1 /* -*- mode: c; c-basic-offset: 8; -*- 2 * vim: noexpandtab sw=8 ts=8 sts=0: 3 * 4 * file.c 5 * 6 * File open, close, extend, truncate 7 * 8 * Copyright (C) 2002, 2004 Oracle. All rights reserved. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public 12 * License as published by the Free Software Foundation; either 13 * version 2 of the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 18 * General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public 21 * License along with this program; if not, write to the 22 * Free Software Foundation, Inc., 59 Temple Place - Suite 330, 23 * Boston, MA 021110-1307, USA. 24 */ 25 26 #include <linux/capability.h> 27 #include <linux/fs.h> 28 #include <linux/types.h> 29 #include <linux/slab.h> 30 #include <linux/highmem.h> 31 #include <linux/pagemap.h> 32 #include <linux/uio.h> 33 #include <linux/sched.h> 34 #include <linux/splice.h> 35 #include <linux/mount.h> 36 #include <linux/writeback.h> 37 #include <linux/falloc.h> 38 #include <linux/quotaops.h> 39 #include <linux/blkdev.h> 40 41 #define MLOG_MASK_PREFIX ML_INODE 42 #include <cluster/masklog.h> 43 44 #include "ocfs2.h" 45 46 #include "alloc.h" 47 #include "aops.h" 48 #include "dir.h" 49 #include "dlmglue.h" 50 #include "extent_map.h" 51 #include "file.h" 52 #include "sysfile.h" 53 #include "inode.h" 54 #include "ioctl.h" 55 #include "journal.h" 56 #include "locks.h" 57 #include "mmap.h" 58 #include "suballoc.h" 59 #include "super.h" 60 #include "xattr.h" 61 #include "acl.h" 62 #include "quota.h" 63 #include "refcounttree.h" 64 65 #include "buffer_head_io.h" 66 67 static int ocfs2_init_file_private(struct inode *inode, struct file *file) 68 { 69 struct ocfs2_file_private *fp; 70 71 fp = kzalloc(sizeof(struct ocfs2_file_private), GFP_KERNEL); 72 if (!fp) 73 return -ENOMEM; 74 75 fp->fp_file = file; 76 mutex_init(&fp->fp_mutex); 77 ocfs2_file_lock_res_init(&fp->fp_flock, fp); 78 file->private_data = fp; 79 80 return 0; 81 } 82 83 static void ocfs2_free_file_private(struct inode *inode, struct file *file) 84 { 85 struct ocfs2_file_private *fp = file->private_data; 86 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 87 88 if (fp) { 89 ocfs2_simple_drop_lockres(osb, &fp->fp_flock); 90 ocfs2_lock_res_free(&fp->fp_flock); 91 kfree(fp); 92 file->private_data = NULL; 93 } 94 } 95 96 static int ocfs2_file_open(struct inode *inode, struct file *file) 97 { 98 int status; 99 int mode = file->f_flags; 100 struct ocfs2_inode_info *oi = OCFS2_I(inode); 101 102 mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file, 103 file->f_path.dentry->d_name.len, file->f_path.dentry->d_name.name); 104 105 if (file->f_mode & FMODE_WRITE) 106 dquot_initialize(inode); 107 108 spin_lock(&oi->ip_lock); 109 110 /* Check that the inode hasn't been wiped from disk by another 111 * node. If it hasn't then we're safe as long as we hold the 112 * spin lock until our increment of open count. */ 113 if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_DELETED) { 114 spin_unlock(&oi->ip_lock); 115 116 status = -ENOENT; 117 goto leave; 118 } 119 120 if (mode & O_DIRECT) 121 oi->ip_flags |= OCFS2_INODE_OPEN_DIRECT; 122 123 oi->ip_open_count++; 124 spin_unlock(&oi->ip_lock); 125 126 status = ocfs2_init_file_private(inode, file); 127 if (status) { 128 /* 129 * We want to set open count back if we're failing the 130 * open. 131 */ 132 spin_lock(&oi->ip_lock); 133 oi->ip_open_count--; 134 spin_unlock(&oi->ip_lock); 135 } 136 137 leave: 138 mlog_exit(status); 139 return status; 140 } 141 142 static int ocfs2_file_release(struct inode *inode, struct file *file) 143 { 144 struct ocfs2_inode_info *oi = OCFS2_I(inode); 145 146 mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file, 147 file->f_path.dentry->d_name.len, 148 file->f_path.dentry->d_name.name); 149 150 spin_lock(&oi->ip_lock); 151 if (!--oi->ip_open_count) 152 oi->ip_flags &= ~OCFS2_INODE_OPEN_DIRECT; 153 spin_unlock(&oi->ip_lock); 154 155 ocfs2_free_file_private(inode, file); 156 157 mlog_exit(0); 158 159 return 0; 160 } 161 162 static int ocfs2_dir_open(struct inode *inode, struct file *file) 163 { 164 return ocfs2_init_file_private(inode, file); 165 } 166 167 static int ocfs2_dir_release(struct inode *inode, struct file *file) 168 { 169 ocfs2_free_file_private(inode, file); 170 return 0; 171 } 172 173 static int ocfs2_sync_file(struct file *file, int datasync) 174 { 175 int err = 0; 176 journal_t *journal; 177 struct inode *inode = file->f_mapping->host; 178 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 179 180 mlog_entry("(0x%p, %d, 0x%p, '%.*s')\n", file, datasync, 181 file->f_path.dentry, file->f_path.dentry->d_name.len, 182 file->f_path.dentry->d_name.name); 183 184 if (datasync && !(inode->i_state & I_DIRTY_DATASYNC)) { 185 /* 186 * We still have to flush drive's caches to get data to the 187 * platter 188 */ 189 if (osb->s_mount_opt & OCFS2_MOUNT_BARRIER) 190 blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL); 191 goto bail; 192 } 193 194 journal = osb->journal->j_journal; 195 err = jbd2_journal_force_commit(journal); 196 197 bail: 198 mlog_exit(err); 199 200 return (err < 0) ? -EIO : 0; 201 } 202 203 int ocfs2_should_update_atime(struct inode *inode, 204 struct vfsmount *vfsmnt) 205 { 206 struct timespec now; 207 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 208 209 if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb)) 210 return 0; 211 212 if ((inode->i_flags & S_NOATIME) || 213 ((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode))) 214 return 0; 215 216 /* 217 * We can be called with no vfsmnt structure - NFSD will 218 * sometimes do this. 219 * 220 * Note that our action here is different than touch_atime() - 221 * if we can't tell whether this is a noatime mount, then we 222 * don't know whether to trust the value of s_atime_quantum. 223 */ 224 if (vfsmnt == NULL) 225 return 0; 226 227 if ((vfsmnt->mnt_flags & MNT_NOATIME) || 228 ((vfsmnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode))) 229 return 0; 230 231 if (vfsmnt->mnt_flags & MNT_RELATIME) { 232 if ((timespec_compare(&inode->i_atime, &inode->i_mtime) <= 0) || 233 (timespec_compare(&inode->i_atime, &inode->i_ctime) <= 0)) 234 return 1; 235 236 return 0; 237 } 238 239 now = CURRENT_TIME; 240 if ((now.tv_sec - inode->i_atime.tv_sec <= osb->s_atime_quantum)) 241 return 0; 242 else 243 return 1; 244 } 245 246 int ocfs2_update_inode_atime(struct inode *inode, 247 struct buffer_head *bh) 248 { 249 int ret; 250 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 251 handle_t *handle; 252 struct ocfs2_dinode *di = (struct ocfs2_dinode *) bh->b_data; 253 254 mlog_entry_void(); 255 256 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); 257 if (IS_ERR(handle)) { 258 ret = PTR_ERR(handle); 259 mlog_errno(ret); 260 goto out; 261 } 262 263 ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), bh, 264 OCFS2_JOURNAL_ACCESS_WRITE); 265 if (ret) { 266 mlog_errno(ret); 267 goto out_commit; 268 } 269 270 /* 271 * Don't use ocfs2_mark_inode_dirty() here as we don't always 272 * have i_mutex to guard against concurrent changes to other 273 * inode fields. 274 */ 275 inode->i_atime = CURRENT_TIME; 276 di->i_atime = cpu_to_le64(inode->i_atime.tv_sec); 277 di->i_atime_nsec = cpu_to_le32(inode->i_atime.tv_nsec); 278 ocfs2_journal_dirty(handle, bh); 279 280 out_commit: 281 ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle); 282 out: 283 mlog_exit(ret); 284 return ret; 285 } 286 287 static int ocfs2_set_inode_size(handle_t *handle, 288 struct inode *inode, 289 struct buffer_head *fe_bh, 290 u64 new_i_size) 291 { 292 int status; 293 294 mlog_entry_void(); 295 i_size_write(inode, new_i_size); 296 inode->i_blocks = ocfs2_inode_sector_count(inode); 297 inode->i_ctime = inode->i_mtime = CURRENT_TIME; 298 299 status = ocfs2_mark_inode_dirty(handle, inode, fe_bh); 300 if (status < 0) { 301 mlog_errno(status); 302 goto bail; 303 } 304 305 bail: 306 mlog_exit(status); 307 return status; 308 } 309 310 int ocfs2_simple_size_update(struct inode *inode, 311 struct buffer_head *di_bh, 312 u64 new_i_size) 313 { 314 int ret; 315 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 316 handle_t *handle = NULL; 317 318 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); 319 if (IS_ERR(handle)) { 320 ret = PTR_ERR(handle); 321 mlog_errno(ret); 322 goto out; 323 } 324 325 ret = ocfs2_set_inode_size(handle, inode, di_bh, 326 new_i_size); 327 if (ret < 0) 328 mlog_errno(ret); 329 330 ocfs2_commit_trans(osb, handle); 331 out: 332 return ret; 333 } 334 335 static int ocfs2_cow_file_pos(struct inode *inode, 336 struct buffer_head *fe_bh, 337 u64 offset) 338 { 339 int status; 340 u32 phys, cpos = offset >> OCFS2_SB(inode->i_sb)->s_clustersize_bits; 341 unsigned int num_clusters = 0; 342 unsigned int ext_flags = 0; 343 344 /* 345 * If the new offset is aligned to the range of the cluster, there is 346 * no space for ocfs2_zero_range_for_truncate to fill, so no need to 347 * CoW either. 348 */ 349 if ((offset & (OCFS2_SB(inode->i_sb)->s_clustersize - 1)) == 0) 350 return 0; 351 352 status = ocfs2_get_clusters(inode, cpos, &phys, 353 &num_clusters, &ext_flags); 354 if (status) { 355 mlog_errno(status); 356 goto out; 357 } 358 359 if (!