xref: /linux/fs/sync.c (revision 26b0d14106954ae46d2f4f7eec3481828a210f7d)
1 /*
2  * High-level sync()-related operations
3  */
4 
5 #include <linux/kernel.h>
6 #include <linux/file.h>
7 #include <linux/fs.h>
8 #include <linux/slab.h>
9 #include <linux/export.h>
10 #include <linux/namei.h>
11 #include <linux/sched.h>
12 #include <linux/writeback.h>
13 #include <linux/syscalls.h>
14 #include <linux/linkage.h>
15 #include <linux/pagemap.h>
16 #include <linux/quotaops.h>
17 #include <linux/backing-dev.h>
18 #include "internal.h"
19 
20 #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
21 			SYNC_FILE_RANGE_WAIT_AFTER)
22 
23 /*
24  * Do the filesystem syncing work. For simple filesystems
25  * writeback_inodes_sb(sb) just dirties buffers with inodes so we have to
26  * submit IO for these buffers via __sync_blockdev(). This also speeds up the
27  * wait == 1 case since in that case write_inode() functions do
28  * sync_dirty_buffer() and thus effectively write one block at a time.
29  */
30 static int __sync_filesystem(struct super_block *sb, int wait)
31 {
32 	/*
33 	 * This should be safe, as we require bdi backing to actually
34 	 * write out data in the first place
35 	 */
36 	if (sb->s_bdi == &noop_backing_dev_info)
37 		return 0;
38 
39 	if (sb->s_qcop && sb->s_qcop->quota_sync)
40 		sb->s_qcop->quota_sync(sb, -1, wait);
41 
42 	if (wait)
43 		sync_inodes_sb(sb);
44 	else
45 		writeback_inodes_sb(sb, WB_REASON_SYNC);
46 
47 	if (sb->s_op->sync_fs)
48 		sb->s_op->sync_fs(sb, wait);
49 	return __sync_blockdev(sb->s_bdev, wait);
50 }
51 
52 /*
53  * Write out and wait upon all dirty data associated with this
54  * superblock.  Filesystem data as well as the underlying block
55  * device.  Takes the superblock lock.
56  */
57 int sync_filesystem(struct super_block *sb)
58 {
59 	int ret;
60 
61 	/*
62 	 * We need to be protected against the filesystem going from
63 	 * r/o to r/w or vice versa.
64 	 */
65 	WARN_ON(!rwsem_is_locked(&sb->s_umount));
66 
67 	/*
68 	 * No point in syncing out anything if the filesystem is read-only.
69 	 */
70 	if (sb->s_flags & MS_RDONLY)
71 		return 0;
72 
73 	ret = __sync_filesystem(sb, 0);
74 	if (ret < 0)
75 		return ret;
76 	return __sync_filesystem(sb, 1);
77 }
78 EXPORT_SYMBOL_GPL(sync_filesystem);
79 
80 static void sync_one_sb(struct super_block *sb, void *arg)
81 {
82 	if (!(sb->s_flags & MS_RDONLY))
83 		__sync_filesystem(sb, *(int *)arg);
84 }
85 /*
86  * Sync all the data for all the filesystems (called by sys_sync() and
87  * emergency sync)
88  */
89 static void sync_filesystems(int wait)
90 {
91 	iterate_supers(sync_one_sb, &wait);
92 }
93 
94 /*
95  * sync everything.  Start out by waking pdflush, because that writes back
96  * all queues in parallel.
