1 /* 2 * w83627hf/thf WDT driver 3 * 4 * (c) Copyright 2013 Guenter Roeck 5 * converted to watchdog infrastructure 6 * 7 * (c) Copyright 2007 Vlad Drukker <vlad@storewiz.com> 8 * added support for W83627THF. 9 * 10 * (c) Copyright 2003,2007 Pádraig Brady <P@draigBrady.com> 11 * 12 * Based on advantechwdt.c which is based on wdt.c. 13 * Original copyright messages: 14 * 15 * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl> 16 * 17 * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, 18 * All Rights Reserved. 19 * 20 * This program is free software; you can redistribute it and/or 21 * modify it under the terms of the GNU General Public License 22 * as published by the Free Software Foundation; either version 23 * 2 of the License, or (at your option) any later version. 24 * 25 * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide 26 * warranty for any of this software. This material is provided 27 * "AS-IS" and at no charge. 28 * 29 * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> 30 */ 31 32 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 33 34 #include <linux/module.h> 35 #include <linux/moduleparam.h> 36 #include <linux/types.h> 37 #include <linux/watchdog.h> 38 #include <linux/ioport.h> 39 #include <linux/init.h> 40 #include <linux/io.h> 41 42 #define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT" 43 #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ 44 45 static int wdt_io; 46 static int cr_wdt_timeout; /* WDT timeout register */ 47 static int cr_wdt_control; /* WDT control register */ 48 static int cr_wdt_csr; /* WDT control & status register */ 49 50 enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf, 51 w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p, 52 w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6102 }; 53 54 static int timeout; /* in seconds */ 55 module_param(timeout, int, 0); 56 MODULE_PARM_DESC(timeout, 57 "Watchdog timeout in seconds. 1 <= timeout <= 255, default=" 58 __MODULE_STRING(WATCHDOG_TIMEOUT) "."); 59 60 static bool nowayout = WATCHDOG_NOWAYOUT; 61 module_param(nowayout, bool, 0); 62 MODULE_PARM_DESC(nowayout, 63 "Watchdog cannot be stopped once started (default=" 64 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); 65 66 static int early_disable; 67 module_param(early_disable, int, 0); 68 MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)"); 69 70 /* 71 * Kernel methods. 72 */ 73 74 #define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */ 75 #define WDT_EFIR (wdt_io+0) /* Extended Function Index Register 76 (same as EFER) */ 77 #define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */ 78 79 #define W83627HF_LD_WDT 0x08 80 81 #define W83627HF_ID 0x52 82 #define W83627S_ID 0x59 83 #define W83697HF_ID 0x60 84 #define W83697UG_ID 0x68 85 #define W83637HF_ID 0x70 86 #define W83627THF_ID 0x82 87 #define W83687THF_ID 0x85 88 #define W83627EHF_ID 0x88 89 #define W83627DHG_ID 0xa0 90 #define W83627UHG_ID 0xa2 91 #define W83667HG_ID 0xa5 92 #define W83627DHG_P_ID 0xb0 93 #define W83667HG_B_ID 0xb3 94 #define NCT6775_ID 0xb4 95 #define NCT6776_ID 0xc3 96 #define NCT6102_ID 0xc4 97 #define NCT6779_ID 0xc5 98 #define NCT6791_ID 0xc8 99 #define NCT6792_ID 0xc9 100 101 #define W83627HF_WDT_TIMEOUT 0xf6 102 #define W83697HF_WDT_TIMEOUT 0xf4 103 #define NCT6102D_WDT_TIMEOUT 0xf1 104 105 #define W83627HF_WDT_CONTROL 0xf5 106 #define W83697HF_WDT_CONTROL 0xf3 107 #define NCT6102D_WDT_CONTROL 0xf0 108 109 #define W836X7HF_WDT_CSR 0xf7 110 #define NCT6102D_WDT_CSR 0xf2 111 112 static void superio_outb(int reg, int val) 113 { 114 outb(reg, WDT_EFER); 115 outb(val, WDT_EFDR); 116 } 117 118 static inline int superio_inb(int reg) 119 { 120 outb(reg, WDT_EFER); 121 return inb(WDT_EFDR); 122 } 123 124 static int superio_enter(void) 125 { 126 if (!request_muxed_region(wdt_io, 2, WATCHDOG_NAME)) 127 return -EBUSY; 128 129 outb_p(0x87, WDT_EFER); /* Enter extended function mode */ 130 