(ext_flags & OCFS2_EXT_REFCOUNTED)) 360 goto out; 361 362 return ocfs2_refcount_cow(inode, NULL, fe_bh, cpos, 1, cpos+1); 363 364 out: 365 return status; 366 } 367 368 static int ocfs2_orphan_for_truncate(struct ocfs2_super *osb, 369 struct inode *inode, 370 struct buffer_head *fe_bh, 371 u64 new_i_size) 372 { 373 int status; 374 handle_t *handle; 375 struct ocfs2_dinode *di; 376 u64 cluster_bytes; 377 378 mlog_entry_void(); 379 380 /* 381 * We need to CoW the cluster contains the offset if it is reflinked 382 * since we will call ocfs2_zero_range_for_truncate later which will 383 * write "0" from offset to the end of the cluster. 384 */ 385 status = ocfs2_cow_file_pos(inode, fe_bh, new_i_size); 386 if (status) { 387 mlog_errno(status); 388 return status; 389 } 390 391 /* TODO: This needs to actually orphan the inode in this 392 * transaction. */ 393 394 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); 395 if (IS_ERR(handle)) { 396 status = PTR_ERR(handle); 397 mlog_errno(status); 398 goto out; 399 } 400 401 status = ocfs2_journal_access_di(handle, INODE_CACHE(inode), fe_bh, 402 OCFS2_JOURNAL_ACCESS_WRITE); 403 if (status < 0) { 404 mlog_errno(status); 405 goto out_commit; 406 } 407 408 /* 409 * Do this before setting i_size. 410 */ 411 cluster_bytes = ocfs2_align_bytes_to_clusters(inode->i_sb, new_i_size); 412 status = ocfs2_zero_range_for_truncate(inode, handle, new_i_size, 413 cluster_bytes); 414 if (status) { 415 mlog_errno(status); 416 goto out_commit; 417 } 418 419 i_size_write(inode, new_i_size); 420 inode->i_ctime = inode->i_mtime = CURRENT_TIME; 421 422 di = (struct ocfs2_dinode *) fe_bh->b_data; 423 di->i_size = cpu_to_le64(new_i_size); 424 di->i_ctime = di->i_mtime = cpu_to_le64(inode->i_ctime.tv_sec); 425 di->i_ctime_nsec = di->i_mtime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec); 426 427 ocfs2_journal_dirty(handle, fe_bh); 428 429 out_commit: 430 ocfs2_commit_trans(osb, handle); 431 out: 432 433 mlog_exit(status); 434 return status; 435 } 436 437 static int ocfs2_truncate_file(struct inode *inode, 438 struct buffer_head *di_bh, 439 u64 new_i_size) 440 { 441 int status = 0; 442 struct ocfs2_dinode *fe = NULL; 443 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 444 445 mlog_entry("(inode = %llu, new_i_size = %llu\n", 446 (unsigned long long)OCFS2_I(inode)->ip_blkno, 447 (unsigned long long)new_i_size); 448 449 /* We trust di_bh because it comes from ocfs2_inode_lock(), which 450 * already validated it */ 451 fe = (struct ocfs2_dinode *) di_bh->b_data; 452 453 mlog_bug_on_msg(le64_to_cpu(fe->i_size) != i_size_read(inode), 454 "Inode %llu, inode i_size = %lld != di " 455 "i_size = %llu, i_flags = 0x%x\n", 456 (unsigned long long)OCFS2_I(inode)->ip_blkno, 457 i_size_read(inode), 458 (unsigned long long)le64_to_cpu(fe->i_size), 459 le32_to_cpu(fe->i_flags)); 460 461 if (new_i_size > le64_to_cpu(fe->i_size)) { 462 mlog(0, "asked to truncate file with size (%llu) to size (%llu)!\n", 463 (unsigned long long)le64_to_cpu(fe->i_size), 464 (unsigned long long)new_i_size); 465 status = -EINVAL; 466 mlog_errno(status); 467 goto bail; 468 } 469 470 mlog(0, "inode %llu, i_size = %llu, new_i_size = %llu\n", 471 (unsigned long long)le64_to_cpu(fe->i_blkno), 472 (unsigned long long)le64_to_cpu(fe->i_size), 473 (unsigned long long)new_i_size); 474 475 /* lets handle the simple truncate cases before doing any more 476 * cluster locking. */ 477 if (new_i_size == le64_to_cpu(fe->i_size)) 478 goto bail; 479 480 down_write(&OCFS2_I(inode)->ip_alloc_sem); 481 482 ocfs2_resv_discard(&osb->osb_la_resmap, 483 &OCFS2_I(inode)->ip_la_data_resv); 484 485 /* 486 * The inode lock forced other nodes to sync and drop their 487 * pages, which (correctly) happens even if we have a truncate 488 * without allocation change - ocfs2 cluster sizes can be much 489 * greater than page size, so we have to truncate them 490 * anyway. 491 */ 492 unmap_mapping_range(inode->i_mapping, new_i_size + PAGE_SIZE - 1, 0, 1); 493 truncate_inode_pages(inode->i_mapping, new_i_size); 494 495 if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { 496 status = ocfs2_truncate_inline(inode, di_bh, new_i_size, 497 i_size_read(inode), 1); 498 if (status) 499 mlog_errno(status); 500 501 goto bail_unlock_sem; 502 } 503 504 /* alright, we're going to need to do a full blown alloc size 505 * change. Orphan the inode so that recovery can complete the 506 * truncate if necessary. This does the task of marking 507 * i_size. */ 508 status = ocfs2_orphan_for_truncate(osb, inode, di_bh, new_i_size); 509 if (status < 0) { 510 mlog_errno(status); 511 goto bail_unlock_sem; 512 } 513 514 status = ocfs2_commit_truncate(osb, inode, di_bh); 515 if (status < 0) { 516 mlog_errno(status); 517 goto bail_unlock_sem; 518 } 519 520 /* TODO: orphan dir cleanup here. */ 521 bail_unlock_sem: 522 up_write(&OCFS2_I(inode)->ip_alloc_sem); 523 524 bail: 525 if (!status && OCFS2_I(inode)->ip_clusters == 0) 526 status = ocfs2_try_remove_refcount_tree(inode, di_bh); 527 528 mlog_exit(status); 529 return status; 530 } 531 532 /* 533 * extend file allocation only here. 534 * we'll update all the disk stuff, and oip->alloc_size 535 * 536 * expect stuff to be locked, a transaction started and enough data / 537 * metadata reservations in the contexts. 538 * 539 * Will return -EAGAIN, and a reason if a restart is needed. 540 * If passed in, *reason will always be set, even in error. 541 */ 542 int ocfs2_add_inode_data(struct ocfs2_super *osb, 543 struct inode *inode, 544 u32 *logical_offset, 545 u32 clusters_to_add, 546 int mark_unwritten, 547 struct buffer_head *fe_bh, 548 handle_t *handle, 549 struct ocfs2_alloc_context *data_ac, 550 struct ocfs2_alloc_context *meta_ac, 551 enum ocfs2_alloc_restarted *reason_ret) 552 { 553 int ret; 554 struct ocfs2_extent_tree et; 555 556 ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), fe_bh); 557 ret = ocfs2_add_clusters_in_btree(handle, &et, logical_offset, 558 clusters_to_add, mark_unwritten, 559 data_ac, meta_ac, reason_ret); 560 561 return ret; 562 } 563 564 static int __ocfs2_extend_allocation(struct inode *inode, u32 logical_start, 565 u32 clusters_to_add, int mark_unwritten) 566 { 567 int status = 0; 568 int restart_func = 0; 569 int credits; 570 u32 prev_clusters; 571 struct buffer_head *bh = NULL; 572 struct ocfs2_dinode *fe = NULL; 573 handle_t *handle = NULL; 574 struct ocfs2_alloc_context *data_ac = NULL; 575 struct ocfs2_alloc_context *meta_ac = NULL; 576 enum ocfs2_alloc_restarted why; 577 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 578 struct ocfs2_extent_tree et; 579 int did_quota = 0; 580 581 mlog_entry("(clusters_to_add = %u)\n", clusters_to_add); 582 583 /* 584 * This function only exists for file systems which don't 585 * support holes. 586 */ 587 BUG_ON(mark_unwritten && !ocfs2_sparse_alloc(osb)); 588 589 status = ocfs2_read_inode_block(inode, &bh); 590 if (status < 0) { 591 mlog_errno(status); 592 goto leave; 593 } 594 fe = (struct ocfs2_dinode *) bh->b_data; 595 596 restart_all: 597 BUG_ON(le32_to_cpu(fe->i_clusters) != OCFS2_I(inode)->ip_clusters); 598 599 mlog(0, "extend inode %llu, i_size = %lld, di->i_clusters = %u, " 600 "clusters_to_add = %u\n", 601 (unsigned long long)OCFS2_I(inode)->ip_blkno, 602 (long long)i_size_read(inode), le32_to_cpu(fe->i_clusters), 603 clusters_to_add); 604 ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), bh); 605 status = ocfs2_lock_allocators(inode, &et, clusters_to_add, 0, 606 &data_ac, &meta_ac); 607 if (status) { 608 mlog_errno(status); 609 goto leave; 610 } 611 612 credits = ocfs2_calc_extend_credits(osb->sb, &fe->id2.i_list, 613 clusters_to_add); 614 handle = ocfs2_start_trans(osb, credits); 615 if (IS_ERR(handle)) { 616 status = PTR_ERR(handle); 617 handle = NULL; 618 mlog_errno(status); 619 goto leave; 620 } 621 622 restarted_transaction: 623 status = dquot_alloc_space_nodirty(inode, 624 ocfs2_clusters_to_bytes(osb->sb, clusters_to_add)); 625 if (status) 626 goto leave; 627 did_quota = 1; 628 629 /* reserve a write to the file entry early on - that we if we 630 * run out of credits in the allocation path, we can still 631 * update i_size. */ 632 status = ocfs2_journal_access_di(handle, INODE_CACHE(inode), bh, 633 OCFS2_JOURNAL_ACCESS_WRITE); 634 if (status < 0) { 635 mlog_errno(status); 636 goto leave; 637 } 638 639 prev_clusters = OCFS2_I(inode)->ip_clusters; 640 641 status = ocfs2_add_inode_data(osb, 642 inode, 643 &logical_start, 644 clusters_to_add, 645 mark_unwritten, 646 bh, 647 handle, 648 data_ac, 649 meta_ac, 650 &why); 651 if ((status < 0) && (status != -EAGAIN)) { 652 if (status != -ENOSPC) 653 mlog_errno(status); 654 goto leave; 655 } 656 657 ocfs2_journal_dirty(handle, bh); 658 659 spin_lock(&OCFS2_I(inode)->ip_lock); 660 clusters_to_add -= (OCFS2_I(inode)->ip_clusters - prev_clusters); 661 spin_unlock(&OCFS2_I(inode)->ip_lock); 662 /* Release unused quota reservation */ 663 dquot_free_space(inode, 664 ocfs2_clusters_to_bytes(osb->sb, clusters_to_add)); 665 did_quota = 0; 666 667 if (why != RESTART_NONE && clusters_to_add) { 668 if (why == RESTART_META) { 669 mlog(0, "restarting function.