1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * linux/fs/exec.c 4 * 5 * Copyright (C) 1991, 1992 Linus Torvalds 6 */ 7 8 /* 9 * #!-checking implemented by tytso. 10 */ 11 /* 12 * Demand-loading implemented 01.12.91 - no need to read anything but 13 * the header into memory. The inode of the executable is put into 14 * "current->executable", and page faults do the actual loading. Clean. 15 * 16 * Once more I can proudly say that linux stood up to being changed: it 17 * was less than 2 hours work to get demand-loading completely implemented. 18 * 19 * Demand loading changed July 1993 by Eric Youngdale. Use mmap instead, 20 * current->executable is only used by the procfs. This allows a dispatch 21 * table to check for several different types of binary formats. We keep 22 * trying until we recognize the file or we run out of supported binary 23 * formats. 24 */ 25 26 #include <linux/kernel_read_file.h> 27 #include <linux/slab.h> 28 #include <linux/file.h> 29 #include <linux/fdtable.h> 30 #include <linux/mm.h> 31 #include <linux/stat.h> 32 #include <linux/fcntl.h> 33 #include <linux/swap.h> 34 #include <linux/string.h> 35 #include <linux/init.h> 36 #include <linux/sched/mm.h> 37 #include <linux/sched/coredump.h> 38 #include <linux/sched/signal.h> 39 #include <linux/sched/numa_balancing.h> 40 #include <linux/sched/task.h> 41 #include <linux/pagemap.h> 42 #include <linux/perf_event.h> 43 #include <linux/highmem.h> 44 #include <linux/spinlock.h> 45 #include <linux/key.h> 46 #include <linux/personality.h> 47 #include <linux/binfmts.h> 48 #include <linux/utsname.h> 49 #include <linux/pid_namespace.h> 50 #include <linux/module.h> 51 #include <linux/namei.h> 52 #include <linux/mount.h> 53 #include <linux/security.h> 54 #include <linux/syscalls.h> 55 #include <linux/tsacct_kern.h> 56 #include <linux/cn_proc.h> 57 #include <linux/audit.h> 58 #include <linux/kmod.h> 59 #include <linux/fsnotify.h> 60 #include <linux/fs_struct.h> 61 #include <linux/oom.h> 62 #include <linux/compat.h> 63 #include <linux/vmalloc.h> 64 #include <linux/io_uring.h> 65 #include <linux/syscall_user_dispatch.h> 66 #include <linux/coredump.h> 67 #include <linux/time_namespace.h> 68 #include <linux/user_events.h> 69 #include <linux/rseq.h> 70 #include <linux/ksm.h> 71 72 #include <linux/uaccess.h> 73 #include <asm/mmu_context.h> 74 #include <asm/tlb.h> 75 76 #include <trace/events/task.h> 77 #include "internal.h" 78 79 #include <trace/events/sched.h> 80 81 static int bprm_creds_from_file(struct linux_binprm *bprm); 82 83 int suid_dumpable = 0; 84 85 static LIST_HEAD(formats); 86 static DEFINE_RWLOCK(binfmt_lock); 87 88 void __register_binfmt(struct linux_binfmt * fmt, int insert) 89 { 90 write_lock(&binfmt_lock); 91 insert ? list_add(&fmt->lh, &formats) : 92 list_add_tail(&fmt->lh, &formats); 93 write_unlock(&binfmt_lock); 94 } 95 96 EXPORT_SYMBOL(__register_binfmt); 97 98 void unregister_binfmt(struct linux_binfmt * fmt) 99 { 100 write_lock(&binfmt_lock); 101 list_del(&fmt->lh); 102 write_unlock(&binfmt_lock); 103 } 104 105 EXPORT_SYMBOL(unregister_binfmt); 106 107 static inline void put_binfmt(struct linux_binfmt * fmt) 108 { 109 module_put(fmt->module); 110 } 111 112 bool path_noexec(const struct path *path) 113 { 114 return (path->mnt->mnt_flags & MNT_NOEXEC) || 115 (path->mnt->mnt_sb->s_iflags & SB_I_NOEXEC); 116 } 117 118 #ifdef CONFIG_USELIB 119 /* 120 * Note that a shared library must be both readable and executable due to 121 * security reasons. 122 * 123 * Also note that we take the address to load from the file itself. 124 */ 125 SYSCALL_DEFINE1(uselib, const char __user *, library) 126 { 127 struct linux_binfmt *fmt; 128 struct file *file; 129 struct filename *tmp = getname(library); 130 int error = PTR_ERR(tmp); 131 static const struct open_flags uselib_flags = { 132 .open_flag = O_LARGEFILE | O_RDONLY, 133 .acc_mode = MAY_READ | MAY_EXEC, 134 .intent = LOOKUP_OPEN, 135 .lookup_flags = LOOKUP_FOLLOW, 136 }; 137 138 if (IS_ERR(tmp)) 139 goto out; 140 141 file = do_filp_open(AT_FDCWD, tmp, &uselib_flags); 142 putname(tmp); 143 error = PTR_ERR(file); 144 if (IS_ERR(file)) 145 goto out; 146 147 /* 148 * may_open() has already checked for this, so it should be 149 * impossible to trip now. But we need to be extra cautious 150 * and check again at the very end too. 151 */ 152 error = -EACCES; 153 if (WARN_ON_ONCE(!S_ISREG(file_inode(file)->i_mode) || 154 path_noexec(&file->f_path))) 155 goto exit; 156 157 error = -ENOEXEC; 158 159 read_lock(&binfmt_lock); 160 list_for_each_entry(fmt, &formats, lh) { 161 if (!fmt->load_shlib) 162 continue; 163 if (!try_module_get(fmt->module)) 164 continue; 165 read_unlock(&binfmt_lock); 166 error = fmt->load_shlib(file); 167 read_lock(&binfmt_lock); 168 put_binfmt(fmt); 169 if (error != -ENOEXEC) 170 break; 171 } 172 read_unlock(&binfmt_lock); 173 exit: 174 fput(file); 175 out: 176 return error; 177 } 178 #endif /* #ifdef CONFIG_USELIB */ 179 180 #ifdef CONFIG_MMU 181 /* 182 * The nascent bprm->mm is not visible until exec_mmap() but it can 183 * use a lot of memory, account these pages in current->mm temporary 184 * for oom_badness()->get_mm_rss(). Once exec succeeds or fails, we 185 * change the counter back via acct_arg_size(0). 186 */ 187 static void acct_arg_size(struct linux_binprm *bprm, unsigned long pages) 188 { 189 struct mm_struct *mm = current->mm; 190 long diff = (long)(pages - bprm->vma_pages); 191 192 if (!mm || !diff) 193 return; 194 195 bprm->vma_pages = pages; 196 add_mm_counter(mm, MM_ANONPAGES, diff); 197 } 198 199 static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos, 200 int write) 201 { 202 struct page *page; 203 struct vm_area_struct *vma = bprm->vma; 204 struct mm_struct *mm = bprm->mm; 205 int ret; 206 207 /* 208 * Avoid relying on expanding the stack down in GUP (which 209 * does not work for STACK_GROWSUP anyway), and just do it 210 * by hand ahead of time. 211 */ 212 if (write && pos < vma->vm_start) { 213 mmap_write_lock(mm); 214 ret = expand_downwards(vma, pos); 215 if (unlikely(ret < 0)) { 216 mmap_write_unlock(mm); 217 return NULL; 218 } 219 mmap_write_downgrade(mm); 220 } else 221 mmap_read_lock(mm); 222 223 /* 224 * We are doing an exec(). 'current' is the process 225 * doing the exec and 'mm' is the new process's mm. 226 */ 227 ret = get_user_pages_remote(mm, pos, 1, 228 write ? FOLL_WRITE : 0, 229 &page, NULL); 230 mmap_read_unlock(mm); 231 if (ret <= 0) 232 return NULL; 233 234 if (write) 235 acct_arg_size(bprm, vma_pages(vma)); 236 237 return page; 238 } 239 240 static void put_arg_page(struct page *page) 241 { 242 put_page(page); 243 } 244 245 static void free_arg_pages(struct linux_binprm *bprm) 246 { 247 } 248 249 static void flush_arg_page(struct linux_binprm *bprm, unsigned long pos, 250 struct page *page) 251 { 252 flush_cache_page(bprm->vma, pos, page_to_pfn(page)); 253 } 254 255 static int __bprm_mm_init(struct linux_binprm *bprm) 256 { 257 int err; 258 struct vm_area_struct *vma = NULL; 259 struct mm_struct *mm = bprm->mm; 260 261 bprm->vma = vma = vm_area_alloc(mm); 262 if (!vma) 263 return -ENOMEM; 264 vma_set_anonymous(vma); 265 266 if (mmap_write_lock_killable(mm)) { 267 err = -EINTR; 268 goto err_free; 269 } 270 271 /* 272 * Need to be called with mmap write lock 273 * held, to avoid race with ksmd. 274 */ 275 err = ksm_execve(mm); 276 if (err) 277 goto err_ksm; 278 279 /* 280 * Place the stack at the largest stack address the architecture 281 * supports. Later, we'll move this to an appropriate place. We don't 282 * use STACK_TOP because that can depend on attributes which aren't 283 * configured yet. 284 */ 285 BUILD_BUG_ON(VM_STACK_FLAGS & VM_STACK_INCOMPLETE_SETUP); 286 vma->vm_end = STACK_TOP_MAX; 287 vma->vm_start = vma->vm_end - PAGE_SIZE; 288 vm_flags_init(vma, VM_SOFTDIRTY | VM_STACK_FLAGS | VM_STACK_INCOMPLETE_SETUP); 289 vma->vm_page_prot = vm_get_page_prot(vma->vm_flags); 290 291 err = insert_vm_struct(mm, vma); 292 if (err) 293 goto err; 294 295 mm->stack_vm = mm->total_vm = 1; 296 mmap_write_unlock(mm); 297 bprm->p = vma->vm_end - sizeof(void *); 298 return 0; 299 err: 300 ksm_exit(mm); 301 err_ksm: 302 mmap_write_unlock(mm); 303 err_free: 304 bprm->vma = NULL; 305 vm_area_free(vma); 306 return err; 307 } 308 309 static bool valid_arg_len(struct linux_binprm *bprm, long len) 310 { 311 return len <= MAX_ARG_STRLEN; 312 } 313 314 #else 315 316 static inline void acct_arg_size(struct linux_binprm *bprm, unsigned long pages) 317 { 318 } 319 320 static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos, 321 int write) 322 { 323 struct page *page; 324 325 page = bprm->page[pos / PAGE_SIZE]; 326 if (!page && write) { 327 page = alloc_page(GFP_HIGHUSER|__GFP_ZERO); 328 if (!page) 329 return NULL; 330 bprm->page[pos / PAGE_SIZE] = page; 331 } 332 333 return page; 334 } 335 336 static void put_arg_page(struct page *page) 337 { 338 } 339 340 static void free_arg_page(struct linux_binprm *bprm, int i) 341 { 342 if (bprm->page[i]) { 343 __free_page(bprm->page[i]); 344 bprm->page[i] = NULL; 345 } 346 } 347 348 static void free_arg_pages(struct linux_binprm *bprm) 349 { 350 int i; 351 352 for (i = 0; i < MAX_ARG_PAGES; i++) 353 free_arg_page(bprm, i); 354 } 355 356 static void flush_arg_page(struct linux_binprm *bprm, unsigned long pos, 357 struct page *page) 358 { 359 } 360 361 static int __bprm_mm_init(struct linux_binprm *bprm) 362 { 363 bprm->p = PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *); 364 return 0; 365 } 366 367 static bool valid_arg_len(struct linux_binprm *bprm, long len) 368 { 369 return len <= bprm->p; 370 } 371 372 #endif /* CONFIG_MMU */ 373 374 /* 375 * Create a new mm_struct and populate it with a temporary stack 376 * vm_area_struct. We don't have enough context at this point to set the stack 377 * flags, permissions, and offset, so we use temporary values. We'll update 378 * them later in setup_arg_pages(). 379 */ 380 static int bprm_mm_init(struct linux_binprm *bprm) 381 { 382 int err; 383 struct mm_struct *mm = NULL; 384 385 bprm->mm = mm = mm_alloc(); 386 err = -ENOMEM; 387 if (!mm) 388 goto err; 389 390 /* Save current stack limit for all calculations made during exec. */ 391 task_lock(current->group_leader); 392 bprm->rlim_stack = current->signal->rlim[RLIMIT_STACK]; 393 task_unlock(current->group_leader); 394 395 err = __bprm_mm_init(bprm); 396 if (err) 397 goto err; 398 399 return 0; 400 401 err: 402 if (mm) { 403 bprm->mm = NULL; 404 mmdrop(mm); 405 } 406 407 return err; 408 } 409 410 struct user_arg_ptr { 411 #ifdef CONFIG_COMPAT 412 bool is_compat; 413 #endif 414 union { 415 const char __user *const __user *native; 416 #ifdef CONFIG_COMPAT 417 const compat_uptr_t __user *compat; 418 #endif 419 } ptr; 420 }; 421 422 static const char __user *get_user_arg_ptr(struct user_arg_ptr argv, int nr) 423 { 424 const char __user *native; 425 426 #ifdef CONFIG_COMPAT 427 if (unlikely(argv.is_compat)) { 428 compat_uptr_t compat; 429 430 if (get_user(compat, argv.ptr.compat + nr)) 431 return ERR_PTR(-EFAULT); 432 433 return compat_ptr(compat); 434 } 435 #endif 436 437 if (get_user(native, argv.ptr.native + nr)) 438 return ERR_PTR(-EFAULT); 439 440 return native; 441 } 442 443 /* 444 * count() counts the number of strings in array ARGV. 445 */ 446 static int count(struct user_arg_ptr argv, int max) 447 { 448 int i = 0; 449 450 if (argv.ptr.native != NULL) { 451 for (;;) { 452 const char __user *p = get_user_arg_ptr(argv, i); 453 454 if (!p) 455 break; 456 457 if (IS_ERR(p)) 458 return -EFAULT; 459 460 if (i >= max) 461 return -E2BIG; 462 ++i; 463 464 if (fatal_signal_pending(current)) 465 return -ERESTARTNOHAND; 466 cond_resched(); 467 } 468 } 469 return i; 470 } 471 472 static int count_strings_kernel(const char *const *argv) 473 { 474 int i; 475 476 if (!argv) 477 return 0; 478 479 for (i = 0; argv[i]; ++i) { 480 if (i >= MAX_ARG_STRINGS) 481 return -E2BIG; 482 if (fatal_signal_pending(current)) 483 return -ERESTARTNOHAND; 484 cond_resched(); 485 } 486 return i; 487 } 488 489 static int bprm_stack_limits(struct linux_binprm *bprm) 490 { 491 unsigned long limit, ptr_size; 492 493 /* 494 * Limit to 1/4 of the max stack size or 3/4 of _STK_LIM 495 * (whichever is smaller) for the argv+env strings. 496 * This ensures that: 497 * - the remaining binfmt code will not run out of stack space, 498 * - the program will have a reasonable amount of stack left 499 * to work from. 500 */ 501 limit = _STK_LIM / 4 * 3; 502 limit = min(limit, bprm->rlim_stack.rlim_cur / 4); 503 /* 504 * We've historically supported up to 32 pages (ARG_MAX) 505 * of argument strings even with small stacks 506 */ 507 limit = max_t(unsigned long, limit, ARG_MAX); 508 /* 509 * We must account for the size of all the argv and envp pointers to 510 * the argv and envp strings, since they will also take up space in 511 * the stack. They aren't stored until much later when we can't 512 * signal to the parent that the child has run out of stack space. 513 * Instead, calculate it here so it's possible to fail gracefully. 514 * 515 * In the case of argc = 0, make sure there is space for adding a 516 * empty string (which will bump argc to 1), to ensure confused 517 * userspace programs don't start processing from argv[1], thinking 518 * argc can never be 0, to keep them from walking envp by accident. 519 * See do_execveat_common(). 520 */ 521 ptr_size = (max(bprm->argc, 1) + bprm->envc) * sizeof(void *); 522 if (limit <= ptr_size) 523 return -E2BIG; 524 limit -= ptr_size; 525 526 bprm->argmin = bprm->p - limit; 527 return 0; 528 } 529 530 /* 531 * 'copy_strings()' copies argument/environment strings from the old 532 * processes's memory to the new process's stack. The call to get_user_pages() 533 * ensures the destination page is created and not swapped out. 534 */ 535 static int copy_strings(int argc, struct user_arg_ptr argv, 536 struct linux_binprm *bprm) 537 { 538 struct page *kmapped_page = NULL; 539 char *kaddr = NULL; 540 unsigned long kpos = 0; 541 int ret; 542 543 while (argc-- > 0) { 544 const char __user *str; 545 int len; 546 unsigned long pos; 547 548 ret = -EFAULT; 549 str = get_user_arg_ptr(argv, argc); 550 if (IS_ERR(str)) 551 goto out; 552 553 len = strnlen_user(str, MAX_ARG_STRLEN); 554 if (!len) 555 goto out; 556 557 ret = -E2BIG; 558 if (!valid_arg_len(bprm, len)) 559 goto out; 560 561 /* We're going to work our way backwards. */ 562 pos = bprm->p; 563 str += len; 564 bprm->p -= len; 565 #ifdef CONFIG_MMU 566 if (bprm->p < bprm->argmin) 567 goto out; 568 #endif 569 570 while (len > 0) { 571 int offset, bytes_to_copy; 572 573 if (fatal_signal_pending(current)) { 574 ret = -ERESTARTNOHAND; 575 goto out; 576 } 577 cond_resched(); 578 579 offset = pos % PAGE_SIZE; 580 if (offset == 0) 581 offset = PAGE_SIZE; 582 583 bytes_to_copy = offset; 584 if (bytes_to_copy > len) 585 bytes_to_copy = len; 586 587 offset -= bytes_to_copy; 588 pos -= bytes_to_copy; 589 str -= bytes_to_copy; 590 len -= bytes_to_copy; 591 592 if (!kmapped_page || kpos != (pos & PAGE_MASK)) { 593 struct page *page; 594 595 page = get_arg_page(bprm, pos, 1); 596 if (!page) { 597 ret = -E2BIG; 598 goto out; 599 } 600 601 if (kmapped_page) { 602 flush_dcache_page(kmapped_page); 603 kunmap_local(kaddr); 604 put_arg_page(kmapped_page); 605 } 606 kmapped_page = page; 607 kaddr = kmap_local_page(kmapped_page); 608 kpos = pos & PAGE_MASK; 609 flush_arg_page(bprm, kpos, kmapped_page); 610 } 611 if (copy_from_user(kaddr+offset, str, bytes_to_copy)) { 612 ret = -EFAULT; 613 goto out; 614 } 615 } 616 } 617 ret = 0; 618 out: 619 if (kmapped_page) { 620 flush_dcache_page(kmapped_page); 621 kunmap_local(kaddr); 622 put_arg_page(kmapped_page); 623 } 624 return ret; 625 } 626 627 /* 628 * Copy and argument/environment string from the kernel to the processes stack. 