1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * OMAP1 internal LCD controller
4 *
5 * Copyright (C) 2004 Nokia Corporation
6 * Author: Imre Deak <imre.deak@nokia.com>
7 */
8 #include <linux/module.h>
9 #include <linux/device.h>
10 #include <linux/interrupt.h>
11 #include <linux/spinlock.h>
12 #include <linux/err.h>
13 #include <linux/mm.h>
14 #include <linux/fb.h>
15 #include <linux/dma-mapping.h>
16 #include <linux/vmalloc.h>
17 #include <linux/clk.h>
18 #include <linux/gfp.h>
19
20 #include <linux/soc/ti/omap1-io.h>
21 #include <linux/soc/ti/omap1-soc.h>
22 #include <linux/omap-dma.h>
23
24 #include <asm/mach-types.h>
25
26 #include "omapfb.h"
27
28 #include "lcdc.h"
29 #include "lcd_dma.h"
30
31 #define MODULE_NAME "lcdc"
32
33 #define MAX_PALETTE_SIZE PAGE_SIZE
34
35 enum lcdc_load_mode {
36 OMAP_LCDC_LOAD_PALETTE,
37 OMAP_LCDC_LOAD_FRAME,
38 OMAP_LCDC_LOAD_PALETTE_AND_FRAME
39 };
40
41 static struct omap_lcd_controller {
42 enum omapfb_update_mode update_mode;
43 int ext_mode;
44
45 unsigned long frame_offset;
46 int screen_width;
47 int xres;
48 int yres;
49
50 enum omapfb_color_format color_mode;
51 int bpp;
52 void *palette_virt;
53 dma_addr_t palette_phys;
54 int palette_code;
55 int palette_size;
56
57 unsigned int irq_mask;
58 struct completion last_frame_complete;
59 struct completion palette_load_complete;
60 struct clk *lcd_ck;
61 struct omapfb_device *fbdev;
62
63 void (*dma_callback)(void *data);
64 void *dma_callback_data;
65
66 dma_addr_t vram_phys;
67 void *vram_virt;
68 unsigned long vram_size;
69 } lcdc;
70
enable_irqs(int mask)71 static inline void enable_irqs(int mask)
72 {
73 lcdc.irq_mask |= mask;
74 }
75
disable_irqs(int mask)76 static inline void disable_irqs(int mask)
77 {
78 lcdc.irq_mask &= ~mask;
79 }
80
set_load_mode(enum lcdc_load_mode mode)81 static void set_load_mode(enum lcdc_load_mode mode)
82 {
83 u32 l;
84
85 l = omap_readl(OMAP_LCDC_CONTROL);
86 l &= ~(3 << 20);
87 switch (mode) {
88 case OMAP_LCDC_LOAD_PALETTE:
89 l |= 1 << 20;
90 break;
91 case OMAP_LCDC_LOAD_FRAME:
92 l |= 2 << 20;
93 break;
94 case OMAP_LCDC_LOAD_PALETTE_AND_FRAME:
95 break;
96 default:
97 BUG();
98 }
99 omap_writel(l, OMAP_LCDC_CONTROL);
100 }
101
enable_controller(void)102 static void enable_controller(void)
103 {
104 u32 l;
105
106 l = omap_readl(OMAP_LCDC_CONTROL);
107 l |= OMAP_LCDC_CTRL_LCD_EN;
108 l &= ~OMAP_LCDC_IRQ_MASK;
109 l |= lcdc.irq_mask | OMAP_LCDC_IRQ_DONE; /* enabled IRQs */
110 omap_writel(l, OMAP_LCDC_CONTROL);
111 }
112
disable_controller_async(void)113 static void disable_controller_async(void)
114 {
115 u32 l;
116 u32 mask;
117
118 l = omap_readl(OMAP_LCDC_CONTROL);
119 mask = OMAP_LCDC_CTRL_LCD_EN | OMAP_LCDC_IRQ_MASK;
120 /*
121 * Preserve the DONE mask, since we still want to get the
122 * final DONE irq. It will be disabled in the IRQ handler.