\n"); 670 restart_func = 1; 671 status = 0; 672 } else { 673 BUG_ON(why != RESTART_TRANS); 674 675 mlog(0, "restarting transaction.\n"); 676 /* TODO: This can be more intelligent. */ 677 credits = ocfs2_calc_extend_credits(osb->sb, 678 &fe->id2.i_list, 679 clusters_to_add); 680 status = ocfs2_extend_trans(handle, credits); 681 if (status < 0) { 682 /* handle still has to be committed at 683 * this point. */ 684 status = -ENOMEM; 685 mlog_errno(status); 686 goto leave; 687 } 688 goto restarted_transaction; 689 } 690 } 691 692 mlog(0, "fe: i_clusters = %u, i_size=%llu\n", 693 le32_to_cpu(fe->i_clusters), 694 (unsigned long long)le64_to_cpu(fe->i_size)); 695 mlog(0, "inode: ip_clusters=%u, i_size=%lld\n", 696 OCFS2_I(inode)->ip_clusters, (long long)i_size_read(inode)); 697 698 leave: 699 if (status < 0 && did_quota) 700 dquot_free_space(inode, 701 ocfs2_clusters_to_bytes(osb->sb, clusters_to_add)); 702 if (handle) { 703 ocfs2_commit_trans(osb, handle); 704 handle = NULL; 705 } 706 if (data_ac) { 707 ocfs2_free_alloc_context(data_ac); 708 data_ac = NULL; 709 } 710 if (meta_ac) { 711 ocfs2_free_alloc_context(meta_ac); 712 meta_ac = NULL; 713 } 714 if ((!status) && restart_func) { 715 restart_func = 0; 716 goto restart_all; 717 } 718 brelse(bh); 719 bh = NULL; 720 721 mlog_exit(status); 722 return status; 723 } 724 725 /* 726 * While a write will already be ordering the data, a truncate will not. 727 * Thus, we need to explicitly order the zeroed pages. 728 */ 729 static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode) 730 { 731 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 732 handle_t *handle = NULL; 733 int ret = 0; 734 735 if (!ocfs2_should_order_data(inode)) 736 goto out; 737 738 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); 739 if (IS_ERR(handle)) { 740 ret = -ENOMEM; 741 mlog_errno(ret); 742 goto out; 743 } 744 745 ret = ocfs2_jbd2_file_inode(handle, inode); 746 if (ret < 0) 747 mlog_errno(ret); 748 749 out: 750 if (ret) { 751 if (!IS_ERR(handle)) 752 ocfs2_commit_trans(osb, handle); 753 handle = ERR_PTR(ret); 754 } 755 return handle; 756 } 757 758 /* Some parts of this taken from generic_cont_expand, which turned out 759 * to be too fragile to do exactly what we need without us having to 760 * worry about recursive locking in ->write_begin() and ->write_end(). */ 761 static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from, 762 u64 abs_to) 763 { 764 struct address_space *mapping = inode->i_mapping; 765 struct page *page; 766 unsigned long index = abs_from >> PAGE_CACHE_SHIFT; 767 handle_t *handle = NULL; 768 int ret = 0; 769 unsigned zero_from, zero_to, block_start, block_end; 770 771 BUG_ON(abs_from >= abs_to); 772 BUG_ON(abs_to > (((u64)index + 1) << PAGE_CACHE_SHIFT)); 773 BUG_ON(abs_from & (inode->i_blkbits - 1)); 774 775 page = find_or_create_page(mapping, index, GFP_NOFS); 776 if (!page) { 777 ret = -ENOMEM; 778 mlog_errno(ret); 779 goto out; 780 } 781 782 /* Get the offsets within the page that we want to zero */ 783 zero_from = abs_from & (PAGE_CACHE_SIZE - 1); 784 zero_to = abs_to & (PAGE_CACHE_SIZE - 1); 785 if (!zero_to) 786 zero_to = PAGE_CACHE_SIZE; 787 788 mlog(0, 789 "abs_from = %llu, abs_to = %llu, index = %lu, zero_from = %u, zero_to = %u\n", 790 (unsigned long long)abs_from, (unsigned long long)abs_to, 791 index, zero_from, zero_to); 792 793 /* We know that zero_from is block aligned */ 794 for (block_start = zero_from; block_start < zero_to; 795 block_start = block_end) { 796 block_end = block_start + (1 << inode->i_blkbits); 797 798 /* 799 * block_start is block-aligned. Bump it by one to force 800 * __block_write_begin and block_commit_write to zero the 801 * whole block. 802 */ 803 ret = __block_write_begin(page, block_start + 1, 0, 804 ocfs2_get_block); 805 if (ret < 0) { 806 mlog_errno(ret); 807 goto out_unlock; 808 } 809 810 if (!handle) { 811 handle = ocfs2_zero_start_ordered_transaction(inode); 812 if (IS_ERR(handle)) { 813 ret = PTR_ERR(handle); 814 handle = NULL; 815 break; 816 } 817 } 818 819 /* must not update i_size! */ 820 ret = block_commit_write(page, block_start + 1, 821 block_start + 1); 822 if (ret < 0) 823 mlog_errno(ret); 824 else 825 ret = 0; 826 } 827 828 if (handle) 829 ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle); 830 831 out_unlock: 832 unlock_page(page); 833 page_cache_release(page); 834 out: 835 return ret; 836 } 837 838 /* 839 * Find the next range to zero. We do this in terms of bytes because 840 * that's what ocfs2_zero_extend() wants, and it is dealing with the 841 * pagecache. We may return multiple extents. 842 * 843 * zero_start and zero_end are ocfs2_zero_extend()s current idea of what 844 * needs to be zeroed. range_start and range_end return the next zeroing 845 * range. A subsequent call should pass the previous range_end as its 846 * zero_start. If range_end is 0, there's nothing to do. 847 * 848 * Unwritten extents are skipped over. Refcounted extents are CoWd. 849 */ 850 static int ocfs2_zero_extend_get_range(struct inode *inode, 851 struct buffer_head *di_bh, 852 u64 zero_start, u64 zero_end, 853 u64 *range_start, u64 *range_end) 854 { 855 int rc = 0, needs_cow = 0; 856 u32 p_cpos, zero_clusters = 0; 857 u32 zero_cpos = 858 zero_start >> OCFS2_SB(inode->i_sb)->s_clustersize_bits; 859 u32 last_cpos = ocfs2_clusters_for_bytes(inode->i_sb, zero_end); 860 unsigned int num_clusters = 0; 861 unsigned int ext_flags = 0; 862 863 while (zero_cpos < last_cpos) { 864 rc = ocfs2_get_clusters(inode, zero_cpos, &p_cpos, 865 &num_clusters, &ext_flags); 866 if (rc) { 867 mlog_errno(rc); 868 goto out; 869 } 870 871 if (p_cpos && !(ext_flags & OCFS2_EXT_UNWRITTEN)) { 872 zero_clusters = num_clusters; 873 if (ext_flags & OCFS2_EXT_REFCOUNTED) 874 needs_cow = 1; 875 break; 876 } 877 878 zero_cpos += num_clusters; 879 } 880 if (!zero_clusters) { 881 *range_end = 0; 882 goto out; 883 } 884 885 while ((zero_cpos + zero_clusters) < last_cpos) { 886 rc = ocfs2_get_clusters(inode, zero_cpos + zero_clusters, 887 &p_cpos, &num_clusters, 888 &ext_flags); 889 if (rc) { 890 mlog_errno(rc); 891 goto out; 892 } 893 894 if (!p_cpos || (ext_flags & OCFS2_EXT_UNWRITTEN)) 895 break; 896 if (ext_flags & OCFS2_EXT_REFCOUNTED) 897 needs_cow = 1; 898 zero_clusters += num_clusters; 899 } 900 if ((zero_cpos + zero_clusters) > last_cpos) 901 zero_clusters = last_cpos - zero_cpos; 902 903 if (needs_cow) { 904 rc = ocfs2_refcount_cow(inode, NULL, di_bh, zero_cpos, 905 zero_clusters, UINT_MAX); 906 if (rc) { 907 mlog_errno(rc); 908 goto out; 909 } 910 } 911 912 *range_start = ocfs2_clusters_to_bytes(inode->i_sb, zero_cpos); 913 *range_end = ocfs2_clusters_to_bytes(inode->i_sb, 914 zero_cpos + zero_clusters); 915 916 out: 917 return rc; 918 } 919 920 /* 921 * Zero one range returned from ocfs2_zero_extend_get_range(). The caller 922 * has made sure that the entire range needs zeroing. 923 */ 924 static int ocfs2_zero_extend_range(struct inode *inode, u64 range_start, 925 u64 range_end) 926 { 927 int rc = 0; 928 u64 next_pos; 929 u64 zero_pos = range_start; 930 931 mlog(0, "range_start = %llu, range_end = %llu\n", 932 (unsigned long long)range_start, 933 (unsigned long long)range_end); 934 BUG_ON(range_start >= range_end); 935 936 while (zero_pos < range_end) { 937 next_pos = (zero_pos & PAGE_CACHE_MASK) + PAGE_CACHE_SIZE; 938 if (next_pos > range_end) 939 next_pos = range_end; 940 rc = ocfs2_write_zero_page(inode, zero_pos, next_pos); 941 if (rc < 0) { 942 mlog_errno(rc); 943 break; 944 } 945 zero_pos = next_pos; 946 947 /* 948 * Very large extends have the potential to lock up 949 * the cpu for extended periods of time. 950 */ 951 cond_resched(); 952 } 953 954 return rc; 955 } 956 957 int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh, 958 loff_t zero_to_size) 959 { 960 int ret = 0; 961 u64 zero_start, range_start = 0, range_end = 0; 962 struct super_block *sb = inode->i_sb; 963 964 zero_start = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode)); 965 mlog(0, "zero_start %llu for i_size %llu\n", 966 (unsigned long long)zero_start, 967 (unsigned long long)i_size_read(inode)); 968 while (zero_start < zero_to_size) { 969 ret = ocfs2_zero_extend_get_range(inode, di_bh, zero_start, 970 zero_to_size, 971 &range_start, 972 &range_end); 973 if (ret) { 974 mlog_errno(ret); 975 break; 976 } 977 if (!range_end) 978 break; 979 /* Trim the ends */ 980 if (range_start < zero_start) 981 range_start = zero_start; 982 if (range_end > zero_to_size) 983 range_end = zero_to_size; 984 985 ret = ocfs2_zero_extend_range(inode, range_start, 986 range_end); 987 if (ret) { 988 mlog_errno(ret); 989 break; 990 } 991 zero_start = range_end; 992 } 993 994 return ret; 995 } 996 997 int ocfs2_extend_no_holes(struct inode *inode, struct buffer_head *di_bh, 998 u64 new_i_size, u64 zero_to) 999 { 1000 int ret; 1001 u32 clusters_to_add; 1002 struct ocfs2_inode_info *oi = OCFS2_I(inode); 1003 1004 /* 1005 * Only quota files call this without a bh, and they can't be 1006 * refcounted. 