629 */ 630 int copy_string_kernel(const char *arg, struct linux_binprm *bprm) 631 { 632 int len = strnlen(arg, MAX_ARG_STRLEN) + 1 /* terminating NUL */; 633 unsigned long pos = bprm->p; 634 635 if (len == 0) 636 return -EFAULT; 637 if (!valid_arg_len(bprm, len)) 638 return -E2BIG; 639 640 /* We're going to work our way backwards. */ 641 arg += len; 642 bprm->p -= len; 643 if (IS_ENABLED(CONFIG_MMU) && bprm->p < bprm->argmin) 644 return -E2BIG; 645 646 while (len > 0) { 647 unsigned int bytes_to_copy = min_t(unsigned int, len, 648 min_not_zero(offset_in_page(pos), PAGE_SIZE)); 649 struct page *page; 650 651 pos -= bytes_to_copy; 652 arg -= bytes_to_copy; 653 len -= bytes_to_copy; 654 655 page = get_arg_page(bprm, pos, 1); 656 if (!page) 657 return -E2BIG; 658 flush_arg_page(bprm, pos & PAGE_MASK, page); 659 memcpy_to_page(page, offset_in_page(pos), arg, bytes_to_copy); 660 put_arg_page(page); 661 } 662 663 return 0; 664 } 665 EXPORT_SYMBOL(copy_string_kernel); 666 667 static int copy_strings_kernel(int argc, const char *const *argv, 668 struct linux_binprm *bprm) 669 { 670 while (argc-- > 0) { 671 int ret = copy_string_kernel(argv[argc], bprm); 672 if (ret < 0) 673 return ret; 674 if (fatal_signal_pending(current)) 675 return -ERESTARTNOHAND; 676 cond_resched(); 677 } 678 return 0; 679 } 680 681 #ifdef CONFIG_MMU 682 683 /* 684 * During bprm_mm_init(), we create a temporary stack at STACK_TOP_MAX. Once 685 * the binfmt code determines where the new stack should reside, we shift it to 686 * its final location. The process proceeds as follows: 687 * 688 * 1) Use shift to calculate the new vma endpoints. 689 * 2) Extend vma to cover both the old and new ranges. This ensures the 690 * arguments passed to subsequent functions are consistent. 691 * 3) Move vma's page tables to the new range. 692 * 4) Free up any cleared pgd range. 693 * 5) Shrink the vma to cover only the new range. 694 */ 695 static int shift_arg_pages(struct vm_area_struct *vma, unsigned long shift) 696 { 697 struct mm_struct *mm = vma->vm_mm; 698 unsigned long old_start = vma->vm_start; 699 unsigned long old_end = vma->vm_end; 700 unsigned long length = old_end - old_start; 701 unsigned long new_start = old_start - shift; 702 unsigned long new_end = old_end - shift; 703 VMA_ITERATOR(vmi, mm, new_start); 704 struct vm_area_struct *next; 705 struct mmu_gather tlb; 706 707 BUG_ON(new_start > new_end); 708 709 /* 710 * ensure there are no vmas between where we want to go 711 * and where we are 712 */ 713 if (vma != vma_next(&vmi)) 714 return -EFAULT; 715 716 vma_iter_prev_range(&vmi); 717 /* 718 * cover the whole range: [new_start, old_end) 719 */ 720 if (vma_expand(&vmi, vma, new_start, old_end, vma->vm_pgoff, NULL)) 721 return -ENOMEM; 722 723 /* 724 * move the page tables downwards, on failure we rely on 725 * process cleanup to remove whatever mess we made. 726 */ 727 if (length != move_page_tables(vma, old_start, 728 vma, new_start, length, false, true)) 729 return -ENOMEM; 730 731 lru_add_drain(); 732 tlb_gather_mmu(&tlb, mm); 733 next = vma_next(&vmi); 734 if (new_end > old_start) { 735 /* 736 * when the old and new regions overlap clear from new_end. 737 */ 738 free_pgd_range(&tlb, new_end, old_end, new_end, 739 next ? next->vm_start : USER_PGTABLES_CEILING); 740 } else { 741 /* 742 * otherwise, clean from old_start; this is done to not touch 743 * the address space in [new_end, old_start) some architectures 744 * have constraints on va-space that make this illegal (IA64) - 745 * for the others its just a little faster. 746 */ 747 free_pgd_range(&tlb, old_start, old_end, new_end, 748 next ? next->vm_start : USER_PGTABLES_CEILING); 749 } 750 tlb_finish_mmu(&tlb); 751 752 vma_prev(&vmi); 753 /* Shrink the vma to just the new range */ 754 return vma_shrink(&vmi, vma, new_start, new_end, vma->vm_pgoff); 755 } 756 757 /* 758 * Finalizes the stack vm_area_struct. The flags and permissions are updated, 759 * the stack is optionally relocated, and some extra space is added. 760 */ 761 int setup_arg_pages(struct linux_binprm *bprm, 762 unsigned long stack_top, 763 int executable_stack) 764 { 765 unsigned long ret; 766 unsigned long stack_shift; 767 struct mm_struct *mm = current->mm; 768 struct vm_area_struct *vma = bprm->vma; 769 struct vm_area_struct *prev = NULL; 770 unsigned long vm_flags; 771 unsigned long stack_base; 772 unsigned long stack_size; 773 unsigned long stack_expand; 774 unsigned long rlim_stack; 775 struct mmu_gather tlb; 776 struct vma_iterator vmi; 777 778 #ifdef CONFIG_STACK_GROWSUP 779 /* Limit stack size */ 780 stack_base = bprm->rlim_stack.rlim_max; 781 782 stack_base = calc_max_stack_size(stack_base); 783 784 /* Add space for stack randomization. */ 785 stack_base += (STACK_RND_MASK << PAGE_SHIFT); 786 787 /* Make sure we didn't let the argument array grow too large. */ 788 if (vma->vm_end - vma->vm_start > stack_base) 789 return -ENOMEM; 790 791 stack_base = PAGE_ALIGN(stack_top - stack_base); 792 793 stack_shift = vma->vm_start - stack_base; 794 mm->arg_start = bprm->p - stack_shift; 795 bprm->p = vma->vm_end - stack_shift; 796 #else 797 stack_top = arch_align_stack(stack_top); 798 stack_top = PAGE_ALIGN(stack_top); 799 800 if (unlikely(stack_top < mmap_min_addr) || 801 unlikely(vma->vm_end - vma->vm_start >= stack_top - mmap_min_addr)) 802 return -ENOMEM; 803 804 stack_shift = vma->vm_end - stack_top; 805 806 bprm->p -= stack_shift; 807 mm->arg_start = bprm->p; 808 #endif 809 810 if (bprm->loader) 811 bprm->loader -= stack_shift; 812 bprm->exec -= stack_shift; 813 814 if (mmap_write_lock_killable(mm)) 815 return -EINTR; 816 817 vm_flags = VM_STACK_FLAGS; 818 819 /* 820 * Adjust stack execute permissions; explicitly enable for 821 * EXSTACK_ENABLE_X, disable for EXSTACK_DISABLE_X and leave alone 822 * (arch default) otherwise. 823 */ 824 if (unlikely(executable_stack == EXSTACK_ENABLE_X)) 825 vm_flags |= VM_EXEC; 826 else if (executable_stack == EXSTACK_DISABLE_X) 827 vm_flags &= ~VM_EXEC; 828 vm_flags |= mm->def_flags; 829 vm_flags |= VM_STACK_INCOMPLETE_SETUP; 830 831 vma_iter_init(&vmi, mm, vma->vm_start); 832 833 tlb_gather_mmu(&tlb, mm); 834 ret = mprotect_fixup(&vmi, &tlb, vma, &prev, vma->vm_start, vma->vm_end, 835 vm_flags); 836 tlb_finish_mmu(&tlb); 837 838 if (ret) 839 goto out_unlock; 840 BUG_ON(prev != vma); 841 842 if (unlikely(vm_flags & VM_EXEC)) { 843 pr_warn_once("process '%pD4' started with executable stack\n", 844 bprm->file); 845 } 846 847 /* Move stack pages down in memory. */ 848 if (stack_shift) { 849 ret = shift_arg_pages(vma, stack_shift); 850 if (ret) 851 goto out_unlock; 852 } 853 854 /* mprotect_fixup is overkill to remove the temporary stack flags */ 855 vm_flags_clear(vma, VM_STACK_INCOMPLETE_SETUP); 856 857 stack_expand = 131072UL; /* randomly 32*4k (or 2*64k) pages */ 858 stack_size = vma->vm_end - vma->vm_start; 859 /* 860 * Align this down to a page boundary as expand_stack 861 * will align it up. 862 */ 863 rlim_stack = bprm->rlim_stack.rlim_cur & PAGE_MASK; 864 865 stack_expand = min(rlim_stack, stack_size + stack_expand); 866 867 #ifdef CONFIG_STACK_GROWSUP 868 stack_base = vma->vm_start + stack_expand; 869 #else 870 stack_base = vma->vm_end - stack_expand; 871 #endif 872 current->mm->start_stack = bprm->p; 873 ret = expand_stack_locked(vma, stack_base); 874 if (ret) 875 ret = -EFAULT; 876 877 out_unlock: 878 mmap_write_unlock(mm); 879 return ret; 880 } 881 EXPORT_SYMBOL(setup_arg_pages); 882 883 #else 884 885 /* 886 * Transfer the program arguments and environment from the holding pages 887 * onto the stack. The provided stack pointer is adjusted accordingly. 