1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * tdo24m - SPI-based drivers for Toppoly TDO24M series LCD panels 4 * 5 * Copyright (C) 2008 Marvell International Ltd. 6 * Eric Miao <eric.miao@marvell.com> 7 */ 8 9 #include <linux/module.h> 10 #include <linux/kernel.h> 11 #include <linux/init.h> 12 #include <linux/device.h> 13 #include <linux/spi/spi.h> 14 #include <linux/spi/tdo24m.h> 15 #include <linux/fb.h> 16 #include <linux/lcd.h> 17 #include <linux/slab.h> 18 19 #define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) 20 21 #define TDO24M_SPI_BUFF_SIZE (4) 22 #define MODE_QVGA 0 23 #define MODE_VGA 1 24 25 struct tdo24m { 26 struct spi_device *spi_dev; 27 struct lcd_device *lcd_dev; 28 29 struct spi_message msg; 30 struct spi_transfer xfer; 31 uint8_t *buf; 32 33 int (*adj_mode)(struct tdo24m *lcd, int mode); 34 int color_invert; 35 36 int power; 37 int mode; 38 }; 39 40 /* use bit 30, 31 as the indicator of command parameter number */ 41 #define CMD0(x) ((0 << 30) | (x)) 42 #define CMD1(x, x1) ((1 << 30) | ((x) << 9) | 0x100 | (x1)) 43 #define CMD2(x, x1, x2) ((2 << 30) | ((x) << 18) | 0x20000 |\ 44 ((x1) << 9) | 0x100 | (x2)) 45 #define CMD_NULL (-1) 46 47 static const uint32_t lcd_panel_reset[] = { 48 CMD0(0x1), /* reset */ 49 CMD0(0x0), /* nop */ 50 CMD0(0x0), /* nop */ 51 CMD0(0x0), /* nop */ 52 CMD_NULL, 53 }; 54 55 static const uint32_t lcd_panel_on[] = { 56 CMD0(0x29), /* Display ON */ 57 CMD2(0xB8, 0xFF, 0xF9), /* Output Control */ 58 CMD0(0x11), /* Sleep out */ 59 CMD1(0xB0, 0x16), /* Wake */ 60 CMD_NULL, 61 }; 62 63 static const uint32_t lcd_panel_off[] = { 64 CMD0(0x28), /* Display OFF */ 65 CMD2(0xB8, 0x80, 0x02), /* Output Control */ 66 CMD0(0x10), /* Sleep in */ 67 CMD1(0xB0, 0x00), /* Deep stand by in */ 68 CMD_NULL, 69 }; 70 71 static const uint32_t lcd_vga_pass_through_tdo24m[] = { 72 CMD1(0xB0, 0x16), 73 CMD1(0xBC, 0x80), 74 CMD1(0xE1, 0x00), 75 CMD1(0x36, 0x50), 76 CMD1(0x3B, 0x00), 77 CMD_NULL, 78 }; 79 80 static const uint32_t lcd_qvga_pass_through_tdo24m[] = { 81 CMD1(0xB0, 0x16), 82 CMD1(0xBC, 0x81), 83 CMD1(0xE1, 0x00), 84 CMD1(0x36, 0x50), 85 CMD1(0x3B, 0x22), 86 CMD_NULL, 87 }; 88 89 static const uint32_t lcd_vga_transfer_tdo24m[] = { 90 CMD1(0xcf, 0x02), /* Blanking period control (1) */ 91 CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */ 92 CMD1(0xd1, 0x01), /* CKV timing control on/off */ 93 CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */ 94 CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */ 95 CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */ 96 CMD1(0xd5, 0x14), /* ASW timing control (2) */ 97 CMD0(0x21), /* Invert for normally black display */ 98 CMD0(0x29), /* Display on */ 99 CMD_NULL, 100 }; 101 102 static const uint32_t lcd_qvga_transfer[] = { 103 CMD1(0xd6, 0x02), /* Blanking period control (1) */ 104 CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */ 105 CMD1(0xd8, 0x01), /* CKV timing control on/off */ 106 CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */ 107 CMD2(0xde, 