1 /* 2 * linux/drivers/video/pm3fb.c -- 3DLabs Permedia3 frame buffer device 3 * 4 * Copyright (C) 2001 Romain Dolbeau <romain@dolbeau.org>. 5 * 6 * Ported to 2.6 kernel on 1 May 2007 by Krzysztof Helt <krzysztof.h1@wp.pl> 7 * based on pm2fb.c 8 * 9 * Based on code written by: 10 * Sven Luther, <luther@dpt-info.u-strasbg.fr> 11 * Alan Hourihane, <alanh@fairlite.demon.co.uk> 12 * Russell King, <rmk@arm.linux.org.uk> 13 * Based on linux/drivers/video/skeletonfb.c: 14 * Copyright (C) 1997 Geert Uytterhoeven 15 * Based on linux/driver/video/pm2fb.c: 16 * Copyright (C) 1998-1999 Ilario Nardinocchi (nardinoc@CS.UniBO.IT) 17 * Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com) 18 * 19 * This file is subject to the terms and conditions of the GNU General Public 20 * License. See the file COPYING in the main directory of this archive for 21 * more details. 22 * 23 */ 24 25 #include <linux/aperture.h> 26 #include <linux/module.h> 27 #include <linux/kernel.h> 28 #include <linux/errno.h> 29 #include <linux/string.h> 30 #include <linux/mm.h> 31 #include <linux/slab.h> 32 #include <linux/delay.h> 33 #include <linux/fb.h> 34 #include <linux/init.h> 35 #include <linux/pci.h> 36 37 #include <video/pm3fb.h> 38 39 #if !defined(CONFIG_PCI) 40 #error "Only generic PCI cards supported." 41 #endif 42 43 #undef PM3FB_MASTER_DEBUG 44 #ifdef PM3FB_MASTER_DEBUG 45 #define DPRINTK(a, b...) \ 46 printk(KERN_DEBUG "pm3fb: %s: " a, __func__ , ## b) 47 #else 48 #define DPRINTK(a, b...) no_printk(a, ##b) 49 #endif 50 51 #define PM3_PIXMAP_SIZE (2048 * 4) 52 53 /* 54 * Driver data 55 */ 56 static int hwcursor = 1; 57 static char *mode_option; 58 static bool noaccel; 59 static bool nomtrr; 60 61 /* 62 * This structure defines the hardware state of the graphics card. Normally 63 * you place this in a header file in linux/include/video. This file usually 64 * also includes register information. That allows other driver subsystems 65 * and userland applications the ability to use the same header file to 66 * avoid duplicate work and easy porting of software. 67 */ 68 struct pm3_par { 69 unsigned char __iomem *v_regs;/* virtual address of p_regs */ 70 u32 video; /* video flags before blanking */ 71 u32 base; /* screen base in 128 bits unit */ 72 u32 palette[16]; 73 int wc_cookie; 74 }; 75 76 /* 77 * Here we define the default structs fb_fix_screeninfo and fb_var_screeninfo 78 * if we don't use modedb. If we do use modedb see pm3fb_init how to use it 79 * to get a fb_var_screeninfo. Otherwise define a default var as well. 80 */ 81 static struct fb_fix_screeninfo pm3fb_fix = { 82 .id = "Permedia3", 83 .type = FB_TYPE_PACKED_PIXELS, 84 .visual = FB_VISUAL_PSEUDOCOLOR, 85 .xpanstep = 1, 86 .ypanstep = 1, 87 .ywrapstep = 0, 88 .accel = FB_ACCEL_3DLABS_PERMEDIA3, 89 }; 90 91 /* 92 * Utility functions 93 */ 94 95 static inline u32 PM3_READ_REG(struct pm3_par *par, s32 off) 96 { 97 return fb_readl(par->v_regs + off); 98 } 99 100 static inline void PM3_WRITE_REG(struct pm3_par *par, s32 off, u32 v) 101 { 102 fb_writel(v, par->v_regs + off); 103 } 104 105 static inline void PM3_WAIT(struct pm3_par *par, u32 n) 106 { 107 while (PM3_READ_REG(par, PM3InFIFOSpace) < n) 108 cpu_relax(); 109 } 110 111 static inline void PM3_WRITE_DAC_REG(struct pm3_par *par, unsigned r, u8 v) 112 { 113 PM3_WAIT(par, 3); 114 PM3_WRITE_REG(par, PM3RD_IndexHigh, (r >> 8) & 0xff); 115 PM3_WRITE_REG(par, PM3RD_IndexLow, r & 0xff); 116 wmb(); 117 PM3_WRITE_REG(par, PM3RD_IndexedData, v); 118 wmb(); 119 } 120 121 static inline void pm3fb_set_color(struct pm3_par *par, unsigned char regno, 122 unsigned char r, unsigned char g, unsigned char b) 123 { 124 PM3_WAIT(par, 4); 125 PM3_WRITE_REG(par, PM3RD_PaletteWriteAddress, regno); 126 wmb(); 127 PM3_WRITE_REG(par, PM3RD_PaletteData, r); 128 wmb(); 129 PM3_WRITE_REG(par, PM3RD_PaletteData, g); 130 wmb(); 131 PM3_WRITE_REG(par, PM3RD_PaletteData, b); 132 wmb(); 133 } 134 135 static void pm3fb_clear_colormap(struct pm3_par *par, 136 unsigned char r, unsigned char g, unsigned char b) 137 { 138 int i; 139 140 for (i = 0; i < 256 ; i++) 141 pm3fb_set_color(par, i, r, g, b); 142 143 } 144 145 /* Calculating various clock parameters */ 146 static void pm3fb_calculate_clock(unsigned long reqclock, 147 unsigned char *prescale, 148 unsigned char *feedback, 149 unsigned char *postscale) 150 { 151 int f, pre, post; 152 unsigned long freq; 153 long freqerr = 1000; 154 long currerr; 155 156 for (f = 1; f < 256; f++) { 157 for (pre = 1; pre < 256; pre++) { 158 for (post = 0; post < 5; post++) { 159 freq = ((2*PM3_REF_CLOCK * f) >> post) / pre; 160 currerr = (reqclock > freq) 161 ? reqclock - freq 162 : freq - reqclock; 163 if (currerr < freqerr) { 164 freqerr = currerr; 165 *feedback = f; 166 *prescale = pre; 167 *postscale = post; 168 } 169 } 170 } 171 } 172 } 173 174 static inline int pm3fb_depth(const struct fb_var_screeninfo *var) 175 { 176 if (var->bits_per_pixel == 16) 177 return var->red.length + var->green.length 178 + var->blue.length; 179 180 return var->bits_per_pixel; 181 } 182 183 static inline int pm3fb_shift_bpp(unsigned bpp, int v) 184 { 185 switch (bpp) { 186 case 8: 187 return (v >> 4); 188 case 16: 189 return (v >> 3); 190 case 32: 191 return (v >> 2); 192 } 193 DPRINTK("Unsupported depth %u\n", bpp); 194 return 0; 195 } 196 197 /* acceleration */ 198 static int pm3fb_sync(struct fb_info *info) 199 { 200 struct pm3_par *par = info->par; 201 202 PM3_WAIT(par, 2); 203 PM3_WRITE_REG(par, PM3FilterMode, PM3FilterModeSync); 204 PM3_WRITE_REG(par, PM3Sync, 0); 205 mb(); 206 do { 207 while ((PM3_READ_REG(par, PM3OutFIFOWords)) == 0) 208 cpu_relax(); 209 } while ((PM3_READ_REG(par, PM3OutputFifo)) != PM3Sync_Tag); 210 211 return 0; 212 } 213 214 static void pm3fb_init_engine(struct fb_info *info) 215 { 216 struct pm3_par *par = info->par; 217 const u32 width = (info->var.xres_virtual + 7) & ~7; 218 219 PM3_WAIT(par, 50); 220 PM3_WRITE_REG(par, PM3FilterMode, PM3FilterModeSync); 