACPI_GPE_DISPATCH_HANDLER (u8) 0x02 697 #define ACPI_GPE_DISPATCH_NOTIFY (u8) 0x03 698 #define ACPI_GPE_DISPATCH_MASK (u8) 0x03 699 700 #define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x04 701 #define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00 702 #define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x04 703 704 #define ACPI_GPE_CAN_WAKE (u8) 0x08 705 706 /* 707 * Flags for GPE and Lock interfaces 708 */ 709 #define ACPI_NOT_ISR 0x1 710 #define ACPI_ISR 0x0 711 712 /* Notify types */ 713 714 #define ACPI_SYSTEM_NOTIFY 0x1 715 #define ACPI_DEVICE_NOTIFY 0x2 716 #define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY) 717 #define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3 718 #define ACPI_NUM_NOTIFY_TYPES 2 719 720 #define ACPI_MAX_SYS_NOTIFY 0x7F 721 #define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF 722 723 #define ACPI_SYSTEM_HANDLER_LIST 0 /* Used as index, must be SYSTEM_NOTIFY -1 */ 724 #define ACPI_DEVICE_HANDLER_LIST 1 /* Used as index, must be DEVICE_NOTIFY -1 */ 725 726 /* Address Space (Operation Region) Types */ 727 728 typedef u8 acpi_adr_space_type; 729 730 #define ACPI_ADR_SPACE_SYSTEM_MEMORY (acpi_adr_space_type) 0 731 #define ACPI_ADR_SPACE_SYSTEM_IO (acpi_adr_space_type) 1 732 #define ACPI_ADR_SPACE_PCI_CONFIG (acpi_adr_space_type) 2 733 #define ACPI_ADR_SPACE_EC (acpi_adr_space_type) 3 734 #define ACPI_ADR_SPACE_SMBUS (acpi_adr_space_type) 4 735 #define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5 736 #define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6 737 #define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7 738 #define ACPI_ADR_SPACE_GPIO (acpi_adr_space_type) 8 739 #define ACPI_ADR_SPACE_GSBUS (acpi_adr_space_type) 9 740 #define ACPI_ADR_SPACE_PLATFORM_COMM (acpi_adr_space_type) 10 741 742 #define ACPI_NUM_PREDEFINED_REGIONS 11 743 744 /* 745 * Special Address Spaces 746 * 747 * Note: A Data Table region is a special type of operation region 748 * that has its own AML opcode. However, internally, the AML 749 * interpreter simply creates an operation region with an an address 750 * space type of ACPI_ADR_SPACE_DATA_TABLE. 751 */ 752 #define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 0x7E /* Internal to ACPICA only */ 753 #define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 0x7F 754 755 /* Values for _REG connection code */ 756 757 #define ACPI_REG_DISCONNECT 0 758 #define ACPI_REG_CONNECT 1 759 760 /* 761 * bit_register IDs 762 * 763 * These values are intended to be used by the hardware interfaces 764 * and are mapped to individual bitfields defined within the ACPI 765 * registers. See the acpi_gbl_bit_register_info global table in utglobal.c 766 * for this mapping. 767 */ 768 769 /* PM1 Status register */ 770 771 #define ACPI_BITREG_TIMER_STATUS 0x00 772 #define ACPI_BITREG_BUS_MASTER_STATUS 0x01 773 #define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02 774 #define ACPI_BITREG_POWER_BUTTON_STATUS 0x03 775 #define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04 776 #define ACPI_BITREG_RT_CLOCK_STATUS 0x05 777 #define ACPI_BITREG_WAKE_STATUS 0x06 778 #define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07 779 780 /* PM1 Enable register */ 781 782 #define ACPI_BITREG_TIMER_ENABLE 0x08 783 #define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09 784 #define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A 