888 */ 889 int transfer_args_to_stack(struct linux_binprm *bprm, 890 unsigned long *sp_location) 891 { 892 unsigned long index, stop, sp; 893 int ret = 0; 894 895 stop = bprm->p >> PAGE_SHIFT; 896 sp = *sp_location; 897 898 for (index = MAX_ARG_PAGES - 1; index >= stop; index--) { 899 unsigned int offset = index == stop ? bprm->p & ~PAGE_MASK : 0; 900 char *src = kmap_local_page(bprm->page[index]) + offset; 901 sp -= PAGE_SIZE - offset; 902 if (copy_to_user((void *) sp, src, PAGE_SIZE - offset) != 0) 903 ret = -EFAULT; 904 kunmap_local(src); 905 if (ret) 906 goto out; 907 } 908 909 bprm->exec += *sp_location - MAX_ARG_PAGES * PAGE_SIZE; 910 *sp_location = sp; 911 912 out: 913 return ret; 914 } 915 EXPORT_SYMBOL(transfer_args_to_stack); 916 917 #endif /* CONFIG_MMU */ 918 919 /* 920 * On success, caller must call do_close_execat() on the returned 921 * struct file to close it. 922 */ 923 static struct file *do_open_execat(int fd, struct filename *name, int flags) 924 { 925 struct file *file; 926 int err; 927 struct open_flags open_exec_flags = { 928 .open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC, 929 .acc_mode = MAY_EXEC, 930 .intent = LOOKUP_OPEN, 931 .lookup_flags = LOOKUP_FOLLOW, 932 }; 933 934 if ((flags & ~(AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH)) != 0) 935 return ERR_PTR(-EINVAL); 936 if (flags & AT_SYMLINK_NOFOLLOW) 937 open_exec_flags.lookup_flags &= ~LOOKUP_FOLLOW; 938 if (flags & AT_EMPTY_PATH) 939 open_exec_flags.lookup_flags |= LOOKUP_EMPTY; 940 941 file = do_filp_open(fd, name, &open_exec_flags); 942 if (IS_ERR(file)) 943 goto out; 944 945 /* 946 * may_open() has already checked for this, so it should be 947 * impossible to trip now. But we need to be extra cautious 948 * and check again at the very end too. 949 */ 950 err = -EACCES; 951 if (WARN_ON_ONCE(!S_ISREG(file_inode(file)->i_mode) || 952 path_noexec(&file->f_path))) 953 goto exit; 954 955 out: 956 return file; 957 958 exit: 959 fput(file); 960 return ERR_PTR(err); 961 } 962 963 /** 964 * open_exec - Open a path name for execution 965 * 966 * @name: path name to open with the intent of executing it. 967 * 968 * Returns ERR_PTR on failure or allocated struct file on success. 969 * 970 * As this is a wrapper for the internal do_open_execat(). Also see 971 * do_close_execat(). 972 */ 973 struct file *open_exec(const char *name) 974 { 975 struct filename *filename = getname_kernel(name); 976 struct file *f = ERR_CAST(filename); 977 978 if (!IS_ERR(filename)) { 979 f = do_open_execat(AT_FDCWD, filename, 0); 980 putname(filename); 981 } 982 return f; 983 } 984 EXPORT_SYMBOL(open_exec); 985 986 #if defined(CONFIG_BINFMT_FLAT) || defined(CONFIG_BINFMT_ELF_FDPIC) 987 ssize_t read_code(struct file *file, unsigned long addr, loff_t pos, size_t len) 988 { 989 ssize_t res = vfs_read(file, (void __user *)addr, len, &pos); 990 if (res > 0) 991 flush_icache_user_range(addr, addr + len); 992 return res; 993 } 994 EXPORT_SYMBOL(read_code); 995 #endif 996 997 /* 998 * Maps the mm_struct mm into the current task struct. 999 * On success, this function returns with exec_update_lock 1000 * held for writing. 1001 */ 1002 static int exec_mmap(struct mm_struct *mm) 1003 { 1004 struct task_struct *tsk; 1005 struct mm_struct *old_mm, *active_mm; 1006 int ret; 1007 1008 /* Notify parent that we're no longer interested in the old VM */ 1009 tsk = current; 1010 old_mm = current->mm; 1011 exec_mm_release(tsk, old_mm); 1012 1013 ret = down_write_killable(&tsk->signal->exec_update_lock); 1014 if (ret) 1015 return ret; 1016 1017 if (old_mm) { 1018 /* 1019 * If there is a pending fatal signal perhaps a signal 1020 * whose default action is to create a coredump get 1021 * out and die instead of going through with the exec. 1022 */ 1023 ret = mmap_read_lock_killable(old_mm); 1024 if (ret) { 1025 up_write(&tsk->signal->exec_update_lock); 1026 return ret; 1027 } 1028 } 1029 1030 task_lock(tsk); 1031 membarrier_exec_mmap(mm); 1032 1033 local_irq_disable(); 1034 active_mm = tsk->active_mm; 1035 tsk->active_mm = mm; 1036 tsk->mm = mm; 1037 mm_init_cid(mm); 1038 /* 1039 * This prevents preemption while active_mm is being loaded and 1040 * it and mm are being updated, which could cause problems for 1041 * lazy tlb mm refcounting when these are updated by context 1042 * switches. Not all architectures can handle irqs off over 1043 * activate_mm yet. 1044 */ 1045 if (!IS_ENABLED(CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM)) 1046 local_irq_enable(); 1047 activate_mm(active_mm, mm); 1048 if (IS_ENABLED(CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM)) 1049 local_irq_enable(); 1050 lru_gen_add_mm(mm); 1051 task_unlock(tsk); 1052 lru_gen_use_mm(mm); 1053 if (old_mm) { 1054 mmap_read_unlock(old_mm); 1055 BUG_ON(active_mm != old_mm); 1056 setmax_mm_hiwater_rss(&tsk->signal->maxrss, old_mm); 1057 mm_update_next_owner(old_mm); 1058 mmput(old_mm); 1059 return 0; 1060 } 1061 mmdrop_lazy_tlb(active_mm); 1062 return 0; 1063 } 1064 1065 static int de_thread(struct task_struct *tsk) 1066 { 1067 struct signal_struct *sig = tsk->signal; 1068 struct sighand_struct *oldsighand = tsk->sighand; 1069 spinlock_t *lock = &oldsighand->siglock; 1070 1071 if (thread_group_empty(tsk)) 1072 goto no_thread_group; 1073 1074 /* 1075 * Kill all other threads in the thread group. 1076 */ 1077 spin_lock_irq(lock); 1078 if ((sig->flags & SIGNAL_GROUP_EXIT) || sig->group_exec_task) { 1079 /* 1080 * Another group action in progress, just 1081 * return so that the signal is processed. 1082 */ 1083 spin_unlock_irq(lock); 1084 return -EAGAIN; 1085 } 1086 1087 sig->group_exec_task = tsk; 1088 sig->notify_count = zap_other_threads(tsk); 1089 if (!thread_group_leader(tsk)) 1090 sig->notify_count--; 1091 1092 while (sig->notify_count) { 1093 __set_current_state(TASK_KILLABLE); 1094 spin_unlock_irq(lock); 1095 schedule(); 1096 if (__fatal_signal_pending(tsk)) 1097 goto killed; 1098 spin_lock_irq(lock); 1099 } 1100 spin_unlock_irq(lock); 1101 1102 /* 1103 * At this point all other threads have exited, all we have to 1104 * do is to wait for the thread group leader to become inactive, 1105 * and to assume its PID: 1106 */ 1107 if (!thread_group_leader(tsk)) { 1108 struct task_struct *leader = tsk->group_leader; 1109 1110 for (;;) { 1111 cgroup_threadgroup_change_begin(tsk); 1112 write_lock_irq(&tasklist_lock); 1113 /* 1114 * Do this under tasklist_lock to ensure that 1115 * exit_notify() can't miss ->group_exec_task 1116 */ 1117 sig->notify_count = -1; 1118 if (likely(leader->exit_state)) 1119 break; 1120 __set_current_state(TASK_KILLABLE); 1121 write_unlock_irq(&tasklist_lock); 1122 cgroup_threadgroup_change_end(tsk); 1123 schedule(); 1124 if (__fatal_signal_pending(tsk)) 1125 goto killed; 1126 } 1127 1128 /* 1129 * The only record we have of the real-time age of a 1130 * process, regardless of execs it's done, is start_time. 1131 * All the past CPU time is accumulated in signal_struct 1132 * from sister threads now dead. But in this non-leader 1133 * exec, nothing survives from the original leader thread, 1134 * whose birth marks the true age of this process now. 1135 * When we take on its identity by switching to its PID, we 1136 * also take its birthdate (always earlier than our own). 