1 /* 2 * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. 3 * 4 * Freescale DIU Frame Buffer device driver 5 * 6 * Authors: Hongjun Chen <hong-jun.chen@freescale.com> 7 * Paul Widmer <paul.widmer@freescale.com> 8 * Srikanth Srinivasan <srikanth.srinivasan@freescale.com> 9 * York Sun <yorksun@freescale.com> 10 * 11 * Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix 12 * 13 * This program is free software; you can redistribute it and/or modify it 14 * under the terms of the GNU General Public License as published by the 15 * Free Software Foundation; either version 2 of the License, or (at your 16 * option) any later version. 17 * 18 */ 19 20 #include <linux/module.h> 21 #include <linux/kernel.h> 22 #include <linux/errno.h> 23 #include <linux/string.h> 24 #include <linux/slab.h> 25 #include <linux/fb.h> 26 #include <linux/init.h> 27 #include <linux/dma-mapping.h> 28 #include <linux/platform_device.h> 29 #include <linux/interrupt.h> 30 #include <linux/clk.h> 31 #include <linux/uaccess.h> 32 #include <linux/vmalloc.h> 33 #include <linux/spinlock.h> 34 #include <linux/of_address.h> 35 #include <linux/of_irq.h> 36 37 #include <sysdev/fsl_soc.h> 38 #include <linux/fsl-diu-fb.h> 39 #include "edid.h" 40 41 #define NUM_AOIS 5 /* 1 for plane 0, 2 for planes 1 & 2 each */ 42 43 /* HW cursor parameters */ 44 #define MAX_CURS 32 45 46 /* INT_STATUS/INT_MASK field descriptions */ 47 #define INT_VSYNC 0x01 /* Vsync interrupt */ 48 #define INT_VSYNC_WB 0x02 /* Vsync interrupt for write back operation */ 49 #define INT_UNDRUN 0x04 /* Under run exception interrupt */ 50 #define INT_PARERR 0x08 /* Display parameters error interrupt */ 51 #define INT_LS_BF_VS 0x10 /* Lines before vsync. interrupt */ 52 53 /* 54 * List of supported video modes 55 * 56 * The first entry is the default video mode. The remain entries are in 57 * order if increasing resolution and frequency. The 320x240-60 mode is 58 * the initial AOI for the second and third planes. 59 */ 60 static struct fb_videomode fsl_diu_mode_db[] = { 61 { 62 .refresh = 60, 63 .xres = 1024, 64 .yres = 768, 65 .pixclock = 15385, 66 .left_margin = 160, 67 .right_margin = 24, 68 .upper_margin = 29, 69 .lower_margin = 3, 70 .hsync_len = 136, 71 .vsync_len = 6, 72 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 73 .vmode = FB_VMODE_NONINTERLACED 74 }, 75 { 76 .refresh = 60, 77 .xres = 320, 78 .yres = 240, 79 .pixclock = 79440, 80 .left_margin = 16, 81 .right_margin = 16, 82 .upper_margin = 16, 83 .lower_margin = 5, 84 .hsync_len = 48, 85 .vsync_len = 1, 86 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 87 .vmode = FB_VMODE_NONINTERLACED 88 }, 89 { 90 .refresh = 60, 91 .xres = 640, 92 .yres = 480, 93 .pixclock = 39722, 94 .left_margin = 48, 95 .right_margin = 16, 96 .upper_margin = 33, 97 .lower_margin = 10, 98 .hsync_len = 96, 99 .vsync_len = 2, 100 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 101 .vmode = FB_VMODE_NONINTERLACED 102 }, 103 { 104 .refresh = 72, 105 .xres = 640, 106 .yres = 480, 107 .pixclock = 32052, 108 .left_margin = 128, 109 .right_margin = 24, 110 .upper_margin = 28, 111 .lower_margin = 9, 112 .hsync_len = 40, 113 .vsync_len = 3, 114 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 115 .vmode = FB_VMODE_NONINTERLACED 116 }, 117 { 118 .refresh = 75, 119 .xres = 640, 120 .yres = 480, 121 .pixclock = 31747, 122 .left_margin = 120, 123 .right_margin = 16, 124 .upper_margin = 16, 125 .lower_margin = 1, 126 .hsync_len = 64, 127 .vsync_len = 3, 128 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 129 .vmode = FB_VMODE_NONINTERLACED 130 }, 131 { 132 .refresh = 90, 133 .xres = 640, 134 .yres = 480, 135 .pixclock = 25057, 136 .left_margin = 120, 137 .right_margin = 32, 138 .upper_margin = 14, 139 .lower_margin = 25, 140 .hsync_len = 40, 141 .vsync_len = 14, 142 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 143 .vmode = FB_VMODE_NONINTERLACED 144 }, 145 { 146 .refresh = 100, 147 .xres = 640, 148 .yres = 480, 149 .pixclock = 22272, 150 .left_margin = 48, 151 .right_margin = 32, 152 .upper_margin = 17, 153 .lower_margin = 22, 154 .hsync_len = 128, 155 .vsync_len = 12, 156 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 157 .vmode = FB_VMODE_NONINTERLACED 158 }, 159 { 160 .refresh = 60, 161 .xres = 800, 162 .yres = 480, 163 .pixclock = 33805, 164 .left_margin = 96, 165 .right_margin = 24, 166 .upper_margin = 10, 167 .lower_margin = 3, 168 .hsync_len = 72, 169 .vsync_len = 7, 170 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 171 .vmode = FB_VMODE_NONINTERLACED 172 }, 173 { 174 .refresh = 60, 175 .xres = 800, 176 .yres = 600, 177 .pixclock = 25000, 178 .left_margin = 88, 179 .right_margin = 40, 180 .upper_margin = 23, 181 .lower_margin = 1, 182 .hsync_len = 128, 183 .vsync_len = 4, 184 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 185 .vmode = FB_VMODE_NONINTERLACED 186 }, 187 { 188 .refresh = 60, 189 .xres = 854, 190 .yres = 480, 191 .pixclock = 31518, 192 .left_margin = 104, 193 .right_margin = 16, 194 .upper_margin = 13, 195 .lower_margin = 1, 196 .hsync_len = 88, 197 .vsync_len = 3, 198 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 199 .vmode = FB_VMODE_NONINTERLACED 200 }, 201 { 202 .refresh = 70, 203 .xres = 1024, 204 .yres = 768, 205 .pixclock = 16886, 206 .left_margin = 3, 207 .right_margin = 3, 208 .upper_margin = 2, 209 .lower_margin = 2, 210 .hsync_len = 40, 211 .vsync_len = 18, 212 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 213 .vmode = FB_VMODE_NONINTERLACED 214 }, 215 { 216 .refresh = 75, 217 .xres = 1024, 218 .yres = 768, 219 .pixclock = 15009, 220 .left_margin = 3, 221 .right_margin = 3, 222 .upper_margin = 2, 223 .lower_margin = 2, 224 .hsync_len = 80, 225 .vsync_len = 32, 226 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 227 .vmode = FB_VMODE_NONINTERLACED 228 }, 229 { 230 .refresh = 60, 231 .xres = 1280, 232 .yres = 480, 233 .pixclock = 18939, 234 .left_margin = 353, 235 .right_margin = 47, 236 .upper_margin = 39, 237 .lower_margin = 4, 238 .hsync_len = 8, 239 .vsync_len = 2, 240 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 241 .vmode = FB_VMODE_NONINTERLACED 242 }, 243 { 244 .refresh = 60, 245 .xres = 1280, 246 .yres = 720, 247 .pixclock = 13426, 248 .left_margin = 192, 249 .right_margin = 64, 250 .upper_margin = 22, 251 .lower_margin = 1, 252 .hsync_len = 136, 253 .vsync_len = 3, 254 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 255 .vmode = FB_VMODE_NONINTERLACED 256 }, 257 { 258 .refresh = 60, 259 .xres = 1280, 260 .yres = 1024, 261 .pixclock = 9375, 262 .left_margin = 38, 263 .right_margin = 128, 264 .upper_margin = 2, 265 .lower_margin = 7, 266 .hsync_len = 216, 267 .vsync_len = 37, 268 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 269 .vmode = FB_VMODE_NONINTERLACED 270 }, 271 { 272 .refresh = 70, 273 .xres = 1280, 274 .yres = 1024, 275 .pixclock = 9380, 276 .left_margin = 6, 277 .right_margin = 6, 278 .upper_margin = 4, 279 .lower_margin = 4, 280 .hsync_len = 60, 281 .vsync_len = 94, 282 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 283 .vmode = FB_VMODE_NONINTERLACED 284 }, 285 { 286 .refresh = 75, 287 .xres = 1280, 288 .yres = 1024, 289 .pixclock = 9380, 290 .left_margin = 6, 291 .right_margin = 6, 292 .upper_margin = 4, 