1 // SPDX-License-Identifier: GPL-2.0 2 3 #include <linux/blkdev.h> 4 #include <linux/iversion.h> 5 #include "compression.h" 6 #include "ctree.h" 7 #include "delalloc-space.h" 8 #include "reflink.h" 9 #include "transaction.h" 10 #include "subpage.h" 11 12 #define BTRFS_MAX_DEDUPE_LEN SZ_16M 13 14 static int clone_finish_inode_update(struct btrfs_trans_handle *trans, 15 struct inode *inode, 16 u64 endoff, 17 const u64 destoff, 18 const u64 olen, 19 int no_time_update) 20 { 21 struct btrfs_root *root = BTRFS_I(inode)->root; 22 int ret; 23 24 inode_inc_iversion(inode); 25 if (!no_time_update) 26 inode->i_mtime = inode->i_ctime = current_time(inode); 27 /* 28 * We round up to the block size at eof when determining which 29 * extents to clone above, but shouldn't round up the file size. 30 */ 31 if (endoff > destoff + olen) 32 endoff = destoff + olen; 33 if (endoff > inode->i_size) { 34 i_size_write(inode, endoff); 35 btrfs_inode_safe_disk_i_size_write(BTRFS_I(inode), 0); 36 } 37 38 ret = btrfs_update_inode(trans, root, BTRFS_I(inode)); 39 if (ret) { 40 btrfs_abort_transaction(trans, ret); 41 btrfs_end_transaction(trans); 42 goto out; 43 } 44 ret = btrfs_end_transaction(trans); 45 out: 46 return ret; 47 } 48 49 static int copy_inline_to_page(struct btrfs_inode *inode, 50 const u64 file_offset, 51 char *inline_data, 52 const u64 size, 53 const u64 datal, 54 const u8 comp_type) 55 { 56 struct btrfs_fs_info *fs_info = inode->root->fs_info; 57 const u32 block_size = fs_info->sectorsize; 58 const u64 range_end = file_offset + block_size - 1; 59 const size_t inline_size = size - btrfs_file_extent_calc_inline_size(0); 60 char *data_start = inline_data + btrfs_file_extent_calc_inline_size(0); 61 struct extent_changeset *data_reserved = NULL; 62 struct page *page = NULL; 63 struct address_space *mapping = inode->vfs_inode.i_mapping; 64 int ret; 65 66 ASSERT(IS_ALIGNED(file_offset, block_size)); 67 68 /* 69 * We have flushed and locked the ranges of the source and destination 70 * inodes, we also have locked the inodes, so we are safe to do a 71 * reservation here. Also we must not do the reservation while holding 72 * a transaction open, otherwise we would deadlock. 73 */ 74 ret = btrfs_delalloc_reserve_space(inode, &data_reserved, file_offset, 75 block_size); 76 if (ret) 77 goto out; 78 79 page = find_or_create_page(mapping, file_offset >> PAGE_SHIFT, 80 btrfs_alloc_write_mask(mapping)); 81 if (!page) { 82 ret = -ENOMEM; 83 goto out_unlock; 84 } 85 86 ret = set_page_extent_mapped(page); 87 if (ret < 0) 88 goto out_unlock; 89 90 clear_extent_bit(&inode->io_tree, file_offset, range_end, 91 EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING | EXTENT_DEFRAG, 92 0, 0, NULL); 93 ret = btrfs_set_extent_delalloc(inode, file_offset, range_end, 0, NULL); 94 if (ret) 95 goto out_unlock; 96 97 /* 98 * After dirtying the page our caller will need to start a transaction, 99 * and if we are low on metadata free space, that can cause flushing of 100 * delalloc for all inodes in order to get metadata space released. 101 * However we are holding the range locked for the whole duration of 102 * the clone/dedupe operation, so we may deadlock if that happens and no 103 * other task releases enough space. So mark this inode as not being 104 * possible to flush to avoid such deadlock. We will clear that flag 105 * when we finish cloning all extents, since a transaction is started 106 * after finding each extent to clone. 