1 /* 2 * Driver for the Solomon SSD1307 OLED controller 3 * 4 * Copyright 2012 Free Electrons 5 * 6 * Licensed under the GPLv2 or later. 7 */ 8 9 #include <linux/backlight.h> 10 #include <linux/delay.h> 11 #include <linux/fb.h> 12 #include <linux/i2c.h> 13 #include <linux/kernel.h> 14 #include <linux/module.h> 15 #include <linux/of_device.h> 16 #include <linux/of_gpio.h> 17 #include <linux/pwm.h> 18 #include <linux/uaccess.h> 19 20 #define SSD1307FB_DATA 0x40 21 #define SSD1307FB_COMMAND 0x80 22 23 #define SSD1307FB_SET_ADDRESS_MODE 0x20 24 #define SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL (0x00) 25 #define SSD1307FB_SET_ADDRESS_MODE_VERTICAL (0x01) 26 #define SSD1307FB_SET_ADDRESS_MODE_PAGE (0x02) 27 #define SSD1307FB_SET_COL_RANGE 0x21 28 #define SSD1307FB_SET_PAGE_RANGE 0x22 29 #define SSD1307FB_CONTRAST 0x81 30 #define SSD1307FB_CHARGE_PUMP 0x8d 31 #define SSD1307FB_SEG_REMAP_ON 0xa1 32 #define SSD1307FB_DISPLAY_OFF 0xae 33 #define SSD1307FB_SET_MULTIPLEX_RATIO 0xa8 34 #define SSD1307FB_DISPLAY_ON 0xaf 35 #define SSD1307FB_START_PAGE_ADDRESS 0xb0 36 #define SSD1307FB_SET_DISPLAY_OFFSET 0xd3 37 #define SSD1307FB_SET_CLOCK_FREQ 0xd5 38 #define SSD1307FB_SET_PRECHARGE_PERIOD 0xd9 39 #define SSD1307FB_SET_COM_PINS_CONFIG 0xda 40 #define SSD1307FB_SET_VCOMH 0xdb 41 42 #define MAX_CONTRAST 255 43 44 #define REFRESHRATE 1 45 46 static u_int refreshrate = REFRESHRATE; 47 module_param(refreshrate, uint, 0); 48 49 struct ssd1307fb_par; 50 51 struct ssd1307fb_deviceinfo { 52 u32 default_vcomh; 53 u32 default_dclk_div; 54 u32 default_dclk_frq; 55 int need_pwm; 56 int need_chargepump; 57 }; 58 59 struct ssd1307fb_par { 60 u32 com_invdir; 61 u32 com_lrremap; 62 u32 com_offset; 63 u32 com_seq; 64 u32 contrast; 65 u32 dclk_div; 66 u32 dclk_frq; 67 struct ssd1307fb_deviceinfo *device_info; 68 struct i2c_client *client; 69 u32 height; 70 struct fb_info *info; 71 u32 page_offset; 72 u32 prechargep1; 73 u32 prechargep2; 74 struct pwm_device *pwm; 75 u32 pwm_period; 76 int reset; 77 u32 seg_remap; 78 u32 vcomh; 79 u32 width; 80 }; 81 82 struct ssd1307fb_array { 83 u8 type; 84 u8 data[0]; 85 }; 86 87 static struct fb_fix_screeninfo ssd1307fb_fix = { 88 .id = "Solomon SSD1307", 89 .type = FB_TYPE_PACKED_PIXELS, 90 .visual = FB_VISUAL_MONO10, 91 .xpanstep = 0, 92 .ypanstep = 0, 93 .ywrapstep = 0, 94 .accel = FB_ACCEL_NONE, 95 }; 96 97 static struct fb_var_screeninfo ssd1307fb_var = { 98 .bits_per_pixel = 1, 99 }; 100 101 static struct ssd1307fb_array *ssd1307fb_alloc_array(u32 len, u8 type) 102 { 103 struct ssd1307fb_array *array; 104 105 array = kzalloc(sizeof(struct ssd1307fb_array) + len, GFP_KERNEL); 106 if (!array) 107 return NULL; 108 109 array->type = type; 110 111 return array; 112 } 113 114 static int ssd1307fb_write_array(struct i2c_client *client, 115 struct ssd1307fb_array *array, u32 len) 116 { 117 int ret; 118 119 len += sizeof(struct ssd1307fb_array); 120 121 ret = i2c_master_send(client, (u8 *)array, len); 122 if (ret != len) { 123 dev_err(&client->dev, "Couldn't send I2C command.