xref: /linux/fs/jffs2/compr.c (revision 8fa5723aa7e053d498336b48448b292fc2e0458b)
1 /*
2  * JFFS2 -- Journalling Flash File System, Version 2.
3  *
4  * Copyright © 2001-2007 Red Hat, Inc.
5  * Created by Arjan van de Ven <arjanv@redhat.com>
6  *
7  * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
8  *		    University of Szeged, Hungary
9  *
10  * For licensing information, see the file 'LICENCE' in this directory.
11  *
12  */
13 
14 #include "compr.h"
15 
16 static DEFINE_SPINLOCK(jffs2_compressor_list_lock);
17 
18 /* Available compressors are on this list */
19 static LIST_HEAD(jffs2_compressor_list);
20 
21 /* Actual compression mode */
22 static int jffs2_compression_mode = JFFS2_COMPR_MODE_PRIORITY;
23 
24 /* Statistics for blocks stored without compression */
25 static uint32_t none_stat_compr_blocks=0,none_stat_decompr_blocks=0,none_stat_compr_size=0;
26 
27 
28 /*
29  * Return 1 to use this compression
30  */
31 static int jffs2_is_best_compression(struct jffs2_compressor *this,
32 		struct jffs2_compressor *best, uint32_t size, uint32_t bestsize)
33 {
34 	switch (jffs2_compression_mode) {
35 	case JFFS2_COMPR_MODE_SIZE:
36 		if (bestsize > size)
37 			return 1;
38 		return 0;
39 	case JFFS2_COMPR_MODE_FAVOURLZO:
40 		if ((this->compr == JFFS2_COMPR_LZO) && (bestsize > size))
41 			return 1;
42 		if ((best->compr != JFFS2_COMPR_LZO) && (bestsize > size))
43 			return 1;
44 		if ((this->compr == JFFS2_COMPR_LZO) && (bestsize > (size * FAVOUR_LZO_PERCENT / 100)))
45 			return 1;
46 		if ((bestsize * FAVOUR_LZO_PERCENT / 100) > size)
47 			return 1;
48 
49 		return 0;
50 	}
51 	/* Shouldn't happen */
52 	return 0;
53 }
54 
55 /* jffs2_compress:
56  * @data_in: Pointer to uncompressed data
57  * @cpage_out: Pointer to returned pointer to buffer for compressed data
58  * @datalen: On entry, holds the amount of data available for compression.
59  *	On exit, expected to hold the amount of data actually compressed.
60  * @cdatalen: On entry, holds the amount of space available for compressed
61  *	data. On exit, expected to hold the actual size of the compressed
62  *	data.
63  *
64  * Returns: Lower byte to be stored with data indicating compression type used.
65  * Zero is used to show that the data could not be compressed - the
66  * compressed version was actually larger than the original.
67  * Upper byte will be used later. (soon)
68  *
69  * If the cdata buffer isn't large enough to hold all the uncompressed data,
70  * jffs2_compress should compress as much as will fit, and should set
71  * *datalen accordingly to show the amount of data which were compressed.
72  */
73 uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
74 			unsigned char *data_in, unsigned char **cpage_out,
75 			uint32_t *datalen, uint32_t *cdatalen)
76 {
77 	int ret = JFFS2_COMPR_NONE;
78 	int compr_ret;
79 	struct jffs2_compressor *this, *best=NULL;
80 	unsigned char *output_buf = NULL, *tmp_buf;
81 	uint32_t orig_slen, orig_dlen;
82 	uint32_t best_slen=0, best_dlen=0;
83 
84 	switch (jffs2_compression_mode) {
85 	case JFFS2_COMPR_MODE_NONE:
86 		break;
87 	case JFFS2_COMPR_MODE_PRIORITY:
88 		output_buf = kmalloc(*cdatalen,GFP_KERNEL);
89 		if (!output_buf) {
90 			printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
91 			goto out;
92 		}
93 		orig_slen = *datalen;
94 		orig_dlen = *cdatalen;
95 		spin_lock(&jffs2_compressor_list_lock);
96 		list_for_each_entry(this, &jffs2_compressor_list, list) {
97 			/* Skip decompress-only backwards-compatibility and disabled modules */
98 			if ((!this->compress)||(this->disabled))
99 				continue;
100 
101 			this->usecount++;
102 			spin_unlock(&jffs2_compressor_list_lock);
103 			*datalen  = orig_slen;
104 			*cdatalen = orig_dlen;
105 			compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL);
106 			spin_lock(&jffs2_compressor_list_lock);
