1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright 2005-2008 Freescale Semiconductor, Inc. All Rights Reserved. 4 * Copyright 2008 Luotao Fu, kernel@pengutronix.de 5 */ 6 7 #include <linux/clk.h> 8 #include <linux/delay.h> 9 #include <linux/io.h> 10 #include <linux/jiffies.h> 11 #include <linux/module.h> 12 #include <linux/mod_devicetable.h> 13 #include <linux/platform_device.h> 14 15 #include <linux/w1.h> 16 17 /* 18 * MXC W1 Register offsets 19 */ 20 #define MXC_W1_CONTROL 0x00 21 # define MXC_W1_CONTROL_RDST BIT(3) 22 # define MXC_W1_CONTROL_WR(x) BIT(5 - (x)) 23 # define MXC_W1_CONTROL_PST BIT(6) 24 # define MXC_W1_CONTROL_RPP BIT(7) 25 #define MXC_W1_TIME_DIVIDER 0x02 26 #define MXC_W1_RESET 0x04 27 # define MXC_W1_RESET_RST BIT(0) 28 29 struct mxc_w1_device { 30 void __iomem *regs; 31 struct clk *clk; 32 struct w1_bus_master bus_master; 33 }; 34 35 /* 36 * this is the low level routine to 37 * reset the device on the One Wire interface 38 * on the hardware 39 */ 40 static u8 mxc_w1_ds2_reset_bus(void *data) 41 { 42 struct mxc_w1_device *dev = data; 43 unsigned long timeout; 44 45 writeb(MXC_W1_CONTROL_RPP, dev->regs + MXC_W1_CONTROL); 46 47 /* Wait for reset sequence 511+512us, use 1500us for sure */ 48 timeout = jiffies + usecs_to_jiffies(1500); 49 50 udelay(511 + 512); 51 52 do { 53 u8 ctrl = readb(dev->regs + MXC_W1_CONTROL); 54 55 /* PST bit is valid after the RPP bit is self-cleared */ 56 if (!(ctrl & MXC_W1_CONTROL_RPP)) 57 return !(ctrl & MXC_W1_CONTROL_PST); 58 } while (time_is_after_jiffies(timeout)); 59 60 return 1; 61 } 62 63 /* 64 * this is the low level routine to read/write a bit on the One Wire 65 * interface on the hardware. It does write 0 if parameter bit is set 66 * to 0, otherwise a write 1/read. 67 */ 68 static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit) 69 { 70 struct mxc_w1_device *dev = data; 71 unsigned long timeout; 72 73 writeb(MXC_W1_CONTROL_WR(bit), dev->regs + MXC_W1_CONTROL); 74 75 /* Wait for read/write bit (60us, Max 120us), use 200us for sure */ 76 timeout = jiffies + usecs_to_jiffies(200); 77 78 udelay(60); 79 80 do { 81 u8 ctrl = readb(dev->regs + MXC_W1_CONTROL); 82 83 /* RDST bit is valid after the WR1/RD bit is self-cleared */ 84 if (!(ctrl & MXC_W1_CONTROL_WR(bit))) 85 return !!(ctrl & MXC_W1_CONTROL_RDST); 86 } while (time_is_after_jiffies(timeout)); 87 88 return 0; 89 } 90 91 static int mxc_w1_probe(struct platform_device *pdev) 92 { 93 struct mxc_w1_device *mdev; 94 unsigned long clkrate; 95 unsigned int clkdiv; 96 int err; 97 98 mdev = devm_kzalloc(&pdev->dev, sizeof(struct mxc_w1_device), 99 GFP_KERNEL); 100 if (!mdev) 101 return -ENOMEM; 102 103 mdev->clk = devm_clk_get(&pdev->dev, NULL); 104 if (IS_ERR(mdev->clk)) 105 return PTR_ERR(mdev->clk); 106 107 err = clk_prepare_enable(mdev->clk); 108 if (err) 109 return err; 110 111 clkrate = clk_get_rate(mdev->clk); 112 if (clkrate < 10000000) 113 dev_warn(&pdev->dev, 114 "Low clock frequency causes improper function\n"); 115 116 clkdiv = DIV_ROUND_CLOSEST(clkrate, 1000000); 117 clkrate /= clkdiv; 118 if ((clkrate < 980000) || (clkrate > 1020000)) 119 dev_warn(&pdev->dev, 120 "Incorrect time base frequency %lu Hz\n", clkrate); 121 122 mdev->regs = devm_platform_ioremap_resource(pdev, 0); 123 if (IS_ERR(mdev->regs)) { 124 err = PTR_ERR(mdev->regs); 125 goto out_disable_clk; 126 } 127 128 /* Software reset 1-Wire module */ 129 writeb(MXC_W1_RESET_RST, mdev->regs + MXC_W1_RESET); 130 writeb(0, mdev->regs + MXC_W1_RESET); 131 132 writeb(clkdiv - 1, mdev->regs + MXC_W1_TIME_DIVIDER); 133 134 mdev->bus_master.data = mdev; 135 mdev->bus_master.reset_bus = mxc_w1_ds2_reset_bus; 136 mdev->bus_master.touch_bit = mxc_w1_ds2_touch_bit; 137 138 platform_set_drvdata(pdev, mdev); 139 140 err = w1_add_master_device(&mdev->bus_master); 141 if (err) 142 goto out_disable_clk; 143 144 return 0; 145 146 out_disable_clk: 147 clk_disable_unprepare(mdev->clk); 148 return err; 149 } 150 151 /* 152 * disassociate the w1 device from the driver 153 */ 154 static int mxc_w1_remove(struct platform_device *pdev) 155 { 156 struct mxc_w1_device *mdev = platform_get_drvdata(pdev); 157 158 w1_remove_master_device(&mdev->bus_master); 159 160 clk_disable_unprepare(mdev->clk); 161 162 return 0; 163 } 164 165 static const struct of_device_id mxc_w1_dt_ids[] = { 166 { .compatible = "fsl,imx21-owire" }, 167 { /* sentinel */ } 168 }; 169 MODULE_DEVICE_TABLE(of, mxc_w1_dt_ids); 170 171 static struct platform_driver mxc_w1_driver = { 172 .driver = { 173 .name = "mxc_w1", 174 .of_match_table = mxc_w1_dt_ids, 175 }, 176 .probe = mxc_w1_probe, 177 .remove = mxc_w1_remove, 178 }; 179 module_platform_driver(mxc_w1_driver); 180 181 MODULE_LICENSE("GPL"); 182 MODULE_AUTHOR("Freescale Semiconductors Inc"); 183 MODULE_DESCRIPTION("Driver for One-Wire on MXC"); 184