123 */
124 mask &= ~OMAP_LCDC_IRQ_DONE;
125 l &= ~mask;
126 omap_writel(l, OMAP_LCDC_CONTROL);
127 }
128
disable_controller(void)129 static void disable_controller(void)
130 {
131 init_completion(&lcdc.last_frame_complete);
132 disable_controller_async();
133 if (!wait_for_completion_timeout(&lcdc.last_frame_complete,
134 msecs_to_jiffies(500)))
135 dev_err(lcdc.fbdev->dev, "timeout waiting for FRAME DONE\n");
136 }
137
reset_controller(u32 status)138 static void reset_controller(u32 status)
139 {
140 static unsigned long reset_count;
141 static unsigned long last_jiffies;
142
143 disable_controller_async();
144 reset_count++;
145 if (reset_count == 1 || time_after(jiffies, last_jiffies + HZ)) {
146 dev_err(lcdc.fbdev->dev,
147 "resetting (status %#010x,reset count %lu)\n",
148 status, reset_count);
149 last_jiffies = jiffies;
150 }
151 if (reset_count < 100) {
152 enable_controller();
153 } else {
154 reset_count = 0;
155 dev_err(lcdc.fbdev->dev,
156 "too many reset attempts, giving up.\n");
157 }
158 }
159
160 /*
161 * Configure the LCD DMA according to the current mode specified by parameters
162 * in lcdc.fbdev and fbdev->var.
163 */
setup_lcd_dma(void)164 static void setup_lcd_dma(void)
165 {
166 static const int dma_elem_type[] = {
167 0,
168 OMAP_DMA_DATA_TYPE_S8,
169 OMAP_DMA_DATA_TYPE_S16,
170 0,
171 OMAP_DMA_DATA_TYPE_S32,
172 };
173 struct omapfb_plane_struct *plane = lcdc.fbdev->fb_info[0]->par;
174 struct fb_var_screeninfo *var = &lcdc.fbdev->fb_info[0]->var;
175 unsigned long src;
176 int esize, xelem, yelem;
177
178 src = lcdc.vram_phys + lcdc.frame_offset;
179
180 switch (var->rotate) {
181 case 0:
182 if (plane->info.mirror || (src & 3) ||
183 lcdc.color_mode == OMAPFB_COLOR_YUV420 ||
184 (lcdc.xres & 1))
185 esize = 2;
186 else
187 esize = 4;
188 xelem = lcdc.xres * lcdc.bpp / 8 / esize;
189 yelem = lcdc.yres;
190 break;
191 case 90:
192 case 180:
193 case 270:
194 if (cpu_is_omap15xx()) {
195 BUG();
196 }
197 esize = 2;
198 xelem = lcdc.yres * lcdc.bpp / 16;
199 yelem = lcdc.xres;
200 break;
201 default:
202 BUG();
203 return;
204 }
205 #ifdef VERBOSE
206 dev_dbg(lcdc.fbdev->dev,
207 "setup_dma: src %#010lx esize %d xelem %d yelem %d\n",
208 src, esize, xelem, yelem);
209 #endif
210 omap_set_lcd_dma_b1(src, xelem, yelem, dma_elem_type[esize]);
211 if (!cpu_is_omap15xx()) {
212 int bpp = lcdc.bpp;
213
214 /*
215 * YUV support is only for external mode when we have the
216 * YUV window embedded in a 16bpp frame buffer.
217 */
218 if (lcdc.color_mode == OMAPFB_COLOR_YUV420)
219 bpp = 16;
220 /* Set virtual xres elem size */
221 omap_set_lcd_dma_b1_vxres(
222 lcdc.screen_width * bpp / 8 / esize);
223 /* Setup transformations */
224 omap_set_lcd_dma_b1_rotation(var->rotate);
225 omap_set_lcd_dma_b1_mirror(plane->info.mirror);
226 }
227 omap_setup_lcd_dma();
228 }
229
lcdc_irq_handler(int irq,void * dev_id)230 static irqreturn_t lcdc_irq_handler(int irq, void *dev_id)
231 {
232 u32 status;
233
234 status = omap_readl(OMAP_LCDC_STATUS);
235
236 if (status & (OMAP_LCDC_STAT_FUF | OMAP_LCDC_STAT_SYNC_LOST))
237 reset_controller(status);
238 else {
239 if (status & OMAP_LCDC_STAT_DONE) {
240 u32 l;
241
242 /*
243 * Disable IRQ_DONE. The status bit will be cleared
244 * only when the controller is reenabled and we don't
245 * want to get more interrupts.