293 .lower_margin = 4, 294 .hsync_len = 60, 295 .vsync_len = 15, 296 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 297 .vmode = FB_VMODE_NONINTERLACED 298 }, 299 { 300 .refresh = 60, 301 .xres = 1920, 302 .yres = 1080, 303 .pixclock = 5787, 304 .left_margin = 328, 305 .right_margin = 120, 306 .upper_margin = 34, 307 .lower_margin = 1, 308 .hsync_len = 208, 309 .vsync_len = 3, 310 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 311 .vmode = FB_VMODE_NONINTERLACED 312 }, 313 }; 314 315 static char *fb_mode; 316 static unsigned long default_bpp = 32; 317 static enum fsl_diu_monitor_port monitor_port; 318 static char *monitor_string; 319 320 #if defined(CONFIG_NOT_COHERENT_CACHE) 321 static u8 *coherence_data; 322 static size_t coherence_data_size; 323 static unsigned int d_cache_line_size; 324 #endif 325 326 static DEFINE_SPINLOCK(diu_lock); 327 328 enum mfb_index { 329 PLANE0 = 0, /* Plane 0, only one AOI that fills the screen */ 330 PLANE1_AOI0, /* Plane 1, first AOI */ 331 PLANE1_AOI1, /* Plane 1, second AOI */ 332 PLANE2_AOI0, /* Plane 2, first AOI */ 333 PLANE2_AOI1, /* Plane 2, second AOI */ 334 }; 335 336 struct mfb_info { 337 enum mfb_index index; 338 char *id; 339 int registered; 340 unsigned long pseudo_palette[16]; 341 struct diu_ad *ad; 342 unsigned char g_alpha; 343 unsigned int count; 344 int x_aoi_d; /* aoi display x offset to physical screen */ 345 int y_aoi_d; /* aoi display y offset to physical screen */ 346 struct fsl_diu_data *parent; 347 }; 348 349 /** 350 * struct fsl_diu_data - per-DIU data structure 351 * @dma_addr: DMA address of this structure 352 * @fsl_diu_info: fb_info objects, one per AOI 353 * @dev_attr: sysfs structure 354 * @irq: IRQ 355 * @monitor_port: the monitor port this DIU is connected to 356 * @diu_reg: pointer to the DIU hardware registers 357 * @reg_lock: spinlock for register access 358 * @dummy_aoi: video buffer for the 4x4 32-bit dummy AOI 359 * dummy_ad: DIU Area Descriptor for the dummy AOI 360 * @ad[]: Area Descriptors for each real AOI 361 * @gamma: gamma color table 362 * @cursor: hardware cursor data 363 * 364 * This data structure must be allocated with 32-byte alignment, so that the 365 * internal fields can be aligned properly. 366 */ 367 struct fsl_diu_data { 368 dma_addr_t dma_addr; 369 struct fb_info fsl_diu_info[NUM_AOIS]; 370 struct mfb_info mfb[NUM_AOIS]; 371 struct device_attribute dev_attr; 372 unsigned int irq; 373 enum fsl_diu_monitor_port monitor_port; 374 struct diu __iomem *diu_reg; 375 spinlock_t reg_lock; 376 u8 dummy_aoi[4 * 4 * 4]; 377 struct diu_ad dummy_ad __aligned(8); 378 struct diu_ad ad[NUM_AOIS] __aligned(8); 379 u8 gamma[256 * 3] __aligned(32); 380 /* It's easier to parse the cursor data as little-endian */ 381 __le16 cursor[MAX_CURS * MAX_CURS] __aligned(32); 382 /* Blank cursor data -- used to hide the cursor */ 383 __le16 blank_cursor[MAX_CURS * MAX_CURS] __aligned(32); 384 uint8_t edid_data[EDID_LENGTH]; 385 bool has_edid; 386 } __aligned(32); 387 388 /* Determine the DMA address of a member of the fsl_diu_data structure */ 389 #define DMA_ADDR(p, f) ((p)->dma_addr + offsetof(struct fsl_diu_data, f)) 390 391 static const struct mfb_info mfb_template[] = { 392 { 393 .index = PLANE0, 394 .id = "Panel0", 395 .registered = 0, 396 .count = 0, 397 .x_aoi_d = 0, 398 .y_aoi_d = 0, 399 }, 400 { 401 .index = PLANE1_AOI0, 402 .id = "Panel1 AOI0", 403 .registered = 0, 404 .g_alpha = 0xff, 405 .count = 0, 406 .x_aoi_d = 0, 407 .y_aoi_d = 0, 408 }, 409 { 410 .index = PLANE1_AOI1, 411 .id = "Panel1 AOI1", 412 .registered = 0, 413 .g_alpha = 0xff, 414 .count = 0, 415 .x_aoi_d = 0, 416 .y_aoi_d = 480, 417 }, 418 { 419 .index = PLANE2_AOI0, 420 .id = "Panel2 AOI0", 421 .registered = 0, 422 .g_alpha = 0xff, 423 .count = 0, 424 .x_aoi_d = 640, 425 .y_aoi_d = 0, 426 }, 427 { 428 .index = PLANE2_AOI1, 429 .id = "Panel2 AOI1", 430 .registered = 0, 431 .g_alpha = 0xff, 432 .count = 0, 433 .x_aoi_d = 640, 434 .y_aoi_d = 480, 435 }, 436 }; 437 438 #ifdef DEBUG 439 static void __attribute__ ((unused)) fsl_diu_dump(struct diu __iomem *hw) 440 { 441 mb(); 442 pr_debug("DIU: desc=%08x,%08x,%08x, gamma=%08x palette=%08x " 443 "cursor=%08x curs_pos=%08x diu_mode=%08x bgnd=%08x " 444 "disp_size=%08x hsyn_para=%08x vsyn_para=%08x syn_pol=%08x " 445 "thresholds=%08x int_mask=%08x plut=%08x\n", 446 hw->desc[0], hw->desc[1], hw->desc[2], hw->gamma, 447 hw->palette, hw->cursor, hw->curs_pos, hw->diu_mode, 448 hw->bgnd, hw->disp_size, hw->hsyn_para, hw->vsyn_para, 449 hw->syn_pol, hw->thresholds, hw->int_mask, hw->plut); 450 rmb(); 451 } 452 #endif 453 454 /** 455 * fsl_diu_name_to_port - convert a port name to a monitor port enum 456 * 457 * Takes the name of a monitor port ("dvi", "lvds", or "dlvds") and returns 458 * the enum fsl_diu_monitor_port that corresponds to that string. 459 * 460 * For compatibility with older versions, a number ("0", "1", or "2") is also 461 * supported. 462 * 463 * If the string is unknown, DVI is assumed. 464 * 465 * If the particular port is not supported by the platform, another port 466 * (platform-specific) is chosen instead. 467 */ 468 static enum fsl_diu_monitor_port fsl_diu_name_to_port(const char *s) 469 { 470 enum fsl_diu_monitor_port port = FSL_DIU_PORT_DVI; 471 unsigned long val; 472 473 if (s) { 474 if (!kstrtoul(s, 10, &val) && (val <= 2)) 475 port = (enum fsl_diu_monitor_port) val; 476 else if (strncmp(s, "lvds", 4) == 0) 477 port = FSL_DIU_PORT_LVDS; 478 else if (strncmp(s, "dlvds", 5) == 0) 479 port = FSL_DIU_PORT_DLVDS; 480 } 481 482 if (diu_ops.valid_monitor_port) 483 port = diu_ops.valid_monitor_port(port); 484 485 return port; 486 } 487 488 /* 489 * Workaround for failed writing desc register of planes. 490 * Needed with MPC5121 DIU rev 2.0 silicon. 491 */ 492 void wr_reg_wa(u32 *reg, u32 val) 493 { 494 do { 495 out_be32(reg, val); 496 } while (in_be32(reg) != val); 497 } 498 499 static void fsl_diu_enable_panel(struct fb_info *info) 500 { 501 struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par; 502 struct diu_ad *ad = mfbi->ad; 503 struct fsl_diu_data *data = mfbi->parent; 504 struct diu __iomem *hw = data->diu_reg; 505 506 switch (mfbi->index) { 507 case PLANE0: 508 wr_reg_wa(&hw->desc[0], ad->paddr); 509 break; 510 case PLANE1_AOI0: 511 cmfbi = &data->mfb[2]; 512 if (hw->desc[1] != ad->paddr) { /* AOI0 closed */ 513 if (cmfbi->count > 0) /* AOI1 open */ 514 ad->next_ad = 515 cpu_to_le32(cmfbi->ad->paddr); 516 else 517 ad->next_ad = 0; 518 wr_reg_wa(&hw->desc[1], ad->paddr); 519 } 520 break; 521 case PLANE2_AOI0: 522 cmfbi = &data->mfb[4]; 523 if (hw->desc[2] != ad->paddr) { /* AOI0 closed */ 524 if (cmfbi->count > 0) /* AOI1 open */ 525 ad->next_ad = 526 cpu_to_le32(cmfbi->ad->paddr); 527 else 528 ad->next_ad = 0; 529 wr_reg_wa(&hw->desc[2], ad->paddr); 530 } 531 break; 532 case PLANE1_AOI1: 533 pmfbi = &data->mfb[1]; 534 ad->next_ad = 0; 535 if (hw->desc[1] == data->dummy_ad.paddr) 536 wr_reg_wa(&hw->desc[1], ad->paddr); 537 else /* AOI0 open */ 538 pmfbi->ad->next_ad = cpu_to_le32(ad->paddr); 539 break; 540 case PLANE2_AOI1: 541 pmfbi = &data->mfb[3]; 542 ad->next_ad = 0; 543 if (hw->desc[2] == data->dummy_ad.paddr) 544 wr_reg_wa(&hw->desc[2], ad->paddr); 545 else /* AOI0 was open */ 546 