221 PM3_WRITE_REG(par, PM3StatisticMode, 0x0); 222 PM3_WRITE_REG(par, PM3DeltaMode, 0x0); 223 PM3_WRITE_REG(par, PM3RasterizerMode, 0x0); 224 PM3_WRITE_REG(par, PM3ScissorMode, 0x0); 225 PM3_WRITE_REG(par, PM3LineStippleMode, 0x0); 226 PM3_WRITE_REG(par, PM3AreaStippleMode, 0x0); 227 PM3_WRITE_REG(par, PM3GIDMode, 0x0); 228 PM3_WRITE_REG(par, PM3DepthMode, 0x0); 229 PM3_WRITE_REG(par, PM3StencilMode, 0x0); 230 PM3_WRITE_REG(par, PM3StencilData, 0x0); 231 PM3_WRITE_REG(par, PM3ColorDDAMode, 0x0); 232 PM3_WRITE_REG(par, PM3TextureCoordMode, 0x0); 233 PM3_WRITE_REG(par, PM3TextureIndexMode0, 0x0); 234 PM3_WRITE_REG(par, PM3TextureIndexMode1, 0x0); 235 PM3_WRITE_REG(par, PM3TextureReadMode, 0x0); 236 PM3_WRITE_REG(par, PM3LUTMode, 0x0); 237 PM3_WRITE_REG(par, PM3TextureFilterMode, 0x0); 238 PM3_WRITE_REG(par, PM3TextureCompositeMode, 0x0); 239 PM3_WRITE_REG(par, PM3TextureApplicationMode, 0x0); 240 PM3_WRITE_REG(par, PM3TextureCompositeColorMode1, 0x0); 241 PM3_WRITE_REG(par, PM3TextureCompositeAlphaMode1, 0x0); 242 PM3_WRITE_REG(par, PM3TextureCompositeColorMode0, 0x0); 243 PM3_WRITE_REG(par, PM3TextureCompositeAlphaMode0, 0x0); 244 PM3_WRITE_REG(par, PM3FogMode, 0x0); 245 PM3_WRITE_REG(par, PM3ChromaTestMode, 0x0); 246 PM3_WRITE_REG(par, PM3AlphaTestMode, 0x0); 247 PM3_WRITE_REG(par, PM3AntialiasMode, 0x0); 248 PM3_WRITE_REG(par, PM3YUVMode, 0x0); 249 PM3_WRITE_REG(par, PM3AlphaBlendColorMode, 0x0); 250 PM3_WRITE_REG(par, PM3AlphaBlendAlphaMode, 0x0); 251 PM3_WRITE_REG(par, PM3DitherMode, 0x0); 252 PM3_WRITE_REG(par, PM3LogicalOpMode, 0x0); 253 PM3_WRITE_REG(par, PM3RouterMode, 0x0); 254 PM3_WRITE_REG(par, PM3Window, 0x0); 255 256 PM3_WRITE_REG(par, PM3Config2D, 0x0); 257 258 PM3_WRITE_REG(par, PM3SpanColorMask, 0xffffffff); 259 260 PM3_WRITE_REG(par, PM3XBias, 0x0); 261 PM3_WRITE_REG(par, PM3YBias, 0x0); 262 PM3_WRITE_REG(par, PM3DeltaControl, 0x0); 263 264 PM3_WRITE_REG(par, PM3BitMaskPattern, 0xffffffff); 265 266 PM3_WRITE_REG(par, PM3FBDestReadEnables, 267 PM3FBDestReadEnables_E(0xff) | 268 PM3FBDestReadEnables_R(0xff) | 269 PM3FBDestReadEnables_ReferenceAlpha(0xff)); 270 PM3_WRITE_REG(par, PM3FBDestReadBufferAddr0, 0x0); 271 PM3_WRITE_REG(par, PM3FBDestReadBufferOffset0, 0x0); 272 PM3_WRITE_REG(par, PM3FBDestReadBufferWidth0, 273 PM3FBDestReadBufferWidth_Width(width)); 274 275 PM3_WRITE_REG(par, PM3FBDestReadMode, 276 PM3FBDestReadMode_ReadEnable | 277 PM3FBDestReadMode_Enable0); 278 PM3_WRITE_REG(par, PM3FBSourceReadBufferAddr, 0x0); 279 PM3_WRITE_REG(par, PM3FBSourceReadBufferOffset, 0x0); 280 PM3_WRITE_REG(par, PM3FBSourceReadBufferWidth, 281 PM3FBSourceReadBufferWidth_Width(width)); 282 PM3_WRITE_REG(par, PM3FBSourceReadMode, 283 PM3FBSourceReadMode_Blocking | 284 PM3FBSourceReadMode_ReadEnable); 285 286 PM3_WAIT(par, 2); 287 { 288 /* invert bits in bitmask */ 289 unsigned long rm = 1 | (3 << 7); 290 switch (info->var.bits_per_pixel) { 291 case 8: 292 PM3_WRITE_REG(par, PM3PixelSize, 293 PM3PixelSize_GLOBAL_8BIT); 294 #ifdef __BIG_ENDIAN 295 rm |= 3 << 15; 296 #endif 297 break; 298 case 16: 299 PM3_WRITE_REG(par, PM3PixelSize, 300 PM3PixelSize_GLOBAL_16BIT); 301 #ifdef __BIG_ENDIAN 302 rm |= 2 << 15; 303 #endif 304 break; 305 case 32: 306 PM3_WRITE_REG(par, PM3PixelSize, 307 PM3PixelSize_GLOBAL_32BIT); 308 break; 309 default: 310 DPRINTK("Unsupported depth %d\n", 311 info->var.bits_per_pixel); 312 break; 313 } 314 PM3_WRITE_REG(par, PM3RasterizerMode, rm); 315 } 316 317 PM3_WAIT(par, 20); 318 PM3_WRITE_REG(par, PM3FBSoftwareWriteMask, 0xffffffff); 319 PM3_WRITE_REG(par, PM3FBHardwareWriteMask, 0xffffffff); 320 PM3_WRITE_REG(par, PM3FBWriteMode, 321 PM3FBWriteMode_WriteEnable | 322 PM3FBWriteMode_OpaqueSpan | 323 PM3FBWriteMode_Enable0); 324 PM3_WRITE_REG(par, PM3FBWriteBufferAddr0, 0x0); 325 PM3_WRITE_REG(par, PM3FBWriteBufferOffset0, 0x0); 326 PM3_WRITE_REG(par, PM3FBWriteBufferWidth0, 327 PM3FBWriteBufferWidth_Width(width)); 328 329 PM3_WRITE_REG(par, PM3SizeOfFramebuffer, 0x0); 330 { 331 /* size in lines of FB */ 332 unsigned long sofb = info->screen_size / 333 info->fix.line_length; 334 if (sofb > 4095) 335 PM3_WRITE_REG(par, PM3SizeOfFramebuffer, 4095); 336 else 337 PM3_WRITE_REG(par, PM3SizeOfFramebuffer, sofb); 338 339 switch (info->var.bits_per_pixel) { 340 case 8: 341 PM3_WRITE_REG(par, PM3DitherMode, 342 (1 << 10) | (2 << 3)); 343 break; 344 case 16: 345 PM3_WRITE_REG(par, PM3DitherMode, 346 (1 << 10) | (1 << 3)); 347 break; 348 case 32: 349 PM3_WRITE_REG(par, PM3DitherMode, 350 (1 << 10) | (0 << 3)); 351 break; 352 default: 353 DPRINTK("Unsupported depth %d\n", 354 info->var.bits_per_pixel); 355 break; 356 } 357 } 358 359 PM3_WRITE_REG(par, PM3dXDom, 0x0); 360 PM3_WRITE_REG(par, PM3dXSub, 0x0); 361 PM3_WRITE_REG(par, PM3dY, 1 << 16); 362 PM3_WRITE_REG(par, PM3StartXDom, 0x0); 363 PM3_WRITE_REG(par, PM3StartXSub, 0x0); 364 PM3_WRITE_REG(par, PM3StartY, 0x0); 365 PM3_WRITE_REG(par, PM3Count, 0x0); 366 367 /* Disable LocalBuffer. better safe than sorry */ 368 PM3_WRITE_REG(par, PM3LBDestReadMode, 0x0); 369 PM3_WRITE_REG(par, PM3LBDestReadEnables, 0x0); 370 PM3_WRITE_REG(par, PM3LBSourceReadMode, 0x0); 371 PM3_WRITE_REG(par, PM3LBWriteMode, 0x0); 372 373 pm3fb_sync(info); 374 } 375 376 static void pm3fb_fillrect(struct fb_info *info, 377 const struct fb_fillrect *region) 378 { 379 struct pm3_par *par = info->par; 380 struct fb_fillrect modded; 381 int vxres, vyres; 382 int rop; 383 u32 color = (info->fix.visual == FB_VISUAL_TRUECOLOR) ? 