246 */
247 l = omap_readl(OMAP_LCDC_CONTROL);
248 l &= ~OMAP_LCDC_IRQ_DONE;
249 omap_writel(l, OMAP_LCDC_CONTROL);
250 complete(&lcdc.last_frame_complete);
251 }
252 if (status & OMAP_LCDC_STAT_LOADED_PALETTE) {
253 disable_controller_async();
254 complete(&lcdc.palette_load_complete);
255 }
256 }
257
258 /*
259 * Clear these interrupt status bits.
260 * Sync_lost, FUF bits were cleared by disabling the LCD controller
261 * LOADED_PALETTE can be cleared this way only in palette only
262 * load mode. In other load modes it's cleared by disabling the
263 * controller.
264 */
265 status &= ~(OMAP_LCDC_STAT_VSYNC |
266 OMAP_LCDC_STAT_LOADED_PALETTE |
267 OMAP_LCDC_STAT_ABC |
268 OMAP_LCDC_STAT_LINE_INT);
269 omap_writel(status, OMAP_LCDC_STATUS);
270 return IRQ_HANDLED;
271 }
272
273 /*
274 * Change to a new video mode. We defer this to a later time to avoid any
275 * flicker and not to mess up the current LCD DMA context. For this we disable
276 * the LCD controller, which will generate a DONE irq after the last frame has
277 * been transferred. Then it'll be safe to reconfigure both the LCD controller
278 * as well as the LCD DMA.
279 */
omap_lcdc_setup_plane(int plane,int channel_out,unsigned long offset,int screen_width,int pos_x,int pos_y,int width,int height,int color_mode)280 static int omap_lcdc_setup_plane(int plane, int channel_out,
281 unsigned long offset, int screen_width,
282 int pos_x, int pos_y, int width, int height,
283 int color_mode)
284 {
285 struct fb_var_screeninfo *var = &lcdc.fbdev->fb_info[0]->var;
286 struct lcd_panel *panel = lcdc.fbdev->panel;
287 int rot_x, rot_y;
288
289 if (var->rotate == 0) {
290 rot_x = panel->x_res;
291 rot_y = panel->y_res;
292 } else {
293 rot_x = panel->y_res;
294 rot_y = panel->x_res;
295 }
296 if (plane != 0 || channel_out != 0 || pos_x != 0 || pos_y != 0 ||
297 width > rot_x || height > rot_y) {
298 #ifdef VERBOSE
299 dev_dbg(lcdc.fbdev->dev,
300 "invalid plane params plane %d pos_x %d pos_y %d "
301 "w %d h %d\n", plane, pos_x, pos_y, width, height);
302 #endif
303 return -EINVAL;
304 }
305
306 lcdc.frame_offset = offset;
307 lcdc.xres = width;
308 lcdc.yres = height;
309 lcdc.screen_width = screen_width;
310 lcdc.color_mode = color_mode;
311
312 switch (color_mode) {
313 case OMAPFB_COLOR_CLUT_8BPP:
314 lcdc.bpp = 8;
315 lcdc.palette_code = 0x3000;
316 lcdc.palette_size = 512;
317 break;
318 case OMAPFB_COLOR_RGB565:
319 lcdc.bpp = 16;
320 lcdc.palette_code = 0x4000;
321 lcdc.palette_size = 32;
322 break;
323 case OMAPFB_COLOR_RGB444:
324 lcdc.bpp = 16;
325 lcdc.palette_code = 0x4000;
326 lcdc.palette_size = 32;
327 break;
328 case OMAPFB_COLOR_YUV420:
329 if (lcdc.ext_mode) {
330 lcdc.bpp = 12;
331 break;
332 }
333 fallthrough;
334 case OMAPFB_COLOR_YUV422:
335 if (lcdc.ext_mode) {
336 lcdc.bpp = 16;
337 break;
338 }
339 fallthrough;
340 default:
341 /* FIXME: other BPPs.