pmfbi->ad->next_ad = cpu_to_le32(ad->paddr); 547 break; 548 } 549 } 550 551 static void fsl_diu_disable_panel(struct fb_info *info) 552 { 553 struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par; 554 struct diu_ad *ad = mfbi->ad; 555 struct fsl_diu_data *data = mfbi->parent; 556 struct diu __iomem *hw = data->diu_reg; 557 558 switch (mfbi->index) { 559 case PLANE0: 560 wr_reg_wa(&hw->desc[0], 0); 561 break; 562 case PLANE1_AOI0: 563 cmfbi = &data->mfb[2]; 564 if (cmfbi->count > 0) /* AOI1 is open */ 565 wr_reg_wa(&hw->desc[1], cmfbi->ad->paddr); 566 /* move AOI1 to the first */ 567 else /* AOI1 was closed */ 568 wr_reg_wa(&hw->desc[1], data->dummy_ad.paddr); 569 /* close AOI 0 */ 570 break; 571 case PLANE2_AOI0: 572 cmfbi = &data->mfb[4]; 573 if (cmfbi->count > 0) /* AOI1 is open */ 574 wr_reg_wa(&hw->desc[2], cmfbi->ad->paddr); 575 /* move AOI1 to the first */ 576 else /* AOI1 was closed */ 577 wr_reg_wa(&hw->desc[2], data->dummy_ad.paddr); 578 /* close AOI 0 */ 579 break; 580 case PLANE1_AOI1: 581 pmfbi = &data->mfb[1]; 582 if (hw->desc[1] != ad->paddr) { 583 /* AOI1 is not the first in the chain */ 584 if (pmfbi->count > 0) 585 /* AOI0 is open, must be the first */ 586 pmfbi->ad->next_ad = 0; 587 } else /* AOI1 is the first in the chain */ 588 wr_reg_wa(&hw->desc[1], data->dummy_ad.paddr); 589 /* close AOI 1 */ 590 break; 591 case PLANE2_AOI1: 592 pmfbi = &data->mfb[3]; 593 if (hw->desc[2] != ad->paddr) { 594 /* AOI1 is not the first in the chain */ 595 if (pmfbi->count > 0) 596 /* AOI0 is open, must be the first */ 597 pmfbi->ad->next_ad = 0; 598 } else /* AOI1 is the first in the chain */ 599 wr_reg_wa(&hw->desc[2], data->dummy_ad.paddr); 600 /* close AOI 1 */ 601 break; 602 } 603 } 604 605 static void enable_lcdc(struct fb_info *info) 606 { 607 struct mfb_info *mfbi = info->par; 608 struct fsl_diu_data *data = mfbi->parent; 609 struct diu __iomem *hw = data->diu_reg; 610 611 out_be32(&hw->diu_mode, MFB_MODE1); 612 } 613 614 static void disable_lcdc(struct fb_info *info) 615 { 616 struct mfb_info *mfbi = info->par; 617 struct fsl_diu_data *data = mfbi->parent; 618 struct diu __iomem *hw = data->diu_reg; 619 620 out_be32(&hw->diu_mode, 0); 621 } 622 623 static void adjust_aoi_size_position(struct fb_var_screeninfo *var, 624 struct fb_info *info) 625 { 626 struct mfb_info *lower_aoi_mfbi, *upper_aoi_mfbi, *mfbi = info->par; 627 struct fsl_diu_data *data = mfbi->parent; 628 int available_height, upper_aoi_bottom; 629 enum mfb_index index = mfbi->index; 630 int lower_aoi_is_open, upper_aoi_is_open; 631 __u32 base_plane_width, base_plane_height, upper_aoi_height; 632 633 base_plane_width = data->fsl_diu_info[0].var.xres; 634 base_plane_height = data->fsl_diu_info[0].var.yres; 635 636 if (mfbi->x_aoi_d < 0) 637 mfbi->x_aoi_d = 0; 638 if (mfbi->y_aoi_d < 0) 639 mfbi->y_aoi_d = 0; 640 switch (index) { 641 case PLANE0: 642 if (mfbi->x_aoi_d != 0) 643 mfbi->x_aoi_d = 0; 644 if (mfbi->y_aoi_d != 0) 645 mfbi->y_aoi_d = 0; 646 break; 647 case PLANE1_AOI0: 648 case PLANE2_AOI0: 649 lower_aoi_mfbi = data->fsl_diu_info[index+1].par; 650 lower_aoi_is_open = lower_aoi_mfbi->count > 0 ? 1 : 0; 651 if (var->xres > base_plane_width) 652 var->xres = base_plane_width; 653 if ((mfbi->x_aoi_d + var->xres) > base_plane_width) 654 mfbi->x_aoi_d = base_plane_width - var->xres; 655 656 if (lower_aoi_is_open) 657 available_height = lower_aoi_mfbi->y_aoi_d; 658 else 659 available_height = base_plane_height; 660 if (var->yres > available_height) 661 var->yres = available_height; 662 if ((mfbi->y_aoi_d + var->yres) > available_height) 663 mfbi->y_aoi_d = available_height - var->yres; 664 break; 665 case PLANE1_AOI1: 666 case PLANE2_AOI1: 667 upper_aoi_mfbi = data->fsl_diu_info[index-1].par; 668 upper_aoi_height = data->fsl_diu_info[index-1].var.yres; 669 upper_aoi_bottom = upper_aoi_mfbi->y_aoi_d + upper_aoi_height; 670 upper_aoi_is_open = upper_aoi_mfbi->count > 0 ? 1 : 0; 671 if (var->xres > base_plane_width) 672 var->xres = base_plane_width; 673 if ((mfbi->x_aoi_d + var->xres) > base_plane_width) 674 mfbi->x_aoi_d = base_plane_width - var->xres; 675 if (mfbi->y_aoi_d < 0) 676 mfbi->y_aoi_d = 0; 677 if (upper_aoi_is_open) { 678 if (mfbi->y_aoi_d < upper_aoi_bottom) 679 mfbi->y_aoi_d = upper_aoi_bottom; 680 available_height = base_plane_height 681 - upper_aoi_bottom; 682 } else 683 available_height = base_plane_height; 684 if (var->yres > available_height) 685 var->yres = available_height; 686 if ((mfbi->y_aoi_d + var->yres) > base_plane_height) 687 mfbi->y_aoi_d = base_plane_height - var->yres; 688 break; 689 } 690 } 691 /* 692 * Checks to see if the hardware supports the state requested by var passed 693 * in. This function does not alter the hardware state! If the var passed in 694 * is slightly off by what the hardware can support then we alter the var 695 * PASSED in to what we can do. If the hardware doesn't support mode change 696 * a -EINVAL will be returned by the upper layers. 697 */ 698 static int fsl_diu_check_var(struct fb_var_screeninfo *var, 699 struct fb_info *info) 700 { 701 if (var->xres_virtual < var->xres) 702 var->xres_virtual = var->xres; 703 if (var->yres_virtual < var->yres) 704 var->yres_virtual = var->yres; 705 706 if (var->xoffset + info->var.xres > info->var.xres_virtual) 707 var->xoffset = info->var.xres_virtual - info->var.xres; 708 709 if (var->yoffset + info->var.yres > info->var.yres_virtual) 710 var->yoffset = info->var.yres_virtual - info->var.yres; 711 712 if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && 713 (var->bits_per_pixel != 16)) 714 var->bits_per_pixel = default_bpp; 715 716 switch (var->bits_per_pixel) { 717 case 16: 718 var->red.length = 5; 719 var->red.offset = 11; 720 var->red.msb_right = 0; 721 722 var->green.length = 6; 723 var->green.offset = 5; 724 var->green.msb_right = 0; 725 726 var->blue.length = 5; 727 var->blue.offset = 0; 728 var->blue.msb_right = 0; 729 730 var->transp.length = 0; 731 var->transp.offset = 0; 732 var->transp.msb_right = 0; 733 break; 734 case 24: 735 var->red.length = 8; 736 var->red.offset = 0; 737 var->red.msb_right = 0; 738 739 var->green.length = 8; 740 var->green.offset = 8; 741 var->green.msb_right = 0; 742 743 var->blue.length = 8; 744 var->blue.offset = 16; 745 var->blue.msb_right = 0; 746 747 var->transp.length = 0; 748 var->transp.offset = 0; 749 var->transp.msb_right = 0; 750 break; 751 case 32: 752 var->red.length = 8; 753 var->red.offset = 16; 754 var->red.msb_right = 0; 755 756 var->green.length = 8; 757 var->green.offset = 8; 758 var->green.msb_right = 0; 759 760 var->blue.length = 8; 761 var->blue.offset = 0; 762 var->blue.msb_right = 0; 763 764 var->transp.length = 8; 765 var->transp.offset = 24; 766 var->transp.msb_right = 0; 767 768 break; 769 } 770 771 var->height = -1; 772 var->width = -1; 773 var->grayscale = 0; 774 775 /* Copy nonstd field to/from sync for fbset usage */ 776 var->sync |= var->nonstd; 777 var->nonstd |= var->sync; 778 779 adjust_aoi_size_position(var, info); 780 return 0; 781 } 782 783 static void set_fix(struct fb_info *info) 784 { 785 struct fb_fix_screeninfo *fix = &info->fix; 786 struct fb_var_screeninfo *var = &info->var; 787 struct mfb_info *mfbi = info->par; 788 789 strncpy(fix->id, mfbi->id, sizeof(fix->id)); 