1 /* 2 * Backlight control code for Sharp Zaurus SL-5500 3 * 4 * Copyright 2005 John Lenz <lenz@cs.wisc.edu> 5 * Maintainer: Pavel Machek <pavel@suse.cz> (unless John wants to :-) 6 * GPL v2 7 * 8 * This driver assumes single CPU. That's okay, because collie is 9 * slightly old hardware, and noone is going to retrofit second CPU to 10 * old PDA. 11 */ 12 13 /* LCD power functions */ 14 #include <linux/module.h> 15 #include <linux/init.h> 16 #include <linux/delay.h> 17 #include <linux/device.h> 18 #include <linux/interrupt.h> 19 #include <linux/fb.h> 20 #include <linux/backlight.h> 21 22 #include <asm/hardware/locomo.h> 23 #include <asm/irq.h> 24 #include <asm/mach/sharpsl_param.h> 25 #include <asm/mach-types.h> 26 27 #include "../../../arch/arm/mach-sa1100/generic.h" 28 29 static struct backlight_device *locomolcd_bl_device; 30 static struct locomo_dev *locomolcd_dev; 31 static unsigned long locomolcd_flags; 32 #define LOCOMOLCD_SUSPENDED 0x01 33 34 static void locomolcd_on(int comadj) 35 { 36 locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 0); 37 locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 1); 38 mdelay(2); 39 40 locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 0); 41 locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 1); 42 mdelay(2); 43 44 locomo_m62332_senddata(locomolcd_dev, comadj, 0); 45 mdelay(5); 46 47 locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 0); 48 locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 1); 49 mdelay(10); 50 51 /* TFTCRST | CPSOUT=0 | CPSEN */ 52 locomo_writel(0x01, locomolcd_dev->mapbase + LOCOMO_TC); 53 54 /* Set CPSD */ 55 locomo_writel(6, locomolcd_dev->mapbase + LOCOMO_CPSD); 56 57 /* TFTCRST | CPSOUT=0 | CPSEN */ 58 locomo_writel((0x04 | 0x01), locomolcd_dev->mapbase + LOCOMO_TC); 59 mdelay(10); 60 61 locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 0); 62 locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 1); 63 } 64 65 static void locomolcd_off(int comadj) 66 { 67 /* TFTCRST=1 | CPSOUT=1 | CPSEN = 0 */ 68 locomo_writel(0x06, locomolcd_dev->mapbase + LOCOMO_TC); 69 mdelay(1); 70 71 locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 0); 72 mdelay(110); 73 74 locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 0); 75 mdelay(700); 76 77 /* TFTCRST=0 | CPSOUT=0 | CPSEN = 0 */ 78 locomo_writel(0, locomolcd_dev->mapbase + LOCOMO_TC); 79 locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 0); 80 locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 0); 81 } 82 83 void locomolcd_power(int on) 84 { 85 int comadj = sharpsl_param.comadj; 86 unsigned long flags; 87 88 local_irq_save(flags); 89 90 if (!locomolcd_dev) { 91 local_irq_restore(flags); 92 return; 93 } 94 95 /* read comadj */ 96 if (comadj == -1 && machine_is_collie()) 97 comadj = 128; 98 if (comadj == -1 && machine_is_poodle()) 99 comadj = 118; 100 101 if (on) 102 locomolcd_on(comadj); 103 else 104 locomolcd_off(comadj); 105 106 local_irq_restore(flags); 107 } 108 EXPORT_SYMBOL(locomolcd_power); 109 110 111 static int current_intensity; 112 113 static int locomolcd_set_intensity(struct backlight_device *bd) 114 { 115 int intensity = bd->props.brightness; 116 117 if (bd->props.power != FB_BLANK_UNBLANK) 118 intensity = 0; 119 if (bd->props.fb_blank != FB_BLANK_UNBLANK) 120 intensity = 0; 121 if (locomolcd_flags & LOCOMOLCD_SUSPENDED) 122 intensity = 0; 123 124 switch (intensity) { 125 /* AC and non-AC are