107 */ 108 set_bit(BTRFS_INODE_NO_DELALLOC_FLUSH, &inode->runtime_flags); 109 110 if (comp_type == BTRFS_COMPRESS_NONE) { 111 memcpy_to_page(page, offset_in_page(file_offset), data_start, 112 datal); 113 flush_dcache_page(page); 114 } else { 115 ret = btrfs_decompress(comp_type, data_start, page, 116 offset_in_page(file_offset), 117 inline_size, datal); 118 if (ret) 119 goto out_unlock; 120 flush_dcache_page(page); 121 } 122 123 /* 124 * If our inline data is smaller then the block/page size, then the 125 * remaining of the block/page is equivalent to zeroes. We had something 126 * like the following done: 127 * 128 * $ xfs_io -f -c "pwrite -S 0xab 0 500" file 129 * $ sync # (or fsync) 130 * $ xfs_io -c "falloc 0 4K" file 131 * $ xfs_io -c "pwrite -S 0xcd 4K 4K" 132 * 133 * So what's in the range [500, 4095] corresponds to zeroes. 134 */ 135 if (datal < block_size) { 136 memzero_page(page, datal, block_size - datal); 137 flush_dcache_page(page); 138 } 139 140 btrfs_page_set_uptodate(fs_info, page, file_offset, block_size); 141 btrfs_page_clear_checked(fs_info, page, file_offset, block_size); 142 btrfs_page_set_dirty(fs_info, page, file_offset, block_size); 143 out_unlock: 144 if (page) { 145 unlock_page(page); 146 put_page(page); 147 } 148 if (ret) 149 btrfs_delalloc_release_space(inode, data_reserved, file_offset, 150 block_size, true); 151 btrfs_delalloc_release_extents(inode, block_size); 152 out: 153 extent_changeset_free(data_reserved); 154 155 return ret; 156 } 157 158 /* 159 * Deal with cloning of inline extents. We try to copy the inline extent from 160 * the source inode to destination inode when possible. When not possible we 161 * copy the inline extent's data into the respective page of the inode. 162 */ 163 static int clone_copy_inline_extent(struct inode *dst, 164 struct btrfs_path *path, 165 struct btrfs_key *new_key, 166 const u64 drop_start, 167 const u64 datal, 168 const u64 size, 169 const u8 comp_type, 170 char *inline_data, 171 struct btrfs_trans_handle **trans_out) 172 { 173 struct btrfs_fs_info *fs_info = btrfs_sb(dst->i_sb); 174 struct btrfs_root *root = BTRFS_I(dst)->root; 175 const u64 aligned_end = ALIGN(new_key->offset + datal, 176 fs_info->sectorsize); 177 struct btrfs_trans_handle *trans = NULL; 178 struct btrfs_drop_extents_args drop_args = { 0 }; 179 int ret; 180 struct btrfs_key key; 181 182 if (new_key->offset > 0) { 183 ret = copy_inline_to_page(BTRFS_I(dst), new_key->offset, 184 inline_data, size, datal, comp_type); 185 goto out; 186 } 187 188 key.objectid = btrfs_ino(BTRFS_I(dst)); 189 key.type = BTRFS_EXTENT_DATA_KEY; 190 key.offset = 0; 191 ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); 192 if (ret < 0) { 193 return ret; 194 } else if (ret > 0) { 195 if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) { 196 ret = btrfs_next_leaf(root, path); 197 if (ret < 0) 198 return ret; 199 else if (ret > 0) 200 goto copy_inline_extent; 201 } 202 btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]); 203 if (key.objectid == btrfs_ino(BTRFS_I(dst)) && 204 key.type == BTRFS_EXTENT_DATA_KEY) { 205 /* 206 * There's an implicit hole at file offset 0, copy the 207 * inline extent's data to the page. 208 */ 209 ASSERT(key.offset > 0); 210 goto copy_to_page; 211 } 212 } else if (i_size_read(dst) <= datal) { 213 struct btrfs_file_extent_item *ei; 214 215 ei = btrfs_item_ptr(path->nodes[0], path->slots[0], 216 struct btrfs_file_extent_item); 217 /* 218 * If it's an inline extent replace it with the source inline 219 * extent, otherwise copy the source inline extent data into 220 * the respective page at the destination inode. 221 */ 222 if (btrfs_file_extent_type(path->nodes[0], ei) == 223 BTRFS_FILE_EXTENT_INLINE) 224 goto copy_inline_extent; 225 226 goto copy_to_page; 227 } 228 229 copy_inline_extent: 230 /* 231 * We have no extent items, or we have an extent at offset 0 which may 232 * or may not be inlined. All these cases are dealt the same way. 233 */ 234 if (i_size_read(dst) > datal) { 235 /* 236 * At the destination offset 0 we have either a hole, a regular 237 * extent or an inline extent larger then the one we want to 238 * clone. Deal with all these cases by copying the inline extent 239 * data into the respective page at the destination inode. 