790 fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; 791 fix->type = FB_TYPE_PACKED_PIXELS; 792 fix->accel = FB_ACCEL_NONE; 793 fix->visual = FB_VISUAL_TRUECOLOR; 794 fix->xpanstep = 1; 795 fix->ypanstep = 1; 796 } 797 798 static void update_lcdc(struct fb_info *info) 799 { 800 struct fb_var_screeninfo *var = &info->var; 801 struct mfb_info *mfbi = info->par; 802 struct fsl_diu_data *data = mfbi->parent; 803 struct diu __iomem *hw; 804 int i, j; 805 u8 *gamma_table_base; 806 807 u32 temp; 808 809 hw = data->diu_reg; 810 811 if (diu_ops.set_monitor_port) 812 diu_ops.set_monitor_port(data->monitor_port); 813 gamma_table_base = data->gamma; 814 815 /* Prep for DIU init - gamma table, cursor table */ 816 817 for (i = 0; i <= 2; i++) 818 for (j = 0; j <= 255; j++) 819 *gamma_table_base++ = j; 820 821 if (diu_ops.set_gamma_table) 822 diu_ops.set_gamma_table(data->monitor_port, data->gamma); 823 824 disable_lcdc(info); 825 826 /* Program DIU registers */ 827 828 out_be32(&hw->gamma, DMA_ADDR(data, gamma)); 829 830 out_be32(&hw->bgnd, 0x007F7F7F); /* Set background to grey */ 831 out_be32(&hw->disp_size, (var->yres << 16) | var->xres); 832 833 /* Horizontal and vertical configuration register */ 834 temp = var->left_margin << 22 | /* BP_H */ 835 var->hsync_len << 11 | /* PW_H */ 836 var->right_margin; /* FP_H */ 837 838 out_be32(&hw->hsyn_para, temp); 839 840 temp = var->upper_margin << 22 | /* BP_V */ 841 var->vsync_len << 11 | /* PW_V */ 842 var->lower_margin; /* FP_V */ 843 844 out_be32(&hw->vsyn_para, temp); 845 846 diu_ops.set_pixel_clock(var->pixclock); 847 848 #ifndef CONFIG_PPC_MPC512x 849 /* 850 * The PLUT register is defined differently on the MPC5121 than it 851 * is on other SOCs. Unfortunately, there's no documentation that 852 * explains how it's supposed to be programmed, so for now, we leave 853 * it at the default value on the MPC5121. 854 * 855 * For other SOCs, program it for the highest priority, which will 856 * reduce the chance of underrun. Technically, we should scale the 857 * priority to match the screen resolution, but doing that properly 858 * requires delicate fine-tuning for each use-case. 859 */ 860 out_be32(&hw->plut, 0x01F5F666); 861 #endif 862 863 /* Enable the DIU */ 864 enable_lcdc(info); 865 } 866 867 static int map_video_memory(struct fb_info *info) 868 { 869 u32 smem_len = info->fix.line_length * info->var.yres_virtual; 870 void *p; 871 872 p = alloc_pages_exact(smem_len, GFP_DMA | __GFP_ZERO); 873 if (!p) { 874 dev_err(info->dev, "unable to allocate fb memory\n"); 875 return -ENOMEM; 876 } 877 mutex_lock(&info->mm_lock); 878 info->screen_base = p; 879 info->fix.smem_start = virt_to_phys(info->screen_base); 880 info->fix.smem_len = smem_len; 881 mutex_unlock(&info->mm_lock); 882 info->screen_size = info->fix.smem_len; 883 884 return 0; 885 } 886 887 static void unmap_video_memory(struct fb_info *info) 888 { 889 void *p = info->screen_base; 890 size_t l = info->fix.smem_len; 891 892 mutex_lock(&info->mm_lock); 893 info->screen_base = NULL; 894 info->fix.smem_start = 0; 895 info->fix.smem_len = 0; 896 mutex_unlock(&info->mm_lock); 897 898 if (p) 899 free_pages_exact(p, l); 900 } 901 902 /* 903 * Using the fb_var_screeninfo in fb_info we set the aoi of this 904 * particular framebuffer. It is a light version of fsl_diu_set_par. 905 */ 906 static int fsl_diu_set_aoi(struct fb_info *info) 907 { 908 struct fb_var_screeninfo *var = &info->var; 909 struct mfb_info *mfbi = info->par; 910 struct diu_ad *ad = mfbi->ad; 911 912 /* AOI should not be greater than display size */ 913 ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset); 914 ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d); 915 return 0; 916 } 917 918 /** 919 * fsl_diu_get_pixel_format: return the pixel format for a given color depth 920 * 921 * The pixel format is a 32-bit value that determine which bits in each 922 * pixel are to be used for each color. This is the default function used 923 * if the platform does not define its own version. 924 */ 925 static u32 fsl_diu_get_pixel_format(unsigned int bits_per_pixel) 926 { 927 #define PF_BYTE_F 0x10000000 928 #define PF_ALPHA_C_MASK 0x0E000000 929 #define PF_ALPHA_C_SHIFT 25 930 #define PF_BLUE_C_MASK 0x01800000 931 #define PF_BLUE_C_SHIFT 23 932 #define PF_GREEN_C_MASK 0x00600000 933 #define PF_GREEN_C_SHIFT 21 934 #define PF_RED_C_MASK 0x00180000 935 #define PF_RED_C_SHIFT 19 936 #define PF_PALETTE 0x00040000 937 #define PF_PIXEL_S_MASK 0x00030000 938 #define PF_PIXEL_S_SHIFT 16 939 #define PF_COMP_3_MASK 0x0000F000 940 #define PF_COMP_3_SHIFT 12 941 #define PF_COMP_2_MASK 0x00000F00 942 #define PF_COMP_2_SHIFT 8 943 #define PF_COMP_1_MASK 0x000000F0 944 #define PF_COMP_1_SHIFT 4 945 #define PF_COMP_0_MASK 0x0000000F 946 #define PF_COMP_0_SHIFT 0 947 948 #define MAKE_PF(alpha, red, green, blue, size, c0, c1, c2, c3) \ 949 cpu_to_le32(PF_BYTE_F | (alpha << PF_ALPHA_C_SHIFT) | \ 950 (blue << PF_BLUE_C_SHIFT) | (green << PF_GREEN_C_SHIFT) | \ 951 (red << PF_RED_C_SHIFT) | (c3 << PF_COMP_3_SHIFT) | \ 952 (c2 << PF_COMP_2_SHIFT) | (c1 << PF_COMP_1_SHIFT) | \ 953 (c0 << PF_COMP_0_SHIFT) | (size << PF_PIXEL_S_SHIFT)) 954 955 switch (bits_per_pixel) { 956 case 32: 957 /* 0x88883316 */ 958 return MAKE_PF(3, 2, 1, 0, 3, 8, 8, 8, 8); 959 case 24: 960 /* 0x88082219 */ 961 return MAKE_PF(4, 0, 1, 2, 2, 8, 8, 8, 0); 962 case 16: 963 /* 0x65053118 */ 964 return MAKE_PF(4, 2, 1, 0, 1, 5, 6, 5, 0); 965 default: 966 pr_err("fsl-diu: unsupported color depth %u\n", bits_per_pixel); 967 return 0; 968 } 969 } 970 971 /* 972 * Copies a cursor image from user space to the proper place in driver 973 * memory so that the hardware can display the cursor image. 974 * 975 * Cursor data is represented as a sequence of 'width' bits packed into bytes. 976 * That is, the first 8 bits are in the first byte, the second 8 bits in the 977 * second byte, and so on. Therefore, the each row of the cursor is (width + 978 * 7) / 8 bytes of 'data' 979 * 980 * The DIU only supports cursors up to 32x32 (MAX_CURS). We reject cursors 981 * larger than this, so we already know that 'width' <= 32. Therefore, we can 982 * simplify our code by using a 32-bit big-endian integer ("line") to read in 983 * a single line of pixels, and only look at the top 'width' bits of that 984 * integer. 985 * 986 * This could result in an unaligned 32-bit read. For example, if the cursor 987 * is 24x24, then the first three bytes of 'image' contain the pixel data for 988 * the top line of the cursor. We do a 32-bit read of 'image', but we look 989 * only at the top 24 bits. Then we increment 'image' by 3 bytes. The next 990 * read is unaligned. The only problem is that we might read past the end of 991 * 'image' by 1-3 bytes, but that should not cause any problems. 992 */ 993 static void fsl_diu_load_cursor_image(struct fb_info *info, 994 const void *image, uint16_t bg, uint16_t fg, 995 unsigned int width, unsigned int height) 996 { 997 struct mfb_info *mfbi = info->par; 998 struct fsl_diu_data *data = mfbi->parent; 999 __le16 *cursor = data->cursor; 1000 __le16 _fg = cpu_to_le16(fg); 1001 __le16 _bg = cpu_to_le16(bg); 1002 unsigned int h, w; 1003 1004 for (h = 0; h < height; h++) { 1005 uint32_t mask = 1 << 31; 1006 uint32_t line = be32_to_cpup(image); 1007 1008 for (w = 0; w < width; w++) { 1009 cursor[w] = (line & mask) ? _fg : _bg; 1010 mask >>= 1; 1011 } 1012 1013 cursor += MAX_CURS; 1014 image += DIV_ROUND_UP(width, 8); 1015 } 1016 } 1017 1018 /* 1019 * Set a hardware cursor. The image data for the cursor is passed via the 1020 * fb_cursor object. 