384 ((u32 *)info->pseudo_palette)[region->color] : region->color; 385 386 if (info->state != FBINFO_STATE_RUNNING) 387 return; 388 if (info->flags & FBINFO_HWACCEL_DISABLED) { 389 cfb_fillrect(info, region); 390 return; 391 } 392 if (region->rop == ROP_COPY ) 393 rop = PM3Config2D_ForegroundROP(0x3); /* GXcopy */ 394 else 395 rop = PM3Config2D_ForegroundROP(0x6) | /* GXxor */ 396 PM3Config2D_FBDestReadEnable; 397 398 vxres = info->var.xres_virtual; 399 vyres = info->var.yres_virtual; 400 401 memcpy(&modded, region, sizeof(struct fb_fillrect)); 402 403 if (!modded.width || !modded.height || 404 modded.dx >= vxres || modded.dy >= vyres) 405 return; 406 407 if (modded.dx + modded.width > vxres) 408 modded.width = vxres - modded.dx; 409 if (modded.dy + modded.height > vyres) 410 modded.height = vyres - modded.dy; 411 412 if (info->var.bits_per_pixel == 8) 413 color |= color << 8; 414 if (info->var.bits_per_pixel <= 16) 415 color |= color << 16; 416 417 PM3_WAIT(par, 4); 418 /* ROP Ox3 is GXcopy */ 419 PM3_WRITE_REG(par, PM3Config2D, 420 PM3Config2D_UseConstantSource | 421 PM3Config2D_ForegroundROPEnable | 422 rop | 423 PM3Config2D_FBWriteEnable); 424 425 PM3_WRITE_REG(par, PM3ForegroundColor, color); 426 427 PM3_WRITE_REG(par, PM3RectanglePosition, 428 PM3RectanglePosition_XOffset(modded.dx) | 429 PM3RectanglePosition_YOffset(modded.dy)); 430 431 PM3_WRITE_REG(par, PM3Render2D, 432 PM3Render2D_XPositive | 433 PM3Render2D_YPositive | 434 PM3Render2D_Operation_Normal | 435 PM3Render2D_SpanOperation | 436 PM3Render2D_Width(modded.width) | 437 PM3Render2D_Height(modded.height)); 438 } 439 440 static void pm3fb_copyarea(struct fb_info *info, 441 const struct fb_copyarea *area) 442 { 443 struct pm3_par *par = info->par; 444 struct fb_copyarea modded; 445 u32 vxres, vyres; 446 int x_align, o_x, o_y; 447 448 if (info->state != FBINFO_STATE_RUNNING) 449 return; 450 if (info->flags & FBINFO_HWACCEL_DISABLED) { 451 cfb_copyarea(info, area); 452 return; 453 } 454 455 memcpy(&modded, area, sizeof(struct fb_copyarea)); 456 457 vxres = info->var.xres_virtual; 458 vyres = info->var.yres_virtual; 459 460 if (!modded.width || !modded.height || 461 modded.sx >= vxres || modded.sy >= vyres || 462 modded.dx >= vxres || modded.dy >= vyres) 463 return; 464 465 if (modded.sx + modded.width > vxres) 466 modded.width = vxres - modded.sx; 467 if (modded.dx + modded.width > vxres) 468 modded.width = vxres - modded.dx; 469 if (modded.sy + modded.height > vyres) 470 modded.height = vyres - modded.sy; 471 if (modded.dy + modded.height > vyres) 472 modded.height = vyres - modded.dy; 473 474 o_x = modded.sx - modded.dx; /*(sx > dx ) ? (sx - dx) : (dx - sx); */ 475 o_y = modded.sy - modded.dy; /*(sy > dy ) ? (sy - dy) : (dy - sy); */ 476 477 x_align = (modded.sx & 0x1f); 478 479 PM3_WAIT(par, 6); 480 481 PM3_WRITE_REG(par, PM3Config2D, 482 PM3Config2D_UserScissorEnable | 483 PM3Config2D_ForegroundROPEnable | 484 PM3Config2D_Blocking | 485 PM3Config2D_ForegroundROP(0x3) | /* Ox3 is GXcopy */ 486 PM3Config2D_FBWriteEnable); 487 488 PM3_WRITE_REG(par, PM3ScissorMinXY, 489 ((modded.dy & 0x0fff) << 16) | (modded.dx & 0x0fff)); 490 PM3_WRITE_REG(par, PM3ScissorMaxXY, 491 (((modded.dy + modded.height) & 0x0fff) << 16) | 492 ((modded.dx + modded.width) & 0x0fff)); 493 494 PM3_WRITE_REG(par, PM3FBSourceReadBufferOffset, 495 PM3FBSourceReadBufferOffset_XOffset(o_x) | 496 PM3FBSourceReadBufferOffset_YOffset(o_y)); 497 498 PM3_WRITE_REG(par, PM3RectanglePosition, 499 PM3RectanglePosition_XOffset(modded.dx - x_align) | 500 PM3RectanglePosition_YOffset(modded.dy)); 501 502 PM3_WRITE_REG(par, PM3Render2D, 503 ((modded.sx > modded.dx) ? PM3Render2D_XPositive : 0) | 504 ((modded.sy > modded.dy) ? PM3Render2D_YPositive : 0) | 505 PM3Render2D_Operation_Normal | 506 PM3Render2D_SpanOperation | 507 PM3Render2D_FBSourceReadEnable | 508 PM3Render2D_Width(modded.width + x_align) | 509 PM3Render2D_Height(modded.height)); 510 } 511 512 static void pm3fb_imageblit(struct fb_info *info, const struct fb_image *image) 513 { 514 struct pm3_par *par = info->par; 515 u32 height = image->height; 516 u32 fgx, bgx; 517 const u32 *src = (const u32 *)image->data; 518 519 if (info->state != FBINFO_STATE_RUNNING) 520 return; 521 if (info->flags & FBINFO_HWACCEL_DISABLED) { 522 cfb_imageblit(info, image); 523 return; 524 } 525 switch (info->fix.visual) { 526 case FB_VISUAL_PSEUDOCOLOR: 527 fgx = image->fg_color; 528 bgx = image->bg_color; 529 break; 530 case FB_VISUAL_TRUECOLOR: 531 default: 532 fgx = par->palette[image->fg_color]; 533 bgx = par->palette[image->bg_color]; 534 break; 535 } 536 if (image->depth != 1) { 537 cfb_imageblit(info, image); 538 return; 539 } 540 541 if (info->var.bits_per_pixel == 8) { 542 fgx |= fgx << 8; 543 bgx |= bgx << 8; 544 } 545 if (info->var.bits_per_pixel <= 16) { 546 fgx |= fgx << 16; 547 bgx |= bgx << 16; 548 } 549 550 PM3_WAIT(par, 7); 551 552 PM3_WRITE_REG(par, PM3ForegroundColor, fgx); 553 PM3_WRITE_REG(par, PM3BackgroundColor, bgx); 554 555 /* ROP Ox3 is GXcopy */ 556 PM3_WRITE_REG(par, PM3Config2D, 557 PM3Config2D_UserScissorEnable | 558 PM3Config2D_UseConstantSource | 559 PM3Config2D_ForegroundROPEnable | 560 PM3Config2D_ForegroundROP(0x3) | 561 PM3Config2D_OpaqueSpan | 562 PM3Config2D_FBWriteEnable); 563 PM3_WRITE_REG(par, PM3ScissorMinXY, 564 ((image->dy & 0x0fff) << 16) | (image->dx & 0x0fff)); 565 PM3_WRITE_REG(par, PM3ScissorMaxXY, 566 (((image->dy + image->height) & 0x0fff) << 16) | 567 ((image->dx + image->width) & 0x0fff)); 568 PM3_WRITE_REG(par, PM3RectanglePosition, 569 PM3RectanglePosition_XOffset(image->dx) | 570 PM3RectanglePosition_YOffset(image->dy)); 571 PM3_WRITE_REG(par, PM3Render2D, 572 PM3Render2D_XPositive | 573 PM3Render2D_YPositive | 574 PM3Render2D_Operation_SyncOnBitMask | 575 PM3Render2D_SpanOperation | 576 PM3Render2D_Width(image->width) | 577 PM3Render2D_Height(image->height)); 578 579 580 while (height--) { 581 int width = ((image->width + 7) >> 3) 582 + info->pixmap.scan_align - 1; 583 width >>= 2; 584 585 while (width >= PM3_FIFO_SIZE) { 586 int i = PM3_FIFO_SIZE - 1; 587 588 PM3_WAIT(par, PM3_FIFO_SIZE); 589 while (i--) { 590 PM3_WRITE_REG(par, PM3BitMaskPattern, *src); 591 src++; 592 } 593 width -= PM3_FIFO_SIZE - 1; 594 } 595 596 PM3_WAIT(par, width + 1); 597 while (width--) { 598 PM3_WRITE_REG(par, PM3BitMaskPattern, *src); 599 src++; 600 } 601 } 602 } 603 /* end of acceleration functions */ 604 605 /* 606 * Hardware Cursor support. 