1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) 2003-2008 Takahiro Hirofuchi 4 * Copyright (C) 2015-2016 Nobuo Iwata 5 */ 6 7 #include <linux/init.h> 8 #include <linux/file.h> 9 #include <linux/kernel.h> 10 #include <linux/kthread.h> 11 #include <linux/module.h> 12 #include <linux/platform_device.h> 13 #include <linux/slab.h> 14 15 #include "usbip_common.h" 16 #include "vhci.h" 17 18 #define DRIVER_AUTHOR "Takahiro Hirofuchi" 19 #define DRIVER_DESC "USB/IP 'Virtual' Host Controller (VHCI) Driver" 20 21 /* 22 * TODO 23 * - update root hub emulation 24 * - move the emulation code to userland ? 25 * porting to other operating systems 26 * minimize kernel code 27 * - add suspend/resume code 28 * - clean up everything 29 */ 30 31 /* See usb gadget dummy hcd */ 32 33 static int vhci_hub_status(struct usb_hcd *hcd, char *buff); 34 static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, 35 u16 wIndex, char *buff, u16 wLength); 36 static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, 37 gfp_t mem_flags); 38 static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); 39 static int vhci_start(struct usb_hcd *vhci_hcd); 40 static void vhci_stop(struct usb_hcd *hcd); 41 static int vhci_get_frame_number(struct usb_hcd *hcd); 42 43 static const char driver_name[] = "vhci_hcd"; 44 static const char driver_desc[] = "USB/IP Virtual Host Controller"; 45 46 int vhci_num_controllers = VHCI_NR_HCS; 47 struct vhci *vhcis; 48 49 static const char * const bit_desc[] = { 50 "CONNECTION", /*0*/ 51 "ENABLE", /*1*/ 52 "SUSPEND", /*2*/ 53 "OVER_CURRENT", /*3*/ 54 "RESET", /*4*/ 55 "L1", /*5*/ 56 "R6", /*6*/ 57 "R7", /*7*/ 58 "POWER", /*8*/ 59 "LOWSPEED", /*9*/ 60 "HIGHSPEED", /*10*/ 61 "PORT_TEST", /*11*/ 62 "INDICATOR", /*12*/ 63 "R13", /*13*/ 64 "R14", /*14*/ 65 "R15", /*15*/ 66 "C_CONNECTION", /*16*/ 67 "C_ENABLE", /*17*/ 68 "C_SUSPEND", /*18*/ 69 "C_OVER_CURRENT", /*19*/ 70 "C_RESET", /*20*/ 71 "C_L1", /*21*/ 72 "R22", /*22*/ 73 "R23", /*23*/ 74 "R24", /*24*/ 75 "R25", /*25*/ 76 "R26", /*26*/ 77 "R27", /*27*/ 78 "R28", /*28*/ 79 "R29", /*29*/ 80 "R30", /*30*/ 81 "R31", /*31*/ 82 }; 83 84 static const char * const bit_desc_ss[] = { 85 "CONNECTION", /*0*/ 86 "ENABLE", /*1*/ 87 "SUSPEND", /*2*/ 88 "OVER_CURRENT", /*3*/ 89 "RESET", /*4*/ 90 "L1", /*5*/ 91 "R6", /*6*/ 92 "R7", /*7*/ 93 "R8", /*8*/ 94 "POWER", /*9*/ 95 "HIGHSPEED", /*10*/ 96 "PORT_TEST", /*11*/ 97 "INDICATOR", /*12*/ 98 "R13", /*13*/ 99 "R14", /*14*/ 100 "R15", /*15*/ 101 "C_CONNECTION", /*16*/ 102 "C_ENABLE", /*17*/ 103 "C_SUSPEND", /*18*/ 104 "C_OVER_CURRENT", /*19*/ 105 "C_RESET", /*20*/ 106 "C_BH_RESET", /*21*/ 107 "C_LINK_STATE", /*22*/ 108 "C_CONFIG_ERROR", /*23*/ 109 "R24", /*24*/ 110 "R25", /*25*/ 111 "R26", /*26*/ 112 "R27", /*27*/ 113 "R28", /*28*/ 114 "R29", /*29*/ 115 "R30", /*30*/ 116 "R31", /*31*/ 117 }; 118 119 static void dump_port_status_diff(u32 prev_status, u32 new_status, bool usb3) 120 { 121 int i = 0; 122 u32 bit = 1; 123 const char * const *desc = bit_desc; 