handled differently, but produce same results in sharp code? */ 126 case 0: locomo_frontlight_set(locomolcd_dev, 0, 0, 161); break; 127 case 1: locomo_frontlight_set(locomolcd_dev, 117, 0, 161); break; 128 case 2: locomo_frontlight_set(locomolcd_dev, 163, 0, 148); break; 129 case 3: locomo_frontlight_set(locomolcd_dev, 194, 0, 161); break; 130 case 4: locomo_frontlight_set(locomolcd_dev, 194, 1, 161); break; 131 132 default: 133 return -ENODEV; 134 } 135 current_intensity = intensity; 136 return 0; 137 } 138 139 static int locomolcd_get_intensity(struct backlight_device *bd) 140 { 141 return current_intensity; 142 } 143 144 static const struct backlight_ops locomobl_data = { 145 .get_brightness = locomolcd_get_intensity, 146 .update_status = locomolcd_set_intensity, 147 }; 148 149 #ifdef CONFIG_PM 150 static int locomolcd_suspend(struct locomo_dev *dev, pm_message_t state) 151 { 152 locomolcd_flags |= LOCOMOLCD_SUSPENDED; 153 locomolcd_set_intensity(locomolcd_bl_device); 154 return 0; 155 } 156 157 static int locomolcd_resume(struct locomo_dev *dev) 158 { 159 locomolcd_flags &= ~LOCOMOLCD_SUSPENDED; 160 locomolcd_set_intensity(locomolcd_bl_device); 161 return 0; 162 } 163 #else 164 #define locomolcd_suspend NULL 165 #define locomolcd_resume NULL 166 #endif 167 168 static int locomolcd_probe(struct locomo_dev *ldev) 169 { 170 unsigned long flags; 171 172 local_irq_save(flags); 173 locomolcd_dev = ldev; 174 175 locomo_gpio_set_dir(ldev->dev.parent, LOCOMO_GPIO_FL_VR, 0); 176 177 /* the poodle_lcd_power function is called for the first time 178 * from fs_initcall, which is before locomo is activated. 179 * We need to recall poodle_lcd_power here*/ 180 if (machine_is_poodle()) 181 locomolcd_power(1); 182 183 local_irq_restore(flags); 184 185 locomolcd_bl_device = backlight_device_register("locomo-bl", &ldev->dev, NULL, &locomobl_data); 186 187 if (IS_ERR (locomolcd_bl_device)) 188 return PTR_ERR (locomolcd_bl_device); 189 190 /* Set up frontlight so that screen is readable */ 191 locomolcd_bl_device->props.max_brightness = 4, 192 locomolcd_bl_device->props.brightness = 2; 193 locomolcd_set_intensity(locomolcd_bl_device); 194 195 return 0; 196 } 197 198 static int locomolcd_remove(struct locomo_dev *dev) 199 { 200 unsigned long flags; 201 202 locomolcd_bl_device->props.brightness = 0; 203 locomolcd_bl_device->props.power = 0; 204 locomolcd_set_intensity(locomolcd_bl_device); 205 206 backlight_device_unregister(locomolcd_bl_device); 207 local_irq_save(flags); 208 locomolcd_dev = NULL; 209 local_irq_restore(flags); 210 return 0; 211 } 212 213 static struct locomo_driver poodle_lcd_driver = { 214 .drv = { 215 .name = "locomo-backlight", 216 }, 217 .devid = LOCOMO_DEVID_BACKLIGHT, 218 .probe = locomolcd_probe, 219 .remove = locomolcd_remove, 220 .suspend = locomolcd_suspend, 221 .resume = locomolcd_resume, 222 }; 223 224 225 static int __init locomolcd_init(void) 226 { 227 int ret = locomo_driver_register(&poodle_lcd_driver); 228 if (ret) 229 return ret; 230 231 #ifdef CONFIG_SA1100_COLLIE 232 sa1100fb_lcd_power = locomolcd_power; 233 #endif 234 return 0; 235 } 236 237 static void __exit locomolcd_exit(void) 238 { 239 locomo_driver_unregister(&poodle_lcd_driver); 240 } 241 242 module_init(locomolcd_init); 243 module_exit(locomolcd_exit); 244 245 MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@suse.cz>"); 246 MODULE_DESCRIPTION("Collie LCD driver"); 247 MODULE_LICENSE("GPL"); 248