607 */ 608 static const u8 cursor_bits_lookup[16] = { 609 0x00, 0x40, 0x10, 0x50, 0x04, 0x44, 0x14, 0x54, 610 0x01, 0x41, 0x11, 0x51, 0x05, 0x45, 0x15, 0x55 611 }; 612 613 static int pm3fb_cursor(struct fb_info *info, struct fb_cursor *cursor) 614 { 615 struct pm3_par *par = info->par; 616 u8 mode; 617 618 if (!hwcursor) 619 return -EINVAL; /* just to force soft_cursor() call */ 620 621 /* Too large of a cursor or wrong bpp :-( */ 622 if (cursor->image.width > 64 || 623 cursor->image.height > 64 || 624 cursor->image.depth > 1) 625 return -EINVAL; 626 627 mode = PM3RD_CursorMode_TYPE_X; 628 if (cursor->enable) 629 mode |= PM3RD_CursorMode_CURSOR_ENABLE; 630 631 PM3_WRITE_DAC_REG(par, PM3RD_CursorMode, mode); 632 633 /* 634 * If the cursor is not be changed this means either we want the 635 * current cursor state (if enable is set) or we want to query what 636 * we can do with the cursor (if enable is not set) 637 */ 638 if (!cursor->set) 639 return 0; 640 641 if (cursor->set & FB_CUR_SETPOS) { 642 int x = cursor->image.dx - info->var.xoffset; 643 int y = cursor->image.dy - info->var.yoffset; 644 645 PM3_WRITE_DAC_REG(par, PM3RD_CursorXLow, x & 0xff); 646 PM3_WRITE_DAC_REG(par, PM3RD_CursorXHigh, (x >> 8) & 0xf); 647 PM3_WRITE_DAC_REG(par, PM3RD_CursorYLow, y & 0xff); 648 PM3_WRITE_DAC_REG(par, PM3RD_CursorYHigh, (y >> 8) & 0xf); 649 } 650 651 if (cursor->set & FB_CUR_SETHOT) { 652 PM3_WRITE_DAC_REG(par, PM3RD_CursorHotSpotX, 653 cursor->hot.x & 0x3f); 654 PM3_WRITE_DAC_REG(par, PM3RD_CursorHotSpotY, 655 cursor->hot.y & 0x3f); 656 } 657 658 if (cursor->set & FB_CUR_SETCMAP) { 659 u32 fg_idx = cursor->image.fg_color; 660 u32 bg_idx = cursor->image.bg_color; 661 struct fb_cmap cmap = info->cmap; 662 663 /* the X11 driver says one should use these color registers */ 664 PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(39), 665 cmap.red[fg_idx] >> 8 ); 666 PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(40), 667 cmap.green[fg_idx] >> 8 ); 668 PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(41), 669 cmap.blue[fg_idx] >> 8 ); 670 671 PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(42), 672 cmap.red[bg_idx] >> 8 ); 673 PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(43), 674 cmap.green[bg_idx] >> 8 ); 675 PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(44), 676 cmap.blue[bg_idx] >> 8 ); 677 } 678 679 if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) { 680 u8 *bitmap = (u8 *)cursor->image.data; 681 u8 *mask = (u8 *)cursor->mask; 682 int i; 683 int pos = PM3RD_CursorPattern(0); 684 685 for (i = 0; i < cursor->image.height; i++) { 686 int j = (cursor->image.width + 7) >> 3; 687 int k = 8 - j; 688 689 for (; j > 0; j--) { 690 u8 data = *bitmap ^ *mask; 691 692 if (cursor->rop == ROP_COPY) 693 data = *mask & *bitmap; 694 /* Upper 4 bits of bitmap data */ 695 PM3_WRITE_DAC_REG(par, pos++, 696 cursor_bits_lookup[data >> 4] | 697 (cursor_bits_lookup[*mask >> 4] << 1)); 698 /* Lower 4 bits of bitmap */ 699 PM3_WRITE_DAC_REG(par, pos++, 700 cursor_bits_lookup[data & 0xf] | 701 (cursor_bits_lookup[*mask & 0xf] << 1)); 702 bitmap++; 703 mask++; 704 } 705 for (; k > 0; k--) { 706 PM3_WRITE_DAC_REG(par, pos++, 0); 707 PM3_WRITE_DAC_REG(par, pos++, 0); 708 } 709 } 710 while (pos < PM3RD_CursorPattern(1024)) 711 PM3_WRITE_DAC_REG(par, pos++, 0); 712 } 713 return 0; 714 } 715 716 /* write the mode to registers */ 717 static void pm3fb_write_mode(struct fb_info *info) 718 { 719 struct pm3_par *par = info->par; 720 char tempsync = 0x00; 721 char tempmisc = 0x00; 722 const u32 hsstart = info->var.right_margin; 723 const u32 hsend = hsstart + info->var.hsync_len; 724 const u32 hbend = hsend + info->var.left_margin; 725 const u32 xres = (info->var.xres + 31) & ~31; 726 const u32 htotal = xres + hbend; 727 const u32 vsstart = info->var.lower_margin; 728 const u32 vsend = vsstart + info->var.vsync_len; 729 const u32 vbend = vsend + info->var.upper_margin; 730 const u32 vtotal = info->var.yres + vbend; 731 const u32 width = (info->var.xres_virtual + 7) & ~7; 732 const unsigned bpp = info->var.bits_per_pixel; 733 734 PM3_WAIT(par, 20); 735 PM3_WRITE_REG(par, PM3MemBypassWriteMask, 0xffffffff); 736 PM3_WRITE_REG(par, PM3Aperture0, 0x00000000); 737 PM3_WRITE_REG(par, PM3Aperture1, 0x00000000); 738 PM3_WRITE_REG(par, PM3FIFODis, 0x00000007); 739 740 PM3_WRITE_REG(par, PM3HTotal, 741 pm3fb_shift_bpp(bpp, htotal - 1)); 742 PM3_WRITE_REG(par, PM3HsEnd, 743 pm3fb_shift_bpp(bpp, hsend)); 744 PM3_WRITE_REG(par, PM3HsStart, 745 pm3fb_shift_bpp(bpp, hsstart)); 746 PM3_WRITE_REG(par, PM3HbEnd, 747 pm3fb_shift_bpp(bpp, hbend)); 748 PM3_WRITE_REG(par, PM3HgEnd, 749 pm3fb_shift_bpp(bpp, hbend)); 750 PM3_WRITE_REG(par, PM3ScreenStride, 751 pm3fb_shift_bpp(bpp, width)); 752 PM3_WRITE_REG(par, PM3VTotal, vtotal - 1); 753 PM3_WRITE_REG(par, PM3VsEnd, vsend - 1); 754 PM3_WRITE_REG(par, PM3VsStart, vsstart - 1); 755 PM3_WRITE_REG(par, PM3VbEnd, vbend); 756 757 switch (bpp) { 758 case 8: 759 PM3_WRITE_REG(par, PM3ByAperture1Mode, 760 PM3ByApertureMode_PIXELSIZE_8BIT); 761 PM3_WRITE_REG(par, PM3ByAperture2Mode, 762 PM3ByApertureMode_PIXELSIZE_8BIT); 763 break; 764 765 case 16: 766 #ifndef __BIG_ENDIAN 767 PM3_WRITE_REG(par, PM3ByAperture1Mode, 768 PM3ByApertureMode_PIXELSIZE_16BIT); 769 PM3_WRITE_REG(par, PM3ByAperture2Mode, 770 PM3ByApertureMode_PIXELSIZE_16BIT); 771 #else 772 PM3_WRITE_REG(par, PM3ByAperture1Mode, 773 PM3ByApertureMode_PIXELSIZE_16BIT | 774 PM3ByApertureMode_BYTESWAP_BADC); 775 PM3_WRITE_REG(par, PM3ByAperture2Mode, 776 PM3ByApertureMode_PIXELSIZE_16BIT | 777 PM3ByApertureMode_BYTESWAP_BADC); 778 #endif /* ! __BIG_ENDIAN */ 779 break; 780 781 case 32: 782 #ifndef __BIG_ENDIAN 783 PM3_WRITE_REG(par, PM3ByAperture1Mode, 784 PM3ByApertureMode_PIXELSIZE_32BIT); 785 PM3_WRITE_REG(par, PM3ByAperture2Mode, 786 PM3ByApertureMode_PIXELSIZE_32BIT); 787 #else 788 PM3_WRITE_REG(par, PM3ByAperture1Mode, 789 PM3ByApertureMode_PIXELSIZE_32BIT | 790 