240 */ 241 goto copy_to_page; 242 } 243 244 /* 245 * Release path before starting a new transaction so we don't hold locks 246 * that would confuse lockdep. 247 */ 248 btrfs_release_path(path); 249 /* 250 * If we end up here it means were copy the inline extent into a leaf 251 * of the destination inode. We know we will drop or adjust at most one 252 * extent item in the destination root. 253 * 254 * 1 unit - adjusting old extent (we may have to split it) 255 * 1 unit - add new extent 256 * 1 unit - inode update 257 */ 258 trans = btrfs_start_transaction(root, 3); 259 if (IS_ERR(trans)) { 260 ret = PTR_ERR(trans); 261 trans = NULL; 262 goto out; 263 } 264 drop_args.path = path; 265 drop_args.start = drop_start; 266 drop_args.end = aligned_end; 267 drop_args.drop_cache = true; 268 ret = btrfs_drop_extents(trans, root, BTRFS_I(dst), &drop_args); 269 if (ret) 270 goto out; 271 ret = btrfs_insert_empty_item(trans, root, path, new_key, size); 272 if (ret) 273 goto out; 274 275 write_extent_buffer(path->nodes[0], inline_data, 276 btrfs_item_ptr_offset(path->nodes[0], 277 path->slots[0]), 278 size); 279 btrfs_update_inode_bytes(BTRFS_I(dst), datal, drop_args.bytes_found); 280 set_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &BTRFS_I(dst)->runtime_flags); 281 ret = btrfs_inode_set_file_extent_range(BTRFS_I(dst), 0, aligned_end); 282 out: 283 if (!ret && !trans) { 284 /* 285 * No transaction here means we copied the inline extent into a 286 * page of the destination inode. 287 * 288 * 1 unit to update inode item 289 */ 290 trans = btrfs_start_transaction(root, 1); 291 if (IS_ERR(trans)) { 292 ret = PTR_ERR(trans); 293 trans = NULL; 294 } 295 } 296 if (ret && trans) { 297 btrfs_abort_transaction(trans, ret); 298 btrfs_end_transaction(trans); 299 } 300 if (!ret) 301 *trans_out = trans; 302 303 return ret; 304 305 copy_to_page: 306 /* 307 * Release our path because we don't need it anymore and also because 308 * copy_inline_to_page() needs to reserve data and metadata, which may 309 * need to flush delalloc when we are low on available space and 310 * therefore cause a deadlock if writeback of an inline extent needs to 311 * write to the same leaf or an ordered extent completion needs to write 312 * to the same leaf. 313 */ 314 btrfs_release_path(path); 315 316 ret = copy_inline_to_page(BTRFS_I(dst), new_key->offset, 317 inline_data, size, datal, comp_type); 318 goto out; 319 } 320 321 /** 322 * btrfs_clone() - clone a range from inode file to another 323 * 324 * @src: Inode to clone from 325 * @inode: Inode to clone to 326 * @off: Offset within source to start clone from 327 * @olen: Original length, passed by user, of range to clone 328 * @olen_aligned: Block-aligned value of olen 329 * @destoff: Offset within @inode to start clone 330 * @no_time_update: Whether to update mtime/ctime on the target inode 331 */ 332 static int btrfs_clone(struct inode *src, struct inode *inode, 333 const u64 off, const u64 olen, const u64 olen_aligned, 334 const u64 destoff, int no_time_update) 335 { 336 struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb); 337 struct btrfs_path *path = NULL; 338 struct extent_buffer *leaf; 339 struct btrfs_trans_handle *trans; 340 char *buf = NULL; 341 struct btrfs_key key; 342 u32 nritems; 343 int slot; 344 int ret; 345 const u64 len = olen_aligned; 346 u64 last_dest_end = destoff; 347 348 ret = -ENOMEM; 349 buf = kvmalloc(fs_info->nodesize, GFP_KERNEL); 350 if (!buf) 351 return ret; 352 353 path = btrfs_alloc_path(); 354 if (!path) { 355 kvfree(buf); 356 return ret; 357 } 358 359 path->reada = READA_FORWARD; 360 /* Clone data */ 361 key.objectid = btrfs_ino(BTRFS_I(src)); 362 key.type = BTRFS_EXTENT_DATA_KEY; 363 key.offset = off; 364 365 while (1) { 366 u64 next_key_min_offset = key.offset + 1; 367 struct btrfs_file_extent_item *extent; 368 u64 extent_gen; 369 int type; 370 u32 size; 371 struct btrfs_key new_key; 372 u64 disko = 0, diskl = 0; 373 u64 datao = 0, datal = 0; 374 u8 comp; 375 u64 drop_start; 376 377 /* Note the key will change type as we walk through the tree */ 378 ret = btrfs_search_slot(NULL, BTRFS_I(src)->root, &key, path, 379 0, 0); 380 if (ret < 0) 381 goto out; 382 /* 383 * First search, if no extent item that starts at offset off was 384 * found but the previous item is an extent item, it's possible 385 * it might overlap our target range, therefore process it. 386 */ 387 if (key.offset == off && ret > 0 && path->slots[0] > 0) { 388 btrfs_item_key_to_cpu(path->nodes[0], &key, 389 path->slots[0] - 1); 390 if (key.type == BTRFS_EXTENT_DATA_KEY) 391 path->slots[0]--; 392 } 393 394 nritems = btrfs_header_nritems(path->nodes[0]); 395 process_slot: 396 if (path->slots[0] >= nritems) { 397 ret = btrfs_next_leaf(BTRFS_I(src)->root, path); 398 if (ret < 0) 399 goto out; 400 if (ret > 0) 401 break; 402 nritems = btrfs_header_nritems(path->nodes[0]); 403 } 404 leaf = path->nodes[0]; 405 slot = path->slots[0]; 406 407 btrfs_item_key_to_cpu(leaf, &key, slot); 408 if (key.type > BTRFS_EXTENT_DATA_KEY || 409 key.objectid != btrfs_ino(BTRFS_I(src))) 410 break; 411 412 ASSERT(key.type == BTRFS_EXTENT_DATA_KEY); 413 414 extent = btrfs_item_ptr(leaf, slot, 415 struct btrfs_file_extent_item); 416 extent_gen = btrfs_file_extent_generation(leaf, extent); 417 comp = btrfs_file_extent_compression(leaf, extent); 418 type = btrfs_file_extent_type(leaf, extent); 419 if (type == BTRFS_FILE_EXTENT_REG || 420 type == BTRFS_FILE_EXTENT_PREALLOC) { 421 disko = btrfs_file_extent_disk_bytenr(leaf, extent); 422 diskl = btrfs_file_extent_disk_num_bytes(leaf, extent); 423 datao = btrfs_file_extent_offset(leaf, extent); 424 datal = btrfs_file_extent_num_bytes(leaf, extent); 425 } else if (type == BTRFS_FILE_EXTENT_INLINE) { 426 /* Take upper bound, may be compressed */ 427 datal = btrfs_file_extent_ram_bytes(leaf, extent); 428 } 429 430 /* 431 * The first search might have left us at an extent item that 432 * ends before our target range's start, can happen if we have 433 * holes and NO_HOLES feature enabled. 434 */ 435 if (key.offset + datal <= off) { 436 path->slots[0]++; 437 goto process_slot; 438 } else if (key.offset >= off + len) { 439 break; 440 } 441 next_key_min_offset = key.offset + datal; 442 size = btrfs_item_size_nr(leaf, slot); 443 read_extent_buffer(leaf, buf, btrfs_item_ptr_offset(leaf, slot), 444 size); 445 446 btrfs_release_path(path); 447 448 memcpy(&new_key, &key, sizeof(new_key)); 449 new_key.objectid = btrfs_ino(BTRFS_I(inode)); 450 if (off <= key.offset) 451 new_key.offset = key.offset + destoff - off; 452 else 453 new_key.offset = destoff; 454 455 /* 456 * Deal with a hole that doesn't have an extent item that 457 * represents it (NO_HOLES feature enabled). 458 * This hole is either in the middle of the cloning range or at 459 * the beginning (fully overlaps it or partially overlaps it). 