xref: /linux/fs/sync.c (revision 87c9c16317882dd6dbbc07e349bc3223e14f3244)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * High-level sync()-related operations
4  */
5 
6 #include <linux/kernel.h>
7 #include <linux/file.h>
8 #include <linux/fs.h>
9 #include <linux/slab.h>
10 #include <linux/export.h>
11 #include <linux/namei.h>
12 #include <linux/sched.h>
13 #include <linux/writeback.h>
14 #include <linux/syscalls.h>
15 #include <linux/linkage.h>
16 #include <linux/pagemap.h>
17 #include <linux/quotaops.h>
18 #include <linux/backing-dev.h>
19 #include "internal.h"
20 
21 #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
22 			SYNC_FILE_RANGE_WAIT_AFTER)
23 
24 /*
25  * Do the filesystem syncing work. For simple filesystems
26  * writeback_inodes_sb(sb) just dirties buffers with inodes so we have to
27  * submit IO for these buffers via __sync_blockdev(). This also speeds up the
28  * wait == 1 case since in that case write_inode() functions do
29  * sync_dirty_buffer() and thus effectively write one block at a time.
30  */
31 static int __sync_filesystem(struct super_block *sb, int wait)
32 {
33 	if (wait)
34 		sync_inodes_sb(sb);
35 	else
36 		writeback_inodes_sb(sb, WB_REASON_SYNC);
37 
38 	if (sb->s_op->sync_fs)
39 		sb->s_op->sync_fs(sb, wait);
40 	return __sync_blockdev(sb->s_bdev, wait);
41 }
42 
43 /*
44  * Write out and wait upon all dirty data associated with this
45  * superblock.  Filesystem data as well as the underlying block
46  * device.  Takes the superblock lock.
47  */
48 int sync_filesystem(struct super_block *sb)
49 {
50 	int ret;
51 
52 	/*
53 	 * We need to be protected against the filesystem going from
54 	 * r/o to r/w or vice versa.
55 	 */
56 	WARN_ON(!rwsem_is_locked(&sb->s_umount));
57 
58 	/*
59 	 * No point in syncing out anything if the filesystem is read-only.
60 	 */
61 	if (sb_rdonly(sb))
62 		return 0;
63 
64 	ret = __sync_filesystem(sb, 0);
65 	if (ret < 0)
66 		return ret;
67 	return __sync_filesystem(sb, 1);
68 }
69 EXPORT_SYMBOL(sync_filesystem);
70 
71 static void sync_inodes_one_sb(struct super_block *sb, void *arg)
72 {
73 	if (!sb_rdonly(sb))
74 		sync_inodes_sb(sb);
75 }
76 
77 static void sync_fs_one_sb(struct super_block *sb, void *arg)
78 {
79 	if (!sb_rdonly(sb) && !(sb->s_iflags & SB_I_SKIP_SYNC) &&
80 	    sb->s_op->sync_fs)
81 		sb->s_op->sync_fs(sb, *(int *)arg);
82 }
83 
84 static void fdatawrite_one_bdev(struct block_device *bdev, void *arg)
85 {
86 	filemap_fdatawrite(bdev->bd_inode->i_mapping);
87 }
88 
89 static void fdatawait_one_bdev(struct block_device *bdev, void *arg)
90 {
91 	/*
92 	 * We keep the error status of individual mapping so that
93 	 * applications can catch the writeback error using fsync(2).
94 	 * See filemap_fdatawait_keep_errors() for details.
95 	 */
96 	filemap_fdatawait_keep_errors(bdev->bd_inode->i_mapping);
97 }
98 
99 /*
100  * Sync everything. We start by waking flusher threads so that most of
101  * writeback runs on all devices in parallel. Then we sync all inodes reliably
102  * which effectively also waits for all flusher threads to finish doing
103  * writeback. At this point all data is on disk so metadata should be stable
104  * and we tell filesystems to sync their metadata via ->sync_fs() calls.
105  * Finally, we writeout all block devices because some filesystems (e.g. ext2)
106  * just write metadata (such as inodes or bitmaps) to block device page cache
107  * and do not sync it on their own in ->sync_fs().