1021 */ 1022 static int fsl_diu_cursor(struct fb_info *info, struct fb_cursor *cursor) 1023 { 1024 struct mfb_info *mfbi = info->par; 1025 struct fsl_diu_data *data = mfbi->parent; 1026 struct diu __iomem *hw = data->diu_reg; 1027 1028 if (cursor->image.width > MAX_CURS || cursor->image.height > MAX_CURS) 1029 return -EINVAL; 1030 1031 /* The cursor size has changed */ 1032 if (cursor->set & FB_CUR_SETSIZE) { 1033 /* 1034 * The DIU cursor is a fixed size, so when we get this 1035 * message, instead of resizing the cursor, we just clear 1036 * all the image data, in expectation of new data. However, 1037 * in tests this control does not appear to be normally 1038 * called. 1039 */ 1040 memset(data->cursor, 0, sizeof(data->cursor)); 1041 } 1042 1043 /* The cursor position has changed (cursor->image.dx|dy) */ 1044 if (cursor->set & FB_CUR_SETPOS) { 1045 uint32_t xx, yy; 1046 1047 yy = (cursor->image.dy - info->var.yoffset) & 0x7ff; 1048 xx = (cursor->image.dx - info->var.xoffset) & 0x7ff; 1049 1050 out_be32(&hw->curs_pos, yy << 16 | xx); 1051 } 1052 1053 /* 1054 * FB_CUR_SETIMAGE - the cursor image has changed 1055 * FB_CUR_SETCMAP - the cursor colors has changed 1056 * FB_CUR_SETSHAPE - the cursor bitmask has changed 1057 */ 1058 if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETCMAP | FB_CUR_SETIMAGE)) { 1059 unsigned int image_size = 1060 DIV_ROUND_UP(cursor->image.width, 8) * cursor->image.height; 1061 unsigned int image_words = 1062 DIV_ROUND_UP(image_size, sizeof(uint32_t)); 1063 unsigned int bg_idx = cursor->image.bg_color; 1064 unsigned int fg_idx = cursor->image.fg_color; 1065 uint8_t buffer[image_size]; 1066 uint32_t *image, *source, *mask; 1067 uint16_t fg, bg; 1068 unsigned int i; 1069 1070 if (info->state != FBINFO_STATE_RUNNING) 1071 return 0; 1072 1073 /* 1074 * Determine the size of the cursor image data. Normally, 1075 * it's 8x16. 1076 */ 1077 image_size = DIV_ROUND_UP(cursor->image.width, 8) * 1078 cursor->image.height; 1079 1080 bg = ((info->cmap.red[bg_idx] & 0xf8) << 7) | 1081 ((info->cmap.green[bg_idx] & 0xf8) << 2) | 1082 ((info->cmap.blue[bg_idx] & 0xf8) >> 3) | 1083 1 << 15; 1084 1085 fg = ((info->cmap.red[fg_idx] & 0xf8) << 7) | 1086 ((info->cmap.green[fg_idx] & 0xf8) << 2) | 1087 ((info->cmap.blue[fg_idx] & 0xf8) >> 3) | 1088 1 << 15; 1089 1090 /* Use 32-bit operations on the data to improve performance */ 1091 image = (uint32_t *)buffer; 1092 source = (uint32_t *)cursor->image.data; 1093 mask = (uint32_t *)cursor->mask; 1094 1095 if (cursor->rop == ROP_XOR) 1096 for (i = 0; i < image_words; i++) 1097 image[i] = source[i] ^ mask[i]; 1098 else 1099 for (i = 0; i < image_words; i++) 1100 image[i] = source[i] & mask[i]; 1101 1102 fsl_diu_load_cursor_image(info, image, bg, fg, 1103 cursor->image.width, cursor->image.height); 1104 } 1105 1106 /* 1107 * Show or hide the cursor. The cursor data is always stored in the 1108 * 'cursor' memory block, and the actual cursor position is always in 1109 * the DIU's CURS_POS register. To hide the cursor, we redirect the 1110 * CURSOR register to a blank cursor. The show the cursor, we 1111 * redirect the CURSOR register to the real cursor data. 1112 */ 1113 if (cursor->enable) 1114 out_be32(&hw->cursor, DMA_ADDR(data, cursor)); 1115 else 1116 out_be32(&hw->cursor, DMA_ADDR(data, blank_cursor)); 1117 1118 return 0; 1119 } 1120 1121 /* 1122 * Using the fb_var_screeninfo in fb_info we set the resolution of this 1123 * particular framebuffer. This function alters the fb_fix_screeninfo stored 1124 * in fb_info. It does not alter var in fb_info since we are using that 1125 * data. This means we depend on the data in var inside fb_info to be 1126 * supported by the hardware. fsl_diu_check_var is always called before 1127 * fsl_diu_set_par to ensure this. 1128 */ 1129 static int fsl_diu_set_par(struct fb_info *info) 1130 { 1131 unsigned long len; 1132 struct fb_var_screeninfo *var = &info->var; 1133 struct mfb_info *mfbi = info->par; 1134 struct fsl_diu_data *data = mfbi->parent; 1135 struct diu_ad *ad = mfbi->ad; 1136 struct diu __iomem *hw; 1137 1138 hw = data->diu_reg; 1139 1140 set_fix(info); 1141 1142 len = info->var.yres_virtual * info->fix.line_length; 1143 /* Alloc & dealloc each time resolution/bpp change */ 1144 if (len != info->fix.smem_len) { 1145 if (info->fix.smem_start) 1146 unmap_video_memory(info); 1147 1148 /* Memory allocation for framebuffer */ 1149 if (map_video_memory(info)) { 1150 dev_err(info->dev, "unable to allocate fb memory 1\n"); 1151 return -ENOMEM; 1152 } 1153 } 1154 1155 if (diu_ops.get_pixel_format) 1156 ad->pix_fmt = diu_ops.get_pixel_format(data->monitor_port, 1157 var->bits_per_pixel); 1158 else 1159 ad->pix_fmt = fsl_diu_get_pixel_format(var->bits_per_pixel); 1160 1161 ad->addr = cpu_to_le32(info->fix.smem_start); 1162 ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) | 1163 var->xres_virtual) | mfbi->g_alpha; 1164 /* AOI should not be greater than display size */ 1165 ad->aoi_size = cpu_to_le32((var->yres << 16) | var->xres); 1166 ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset); 1167 ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d); 1168 1169 /* Disable chroma keying function */ 1170 ad->ckmax_r = 0; 1171 ad->ckmax_g = 0; 1172 ad->ckmax_b = 0; 1173 1174 ad->ckmin_r = 255; 1175 ad->ckmin_g = 255; 1176 ad->ckmin_b = 255; 1177 1178 if (mfbi->index == PLANE0) 1179 update_lcdc(info); 1180 return 0; 1181 } 1182 1183 static inline __u32 CNVT_TOHW(__u32 val, __u32 width) 1184 { 1185 return ((val << width) + 0x7FFF - val) >> 16; 1186 } 1187 1188 /* 1189 * Set a single color register. The values supplied have a 16 bit magnitude 1190 * which needs to be scaled in this function for the hardware. Things to take 1191 * into consideration are how many color registers, if any, are supported with 1192 * the current color visual. With truecolor mode no color palettes are 1193 * supported. Here a pseudo palette is created which we store the value in 1194 * pseudo_palette in struct fb_info. For pseudocolor mode we have a limited 1195 * color palette. 1196 */ 1197 static int fsl_diu_setcolreg(unsigned int regno, unsigned int red, 1198 unsigned int green, unsigned int blue, 1199 unsigned int transp, struct fb_info *info) 1200 { 1201 int ret = 1; 1202 1203 /* 1204 * If greyscale is true, then we convert the RGB value 1205 * to greyscale no matter what visual we are using. 1206 */ 1207 if (info->var.grayscale) 1208 red = green = blue = (19595 * red + 38470 * green + 1209 7471 * blue) >> 16; 1210 switch (info->fix.visual) { 1211 case FB_VISUAL_TRUECOLOR: 1212 /* 1213 * 16-bit True Colour. We encode the RGB value 1214 * according to the RGB bitfield information. 