1137 */ 1138 tsk->start_time = leader->start_time; 1139 tsk->start_boottime = leader->start_boottime; 1140 1141 BUG_ON(!same_thread_group(leader, tsk)); 1142 /* 1143 * An exec() starts a new thread group with the 1144 * TGID of the previous thread group. Rehash the 1145 * two threads with a switched PID, and release 1146 * the former thread group leader: 1147 */ 1148 1149 /* Become a process group leader with the old leader's pid. 1150 * The old leader becomes a thread of the this thread group. 1151 */ 1152 exchange_tids(tsk, leader); 1153 transfer_pid(leader, tsk, PIDTYPE_TGID); 1154 transfer_pid(leader, tsk, PIDTYPE_PGID); 1155 transfer_pid(leader, tsk, PIDTYPE_SID); 1156 1157 list_replace_rcu(&leader->tasks, &tsk->tasks); 1158 list_replace_init(&leader->sibling, &tsk->sibling); 1159 1160 tsk->group_leader = tsk; 1161 leader->group_leader = tsk; 1162 1163 tsk->exit_signal = SIGCHLD; 1164 leader->exit_signal = -1; 1165 1166 BUG_ON(leader->exit_state != EXIT_ZOMBIE); 1167 leader->exit_state = EXIT_DEAD; 1168 /* 1169 * We are going to release_task()->ptrace_unlink() silently, 1170 * the tracer can sleep in do_wait(). EXIT_DEAD guarantees 1171 * the tracer won't block again waiting for this thread. 1172 */ 1173 if (unlikely(leader->ptrace)) 1174 __wake_up_parent(leader, leader->parent); 1175 write_unlock_irq(&tasklist_lock); 1176 cgroup_threadgroup_change_end(tsk); 1177 1178 release_task(leader); 1179 } 1180 1181 sig->group_exec_task = NULL; 1182 sig->notify_count = 0; 1183 1184 no_thread_group: 1185 /* we have changed execution domain */ 1186 tsk->exit_signal = SIGCHLD; 1187 1188 BUG_ON(!thread_group_leader(tsk)); 1189 return 0; 1190 1191 killed: 1192 /* protects against exit_notify() and __exit_signal() */ 1193 read_lock(&tasklist_lock); 1194 sig->group_exec_task = NULL; 1195 sig->notify_count = 0; 1196 read_unlock(&tasklist_lock); 1197 return -EAGAIN; 1198 } 1199 1200 1201 /* 1202 * This function makes sure the current process has its own signal table, 1203 * so that flush_signal_handlers can later reset the handlers without 1204 * disturbing other processes. (Other processes might share the signal 1205 * table via the CLONE_SIGHAND option to clone().) 1206 */ 1207 static int unshare_sighand(struct task_struct *me) 1208 { 1209 struct sighand_struct *oldsighand = me->sighand; 1210 1211 if (refcount_read(&oldsighand->count) != 1) { 1212 struct sighand_struct *newsighand; 1213 /* 1214 * This ->sighand is shared with the CLONE_SIGHAND 1215 * but not CLONE_THREAD task, switch to the new one. 1216 */ 1217 newsighand = kmem_cache_alloc(sighand_cachep, GFP_KERNEL); 1218 if (!newsighand) 1219 return -ENOMEM; 1220 1221 refcount_set(&newsighand->count, 1); 1222 1223 write_lock_irq(&tasklist_lock); 1224 spin_lock(&oldsighand->siglock); 1225 memcpy(newsighand->action, oldsighand->action, 1226 sizeof(newsighand->action)); 1227 rcu_assign_pointer(me->sighand, newsighand); 1228 spin_unlock(&oldsighand->siglock); 1229 write_unlock_irq(&tasklist_lock); 1230 1231 __cleanup_sighand(oldsighand); 1232 } 1233 return 0; 1234 } 1235 1236 char *__get_task_comm(char *buf, size_t buf_size, struct task_struct *tsk) 1237 { 1238 task_lock(tsk); 1239 /* Always NUL terminated and zero-padded */ 1240 strscpy_pad(buf, tsk->comm, buf_size); 1241 task_unlock(tsk); 1242 return buf; 1243 } 1244 EXPORT_SYMBOL_GPL(__get_task_comm); 1245 1246 /* 1247 * These functions flushes out all traces of the currently running executable 1248 * so that a new one can be started 1249 */ 1250 1251 void __set_task_comm(struct task_struct *tsk, const char *buf, bool exec) 1252 { 1253 task_lock(tsk); 1254 trace_task_rename(tsk, buf); 1255 strscpy_pad(tsk->comm, buf, sizeof(tsk->comm)); 1256 task_unlock(tsk); 1257 perf_event_comm(tsk, exec); 1258 } 1259 1260 /* 1261 * Calling this is the point of no return. None of the failures will be 1262 * seen by userspace since either the process is already taking a fatal 1263 * signal (via de_thread() or coredump), or will have SEGV raised 1264 * (after exec_mmap()) by search_binary_handler (see below). 1265 */ 1266 int begin_new_exec(struct linux_binprm * bprm) 1267 { 1268 struct task_struct *me = current; 1269 int retval; 1270 1271 /* Once we are committed compute the creds */ 1272 retval = bprm_creds_from_file(bprm); 1273 if (retval) 1274 return retval; 1275 1276 /* 1277 * This tracepoint marks the point before flushing the old exec where 1278 * the current task is still unchanged, but errors are fatal (point of 1279 * no return). The later "sched_process_exec" tracepoint is called after 1280 * the current task has successfully switched to the new exec. 1281 */ 1282 trace_sched_prepare_exec(current, bprm); 1283 1284 /* 1285 * Ensure all future errors are fatal. 1286 */ 1287 bprm->point_of_no_return = true; 1288 1289 /* 1290 * Make this the only thread in the thread group. 1291 */ 1292 retval = de_thread(me); 1293 if (retval) 1294 goto out; 1295 1296 /* 1297 * Cancel any io_uring activity across execve 1298 */ 1299 io_uring_task_cancel(); 1300 1301 /* Ensure the files table is not shared. */ 1302 retval = unshare_files(); 1303 if (retval) 1304 goto out; 1305 1306 /* 1307 * Must be called _before_ exec_mmap() as bprm->mm is 1308 * not visible until then. Doing it here also ensures 1309 * we don't race against replace_mm_exe_file(). 1310 */ 1311 retval = set_mm_exe_file(bprm->mm, bprm->file); 1312 if (retval) 1313 goto out; 1314 1315 /* If the binary is not readable then enforce mm->dumpable=0 */ 1316 would_dump(bprm, bprm->file); 1317 if (bprm->have_execfd) 1318 would_dump(bprm, bprm->executable); 1319 1320 /* 1321 * Release all of the old mmap stuff 1322 */ 1323 acct_arg_size(bprm, 0); 1324 retval = exec_mmap(bprm->mm); 1325 if (retval) 1326 goto out; 1327 1328 bprm->mm = NULL; 1329 1330 retval = exec_task_namespaces(); 1331 if (retval) 1332 goto out_unlock; 1333 1334 #ifdef CONFIG_POSIX_TIMERS 1335 spin_lock_irq(&me->sighand->siglock); 1336 posix_cpu_timers_exit(me); 1337 spin_unlock_irq(&me->sighand->siglock); 1338 exit_itimers(me); 1339 flush_itimer_signals(); 1340 #endif 1341 1342 /* 1343 * Make the signal table private. 1344 */ 1345 retval = unshare_sighand(me); 1346 if (retval) 1347 goto out_unlock; 1348 1349 me->flags &= ~(PF_RANDOMIZE | PF_FORKNOEXEC | 1350 PF_NOFREEZE | PF_NO_SETAFFINITY); 1351 flush_thread(); 1352 me->personality &= ~bprm->per_clear; 1353 1354 clear_syscall_work_syscall_user_dispatch(me); 1355 1356 /* 1357 * We have to apply CLOEXEC before we change whether the process is 1358 * dumpable (in setup_new_exec) to avoid a race with a process in userspace 1359 * trying to access the should-be-closed file descriptors of a process 1360 * undergoing exec(2). 1361 */ 1362 do_close_on_exec(me->files); 1363 1364 if (bprm->secureexec) { 1365 /* Make sure parent cannot signal privileged process. */ 1366 me->pdeath_signal = 0; 1367 1368 /* 1369 * For secureexec, reset the stack limit to sane default to 1370 * avoid bad behavior from the prior rlimits. This has to 1371 * happen before arch_pick_mmap_layout(), which examines 1372 * RLIMIT_STACK, but after the point of no return to avoid 1373 * needing to clean up the change on failure. 1374 */ 1375 if (bprm->rlim_stack.rlim_cur > _STK_LIM) 1376 bprm->rlim_stack.rlim_cur = _STK_LIM; 1377 } 1378 1379 me->sas_ss_sp = me->sas_ss_size = 0; 1380 1381 /* 1382 * Figure out dumpability. Note that this checking only of current 1383 * is wrong, but userspace depends on it. This should be testing 1384 * bprm->secureexec instead. 