108  */
109 void ksys_sync(void)
110 {
111 	int nowait = 0, wait = 1;
112 
113 	wakeup_flusher_threads(WB_REASON_SYNC);
114 	iterate_supers(sync_inodes_one_sb, NULL);
115 	iterate_supers(sync_fs_one_sb, &nowait);
116 	iterate_supers(sync_fs_one_sb, &wait);
117 	iterate_bdevs(fdatawrite_one_bdev, NULL);
118 	iterate_bdevs(fdatawait_one_bdev, NULL);
119 	if (unlikely(laptop_mode))
120 		laptop_sync_completion();
121 }
122 
123 SYSCALL_DEFINE0(sync)
124 {
125 	ksys_sync();
126 	return 0;
127 }
128 
129 static void do_sync_work(struct work_struct *work)
130 {
131 	int nowait = 0;
132 
133 	/*
134 	 * Sync twice to reduce the possibility we skipped some inodes / pages
135 	 * because they were temporarily locked
136 	 */
137 	iterate_supers(sync_inodes_one_sb, &nowait);
138 	iterate_supers(sync_fs_one_sb, &nowait);
139 	iterate_bdevs(fdatawrite_one_bdev, NULL);
140 	iterate_supers(sync_inodes_one_sb, &nowait);
141 	iterate_supers(sync_fs_one_sb, &nowait);
142 	iterate_bdevs(fdatawrite_one_bdev, NULL);
143 	printk("Emergency Sync complete\n");
144 	kfree(work);
145 }
146 
147 void emergency_sync(void)
148 {
149 	struct work_struct *work;
150 
151 	work = kmalloc(sizeof(*work), GFP_ATOMIC);
152 	if (work) {
153 		INIT_WORK(work, do_sync_work);
154 		schedule_work(work);
155 	}
156 }
157 
158 /*
159  * sync a single super
160  */
161 SYSCALL_DEFINE1(syncfs, int, fd)
162 {
163 	struct fd f = fdget(fd);
164 	struct super_block *sb;
165 	int ret, ret2;
166 
167 	if (!f.file)
168 		return -EBADF;
169 	sb = f.file->f_path.dentry->d_sb;
170 
171 	down_read(&sb->s_umount);
172 	ret = sync_filesystem(sb);
173 	up_read(&sb->s_umount);
174 
175 	ret2 = errseq_check_and_advance(&sb->s_wb_err, &f.file->f_sb_err);
176 
177 	fdput(f);
178 	return ret ? ret : ret2;
179 }
180 
181 /**
182  * vfs_fsync_range - helper to sync a range of data & metadata to disk
183  * @file:		file to sync
184  * @start:		offset in bytes of the beginning of data range to sync
185  * @end:		offset in bytes of the end of data range (inclusive)
186  * @datasync:		perform only datasync
187  *
188  * Write back data in range @start..@end and metadata for @file to disk.  If
189  * @datasync is set only metadata needed to access modified file data is
190  * written.
191  */
192 int vfs_fsync_range(struct file *file, loff_t start, loff_t end, int datasync)
193 {
194 	struct inode *inode = file->f_mapping->host;
195 
196 	if (!file->f_op->fsync)
197 		return -EINVAL;
198 	if (!datasync && (inode->i_state & I_DIRTY_TIME))
199 		mark_inode_dirty_sync(inode);
200 	return file->f_op->fsync(file, start, end, datasync);
201 }
202 EXPORT_SYMBOL(vfs_fsync_range);
203 
204 /**
205  * vfs_fsync - perform a fsync or fdatasync on a file
206  * @file:		file to sync
207  * @datasync:		only perform a fdatasync operation
208  *
209  * Write back data and metadata for @file to disk.  If @datasync is
210  * set only metadata needed to access modified file data is written.
211  */
212 int vfs_fsync(struct file *file, int datasync)
213 {
214 	return vfs_fsync_range(file, 0, LLONG_MAX, datasync);
215 }
216 EXPORT_SYMBOL(vfs_fsync);
217 
218 static int do_fsync(unsigned int fd, int datasync)
219 {
220 	struct fd f = fdget(fd);
221 	int ret = -EBADF;
222 
223 	if (f.file) {
224 		ret = vfs_fsync(f.file, datasync);
225 		fdput(f);
226 	}
227 	return ret;
228 }
229 
230 SYSCALL_DEFINE1(fsync, unsigned int, fd)
231 {
232 	return do_fsync(fd, 0);
233 }
234 
235 SYSCALL_DEFINE1(fdatasync, unsigned int, fd)
236 {
237 	return do_fsync(fd, 1);
238 }
239 
240 int sync_file_range(struct file *file, loff_t offset, loff_t nbytes,
241 		    unsigned int flags)
242 {
243 	int ret;
244 	struct address_space *mapping;
245 	loff_t endbyte;			/* inclusive */
246 	umode_t i_mode;
247 
248 	ret = -EINVAL;
249 	if (flags & ~VALID_FLAGS)
250 		goto out;
251 
252 	endbyte = offset + nbytes;
253 
254 	if ((s64)offset < 0)
255 		goto out;
256 	if ((s64)endbyte < 0)
257 		goto out;
258 	if (endbyte < offset)
259 		goto out;
260 
261 	if (sizeof(pgoff_t) == 4) {
262 		if (offset >= (0x100000000ULL << PAGE_SHIFT)) {
263 			/*
264 			 * The range starts outside a 32 bit machine's
265 			 * pagecache addressing capabilities.  Let it "succeed"
266 			 */
267 			ret = 0;
268 			goto out;
269 		}
270 		if (endbyte >= (0x100000000ULL << PAGE_SHIFT)) {
271 			/*