0x05, 0x0a), /* OEV timing control */ 108 CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */ 109 CMD1(0xe0, 0x0a), /* ASW timing control (2) */ 110 CMD0(0x21), /* Invert for normally black display */ 111 CMD0(0x29), /* Display on */ 112 CMD_NULL, 113 }; 114 115 static const uint32_t lcd_vga_pass_through_tdo35s[] = { 116 CMD1(0xB0, 0x16), 117 CMD1(0xBC, 0x80), 118 CMD1(0xE1, 0x00), 119 CMD1(0x3B, 0x00), 120 CMD_NULL, 121 }; 122 123 static const uint32_t lcd_qvga_pass_through_tdo35s[] = { 124 CMD1(0xB0, 0x16), 125 CMD1(0xBC, 0x81), 126 CMD1(0xE1, 0x00), 127 CMD1(0x3B, 0x22), 128 CMD_NULL, 129 }; 130 131 static const uint32_t lcd_vga_transfer_tdo35s[] = { 132 CMD1(0xcf, 0x02), /* Blanking period control (1) */ 133 CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */ 134 CMD1(0xd1, 0x01), /* CKV timing control on/off */ 135 CMD2(0xd2, 0x00, 0x1e), /* CKV 1,2 timing control */ 136 CMD2(0xd3, 0x14, 0x28), /* OEV timing control */ 137 CMD2(0xd4, 0x28, 0x64), /* ASW timing control (1) */ 138 CMD1(0xd5, 0x28), /* ASW timing control (2) */ 139 CMD0(0x21), /* Invert for normally black display */ 140 CMD0(0x29), /* Display on */ 141 CMD_NULL, 142 }; 143 144 static const uint32_t lcd_panel_config[] = { 145 CMD2(0xb8, 0xff, 0xf9), /* Output control */ 146 CMD0(0x11), /* sleep out */ 147 CMD1(0xba, 0x01), /* Display mode (1) */ 148 CMD1(0xbb, 0x00), /* Display mode (2) */ 149 CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */ 150 CMD1(0xbf, 0x10), /* Drive system change control */ 151 CMD1(0xb1, 0x56), /* Booster operation setup */ 152 CMD1(0xb2, 0x33), /* Booster mode setup */ 153 CMD1(0xb3, 0x11), /* Booster frequency setup */ 154 CMD1(0xb4, 0x02), /* Op amp/system clock */ 155 CMD1(0xb5, 0x35), /* VCS voltage */ 156 CMD1(0xb6, 0x40), /* VCOM voltage */ 157 CMD1(0xb7, 0x03), /* External display signal */ 158 CMD1(0xbd, 0x00), /* ASW slew rate */ 159 CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */ 160 CMD1(0xc0, 0x11), /* Sleep out FR count (A) */ 161 CMD1(0xc1, 0x11), /* Sleep out FR count (B) */ 162 CMD1(0xc2, 0x11), /* Sleep out FR count (C) */ 163 CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */ 164 CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */ 165 CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */ 166 CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */ 167 CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */ 168 CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */ 169 CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */ 170 CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */ 171 CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */ 172 CMD_NULL, 173 }; 174 175 static int tdo24m_writes(struct tdo24m *lcd, const uint32_t *array) 176 { 177 struct spi_transfer *x = &lcd->xfer; 178 const uint32_t *p = array; 179 uint32_t data; 180 int nparams, err = 0; 181 182 for (; *p != CMD_NULL; p++) { 183 if (!lcd->color_invert && *p == CMD0(0x21)) 184 continue; 185 186 nparams = (*p >> 30) & 0x3; 187 188 data = *p << (7 - nparams); 189 switch (nparams) { 190 case 0: 191 lcd->buf[0] = (data >> 8) & 0xff; 192 lcd->buf[1] = data & 0xff; 193 break; 194 case 1: 195 lcd->buf[0] = (data >> 16) & 0xff; 196 lcd->buf[1] = (data >> 8) & 0xff; 197 lcd->buf[2] = data & 0xff; 198 break; 199 case 2: 200 lcd->buf[0] = (data >> 24) & 0xff; 201 lcd->buf[1] = (data >> 16) & 0xff; 202 lcd->buf[2] = (data >> 8) & 0xff; 203 lcd->buf[3] = data & 0xff; 204 break; 205 default: 206 continue; 207 } 208 x->len = nparams + 2; 209 err = spi_sync(lcd->spi_dev, &lcd->msg); 210 if (err) 211 break; 212 } 213 214 return err; 215 } 216 217 static int tdo24m_adj_mode(struct tdo24m *lcd, int mode) 218 { 219 switch (mode) { 220 case MODE_VGA: 221 tdo24m_writes(lcd, lcd_vga_pass_through_tdo24m); 222 tdo24m_writes(lcd, lcd_panel_config); 223 tdo24m_writes(lcd, lcd_vga_transfer_tdo24m); 224 break; 225 case MODE_QVGA: 226 tdo24m_writes(lcd, lcd_qvga_pass_through_tdo24m); 227 tdo24m_writes(lcd, lcd_panel_config); 228 tdo24m_writes(lcd, lcd_qvga_transfer); 229 break; 230 default: 231 return -EINVAL; 232 } 233 234 lcd->mode = mode; 235 return 0; 236 } 237 238 static int tdo35s_adj_mode(struct tdo24m *lcd, int mode) 239 { 240 switch (mode) { 241 case MODE_VGA: 242 tdo24m_writes(lcd, lcd_vga_pass_through_tdo35s); 243 tdo24m_writes(lcd, lcd_panel_config); 244 tdo24m_writes(lcd, lcd_vga_transfer_tdo35s); 245 break; 246 case MODE_QVGA: 247 tdo24m_writes(lcd, lcd_qvga_pass_through_tdo35s); 248 tdo24m_writes(lcd, lcd_panel_config); 249 tdo24m_writes(lcd, lcd_qvga_transfer); 250 break; 251 default: 252 return -EINVAL; 253 } 254 255 lcd->mode = mode; 256 return 0; 257 } 258 259 static int tdo24m_power_on(struct tdo24m *lcd) 260 { 261 int err; 262 263 err = tdo24m_writes(lcd, lcd_panel_on); 264 if (err) 265 goto out; 266 267 err = tdo24m_writes(lcd, lcd_panel_reset); 268 if (err) 269 goto out; 270 271 err = lcd->adj_mode(lcd, lcd->mode); 272 out: 273 return err; 274 } 275 276 static int tdo24m_power_off(struct tdo24m *lcd) 277 { 278 return tdo24m_writes(lcd, lcd_panel_off); 279 } 280 281 static int tdo24m_power(struct tdo24m *lcd, int power) 282 { 283 int ret = 0; 284 285 if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power)) 286 ret = tdo24m_power_on(lcd); 287 else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power)) 288 ret = tdo24m_power_off(lcd); 289 290 if (!ret) 291 lcd->power = power; 292 293 return ret; 294 } 295 296 297 static int tdo24m_set_power(struct lcd_device *ld, int power) 298 { 299 struct tdo24m *lcd = lcd_get_data(ld); 300 301 return tdo24m_power(lcd, power); 302 } 303 304 static int tdo24m_get_power(struct lcd_device *ld) 305 { 306 struct tdo24m *lcd = lcd_get_data(ld); 307 308 return lcd->power; 309 } 310 311 static int tdo24m_set_mode(struct lcd_device *ld, struct fb_videomode *m) 312 { 313 struct tdo24m *lcd = lcd_get_data(ld); 314 int mode = MODE_QVGA; 315 316 if (m->xres == 640 || m->xres == 480) 317 mode = MODE_VGA; 318 319 if (lcd->mode == mode) 320 return 0; 321 322 return lcd->adj_mode(lcd, mode); 