97  */
98 SYSCALL_DEFINE0(sync)
99 {
100 	wakeup_flusher_threads(0, WB_REASON_SYNC);
101 	sync_filesystems(0);
102 	sync_filesystems(1);
103 	if (unlikely(laptop_mode))
104 		laptop_sync_completion();
105 	return 0;
106 }
107 
108 static void do_sync_work(struct work_struct *work)
109 {
110 	/*
111 	 * Sync twice to reduce the possibility we skipped some inodes / pages
112 	 * because they were temporarily locked
113 	 */
114 	sync_filesystems(0);
115 	sync_filesystems(0);
116 	printk("Emergency Sync complete\n");
117 	kfree(work);
118 }
119 
120 void emergency_sync(void)
121 {
122 	struct work_struct *work;
123 
124 	work = kmalloc(sizeof(*work), GFP_ATOMIC);
125 	if (work) {
126 		INIT_WORK(work, do_sync_work);
127 		schedule_work(work);
128 	}
129 }
130 
131 /*
132  * sync a single super
133  */
134 SYSCALL_DEFINE1(syncfs, int, fd)
135 {
136 	struct file *file;
137 	struct super_block *sb;
138 	int ret;
139 	int fput_needed;
140 
141 	file = fget_light(fd, &fput_needed);
142 	if (!file)
143 		return -EBADF;
144 	sb = file->f_dentry->d_sb;
145 
146 	down_read(&sb->s_umount);
147 	ret = sync_filesystem(sb);
148 	up_read(&sb->s_umount);
149 
150 	fput_light(file, fput_needed);
151 	return ret;
152 }
153 
154 /**
155  * vfs_fsync_range - helper to sync a range of data & metadata to disk
156  * @file:		file to sync
157  * @start:		offset in bytes of the beginning of data range to sync
158  * @end:		offset in bytes of the end of data range (inclusive)
159  * @datasync:		perform only datasync
160  *
161  * Write back data in range @start..@end and metadata for @file to disk.  If
162  * @datasync is set only metadata needed to access modified file data is
163  * written.
164  */
165 int vfs_fsync_range(struct file *file, loff_t start, loff_t end, int datasync)
166 {
167 	if (!file->f_op || !file->f_op->fsync)
168 		return -EINVAL;
169 	return file->f_op->fsync(file, start, end, datasync);
170 }
171 EXPORT_SYMBOL(vfs_fsync_range);
172 
173 /**
174  * vfs_fsync - perform a fsync or fdatasync on a file
175  * @file:		file to sync
176  * @datasync:		only perform a fdatasync operation
177  *
178  * Write back data and metadata for @file to disk.  If @datasync is
179  * set only metadata needed to access modified file data is written.
180  */
181 int vfs_fsync(struct file *file, int datasync)
182 {
183 	return vfs_fsync_range(file, 0, LLONG_MAX, datasync);
184 }
185 EXPORT_SYMBOL(vfs_fsync);
186 
187 static int do_fsync(unsigned int fd, int datasync)
188 {
189 	struct file *file;
190 	int ret = -EBADF;
191 	int fput_needed;
192 
193 	file = fget_light(fd, &fput_needed);
194 	if (file) {
195 		ret = vfs_fsync(file, datasync);
196 		fput_light(file, fput_needed);
197 	}
198 	return ret;
199 }
200 
201 SYSCALL_DEFINE1(fsync, unsigned int, fd)
202 {
203 	return do_fsync(fd, 0);
204 }
205 
206 SYSCALL_DEFINE1(fdatasync, unsigned int, fd)
207 {
208 	return do_fsync(fd, 1);
209 }
210 
211 /**
212  * generic_write_sync - perform syncing after a write if file / inode is sync
213  * @file:	file to which the write happened
214  * @pos:	offset where the write started
215  * @count:	length of the write
216  *
217  * This is just a simple wrapper about our general syncing function.
218  */
219 int generic_write_sync(struct file *file, loff_t pos, loff_t count)
220 {
221 	if (!(file->f_flags & O_DSYNC) && !IS_SYNC(file->f_mapping->host))
222 		return 0;
223 	return vfs_fsync_range(file, pos, pos + count - 1,
224 			       (file->f_flags & __O_SYNC) ? 0 : 1);
225 }
226 EXPORT_SYMBOL(generic_write_sync);
227 
228 /*
229  * sys_sync_file_range() permits finely controlled syncing over a segment of
230  * a file in the range offset .. (offset+nbytes-1) inclusive.  If nbytes is
231  * zero then sys_sync_file_range() will operate from offset out to EOF.
232  *
233  * The flag bits are:
234  *
235  * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
236  * before performing the write.
237  *
238  * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
239  * range which are not presently under writeback. Note that this may block for
240  * significant periods due to exhaustion of disk request structures.
241  *
242  * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
243  * after performing the write.
244  *
245  * Useful combinations of the flag bits are:
246  *
247  * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
248  * in the range which were dirty on entry to sys_sync_file_range() are placed
249  * under writeout.  This is a start-write-for-data-integrity operation.
250  *
251  * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
252  * are not presently under writeout.  This is an asynchronous flush-to-disk
253  * operation.  Not suitable for data integrity operations.