124 125 if (usb3) 126 desc = bit_desc_ss; 127 128 pr_debug("status prev -> new: %08x -> %08x\n", prev_status, new_status); 129 while (bit) { 130 u32 prev = prev_status & bit; 131 u32 new = new_status & bit; 132 char change; 133 134 if (!prev && new) 135 change = '+'; 136 else if (prev && !new) 137 change = '-'; 138 else 139 change = ' '; 140 141 if (prev || new) { 142 pr_debug(" %c%s\n", change, desc[i]); 143 144 if (bit == 1) /* USB_PORT_STAT_CONNECTION */ 145 pr_debug(" %c%s\n", change, "USB_PORT_STAT_SPEED_5GBPS"); 146 } 147 bit <<= 1; 148 i++; 149 } 150 pr_debug("\n"); 151 } 152 153 void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed) 154 { 155 struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev); 156 struct vhci *vhci = vhci_hcd->vhci; 157 int rhport = vdev->rhport; 158 u32 status; 159 unsigned long flags; 160 161 usbip_dbg_vhci_rh("rh_port_connect %d\n", rhport); 162 163 spin_lock_irqsave(&vhci->lock, flags); 164 165 status = vhci_hcd->port_status[rhport]; 166 167 status |= USB_PORT_STAT_CONNECTION | (1 << USB_PORT_FEAT_C_CONNECTION); 168 169 switch (speed) { 170 case USB_SPEED_HIGH: 171 status |= USB_PORT_STAT_HIGH_SPEED; 172 break; 173 case USB_SPEED_LOW: 174 status |= USB_PORT_STAT_LOW_SPEED; 175 break; 176 default: 177 break; 178 } 179 180 vhci_hcd->port_status[rhport] = status; 181 182 spin_unlock_irqrestore(&vhci->lock, flags); 183 184 usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd)); 185 } 186 187 static void rh_port_disconnect(struct vhci_device *vdev) 188 { 189 struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev); 190 struct vhci *vhci = vhci_hcd->vhci; 191 int rhport = vdev->rhport; 192 u32 status; 193 unsigned long flags; 194 195 usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport); 196 197 spin_lock_irqsave(&vhci->lock, flags); 198 199 status = vhci_hcd->port_status[rhport]; 200 201 status &= ~USB_PORT_STAT_CONNECTION; 202 status |= (1 << USB_PORT_FEAT_C_CONNECTION); 203 204 vhci_hcd->port_status[rhport] = status; 205 206 spin_unlock_irqrestore(&vhci->lock, flags); 207 usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd)); 208 } 209 210 #define PORT_C_MASK \ 211 ((USB_PORT_STAT_C_CONNECTION \ 212 | USB_PORT_STAT_C_ENABLE \ 213 | USB_PORT_STAT_C_SUSPEND \ 214 | USB_PORT_STAT_C_OVERCURRENT \ 215 | USB_PORT_STAT_C_RESET) << 16) 216 217 /* 218 * Returns 0 if the status hasn't changed, or the number of bytes in buf. 219 * Ports are 0-indexed from the HCD point of view, 220 * and 1-indexed from the USB core pointer of view. 221 * 222 * @buf: a bitmap to show which port status has been changed. 223 * bit 0: reserved 224 * bit 1: the status of port 0 has been changed. 225 * bit 2: the status of port 1 has been changed. 226 * ... 227 */ 228 static int vhci_hub_status(struct usb_hcd *hcd, char *buf) 229 { 230 struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); 231 struct vhci *vhci = vhci_hcd->vhci; 232 int retval = DIV_ROUND_UP(VHCI_HC_PORTS + 1, 8); 233 int rhport; 234 int changed = 0; 235 unsigned long flags; 236 237 memset(buf, 0, retval); 238 239 spin_lock_irqsave(&vhci->lock, flags); 240 if (!HCD_HW_ACCESSIBLE(hcd)) { 241 usbip_dbg_vhci_rh("hw accessible flag not on?