323 } 324 325 static const struct lcd_ops tdo24m_ops = { 326 .get_power = tdo24m_get_power, 327 .set_power = tdo24m_set_power, 328 .set_mode = tdo24m_set_mode, 329 }; 330 331 static int tdo24m_probe(struct spi_device *spi) 332 { 333 struct tdo24m *lcd; 334 struct spi_message *m; 335 struct spi_transfer *x; 336 struct tdo24m_platform_data *pdata; 337 enum tdo24m_model model; 338 int err; 339 340 pdata = dev_get_platdata(&spi->dev); 341 if (pdata) 342 model = pdata->model; 343 else 344 model = TDO24M; 345 346 spi->bits_per_word = 8; 347 spi->mode = SPI_MODE_3; 348 err = spi_setup(spi); 349 if (err) 350 return err; 351 352 lcd = devm_kzalloc(&spi->dev, sizeof(struct tdo24m), GFP_KERNEL); 353 if (!lcd) 354 return -ENOMEM; 355 356 lcd->spi_dev = spi; 357 lcd->power = FB_BLANK_POWERDOWN; 358 lcd->mode = MODE_VGA; /* default to VGA */ 359 360 lcd->buf = devm_kzalloc(&spi->dev, TDO24M_SPI_BUFF_SIZE, GFP_KERNEL); 361 if (lcd->buf == NULL) 362 return -ENOMEM; 363 364 m = &lcd->msg; 365 x = &lcd->xfer; 366 367 spi_message_init(m); 368 369 x->cs_change = 0; 370 x->tx_buf = &lcd->buf[0]; 371 spi_message_add_tail(x, m); 372 373 switch (model) { 374 case TDO24M: 375 lcd->color_invert = 1; 376 lcd->adj_mode = tdo24m_adj_mode; 377 break; 378 case TDO35S: 379 lcd->adj_mode = tdo35s_adj_mode; 380 lcd->color_invert = 0; 381 break; 382 default: 383 dev_err(&spi->dev, "Unsupported model"); 384 return -EINVAL; 385 } 386 387 lcd->lcd_dev = devm_lcd_device_register(&spi->dev, "tdo24m", &spi->dev, 388 lcd, &tdo24m_ops); 389 if (IS_ERR(lcd->lcd_dev)) 390 return PTR_ERR(lcd->lcd_dev); 391 392 spi_set_drvdata(spi, lcd); 393 err = tdo24m_power(lcd, FB_BLANK_UNBLANK); 394 if (err) 395 return err; 396 397 return 0; 398 } 399 400 static void tdo24m_remove(struct spi_device *spi) 401 { 402 struct tdo24m *lcd = spi_get_drvdata(spi); 403 404 tdo24m_power(lcd, FB_BLANK_POWERDOWN); 405 } 406 407 #ifdef CONFIG_PM_SLEEP 408 static int tdo24m_suspend(struct device *dev) 409 { 410 struct tdo24m *lcd = dev_get_drvdata(dev); 411 412 return tdo24m_power(lcd, FB_BLANK_POWERDOWN); 413 } 414 415 static int tdo24m_resume(struct device *dev) 416 { 417 struct tdo24m *lcd = dev_get_drvdata(dev); 418 419 return tdo24m_power(lcd, FB_BLANK_UNBLANK); 420 } 421 #endif 422 423 static SIMPLE_DEV_PM_OPS(tdo24m_pm_ops, tdo24m_suspend, tdo24m_resume); 424 425 /* Power down all displays on reboot, poweroff or halt */ 426 static void tdo24m_shutdown(struct spi_device *spi) 427 { 428 struct tdo24m *lcd = spi_get_drvdata(spi); 429 430 tdo24m_power(lcd, FB_BLANK_POWERDOWN); 431 } 432 433 static struct spi_driver tdo24m_driver = { 434 .driver = { 435 .name = "tdo24m", 436 .pm = &tdo24m_pm_ops, 437 }, 438 .probe = tdo24m_probe, 439 .remove = tdo24m_remove, 440 .shutdown = tdo24m_shutdown, 441 }; 442 443 module_spi_driver(tdo24m_driver); 444 445 MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"); 446 MODULE_DESCRIPTION("Driver for Toppoly TDO24M LCD Panel"); 447 MODULE_LICENSE("GPL"); 448 MODULE_ALIAS("spi:tdo24m"); 449