1385 */ 1386 if (bprm->interp_flags & BINPRM_FLAGS_ENFORCE_NONDUMP || 1387 !(uid_eq(current_euid(), current_uid()) && 1388 gid_eq(current_egid(), current_gid()))) 1389 set_dumpable(current->mm, suid_dumpable); 1390 else 1391 set_dumpable(current->mm, SUID_DUMP_USER); 1392 1393 perf_event_exec(); 1394 __set_task_comm(me, kbasename(bprm->filename), true); 1395 1396 /* An exec changes our domain. We are no longer part of the thread 1397 group */ 1398 WRITE_ONCE(me->self_exec_id, me->self_exec_id + 1); 1399 flush_signal_handlers(me, 0); 1400 1401 retval = set_cred_ucounts(bprm->cred); 1402 if (retval < 0) 1403 goto out_unlock; 1404 1405 /* 1406 * install the new credentials for this executable 1407 */ 1408 security_bprm_committing_creds(bprm); 1409 1410 commit_creds(bprm->cred); 1411 bprm->cred = NULL; 1412 1413 /* 1414 * Disable monitoring for regular users 1415 * when executing setuid binaries. Must 1416 * wait until new credentials are committed 1417 * by commit_creds() above 1418 */ 1419 if (get_dumpable(me->mm) != SUID_DUMP_USER) 1420 perf_event_exit_task(me); 1421 /* 1422 * cred_guard_mutex must be held at least to this point to prevent 1423 * ptrace_attach() from altering our determination of the task's 1424 * credentials; any time after this it may be unlocked. 1425 */ 1426 security_bprm_committed_creds(bprm); 1427 1428 /* Pass the opened binary to the interpreter. */ 1429 if (bprm->have_execfd) { 1430 retval = get_unused_fd_flags(0); 1431 if (retval < 0) 1432 goto out_unlock; 1433 fd_install(retval, bprm->executable); 1434 bprm->executable = NULL; 1435 bprm->execfd = retval; 1436 } 1437 return 0; 1438 1439 out_unlock: 1440 up_write(&me->signal->exec_update_lock); 1441 if (!bprm->cred) 1442 mutex_unlock(&me->signal->cred_guard_mutex); 1443 1444 out: 1445 return retval; 1446 } 1447 EXPORT_SYMBOL(begin_new_exec); 1448 1449 void would_dump(struct linux_binprm *bprm, struct file *file) 1450 { 1451 struct inode *inode = file_inode(file); 1452 struct mnt_idmap *idmap = file_mnt_idmap(file); 1453 if (inode_permission(idmap, inode, MAY_READ) < 0) { 1454 struct user_namespace *old, *user_ns; 1455 bprm->interp_flags |= BINPRM_FLAGS_ENFORCE_NONDUMP; 1456 1457 /* Ensure mm->user_ns contains the executable */ 1458 user_ns = old = bprm->mm->user_ns; 1459 while ((user_ns != &init_user_ns) && 1460 !privileged_wrt_inode_uidgid(user_ns, idmap, inode)) 1461 user_ns = user_ns->parent; 1462 1463 if (old != user_ns) { 1464 bprm->mm->user_ns = get_user_ns(user_ns); 1465 put_user_ns(old); 1466 } 1467 } 1468 } 1469 EXPORT_SYMBOL(would_dump); 1470 1471 void setup_new_exec(struct linux_binprm * bprm) 1472 { 1473 /* Setup things that can depend upon the personality */ 1474 struct task_struct *me = current; 1475 1476 arch_pick_mmap_layout(me->mm, &bprm->rlim_stack); 1477 1478 arch_setup_new_exec(); 1479 1480 /* Set the new mm task size. We have to do that late because it may 1481 * depend on TIF_32BIT which is only updated in flush_thread() on 1482 * some architectures like powerpc 1483 */ 1484 me->mm->task_size = TASK_SIZE; 1485 up_write(&me->signal->exec_update_lock); 1486 mutex_unlock(&me->signal->cred_guard_mutex); 1487 } 1488 EXPORT_SYMBOL(setup_new_exec); 1489 1490 /* Runs immediately before start_thread() takes over. */ 1491 void finalize_exec(struct linux_binprm *bprm) 1492 { 1493 /* Store any stack rlimit changes before starting thread. */ 1494 task_lock(current->group_leader); 1495 current->signal->rlim[RLIMIT_STACK] = bprm->rlim_stack; 1496 task_unlock(current->group_leader); 1497 } 1498 EXPORT_SYMBOL(finalize_exec); 1499 1500 /* 1501 * Prepare credentials and lock ->cred_guard_mutex. 1502 * setup_new_exec() commits the new creds and drops the lock. 1503 * Or, if exec fails before, free_bprm() should release ->cred 1504 * and unlock. 1505 */ 1506 static int prepare_bprm_creds(struct linux_binprm *bprm) 1507 { 1508 if (mutex_lock_interruptible(¤t->signal->cred_guard_mutex)) 1509 return -ERESTARTNOINTR; 1510 1511 bprm->cred = prepare_exec_creds(); 1512 if (likely(bprm->cred)) 1513 return 0; 1514 1515 mutex_unlock(¤t->signal->cred_guard_mutex); 1516 return -ENOMEM; 1517 } 1518 1519 /* Matches do_open_execat() */ 1520 static void do_close_execat(struct file *file) 1521 { 1522 if (file) 1523 fput(file); 1524 } 1525 1526 static void free_bprm(struct linux_binprm *bprm) 1527 { 1528 if (bprm->mm) { 1529 acct_arg_size(bprm, 0); 1530 mmput(bprm->mm); 1531 } 1532 free_arg_pages(bprm); 1533 if (bprm->cred) { 1534 mutex_unlock(¤t->signal->cred_guard_mutex); 1535 abort_creds(bprm->cred); 1536 } 1537 do_close_execat(bprm->file); 1538 if (bprm->executable) 1539 fput(bprm->executable); 1540 /* If a binfmt changed the interp, free it. */ 1541 if (bprm->interp != bprm->filename) 1542 kfree(bprm->interp); 1543 kfree(bprm->fdpath); 1544 kfree(bprm); 1545 } 1546 1547 static struct linux_binprm *alloc_bprm(int fd, struct filename *filename, int flags) 1548 { 1549 struct linux_binprm *bprm; 1550 struct file *file; 1551 int retval = -ENOMEM; 1552 1553 file = do_open_execat(fd, filename, flags); 1554 if (IS_ERR(file)) 1555 return ERR_CAST(file); 1556 1557 bprm = kzalloc(sizeof(*bprm), GFP_KERNEL); 1558 if (!bprm) { 1559 do_close_execat(file); 1560 return ERR_PTR(-ENOMEM); 1561 } 1562 1563 bprm->file = file; 1564 1565 if (fd == AT_FDCWD || filename->name[0] == '/') { 1566 bprm->filename = filename->name; 1567 } else { 1568 if (filename->name[0] == '\0') 1569 bprm->fdpath = kasprintf(GFP_KERNEL, "/dev/fd/%d", fd); 1570 else 1571 bprm->fdpath = kasprintf(GFP_KERNEL, "/dev/fd/%d/%s", 1572 fd, filename->name); 1573 if (!bprm->fdpath) 1574 goto out_free; 1575 1576 /* 1577 * Record that a name derived from an O_CLOEXEC fd will be 1578 * inaccessible after exec. This allows the code in exec to 1579 * choose to fail when the executable is not mmaped into the 1580 * interpreter and an open file descriptor is not passed to 1581 * the interpreter. This makes for a better user experience 1582 * than having the interpreter start and then immediately fail 1583 * when it finds the executable is inaccessible. 1584 */ 1585 if (get_close_on_exec(fd)) 1586 bprm->interp_flags |= BINPRM_FLAGS_PATH_INACCESSIBLE; 1587 1588 bprm->filename = bprm->fdpath; 1589 } 1590 bprm->interp = bprm->filename; 1591 1592 retval = bprm_mm_init(bprm); 1593 if (!retval) 1594 return bprm; 1595 1596 out_free: 1597 free_bprm(bprm); 1598 return ERR_PTR(retval); 1599 } 1600 1601 int bprm_change_interp(const char *interp, struct linux_binprm *bprm) 1602 { 1603 /* If a binfmt changed the interp, free it first. */ 1604 if (bprm->interp != bprm->filename) 1605 kfree(bprm->interp); 1606 bprm->interp = kstrdup(interp, GFP_KERNEL); 1607 if (!bprm->interp) 1608 return -ENOMEM; 1609 return 0; 1610 } 1611 EXPORT_SYMBOL(bprm_change_interp); 1612 1613 /* 1614 * determine how safe it is to execute the proposed program 1615 * - the caller must hold ->cred_guard_mutex to protect against 1616 * PTRACE_ATTACH or seccomp thread-sync 1617 */ 1618 static void check_unsafe_exec(struct linux_binprm *bprm) 1619 { 1620 struct task_struct *p = current, *t; 1621 unsigned n_fs; 1622 1623 if (p->ptrace) 1624 bprm->unsafe |= LSM_UNSAFE_PTRACE; 1625 1626 /* 1627 * This isn't strictly necessary, but it makes it harder for LSMs to 1628 * mess up. 1629 */ 1630 if (task_no_new_privs(current)) 1631 bprm->unsafe |= LSM_UNSAFE_NO_NEW_PRIVS; 1632 1633 /* 1634 * If another task is sharing our fs, we cannot safely 1635 * suid exec because the differently privileged task 1636 * will be able to manipulate the current directory, etc. 1637 * It would be nice to force an unshare instead... 