\n"); 242 goto done; 243 } 244 245 /* check pseudo status register for each port */ 246 for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { 247 if ((vhci_hcd->port_status[rhport] & PORT_C_MASK)) { 248 /* The status of a port has been changed, */ 249 usbip_dbg_vhci_rh("port %d status changed\n", rhport); 250 251 buf[(rhport + 1) / 8] |= 1 << (rhport + 1) % 8; 252 changed = 1; 253 } 254 } 255 256 if ((hcd->state == HC_STATE_SUSPENDED) && (changed == 1)) 257 usb_hcd_resume_root_hub(hcd); 258 259 done: 260 spin_unlock_irqrestore(&vhci->lock, flags); 261 return changed ? retval : 0; 262 } 263 264 /* usb 3.0 root hub device descriptor */ 265 static struct { 266 struct usb_bos_descriptor bos; 267 struct usb_ss_cap_descriptor ss_cap; 268 } __packed usb3_bos_desc = { 269 270 .bos = { 271 .bLength = USB_DT_BOS_SIZE, 272 .bDescriptorType = USB_DT_BOS, 273 .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)), 274 .bNumDeviceCaps = 1, 275 }, 276 .ss_cap = { 277 .bLength = USB_DT_USB_SS_CAP_SIZE, 278 .bDescriptorType = USB_DT_DEVICE_CAPABILITY, 279 .bDevCapabilityType = USB_SS_CAP_TYPE, 280 .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION), 281 .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION), 282 }, 283 }; 284 285 static inline void 286 ss_hub_descriptor(struct usb_hub_descriptor *desc) 287 { 288 memset(desc, 0, sizeof *desc); 289 desc->bDescriptorType = USB_DT_SS_HUB; 290 desc->bDescLength = 12; 291 desc->wHubCharacteristics = cpu_to_le16( 292 HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); 293 desc->bNbrPorts = VHCI_HC_PORTS; 294 desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/ 295 desc->u.ss.DeviceRemovable = 0xffff; 296 } 297 298 static inline void hub_descriptor(struct usb_hub_descriptor *desc) 299 { 300 int width; 301 302 memset(desc, 0, sizeof(*desc)); 303 desc->bDescriptorType = USB_DT_HUB; 304 desc->wHubCharacteristics = cpu_to_le16( 305 HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); 306 307 desc->bNbrPorts = VHCI_HC_PORTS; 308 BUILD_BUG_ON(VHCI_HC_PORTS > USB_MAXCHILDREN); 309 width = desc->bNbrPorts / 8 + 1; 310 desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * width; 311 memset(&desc->u.hs.DeviceRemovable[0], 0, width); 312 memset(&desc->u.hs.DeviceRemovable[width], 0xff, width); 313 } 314 315 static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, 316 u16 wIndex, char *buf, u16 wLength) 317 { 318 struct vhci_hcd *vhci_hcd; 319 struct vhci *vhci; 320 int retval = 0; 321 int rhport = -1; 322 unsigned long flags; 323 bool invalid_rhport = false; 324 325 u32 prev_port_status[VHCI_HC_PORTS]; 326 327 if (!HCD_HW_ACCESSIBLE(hcd)) 328 return -ETIMEDOUT; 329 330 /* 331 * NOTE: 332 * wIndex (bits 0-7) shows the port number and begins from 1? 