460 */ 461 if (new_key.offset != last_dest_end) 462 drop_start = last_dest_end; 463 else 464 drop_start = new_key.offset; 465 466 if (type == BTRFS_FILE_EXTENT_REG || 467 type == BTRFS_FILE_EXTENT_PREALLOC) { 468 struct btrfs_replace_extent_info clone_info; 469 470 /* 471 * a | --- range to clone ---| b 472 * | ------------- extent ------------- | 473 */ 474 475 /* Subtract range b */ 476 if (key.offset + datal > off + len) 477 datal = off + len - key.offset; 478 479 /* Subtract range a */ 480 if (off > key.offset) { 481 datao += off - key.offset; 482 datal -= off - key.offset; 483 } 484 485 clone_info.disk_offset = disko; 486 clone_info.disk_len = diskl; 487 clone_info.data_offset = datao; 488 clone_info.data_len = datal; 489 clone_info.file_offset = new_key.offset; 490 clone_info.extent_buf = buf; 491 clone_info.is_new_extent = false; 492 ret = btrfs_replace_file_extents(BTRFS_I(inode), path, 493 drop_start, new_key.offset + datal - 1, 494 &clone_info, &trans); 495 if (ret) 496 goto out; 497 } else if (type == BTRFS_FILE_EXTENT_INLINE) { 498 /* 499 * Inline extents always have to start at file offset 0 500 * and can never be bigger then the sector size. We can 501 * never clone only parts of an inline extent, since all 502 * reflink operations must start at a sector size aligned 503 * offset, and the length must be aligned too or end at 504 * the i_size (which implies the whole inlined data). 505 */ 506 ASSERT(key.offset == 0); 507 ASSERT(datal <= fs_info->sectorsize); 508 if (key.offset != 0 || datal > fs_info->sectorsize) 509 return -EUCLEAN; 510 511 ret = clone_copy_inline_extent(inode, path, &new_key, 512 drop_start, datal, size, 513 comp, buf, &trans); 514 if (ret) 515 goto out; 516 } 517 518 btrfs_release_path(path); 519 520 /* 521 * If this is a new extent update the last_reflink_trans of both 522 * inodes. This is used by fsync to make sure it does not log 523 * multiple checksum items with overlapping ranges. For older 524 * extents we don't need to do it since inode logging skips the 525 * checksums for older extents. Also ignore holes and inline 526 * extents because they don't have checksums in the csum tree. 527 */ 528 if (extent_gen == trans->transid && disko > 0) { 529 BTRFS_I(src)->last_reflink_trans = trans->transid; 530 BTRFS_I(inode)->last_reflink_trans = trans->transid; 531 } 532 533 last_dest_end = ALIGN(new_key.offset + datal, 534 fs_info->sectorsize); 535 ret = clone_finish_inode_update(trans, inode, last_dest_end, 536 destoff, olen, no_time_update); 537 if (ret) 538 goto out; 539 if (new_key.offset + datal >= destoff + len) 540 break; 541 542 btrfs_release_path(path); 543 key.offset = next_key_min_offset; 544 545 if (fatal_signal_pending(current)) { 546 ret = -EINTR; 547 goto out; 548 } 549 550 cond_resched(); 551 } 552 ret = 0; 553 554 if (last_dest_end < destoff + len) { 555 /* 556 * We have an implicit hole that fully or partially overlaps our 557 * cloning range at its end. This means that we either have the 558 * NO_HOLES feature enabled or the implicit hole happened due to 559 * mixing buffered and direct IO writes against this file. 560 */ 561 btrfs_release_path(path); 562 563 /* 564 * When using NO_HOLES and we are cloning a range that covers 565 * only a hole (no extents) into a range beyond the current 566 * i_size, punching a hole in the target range will not create 567 * an extent map defining a hole, because the range starts at or 568 * beyond current i_size. If the file previously had an i_size 569 * greater than the new i_size set by this clone operation, we 570 * need to make sure the next fsync is a full fsync, so that it 571 * detects and logs a hole covering a range from the current 572 * i_size to the new i_size. If the clone range covers extents, 573 * besides a hole, then we know the full sync flag was already 574 * set by previous calls to btrfs_replace_file_extents() that 575 * replaced file extent items. 