785 #define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B 786 #define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C 787 #define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D 788 789 /* PM1 Control register */ 790 791 #define ACPI_BITREG_SCI_ENABLE 0x0E 792 #define ACPI_BITREG_BUS_MASTER_RLD 0x0F 793 #define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10 794 #define ACPI_BITREG_SLEEP_TYPE 0x11 795 #define ACPI_BITREG_SLEEP_ENABLE 0x12 796 797 /* PM2 Control register */ 798 799 #define ACPI_BITREG_ARB_DISABLE 0x13 800 801 #define ACPI_BITREG_MAX 0x13 802 #define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1 803 804 /* Status register values. A 1 clears a status bit. 0 = no effect */ 805 806 #define ACPI_CLEAR_STATUS 1 807 808 /* Enable and Control register values */ 809 810 #define ACPI_ENABLE_EVENT 1 811 #define ACPI_DISABLE_EVENT 0 812 813 /* Sleep function dispatch */ 814 815 typedef acpi_status(*acpi_sleep_function) (u8 sleep_state); 816 817 struct acpi_sleep_functions { 818 acpi_sleep_function legacy_function; 819 acpi_sleep_function extended_function; 820 }; 821 822 /* 823 * External ACPI object definition 824 */ 825 826 /* 827 * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package element 828 * or an unresolved named reference. 829 */ 830 union acpi_object { 831 acpi_object_type type; /* See definition of acpi_ns_type for values */ 832 struct { 833 acpi_object_type type; /* ACPI_TYPE_INTEGER */ 834 u64 value; /* The actual number */ 835 } integer; 836 837 struct { 838 acpi_object_type type; /* ACPI_TYPE_STRING */ 839 u32 length; /* # of bytes in string, excluding trailing null */ 840 char *pointer; /* points to the string value */ 841 } string; 842 843 struct { 844 acpi_object_type type; /* ACPI_TYPE_BUFFER */ 845 u32 length; /* # of bytes in buffer */ 846 u8 *pointer; /* points to the buffer */ 847 } buffer; 848 849 struct { 850 acpi_object_type type; /* ACPI_TYPE_PACKAGE */ 851 u32 count; /* # of elements in package */ 852 union acpi_object *elements; /* Pointer to an array of ACPI_OBJECTs */ 853 } package; 854 855 struct { 856 acpi_object_type type; /* ACPI_TYPE_LOCAL_REFERENCE */ 857 acpi_object_type actual_type; /* Type associated with the Handle */ 858 acpi_handle handle; /* object reference */ 859 } reference; 860 861 struct { 862 acpi_object_type type; /* ACPI_TYPE_PROCESSOR */ 863 u32 proc_id; 864 acpi_io_address pblk_address; 865 u32 pblk_length; 866 } processor; 867 868 struct { 869 acpi_object_type type; /* ACPI_TYPE_POWER */ 870 u32 system_level; 871 u32 resource_order; 872 } power_resource; 873 }; 874 875 /* 876 * List of objects, used as a parameter list for control method evaluation 877 */ 878 struct acpi_object_list { 879 u32 count; 880 union acpi_object *pointer; 881 }; 882 883 /* 884 * Miscellaneous common Data Structures used by the interfaces 885 */ 886 #define ACPI_NO_BUFFER 0 887 #define ACPI_ALLOCATE_BUFFER (acpi_size) (-1) 888 #define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (-2) 889 890 struct acpi_buffer { 891 acpi_size length; /* Length in bytes of the buffer */ 892 void *pointer; /* pointer to buffer */ 893 }; 894 895 /* Free a buffer created in an struct acpi_buffer via ACPI_ALLOCATE_LOCAL_BUFFER */ 896 897 #define ACPI_FREE_BUFFER(b) ACPI_FREE(b.pointer) 898 899 /* 900 * name_type for acpi_get_name 901 */ 902 #define ACPI_FULL_PATHNAME 0 903 #define ACPI_SINGLE_NAME 1 904 #define ACPI_NAME_TYPE_MAX 1 905 906 /* 907 * Predefined Namespace items 908 */ 909 struct acpi_predefined_names { 910 char *name; 911 u8 type; 912 char *val; 913 }; 914 915 /* 916 * Structure and flags for acpi_get_system_info 917 */ 918 #define ACPI_SYS_MODE_UNKNOWN 0x0000 919 #define ACPI_SYS_MODE_ACPI 0x0001 920 #define ACPI_SYS_MODE_LEGACY 0x0002 921 #define ACPI_SYS_MODES_MASK 0x0003 922 923 /* 924 * System info returned by acpi_get_system_info() 925 */ 926 struct acpi_system_info { 927 u32 acpi_ca_version; 928 u32 flags; 929 u32 timer_resolution; 930 u32 reserved1; 931 u32 reserved2; 932 u32 debug_level; 933 u32 debug_layer; 934 }; 935 936 /* Table Event Types */ 937 938 #define ACPI_TABLE_EVENT_LOAD 0x0 939 #define ACPI_TABLE_EVENT_UNLOAD 0x1 940 #define ACPI_NUM_TABLE_EVENTS 2 941 942 /* 943 * Types specific to the OS service interfaces 944 */ 945 typedef u32 946 (ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context); 947 948 typedef void 949 (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context); 950 951 /* 952 * Various handlers and callback procedures 953 */ 954 typedef 955 void (*acpi_gbl_event_handler) (u32 event_type, 956 acpi_handle device, 957 u32 event_number, void *context); 958 959 #define ACPI_EVENT_TYPE_GPE 0 960 #define ACPI_EVENT_TYPE_FIXED 1 961 962 typedef 963 u32(*acpi_event_handler) (void *context); 964 965 typedef 966 u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context); 967 968 typedef 969 void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context); 970 971 typedef 972 void (*acpi_object_handler) (acpi_handle object, void *data); 973 974 typedef acpi_status(*acpi_init_handler) (acpi_handle object, u32 function); 975 976 #define ACPI_INIT_DEVICE_INI 1 977 978 typedef 979 acpi_status(*acpi_exception_handler) (acpi_status aml_status, 980 acpi_name name, 981 u16 opcode, 982 u32 aml_offset, void *context); 983 984 /* Table Event handler (Load, load_table, etc.) and types */ 985 986 typedef 987 acpi_status(*acpi_table_handler) (u32 event, void *table, void *context); 988 989 #define ACPI_TABLE_LOAD 0x0 990 #define ACPI_TABLE_UNLOAD 0x1 991 #define ACPI_NUM_TABLE_EVENTS 2 992 993 /* Address Spaces (For Operation Regions) */ 994 995 typedef 996 acpi_status(*acpi_adr_space_handler) (u32 function, 997 acpi_physical_address address, 998 u32 bit_width, 999 u64 *value, 1000 void *handler_context, 1001 void *region_context); 1002 1003 #define ACPI_DEFAULT_HANDLER NULL 1004 1005 /* Special Context data for generic_serial_bus/general_purpose_io (ACPI 5.0) */ 1006 1007 struct acpi_connection_info { 1008 u8 *connection; 1009 u16 length; 1010 u8 access_length; 1011 }; 1012 1013 typedef 1014 acpi_status(*acpi_adr_space_setup) (acpi_handle region_handle, 1015 u32 function, 1016 void *handler_context, 1017 void **region_context); 1018 1019 #define ACPI_REGION_ACTIVATE 0 1020 #define ACPI_REGION_DEACTIVATE 1 1021 1022 typedef 1023 acpi_status(*acpi_walk_callback) (acpi_handle object, 1024 u32 nesting_level, 1025 void *context, void **return_value); 1026 1027 typedef 1028 u32 (*acpi_interface_handler) (acpi_string interface_name, u32 supported); 1029 1030 /* Interrupt handler return values */ 1031 1032 #define ACPI_INTERRUPT_NOT_HANDLED 0x00 1033 #define ACPI_INTERRUPT_HANDLED 0x01 1034 1035 /* GPE handler return values */ 1036 1037 #define ACPI_REENABLE_GPE 0x80 1038 1039 /* Length of 32-bit EISAID values when converted back to a string */ 1040 1041 #define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */ 1042 1043 /* Length of UUID (string) values */ 1044 1045 #define ACPI_UUID_LENGTH 16 1046 1047 /* Structures used for device/processor HID, UID, CID, and SUB */ 1048 1049 struct acpi_pnp_device_id { 1050 u32 length; /* Length of string + null */ 1051 char *string; 1052 }; 1053 1054 struct acpi_pnp_device_id_list { 1055 u32 count; /* Number of IDs in Ids array */ 1056 u32 list_size; /* Size of list, including ID strings */ 1057 struct acpi_pnp_device_id ids[1]; /* ID array */ 1058 }; 1059 1060 /* 1061 * Structure returned from acpi_get_object_info. 1062 * Optimized for both 32- and 64-bit builds 1063 */ 1064 struct acpi_device_info { 1065 u32 info_size; /* Size of info, including ID strings */ 1066 u32 name; /* ACPI object Name */ 1067 acpi_object_type type; /* ACPI object Type */ 1068 u8 param_count; /* If a method, required parameter count */ 1069 u8 valid; /* Indicates which optional fields are valid */ 1070 u8 flags; /* Miscellaneous info */ 1071 u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */ 1072 u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */ 1073 u32 current_status; /* _STA value */ 1074 u64 address; /* _ADR value */ 1075 struct acpi_pnp_device_id hardware_id; /* _HID value */ 1076 struct acpi_pnp_device_id unique_id; /* _UID value */ 1077 struct acpi_pnp_device_id subsystem_id; /* _SUB value */ 1078 struct acpi_pnp_device_id_list compatible_id_list; /* _CID list <must be last> */ 1079 }; 1080 1081 /* Values for Flags field above (acpi_get_object_info) */ 1082 1083 #define ACPI_PCI_ROOT_BRIDGE 0x01 1084 1085 /* Flags for Valid field above (acpi_get_object_info) */ 1086 1087 #define ACPI_VALID_STA 0x01 1088 #define ACPI_VALID_ADR 0x02 1089 #define ACPI_VALID_HID 0x04 1090 #define ACPI_VALID_UID 0x08 1091 #define ACPI_VALID_SUB 0x10 1092 #define ACPI_VALID_CID 0x20 1093 #define ACPI_VALID_SXDS 0x40 1094 #define ACPI_VALID_SXWS 0x80 1095 1096 /* Flags for _STA return value (current_status above) */ 1097 1098 #define ACPI_STA_DEVICE_PRESENT 0x01 1099 #define ACPI_STA_DEVICE_ENABLED 0x02 1100 #define ACPI_STA_DEVICE_UI 0x04 1101 #define ACPI_STA_DEVICE_FUNCTIONING 0x08 1102 #define ACPI_STA_DEVICE_OK 0x08 /* Synonym */ 1103 #define ACPI_STA_BATTERY_PRESENT 0x10 1104 1105 /* Context structs for address space handlers */ 1106 1107 struct acpi_pci_id { 1108 u16 segment; 1109 u16 bus; 1110 u16 device; 1111 u16 function; 1112 }; 1113 1114 struct acpi_mem_space_context { 1115 u32 length; 1116 acpi_physical_address address; 1117 acpi_physical_address mapped_physical_address; 1118 u8 *mapped_logical_address; 1119 acpi_size mapped_length; 1120 }; 1121 1122 /* 1123 * struct acpi_memory_list is used only if the ACPICA local cache is enabled 1124 */ 1125 struct acpi_memory_list { 1126 char *list_name; 1127 void *list_head; 1128 u16 object_size; 1129 u16 max_depth; 1130 u16 current_depth; 1131 u16 link_offset; 1132 1133 #ifdef ACPI_DBG_TRACK_ALLOCATIONS 1134 1135 /* Statistics for debug memory tracking only */ 1136 1137 u32 total_allocated; 1138 u32 total_freed; 1139 u32 max_occupied; 1140 u32 total_size; 1141 u32 current_total_size; 1142 u32 requests; 1143 u32 hits; 1144 #endif 1145 }; 1146 1147 #endif /* __ACTYPES_H__ */ 1148