1007 */ 1008 BUG_ON(!di_bh && (oi->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL)); 1009 BUG_ON(!di_bh && !(oi->ip_flags & OCFS2_INODE_SYSTEM_FILE)); 1010 1011 clusters_to_add = ocfs2_clusters_for_bytes(inode->i_sb, new_i_size); 1012 if (clusters_to_add < oi->ip_clusters) 1013 clusters_to_add = 0; 1014 else 1015 clusters_to_add -= oi->ip_clusters; 1016 1017 if (clusters_to_add) { 1018 ret = __ocfs2_extend_allocation(inode, oi->ip_clusters, 1019 clusters_to_add, 0); 1020 if (ret) { 1021 mlog_errno(ret); 1022 goto out; 1023 } 1024 } 1025 1026 /* 1027 * Call this even if we don't add any clusters to the tree. We 1028 * still need to zero the area between the old i_size and the 1029 * new i_size. 1030 */ 1031 ret = ocfs2_zero_extend(inode, di_bh, zero_to); 1032 if (ret < 0) 1033 mlog_errno(ret); 1034 1035 out: 1036 return ret; 1037 } 1038 1039 static int ocfs2_extend_file(struct inode *inode, 1040 struct buffer_head *di_bh, 1041 u64 new_i_size) 1042 { 1043 int ret = 0; 1044 struct ocfs2_inode_info *oi = OCFS2_I(inode); 1045 1046 BUG_ON(!di_bh); 1047 1048 /* setattr sometimes calls us like this. */ 1049 if (new_i_size == 0) 1050 goto out; 1051 1052 if (i_size_read(inode) == new_i_size) 1053 goto out; 1054 BUG_ON(new_i_size < i_size_read(inode)); 1055 1056 /* 1057 * The alloc sem blocks people in read/write from reading our 1058 * allocation until we're done changing it. We depend on 1059 * i_mutex to block other extend/truncate calls while we're 1060 * here. We even have to hold it for sparse files because there 1061 * might be some tail zeroing. 1062 */ 1063 down_write(&oi->ip_alloc_sem); 1064 1065 if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) { 1066 /* 1067 * We can optimize small extends by keeping the inodes 1068 * inline data. 1069 */ 1070 if (ocfs2_size_fits_inline_data(di_bh, new_i_size)) { 1071 up_write(&oi->ip_alloc_sem); 1072 goto out_update_size; 1073 } 1074 1075 ret = ocfs2_convert_inline_data_to_extents(inode, di_bh); 1076 if (ret) { 1077 up_write(&oi->ip_alloc_sem); 1078 mlog_errno(ret); 1079 goto out; 1080 } 1081 } 1082 1083 if (ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb))) 1084 ret = ocfs2_zero_extend(inode, di_bh, new_i_size); 1085 else 1086 ret = ocfs2_extend_no_holes(inode, di_bh, new_i_size, 1087 new_i_size); 1088 1089 up_write(&oi->ip_alloc_sem); 1090 1091 if (ret < 0) { 1092 mlog_errno(ret); 1093 goto out; 1094 } 1095 1096 out_update_size: 1097 ret = ocfs2_simple_size_update(inode, di_bh, new_i_size); 1098 if (ret < 0) 1099 mlog_errno(ret); 1100 1101 out: 1102 return ret; 1103 } 1104 1105 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr) 1106 { 1107 int status = 0, size_change; 1108 struct inode *inode = dentry->d_inode; 1109 struct super_block *sb = inode->i_sb; 1110 struct ocfs2_super *osb = OCFS2_SB(sb); 1111 struct buffer_head *bh = NULL; 1112 handle_t *handle = NULL; 1113 struct dquot *transfer_to[MAXQUOTAS] = { }; 1114 int qtype; 1115 1116 mlog_entry("(0x%p, '%.*s')\n", dentry, 1117 dentry->d_name.len, dentry->d_name.name); 1118 1119 /* ensuring we don't even attempt to truncate a symlink */ 1120 if (S_ISLNK(inode->i_mode)) 1121 attr->ia_valid &= ~ATTR_SIZE; 1122 1123 if (attr->ia_valid & ATTR_MODE) 1124 mlog(0, "mode change: %d\n", attr->ia_mode); 1125 if (attr->ia_valid & ATTR_UID) 1126 mlog(0, "uid change: %d\n", attr->ia_uid); 1127 if (attr->ia_valid & ATTR_GID) 1128 mlog(0, "gid change: %d\n", attr->ia_gid); 1129 if (attr->ia_valid & ATTR_SIZE) 1130 mlog(0, "size change...\n"); 1131 if (attr->ia_valid & (ATTR_ATIME | ATTR_MTIME | ATTR_CTIME)) 1132 mlog(0, "time change...\n"); 1133 1134 #define OCFS2_VALID_ATTRS (ATTR_ATIME | ATTR_MTIME | ATTR_CTIME | ATTR_SIZE \ 1135 | ATTR_GID | ATTR_UID | ATTR_MODE) 1136 if (!(attr->ia_valid & OCFS2_VALID_ATTRS)) { 1137 mlog(0, "can't handle attrs: 0x%x\n", attr->ia_valid); 1138 return 0; 1139 } 1140 1141 status = inode_change_ok(inode, attr); 1142 if (status) 1143 return status; 1144 1145 if (is_quota_modification(inode, attr)) 1146 dquot_initialize(inode); 1147 size_change = S_ISREG(inode->i_mode) && attr->ia_valid & ATTR_SIZE; 1148 if (size_change) { 1149 status = ocfs2_rw_lock(inode, 1); 1150 if (status < 0) { 1151 mlog_errno(status); 1152 goto bail; 1153 } 1154 } 1155 1156 status = ocfs2_inode_lock(inode, &bh, 1); 1157 if (status < 0) { 1158 if (status != -ENOENT) 1159 mlog_errno(status); 1160 goto bail_unlock_rw; 1161 } 1162 1163 if (size_change && attr->ia_size != i_size_read(inode)) { 1164 status = inode_newsize_ok(inode, attr->ia_size); 1165 if (status) 1166 goto bail_unlock; 1167 1168 if (i_size_read(inode) > attr->ia_size) { 1169 if (ocfs2_should_order_data(inode)) { 1170 status = ocfs2_begin_ordered_truncate(inode, 1171 attr->ia_size); 1172 if (status) 1173 goto bail_unlock; 1174 } 1175 status = ocfs2_truncate_file(inode, bh, attr->ia_size); 1176 } else 1177 status = ocfs2_extend_file(inode, bh, attr->ia_size); 1178 if (status < 0) { 1179 if (status != -ENOSPC) 1180 mlog_errno(status); 1181 status = -ENOSPC; 1182 goto bail_unlock; 1183 } 1184 } 1185 1186 if ((attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) || 1187 (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) { 1188 /* 1189 * Gather pointers to quota structures so that allocation / 1190 * freeing of quota structures happens here and not inside 1191 * dquot_transfer() where we have problems with lock ordering 1192 */ 1193 if (attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid 1194 && OCFS2_HAS_RO_COMPAT_FEATURE(sb, 1195 OCFS2_FEATURE_RO_COMPAT_USRQUOTA)) { 1196 transfer_to[USRQUOTA] = dqget(sb, attr->ia_uid, 1197 USRQUOTA); 1198 if (!transfer_to[USRQUOTA]) { 1199 status = -ESRCH; 1200 goto bail_unlock; 1201 } 1202 } 1203 if (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid 1204 && OCFS2_HAS_RO_COMPAT_FEATURE(sb, 1205 OCFS2_FEATURE_RO_COMPAT_GRPQUOTA)) { 1206 transfer_to[GRPQUOTA] = dqget(sb, attr->ia_gid, 1207 GRPQUOTA); 1208 if (!transfer_to[GRPQUOTA]) { 1209 status = -ESRCH; 1210 goto bail_unlock; 1211 } 1212 } 1213 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS + 1214 2 * ocfs2_quota_trans_credits(sb)); 1215 if (IS_ERR(handle)) { 1216 status = PTR_ERR(handle); 1217 mlog_errno(status); 1218 goto bail_unlock; 1219 } 1220 status = __dquot_transfer(inode, transfer_to); 1221 if (status < 0) 1222 goto bail_commit; 1223 } else { 1224 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); 1225 if (IS_ERR(handle)) { 1226 status = PTR_ERR(handle); 1227 mlog_errno(status); 1228 goto bail_unlock; 1229 } 1230 } 1231 1232 /* 1233 * This will intentionally not wind up calling truncate_setsize(), 1234 * since all the work for a size change has been done above. 1235 * Otherwise, we could get into problems with truncate as 1236 * ip_alloc_sem is used there to protect against i_size 1237 * changes. 1238 * 1239 * XXX: this means the conditional below can probably be removed. 1240 */ 1241 if ((attr->ia_valid & ATTR_SIZE) && 1242 attr->ia_size != i_size_read(inode)) { 1243 status = vmtruncate(inode, attr->ia_size); 1244 if (status) { 1245 mlog_errno(status); 1246 goto bail_commit; 1247 } 1248 } 1249 1250 setattr_copy(inode, attr); 1251 mark_inode_dirty(inode); 1252 1253 status = ocfs2_mark_inode_dirty(handle, inode, bh); 1254 if (status < 0) 1255 mlog_errno(status); 1256 1257 bail_commit: 1258 ocfs2_commit_trans(osb, handle); 1259 bail_unlock: 1260 ocfs2_inode_unlock(inode, 1); 1261 bail_unlock_rw: 1262 if (size_change) 1263 ocfs2_rw_unlock(inode, 1); 1264 bail: 1265 brelse(bh); 1266 1267 /* Release quota pointers in case we acquired them */ 1268 for (qtype = 0; qtype < MAXQUOTAS; qtype++) 1269 dqput(transfer_to[qtype]); 1270 1271 if (!status && attr->ia_valid & ATTR_MODE) { 1272 status = ocfs2_acl_chmod(inode); 1273 if (status < 0) 1274 mlog_errno(status); 1275 } 1276 1277 mlog_exit(status); 1278 return status; 1279 } 1280 1281 int ocfs2_getattr(struct vfsmount *mnt, 1282 struct dentry *dentry, 1283 struct kstat *stat) 1284 { 1285 struct inode *inode = dentry->d_inode; 1286 struct super_block *sb = dentry->d_inode->i_sb; 1287 struct ocfs2_super *osb = sb->s_fs_info; 1288 int err; 1289 1290 mlog_entry_void(); 1291 1292 err = ocfs2_inode_revalidate(dentry); 1293 if (err) { 1294 if (err != -ENOENT) 1295 mlog_errno(err); 1296 goto bail; 1297 } 1298 1299 generic_fillattr(inode, stat); 1300 1301 /* We set the blksize from the cluster size for performance */ 1302 stat->blksize = osb->s_clustersize; 1303 1304 bail: 1305 mlog_exit(err); 1306 1307 return err; 1308 } 1309 1310 int ocfs2_permission(struct inode *inode, int mask) 1311 { 1312 int ret; 1313 1314 mlog_entry_void(); 1315 1316 ret = ocfs2_inode_lock(inode, NULL, 0); 1317 if (ret) { 1318 if (ret != -ENOENT) 1319 mlog_errno(ret); 1320 goto out; 1321 } 1322 1323 ret = generic_permission(inode, mask, ocfs2_check_acl); 1324 1325 ocfs2_inode_unlock(inode, 0); 1326 out: 1327 mlog_exit(ret); 1328 return ret; 1329 } 1330 1331 static int __ocfs2_write_remove_suid(struct inode *inode, 1332 struct buffer_head *bh) 1333 { 1334 int ret; 1335 handle_t *handle; 1336 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 1337 struct ocfs2_dinode *di; 1338 1339 mlog_entry("(Inode %llu, mode 0%o)\n", 1340 (unsigned long long)OCFS2_I(inode)->ip_blkno, inode->i_mode); 1341 1342 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); 1343 if (IS_ERR(handle)) { 1344 ret = PTR_ERR(handle); 1345 mlog_errno(ret); 1346 goto out; 1347 } 1348 1349 ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), bh, 1350 OCFS2_JOURNAL_ACCESS_WRITE); 1351 if (ret < 0) { 1352 mlog_errno(ret); 1353 goto out_trans; 1354 } 1355 1356 inode->i_mode &= ~S_ISUID; 1357 if ((inode->i_mode & S_ISGID) && (inode->i_mode & S_IXGRP)) 1358 inode->i_mode &= ~S_ISGID; 1359 1360 di = (struct ocfs2_dinode *) bh->b_data; 1361 di->i_mode = cpu_to_le16(inode->i_mode); 1362 1363 ocfs2_journal_dirty(handle, bh); 1364 1365 out_trans: 1366 ocfs2_commit_trans(osb, handle); 1367 out: 1368 mlog_exit(ret); 1369 return ret; 1370 } 1371 1372 /* 1373 * Will look for holes and unwritten extents in the range starting at 1374 * pos for count bytes (inclusive). 