1215 */ 1216 if (regno < 16) { 1217 u32 *pal = info->pseudo_palette; 1218 u32 v; 1219 1220 red = CNVT_TOHW(red, info->var.red.length); 1221 green = CNVT_TOHW(green, info->var.green.length); 1222 blue = CNVT_TOHW(blue, info->var.blue.length); 1223 transp = CNVT_TOHW(transp, info->var.transp.length); 1224 1225 v = (red << info->var.red.offset) | 1226 (green << info->var.green.offset) | 1227 (blue << info->var.blue.offset) | 1228 (transp << info->var.transp.offset); 1229 1230 pal[regno] = v; 1231 ret = 0; 1232 } 1233 break; 1234 } 1235 1236 return ret; 1237 } 1238 1239 /* 1240 * Pan (or wrap, depending on the `vmode' field) the display using the 1241 * 'xoffset' and 'yoffset' fields of the 'var' structure. If the values 1242 * don't fit, return -EINVAL. 1243 */ 1244 static int fsl_diu_pan_display(struct fb_var_screeninfo *var, 1245 struct fb_info *info) 1246 { 1247 if ((info->var.xoffset == var->xoffset) && 1248 (info->var.yoffset == var->yoffset)) 1249 return 0; /* No change, do nothing */ 1250 1251 if (var->xoffset + info->var.xres > info->var.xres_virtual 1252 || var->yoffset + info->var.yres > info->var.yres_virtual) 1253 return -EINVAL; 1254 1255 info->var.xoffset = var->xoffset; 1256 info->var.yoffset = var->yoffset; 1257 1258 if (var->vmode & FB_VMODE_YWRAP) 1259 info->var.vmode |= FB_VMODE_YWRAP; 1260 else 1261 info->var.vmode &= ~FB_VMODE_YWRAP; 1262 1263 fsl_diu_set_aoi(info); 1264 1265 return 0; 1266 } 1267 1268 static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd, 1269 unsigned long arg) 1270 { 1271 struct mfb_info *mfbi = info->par; 1272 struct diu_ad *ad = mfbi->ad; 1273 struct mfb_chroma_key ck; 1274 unsigned char global_alpha; 1275 struct aoi_display_offset aoi_d; 1276 __u32 pix_fmt; 1277 void __user *buf = (void __user *)arg; 1278 1279 if (!arg) 1280 return -EINVAL; 1281 1282 dev_dbg(info->dev, "ioctl %08x (dir=%s%s type=%u nr=%u size=%u)\n", cmd, 1283 _IOC_DIR(cmd) & _IOC_READ ? "R" : "", 1284 _IOC_DIR(cmd) & _IOC_WRITE ? "W" : "", 1285 _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd)); 1286 1287 switch (cmd) { 1288 case MFB_SET_PIXFMT_OLD: 1289 dev_warn(info->dev, 1290 "MFB_SET_PIXFMT value of 0x%08x is deprecated.\n", 1291 MFB_SET_PIXFMT_OLD); 1292 case MFB_SET_PIXFMT: 1293 if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt))) 1294 return -EFAULT; 1295 ad->pix_fmt = pix_fmt; 1296 break; 1297 case MFB_GET_PIXFMT_OLD: 1298 dev_warn(info->dev, 1299 "MFB_GET_PIXFMT value of 0x%08x is deprecated.\n", 1300 MFB_GET_PIXFMT_OLD); 1301 case MFB_GET_PIXFMT: 1302 pix_fmt = ad->pix_fmt; 1303 if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt))) 1304 return -EFAULT; 1305 break; 1306 case MFB_SET_AOID: 1307 if (copy_from_user(&aoi_d, buf, sizeof(aoi_d))) 1308 return -EFAULT; 1309 mfbi->x_aoi_d = aoi_d.x_aoi_d; 1310 mfbi->y_aoi_d = aoi_d.y_aoi_d; 1311 fsl_diu_check_var(&info->var, info); 1312 fsl_diu_set_aoi(info); 1313 break; 1314 case MFB_GET_AOID: 1315 aoi_d.x_aoi_d = mfbi->x_aoi_d; 1316 aoi_d.y_aoi_d = mfbi->y_aoi_d; 1317 if (copy_to_user(buf, &aoi_d, sizeof(aoi_d))) 1318 return -EFAULT; 1319 break; 1320 case MFB_GET_ALPHA: 1321 global_alpha = mfbi->g_alpha; 1322 if (copy_to_user(buf, &global_alpha, sizeof(global_alpha))) 1323 return -EFAULT; 1324 break; 1325 case MFB_SET_ALPHA: 1326 /* set panel information */ 1327 if (copy_from_user(&global_alpha, buf, sizeof(global_alpha))) 1328 return -EFAULT; 1329 ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) | 1330 (global_alpha & 0xff); 1331 mfbi->g_alpha = global_alpha; 1332 break; 1333 case MFB_SET_CHROMA_KEY: 1334 /* set panel winformation */ 1335 if (copy_from_user(&ck, buf, sizeof(ck))) 1336 return -EFAULT; 1337 1338 if (ck.enable && 1339 (ck.red_max < ck.red_min || 1340 ck.green_max < ck.green_min || 1341 ck.blue_max < ck.blue_min)) 1342 return -EINVAL; 1343 1344 if (!ck.enable) { 1345 ad->ckmax_r = 0; 1346 ad->ckmax_g = 0; 1347 ad->ckmax_b = 0; 1348 ad->ckmin_r = 255; 1349 ad->ckmin_g = 255; 1350 ad->ckmin_b = 255; 1351 } else { 1352 ad->ckmax_r = ck.red_max; 1353 ad->ckmax_g = ck.green_max; 1354 ad->ckmax_b = ck.blue_max; 1355 ad->ckmin_r = ck.red_min; 1356 ad->ckmin_g = ck.green_min; 1357 ad->ckmin_b = ck.blue_min; 1358 } 1359 break; 1360 #ifdef CONFIG_PPC_MPC512x 1361 case MFB_SET_GAMMA: { 1362 struct fsl_diu_data *data = mfbi->parent; 1363 1364 if (copy_from_user(data->gamma, buf, sizeof(data->gamma))) 1365 return -EFAULT; 1366 setbits32(&data->diu_reg->gamma, 0); /* Force table reload */ 1367 break; 1368 } 1369 case MFB_GET_GAMMA: { 1370 struct fsl_diu_data *data = mfbi->parent; 1371 1372 if (copy_to_user(buf, data->gamma, sizeof(data->gamma))) 1373 return -EFAULT; 1374 break; 1375 } 1376 #endif 1377 default: 1378 dev_err(info->dev, "unknown ioctl command (0x%08X)\n", cmd); 1379 return -ENOIOCTLCMD; 1380 } 1381 1382 return 0; 1383 } 1384 1385 static inline void fsl_diu_enable_interrupts(struct fsl_diu_data *data) 1386 { 1387 u32 int_mask = INT_UNDRUN; /* enable underrun detection */ 1388 1389 if (IS_ENABLED(CONFIG_NOT_COHERENT_CACHE)) 1390 int_mask |= INT_VSYNC; /* enable vertical sync */ 1391 1392 clrbits32(&data->diu_reg->int_mask, int_mask); 1393 } 1394 1395 /* turn on fb if count == 1 1396 */ 1397 static int fsl_diu_open(struct fb_info *info, int user) 1398 { 1399 struct mfb_info *mfbi = info->par; 1400 int res = 0; 1401 1402 /* free boot splash memory on first /dev/fb0 open */ 1403 if ((mfbi->index == PLANE0) && diu_ops.release_bootmem) 1404 diu_ops.release_bootmem(); 1405 1406 spin_lock(&diu_lock); 1407 mfbi->count++; 1408 if (mfbi->count == 1) { 1409 fsl_diu_check_var(&info->var, info); 1410 res = fsl_diu_set_par(info); 1411 if (res < 0) 1412 mfbi->count--; 1413 else { 1414 fsl_diu_enable_interrupts(mfbi->parent); 1415 fsl_diu_enable_panel(info); 1416 } 1417 } 1418 1419 spin_unlock(&diu_lock); 1420 return res; 1421 } 1422 1423 /* turn off fb if count == 0 1424 */ 1425 static int fsl_diu_release(struct fb_info *info, int user) 1426 { 1427 struct mfb_info *mfbi = info->par; 1428 int res = 0; 1429 1430 spin_lock(&diu_lock); 1431 mfbi->count--; 1432 if (mfbi->count == 0) { 1433 struct fsl_diu_data *data = mfbi->parent; 1434 bool disable = true; 1435 int i; 1436 1437 /* Disable interrupts only if all AOIs are closed */ 1438 for (i = 0; i < NUM_AOIS; i++) { 1439 struct mfb_info *mi = data->fsl_diu_info[i].par; 1440 1441 if (mi->count) 1442 disable = false; 1443 } 1444 if (disable) 1445 out_be32(&data->diu_reg->int_mask, 0xffffffff); 1446 fsl_diu_disable_panel(info); 1447 } 1448 1449 spin_unlock(&diu_lock); 1450 return res; 1451 } 1452 1453 static struct fb_ops fsl_diu_ops = { 1454 .owner = THIS_MODULE, 1455 .fb_check_var = fsl_diu_check_var, 1456 .fb_set_par = fsl_diu_set_par, 1457 .fb_setcolreg = fsl_diu_setcolreg, 1458 .fb_pan_display = fsl_diu_pan_display, 1459 .fb_fillrect = cfb_fillrect, 1460 .fb_copyarea = cfb_copyarea, 1461 .fb_imageblit = cfb_imageblit, 1462 .fb_ioctl = fsl_diu_ioctl, 1463 .fb_open = fsl_diu_open, 1464 .fb_release = fsl_diu_release, 1465 .fb_cursor = fsl_diu_cursor, 1466 }; 1467 1468 static int install_fb(struct fb_info *info) 1469 { 1470 int rc; 1471 struct mfb_info *mfbi = info->par; 1472 struct fsl_diu_data *data = mfbi->parent; 1473 const char *aoi_mode, *init_aoi_mode = "320x240"; 1474 struct fb_videomode *db = fsl_diu_mode_db; 1475 unsigned int dbsize = ARRAY_SIZE(fsl_diu_mode_db); 1476 int has_default_mode = 1; 1477 1478 info->var.activate = FB_ACTIVATE_NOW; 1479 info->fbops = &fsl_diu_ops; 1480 info->flags = FBINFO_DEFAULT | FBINFO_VIRTFB | FBINFO_PARTIAL_PAN_OK | 1481 FBINFO_READS_FAST; 1482 info->pseudo_palette = mfbi->pseudo_palette; 1483 1484 rc = fb_alloc_cmap(&info->cmap, 16, 0); 1485 if (rc) 1486 return rc; 1487 1488 if (mfbi->index == PLANE0) { 1489 if (data->has_edid) { 1490 /* Now build modedb from EDID */ 1491 fb_edid_to_monspecs(data->edid_data, &info->monspecs); 1492 fb_videomode_to_modelist(info->monspecs.modedb, 1493 info->monspecs.modedb_len, 1494 &info->modelist); 1495 db = info->monspecs.modedb; 1496 dbsize = info->monspecs.modedb_len; 1497 } 1498 aoi_mode = fb_mode; 1499 } else { 1500 aoi_mode = init_aoi_mode; 1501 } 1502 rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize, NULL, 1503 default_bpp); 1504 if (!rc) { 1505 /* 1506 * For plane 0 we continue and look into 1507 * driver's internal modedb. 