272 			 * Out to EOF
273 			 */
274 			nbytes = 0;
275 		}
276 	}
277 
278 	if (nbytes == 0)
279 		endbyte = LLONG_MAX;
280 	else
281 		endbyte--;		/* inclusive */
282 
283 	i_mode = file_inode(file)->i_mode;
284 	ret = -ESPIPE;
285 	if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) &&
286 			!S_ISLNK(i_mode))
287 		goto out;
288 
289 	mapping = file->f_mapping;
290 	ret = 0;
291 	if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) {
292 		ret = file_fdatawait_range(file, offset, endbyte);
293 		if (ret < 0)
294 			goto out;
295 	}
296 
297 	if (flags & SYNC_FILE_RANGE_WRITE) {
298 		int sync_mode = WB_SYNC_NONE;
299 
300 		if ((flags & SYNC_FILE_RANGE_WRITE_AND_WAIT) ==
301 			     SYNC_FILE_RANGE_WRITE_AND_WAIT)
302 			sync_mode = WB_SYNC_ALL;
303 
304 		ret = __filemap_fdatawrite_range(mapping, offset, endbyte,
305 						 sync_mode);
306 		if (ret < 0)
307 			goto out;
308 	}
309 
310 	if (flags & SYNC_FILE_RANGE_WAIT_AFTER)
311 		ret = file_fdatawait_range(file, offset, endbyte);
312 
313 out:
314 	return ret;
315 }
316 
317 /*
318  * ksys_sync_file_range() permits finely controlled syncing over a segment of
319  * a file in the range offset .. (offset+nbytes-1) inclusive.  If nbytes is
320  * zero then ksys_sync_file_range() will operate from offset out to EOF.
321  *
322  * The flag bits are:
323  *
324  * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
325  * before performing the write.
326  *
327  * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
328  * range which are not presently under writeback. Note that this may block for
329  * significant periods due to exhaustion of disk request structures.
330  *
331  * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
332  * after performing the write.
333  *
334  * Useful combinations of the flag bits are:
335  *
336  * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
337  * in the range which were dirty on entry to ksys_sync_file_range() are placed
338  * under writeout.  This is a start-write-for-data-integrity operation.
339  *
340  * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
341  * are not presently under writeout.  This is an asynchronous flush-to-disk
342  * operation.  Not suitable for data integrity operations.
343  *
344  * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
345  * completion of writeout of all pages in the range.  This will be used after an
346  * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
347  * for that operation to complete and to return the result.
348  *
349  * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER
350  * (a.k.a. SYNC_FILE_RANGE_WRITE_AND_WAIT):
351  * a traditional sync() operation.  This is a write-for-data-integrity operation
352  * which will ensure that all pages in the range which were dirty on entry to
353  * ksys_sync_file_range() are written to disk.  It should be noted that disk
354  * caches are not flushed by this call, so there are no guarantees here that the
355  * data will be available on disk after a crash.
356  *
357  *
358  * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
359  * I/O errors or ENOSPC conditions and will return those to the caller, after
360  * clearing the EIO and ENOSPC flags in the address_space.
361  *
362  * It should be noted that none of these operations write out the file's
363  * metadata.  So unless the application is strictly performing overwrites of
364  * already-instantiated disk blocks, there are no guarantees here that the data
365  * will be available after a crash.
366  */
367 int ksys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
368 			 unsigned int flags)
369 {
370 	int ret;
371 	struct fd f;
372 
373 	ret = -EBADF;
374 	f = fdget(fd);
375 	if (f.file)
376 		ret = sync_file_range(f.file, offset, nbytes, flags);
377 
378 	fdput(f);
379 	return ret;
380 }
381 
382 SYSCALL_DEFINE4(sync_file_range, int, fd, loff_t, offset, loff_t, nbytes,
383 				unsigned int, flags)
384 {
385 	return ksys_sync_file_range(fd, offset, nbytes, flags);
386 }
387 
388 /* It would be nice if people remember that not all the world's an i386
389    when they introduce new system calls */
390 SYSCALL_DEFINE4(sync_file_range2, int, fd, unsigned int, flags,
391 				 loff_t, offset, loff_t, nbytes)
392 {
393 	return ksys_sync_file_range(fd, offset, nbytes, flags);
394 }
395