\n"); 124 return ret; 125 } 126 127 return 0; 128 } 129 130 static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd) 131 { 132 struct ssd1307fb_array *array; 133 int ret; 134 135 array = ssd1307fb_alloc_array(1, SSD1307FB_COMMAND); 136 if (!array) 137 return -ENOMEM; 138 139 array->data[0] = cmd; 140 141 ret = ssd1307fb_write_array(client, array, 1); 142 kfree(array); 143 144 return ret; 145 } 146 147 static void ssd1307fb_update_display(struct ssd1307fb_par *par) 148 { 149 struct ssd1307fb_array *array; 150 u8 *vmem = par->info->screen_base; 151 int i, j, k; 152 153 array = ssd1307fb_alloc_array(par->width * par->height / 8, 154 SSD1307FB_DATA); 155 if (!array) 156 return; 157 158 /* 159 * The screen is divided in pages, each having a height of 8 160 * pixels, and the width of the screen. When sending a byte of 161 * data to the controller, it gives the 8 bits for the current 162 * column. I.e, the first byte are the 8 bits of the first 163 * column, then the 8 bits for the second column, etc. 164 * 165 * 166 * Representation of the screen, assuming it is 5 bits 167 * wide. Each letter-number combination is a bit that controls 168 * one pixel. 169 * 170 * A0 A1 A2 A3 A4 171 * B0 B1 B2 B3 B4 172 * C0 C1 C2 C3 C4 173 * D0 D1 D2 D3 D4 174 * E0 E1 E2 E3 E4 175 * F0 F1 F2 F3 F4 176 * G0 G1 G2 G3 G4 177 * H0 H1 H2 H3 H4 178 * 179 * If you want to update this screen, you need to send 5 bytes: 180 * (1) A0 B0 C0 D0 E0 F0 G0 H0 181 * (2) A1 B1 C1 D1 E1 F1 G1 H1 182 * (3) A2 B2 C2 D2 E2 F2 G2 H2 183 * (4) A3 B3 C3 D3 E3 F3 G3 H3 184 * (5) A4 B4 C4 D4 E4 F4 G4 H4 185 */ 186 187 for (i = 0; i < (par->height / 8); i++) { 188 for (j = 0; j < par->width; j++) { 189 u32 array_idx = i * par->width + j; 190 array->data[array_idx] = 0; 191 for (k = 0; k < 8; k++) { 192 u32 page_length = par->width * i; 193 u32 index = page_length + (par->width * k + j) / 8; 194 u8 byte = *(vmem + index); 195 u8 bit = byte & (1 << (j % 8)); 196 bit = bit >> (j % 8); 197 array->data[array_idx] |= bit << k; 198 } 199 } 200 } 201 202 ssd1307fb_write_array(par->client, array, par->width * par->height / 8); 203 kfree(array); 204 } 205 206 207 static ssize_t ssd1307fb_write(struct fb_info *info, const char __user *buf, 208 size_t count, loff_t *ppos) 209 { 210 struct ssd1307fb_par *par = info->par; 211 unsigned long total_size; 212 unsigned long p = *ppos; 213 u8 __iomem *dst; 214 215 total_size = info->fix.smem_len; 216 217 if (p > total_size) 218 return -EINVAL; 219 220 if (count + p > total_size) 221 count = total_size - p; 222 223 if (!count) 224 return -EINVAL; 225 226 dst = (void __force *) (info->screen_base + p); 227 228 if (copy_from_user(dst, buf, count)) 229 return -EFAULT; 230 231 ssd1307fb_update_display(par); 232 233 *ppos += count; 234 235 return count; 236 } 237 238 static int ssd1307fb_blank(int blank_mode, struct fb_info *info) 239 { 240 struct ssd1307fb_par *par = info->par; 241 242 if (blank_mode != FB_BLANK_UNBLANK) 243 return ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_OFF); 244 else 245 return ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON); 246 } 247 248 static void ssd1307fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) 249 { 250 struct ssd1307fb_par *par = info->par; 251 sys_fillrect(info, rect); 252 ssd1307fb_update_display(par); 253 } 254 255 static void ssd1307fb_copyarea(struct fb_info *info, const struct fb_copyarea *area) 256 { 257 struct ssd1307fb_par *par = info->par; 258 sys_copyarea(info, area); 259 ssd1307fb_update_display(par); 260 } 261 262 static void ssd1307fb_imageblit(struct fb_info *info, const struct fb_image *image) 263 { 264 struct