PM3ByApertureMode_BYTESWAP_DCBA); 791 PM3_WRITE_REG(par, PM3ByAperture2Mode, 792 PM3ByApertureMode_PIXELSIZE_32BIT | 793 PM3ByApertureMode_BYTESWAP_DCBA); 794 #endif /* ! __BIG_ENDIAN */ 795 break; 796 797 default: 798 DPRINTK("Unsupported depth %d\n", bpp); 799 break; 800 } 801 802 /* 803 * Oxygen VX1 - it appears that setting PM3VideoControl and 804 * then PM3RD_SyncControl to the same SYNC settings undoes 805 * any net change - they seem to xor together. Only set the 806 * sync options in PM3RD_SyncControl. --rmk 807 */ 808 { 809 unsigned int video = par->video; 810 811 video &= ~(PM3VideoControl_HSYNC_MASK | 812 PM3VideoControl_VSYNC_MASK); 813 video |= PM3VideoControl_HSYNC_ACTIVE_HIGH | 814 PM3VideoControl_VSYNC_ACTIVE_HIGH; 815 PM3_WRITE_REG(par, PM3VideoControl, video); 816 } 817 PM3_WRITE_REG(par, PM3VClkCtl, 818 (PM3_READ_REG(par, PM3VClkCtl) & 0xFFFFFFFC)); 819 PM3_WRITE_REG(par, PM3ScreenBase, par->base); 820 PM3_WRITE_REG(par, PM3ChipConfig, 821 (PM3_READ_REG(par, PM3ChipConfig) & 0xFFFFFFFD)); 822 823 wmb(); 824 { 825 unsigned char m; /* ClkPreScale */ 826 unsigned char n; /* ClkFeedBackScale */ 827 unsigned char p; /* ClkPostScale */ 828 unsigned long pixclock = PICOS2KHZ(info->var.pixclock); 829 830 (void)pm3fb_calculate_clock(pixclock, &m, &n, &p); 831 832 DPRINTK("Pixclock: %ld, Pre: %d, Feedback: %d, Post: %d\n", 833 pixclock, (int) m, (int) n, (int) p); 834 835 PM3_WRITE_DAC_REG(par, PM3RD_DClk0PreScale, m); 836 PM3_WRITE_DAC_REG(par, PM3RD_DClk0FeedbackScale, n); 837 PM3_WRITE_DAC_REG(par, PM3RD_DClk0PostScale, p); 838 } 839 /* 840 PM3_WRITE_DAC_REG(par, PM3RD_IndexControl, 0x00); 841 */ 842 /* 843 PM3_SLOW_WRITE_REG(par, PM3RD_IndexControl, 0x00); 844 */ 845 if ((par->video & PM3VideoControl_HSYNC_MASK) == 846 PM3VideoControl_HSYNC_ACTIVE_HIGH) 847 tempsync |= PM3RD_SyncControl_HSYNC_ACTIVE_HIGH; 848 if ((par->video & PM3VideoControl_VSYNC_MASK) == 849 PM3VideoControl_VSYNC_ACTIVE_HIGH) 850 tempsync |= PM3RD_SyncControl_VSYNC_ACTIVE_HIGH; 851 852 PM3_WRITE_DAC_REG(par, PM3RD_SyncControl, tempsync); 853 DPRINTK("PM3RD_SyncControl: %d\n", tempsync); 854 855 PM3_WRITE_DAC_REG(par, PM3RD_DACControl, 0x00); 856 857 switch (pm3fb_depth(&info->var)) { 858 case 8: 859 PM3_WRITE_DAC_REG(par, PM3RD_PixelSize, 860 PM3RD_PixelSize_8_BIT_PIXELS); 861 PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat, 862 PM3RD_ColorFormat_CI8_COLOR | 863 PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW); 864 tempmisc |= PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE; 865 break; 866 case 12: 867 PM3_WRITE_DAC_REG(par, PM3RD_PixelSize, 868 PM3RD_PixelSize_16_BIT_PIXELS); 869 PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat, 870 PM3RD_ColorFormat_4444_COLOR | 871 PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW | 872 PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE); 873 tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE | 874 PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE; 875 break; 876 case 15: 877 PM3_WRITE_DAC_REG(par, PM3RD_PixelSize, 878 PM3RD_PixelSize_16_BIT_PIXELS); 879 PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat, 880 PM3RD_ColorFormat_5551_FRONT_COLOR | 881 PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW | 882 PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE); 883 tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE | 884 PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE; 885 break; 886 case 16: 887 PM3_WRITE_DAC_REG(par, PM3RD_PixelSize, 888 PM3RD_PixelSize_16_BIT_PIXELS); 889 PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat, 890 PM3RD_ColorFormat_565_FRONT_COLOR | 891 PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW | 892 PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE); 893 tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE | 894 PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE; 895 break; 896 case 32: 897 PM3_WRITE_DAC_REG(par, PM3RD_PixelSize, 898 PM3RD_PixelSize_32_BIT_PIXELS); 899 PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat, 900 PM3RD_ColorFormat_8888_COLOR | 901 PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW); 902 tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE | 903 PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE; 904 break; 905 } 906 PM3_WRITE_DAC_REG(par, PM3RD_MiscControl, tempmisc); 907 } 908 909 /* 910 * hardware independent functions 911 */ 912 static int pm3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) 913 { 914 u32 lpitch; 915 unsigned bpp = var->red.length + var->green.length 916 + var->blue.length + var->transp.length; 917 918 if (bpp != var->bits_per_pixel) { 919 /* set predefined mode for bits_per_pixel settings */ 920 921 switch (var->bits_per_pixel) { 922 case 8: 923 var->red.length = 8; 924 var->green.length = 8; 925 var->blue.length = 8; 926 var->red.offset = 0; 927 var->green.offset = 0; 928 var->blue.offset = 0; 929 var->transp.offset = 0; 930 var->transp.length = 0; 931 break; 932 case 16: 933 var->red.length = 5; 934 var->blue.length = 5; 935 var->green.length = 6; 936 var->transp.length = 0; 937 break; 938 case 32: 939 var->red.length = 8; 940 var->green.length = 8; 941 var->blue.length = 8; 942 var->transp.length = 8; 943 break; 944 default: 945 DPRINTK("depth not supported: %u\n", 946 var->bits_per_pixel); 947 return -EINVAL; 948 } 949 } 950 /* it is assumed BGRA order */ 951 if (var->bits_per_pixel > 8 ) { 952 var->blue.offset = 0; 953 var->green.offset = var->blue.length; 954 var->red.offset = var->green.offset + var->green.length; 955 var->transp.offset = var->red.offset + var->red.length; 956 } 957 var->height = -1; 958 var->width = -1; 959 960 if (var->xres != var->xres_virtual) { 961 DPRINTK("virtual x resolution != " 962 "physical x resolution not supported\n"); 963 return -EINVAL; 964 } 965 966 if (var->yres > var->yres_virtual) { 967 DPRINTK("virtual y resolution < " 968 "physical y resolution not possible\n"); 969 return -EINVAL; 970 } 