107 			this->usecount--;
108 			if (!compr_ret) {
109 				ret = this->compr;
110 				this->stat_compr_blocks++;
111 				this->stat_compr_orig_size += *datalen;
112 				this->stat_compr_new_size  += *cdatalen;
113 				break;
114 			}
115 		}
116 		spin_unlock(&jffs2_compressor_list_lock);
117 		if (ret == JFFS2_COMPR_NONE)
118 			kfree(output_buf);
119 		break;
120 	case JFFS2_COMPR_MODE_SIZE:
121 	case JFFS2_COMPR_MODE_FAVOURLZO:
122 		orig_slen = *datalen;
123 		orig_dlen = *cdatalen;
124 		spin_lock(&jffs2_compressor_list_lock);
125 		list_for_each_entry(this, &jffs2_compressor_list, list) {
126 			/* Skip decompress-only backwards-compatibility and disabled modules */
127 			if ((!this->compress)||(this->disabled))
128 				continue;
129 			/* Allocating memory for output buffer if necessary */
130 			if ((this->compr_buf_size < orig_slen) && (this->compr_buf)) {
131 				spin_unlock(&jffs2_compressor_list_lock);
132 				kfree(this->compr_buf);
133 				spin_lock(&jffs2_compressor_list_lock);
134 				this->compr_buf_size=0;
135 				this->compr_buf=NULL;
136 			}
137 			if (!this->compr_buf) {
138 				spin_unlock(&jffs2_compressor_list_lock);
139 				tmp_buf = kmalloc(orig_slen, GFP_KERNEL);
140 				spin_lock(&jffs2_compressor_list_lock);
141 				if (!tmp_buf) {
142 					printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n", orig_slen);
143 					continue;
144 				}
145 				else {
146 					this->compr_buf = tmp_buf;
147 					this->compr_buf_size = orig_slen;
148 				}
149 			}
150 			this->usecount++;
151 			spin_unlock(&jffs2_compressor_list_lock);
152 			*datalen  = orig_slen;
153 			*cdatalen = orig_dlen;
154 			compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL);
155 			spin_lock(&jffs2_compressor_list_lock);
156 			this->usecount--;
157 			if (!compr_ret) {
158 				if (((!best_dlen) || jffs2_is_best_compression(this, best, *cdatalen, best_dlen))
159 						&& (*cdatalen < *datalen)) {
160 					best_dlen = *cdatalen;
161 					best_slen = *datalen;
162 					best = this;
163 				}
164 			}
165 		}
166 		if (best_dlen) {
167 			*cdatalen = best_dlen;
168 			*datalen  = best_slen;
169 			output_buf = best->compr_buf;
170 			best->compr_buf = NULL;
171 			best->compr_buf_size = 0;
172 			best->stat_compr_blocks++;
173 			best->stat_compr_orig_size += best_slen;
174 			best->stat_compr_new_size  += best_dlen;
175 			ret = best->compr;
176 		}
177 		spin_unlock(&jffs2_compressor_list_lock);
178 		break;
179 	default:
180 		printk(KERN_ERR "JFFS2: unknow compression mode.\n");
181 	}
182  out:
183 	if (ret == JFFS2_COMPR_NONE) {
184 		*cpage_out = data_in;
185 		*datalen = *cdatalen;
186 		none_stat_compr_blocks++;
187 		none_stat_compr_size += *datalen;
188 	}
189 	else {
190 		*cpage_out = output_buf;
191 	}
192 	return ret;
193 }
194 
195 int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
196 		     uint16_t comprtype, unsigned char *cdata_in,
197 		     unsigned char *data_out, uint32_t cdatalen, uint32_t datalen)
198 {
199 	struct jffs2_compressor *this;
200 	int ret;
201 
202 	/* Older code had a bug where it would write non-zero 'usercompr'
203 	   fields. Deal with it. */
204 	if ((comprtype & 0xff) <= JFFS2_COMPR_ZLIB)
205 		comprtype &= 0xff;
206 
207 	switch (comprtype & 0xff) {
208 	case JFFS2_COMPR_NONE:
209 		/* This should be special-cased elsewhere, but we might as well deal with it */
210 		memcpy(data_out, cdata_in, datalen);
211 		none_stat_decompr_blocks++;
212 		break;
213 	case JFFS2_COMPR_ZERO:
214 		memset(data_out, 0, datalen);
215 		break;
216 	default:
217 		spin_lock(&jffs2_compressor_list_lock);
218 		list_for_each_entry(this, &jffs2_compressor_list, list) {
219 			if (comprtype == this->compr) {
220 				this->usecount++;
221 				spin_unlock(&jffs2_compressor_list_lock);