ssd1307fb_par *par = info->par; 265 sys_imageblit(info, image); 266 ssd1307fb_update_display(par); 267 } 268 269 static struct fb_ops ssd1307fb_ops = { 270 .owner = THIS_MODULE, 271 .fb_read = fb_sys_read, 272 .fb_write = ssd1307fb_write, 273 .fb_blank = ssd1307fb_blank, 274 .fb_fillrect = ssd1307fb_fillrect, 275 .fb_copyarea = ssd1307fb_copyarea, 276 .fb_imageblit = ssd1307fb_imageblit, 277 }; 278 279 static void ssd1307fb_deferred_io(struct fb_info *info, 280 struct list_head *pagelist) 281 { 282 ssd1307fb_update_display(info->par); 283 } 284 285 static int ssd1307fb_init(struct ssd1307fb_par *par) 286 { 287 int ret; 288 u32 precharge, dclk, com_invdir, compins; 289 struct pwm_args pargs; 290 291 if (par->device_info->need_pwm) { 292 par->pwm = pwm_get(&par->client->dev, NULL); 293 if (IS_ERR(par->pwm)) { 294 dev_err(&par->client->dev, "Could not get PWM from device tree!\n"); 295 return PTR_ERR(par->pwm); 296 } 297 298 /* 299 * FIXME: pwm_apply_args() should be removed when switching to 300 * the atomic PWM API. 301 */ 302 pwm_apply_args(par->pwm); 303 304 pwm_get_args(par->pwm, &pargs); 305 306 par->pwm_period = pargs.period; 307 /* Enable the PWM */ 308 pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period); 309 pwm_enable(par->pwm); 310 311 dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n", 312 par->pwm->pwm, par->pwm_period); 313 }; 314 315 /* Set initial contrast */ 316 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST); 317 if (ret < 0) 318 return ret; 319 320 ret = ssd1307fb_write_cmd(par->client, par->contrast); 321 if (ret < 0) 322 return ret; 323 324 /* Set segment re-map */ 325 if (par->seg_remap) { 326 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON); 327 if (ret < 0) 328 return ret; 329 }; 330 331 /* Set COM direction */ 332 com_invdir = 0xc0 | (par->com_invdir & 0x1) << 3; 333 ret = ssd1307fb_write_cmd(par->client, com_invdir); 334 if (ret < 0) 335 return ret; 336 337 /* Set multiplex ratio value */ 338 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO); 339 if (ret < 0) 340 return ret; 341 342 ret = ssd1307fb_write_cmd(par->client, par->height - 1); 343 if (ret < 0) 344 return ret; 345 346 /* set display offset value */ 347 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET); 348 if (ret < 0) 349 return ret; 350 351 ret = ssd1307fb_write_cmd(par->client, par->com_offset); 352 if (ret < 0) 353 return ret; 354 355 /* Set clock frequency */ 356 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ); 357 if (ret < 0) 358 return ret; 359 360 dclk = ((par->dclk_div - 1) & 0xf) | (par->dclk_frq & 0xf) << 4; 361 ret = ssd1307fb_write_cmd(par->client, dclk); 362 if (ret < 0) 363 return ret; 364 365 /* Set precharge period in number of ticks from the internal clock */ 366 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD); 367 if (ret < 0) 368 return ret; 369 370 precharge = (par->prechargep1 & 0xf) | (par->prechargep2 & 0xf) << 4; 371 ret = ssd1307fb_write_cmd(par->client, precharge); 372 if (ret < 0) 373 return ret; 374 375 /* Set COM pins configuration */ 376 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG); 377 if (ret < 0) 378 return ret; 379 380 compins = 0x02 | !