1638 */ 1639 n_fs = 1; 1640 spin_lock(&p->fs->lock); 1641 rcu_read_lock(); 1642 for_other_threads(p, t) { 1643 if (t->fs == p->fs) 1644 n_fs++; 1645 } 1646 rcu_read_unlock(); 1647 1648 /* "users" and "in_exec" locked for copy_fs() */ 1649 if (p->fs->users > n_fs) 1650 bprm->unsafe |= LSM_UNSAFE_SHARE; 1651 else 1652 p->fs->in_exec = 1; 1653 spin_unlock(&p->fs->lock); 1654 } 1655 1656 static void bprm_fill_uid(struct linux_binprm *bprm, struct file *file) 1657 { 1658 /* Handle suid and sgid on files */ 1659 struct mnt_idmap *idmap; 1660 struct inode *inode = file_inode(file); 1661 unsigned int mode; 1662 vfsuid_t vfsuid; 1663 vfsgid_t vfsgid; 1664 1665 if (!mnt_may_suid(file->f_path.mnt)) 1666 return; 1667 1668 if (task_no_new_privs(current)) 1669 return; 1670 1671 mode = READ_ONCE(inode->i_mode); 1672 if (!(mode & (S_ISUID|S_ISGID))) 1673 return; 1674 1675 idmap = file_mnt_idmap(file); 1676 1677 /* Be careful if suid/sgid is set */ 1678 inode_lock(inode); 1679 1680 /* reload atomically mode/uid/gid now that lock held */ 1681 mode = inode->i_mode; 1682 vfsuid = i_uid_into_vfsuid(idmap, inode); 1683 vfsgid = i_gid_into_vfsgid(idmap, inode); 1684 inode_unlock(inode); 1685 1686 /* We ignore suid/sgid if there are no mappings for them in the ns */ 1687 if (!vfsuid_has_mapping(bprm->cred->user_ns, vfsuid) || 1688 !vfsgid_has_mapping(bprm->cred->user_ns, vfsgid)) 1689 return; 1690 1691 if (mode & S_ISUID) { 1692 bprm->per_clear |= PER_CLEAR_ON_SETID; 1693 bprm->cred->euid = vfsuid_into_kuid(vfsuid); 1694 } 1695 1696 if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) { 1697 bprm->per_clear |= PER_CLEAR_ON_SETID; 1698 bprm->cred->egid = vfsgid_into_kgid(vfsgid); 1699 } 1700 } 1701 1702 /* 1703 * Compute brpm->cred based upon the final binary. 1704 */ 1705 static int bprm_creds_from_file(struct linux_binprm *bprm) 1706 { 1707 /* Compute creds based on which file? */ 1708 struct file *file = bprm->execfd_creds ? bprm->executable : bprm->file; 1709 1710 bprm_fill_uid(bprm, file); 1711 return security_bprm_creds_from_file(bprm, file); 1712 } 1713 1714 /* 1715 * Fill the binprm structure from the inode. 1716 * Read the first BINPRM_BUF_SIZE bytes 1717 * 1718 * This may be called multiple times for binary chains (scripts for example). 1719 */ 1720 static int prepare_binprm(struct linux_binprm *bprm) 1721 { 1722 loff_t pos = 0; 1723 1724 memset(bprm->buf, 0, BINPRM_BUF_SIZE); 1725 return kernel_read(bprm->file, bprm->buf, BINPRM_BUF_SIZE, &pos); 1726 } 1727 1728 /* 1729 * Arguments are '\0' separated strings found at the location bprm->p 1730 * points to; chop off the first by relocating brpm->p to right after 1731 * the first '\0' encountered. 1732 */ 1733 int remove_arg_zero(struct linux_binprm *bprm) 1734 { 1735 unsigned long offset; 1736 char *kaddr; 1737 struct page *page; 1738 1739 if (!bprm->argc) 1740 return 0; 1741 1742 do { 1743 offset = bprm->p & ~PAGE_MASK; 1744 page = get_arg_page(bprm, bprm->p, 0); 1745 if (!page) 1746 return -EFAULT; 1747 kaddr = kmap_local_page(page); 1748 1749 for (; offset < PAGE_SIZE && kaddr[offset]; 1750 offset++, bprm->p++) 1751 ; 1752 1753 kunmap_local(kaddr); 1754 put_arg_page(page); 1755 } while (offset == PAGE_SIZE); 1756 1757 bprm->p++; 1758 bprm->argc--; 1759 1760 return 0; 1761 } 1762 EXPORT_SYMBOL(remove_arg_zero); 1763 1764 #define printable(c) (((c)=='\t') || ((c)=='\n') || (0x20<=(c) && (c)<=0x7e)) 1765 /* 1766 * cycle the list of binary formats handler, until one recognizes the image 1767 */ 1768 static int search_binary_handler(struct linux_binprm *bprm) 1769 { 1770 bool need_retry = IS_ENABLED(CONFIG_MODULES); 1771 struct linux_binfmt *fmt; 1772 int retval; 1773 1774 retval = prepare_binprm(bprm); 1775 if (retval < 0) 1776 return retval; 1777 1778 retval = security_bprm_check(bprm); 1779 if (retval) 1780 return retval; 1781 1782 retval = -ENOENT; 1783 retry: 1784 read_lock(&binfmt_lock); 1785 list_for_each_entry(fmt, &formats, lh) { 1786 if (!try_module_get(fmt->module)) 1787 continue; 1788 read_unlock(&binfmt_lock); 1789 1790 retval = fmt->load_binary(bprm); 1791 1792 read_lock(&binfmt_lock); 1793 put_binfmt(fmt); 1794 if (bprm->point_of_no_return || (retval != -ENOEXEC)) { 1795 read_unlock(&binfmt_lock); 1796 return retval; 1797 } 1798 } 1799 read_unlock(&binfmt_lock); 1800 1801 if (need_retry) { 1802 if (printable(bprm->buf[0]) && printable(bprm->buf[1]) && 1803 printable(bprm->buf[2]) && printable(bprm->buf[3])) 1804 return retval; 1805 if (request_module("binfmt-%04x", *(ushort *)(bprm->buf + 2)) < 0) 1806 return retval; 1807 need_retry = false; 1808 goto retry; 1809 } 1810 1811 return retval; 1812 } 1813 1814 /* binfmt handlers will call back into begin_new_exec() on success. */ 1815 static int exec_binprm(struct linux_binprm *bprm) 1816 { 1817 pid_t old_pid, old_vpid; 1818 int ret, depth; 1819 1820 /* Need to fetch pid before load_binary changes it */ 1821 old_pid = current->pid; 1822 rcu_read_lock(); 1823 old_vpid = task_pid_nr_ns(current, task_active_pid_ns(current->parent)); 1824 rcu_read_unlock(); 1825 1826 /* This allows 4 levels of binfmt rewrites before failing hard. */ 1827 for (depth = 0;; depth++) { 1828 struct file *exec; 1829 if (depth > 5) 1830 return -ELOOP; 1831 1832 ret = search_binary_handler(bprm); 1833 if (ret < 0) 1834 return ret; 1835 if (!bprm->interpreter) 1836 break; 1837 1838 exec = bprm->file; 1839 bprm->file = bprm->interpreter; 1840 bprm->interpreter = NULL; 1841 1842 if (unlikely(bprm->have_execfd)) { 1843 if (bprm->executable) { 1844 fput(exec); 1845 return -ENOEXEC; 1846 } 1847 bprm->executable = exec; 1848 } else 1849 fput(exec); 1850 } 1851 1852 audit_bprm(bprm); 1853 trace_sched_process_exec(current, old_pid, bprm); 1854 ptrace_event(PTRACE_EVENT_EXEC, old_vpid); 1855 proc_exec_connector(current); 1856 return 0; 1857 } 1858 1859 static int bprm_execve(struct linux_binprm *bprm) 1860 { 1861 int retval; 1862 1863 retval = prepare_bprm_creds(bprm); 1864 if (retval) 1865 return retval; 1866 1867 /* 1868 * Check for unsafe execution states before exec_binprm(), which 1869 * will call back into begin_new_exec(), into bprm_creds_from_file(), 1870 * where setuid-ness is evaluated. 1871 */ 1872 check_unsafe_exec(bprm); 1873 current->in_execve = 1; 1874 sched_mm_cid_before_execve(current); 1875 1876 sched_exec(); 1877 1878 /* Set the unchanging part of bprm->cred */ 1879 retval = security_bprm_creds_for_exec(bprm); 1880 if (retval) 1881 goto out; 1882 1883 retval = exec_binprm(bprm); 1884 if (retval < 0) 1885 goto out; 1886 1887 sched_mm_cid_after_execve(current); 1888 /* execve succeeded */ 1889 current->fs->in_exec = 0; 1890 current->in_execve = 0; 1891 rseq_execve(current); 1892 user_events_execve(current); 1893 acct_update_integrals(current); 1894 task_numa_free(current, false); 1895 return retval; 1896 1897 out: 1898 /* 1899 * If past the point of no return ensure the code never 1900 * returns to the userspace process. Use an existing fatal 1901 * signal if present otherwise terminate the process with 1902 * SIGSEGV. 1903 */ 1904 if (bprm->point_of_no_return && !fatal_signal_pending(current)) 1905 force_fatal_sig(SIGSEGV); 1906 1907 sched_mm_cid_after_execve(current); 1908 current->fs->in_exec = 0; 1909 current->in_execve = 0; 1910 1911 return retval; 1912 } 1913 1914 static int do_execveat_common(int fd, struct filename *filename, 1915 struct user_arg_ptr argv, 1916 struct user_arg_ptr envp, 1917 int flags) 1918 { 1919 struct linux_binprm *bprm; 1920 int retval; 1921 1922 if (IS_ERR(filename)) 1923 return PTR_ERR(filename); 1924 1925 /* 1926 * We move the actual failure in case of RLIMIT_NPROC excess from 1927 * set*uid() to execve() because too many poorly written programs 1928 * don't check setuid() return code. Here we additionally recheck 1929 * whether NPROC limit is still exceeded. 