1375 */ 1376 static int ocfs2_check_range_for_holes(struct inode *inode, loff_t pos, 1377 size_t count) 1378 { 1379 int ret = 0; 1380 unsigned int extent_flags; 1381 u32 cpos, clusters, extent_len, phys_cpos; 1382 struct super_block *sb = inode->i_sb; 1383 1384 cpos = pos >> OCFS2_SB(sb)->s_clustersize_bits; 1385 clusters = ocfs2_clusters_for_bytes(sb, pos + count) - cpos; 1386 1387 while (clusters) { 1388 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, &extent_len, 1389 &extent_flags); 1390 if (ret < 0) { 1391 mlog_errno(ret); 1392 goto out; 1393 } 1394 1395 if (phys_cpos == 0 || (extent_flags & OCFS2_EXT_UNWRITTEN)) { 1396 ret = 1; 1397 break; 1398 } 1399 1400 if (extent_len > clusters) 1401 extent_len = clusters; 1402 1403 clusters -= extent_len; 1404 cpos += extent_len; 1405 } 1406 out: 1407 return ret; 1408 } 1409 1410 static int ocfs2_write_remove_suid(struct inode *inode) 1411 { 1412 int ret; 1413 struct buffer_head *bh = NULL; 1414 1415 ret = ocfs2_read_inode_block(inode, &bh); 1416 if (ret < 0) { 1417 mlog_errno(ret); 1418 goto out; 1419 } 1420 1421 ret = __ocfs2_write_remove_suid(inode, bh); 1422 out: 1423 brelse(bh); 1424 return ret; 1425 } 1426 1427 /* 1428 * Allocate enough extents to cover the region starting at byte offset 1429 * start for len bytes. Existing extents are skipped, any extents 1430 * added are marked as "unwritten". 1431 */ 1432 static int ocfs2_allocate_unwritten_extents(struct inode *inode, 1433 u64 start, u64 len) 1434 { 1435 int ret; 1436 u32 cpos, phys_cpos, clusters, alloc_size; 1437 u64 end = start + len; 1438 struct buffer_head *di_bh = NULL; 1439 1440 if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { 1441 ret = ocfs2_read_inode_block(inode, &di_bh); 1442 if (ret) { 1443 mlog_errno(ret); 1444 goto out; 1445 } 1446 1447 /* 1448 * Nothing to do if the requested reservation range 1449 * fits within the inode. 1450 */ 1451 if (ocfs2_size_fits_inline_data(di_bh, end)) 1452 goto out; 1453 1454 ret = ocfs2_convert_inline_data_to_extents(inode, di_bh); 1455 if (ret) { 1456 mlog_errno(ret); 1457 goto out; 1458 } 1459 } 1460 1461 /* 1462 * We consider both start and len to be inclusive. 1463 */ 1464 cpos = start >> OCFS2_SB(inode->i_sb)->s_clustersize_bits; 1465 clusters = ocfs2_clusters_for_bytes(inode->i_sb, start + len); 1466 clusters -= cpos; 1467 1468 while (clusters) { 1469 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, 1470 &alloc_size, NULL); 1471 if (ret) { 1472 mlog_errno(ret); 1473 goto out; 1474 } 1475 1476 /* 1477 * Hole or existing extent len can be arbitrary, so 1478 * cap it to our own allocation request. 1479 */ 1480 if (alloc_size > clusters) 1481 alloc_size = clusters; 1482 1483 if (phys_cpos) { 1484 /* 1485 * We already have an allocation at this 1486 * region so we can safely skip it. 1487 */ 1488 goto next; 1489 } 1490 1491 ret = __ocfs2_extend_allocation(inode, cpos, alloc_size, 1); 1492 if (ret) { 1493 if (ret != -ENOSPC) 1494 mlog_errno(ret); 1495 goto out; 1496 } 1497 1498 next: 1499 cpos += alloc_size; 1500 clusters -= alloc_size; 1501 } 1502 1503 ret = 0; 1504 out: 1505 1506 brelse(di_bh); 1507 return ret; 1508 } 1509 1510 /* 1511 * Truncate a byte range, avoiding pages within partial clusters. This 1512 * preserves those pages for the zeroing code to write to. 1513 */ 1514 static void ocfs2_truncate_cluster_pages(struct inode *inode, u64 byte_start, 1515 u64 byte_len) 1516 { 1517 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 1518 loff_t start, end; 1519 struct address_space *mapping = inode->i_mapping; 1520 1521 start = (loff_t)ocfs2_align_bytes_to_clusters(inode->i_sb, byte_start); 1522 end = byte_start + byte_len; 1523 end = end & ~(osb->s_clustersize - 1); 1524 1525 if (start < end) { 1526 unmap_mapping_range(mapping, start, end - start, 0); 1527 truncate_inode_pages_range(mapping, start, end - 1); 1528 } 1529 } 1530 1531 static int ocfs2_zero_partial_clusters(struct inode *inode, 1532 u64 start, u64 len) 1533 { 1534 int ret = 0; 1535 u64 tmpend, end = start + len; 1536 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 1537 unsigned int csize = osb->s_clustersize; 1538 handle_t *handle; 1539 1540 /* 1541 * The "start" and "end" values are NOT necessarily part of 1542 * the range whose allocation is being deleted. Rather, this 1543 * is what the user passed in with the request. We must zero 1544 * partial clusters here. There's no need to worry about 1545 * physical allocation - the zeroing code knows to skip holes. 1546 */ 1547 mlog(0, "byte start: %llu, end: %llu\n", 1548 (unsigned long long)start, (unsigned long long)end); 1549 1550 /* 1551 * If both edges are on a cluster boundary then there's no 1552 * zeroing required as the region is part of the allocation to 1553 * be truncated. 1554 */ 1555 if ((start & (csize - 1)) == 0 && (end & (csize - 1)) == 0) 1556 goto out; 1557 1558 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); 1559 if (IS_ERR(handle)) { 1560 ret = PTR_ERR(handle); 1561 mlog_errno(ret); 1562 goto out; 1563 } 1564 1565 /* 1566 * We want to get the byte offset of the end of the 1st cluster. 1567 */ 1568 tmpend = (u64)osb->s_clustersize + (start & ~(osb->s_clustersize - 1)); 1569 if (tmpend > end) 1570 tmpend = end; 1571 1572 mlog(0, "1st range: start: %llu, tmpend: %llu\n", 1573 (unsigned long long)start, (unsigned long long)tmpend); 1574 1575 ret = ocfs2_zero_range_for_truncate(inode, handle, start, tmpend); 1576 if (ret) 1577 mlog_errno(ret); 1578 1579 if (tmpend < end) { 1580 /* 1581 * This may make start and end equal, but the zeroing 1582 * code will skip any work in that case so there's no 1583 * need to catch it up here. 1584 */ 1585 start = end & ~(osb->s_clustersize - 1); 1586 1587 mlog(0, "2nd range: start: %llu, end: %llu\n", 1588 (unsigned long long)start, (unsigned long long)end); 1589 1590 ret = ocfs2_zero_range_for_truncate(inode, handle, start, end); 1591 if (ret) 1592 mlog_errno(ret); 1593 } 1594 1595 ocfs2_commit_trans(osb, handle); 1596 out: 1597 return ret; 1598 } 1599 1600 static int ocfs2_find_rec(struct ocfs2_extent_list *el, u32 pos) 1601 { 1602 int i; 1603 struct ocfs2_extent_rec *rec = NULL; 1604 1605 for (i = le16_to_cpu(el->l_next_free_rec) - 1; i >= 0; i--) { 1606 1607 rec = &el->l_recs[i]; 1608 1609 if (le32_to_cpu(rec->e_cpos) < pos) 1610 break; 1611 } 1612 1613 return i; 1614 } 1615 1616 /* 1617 * Helper to calculate the punching pos and length in one run, we handle the 1618 * following three cases in order: 1619 * 1620 * - remove the entire record 1621 * - remove a partial record 1622 * - no record needs to be removed (hole-punching completed) 1623 */ 1624 static void ocfs2_calc_trunc_pos(struct inode *inode, 1625 struct ocfs2_extent_list *el, 1626 struct ocfs2_extent_rec *rec, 1627 u32 trunc_start, u32 *trunc_cpos, 1628 u32 *trunc_len, u32 *trunc_end, 1629 u64 *blkno, int *done) 1630 { 1631 int ret = 0; 1632 u32 coff, range; 1633 1634 range = le32_to_cpu(rec->e_cpos) + ocfs2_rec_clusters(el, rec); 1635 1636 if (le32_to_cpu(rec->e_cpos) >= trunc_start) { 1637 *trunc_cpos = le32_to_cpu(rec->e_cpos); 1638 /* 1639 * Skip holes if any. 1640 */ 1641 if (range < *trunc_end) 1642 *trunc_end = range; 1643 *trunc_len = *trunc_end - le32_to_cpu(rec->e_cpos); 1644 *blkno = le64_to_cpu(rec->e_blkno); 1645 *trunc_end = le32_to_cpu(rec->e_cpos); 1646 } else if (range > trunc_start) { 1647 *trunc_cpos = trunc_start; 1648 *trunc_len = *trunc_end - trunc_start; 1649 coff = trunc_start - le32_to_cpu(rec->e_cpos); 1650 *blkno = le64_to_cpu(rec->e_blkno) + 1651 ocfs2_clusters_to_blocks(inode->i_sb, coff); 1652 *trunc_end = trunc_start; 1653 } else { 1654 /* 1655 * It may have two following possibilities: 1656 * 1657 * - last record has been removed 1658 * - trunc_start was within a hole 1659 * 1660 * both two cases mean the completion of hole punching. 