971 972 if (var->xoffset) { 973 DPRINTK("xoffset not supported\n"); 974 return -EINVAL; 975 } 976 977 if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) { 978 DPRINTK("interlace not supported\n"); 979 return -EINVAL; 980 } 981 982 var->xres = (var->xres + 31) & ~31; /* could sometimes be 8 */ 983 lpitch = var->xres * ((var->bits_per_pixel + 7) >> 3); 984 985 if (var->xres < 200 || var->xres > 2048) { 986 DPRINTK("width not supported: %u\n", var->xres); 987 return -EINVAL; 988 } 989 990 if (var->yres < 200 || var->yres > 4095) { 991 DPRINTK("height not supported: %u\n", var->yres); 992 return -EINVAL; 993 } 994 995 if (lpitch * var->yres_virtual > info->fix.smem_len) { 996 DPRINTK("no memory for screen (%ux%ux%u)\n", 997 var->xres, var->yres_virtual, var->bits_per_pixel); 998 return -EINVAL; 999 } 1000 1001 if (PICOS2KHZ(var->pixclock) > PM3_MAX_PIXCLOCK) { 1002 DPRINTK("pixclock too high (%ldKHz)\n", 1003 PICOS2KHZ(var->pixclock)); 1004 return -EINVAL; 1005 } 1006 1007 var->accel_flags = 0; /* Can't mmap if this is on */ 1008 1009 DPRINTK("Checking graphics mode at %dx%d depth %d\n", 1010 var->xres, var->yres, var->bits_per_pixel); 1011 return 0; 1012 } 1013 1014 static int pm3fb_set_par(struct fb_info *info) 1015 { 1016 struct pm3_par *par = info->par; 1017 const u32 xres = (info->var.xres + 31) & ~31; 1018 const unsigned bpp = info->var.bits_per_pixel; 1019 1020 par->base = pm3fb_shift_bpp(bpp, (info->var.yoffset * xres) 1021 + info->var.xoffset); 1022 par->video = 0; 1023 1024 if (info->var.sync & FB_SYNC_HOR_HIGH_ACT) 1025 par->video |= PM3VideoControl_HSYNC_ACTIVE_HIGH; 1026 else 1027 par->video |= PM3VideoControl_HSYNC_ACTIVE_LOW; 1028 1029 if (info->var.sync & FB_SYNC_VERT_HIGH_ACT) 1030 par->video |= PM3VideoControl_VSYNC_ACTIVE_HIGH; 1031 else 1032 par->video |= PM3VideoControl_VSYNC_ACTIVE_LOW; 1033 1034 if ((info->var.vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE) 1035 par->video |= PM3VideoControl_LINE_DOUBLE_ON; 1036 1037 if ((info->var.activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) 1038 par->video |= PM3VideoControl_ENABLE; 1039 else 1040 DPRINTK("PM3Video disabled\n"); 1041 1042 switch (bpp) { 1043 case 8: 1044 par->video |= PM3VideoControl_PIXELSIZE_8BIT; 1045 break; 1046 case 16: 1047 par->video |= PM3VideoControl_PIXELSIZE_16BIT; 1048 break; 1049 case 32: 1050 par->video |= PM3VideoControl_PIXELSIZE_32BIT; 1051 break; 1052 default: 1053 DPRINTK("Unsupported depth\n"); 1054 break; 1055 } 1056 1057 info->fix.visual = 1058 (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; 1059 info->fix.line_length = ((info->var.xres_virtual + 7) >> 3) * bpp; 1060 1061 /* pm3fb_clear_memory(info, 0);*/ 1062 pm3fb_clear_colormap(par, 0, 0, 0); 1063 PM3_WRITE_DAC_REG(par, PM3RD_CursorMode, 0); 1064 pm3fb_init_engine(info); 1065 pm3fb_write_mode(info); 1066 return 0; 1067 } 1068 1069 static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green, 1070 unsigned blue, unsigned transp, 1071 struct fb_info *info) 1072 { 1073 struct pm3_par *par = info->par; 1074 1075 if (regno >= 256) /* no. of hw registers */ 1076 return -EINVAL; 1077 1078 /* grayscale works only partially under directcolor */ 1079 /* grayscale = 0.30*R + 0.59*G + 0.11*B */ 1080 if (info->var.grayscale) 1081 red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; 1082 1083 /* Directcolor: 1084 * var->{color}.offset contains start of bitfield 1085 * var->{color}.length contains length of bitfield 1086 * {hardwarespecific} contains width of DAC 1087 * pseudo_palette[X] is programmed to (X << red.offset) | 1088 * (X << green.offset) | 1089 * (X << blue.offset) 1090 * RAMDAC[X] is programmed to (red, green, blue) 1091 * color depth = SUM(var->{color}.length) 1092 * 1093 * Pseudocolor: 1094 * var->{color}.offset is 0 1095 * var->{color}.length contains width of DAC or the number 1096 * of unique colors available (color depth) 1097 * pseudo_palette is not used 1098 * RAMDAC[X] is programmed to (red, green, blue) 1099 * color depth = var->{color}.length 1100 */ 1101 1102 /* 1103 * This is the point where the color is converted to something that 1104 * is acceptable by the hardware. 1105 */ 1106 #define CNVT_TOHW(val, width) ((((val) << (width)) + 0x7FFF - (val)) >> 16) 1107 red = CNVT_TOHW(red, info->var.red.length); 1108 green = CNVT_TOHW(green, info->var.green.length); 1109 blue = CNVT_TOHW(blue, info->var.blue.length); 1110 transp = CNVT_TOHW(transp, info->var.transp.length); 1111 #undef CNVT_TOHW 1112 1113 if (info->fix.visual == FB_VISUAL_TRUECOLOR || 1114 info->fix.visual == FB_VISUAL_DIRECTCOLOR) { 1115 u32 v; 1116 1117 if (regno >= 16) 1118 return -EINVAL; 1119 1120 v = (red << info->var.red.offset) | 1121 (green << info->var.green.offset) | 1122 (blue << info->var.blue.offset) | 1123 (transp << info->var.transp.offset); 1124 1125 switch (info->var.bits_per_pixel) { 1126 case 8: 1127 break; 1128 case 16: 1129 case 32: 1130 ((u32 *)(info->pseudo_palette))[regno] = v; 1131 break; 1132 } 1133 return 0; 1134 } else if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR) 1135 pm3fb_set_color(par, regno, red, green, blue); 1136 1137 return 0; 1138 } 1139 1140 static int pm3fb_pan_display(struct fb_var_screeninfo *var, 1141 struct fb_info *info) 1142 { 1143 struct pm3_par *par = info->par; 1144 const u32 xres = (info->var.xres + 31) & ~31; 1145 1146 par->base = pm3fb_shift_bpp(info->var.bits_per_pixel, 1147 (var->yoffset * xres) 1148 + var->xoffset); 1149 PM3_WAIT(par, 1); 1150 PM3_WRITE_REG(par, PM3ScreenBase, par->base); 1151 return 0; 1152 } 1153 1154 static int pm3fb_blank(int blank_mode, struct fb_info *info) 1155 { 1156 struct pm3_par *par = info->par; 1157 u32 video = par->video; 1158 1159 /* 1160 * Oxygen VX1 - it appears that setting PM3VideoControl and 1161 * then PM3RD_SyncControl to the same SYNC settings undoes 1162 * any net change - they seem to xor together. Only set the 1163 * sync options in PM3RD_SyncControl. --rmk 1164 */ 1165 video &= ~(PM3VideoControl_HSYNC_MASK | 1166 PM3VideoControl_VSYNC_MASK); 1167 video |= PM3VideoControl_HSYNC_ACTIVE_HIGH | 1168 PM3VideoControl_VSYNC_ACTIVE_HIGH; 1169 1170 switch (blank_mode) { 1171 case FB_BLANK_UNBLANK: 1172 video |= PM3VideoControl_ENABLE; 1173 break; 1174 case FB_BLANK_NORMAL: 1175 video &= ~PM3VideoControl_ENABLE; 1176 break; 1177 case FB_BLANK_HSYNC_SUSPEND: 1178 video &= ~(PM3VideoControl_HSYNC_MASK | 1179 PM3VideoControl_BLANK_ACTIVE_LOW); 1180 break; 1181 case FB_BLANK_VSYNC_SUSPEND: 1182 video &= ~(PM3VideoControl_VSYNC_MASK | 1183 PM3VideoControl_BLANK_ACTIVE_LOW); 1184 break; 1185 case FB_BLANK_POWERDOWN: 1186 video &= ~(PM3VideoControl_HSYNC_MASK | 1187 PM3VideoControl_VSYNC_MASK | 1188 PM3VideoControl_BLANK_ACTIVE_LOW); 1189 break; 1190 default: 1191 DPRINTK("Unsupported blanking %d\n", blank_mode); 1192 return 1; 1193 } 1194 1195 PM3_WAIT(par, 1); 1196 PM3_WRITE_REG(par, PM3VideoControl, video); 1197 return 0; 1198 } 1199 1200 /* 1201 * Frame buffer operations 1202 */ 1203 1204 static const struct fb_ops pm3fb_ops = { 1205 .owner = THIS_MODULE, 1206 .fb_check_var = pm3fb_check_var, 1207 .fb_set_par = pm3fb_set_par, 1208 .fb_setcolreg = pm3fb_setcolreg, 1209 .fb_pan_display = pm3fb_pan_display, 1210 .fb_fillrect = pm3fb_fillrect, 1211 .fb_copyarea = pm3fb_copyarea, 1212 .fb_imageblit = pm3fb_imageblit, 1213 .fb_blank = pm3fb_blank, 1214 .fb_sync = pm3fb_sync, 1215 .fb_cursor = pm3fb_cursor, 1216 }; 1217 1218 /* ------------------------------------------------------------------------- */ 1219 1220 /* 1221 * Initialization 1222 */ 1223 1224 /* mmio register are already mapped when this function is called */ 1225 /* the pm3fb_fix.smem_start is also set */ 1226 static unsigned long pm3fb_size_memory(struct pm3_par *par) 1227 { 1228 unsigned long memsize = 0; 1229 unsigned long tempBypass, i, temp1, temp2; 1230 unsigned char __iomem *screen_mem; 1231 1232 pm3fb_fix.smem_len = 64 * 1024l * 1024; /* request full aperture size */ 1233 /* Linear frame buffer - request region and map it. */ 1234 if (!request_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len, 1235 "pm3fb smem")) { 1236 printk(KERN_WARNING "pm3fb: Can't reserve smem.\n"); 1237 return 0; 1238 } 1239 screen_mem = 1240 ioremap(pm3fb_fix.smem_start, pm3fb_fix.smem_len); 1241 if (!screen_mem) { 1242 printk(KERN_WARNING "pm3fb: Can't ioremap smem area.\n"); 1243 release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len); 1244 return 0; 1245 } 1246 1247 /* TODO: card-specific stuff, *before* accessing *any* FB memory */ 1248 /* For Appian Jeronimo 2000 board second head */ 1249 1250 tempBypass = PM3_READ_REG(par, PM3MemBypassWriteMask); 1251 1252 DPRINTK("PM3MemBypassWriteMask was: 0x%08lx\n", tempBypass); 1253 1254 PM3_WAIT(par, 1); 1255 PM3_WRITE_REG(par, PM3MemBypassWriteMask, 0xFFFFFFFF); 1256 1257 /* pm3 split up memory, replicates, and do a lot of 1258 * nasty stuff IMHO ;-) 1259 */ 1260 for (i = 0; i < 32; i++) { 1261 fb_writel(i * 0x00345678, 1262 (screen_mem + (i * 1048576))); 1263 mb(); 1264 temp1 = fb_readl((screen_mem + (i * 1048576))); 1265 1266 /* Let's check for wrapover, write will fail at 16MB boundary */ 1267 if (temp1 == (i * 0x00345678)) 1268 memsize = i; 1269 else 1270 break; 1271 } 1272 1273 DPRINTK("First detect pass already got %ld MB\n", memsize + 1); 1274 1275 if (memsize + 1 == i) { 1276 for (i = 0; i < 32; i++) { 1277 /* Clear first 32MB ; 0 is 0, no need to byteswap */ 1278 writel(0x0000000, (screen_mem + (i * 1048576))); 1279 } 1280 wmb(); 1281 1282 for (i = 32; i < 64; i++) { 1283 fb_writel(i * 0x00345678, 1284 (screen_mem + (i * 1048576))); 1285 mb(); 1286 temp1 = 1287 fb_readl((screen_mem + (i * 1048576))); 1288 temp2 = 1289 fb_readl((screen_mem + ((i - 32) * 1048576))); 1290 /* different value, different RAM... */ 1291 if ((temp1 == (i * 0x00345678)) && (temp2 == 0)) 1292 memsize = i; 1293 else 1294 break; 1295 } 1296 } 1297 DPRINTK("Second detect pass got %ld MB\n", memsize + 1); 1298 1299 PM3_WAIT(par, 1); 1300 PM3_WRITE_REG(par, PM3MemBypassWriteMask, tempBypass); 1301 1302 iounmap(screen_mem); 1303 release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len); 1304 memsize = 1048576 * (memsize + 1); 1305 1306 DPRINTK("Returning 0x%08lx bytes\n", memsize); 1307 1308 return memsize; 1309 } 1310 1311 static int pm3fb_probe(struct pci_dev *dev, const struct pci_device_id *ent) 1312 { 1313 struct fb_info *info; 1314 struct pm3_par *par; 1315 struct device *device = &dev->dev; /* for pci drivers */ 1316 int err; 1317 int retval = -ENXIO; 1318 1319 err = aperture_remove_conflicting_pci_devices(dev, "pm3fb"); 1320 if (err) 1321 return err; 1322 1323 err = pci_enable_device(dev); 1324 if (err) { 1325 printk(KERN_WARNING "pm3fb: Can't enable PCI dev: %d\n", err); 1326 return err; 1327 } 1328 /* 1329 * Dynamically allocate info and par 1330 */ 1331 info = framebuffer_alloc(sizeof(struct pm3_par), device); 1332 1333 if (!info) 1334 return -ENOMEM; 1335 par = info->par; 1336 1337 /* 1338 * Here we set the screen_base to the virtual memory address 1339 * for the framebuffer. 1340 */ 1341 pm3fb_fix.mmio_start = pci_resource_start(dev, 0); 1342 pm3fb_fix.mmio_len = PM3_REGS_SIZE; 1343 #if defined(__BIG_ENDIAN) 1344 pm3fb_fix.mmio_start += PM3_REGS_SIZE; 1345 DPRINTK("Adjusting register base for big-endian.\n"); 1346 #endif 1347 1348 /* Registers - request region and map it. */ 1349 if (!request_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len, 1350 "pm3fb regbase")) { 1351 printk(KERN_WARNING "pm3fb: Can't reserve regbase.\n"); 1352 goto err_exit_neither; 1353 } 1354 par->v_regs = 1355 ioremap(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len); 1356 if (!par->v_regs) { 1357 printk(KERN_WARNING "pm3fb: Can't remap %s register area.