1508 */ 1509 if ((mfbi->index == PLANE0) && data->has_edid) 1510 has_default_mode = 0; 1511 else 1512 return -EINVAL; 1513 } 1514 1515 if (!has_default_mode) { 1516 rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db, 1517 ARRAY_SIZE(fsl_diu_mode_db), NULL, default_bpp); 1518 if (rc) 1519 has_default_mode = 1; 1520 } 1521 1522 /* Still not found, use preferred mode from database if any */ 1523 if (!has_default_mode && info->monspecs.modedb) { 1524 struct fb_monspecs *specs = &info->monspecs; 1525 struct fb_videomode *modedb = &specs->modedb[0]; 1526 1527 /* 1528 * Get preferred timing. If not found, 1529 * first mode in database will be used. 1530 */ 1531 if (specs->misc & FB_MISC_1ST_DETAIL) { 1532 int i; 1533 1534 for (i = 0; i < specs->modedb_len; i++) { 1535 if (specs->modedb[i].flag & FB_MODE_IS_FIRST) { 1536 modedb = &specs->modedb[i]; 1537 break; 1538 } 1539 } 1540 } 1541 1542 info->var.bits_per_pixel = default_bpp; 1543 fb_videomode_to_var(&info->var, modedb); 1544 } 1545 1546 if (fsl_diu_check_var(&info->var, info)) { 1547 dev_err(info->dev, "fsl_diu_check_var failed\n"); 1548 unmap_video_memory(info); 1549 fb_dealloc_cmap(&info->cmap); 1550 return -EINVAL; 1551 } 1552 1553 if (register_framebuffer(info) < 0) { 1554 dev_err(info->dev, "register_framebuffer failed\n"); 1555 unmap_video_memory(info); 1556 fb_dealloc_cmap(&info->cmap); 1557 return -EINVAL; 1558 } 1559 1560 mfbi->registered = 1; 1561 dev_info(info->dev, "%s registered successfully\n", mfbi->id); 1562 1563 return 0; 1564 } 1565 1566 static void uninstall_fb(struct fb_info *info) 1567 { 1568 struct mfb_info *mfbi = info->par; 1569 1570 if (!mfbi->registered) 1571 return; 1572 1573 unregister_framebuffer(info); 1574 unmap_video_memory(info); 1575 if (&info->cmap) 1576 fb_dealloc_cmap(&info->cmap); 1577 1578 mfbi->registered = 0; 1579 } 1580 1581 static irqreturn_t fsl_diu_isr(int irq, void *dev_id) 1582 { 1583 struct diu __iomem *hw = dev_id; 1584 uint32_t status = in_be32(&hw->int_status); 1585 1586 if (status) { 1587 /* This is the workaround for underrun */ 1588 if (status & INT_UNDRUN) { 1589 out_be32(&hw->diu_mode, 0); 1590 udelay(1); 1591 out_be32(&hw->diu_mode, 1); 1592 } 1593 #if defined(CONFIG_NOT_COHERENT_CACHE) 1594 else if (status & INT_VSYNC) { 1595 unsigned int i; 1596 1597 for (i = 0; i < coherence_data_size; 1598 i += d_cache_line_size) 1599 __asm__ __volatile__ ( 1600 "dcbz 0, %[input]" 1601 ::[input]"r"(&coherence_data[i])); 1602 } 1603 #endif 1604 return IRQ_HANDLED; 1605 } 1606 return IRQ_NONE; 1607 } 1608 1609 #ifdef CONFIG_PM 1610 /* 1611 * Power management hooks. Note that we won't be called from IRQ context, 1612 * unlike the blank functions above, so we may sleep. 1613 */ 1614 static int fsl_diu_suspend(struct platform_device *ofdev, pm_message_t state) 1615 { 1616 struct fsl_diu_data *data; 1617 1618 data = dev_get_drvdata(&ofdev->dev); 1619 disable_lcdc(data->fsl_diu_info); 1620 1621 return 0; 1622 } 1623 1624 static int fsl_diu_resume(struct platform_device *ofdev) 1625 { 1626 struct fsl_diu_data *data; 1627 unsigned int i; 1628 1629 data = dev_get_drvdata(&ofdev->dev); 1630 1631 fsl_diu_enable_interrupts(data); 1632 update_lcdc(data->fsl_diu_info); 1633 for (i = 0; i < NUM_AOIS; i++) { 1634 if (data->mfb[i].count) 1635 fsl_diu_enable_panel(&data->fsl_diu_info[i]); 1636 } 1637 1638 return 0; 1639 } 1640 1641 #else 1642 #define fsl_diu_suspend NULL 1643 #define fsl_diu_resume NULL 1644 #endif /* CONFIG_PM */ 1645 1646 static ssize_t store_monitor(struct device *device, 1647 struct device_attribute *attr, const char *buf, size_t count) 1648 { 1649 enum fsl_diu_monitor_port old_monitor_port; 1650 struct fsl_diu_data *data = 1651 container_of(attr, struct fsl_diu_data, dev_attr); 1652 1653 old_monitor_port = data->monitor_port; 1654 data->monitor_port = fsl_diu_name_to_port(buf); 1655 1656 if (old_monitor_port != data->monitor_port) { 1657 /* All AOIs need adjust pixel format 1658 * fsl_diu_set_par only change the pixsel format here 1659 * unlikely to fail. */ 1660 unsigned int i; 1661 1662 for (i=0; i < NUM_AOIS; i++) 1663 fsl_diu_set_par(&data->fsl_diu_info[i]); 1664 } 1665 return count; 1666 } 1667 1668 static ssize_t show_monitor(struct device *device, 1669 struct device_attribute *attr, char *buf) 1670 { 1671 struct fsl_diu_data *data = 1672 container_of(attr, struct fsl_diu_data, dev_attr); 1673 1674 switch (data->monitor_port) { 1675 case FSL_DIU_PORT_DVI: 1676 return sprintf(buf, "DVI\n"); 1677 case FSL_DIU_PORT_LVDS: 1678 return sprintf(buf, "Single-link LVDS\n"); 1679 case FSL_DIU_PORT_DLVDS: 1680 return sprintf(buf, "Dual-link LVDS\n"); 1681 } 1682 1683 return 0; 1684 } 1685 1686 static int fsl_diu_probe(struct platform_device *pdev) 1687 { 1688 struct device_node *np = pdev->dev.of_node; 1689 struct mfb_info *mfbi; 1690 struct fsl_diu_data *data; 1691 dma_addr_t dma_addr; /* DMA addr of fsl_diu_data struct */ 1692 const void *prop; 1693 unsigned int i; 1694 int ret; 1695 1696 data = dmam_alloc_coherent(&pdev->dev, sizeof(struct fsl_diu_data), 1697 &dma_addr, GFP_DMA | __GFP_ZERO); 1698 if (!data) 1699 return -ENOMEM; 1700 data->dma_addr = dma_addr; 1701 1702 /* 1703 * dma_alloc_coherent() uses a page allocator, so the address is 1704 * always page-aligned. We need the memory to be 32-byte aligned, 1705 * so that's good. However, if one day the allocator changes, we 1706 * need to catch that. It's not worth the effort to handle unaligned 1707 * alloctions now because it's highly unlikely to ever be a problem. 1708 */ 1709 if ((unsigned long)data & 31) { 1710 dev_err(&pdev->dev, "misaligned allocation"); 1711 ret = -ENOMEM; 1712 goto error; 1713 } 1714 1715 spin_lock_init(&data->reg_lock); 1716 1717 for (i = 0; i < NUM_AOIS; i++) { 1718 struct fb_info *info = &data->fsl_diu_info[i]; 1719 1720 info->device = &pdev->dev; 1721 info->par = &data->mfb[i]; 1722 1723 /* 1724 * We store the physical address of the AD in the reserved 1725 * 'paddr' field of the AD itself. 