outb_p(0x87, WDT_EFER); /* Again according to manual */ 131 132 return 0; 133 } 134 135 static void superio_select(int ld) 136 { 137 superio_outb(0x07, ld); 138 } 139 140 static void superio_exit(void) 141 { 142 outb_p(0xAA, WDT_EFER); /* Leave extended function mode */ 143 release_region(wdt_io, 2); 144 } 145 146 static int w83627hf_init(struct watchdog_device *wdog, enum chips chip) 147 { 148 int ret; 149 unsigned char t; 150 151 ret = superio_enter(); 152 if (ret) 153 return ret; 154 155 superio_select(W83627HF_LD_WDT); 156 157 /* set CR30 bit 0 to activate GPIO2 */ 158 t = superio_inb(0x30); 159 if (!(t & 0x01)) 160 superio_outb(0x30, t | 0x01); 161 162 switch (chip) { 163 case w83627hf: 164 case w83627s: 165 t = superio_inb(0x2B) & ~0x10; 166 superio_outb(0x2B, t); /* set GPIO24 to WDT0 */ 167 break; 168 case w83697hf: 169 /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ 170 t = superio_inb(0x29) & ~0x60; 171 t |= 0x20; 172 superio_outb(0x29, t); 173 break; 174 case w83697ug: 175 /* Set pin 118 to WDTO# mode */ 176 t = superio_inb(0x2b) & ~0x04; 177 superio_outb(0x2b, t); 178 break; 179 case w83627thf: 180 t = (superio_inb(0x2B) & ~0x08) | 0x04; 181 superio_outb(0x2B, t); /* set GPIO3 to WDT0 */ 182 break; 183 case w83627dhg: 184 case w83627dhg_p: 185 t = superio_inb(0x2D) & ~0x01; /* PIN77 -> WDT0# */ 186 superio_outb(0x2D, t); /* set GPIO5 to WDT0 */ 187 t = superio_inb(cr_wdt_control); 188 t |= 0x02; /* enable the WDTO# output low pulse 189 * to the KBRST# pin */ 190 superio_outb(cr_wdt_control, t); 191 break; 192 case w83637hf: 193 break; 194 case w83687thf: 195 t = superio_inb(0x2C) & ~0x80; /* PIN47 -> WDT0# */ 196 superio_outb(0x2C, t); 197 break; 198 case w83627ehf: 199 case w83627uhg: 200 case w83667hg: 201 case w83667hg_b: 202 case nct6775: 203 case nct6776: 204 case nct6779: 205 case nct6791: 206 case nct6792: 207 case nct6102: 208 /* 209 * These chips have a fixed WDTO# output pin (W83627UHG), 210 * or support more than one WDTO# output pin. 211 * Don't touch its configuration, and hope the BIOS 212 * does the right thing. 213 */ 214 t = superio_inb(cr_wdt_control); 215 t |= 0x02; /* enable the WDTO# output low pulse 216 * to the KBRST# pin */ 217 superio_outb(cr_wdt_control, t); 218 break; 219 default: 220 break; 221 } 222 223 t = superio_inb(cr_wdt_timeout); 224 if (t != 0) { 225 if (early_disable) { 226 pr_warn("Stopping previously enabled watchdog until userland kicks in\n"); 227 superio_outb(cr_wdt_timeout, 0); 228 } else { 229 pr_info("Watchdog already running. Resetting timeout to %d sec\n", 230 wdog->timeout); 231 superio_outb(cr_wdt_timeout, wdog->timeout); 232 } 233 } 234 235 /* set second mode & disable keyboard turning off watchdog */ 236 t = superio_inb(cr_wdt_control) & ~0x0C; 237 superio_outb(cr_wdt_control, t); 238 239 /* reset trigger, disable keyboard & mouse turning off watchdog */ 240 t = superio_inb(cr_wdt_csr) & ~0xD0; 241 superio_outb(cr_wdt_csr, t); 242 243 superio_exit(); 244 245 return 0; 246 } 247 248 static int wdt_set_time(unsigned int timeout) 249 { 250 int ret; 251 252 ret = superio_enter(); 253 if (ret) 254 return ret; 255 256 superio_select(W83627HF_LD_WDT); 257 superio_outb(cr_wdt_timeout, timeout); 258 superio_exit(); 259 260 return 0; 261 } 262 263 static int wdt_start(struct watchdog_device *wdog) 264 { 265 return wdt_set_time(wdog->timeout); 266 } 267 268 static int wdt_stop(struct watchdog_device *wdog) 269 { 270 return wdt_set_time(0); 271 } 272 273 static int wdt_set_timeout(struct watchdog_device *wdog, unsigned int timeout) 274 { 275 wdog->timeout = timeout; 276 277 return 0; 278 } 279 280 static unsigned int wdt_get_time(struct watchdog_device *wdog) 281 { 282 unsigned int timeleft; 283 int ret; 284 285 ret = superio_enter(); 286 if (ret) 287 return 0; 288 289 superio_select(W83627HF_LD_WDT); 290 timeleft = superio_inb(cr_wdt_timeout); 291 superio_exit(); 292 293 return timeleft; 294 } 295 296 /* 297 * Kernel Interfaces 298 */ 299 300 static struct watchdog_info wdt_info = { 301 .