(par->com_seq & 0x1) << 4 381 | (par->com_lrremap & 0x1) << 5; 382 ret = ssd1307fb_write_cmd(par->client, compins); 383 if (ret < 0) 384 return ret; 385 386 /* Set VCOMH */ 387 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH); 388 if (ret < 0) 389 return ret; 390 391 ret = ssd1307fb_write_cmd(par->client, par->vcomh); 392 if (ret < 0) 393 return ret; 394 395 /* Turn on the DC-DC Charge Pump */ 396 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP); 397 if (ret < 0) 398 return ret; 399 400 ret = ssd1307fb_write_cmd(par->client, 401 BIT(4) | (par->device_info->need_chargepump ? BIT(2) : 0)); 402 if (ret < 0) 403 return ret; 404 405 /* Switch to horizontal addressing mode */ 406 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE); 407 if (ret < 0) 408 return ret; 409 410 ret = ssd1307fb_write_cmd(par->client, 411 SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL); 412 if (ret < 0) 413 return ret; 414 415 /* Set column range */ 416 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE); 417 if (ret < 0) 418 return ret; 419 420 ret = ssd1307fb_write_cmd(par->client, 0x0); 421 if (ret < 0) 422 return ret; 423 424 ret = ssd1307fb_write_cmd(par->client, par->width - 1); 425 if (ret < 0) 426 return ret; 427 428 /* Set page range */ 429 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE); 430 if (ret < 0) 431 return ret; 432 433 ret = ssd1307fb_write_cmd(par->client, 0x0); 434 if (ret < 0) 435 return ret; 436 437 ret = ssd1307fb_write_cmd(par->client, 438 par->page_offset + (par->height / 8) - 1); 439 if (ret < 0) 440 return ret; 441 442 /* Turn on the display */ 443 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON); 444 if (ret < 0) 445 return ret; 446 447 return 0; 448 } 449 450 static int ssd1307fb_update_bl(struct backlight_device *bdev) 451 { 452 struct ssd1307fb_par *par = bl_get_data(bdev); 453 int ret; 454 int brightness = bdev->props.brightness; 455 456 par->contrast = brightness; 457 458 ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST); 459 if (ret < 0) 460 return ret; 461 ret = ssd1307fb_write_cmd(par->client, par->contrast); 462 if (ret < 0) 463 return ret; 464 return 0; 465 } 466 467 static int ssd1307fb_get_brightness(struct backlight_device *bdev) 468 { 469 struct ssd1307fb_par *par = bl_get_data(bdev); 470 471 return par->contrast; 472 } 473 474 static int ssd1307fb_check_fb(struct backlight_device *bdev, 475 struct fb_info *info) 476 { 477 return (info->bl_dev == bdev); 478 } 479 480 static const struct backlight_ops ssd1307fb_bl_ops = { 481 .options = BL_CORE_SUSPENDRESUME, 482 .update_status = ssd1307fb_update_bl, 483 .get_brightness = ssd1307fb_get_brightness, 484 .check_fb = ssd1307fb_check_fb, 485 }; 486 487 static struct ssd1307fb_deviceinfo ssd1307fb_ssd1305_deviceinfo = { 488 .default_vcomh = 0x34, 489 .default_dclk_div = 1, 490 .default_dclk_frq = 7, 491 }; 492 493 static struct ssd1307fb_deviceinfo ssd1307fb_ssd1306_deviceinfo = { 494 .default_vcomh = 0x20, 495 .default_dclk_div = 1, 496 .default_dclk_frq = 8, 497 .need_chargepump = 1, 498 }; 499 500 static struct ssd1307fb_deviceinfo ssd1307fb_ssd1307_deviceinfo = { 501 .default_vcomh = 0x20, 502 .default_dclk_div = 2, 503 .default_dclk_frq = 12, 504 .need_pwm = 1, 505 }; 506 507 static struct ssd1307fb_deviceinfo ssd1307fb_ssd1309_deviceinfo = { 508 .default_vcomh = 0x34, 509 .default_dclk_div = 1, 510 .default_dclk_frq = 10, 511 }; 512 513 static const struct of_device_id ssd1307fb_of_match[] = { 514 { 515 .compatible = "solomon,ssd1305fb-i2c", 516 .data = (void *)&ssd1307fb_ssd1305_deviceinfo, 517 }, 518 { 519 .compatible = "solomon,ssd1306fb-i2c", 520 .data = (void *)&ssd1307fb_ssd1306_deviceinfo, 521 }, 522 { 523 .compatible = "solomon,ssd1307fb-i2c", 524 .data = (void *)&ssd1307fb_ssd1307_deviceinfo, 525 }, 526 { 527 .compatible = "solomon,ssd1309fb-i2c", 528 .data = (void *)&ssd1307fb_ssd1309_deviceinfo, 529 }, 530 {}, 531 }; 532 MODULE_DEVICE_TABLE(of, ssd1307fb_of_match); 533 534 static int ssd1307fb_probe(struct i2c_client *client, 535 const struct i2c_device_id *id) 536 { 537 struct backlight_device *bl; 538 char bl_name[12]; 539 struct fb_info *info; 540 struct device_node *node = client->dev.of_node; 541 struct fb_deferred_io *ssd1307fb_defio; 542 u32 vmem_size; 543 struct ssd1307fb_par *par; 544 u8 *vmem; 545 int ret; 546 547 if (!node) { 548 dev_err(&client->dev, "No device tree data found!\n"); 549 return -EINVAL; 550 } 551 552 info = framebuffer_alloc(sizeof(struct ssd1307fb_par), &client->dev); 553 if (!info) { 554 dev_err(&client->dev, "Couldn't allocate framebuffer.\n"); 555 return -ENOMEM; 556 } 557 558 par = info->par; 559 par->info = info; 560 par->client = client; 561 562 par->device_info = (struct ssd1307fb_deviceinfo *)of_match_device( 563 ssd1307fb_of_match, &client->dev)->data; 564 565 par->reset = of_get_named_gpio(client->dev.of_node, 566 "reset-gpios", 0); 567 if (!gpio_is_valid(par->reset)) { 568 ret = -EINVAL; 569 goto fb_alloc_error; 570 } 571 572 if (of_property_read_u32(node, "solomon,width", &par->width)) 573 par->width = 96; 574 575 if (of_property_read_u32(node, "solomon,height", &par->height)) 576 par->height = 16; 577 578 if (of_property_read_u32(node, "solomon,page-offset", &par->page_offset)) 579 par->page_offset = 1; 580 581 if (of_property_read_u32(node, "solomon,com-offset", &par->com_offset)) 582 par->com_offset = 0; 583 584 if (of_property_read_u32(node, "solomon,prechargep1", &par->prechargep1)) 585 par->prechargep1 = 2; 586 587 if (of_property_read_u32(node, "solomon,prechargep2", &par->prechargep2)) 588 par->prechargep2 = 2; 589 590 par->seg_remap = !of_property_read_bool(node, "solomon,segment-no-remap"); 591 par->com_seq = of_property_read_bool(node, "solomon,com-seq"); 592 par->com_lrremap = of_property_read_bool(node, "solomon,com-lrremap"); 593 par->com_invdir = of_property_read_bool(node, "solomon,com-invdir"); 594 595 par->contrast = 127; 596 par->vcomh = par->device_info->default_vcomh; 597 598 /* Setup display timing */ 599 par->dclk_div = par->device_info->default_dclk_div; 600 par->dclk_frq = par->device_info->default_dclk_frq; 601 602 vmem_size = par->width * par->height / 8; 603 604 vmem = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 605 get_order(vmem_size)); 606 if (!vmem) { 607 dev_err(&client->dev, "Couldn't allocate graphical memory.\n"); 608 ret = -ENOMEM; 609 goto fb_alloc_error; 610 } 611 612 ssd1307fb_defio = devm_kzalloc(&client->dev, sizeof(struct fb_deferred_io), GFP_KERNEL); 613 if (!ssd1307fb_defio) { 614 dev_err(&client->dev, "Couldn't allocate deferred io.