576 */ 577 if (last_dest_end >= i_size_read(inode)) 578 set_bit(BTRFS_INODE_NEEDS_FULL_SYNC, 579 &BTRFS_I(inode)->runtime_flags); 580 581 ret = btrfs_replace_file_extents(BTRFS_I(inode), path, 582 last_dest_end, destoff + len - 1, NULL, &trans); 583 if (ret) 584 goto out; 585 586 ret = clone_finish_inode_update(trans, inode, destoff + len, 587 destoff, olen, no_time_update); 588 } 589 590 out: 591 btrfs_free_path(path); 592 kvfree(buf); 593 clear_bit(BTRFS_INODE_NO_DELALLOC_FLUSH, &BTRFS_I(inode)->runtime_flags); 594 595 return ret; 596 } 597 598 static void btrfs_double_extent_unlock(struct inode *inode1, u64 loff1, 599 struct inode *inode2, u64 loff2, u64 len) 600 { 601 unlock_extent(&BTRFS_I(inode1)->io_tree, loff1, loff1 + len - 1); 602 unlock_extent(&BTRFS_I(inode2)->io_tree, loff2, loff2 + len - 1); 603 } 604 605 static void btrfs_double_extent_lock(struct inode *inode1, u64 loff1, 606 struct inode *inode2, u64 loff2, u64 len) 607 { 608 if (inode1 < inode2) { 609 swap(inode1, inode2); 610 swap(loff1, loff2); 611 } else if (inode1 == inode2 && loff2 < loff1) { 612 swap(loff1, loff2); 613 } 614 lock_extent(&BTRFS_I(inode1)->io_tree, loff1, loff1 + len - 1); 615 lock_extent(&BTRFS_I(inode2)->io_tree, loff2, loff2 + len - 1); 616 } 617 618 static void btrfs_double_mmap_lock(struct inode *inode1, struct inode *inode2) 619 { 620 if (inode1 < inode2) 621 swap(inode1, inode2); 622 down_write(&BTRFS_I(inode1)->i_mmap_lock); 623 down_write_nested(&BTRFS_I(inode2)->i_mmap_lock, SINGLE_DEPTH_NESTING); 624 } 625 626 static void btrfs_double_mmap_unlock(struct inode *inode1, struct inode *inode2) 627 { 628 up_write(&BTRFS_I(inode1)->i_mmap_lock); 629 up_write(&BTRFS_I(inode2)->i_mmap_lock); 630 } 631 632 static int btrfs_extent_same_range(struct inode *src, u64 loff, u64 len, 633 struct inode *dst, u64 dst_loff) 634 { 635 const u64 bs = BTRFS_I(src)->root->fs_info->sb->s_blocksize; 636 int ret; 637 638 /* 639 * Lock destination range to serialize with concurrent readpages() and 640 * source range to serialize with relocation. 641 */ 642 btrfs_double_extent_lock(src, loff, dst, dst_loff, len); 643 ret = btrfs_clone(src, dst, loff, len, ALIGN(len, bs), dst_loff, 1); 644 btrfs_double_extent_unlock(src, loff, dst, dst_loff, len); 645 646 return ret; 647 } 648 649 static int btrfs_extent_same(struct inode *src, u64 loff, u64 olen, 650 struct inode *dst, u64 dst_loff) 651 { 652 int ret = 0; 653 u64 i, tail_len, chunk_count; 654 struct btrfs_root *root_dst = BTRFS_I(dst)->root; 655 656 spin_lock(&root_dst->root_item_lock); 657 if (root_dst->send_in_progress) { 658 btrfs_warn_rl(root_dst->fs_info, 659 "cannot deduplicate to root %llu while send operations are using it (%d in progress)", 660 root_dst->root_key.objectid, 661 root_dst->send_in_progress); 662 spin_unlock(&root_dst->root_item_lock); 663 return -EAGAIN; 664 } 665 root_dst->dedupe_in_progress++; 666 spin_unlock(&root_dst->root_item_lock); 667 668 tail_len = olen % BTRFS_MAX_DEDUPE_LEN; 669 chunk_count = div_u64(olen, BTRFS_MAX_DEDUPE_LEN); 670 671 for (i = 0; i < chunk_count; i++) { 672 ret = btrfs_extent_same_range(src, loff, BTRFS_MAX_DEDUPE_LEN, 673 dst, dst_loff); 674 if (ret) 675 goto out; 676 677 loff += BTRFS_MAX_DEDUPE_LEN; 678 dst_loff += BTRFS_MAX_DEDUPE_LEN; 679 } 680 681 if (tail_len > 0) 682 ret = btrfs_extent_same_range(src, loff, tail_len, dst, dst_loff); 683 out: 684 spin_lock(&root_dst->root_item_lock); 685 root_dst->dedupe_in_progress--; 686 spin_unlock(&root_dst->root_item_lock); 687 688 return ret; 689 } 690 691 static noinline int btrfs_clone_files(struct file *file, struct file *file_src, 692 u64 off, u64 olen, u64 destoff) 693 { 694 struct inode *inode = file_inode(file); 695 struct inode *src = file_inode(file_src); 