1661 */ 1662 ret = 1; 1663 } 1664 1665 *done = ret; 1666 } 1667 1668 static int ocfs2_remove_inode_range(struct inode *inode, 1669 struct buffer_head *di_bh, u64 byte_start, 1670 u64 byte_len) 1671 { 1672 int ret = 0, flags = 0, done = 0, i; 1673 u32 trunc_start, trunc_len, trunc_end, trunc_cpos, phys_cpos; 1674 u32 cluster_in_el; 1675 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 1676 struct ocfs2_cached_dealloc_ctxt dealloc; 1677 struct address_space *mapping = inode->i_mapping; 1678 struct ocfs2_extent_tree et; 1679 struct ocfs2_path *path = NULL; 1680 struct ocfs2_extent_list *el = NULL; 1681 struct ocfs2_extent_rec *rec = NULL; 1682 struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data; 1683 u64 blkno, refcount_loc = le64_to_cpu(di->i_refcount_loc); 1684 1685 ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), di_bh); 1686 ocfs2_init_dealloc_ctxt(&dealloc); 1687 1688 if (byte_len == 0) 1689 return 0; 1690 1691 if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { 1692 ret = ocfs2_truncate_inline(inode, di_bh, byte_start, 1693 byte_start + byte_len, 0); 1694 if (ret) { 1695 mlog_errno(ret); 1696 goto out; 1697 } 1698 /* 1699 * There's no need to get fancy with the page cache 1700 * truncate of an inline-data inode. We're talking 1701 * about less than a page here, which will be cached 1702 * in the dinode buffer anyway. 1703 */ 1704 unmap_mapping_range(mapping, 0, 0, 0); 1705 truncate_inode_pages(mapping, 0); 1706 goto out; 1707 } 1708 1709 /* 1710 * For reflinks, we may need to CoW 2 clusters which might be 1711 * partially zero'd later, if hole's start and end offset were 1712 * within one cluster(means is not exactly aligned to clustersize). 1713 */ 1714 1715 if (OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL) { 1716 1717 ret = ocfs2_cow_file_pos(inode, di_bh, byte_start); 1718 if (ret) { 1719 mlog_errno(ret); 1720 goto out; 1721 } 1722 1723 ret = ocfs2_cow_file_pos(inode, di_bh, byte_start + byte_len); 1724 if (ret) { 1725 mlog_errno(ret); 1726 goto out; 1727 } 1728 } 1729 1730 trunc_start = ocfs2_clusters_for_bytes(osb->sb, byte_start); 1731 trunc_end = (byte_start + byte_len) >> osb->s_clustersize_bits; 1732 cluster_in_el = trunc_end; 1733 1734 mlog(0, "Inode: %llu, start: %llu, len: %llu, cstart: %u, cend: %u\n", 1735 (unsigned long long)OCFS2_I(inode)->ip_blkno, 1736 (unsigned long long)byte_start, 1737 (unsigned long long)byte_len, trunc_start, trunc_end); 1738 1739 ret = ocfs2_zero_partial_clusters(inode, byte_start, byte_len); 1740 if (ret) { 1741 mlog_errno(ret); 1742 goto out; 1743 } 1744 1745 path = ocfs2_new_path_from_et(&et); 1746 if (!path) { 1747 ret = -ENOMEM; 1748 mlog_errno(ret); 1749 goto out; 1750 } 1751 1752 while (trunc_end > trunc_start) { 1753 1754 ret = ocfs2_find_path(INODE_CACHE(inode), path, 1755 cluster_in_el); 1756 if (ret) { 1757 mlog_errno(ret); 1758 goto out; 1759 } 1760 1761 el = path_leaf_el(path); 1762 1763 i = ocfs2_find_rec(el, trunc_end); 1764 /* 1765 * Need to go to previous extent block. 1766 */ 1767 if (i < 0) { 1768 if (path->p_tree_depth == 0) 1769 break; 1770 1771 ret = ocfs2_find_cpos_for_left_leaf(inode->i_sb, 1772 path, 1773 &cluster_in_el); 1774 if (ret) { 1775 mlog_errno(ret); 1776 goto out; 1777 } 1778 1779 /* 1780 * We've reached the leftmost extent block, 1781 * it's safe to leave. 1782 */ 1783 if (cluster_in_el == 0) 1784 break; 1785 1786 /* 1787 * The 'pos' searched for previous extent block is 1788 * always one cluster less than actual trunc_end. 1789 */ 1790 trunc_end = cluster_in_el + 1; 1791 1792 ocfs2_reinit_path(path, 1); 1793 1794 continue; 1795 1796 } else 1797 rec = &el->l_recs[i]; 1798 1799 ocfs2_calc_trunc_pos(inode, el, rec, trunc_start, &trunc_cpos, 1800 &trunc_len, &trunc_end, &blkno, &done); 1801 if (done) 1802 break; 1803 1804 flags = rec->e_flags; 1805 phys_cpos = ocfs2_blocks_to_clusters(inode->i_sb, blkno); 1806 1807 ret = ocfs2_remove_btree_range(inode, &et, trunc_cpos, 1808 phys_cpos, trunc_len, flags, 1809 &dealloc, refcount_loc); 1810 if (ret < 0) { 1811 mlog_errno(ret); 1812 goto out; 1813 } 1814 1815 cluster_in_el = trunc_end; 1816 1817 ocfs2_reinit_path(path, 1); 1818 } 1819 1820 ocfs2_truncate_cluster_pages(inode, byte_start, byte_len); 1821 1822 out: 1823 ocfs2_schedule_truncate_log_flush(osb, 1); 1824 ocfs2_run_deallocs(osb, &dealloc); 1825 1826 return ret; 1827 } 1828 1829 /* 1830 * Parts of this function taken from xfs_change_file_space() 1831 */ 1832 static int __ocfs2_change_file_space(struct file *file, struct inode *inode, 1833 loff_t f_pos, unsigned int cmd, 1834 struct ocfs2_space_resv *sr, 1835 int change_size) 1836 { 1837 int ret; 1838 s64 llen; 1839 loff_t size; 1840 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 1841 struct buffer_head *di_bh = NULL; 1842 handle_t *handle; 1843 unsigned long long max_off = inode->i_sb->s_maxbytes; 1844 1845 if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb)) 1846 return -EROFS; 1847 1848 mutex_lock(&inode->i_mutex); 1849 1850 /* 1851 * This prevents concurrent writes on other nodes 1852 */ 1853 ret = ocfs2_rw_lock(inode, 1); 1854 if (ret) { 1855 mlog_errno(ret); 1856 goto out; 1857 } 1858 1859 ret = ocfs2_inode_lock(inode, &di_bh, 1); 1860 if (ret) { 1861 mlog_errno(ret); 1862 goto out_rw_unlock; 1863 } 1864 1865 if (inode->i_flags & (S_IMMUTABLE|S_APPEND)) { 1866 ret = -EPERM; 1867 goto out_inode_unlock; 1868 } 1869 1870 switch (sr->l_whence) { 1871 case 0: /*SEEK_SET*/ 1872 break; 1873 case 1: /*SEEK_CUR*/ 1874 sr->l_start += f_pos; 1875 break; 1876 case 2: /*SEEK_END*/ 1877 sr->l_start += i_size_read(inode); 1878 break; 1879 default: 1880 ret = -EINVAL; 1881 goto out_inode_unlock; 1882 } 1883 sr->l_whence = 0; 1884 1885 llen = sr->l_len > 0 ? sr->l_len - 1 : sr->l_len; 1886 1887 if (sr->l_start < 0 1888 || sr->l_start > max_off 1889 || (sr->l_start + llen) < 0 1890 || (sr->l_start + llen) > max_off) { 1891 ret = -EINVAL; 1892 goto out_inode_unlock; 1893 } 1894 size = sr->l_start + sr->l_len; 1895 1896 if (cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) { 1897 if (sr->l_len <= 0) { 1898 ret = -EINVAL; 1899 goto out_inode_unlock; 1900 } 1901 } 1902 1903 if (file && should_remove_suid(file->f_path.dentry)) { 1904 ret = __ocfs2_write_remove_suid(inode, di_bh); 1905 if (ret) { 1906 mlog_errno(ret); 1907 goto out_inode_unlock; 1908 } 1909 } 1910 1911 down_write(&OCFS2_I(inode)->ip_alloc_sem); 1912 switch (cmd) { 1913 case OCFS2_IOC_RESVSP: 1914 case OCFS2_IOC_RESVSP64: 1915 /* 1916 * This takes unsigned offsets, but the signed ones we 1917 * pass have been checked against overflow above. 1918 */ 1919 ret = ocfs2_allocate_unwritten_extents(inode, sr->l_start, 1920 sr->l_len); 1921 break; 1922 case OCFS2_IOC_UNRESVSP: 1923 case OCFS2_IOC_UNRESVSP64: 1924 ret = ocfs2_remove_inode_range(inode, di_bh, sr->l_start, 1925 sr->l_len); 1926 break; 1927 default: 1928 ret = -EINVAL; 1929 } 1930 up_write(&OCFS2_I(inode)->ip_alloc_sem); 1931 if (ret) { 1932 mlog_errno(ret); 1933 goto out_inode_unlock; 1934 } 1935 1936 /* 1937 * We update c/mtime for these changes 1938 */ 1939 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); 1940 if (IS_ERR(handle)) { 1941 ret = PTR_ERR(handle); 1942 mlog_errno(ret); 1943 goto out_inode_unlock; 1944 } 1945 1946 if (change_size && i_size_read(inode) < size) 1947 i_size_write(inode, size); 1948 1949 inode->i_ctime = inode->i_mtime = CURRENT_TIME; 1950 ret = ocfs2_mark_inode_dirty(handle, inode, di_bh); 1951 if (ret < 0) 1952 mlog_errno(ret); 1953 1954 ocfs2_commit_trans(osb, handle); 1955 1956 out_inode_unlock: 1957 brelse(di_bh); 1958 ocfs2_inode_unlock(inode, 1); 1959 out_rw_unlock: 1960 ocfs2_rw_unlock(inode, 1); 1961 1962 out: 1963 mutex_unlock(&inode->i_mutex); 1964 return ret; 1965 } 1966 1967 int ocfs2_change_file_space(struct file *file, unsigned int cmd, 1968 struct ocfs2_space_resv *sr) 1969 { 1970 struct inode *inode = file->f_path.dentry->d_inode; 1971 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 1972 1973 if ((cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) && 1974 !ocfs2_writes_unwritten_extents(osb)) 1975 return -ENOTTY; 1976 else if ((cmd == OCFS2_IOC_UNRESVSP || cmd == OCFS2_IOC_UNRESVSP64) && 1977 !ocfs2_sparse_alloc(osb)) 1978 return -ENOTTY; 1979 1980 if (!S_ISREG(inode->i_mode)) 1981 return -EINVAL; 1982 1983 if (!(file->f_mode & FMODE_WRITE)) 1984 return -EBADF; 1985 1986 return __ocfs2_change_file_space(file, inode, file->f_pos, cmd, sr, 0); 1987 } 1988 1989 static long ocfs2_fallocate(struct inode *inode, int mode, loff_t offset, 1990 loff_t len) 1991 { 1992 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 1993 struct ocfs2_space_resv sr; 1994 int change_size = 1; 1995 1996 if (!ocfs2_writes_unwritten_extents(osb)) 1997 return -EOPNOTSUPP; 1998 1999 if (S_ISDIR(inode->i_mode)) 2000 return -ENODEV; 2001 2002 if (mode & FALLOC_FL_KEEP_SIZE) 2003 change_size = 0; 2004 2005 sr.l_whence = 0; 2006 sr.l_start = (s64)offset; 2007 sr.l_len = (s64)len; 2008 2009 return __ocfs2_change_file_space(NULL, inode, offset, 2010 OCFS2_IOC_RESVSP64, &sr, change_size); 2011 } 2012 2013 int ocfs2_check_range_for_refcount(struct inode *inode, loff_t pos, 2014 size_t count) 2015 { 2016 int ret = 0; 2017 unsigned int extent_flags; 2018 u32 cpos, clusters, extent_len, phys_cpos; 2019 struct super_block *sb = inode->i_sb; 2020 2021 if (!ocfs2_refcount_tree(OCFS2_SB(inode->i_sb)) || 2022 !(OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL) || 2023 OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) 2024 return 0; 2025 2026 cpos = pos >> OCFS2_SB(sb)->s_clustersize_bits; 2027 clusters = ocfs2_clusters_for_bytes(sb, pos + count) - cpos; 2028 2029 while (clusters) { 2030 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, &extent_len, 2031 &extent_flags); 2032 if (ret < 0) { 2033 mlog_errno(ret); 2034 goto out; 2035 } 2036 2037 if (phys_cpos && (extent_flags & OCFS2_EXT_REFCOUNTED)) { 2038 ret = 1; 2039 break; 2040 } 2041 2042 if (extent_len > clusters) 2043 extent_len = clusters; 2044 2045 clusters -= extent_len; 2046 cpos += extent_len; 2047 } 2048 out: 2049 return ret; 2050 } 2051 2052 static int ocfs2_prepare_inode_for_refcount(struct inode *inode, 2053 struct file *file, 2054 loff_t pos, size_t count, 2055 int *meta_level) 2056 { 2057 int ret; 2058 struct buffer_head *di_bh = NULL; 2059 u32 cpos = pos >> OCFS2_SB(inode->i_sb)->s_clustersize_bits; 2060 u32 clusters = 2061 ocfs2_clusters_for_bytes(inode->i_sb, pos + count) - cpos; 2062 2063 ret = ocfs2_inode_lock(inode, &di_bh, 1); 2064 if (ret) { 2065 mlog_errno(ret); 2066 goto out; 2067 } 2068 2069 *meta_level = 1; 2070 2071 ret = ocfs2_refcount_cow(inode, file, di_bh, cpos, clusters, UINT_MAX); 2072 if (ret) 2073 mlog_errno(ret); 2074 out: 2075 brelse(di_bh); 2076 return ret; 2077 } 2078 2079 static int ocfs2_prepare_inode_for_write(struct file *file, 2080 loff_t *ppos, 2081 size_t count, 2082 int appending, 2083 int *direct_io, 2084 int *has_refcount) 2085 { 2086 int ret = 0, meta_level = 0; 2087 struct dentry *dentry = file->f_path.dentry; 2088 struct inode *inode = dentry->d_inode; 2089 loff_t saved_pos, end; 2090 2091 /* 2092 * We start with a read level meta lock and only jump to an ex 2093 * if we need to make modifications here. 2094 */ 2095 for(;;) { 2096 ret = ocfs2_inode_lock(inode, NULL, meta_level); 2097 if (ret < 0) { 2098 meta_level = -1; 2099 mlog_errno(ret); 2100 goto out; 2101 } 2102 2103 /* Clear suid / sgid if necessary. We do this here 2104 * instead of later in the write path because 2105 * remove_suid() calls ->setattr without any hint that 2106 * we may have already done our cluster locking. Since 2107 * ocfs2_setattr() *must* take cluster locks to 2108 * proceeed, this will lead us to recursively lock the 2109 * inode. There's also the dinode i_size state which 2110 * can be lost via setattr during extending writes (we 2111 * set inode->i_size at the end of a write. */ 2112 if (should_remove_suid(dentry)) { 2113 if (meta_level == 0) { 2114 ocfs2_inode_unlock(inode, meta_level); 2115 meta_level = 1; 2116 continue; 2117 } 2118 2119 ret = ocfs2_write_remove_suid(inode); 2120 if (ret < 0) { 2121 mlog_errno(ret); 2122 goto out_unlock; 2123 } 2124 } 2125 2126 /* work on a copy of ppos until we're sure that we won't have 2127 * to recalculate it due to relocking. */ 2128 if (appending) { 2129 saved_pos = i_size_read(inode); 2130 mlog(0, "O_APPEND: inode->i_size=%llu\n", saved_pos); 2131 } else { 2132 saved_pos = *ppos; 2133 } 2134 2135 end = saved_pos + count; 2136 2137 ret = ocfs2_check_range_for_refcount(inode, saved_pos, count); 2138 if (ret == 1) { 2139 ocfs2_inode_unlock(inode, meta_level); 2140 meta_level = -1; 2141 2142 ret = ocfs2_prepare_inode_for_refcount(inode, 2143 file, 2144 saved_pos, 2145 count, 2146 &meta_level); 2147 if (has_refcount) 2148 *has_refcount = 1; 2149 if (direct_io) 2150 *direct_io = 0; 2151 } 2152 2153 if (ret < 0) { 2154 mlog_errno(ret); 2155 goto out_unlock; 2156 } 2157 2158 /* 2159 * Skip the O_DIRECT checks if we don't need 2160 * them. 2161 */ 2162 if (!direct_io || !(*direct_io)) 2163 break; 2164 2165 /* 2166 * There's no sane way to do direct writes to an inode 2167 * with inline data. 2168 */ 2169 if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { 2170 *direct_io = 0; 2171 break; 2172 } 2173 2174 /* 2175 * Allowing concurrent direct writes means 2176 * i_size changes wouldn't be synchronized, so 2177 * one node could wind up truncating another 2178 * nodes writes. 2179 */ 2180 if (end > i_size_read(inode)) { 2181 *direct_io = 0; 2182 break; 2183 } 2184 2185 /* 2186 * We don't fill holes during direct io, so 2187 * check for them here. If any are found, the 2188 * caller will have to retake some cluster 2189 * locks and initiate the io as buffered. 2190 */ 2191 ret = ocfs2_check_range_for_holes(inode, saved_pos, count); 2192 if (ret == 1) { 2193 *direct_io = 0; 2194 ret = 0; 2195 } else if (ret < 0) 2196 mlog_errno(ret); 2197 break; 2198 } 2199 2200 if (appending) 2201 *ppos = saved_pos; 2202 2203 out_unlock: 2204 if (meta_level >= 0) 2205 ocfs2_inode_unlock(inode, meta_level); 2206 2207 out: 2208 return ret; 2209 } 2210 2211 static ssize_t ocfs2_file_aio_write(struct kiocb *iocb, 2212 const struct iovec *iov, 2213 unsigned long nr_segs, 2214 loff_t pos) 2215 { 2216 int ret, direct_io, appending, rw_level, have_alloc_sem = 0; 2217 int can_do_direct, has_refcount = 0; 2218 ssize_t written = 0; 2219 size_t ocount; /* original count */ 2220 size_t count; /* after file limit checks */ 2221 loff_t old_size, *ppos = &iocb->ki_pos; 2222 u32 old_clusters; 2223 struct file *file = iocb->ki_filp; 2224 struct inode *inode = file->f_path.dentry->d_inode; 2225 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); 2226 int full_coherency = !(osb->s_mount_opt & 2227 OCFS2_MOUNT_COHERENCY_BUFFERED); 2228 2229 mlog_entry("(0x%p, %u, '%.*s')\n", file, 2230 (unsigned int)nr_segs, 2231 file->f_path.dentry->d_name.len, 2232 file->f_path.dentry->d_name.name); 2233 2234 if (iocb->ki_left == 0) 2235 return 0; 2236 2237 vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE); 2238 2239 appending = file->f_flags & O_APPEND ? 1 : 0; 2240 direct_io = file->f_flags & O_DIRECT ? 1 : 0; 2241 2242 mutex_lock(&inode->i_mutex); 2243 2244 relock: 2245 /* to match setattr's i_mutex -> i_alloc_sem -> rw_lock ordering */ 2246 if (direct_io) { 2247 down_read(&inode->i_alloc_sem); 2248 have_alloc_sem = 1; 2249 } 2250 2251 /* 2252 * Concurrent O_DIRECT writes are allowed with 2253 * mount_option "coherency=buffered". 2254 */ 2255 rw_level = (!direct_io || full_coherency); 2256 2257 ret = ocfs2_rw_lock(inode, rw_level); 2258 if (ret < 0) { 2259 mlog_errno(ret); 2260 goto out_sems; 2261 } 2262 2263 /* 2264 * O_DIRECT writes with "coherency=full" need to take EX cluster 2265 * inode_lock to guarantee coherency. 2266 */ 2267 if (direct_io && full_coherency) { 2268 /* 2269 * We need to take and drop the inode lock to force 2270 * other nodes to drop their caches. Buffered I/O 2271 * already does this in write_begin(). 2272 */ 2273 ret = ocfs2_inode_lock(inode, NULL, 1); 2274 if (ret < 0) { 2275 mlog_errno(ret); 2276 goto out_sems; 2277 } 2278 2279 ocfs2_inode_unlock(inode, 1); 2280 } 2281 2282 can_do_direct = direct_io; 2283 ret = ocfs2_prepare_inode_for_write(file, ppos, 2284 iocb->ki_left, appending, 2285 &can_do_direct, &has_refcount); 2286 if (ret < 0) { 2287 mlog_errno(ret); 2288 goto out; 2289 } 2290 2291 /* 2292 * We can't complete the direct I/O as requested, fall back to 2293 * buffered I/O. 2294 */ 2295 if (direct_io && !can_do_direct) { 2296 ocfs2_rw_unlock(inode, rw_level); 2297 up_read(&inode->i_alloc_sem); 2298 2299 have_alloc_sem = 0; 2300 rw_level = -1; 2301 2302 direct_io = 0; 2303 goto relock; 2304 } 2305 2306 /* 2307 * To later detect whether a journal commit for sync writes is 2308 * necessary, we sample i_size, and cluster count here. 2309 */ 2310 old_size = i_size_read(inode); 2311 old_clusters = OCFS2_I(inode)->ip_clusters; 2312 2313 /* communicate with ocfs2_dio_end_io */ 2314 ocfs2_iocb_set_rw_locked(iocb, rw_level); 2315 2316 ret = generic_segment_checks(iov, &nr_segs, &ocount, 2317 VERIFY_READ); 2318 if (ret) 2319 goto out_dio; 2320 2321 count = ocount; 2322 ret = generic_write_checks(file, ppos, &count, 2323 S_ISBLK(inode->i_mode)); 2324 if (ret) 2325 goto out_dio; 2326 2327 if (direct_io) { 2328 written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos, 2329 ppos, count, ocount); 2330 if (written < 0) { 2331 ret = written; 2332 goto out_dio; 2333 } 2334 } else { 2335 current->backing_dev_info = file->f_mapping->backing_dev_info; 2336 written = generic_file_buffered_write(iocb, iov, nr_segs, *ppos, 2337 ppos, count, 0); 2338 current->backing_dev_info = NULL; 2339 } 2340 2341 out_dio: 2342 /* buffered aio wouldn't have proper lock coverage today */ 2343 BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT)); 2344 2345 if (((file->f_flags & O_DSYNC) && !direct_io) || IS_SYNC(inode) || 2346 ((file->f_flags & O_DIRECT) && !direct_io)) { 2347 ret = filemap_fdatawrite_range(file->f_mapping, pos, 2348 pos + count - 1); 2349 if (ret < 0) 2350 written = ret; 2351 2352 if (!ret && ((old_size != i_size_read(inode)) || 2353 (old_clusters != OCFS2_I(inode)->ip_clusters) || 2354 has_refcount)) { 2355 ret = jbd2_journal_force_commit(osb->journal->j_journal); 2356 if (ret < 0) 2357 written = ret; 2358 } 2359 2360 if (!ret) 2361 ret = filemap_fdatawait_range(file->f_mapping, pos, 2362 pos + count - 1); 2363 } 2364 2365 /* 2366 * deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io 2367 * function pointer which is called when o_direct io completes so that 2368 * it can unlock our rw lock. (it's the clustered equivalent of 2369 * i_alloc_sem; protects truncate from racing with pending ios). 