342 * bpp1: code 0, size 256
343 * bpp2: code 0x1000 size 256
344 * bpp4: code 0x2000 size 256
345 * bpp12: code 0x4000 size 32
346 */
347 dev_dbg(lcdc.fbdev->dev, "invalid color mode %d\n", color_mode);
348 BUG();
349 return -1;
350 }
351
352 if (lcdc.ext_mode) {
353 setup_lcd_dma();
354 return 0;
355 }
356
357 if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
358 disable_controller();
359 omap_stop_lcd_dma();
360 setup_lcd_dma();
361 enable_controller();
362 }
363
364 return 0;
365 }
366
omap_lcdc_enable_plane(int plane,int enable)367 static int omap_lcdc_enable_plane(int plane, int enable)
368 {
369 dev_dbg(lcdc.fbdev->dev,
370 "plane %d enable %d update_mode %d ext_mode %d\n",
371 plane, enable, lcdc.update_mode, lcdc.ext_mode);
372 if (plane != OMAPFB_PLANE_GFX)
373 return -EINVAL;
374
375 return 0;
376 }
377
378 /*
379 * Configure the LCD DMA for a palette load operation and do the palette
380 * downloading synchronously. We don't use the frame+palette load mode of
381 * the controller, since the palette can always be downloaded separately.
382 */
load_palette(void)383 static void load_palette(void)
384 {
385 u16 *palette;
386
387 palette = (u16 *)lcdc.palette_virt;
388
389 *(u16 *)palette &= 0x0fff;
390 *(u16 *)palette |= lcdc.palette_code;
391
392 omap_set_lcd_dma_b1(lcdc.palette_phys,
393 lcdc.palette_size / 4 + 1, 1, OMAP_DMA_DATA_TYPE_S32);
394
395 omap_set_lcd_dma_single_transfer(1);
396 omap_setup_lcd_dma();
397
398 init_completion(&lcdc.palette_load_complete);
399 enable_irqs(OMAP_LCDC_IRQ_LOADED_PALETTE);
400 set_load_mode(OMAP_LCDC_LOAD_PALETTE);
401 enable_controller();
402 if (!wait_for_completion_timeout(&lcdc.palette_load_complete,
403 msecs_to_jiffies(500)))
404 dev_err(lcdc.fbdev->dev, "timeout waiting for FRAME DONE\n");
405 /* The controller gets disabled in the irq handler */
406 disable_irqs(OMAP_LCDC_IRQ_LOADED_PALETTE);
407 omap_stop_lcd_dma();
408
409 omap_set_lcd_dma_single_transfer(lcdc.ext_mode);
410 }
411
412 /* Used only in internal controller mode */
omap_lcdc_setcolreg(u_int regno,u16 red,u16 green,u16 blue,u16 transp,int update_hw_pal)413 static int omap_lcdc_setcolreg(u_int regno, u16 red, u16 green, u16 blue,
414 u16 transp, int update_hw_pal)
415 {
416 u16 *palette;
417
418 if (lcdc.color_mode != OMAPFB_COLOR_CLUT_8BPP || regno > 255)
419 return -EINVAL;
420
421 palette = (u16 *)lcdc.palette_virt;
422
423 palette[regno] &= ~0x0fff;
424 palette[regno] |= ((red >> 12) << 8) | ((green >> 12) << 4 ) |
425 (blue >> 12);
426
427 if (update_hw_pal) {
428 disable_controller();
429 omap_stop_lcd_dma();
430 load_palette();
431 setup_lcd_dma();
432 set_load_mode(OMAP_LCDC_LOAD_FRAME);
433 enable_controller();
434 }
435
436 return 0;
437 }
438
calc_ck_div(int is_tft,int pck,int * pck_div)439 static void calc_ck_div(int is_tft, int pck, int *pck_div)
440 {
441 unsigned long lck;
442
443 pck = max(1, pck);
444 lck = clk_get_rate(lcdc.lcd_ck);
445 *pck_div = (lck + pck - 1) / pck;
446 if (is_tft)
447 *pck_div = max(2, *pck_div);