254  *
255  * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
256  * completion of writeout of all pages in the range.  This will be used after an
257  * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
258  * for that operation to complete and to return the result.
259  *
260  * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER:
261  * a traditional sync() operation.  This is a write-for-data-integrity operation
262  * which will ensure that all pages in the range which were dirty on entry to
263  * sys_sync_file_range() are committed to disk.
264  *
265  *
266  * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
267  * I/O errors or ENOSPC conditions and will return those to the caller, after
268  * clearing the EIO and ENOSPC flags in the address_space.
269  *
270  * It should be noted that none of these operations write out the file's
271  * metadata.  So unless the application is strictly performing overwrites of
272  * already-instantiated disk blocks, there are no guarantees here that the data
273  * will be available after a crash.
274  */
275 SYSCALL_DEFINE(sync_file_range)(int fd, loff_t offset, loff_t nbytes,
276 				unsigned int flags)
277 {
278 	int ret;
279 	struct file *file;
280 	struct address_space *mapping;
281 	loff_t endbyte;			/* inclusive */
282 	int fput_needed;
283 	umode_t i_mode;
284 
285 	ret = -EINVAL;
286 	if (flags & ~VALID_FLAGS)
287 		goto out;
288 
289 	endbyte = offset + nbytes;
290 
291 	if ((s64)offset < 0)
292 		goto out;
293 	if ((s64)endbyte < 0)
294 		goto out;
295 	if (endbyte < offset)
296 		goto out;
297 
298 	if (sizeof(pgoff_t) == 4) {
299 		if (offset >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
300 			/*
301 			 * The range starts outside a 32 bit machine's
302 			 * pagecache addressing capabilities.  Let it "succeed"
303 			 */
304 			ret = 0;
305 			goto out;
306 		}
307 		if (endbyte >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
308 			/*
309 			 * Out to EOF
310 			 */
311 			nbytes = 0;
312 		}
313 	}
314 
315 	if (nbytes == 0)
316 		endbyte = LLONG_MAX;
317 	else
318 		endbyte--;		/* inclusive */
319 
320 	ret = -EBADF;
321 	file = fget_light(fd, &fput_needed);
322 	if (!file)
323 		goto out;
324 
325 	i_mode = file->f_path.dentry->d_inode->i_mode;
326 	ret = -ESPIPE;
327 	if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) &&
328 			!S_ISLNK(i_mode))
329 		goto out_put;
330 
331 	mapping = file->f_mapping;
332 	if (!mapping) {
333 		ret = -EINVAL;
334 		goto out_put;
335 	}
336 
337 	ret = 0;
338 	if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) {
339 		ret = filemap_fdatawait_range(mapping, offset, endbyte);
340 		if (ret < 0)
341 			goto out_put;
342 	}
343 
344 	if (flags & SYNC_FILE_RANGE_WRITE) {
345 		ret = filemap_fdatawrite_range(mapping, offset, endbyte);
346 		if (ret < 0)
347 			goto out_put;
348 	}
349 
350 	if (flags & SYNC_FILE_RANGE_WAIT_AFTER)
351 		ret = filemap_fdatawait_range(mapping, offset, endbyte);
352 
353 out_put:
354 	fput_light(file, fput_needed);
355 out:
356 	return ret;
357 }
358 #ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
359 asmlinkage long SyS_sync_file_range(long fd, loff_t offset, loff_t nbytes,
360 				    long flags)
361 {
362 	return SYSC_sync_file_range((int) fd, offset, nbytes,
363 				    (unsigned int) flags);
364 }
365 SYSCALL_ALIAS(sys_sync_file_range, SyS_sync_file_range);
366 #endif
367 
368 /* It would be nice if people remember that not all the world's an i386
369    when they introduce new system calls */
370 SYSCALL_DEFINE(sync_file_range2)(int fd, unsigned int flags,
371 				 loff_t offset, loff_t nbytes)
372 {
373 	return sys_sync_file_range(fd, offset, nbytes, flags);
374 }
375 #ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
376 asmlinkage long SyS_sync_file_range2(long fd, long flags,
377 				     loff_t offset, loff_t nbytes)
378 {
379 	return SYSC_sync_file_range2((int) fd, (unsigned int) flags,
380 				     offset, nbytes);
381 }
382 SYSCALL_ALIAS(sys_sync_file_range2, SyS_sync_file_range2);
383 #endif
384