222 				ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL);
223 				spin_lock(&jffs2_compressor_list_lock);
224 				if (ret) {
225 					printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret);
226 				}
227 				else {
228 					this->stat_decompr_blocks++;
229 				}
230 				this->usecount--;
231 				spin_unlock(&jffs2_compressor_list_lock);
232 				return ret;
233 			}
234 		}
235 		printk(KERN_WARNING "JFFS2 compression type 0x%02x not available.\n", comprtype);
236 		spin_unlock(&jffs2_compressor_list_lock);
237 		return -EIO;
238 	}
239 	return 0;
240 }
241 
242 int jffs2_register_compressor(struct jffs2_compressor *comp)
243 {
244 	struct jffs2_compressor *this;
245 
246 	if (!comp->name) {
247 		printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n");
248 		return -1;
249 	}
250 	comp->compr_buf_size=0;
251 	comp->compr_buf=NULL;
252 	comp->usecount=0;
253 	comp->stat_compr_orig_size=0;
254 	comp->stat_compr_new_size=0;
255 	comp->stat_compr_blocks=0;
256 	comp->stat_decompr_blocks=0;
257 	D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name));
258 
259 	spin_lock(&jffs2_compressor_list_lock);
260 
261 	list_for_each_entry(this, &jffs2_compressor_list, list) {
262 		if (this->priority < comp->priority) {
263 			list_add(&comp->list, this->list.prev);
264 			goto out;
265 		}
266 	}
267 	list_add_tail(&comp->list, &jffs2_compressor_list);
268 out:
269 	D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
270 		printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
271 	})
272 
273 	spin_unlock(&jffs2_compressor_list_lock);
274 
275 	return 0;
276 }
277 
278 int jffs2_unregister_compressor(struct jffs2_compressor *comp)
279 {
280 	D2(struct jffs2_compressor *this;)
281 
282 	D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name));
283 
284 	spin_lock(&jffs2_compressor_list_lock);
285 
286 	if (comp->usecount) {
287 		spin_unlock(&jffs2_compressor_list_lock);
288 		printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n");
289 		return -1;
290 	}
291 	list_del(&comp->list);
292 
293 	D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
294 		printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
295 	})
296 	spin_unlock(&jffs2_compressor_list_lock);
297 	return 0;
298 }
299 
300 void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig)
301 {
302 	if (orig != comprbuf)
303 		kfree(comprbuf);
304 }
305 
306 int __init jffs2_compressors_init(void)
307 {
308 /* Registering compressors */
309 #ifdef CONFIG_JFFS2_ZLIB
310 	jffs2_zlib_init();
311 #endif
312 #ifdef CONFIG_JFFS2_RTIME
313 	jffs2_rtime_init();
314 #endif
315 #ifdef CONFIG_JFFS2_RUBIN
316 	jffs2_rubinmips_init();
317 	jffs2_dynrubin_init();
318 #endif
319 #ifdef CONFIG_JFFS2_LZO
320 	jffs2_lzo_init();
321 #endif
322 /* Setting default compression mode */
323 #ifdef CONFIG_JFFS2_CMODE_NONE
324 	jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
325 	D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");)
326 #else
327 #ifdef CONFIG_JFFS2_CMODE_SIZE
328 	jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE;
329 	D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");)
330 #else
331 #ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
332 	jffs2_compression_mode = JFFS2_COMPR_MODE_FAVOURLZO;
333 	D1(printk(KERN_INFO "JFFS2: default compression mode: favourlzo\n");)
334 #else
335 	D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");)
336 #endif
337 #endif
338 #endif
339 	return 0;
340 }
341 
342 int jffs2_compressors_exit(void)
343 {
344 /* Unregistering compressors */
345 #ifdef CONFIG_JFFS2_LZO
346 	jffs2_lzo_exit();
347 #endif
348 #ifdef CONFIG_JFFS2_RUBIN
349 	jffs2_dynrubin_exit();
350 	jffs2_rubinmips_exit();
351 #endif
352 #ifdef CONFIG_JFFS2_RTIME
353 	jffs2_rtime_exit();
354 #endif
355 #ifdef CONFIG_JFFS2_ZLIB
356 	jffs2_zlib_exit();
357 #endif
358 	return 0;
359 }
360