448 else
449 *pck_div = max(3, *pck_div);
450 if (*pck_div > 255) {
451 /* FIXME: try to adjust logic clock divider as well */
452 *pck_div = 255;
453 dev_warn(lcdc.fbdev->dev, "pixclock %d kHz too low.\n",
454 pck / 1000);
455 }
456 }
457
setup_regs(void)458 static inline void setup_regs(void)
459 {
460 u32 l;
461 struct lcd_panel *panel = lcdc.fbdev->panel;
462 int is_tft = panel->config & OMAP_LCDC_PANEL_TFT;
463 unsigned long lck;
464 int pcd;
465
466 l = omap_readl(OMAP_LCDC_CONTROL);
467 l &= ~OMAP_LCDC_CTRL_LCD_TFT;
468 l |= is_tft ? OMAP_LCDC_CTRL_LCD_TFT : 0;
469 #ifdef CONFIG_MACH_OMAP_PALMTE
470 /* FIXME:if (machine_is_omap_palmte()) { */
471 /* PalmTE uses alternate TFT setting in 8BPP mode */
472 l |= (is_tft && panel->bpp == 8) ? 0x810000 : 0;
473 /* } */
474 #endif
475 omap_writel(l, OMAP_LCDC_CONTROL);
476
477 l = omap_readl(OMAP_LCDC_TIMING2);
478 l &= ~(((1 << 6) - 1) << 20);
479 l |= (panel->config & OMAP_LCDC_SIGNAL_MASK) << 20;
480 omap_writel(l, OMAP_LCDC_TIMING2);
481
482 l = panel->x_res - 1;
483 l |= (panel->hsw - 1) << 10;
484 l |= (panel->hfp - 1) << 16;
485 l |= (panel->hbp - 1) << 24;
486 omap_writel(l, OMAP_LCDC_TIMING0);
487
488 l = panel->y_res - 1;
489 l |= (panel->vsw - 1) << 10;
490 l |= panel->vfp << 16;
491 l |= panel->vbp << 24;
492 omap_writel(l, OMAP_LCDC_TIMING1);
493
494 l = omap_readl(OMAP_LCDC_TIMING2);
495 l &= ~0xff;
496
497 lck = clk_get_rate(lcdc.lcd_ck);
498
499 if (!panel->pcd)
500 calc_ck_div(is_tft, panel->pixel_clock * 1000, &pcd);
501 else {
502 dev_warn(lcdc.fbdev->dev,
503 "Pixel clock divider value is obsolete.\n"
504 "Try to set pixel_clock to %lu and pcd to 0 "
505 "in drivers/video/omap/lcd_%s.c and submit a patch.\n",
506 lck / panel->pcd / 1000, panel->name);
507
508 pcd = panel->pcd;
509 }
510 l |= pcd & 0xff;
511 l |= panel->acb << 8;
512 omap_writel(l, OMAP_LCDC_TIMING2);
513
514 /* update panel info with the exact clock */
515 panel->pixel_clock = lck / pcd / 1000;
516 }
517
518 /*
519 * Configure the LCD controller, download the color palette and start a looped
520 * DMA transfer of the frame image data. Called only in internal
521 * controller mode.
522 */
omap_lcdc_set_update_mode(enum omapfb_update_mode mode)523 static int omap_lcdc_set_update_mode(enum omapfb_update_mode mode)
524 {
525 int r = 0;
526
527 if (mode != lcdc.update_mode) {
528 switch (mode) {
529 case OMAPFB_AUTO_UPDATE:
530 setup_regs();
531 load_palette();
532
533 /* Setup and start LCD DMA */
534 setup_lcd_dma();
535
536 set_load_mode(OMAP_LCDC_LOAD_FRAME);
537 enable_irqs(OMAP_LCDC_IRQ_DONE);
538 /* This will start the actual DMA transfer */
539 enable_controller();
540 lcdc.update_mode = mode;
541 break;
542 case OMAPFB_UPDATE_DISABLED:
543 disable_controller();
544 omap_stop_lcd_dma();
545 lcdc.update_mode = mode;
546 break;
547 default:
548 r = -EINVAL;
549 }
550 }
551
552 return r;
553 }
554
omap_lcdc_get_update_mode(void)555 static enum omapfb_update_mode omap_lcdc_get_update_mode(void)
556 {