1930 */ 1931 if ((current->flags & PF_NPROC_EXCEEDED) && 1932 is_rlimit_overlimit(current_ucounts(), UCOUNT_RLIMIT_NPROC, rlimit(RLIMIT_NPROC))) { 1933 retval = -EAGAIN; 1934 goto out_ret; 1935 } 1936 1937 /* We're below the limit (still or again), so we don't want to make 1938 * further execve() calls fail. */ 1939 current->flags &= ~PF_NPROC_EXCEEDED; 1940 1941 bprm = alloc_bprm(fd, filename, flags); 1942 if (IS_ERR(bprm)) { 1943 retval = PTR_ERR(bprm); 1944 goto out_ret; 1945 } 1946 1947 retval = count(argv, MAX_ARG_STRINGS); 1948 if (retval == 0) 1949 pr_warn_once("process '%s' launched '%s' with NULL argv: empty string added\n", 1950 current->comm, bprm->filename); 1951 if (retval < 0) 1952 goto out_free; 1953 bprm->argc = retval; 1954 1955 retval = count(envp, MAX_ARG_STRINGS); 1956 if (retval < 0) 1957 goto out_free; 1958 bprm->envc = retval; 1959 1960 retval = bprm_stack_limits(bprm); 1961 if (retval < 0) 1962 goto out_free; 1963 1964 retval = copy_string_kernel(bprm->filename, bprm); 1965 if (retval < 0) 1966 goto out_free; 1967 bprm->exec = bprm->p; 1968 1969 retval = copy_strings(bprm->envc, envp, bprm); 1970 if (retval < 0) 1971 goto out_free; 1972 1973 retval = copy_strings(bprm->argc, argv, bprm); 1974 if (retval < 0) 1975 goto out_free; 1976 1977 /* 1978 * When argv is empty, add an empty string ("") as argv[0] to 1979 * ensure confused userspace programs that start processing 1980 * from argv[1] won't end up walking envp. See also 1981 * bprm_stack_limits(). 1982 */ 1983 if (bprm->argc == 0) { 1984 retval = copy_string_kernel("", bprm); 1985 if (retval < 0) 1986 goto out_free; 1987 bprm->argc = 1; 1988 } 1989 1990 retval = bprm_execve(bprm); 1991 out_free: 1992 free_bprm(bprm); 1993 1994 out_ret: 1995 putname(filename); 1996 return retval; 1997 } 1998 1999 int kernel_execve(const char *kernel_filename, 2000 const char *const *argv, const char *const *envp) 2001 { 2002 struct filename *filename; 2003 struct linux_binprm *bprm; 2004 int fd = AT_FDCWD; 2005 int retval; 2006 2007 /* It is non-sense for kernel threads to call execve */ 2008 if (WARN_ON_ONCE(current->flags & PF_KTHREAD)) 2009 return -EINVAL; 2010 2011 filename = getname_kernel(kernel_filename); 2012 if (IS_ERR(filename)) 2013 return PTR_ERR(filename); 2014 2015 bprm = alloc_bprm(fd, filename, 0); 2016 if (IS_ERR(bprm)) { 2017 retval = PTR_ERR(bprm); 2018 goto out_ret; 2019 } 2020 2021 retval = count_strings_kernel(argv); 2022 if (WARN_ON_ONCE(retval == 0)) 2023 retval = -EINVAL; 2024 if (retval < 0) 2025 goto out_free; 2026 bprm->argc = retval; 2027 2028 retval = count_strings_kernel(envp); 2029 if (retval < 0) 2030 goto out_free; 2031 bprm->envc = retval; 2032 2033 retval = bprm_stack_limits(bprm); 2034 if (retval < 0) 2035 goto out_free; 2036 2037 retval = copy_string_kernel(bprm->filename, bprm); 2038 if (retval < 0) 2039 goto out_free; 2040 bprm->exec = bprm->p; 2041 2042 retval = copy_strings_kernel(bprm->envc, envp, bprm); 2043 if (retval < 0) 2044 goto out_free; 2045 2046 retval = copy_strings_kernel(bprm->argc, argv, bprm); 2047 if (retval < 0) 2048 goto out_free; 2049 2050 retval = bprm_execve(bprm); 2051 out_free: 2052 free_bprm(bprm); 2053 out_ret: 2054 putname(filename); 2055 return retval; 2056 } 2057 2058 static int do_execve(struct filename *filename, 2059 const char __user *const __user *__argv, 2060 const char __user *const __user *__envp) 2061 { 2062 struct user_arg_ptr argv = { .ptr.native = __argv }; 2063 struct user_arg_ptr envp = { .ptr.native = __envp }; 2064 return do_execveat_common(AT_FDCWD, filename, argv, envp, 0); 2065 } 2066 2067 static int do_execveat(int fd, struct filename *filename, 2068 const char __user *const __user *__argv, 2069 const char __user *const __user *__envp, 2070 int flags) 2071 { 2072 struct user_arg_ptr argv = { .ptr.native = __argv }; 2073 struct user_arg_ptr envp = { .ptr.native = __envp }; 2074 2075 return do_execveat_common(fd, filename, argv, envp, flags); 2076 } 2077 2078 #ifdef CONFIG_COMPAT 2079 static int compat_do_execve(struct filename *filename, 2080 const compat_uptr_t __user *__argv, 2081 const compat_uptr_t __user *__envp) 2082 { 2083 struct user_arg_ptr argv = { 2084 .is_compat = true, 2085 .ptr.compat = __argv, 2086 }; 2087 struct user_arg_ptr envp = { 2088 .is_compat = true, 2089 .ptr.compat = __envp, 2090 }; 2091 return do_execveat_common(AT_FDCWD, filename, argv, envp, 0); 2092 } 2093 2094 static int compat_do_execveat(int fd, struct filename *filename, 2095 const compat_uptr_t __user *__argv, 2096 const compat_uptr_t __user *__envp, 2097 int flags) 2098 { 2099 struct user_arg_ptr argv = { 2100 .is_compat = true, 2101 .ptr.compat = __argv, 2102 }; 2103 struct user_arg_ptr envp = { 2104 .is_compat = true, 2105 .ptr.compat = __envp, 2106 }; 2107 return do_execveat_common(fd, filename, argv, envp, flags); 2108 } 2109 #endif 2110 2111 void set_binfmt(struct linux_binfmt *new) 2112 { 2113 struct mm_struct *mm = current->mm; 2114 2115 if (mm->binfmt) 2116 module_put(mm->binfmt->module); 2117 2118 mm->binfmt = new; 2119 if (new) 2120 __module_get(new->module); 2121 } 2122 EXPORT_SYMBOL(set_binfmt); 2123 2124 /* 2125 * set_dumpable stores three-value SUID_DUMP_* into mm->flags. 2126 */ 2127 void set_dumpable(struct mm_struct *mm, int value) 2128 { 2129 if (WARN_ON((unsigned)value > SUID_DUMP_ROOT)) 2130 return; 2131 2132 set_mask_bits(&mm->flags, MMF_DUMPABLE_MASK, value); 2133 } 2134 2135 SYSCALL_DEFINE3(execve, 2136 const char __user *, filename, 2137 const char __user *const __user *, argv, 2138 const char __user *const __user *, envp) 2139 { 2140 return do_execve(getname(filename), argv, envp); 2141 } 2142 2143 SYSCALL_DEFINE5(execveat, 2144 int, fd, const char __user *, filename, 2145 const char __user *const __user *, argv, 2146 const char __user *const __user *, envp, 2147 int, flags) 2148 { 2149 return do_execveat(fd, 2150 getname_uflags(filename, flags), 2151 argv, envp, flags); 2152 } 2153 2154 #ifdef CONFIG_COMPAT 2155 COMPAT_SYSCALL_DEFINE3(execve, const char __user *, filename, 2156 const compat_uptr_t __user *, argv, 2157 const compat_uptr_t __user *, envp) 2158 { 2159 return compat_do_execve(getname(filename), argv, envp); 2160 } 2161 2162 COMPAT_SYSCALL_DEFINE5(execveat, int, fd, 2163 const char __user *, filename, 2164 const compat_uptr_t __user *, argv, 2165 const compat_uptr_t __user *, envp, 2166 int, flags) 2167 { 2168 return compat_do_execveat(fd, 2169 getname_uflags(filename, flags), 2170 argv, envp, flags); 2171 } 2172 #endif 2173 2174 #ifdef CONFIG_SYSCTL 2175 2176 static int proc_dointvec_minmax_coredump(struct ctl_table *table, int write, 2177 void *buffer, size_t *lenp, loff_t *ppos) 2178 { 2179 int error = proc_dointvec_minmax(table, write, buffer, lenp, ppos); 2180 2181 if (!error) 2182 validate_coredump_safety(); 2183 return error; 2184 } 2185 2186 static struct ctl_table fs_exec_sysctls[] = { 2187 { 2188 .procname = "suid_dumpable", 2189 .data = &suid_dumpable, 2190 .maxlen = sizeof(int), 2191 .mode = 0644, 2192 .proc_handler = proc_dointvec_minmax_coredump, 2193 .extra1 = SYSCTL_ZERO, 2194 .extra2 = SYSCTL_TWO, 2195 }, 2196 }; 2197 2198 static int __init init_fs_exec_sysctls(void) 2199 { 2200 register_sysctl_init("fs", fs_exec_sysctls); 2201 return 0; 2202 } 2203 2204 fs_initcall(init_fs_exec_sysctls); 2205 #endif /* CONFIG_SYSCTL */ 2206