2370 * Unfortunately there are error cases which call end_io and others 2371 * that don't. so we don't have to unlock the rw_lock if either an 2372 * async dio is going to do it in the future or an end_io after an 2373 * error has already done it. 2374 */ 2375 if ((ret == -EIOCBQUEUED) || (!ocfs2_iocb_is_rw_locked(iocb))) { 2376 rw_level = -1; 2377 have_alloc_sem = 0; 2378 } 2379 2380 out: 2381 if (rw_level != -1) 2382 ocfs2_rw_unlock(inode, rw_level); 2383 2384 out_sems: 2385 if (have_alloc_sem) 2386 up_read(&inode->i_alloc_sem); 2387 2388 mutex_unlock(&inode->i_mutex); 2389 2390 if (written) 2391 ret = written; 2392 mlog_exit(ret); 2393 return ret; 2394 } 2395 2396 static int ocfs2_splice_to_file(struct pipe_inode_info *pipe, 2397 struct file *out, 2398 struct splice_desc *sd) 2399 { 2400 int ret; 2401 2402 ret = ocfs2_prepare_inode_for_write(out, &sd->pos, 2403 sd->total_len, 0, NULL, NULL); 2404 if (ret < 0) { 2405 mlog_errno(ret); 2406 return ret; 2407 } 2408 2409 return splice_from_pipe_feed(pipe, sd, pipe_to_file); 2410 } 2411 2412 static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe, 2413 struct file *out, 2414 loff_t *ppos, 2415 size_t len, 2416 unsigned int flags) 2417 { 2418 int ret; 2419 struct address_space *mapping = out->f_mapping; 2420 struct inode *inode = mapping->host; 2421 struct splice_desc sd = { 2422 .total_len = len, 2423 .flags = flags, 2424 .pos = *ppos, 2425 .u.file = out, 2426 }; 2427 2428 mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe, 2429 (unsigned int)len, 2430 out->f_path.dentry->d_name.len, 2431 out->f_path.dentry->d_name.name); 2432 2433 if (pipe->inode) 2434 mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT); 2435 2436 splice_from_pipe_begin(&sd); 2437 do { 2438 ret = splice_from_pipe_next(pipe, &sd); 2439 if (ret <= 0) 2440 break; 2441 2442 mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD); 2443 ret = ocfs2_rw_lock(inode, 1); 2444 if (ret < 0) 2445 mlog_errno(ret); 2446 else { 2447 ret = ocfs2_splice_to_file(pipe, out, &sd); 2448 ocfs2_rw_unlock(inode, 1); 2449 } 2450 mutex_unlock(&inode->i_mutex); 2451 } while (ret > 0); 2452 splice_from_pipe_end(pipe, &sd); 2453 2454 if (pipe->inode) 2455 mutex_unlock(&pipe->inode->i_mutex); 2456 2457 if (sd.num_spliced) 2458 ret = sd.num_spliced; 2459 2460 if (ret > 0) { 2461 unsigned long nr_pages; 2462 int err; 2463 2464 nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; 2465 2466 err = generic_write_sync(out, *ppos, ret); 2467 if (err) 2468 ret = err; 2469 else 2470 *ppos += ret; 2471 2472 balance_dirty_pages_ratelimited_nr(mapping, nr_pages); 2473 } 2474 2475 mlog_exit(ret); 2476 return ret; 2477 } 2478 2479 static ssize_t ocfs2_file_splice_read(struct file *in, 2480 loff_t *ppos, 2481 struct pipe_inode_info *pipe, 2482 size_t len, 2483 unsigned int flags) 2484 { 2485 int ret = 0, lock_level = 0; 2486 struct inode *inode = in->f_path.dentry->d_inode; 2487 2488 mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", in, pipe, 2489 (unsigned int)len, 2490 in->f_path.dentry->d_name.len, 2491 in->f_path.dentry->d_name.name); 2492 2493 /* 2494 * See the comment in ocfs2_file_aio_read() 2495 */ 2496 ret = ocfs2_inode_lock_atime(inode, in->f_vfsmnt, &lock_level); 2497 if (ret < 0) { 2498 mlog_errno(ret); 2499 goto bail; 2500 } 2501 ocfs2_inode_unlock(inode, lock_level); 2502 2503 ret = generic_file_splice_read(in, ppos, pipe, len, flags); 2504 2505 bail: 2506 mlog_exit(ret); 2507 return ret; 2508 } 2509 2510 static ssize_t ocfs2_file_aio_read(struct kiocb *iocb, 2511 const struct iovec *iov, 2512 unsigned long nr_segs, 2513 loff_t pos) 2514 { 2515 int ret = 0, rw_level = -1, have_alloc_sem = 0, lock_level = 0; 2516 struct file *filp = iocb->ki_filp; 2517 struct inode *inode = filp->f_path.dentry->d_inode; 2518 2519 mlog_entry("(0x%p, %u, '%.*s')\n", filp, 2520 (unsigned int)nr_segs, 2521 filp->f_path.dentry->d_name.len, 2522 filp->f_path.dentry->d_name.name); 2523 2524 if (!inode) { 2525 ret = -EINVAL; 2526 mlog_errno(ret); 2527 goto bail; 2528 } 2529 2530 /* 2531 * buffered reads protect themselves in ->readpage(). O_DIRECT reads 2532 * need locks to protect pending reads from racing with truncate. 2533 */ 2534 if (filp->f_flags & O_DIRECT) { 2535 down_read(&inode->i_alloc_sem); 2536 have_alloc_sem = 1; 2537 2538 ret = ocfs2_rw_lock(inode, 0); 2539 if (ret < 0) { 2540 mlog_errno(ret); 2541 goto bail; 2542 } 2543 rw_level = 0; 2544 /* communicate with ocfs2_dio_end_io */ 2545 ocfs2_iocb_set_rw_locked(iocb, rw_level); 2546 } 2547 2548 /* 2549 * We're fine letting folks race truncates and extending 2550 * writes with read across the cluster, just like they can 2551 * locally. Hence no rw_lock during read. 2552 * 2553 * Take and drop the meta data lock to update inode fields 2554 * like i_size. This allows the checks down below 2555 * generic_file_aio_read() a chance of actually working. 2556 */ 2557 ret = ocfs2_inode_lock_atime(inode, filp->f_vfsmnt, &lock_level); 2558 if (ret < 0) { 2559 mlog_errno(ret); 2560 goto bail; 2561 } 2562 ocfs2_inode_unlock(inode, lock_level); 2563 2564 ret = generic_file_aio_read(iocb, iov, nr_segs, iocb->ki_pos); 2565 if (ret == -EINVAL) 2566 mlog(0, "generic_file_aio_read returned -EINVAL\n"); 2567 2568 /* buffered aio wouldn't have proper lock coverage today */ 2569 BUG_ON(ret == -EIOCBQUEUED && !(filp->f_flags & O_DIRECT)); 2570 2571 /* see ocfs2_file_aio_write */ 2572 if (ret == -EIOCBQUEUED || !ocfs2_iocb_is_rw_locked(iocb)) { 2573 rw_level = -1; 2574 have_alloc_sem = 0; 2575 } 2576 2577 bail: 2578 if (have_alloc_sem) 2579 up_read(&inode->i_alloc_sem); 2580 if (rw_level != -1) 2581 ocfs2_rw_unlock(inode, rw_level); 2582 mlog_exit(ret); 2583 2584 return ret; 2585 } 2586 2587 const struct inode_operations ocfs2_file_iops = { 2588 .setattr = ocfs2_setattr, 2589 .getattr = ocfs2_getattr, 2590 .permission = ocfs2_permission, 2591 .setxattr = generic_setxattr, 2592 .getxattr = generic_getxattr, 2593 .listxattr = ocfs2_listxattr, 2594 .removexattr = generic_removexattr, 2595 .fallocate = ocfs2_fallocate, 2596 .fiemap = ocfs2_fiemap, 2597 }; 2598 2599 const struct inode_operations ocfs2_special_file_iops = { 2600 .setattr = ocfs2_setattr, 2601 .getattr = ocfs2_getattr, 2602 .permission = ocfs2_permission, 2603 }; 2604 2605 /* 2606 * Other than ->lock, keep ocfs2_fops and ocfs2_dops in sync with 2607 * ocfs2_fops_no_plocks and ocfs2_dops_no_plocks! 2608 */ 2609 const struct file_operations ocfs2_fops = { 2610 .llseek = generic_file_llseek, 2611 .read = do_sync_read, 2612 .write = do_sync_write, 2613 .mmap = ocfs2_mmap, 2614 .fsync = ocfs2_sync_file, 2615 .release = ocfs2_file_release, 2616 .open = ocfs2_file_open, 2617 .aio_read = ocfs2_file_aio_read, 2618 .aio_write = ocfs2_file_aio_write, 2619 .unlocked_ioctl = ocfs2_ioctl, 2620 #ifdef CONFIG_COMPAT 2621 .compat_ioctl = ocfs2_compat_ioctl, 2622 #endif 2623 .lock = ocfs2_lock, 2624 .flock = ocfs2_flock, 2625 .splice_read = ocfs2_file_splice_read, 2626 .splice_write = ocfs2_file_splice_write, 2627 }; 2628 2629 const struct file_operations ocfs2_dops = { 2630 .llseek = generic_file_llseek, 2631 .read = generic_read_dir, 2632 .readdir = ocfs2_readdir, 2633 .fsync = ocfs2_sync_file, 2634 .release = ocfs2_dir_release, 2635 .open = ocfs2_dir_open, 2636 .unlocked_ioctl = ocfs2_ioctl, 2637 #ifdef CONFIG_COMPAT 2638 .compat_ioctl = ocfs2_compat_ioctl, 2639 #endif 2640 .lock = ocfs2_lock, 2641 .flock = ocfs2_flock, 2642 }; 2643 2644 /* 2645 * POSIX-lockless variants of our file_operations. 2646 * 2647 * These will be used if the underlying cluster stack does not support 2648 * posix file locking, if the user passes the "localflocks" mount 2649 * option, or if we have a local-only fs. 2650 * 2651 * ocfs2_flock is in here because all stacks handle UNIX file locks, 2652 * so we still want it in the case of no stack support for 2653 * plocks. Internally, it will do the right thing when asked to ignore 2654 * the cluster. 2655 */ 2656 const struct file_operations ocfs2_fops_no_plocks = { 2657 .llseek = generic_file_llseek, 2658 .read = do_sync_read, 2659 .write = do_sync_write, 2660 .mmap = ocfs2_mmap, 2661 .fsync = ocfs2_sync_file, 2662 .release = ocfs2_file_release, 2663 .open = ocfs2_file_open, 2664 .aio_read = ocfs2_file_aio_read, 2665 .aio_write = ocfs2_file_aio_write, 2666 .unlocked_ioctl = ocfs2_ioctl, 2667 #ifdef CONFIG_COMPAT 2668 .compat_ioctl = ocfs2_compat_ioctl, 2669 #endif 2670 .flock = ocfs2_flock, 2671 .splice_read = ocfs2_file_splice_read, 2672 .splice_write = ocfs2_file_splice_write, 2673 }; 2674 2675 const struct file_operations ocfs2_dops_no_plocks = { 2676 .llseek = generic_file_llseek, 2677 .read = generic_read_dir, 2678 .readdir = ocfs2_readdir, 2679 .fsync = ocfs2_sync_file, 2680 .release = ocfs2_dir_release, 2681 .open = ocfs2_dir_open, 2682 .unlocked_ioctl = ocfs2_ioctl, 2683 #ifdef CONFIG_COMPAT 2684 .compat_ioctl = ocfs2_compat_ioctl, 2685 #endif 2686 .flock = ocfs2_flock, 2687 }; 2688