557 return lcdc.update_mode;
558 }
559
560 /* PM code called only in internal controller mode */
omap_lcdc_suspend(void)561 static void omap_lcdc_suspend(void)
562 {
563 omap_lcdc_set_update_mode(OMAPFB_UPDATE_DISABLED);
564 }
565
omap_lcdc_resume(void)566 static void omap_lcdc_resume(void)
567 {
568 omap_lcdc_set_update_mode(OMAPFB_AUTO_UPDATE);
569 }
570
omap_lcdc_get_caps(int plane,struct omapfb_caps * caps)571 static void omap_lcdc_get_caps(int plane, struct omapfb_caps *caps)
572 {
573 return;
574 }
575
omap_lcdc_set_dma_callback(void (* callback)(void * data),void * data)576 int omap_lcdc_set_dma_callback(void (*callback)(void *data), void *data)
577 {
578 BUG_ON(callback == NULL);
579
580 if (lcdc.dma_callback)
581 return -EBUSY;
582 else {
583 lcdc.dma_callback = callback;
584 lcdc.dma_callback_data = data;
585 }
586 return 0;
587 }
588 EXPORT_SYMBOL(omap_lcdc_set_dma_callback);
589
omap_lcdc_free_dma_callback(void)590 void omap_lcdc_free_dma_callback(void)
591 {
592 lcdc.dma_callback = NULL;
593 }
594 EXPORT_SYMBOL(omap_lcdc_free_dma_callback);
595
lcdc_dma_handler(u16 status,void * data)596 static void lcdc_dma_handler(u16 status, void *data)
597 {
598 if (lcdc.dma_callback)
599 lcdc.dma_callback(lcdc.dma_callback_data);
600 }
601
alloc_palette_ram(void)602 static int alloc_palette_ram(void)
603 {
604 lcdc.palette_virt = dma_alloc_wc(lcdc.fbdev->dev, MAX_PALETTE_SIZE,
605 &lcdc.palette_phys, GFP_KERNEL);
606 if (lcdc.palette_virt == NULL) {
607 dev_err(lcdc.fbdev->dev, "failed to alloc palette memory\n");
608 return -ENOMEM;
609 }
610 memset(lcdc.palette_virt, 0, MAX_PALETTE_SIZE);
611
612 return 0;
613 }
614
free_palette_ram(void)615 static void free_palette_ram(void)
616 {
617 dma_free_wc(lcdc.fbdev->dev, MAX_PALETTE_SIZE, lcdc.palette_virt,
618 lcdc.palette_phys);
619 }
620
alloc_fbmem(struct omapfb_mem_region * region)621 static int alloc_fbmem(struct omapfb_mem_region *region)
622 {
623 int bpp;
624 int frame_size;
625 struct lcd_panel *panel = lcdc.fbdev->panel;
626
627 bpp = panel->bpp;
628 if (bpp == 12)
629 bpp = 16;
630 frame_size = PAGE_ALIGN(panel->x_res * bpp / 8 * panel->y_res);
631 if (region->size > frame_size)
632 frame_size = region->size;
633 lcdc.vram_size = frame_size;
634 lcdc.vram_virt = dma_alloc_wc(lcdc.fbdev->dev, lcdc.vram_size,
635 &lcdc.vram_phys, GFP_KERNEL);
636 if (lcdc.vram_virt == NULL) {
637 dev_err(lcdc.fbdev->dev, "unable to allocate FB DMA memory\n");
638 return -ENOMEM;
639 }
640 region->size = frame_size;
641 region->paddr = lcdc.vram_phys;
642 region->vaddr = lcdc.vram_virt;
643 region->alloc = 1;
644
645 memset(lcdc.vram_virt, 0, lcdc.vram_size);
646
647 return 0;
648 }
649
free_fbmem(void)650 static void free_fbmem(void)
651 {
652 dma_free_wc(lcdc.fbdev->dev, lcdc.vram_size, lcdc.vram_virt,
653 lcdc.vram_phys);
654 }
655
setup_fbmem(struct omapfb_mem_desc * req_md)656 static int setup_fbmem(struct omapfb_mem_desc *req_md)
657 {
658 if (!req_md->region_cnt) {
659 dev_err(lcdc.fbdev->dev, "no memory regions defined\n");