\n", 1358 pm3fb_fix.id); 1359 release_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len); 1360 goto err_exit_neither; 1361 } 1362 1363 /* Linear frame buffer - request region and map it. */ 1364 pm3fb_fix.smem_start = pci_resource_start(dev, 1); 1365 pm3fb_fix.smem_len = pm3fb_size_memory(par); 1366 if (!pm3fb_fix.smem_len) { 1367 printk(KERN_WARNING "pm3fb: Can't find memory on board.\n"); 1368 goto err_exit_mmio; 1369 } 1370 if (!request_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len, 1371 "pm3fb smem")) { 1372 printk(KERN_WARNING "pm3fb: Can't reserve smem.\n"); 1373 goto err_exit_mmio; 1374 } 1375 info->screen_base = ioremap_wc(pm3fb_fix.smem_start, 1376 pm3fb_fix.smem_len); 1377 if (!info->screen_base) { 1378 printk(KERN_WARNING "pm3fb: Can't ioremap smem area.\n"); 1379 release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len); 1380 goto err_exit_mmio; 1381 } 1382 info->screen_size = pm3fb_fix.smem_len; 1383 1384 if (!nomtrr) 1385 par->wc_cookie = arch_phys_wc_add(pm3fb_fix.smem_start, 1386 pm3fb_fix.smem_len); 1387 info->fbops = &pm3fb_ops; 1388 1389 par->video = PM3_READ_REG(par, PM3VideoControl); 1390 1391 info->fix = pm3fb_fix; 1392 info->pseudo_palette = par->palette; 1393 info->flags = FBINFO_HWACCEL_XPAN | 1394 FBINFO_HWACCEL_YPAN | 1395 FBINFO_HWACCEL_COPYAREA | 1396 FBINFO_HWACCEL_IMAGEBLIT | 1397 FBINFO_HWACCEL_FILLRECT; 1398 1399 if (noaccel) { 1400 printk(KERN_DEBUG "disabling acceleration\n"); 1401 info->flags |= FBINFO_HWACCEL_DISABLED; 1402 } 1403 info->pixmap.addr = kmalloc(PM3_PIXMAP_SIZE, GFP_KERNEL); 1404 if (!info->pixmap.addr) { 1405 retval = -ENOMEM; 1406 goto err_exit_pixmap; 1407 } 1408 info->pixmap.size = PM3_PIXMAP_SIZE; 1409 info->pixmap.buf_align = 4; 1410 info->pixmap.scan_align = 4; 1411 info->pixmap.access_align = 32; 1412 info->pixmap.flags = FB_PIXMAP_SYSTEM; 1413 1414 /* 1415 * This should give a reasonable default video mode. The following is 1416 * done when we can set a video mode. 1417 */ 1418 if (!mode_option) 1419 mode_option = "640x480@60"; 1420 1421 retval = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8); 1422 1423 if (!retval || retval == 4) { 1424 retval = -EINVAL; 1425 goto err_exit_both; 1426 } 1427 1428 if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { 1429 retval = -ENOMEM; 1430 goto err_exit_both; 1431 } 1432 1433 /* 1434 * For drivers that can... 1435 */ 1436 pm3fb_check_var(&info->var, info); 1437 1438 if (register_framebuffer(info) < 0) { 1439 retval = -EINVAL; 1440 goto err_exit_all; 1441 } 1442 fb_info(info, "%s frame buffer device\n", info->fix.id); 1443 pci_set_drvdata(dev, info); 1444 return 0; 1445 1446 err_exit_all: 1447 fb_dealloc_cmap(&info->cmap); 1448 err_exit_both: 1449 kfree(info->pixmap.addr); 1450 err_exit_pixmap: 1451 iounmap(info->screen_base); 1452 release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len); 1453 err_exit_mmio: 1454 iounmap(par->v_regs); 1455 release_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len); 1456 err_exit_neither: 1457 framebuffer_release(info); 1458 return retval; 1459 } 1460 1461 /* 1462 * Cleanup 1463 */ 1464 static void pm3fb_remove(struct pci_dev *dev) 1465 { 1466 struct fb_info *info = pci_get_drvdata(dev); 1467 1468 if (info) { 1469 struct fb_fix_screeninfo *fix = &info->fix; 1470 struct pm3_par *par = info->par; 1471 1472 unregister_framebuffer(info); 1473 fb_dealloc_cmap(&info->cmap); 1474 1475 arch_phys_wc_del(par->wc_cookie); 1476 iounmap(info->screen_base); 1477 release_mem_region(fix->smem_start, fix->smem_len); 1478 iounmap(par->v_regs); 1479 release_mem_region(fix->mmio_start, fix->mmio_len); 1480 1481 kfree(info->pixmap.addr); 1482 framebuffer_release(info); 1483 } 1484 } 1485 1486 static const struct pci_device_id pm3fb_id_table[] = { 1487 { PCI_VENDOR_ID_3DLABS, 0x0a, 1488 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, 1489 { 0, } 1490 }; 1491 1492 /* For PCI drivers */ 1493 static struct pci_driver pm3fb_driver = { 1494 .name = "pm3fb", 1495 .id_table = pm3fb_id_table, 1496 .probe = pm3fb_probe, 1497 .remove = pm3fb_remove, 1498 }; 1499 1500 MODULE_DEVICE_TABLE(pci, pm3fb_id_table); 1501 1502 #ifndef MODULE 1503 /* 1504 * Setup 1505 */ 1506 1507 /* 1508 * Only necessary if your driver takes special options, 1509 * otherwise we fall back on the generic fb_setup(). 1510 */ 1511 static int __init pm3fb_setup(char *options) 1512 { 1513 char *this_opt; 1514 1515 /* Parse user specified options (`video=pm3fb:') */ 1516 if (!options || !*options) 1517 return 0; 1518 1519 while ((this_opt = strsep(&options, ",")) != NULL) { 1520 if (!*this_opt) 1521 continue; 1522 else if (!strncmp(this_opt, "noaccel", 7)) 1523 noaccel = 1; 1524 else if (!strncmp(this_opt, "hwcursor=", 9)) 1525 hwcursor = simple_strtoul(this_opt + 9, NULL, 0); 1526 else if (!strncmp(this_opt, "nomtrr", 6)) 1527 nomtrr = 1; 1528 else 1529 mode_option = this_opt; 1530 } 1531 return 0; 1532 } 1533 #endif /* MODULE */ 1534 1535 static int __init pm3fb_init(void) 1536 { 1537 /* 1538 * For kernel boot options (in 'video=pm3fb:<options>' format) 1539 */ 1540 #ifndef MODULE 1541 char *option = NULL; 1542 #endif 1543 1544 if (fb_modesetting_disabled("pm3fb")) 1545 return -ENODEV; 1546 1547 #ifndef MODULE 1548 if (fb_get_options("pm3fb", &option)) 1549 return -ENODEV; 1550 pm3fb_setup(option); 1551 #endif 1552 1553 return pci_register_driver(&pm3fb_driver); 1554 } 1555 1556 #ifdef MODULE 1557 static void __exit pm3fb_exit(void) 1558 { 1559 pci_unregister_driver(&pm3fb_driver); 1560 } 1561 1562 module_exit(pm3fb_exit); 1563 #endif 1564 module_init(pm3fb_init); 1565 1566 module_param(mode_option, charp, 0); 1567 MODULE_PARM_DESC(mode_option, "Initial video mode e.g. '648x480-8@60'"); 1568 module_param(noaccel, bool, 0); 1569 MODULE_PARM_DESC(noaccel, "Disable acceleration"); 1570 module_param(hwcursor, int, 0644); 1571 MODULE_PARM_DESC(hwcursor, "Enable hardware cursor " 1572 "(1=enable, 0=disable, default=1)"); 1573 module_param(nomtrr, bool, 0); 1574 MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)"); 1575 1576 MODULE_DESCRIPTION("Permedia3 framebuffer device driver"); 1577 MODULE_LICENSE("GPL"); 1578