1726 */ 1727 data->ad[i].paddr = DMA_ADDR(data, ad[i]); 1728 1729 info->fix.smem_start = 0; 1730 1731 /* Initialize the AOI data structure */ 1732 mfbi = info->par; 1733 memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info)); 1734 mfbi->parent = data; 1735 mfbi->ad = &data->ad[i]; 1736 } 1737 1738 /* Get the EDID data from the device tree, if present */ 1739 prop = of_get_property(np, "edid", &ret); 1740 if (prop && ret == EDID_LENGTH) { 1741 memcpy(data->edid_data, prop, EDID_LENGTH); 1742 data->has_edid = true; 1743 } 1744 1745 data->diu_reg = of_iomap(np, 0); 1746 if (!data->diu_reg) { 1747 dev_err(&pdev->dev, "cannot map DIU registers\n"); 1748 ret = -EFAULT; 1749 goto error; 1750 } 1751 1752 /* Get the IRQ of the DIU */ 1753 data->irq = irq_of_parse_and_map(np, 0); 1754 1755 if (!data->irq) { 1756 dev_err(&pdev->dev, "could not get DIU IRQ\n"); 1757 ret = -EINVAL; 1758 goto error; 1759 } 1760 data->monitor_port = monitor_port; 1761 1762 /* Initialize the dummy Area Descriptor */ 1763 data->dummy_ad.addr = cpu_to_le32(DMA_ADDR(data, dummy_aoi)); 1764 data->dummy_ad.pix_fmt = 0x88882317; 1765 data->dummy_ad.src_size_g_alpha = cpu_to_le32((4 << 12) | 4); 1766 data->dummy_ad.aoi_size = cpu_to_le32((4 << 16) | 2); 1767 data->dummy_ad.offset_xyi = 0; 1768 data->dummy_ad.offset_xyd = 0; 1769 data->dummy_ad.next_ad = 0; 1770 data->dummy_ad.paddr = DMA_ADDR(data, dummy_ad); 1771 1772 /* 1773 * Let DIU continue to display splash screen if it was pre-initialized 1774 * by the bootloader; otherwise, clear the display. 1775 */ 1776 if (in_be32(&data->diu_reg->diu_mode) == MFB_MODE0) 1777 out_be32(&data->diu_reg->desc[0], 0); 1778 1779 out_be32(&data->diu_reg->desc[1], data->dummy_ad.paddr); 1780 out_be32(&data->diu_reg->desc[2], data->dummy_ad.paddr); 1781 1782 /* 1783 * Older versions of U-Boot leave interrupts enabled, so disable 1784 * all of them and clear the status register. 1785 */ 1786 out_be32(&data->diu_reg->int_mask, 0xffffffff); 1787 in_be32(&data->diu_reg->int_status); 1788 1789 ret = request_irq(data->irq, fsl_diu_isr, 0, "fsl-diu-fb", 1790 data->diu_reg); 1791 if (ret) { 1792 dev_err(&pdev->dev, "could not claim irq\n"); 1793 goto error; 1794 } 1795 1796 for (i = 0; i < NUM_AOIS; i++) { 1797 ret = install_fb(&data->fsl_diu_info[i]); 1798 if (ret) { 1799 dev_err(&pdev->dev, "could not register fb %d\n", i); 1800 free_irq(data->irq, data->diu_reg); 1801 goto error; 1802 } 1803 } 1804 1805 sysfs_attr_init(&data->dev_attr.attr); 1806 data->dev_attr.attr.name = "monitor"; 1807 data->dev_attr.attr.mode = S_IRUGO|S_IWUSR; 1808 data->dev_attr.show = show_monitor; 1809 data->dev_attr.store = store_monitor; 1810 ret = device_create_file(&pdev->dev, &data->dev_attr); 1811 if (ret) { 1812 dev_err(&pdev->dev, "could not create sysfs file %s\n", 1813 data->dev_attr.attr.name); 1814 } 1815 1816 dev_set_drvdata(&pdev->dev, data); 1817 return 0; 1818 1819 error: 1820 for (i = 0; i < NUM_AOIS; i++) 1821 uninstall_fb(&data->fsl_diu_info[i]); 1822 1823 iounmap(data->diu_reg); 1824 1825 return ret; 1826 } 1827 1828 static int fsl_diu_remove(struct platform_device *pdev) 1829 { 1830 struct fsl_diu_data *data; 1831 int i; 1832 1833 data = dev_get_drvdata(&pdev->dev); 1834 disable_lcdc(&data->fsl_diu_info[0]); 1835 1836 free_irq(data->irq, data->diu_reg); 1837 1838 for (i = 0; i < NUM_AOIS; i++) 1839 uninstall_fb(&data->fsl_diu_info[i]); 1840 1841 iounmap(data->diu_reg); 1842 1843 return 0; 1844 } 1845 1846 #ifndef MODULE 1847 static int __init fsl_diu_setup(char *options) 1848 { 1849 char *opt; 1850 unsigned long val; 1851 1852 if (!options || !*options) 1853 return 0; 1854 1855 while ((opt = strsep(&options, ",")) != NULL) { 1856 if (!*opt) 1857 continue; 1858 if (!strncmp(opt, "monitor=", 8)) { 1859 monitor_port = fsl_diu_name_to_port(opt + 8); 1860 } else if (!strncmp(opt, "bpp=", 4)) { 1861 if (!kstrtoul(opt + 4, 10, &val)) 1862 default_bpp = val; 1863 } else 1864 fb_mode = opt; 1865 } 1866 1867 return 0; 1868 } 1869 #endif 1870 1871 static const struct of_device_id fsl_diu_match[] = { 1872 #ifdef CONFIG_PPC_MPC512x 1873 { 1874 .compatible = "fsl,mpc5121-diu", 1875 }, 1876 #endif 1877 { 1878 .compatible = "fsl,diu", 1879 }, 1880 {} 1881 }; 1882 MODULE_DEVICE_TABLE(of, fsl_diu_match); 1883 1884 static struct platform_driver fsl_diu_driver = { 1885 .driver = { 1886 .name = "fsl-diu-fb", 1887 .of_match_table = fsl_diu_match, 1888 }, 1889 .probe = fsl_diu_probe, 1890 .remove = fsl_diu_remove, 1891 .suspend = fsl_diu_suspend, 1892 .resume = fsl_diu_resume, 1893 }; 1894 1895 static int __init fsl_diu_init(void) 1896 { 1897 #ifdef CONFIG_NOT_COHERENT_CACHE 1898 struct device_node *np; 1899 const u32 *prop; 1900 #endif 1901 int ret; 1902 #ifndef MODULE 1903 char *option; 1904 1905 /* 1906 * For kernel boot options (in 'video=xxxfb:<options>' format) 1907 */ 1908 if (fb_get_options("fslfb", &option)) 1909 return -ENODEV; 1910 fsl_diu_setup(option); 1911 #else 1912 monitor_port = fsl_diu_name_to_port(monitor_string); 1913 #endif 1914 1915 /* 1916 * Must to verify set_pixel_clock. If not implement on platform, 1917 * then that means that there is no platform support for the DIU. 1918 */ 1919 if (!diu_ops.set_pixel_clock) 1920 return -ENODEV; 1921 1922 pr_info("Freescale Display Interface Unit (DIU) framebuffer driver\n"); 1923 1924 #ifdef CONFIG_NOT_COHERENT_CACHE 1925 np = of_find_node_by_type(NULL, "cpu"); 1926 if (!np) { 1927 pr_err("fsl-diu-fb: can't find 'cpu' device node\n"); 1928 return -ENODEV; 1929 } 1930 1931 prop = of_get_property(np, "d-cache-size", NULL); 1932 if (prop == NULL) { 1933 pr_err("fsl-diu-fb: missing 'd-cache-size' property' " 1934 "in 'cpu' node\n"); 1935 of_node_put(np); 1936 return -ENODEV; 1937 } 1938 1939 /* 1940 * Freescale PLRU requires 13/8 times the cache size to do a proper 1941 * displacement flush 1942 */ 1943 coherence_data_size = be32_to_cpup(prop) * 13; 1944 coherence_data_size /= 8; 1945 1946 pr_debug("fsl-diu-fb: coherence data size is %zu bytes\n", 1947 coherence_data_size); 1948 1949 prop = of_get_property(np, "d-cache-line-size", NULL); 1950 if (prop == NULL) { 1951 pr_err("fsl-diu-fb: missing 'd-cache-line-size' property' " 1952 "in 'cpu' node\n"); 1953 of_node_put(np); 1954 return -ENODEV; 1955 } 1956 d_cache_line_size = be32_to_cpup(prop); 1957 1958 pr_debug("fsl-diu-fb: cache lines size is %u bytes\n", 1959 d_cache_line_size); 1960 1961 of_node_put(np); 1962 coherence_data = vmalloc(coherence_data_size); 1963 if (!coherence_data) 1964 return -ENOMEM; 1965 #endif 1966 1967 ret = platform_driver_register(&fsl_diu_driver); 1968 if (ret) { 1969 pr_err("fsl-diu-fb: failed to register platform driver\n"); 1970 #if defined(CONFIG_NOT_COHERENT_CACHE) 1971 vfree(coherence_data); 1972 #endif 1973 } 1974 return ret; 1975 } 1976 1977 static void __exit fsl_diu_exit(void) 1978 { 1979 platform_driver_unregister(&fsl_diu_driver); 1980 #if defined(CONFIG_NOT_COHERENT_CACHE) 1981 vfree(coherence_data); 1982 #endif 1983 } 1984 1985 module_init(fsl_diu_init); 1986 module_exit(fsl_diu_exit); 1987 1988 MODULE_AUTHOR("York Sun <yorksun@freescale.com>"); 1989 MODULE_DESCRIPTION("Freescale DIU framebuffer driver"); 1990 MODULE_LICENSE("GPL"); 1991 1992 module_param_named(mode, fb_mode, charp, 0); 1993 MODULE_PARM_DESC(mode, 1994 "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" "); 1995 module_param_named(bpp, default_bpp, ulong, 0); 1996 MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified in 'mode'"); 1997 module_param_named(monitor, monitor_string, charp, 0); 1998 MODULE_PARM_DESC(monitor, "Specify the monitor port " 1999 "(\"dvi\", \"lvds\", or \"dlvds\") if supported by the platform"); 2000 2001