660 return -EINVAL;
661 }
662
663 if (req_md->region_cnt > 1) {
664 dev_err(lcdc.fbdev->dev, "only one plane is supported\n");
665 req_md->region_cnt = 1;
666 }
667
668 return alloc_fbmem(&req_md->region[0]);
669 }
670
omap_lcdc_init(struct omapfb_device * fbdev,int ext_mode,struct omapfb_mem_desc * req_vram)671 static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
672 struct omapfb_mem_desc *req_vram)
673 {
674 int r;
675 u32 l;
676 int rate;
677 struct clk *tc_ck;
678
679 lcdc.irq_mask = 0;
680
681 lcdc.fbdev = fbdev;
682 lcdc.ext_mode = ext_mode;
683
684 l = 0;
685 omap_writel(l, OMAP_LCDC_CONTROL);
686
687 /* FIXME:
688 * According to errata some platforms have a clock rate limitiation
689 */
690 lcdc.lcd_ck = clk_get(fbdev->dev, "lcd_ck");
691 if (IS_ERR(lcdc.lcd_ck)) {
692 dev_err(fbdev->dev, "unable to access LCD clock\n");
693 r = PTR_ERR(lcdc.lcd_ck);
694 goto fail0;
695 }
696
697 tc_ck = clk_get(fbdev->dev, "tc_ck");
698 if (IS_ERR(tc_ck)) {
699 dev_err(fbdev->dev, "unable to access TC clock\n");
700 r = PTR_ERR(tc_ck);
701 goto fail1;
702 }
703
704 rate = clk_get_rate(tc_ck);
705 clk_put(tc_ck);
706
707 if (machine_is_ams_delta())
708 rate /= 4;
709 r = clk_set_rate(lcdc.lcd_ck, rate);
710 if (r) {
711 dev_err(fbdev->dev, "failed to adjust LCD rate\n");
712 goto fail1;
713 }
714 clk_prepare_enable(lcdc.lcd_ck);
715
716 r = request_irq(fbdev->int_irq, lcdc_irq_handler, 0, MODULE_NAME, fbdev);
717 if (r) {
718 dev_err(fbdev->dev, "unable to get IRQ\n");
719 goto fail2;
720 }
721
722 r = omap_request_lcd_dma(lcdc_dma_handler, NULL);
723 if (r) {
724 dev_err(fbdev->dev, "unable to get LCD DMA\n");
725 goto fail3;
726 }
727
728 omap_set_lcd_dma_single_transfer(ext_mode);
729 omap_set_lcd_dma_ext_controller(ext_mode);
730
731 if (!ext_mode)
732 if ((r = alloc_palette_ram()) < 0)
733 goto fail4;
734
735 if ((r = setup_fbmem(req_vram)) < 0)
736 goto fail5;
737
738 pr_info("omapfb: LCDC initialized\n");
739
740 return 0;
741 fail5:
742 if (!ext_mode)
743 free_palette_ram();
744 fail4:
745 omap_free_lcd_dma();
746 fail3:
747 free_irq(fbdev->int_irq, lcdc.fbdev);
748 fail2:
749 clk_disable_unprepare(lcdc.lcd_ck);
750 fail1:
751 clk_put(lcdc.lcd_ck);
752 fail0:
753 return r;
754 }
755
omap_lcdc_cleanup(void)756 static void omap_lcdc_cleanup(void)
757 {
758 if (!lcdc.ext_mode)
759 free_palette_ram();
760 free_fbmem();
761 omap_free_lcd_dma();
762 free_irq(lcdc.fbdev->int_irq, lcdc.fbdev);
763 clk_disable_unprepare(lcdc.lcd_ck);
764 clk_put(lcdc.lcd_ck);
765 }
766
767 const struct lcd_ctrl omap1_int_ctrl = {
768 .name = "internal",
769 .init = omap_lcdc_init,
770 .cleanup = omap_lcdc_cleanup,
771 .get_caps = omap_lcdc_get_caps,
772 .set_update_mode = omap_lcdc_set_update_mode,
773 .get_update_mode = omap_lcdc_get_update_mode,
774 .update_window = NULL,
775 .suspend = omap_lcdc_suspend,
776 .resume = omap_lcdc_resume,
777 .setup_plane = omap_lcdc_setup_plane,
778 .enable_plane = omap_lcdc_enable_plane,
779 .setcolreg = omap_lcdc_setcolreg,
780 };
781