696 struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb); 697 int ret; 698 int wb_ret; 699 u64 len = olen; 700 u64 bs = fs_info->sb->s_blocksize; 701 702 /* 703 * VFS's generic_remap_file_range_prep() protects us from cloning the 704 * eof block into the middle of a file, which would result in corruption 705 * if the file size is not blocksize aligned. So we don't need to check 706 * for that case here. 707 */ 708 if (off + len == src->i_size) 709 len = ALIGN(src->i_size, bs) - off; 710 711 if (destoff > inode->i_size) { 712 const u64 wb_start = ALIGN_DOWN(inode->i_size, bs); 713 714 ret = btrfs_cont_expand(BTRFS_I(inode), inode->i_size, destoff); 715 if (ret) 716 return ret; 717 /* 718 * We may have truncated the last block if the inode's size is 719 * not sector size aligned, so we need to wait for writeback to 720 * complete before proceeding further, otherwise we can race 721 * with cloning and attempt to increment a reference to an 722 * extent that no longer exists (writeback completed right after 723 * we found the previous extent covering eof and before we 724 * attempted to increment its reference count). 725 */ 726 ret = btrfs_wait_ordered_range(inode, wb_start, 727 destoff - wb_start); 728 if (ret) 729 return ret; 730 } 731 732 /* 733 * Lock destination range to serialize with concurrent readpages() and 734 * source range to serialize with relocation. 735 */ 736 btrfs_double_extent_lock(src, off, inode, destoff, len); 737 ret = btrfs_clone(src, inode, off, olen, len, destoff, 0); 738 btrfs_double_extent_unlock(src, off, inode, destoff, len); 739 740 /* 741 * We may have copied an inline extent into a page of the destination 742 * range, so wait for writeback to complete before truncating pages 743 * from the page cache. This is a rare case. 744 */ 745 wb_ret = btrfs_wait_ordered_range(inode, destoff, len); 746 ret = ret ? ret : wb_ret; 747 /* 748 * Truncate page cache pages so that future reads will see the cloned 749 * data immediately and not the previous data. 750 */ 751 truncate_inode_pages_range(&inode->i_data, 752 round_down(destoff, PAGE_SIZE), 753 round_up(destoff + len, PAGE_SIZE) - 1); 754 755 return ret; 756 } 757 758 static int btrfs_remap_file_range_prep(struct file *file_in, loff_t pos_in, 759 struct file *file_out, loff_t pos_out, 760 loff_t *len, unsigned int remap_flags) 761 { 762 struct inode *inode_in = file_inode(file_in); 763 struct inode *inode_out = file_inode(file_out); 764 u64 bs = BTRFS_I(inode_out)->root->fs_info->sb->s_blocksize; 765 bool same_inode = inode_out == inode_in; 766 u64 wb_len; 767 int ret; 768 769 if (!(remap_flags & REMAP_FILE_DEDUP)) { 770 struct btrfs_root *root_out = BTRFS_I(inode_out)->root; 771 772 if (btrfs_root_readonly(root_out)) 773 return -EROFS; 774 775 if (file_in->f_path.mnt != file_out->f_path.mnt || 776 inode_in->i_sb != inode_out->i_sb) 777 return -EXDEV; 778 } 779 780 /* Don't make the dst file partly checksummed */ 781 if ((BTRFS_I(inode_in)->flags & BTRFS_INODE_NODATASUM) != 782 (BTRFS_I(inode_out)->flags & BTRFS_INODE_NODATASUM)) { 783 return -EINVAL; 784 } 785 786 /* 787 * Now that the inodes are locked, we need to start writeback ourselves 788 * and can not rely on the writeback from the VFS's generic helper 789 * generic_remap_file_range_prep() because: 790 * 791 * 1) For compression we must call filemap_fdatawrite_range() range 792 * twice (btrfs_fdatawrite_range() does it for us), and the generic 793 * helper only calls it once; 794 * 795 * 2) filemap_fdatawrite_range(), called by the generic helper only 796 * waits for the writeback to complete, i.e. for IO to be done, and 797 * not for the ordered extents to complete. We need to wait for them 798 * to complete so that new file extent items are in the fs tree. 799 */ 800 if (*len == 0 && !