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, 302 .identity = "W83627HF Watchdog", 303 }; 304 305 static const struct watchdog_ops wdt_ops = { 306 .owner = THIS_MODULE, 307 .start = wdt_start, 308 .stop = wdt_stop, 309 .set_timeout = wdt_set_timeout, 310 .get_timeleft = wdt_get_time, 311 }; 312 313 static struct watchdog_device wdt_dev = { 314 .info = &wdt_info, 315 .ops = &wdt_ops, 316 .timeout = WATCHDOG_TIMEOUT, 317 .min_timeout = 1, 318 .max_timeout = 255, 319 }; 320 321 /* 322 * The WDT needs to learn about soft shutdowns in order to 323 * turn the timebomb registers off. 324 */ 325 326 static int wdt_find(int addr) 327 { 328 u8 val; 329 int ret; 330 331 cr_wdt_timeout = W83627HF_WDT_TIMEOUT; 332 cr_wdt_control = W83627HF_WDT_CONTROL; 333 cr_wdt_csr = W836X7HF_WDT_CSR; 334 335 ret = superio_enter(); 336 if (ret) 337 return ret; 338 superio_select(W83627HF_LD_WDT); 339 val = superio_inb(0x20); 340 switch (val) { 341 case W83627HF_ID: 342 ret = w83627hf; 343 break; 344 case W83627S_ID: 345 ret = w83627s; 346 break; 347 case W83697HF_ID: 348 ret = w83697hf; 349 cr_wdt_timeout = W83697HF_WDT_TIMEOUT; 350 cr_wdt_control = W83697HF_WDT_CONTROL; 351 break; 352 case W83697UG_ID: 353 ret = w83697ug; 354 cr_wdt_timeout = W83697HF_WDT_TIMEOUT; 355 cr_wdt_control = W83697HF_WDT_CONTROL; 356 break; 357 case W83637HF_ID: 358 ret = w83637hf; 359 break; 360 case W83627THF_ID: 361 ret = w83627thf; 362 break; 363 case W83687THF_ID: 364 ret = w83687thf; 365 break; 366 case W83627EHF_ID: 367 ret = w83627ehf; 368 break; 369 case W83627DHG_ID: 370 ret = w83627dhg; 371 break; 372 case W83627DHG_P_ID: 373 ret = w83627dhg_p; 374 break; 375 case W83627UHG_ID: 376 ret = w83627uhg; 377 break; 378 case W83667HG_ID: 379 ret = w83667hg; 380 break; 381 case W83667HG_B_ID: 382 ret = w83667hg_b; 383 break; 384 case NCT6775_ID: 385 ret = nct6775; 386 break; 387 case NCT6776_ID: 388 ret = nct6776; 389 break; 390 case NCT6779_ID: 391 ret = nct6779; 392 break; 393 case NCT6791_ID: 394 ret = nct6791; 395 break; 396 case NCT6792_ID: 397 ret = nct6792; 398 break; 399 case NCT6102_ID: 400 ret = nct6102; 401 cr_wdt_timeout = NCT6102D_WDT_TIMEOUT; 402 cr_wdt_control = NCT6102D_WDT_CONTROL; 403 cr_wdt_csr = NCT6102D_WDT_CSR; 404 break; 405 case 0xff: 406 ret = -ENODEV; 407 break; 408 default: 409 ret = -ENODEV; 410 pr_err("Unsupported chip ID: 0x%02x\n", val); 411 break; 412 } 413 superio_exit(); 414 return ret; 415 } 416 417 static int __init wdt_init(void) 418 { 419 int ret; 420 int chip; 421 const char * const chip_name[] = { 422 "W83627HF", 423 "W83627S", 424 "W83697HF", 425 "W83697UG", 426 "W83637HF", 427 "W83627THF", 428 "W83687THF", 429 "W83627EHF", 430 "W83627DHG", 431 "W83627UHG", 432 "W83667HG", 433 "W83667DHG-P", 434 "W83667HG-B", 435 "NCT6775", 436 "NCT6776", 437 "NCT6779", 438 "NCT6791", 439 "NCT6792", 440 "NCT6102", 441 }; 442 443 wdt_io = 0x2e; 444 chip = wdt_find(0x2e); 445 if (chip < 0) { 446 wdt_io = 0x4e; 447 chip = wdt_find(0x4e); 448 if (chip < 0) 449 return chip; 450 } 451 452 pr_info("WDT driver for %s Super I/O chip initialising\n", 453 chip_name[chip]); 454 455 watchdog_init_timeout(&wdt_dev, timeout, NULL); 456 watchdog_set_nowayout(&wdt_dev, nowayout); 457 watchdog_stop_on_reboot(&wdt_dev); 458 459 ret = w83627hf_init(&wdt_dev, chip); 460 if (ret) { 461 pr_err("failed to initialize watchdog (err=%d)\n", ret); 462 return ret; 463 } 464 465 ret = watchdog_register_device(&wdt_dev); 466 if (ret) 467 return ret; 468 469 pr_info("initialized. timeout=%d sec (nowayout=%d)\n", 470 wdt_dev.timeout, nowayout); 471 472 return ret; 473 } 474 475 static void __exit wdt_exit(void) 476 { 477 watchdog_unregister_device(&wdt_dev); 478 } 479 480 module_init(wdt_init); 481 module_exit(wdt_exit); 482 483 MODULE_LICENSE("GPL"); 484 MODULE_AUTHOR("Pádraig Brady <P@draigBrady.com>"); 485 MODULE_DESCRIPTION("w83627hf/thf WDT driver"); 486