\n"); 615 ret = -ENOMEM; 616 goto fb_alloc_error; 617 } 618 619 ssd1307fb_defio->delay = HZ / refreshrate; 620 ssd1307fb_defio->deferred_io = ssd1307fb_deferred_io; 621 622 info->fbops = &ssd1307fb_ops; 623 info->fix = ssd1307fb_fix; 624 info->fix.line_length = par->width / 8; 625 info->fbdefio = ssd1307fb_defio; 626 627 info->var = ssd1307fb_var; 628 info->var.xres = par->width; 629 info->var.xres_virtual = par->width; 630 info->var.yres = par->height; 631 info->var.yres_virtual = par->height; 632 633 info->var.red.length = 1; 634 info->var.red.offset = 0; 635 info->var.green.length = 1; 636 info->var.green.offset = 0; 637 info->var.blue.length = 1; 638 info->var.blue.offset = 0; 639 640 info->screen_base = (u8 __force __iomem *)vmem; 641 info->fix.smem_start = __pa(vmem); 642 info->fix.smem_len = vmem_size; 643 644 fb_deferred_io_init(info); 645 646 ret = devm_gpio_request_one(&client->dev, par->reset, 647 GPIOF_OUT_INIT_HIGH, 648 "oled-reset"); 649 if (ret) { 650 dev_err(&client->dev, 651 "failed to request gpio %d: %d\n", 652 par->reset, ret); 653 goto reset_oled_error; 654 } 655 656 i2c_set_clientdata(client, info); 657 658 /* Reset the screen */ 659 gpio_set_value(par->reset, 0); 660 udelay(4); 661 gpio_set_value(par->reset, 1); 662 udelay(4); 663 664 ret = ssd1307fb_init(par); 665 if (ret) 666 goto reset_oled_error; 667 668 ret = register_framebuffer(info); 669 if (ret) { 670 dev_err(&client->dev, "Couldn't register the framebuffer\n"); 671 goto panel_init_error; 672 } 673 674 snprintf(bl_name, sizeof(bl_name), "ssd1307fb%d", info->node); 675 bl = backlight_device_register(bl_name, &client->dev, par, 676 &ssd1307fb_bl_ops, NULL); 677 if (IS_ERR(bl)) { 678 ret = PTR_ERR(bl); 679 dev_err(&client->dev, "unable to register backlight device: %d\n", 680 ret); 681 goto bl_init_error; 682 } 683 684 bl->props.brightness = par->contrast; 685 bl->props.max_brightness = MAX_CONTRAST; 686 info->bl_dev = bl; 687 688 dev_info(&client->dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size); 689 690 return 0; 691 692 bl_init_error: 693 unregister_framebuffer(info); 694 panel_init_error: 695 if (par->device_info->need_pwm) { 696 pwm_disable(par->pwm); 697 pwm_put(par->pwm); 698 }; 699 reset_oled_error: 700 fb_deferred_io_cleanup(info); 701 fb_alloc_error: 702 framebuffer_release(info); 703 return ret; 704 } 705 706 static int ssd1307fb_remove(struct i2c_client *client) 707 { 708 struct fb_info *info = i2c_get_clientdata(client); 709 struct ssd1307fb_par *par = info->par; 710 711 ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_OFF); 712 713 backlight_device_unregister(info->bl_dev); 714 715 unregister_framebuffer(info); 716 if (par->device_info->need_pwm) { 717 pwm_disable(par->pwm); 718 pwm_put(par->pwm); 719 }; 720 fb_deferred_io_cleanup(info); 721 __free_pages(__va(info->fix.smem_start), get_order(info->fix.smem_len)); 722 framebuffer_release(info); 723 724 return 0; 725 } 726 727 static const struct i2c_device_id ssd1307fb_i2c_id[] = { 728 { "ssd1305fb", 0 }, 729 { "ssd1306fb", 0 }, 730 { "ssd1307fb", 0 }, 731 { "ssd1309fb", 0 }, 732 { } 733 }; 734 MODULE_DEVICE_TABLE(i2c, ssd1307fb_i2c_id); 735 736 static struct i2c_driver ssd1307fb_driver = { 737 .probe = ssd1307fb_probe, 738 .remove = ssd1307fb_remove, 739 .id_table = ssd1307fb_i2c_id, 740 .driver = { 741 .name = "ssd1307fb", 742 .of_match_table = ssd1307fb_of_match, 743 }, 744 }; 745 746 module_i2c_driver(ssd1307fb_driver); 747 748 MODULE_DESCRIPTION("FB driver for the Solomon SSD1307 OLED controller"); 749 MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); 750 MODULE_LICENSE("GPL"); 751