(remap_flags & REMAP_FILE_DEDUP)) 801 wb_len = ALIGN(inode_in->i_size, bs) - ALIGN_DOWN(pos_in, bs); 802 else 803 wb_len = ALIGN(*len, bs); 804 805 /* 806 * Since we don't lock ranges, wait for ongoing lockless dio writes (as 807 * any in progress could create its ordered extents after we wait for 808 * existing ordered extents below). 809 */ 810 inode_dio_wait(inode_in); 811 if (!same_inode) 812 inode_dio_wait(inode_out); 813 814 /* 815 * Workaround to make sure NOCOW buffered write reach disk as NOCOW. 816 * 817 * Btrfs' back references do not have a block level granularity, they 818 * work at the whole extent level. 819 * NOCOW buffered write without data space reserved may not be able 820 * to fall back to CoW due to lack of data space, thus could cause 821 * data loss. 822 * 823 * Here we take a shortcut by flushing the whole inode, so that all 824 * nocow write should reach disk as nocow before we increase the 825 * reference of the extent. We could do better by only flushing NOCOW 826 * data, but that needs extra accounting. 827 * 828 * Also we don't need to check ASYNC_EXTENT, as async extent will be 829 * CoWed anyway, not affecting nocow part. 830 */ 831 ret = filemap_flush(inode_in->i_mapping); 832 if (ret < 0) 833 return ret; 834 835 ret = btrfs_wait_ordered_range(inode_in, ALIGN_DOWN(pos_in, bs), 836 wb_len); 837 if (ret < 0) 838 return ret; 839 ret = btrfs_wait_ordered_range(inode_out, ALIGN_DOWN(pos_out, bs), 840 wb_len); 841 if (ret < 0) 842 return ret; 843 844 return generic_remap_file_range_prep(file_in, pos_in, file_out, pos_out, 845 len, remap_flags); 846 } 847 848 static bool file_sync_write(const struct file *file) 849 { 850 if (file->f_flags & (__O_SYNC | O_DSYNC)) 851 return true; 852 if (IS_SYNC(file_inode(file))) 853 return true; 854 855 return false; 856 } 857 858 loff_t btrfs_remap_file_range(struct file *src_file, loff_t off, 859 struct file *dst_file, loff_t destoff, loff_t len, 860 unsigned int remap_flags) 861 { 862 struct inode *src_inode = file_inode(src_file); 863 struct inode *dst_inode = file_inode(dst_file); 864 bool same_inode = dst_inode == src_inode; 865 int ret; 866 867 if (remap_flags & ~(REMAP_FILE_DEDUP | REMAP_FILE_ADVISORY)) 868 return -EINVAL; 869 870 if (same_inode) { 871 btrfs_inode_lock(src_inode, BTRFS_ILOCK_MMAP); 872 } else { 873 lock_two_nondirectories(src_inode, dst_inode); 874 btrfs_double_mmap_lock(src_inode, dst_inode); 875 } 876 877 ret = btrfs_remap_file_range_prep(src_file, off, dst_file, destoff, 878 &len, remap_flags); 879 if (ret < 0 || len == 0) 880 goto out_unlock; 881 882 if (remap_flags & REMAP_FILE_DEDUP) 883 ret = btrfs_extent_same(src_inode, off, len, dst_inode, destoff); 884 else 885 ret = btrfs_clone_files(dst_file, src_file, off, len, destoff); 886 887 out_unlock: 888 if (same_inode) { 889 btrfs_inode_unlock(src_inode, BTRFS_ILOCK_MMAP); 890 } else { 891 btrfs_double_mmap_unlock(src_inode, dst_inode); 892 unlock_two_nondirectories(src_inode, dst_inode); 893 } 894 895 /* 896 * If either the source or the destination file was opened with O_SYNC, 897 * O_DSYNC or has the S_SYNC attribute, fsync both the destination and 898 * source files/ranges, so that after a successful return (0) followed 899 * by a power failure results in the reflinked data to be readable from 900 * both files/ranges. 901 */ 902 if (ret == 0 && len > 0 && 903 (file_sync_write(src_file) || file_sync_write(dst_file))) { 904 ret = btrfs_sync_file(src_file, off, off + len - 1, 0); 905 if (ret == 0) 906 ret = btrfs_sync_file(dst_file, destoff, 907 destoff + len - 1, 0); 908 } 909 910 return ret < 0 ? ret : len; 911 } 912