333 */ 334 wIndex = ((__u8)(wIndex & 0x00ff)); 335 usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue, 336 wIndex); 337 338 /* 339 * wIndex can be 0 for some request types (typeReq). rhport is 340 * in valid range when wIndex >= 1 and < VHCI_HC_PORTS. 341 * 342 * Reference port_status[] only with valid rhport when 343 * invalid_rhport is false. 344 */ 345 if (wIndex < 1 || wIndex > VHCI_HC_PORTS) { 346 invalid_rhport = true; 347 if (wIndex > VHCI_HC_PORTS) 348 pr_err("invalid port number %d\n", wIndex); 349 } else 350 rhport = wIndex - 1; 351 352 vhci_hcd = hcd_to_vhci_hcd(hcd); 353 vhci = vhci_hcd->vhci; 354 355 spin_lock_irqsave(&vhci->lock, flags); 356 357 /* store old status and compare now and old later */ 358 if (usbip_dbg_flag_vhci_rh) { 359 if (!invalid_rhport) 360 memcpy(prev_port_status, vhci_hcd->port_status, 361 sizeof(prev_port_status)); 362 } 363 364 switch (typeReq) { 365 case ClearHubFeature: 366 usbip_dbg_vhci_rh(" ClearHubFeature\n"); 367 break; 368 case ClearPortFeature: 369 if (invalid_rhport) { 370 pr_err("invalid port number %d\n", wIndex); 371 goto error; 372 } 373 switch (wValue) { 374 case USB_PORT_FEAT_SUSPEND: 375 if (hcd->speed == HCD_USB3) { 376 pr_err(" ClearPortFeature: USB_PORT_FEAT_SUSPEND req not " 377 "supported for USB 3.0 roothub\n"); 378 goto error; 379 } 380 usbip_dbg_vhci_rh( 381 " ClearPortFeature: USB_PORT_FEAT_SUSPEND\n"); 382 if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_SUSPEND) { 383 /* 20msec signaling */ 384 vhci_hcd->resuming = 1; 385 vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(20); 386 } 387 break; 388 case USB_PORT_FEAT_POWER: 389 usbip_dbg_vhci_rh( 390 " ClearPortFeature: USB_PORT_FEAT_POWER\n"); 391 if (hcd->speed == HCD_USB3) 392 vhci_hcd->port_status[rhport] &= ~USB_SS_PORT_STAT_POWER; 393 else 394 vhci_hcd->port_status[rhport] &= ~USB_PORT_STAT_POWER; 395 break; 396 default: 397 usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n", 398 wValue); 399 if (wValue >= 32) 400 goto error; 401 vhci_hcd->port_status[rhport] &= ~(1 << wValue); 402 break; 403 } 404 break; 405 case GetHubDescriptor: 406 usbip_dbg_vhci_rh(" GetHubDescriptor\n"); 407 if (hcd->speed == HCD_USB3 && 408 (wLength < USB_DT_SS_HUB_SIZE || 409 wValue != (USB_DT_SS_HUB << 8))) { 410 pr_err("Wrong hub descriptor type for USB 3.0 roothub.\n"); 411 goto error; 412 } 413 if (hcd->speed == HCD_USB3) 414 ss_hub_descriptor((struct usb_hub_descriptor *) buf); 415 else 416 hub_descriptor((struct usb_hub_descriptor *) buf); 417 break; 418 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 419 if (hcd->speed != HCD_USB3) 420 goto error; 421 422 if ((wValue >> 8) != USB_DT_BOS) 423 goto error; 424 425 memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc)); 426 retval = sizeof(usb3_bos_desc); 427 break; 428 case GetHubStatus: 429 usbip_dbg_vhci_rh(" GetHubStatus\n"); 430 *(__le32 *) buf = cpu_to_le32(0); 431 break; 432 case GetPortStatus: 433 usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex); 434 if (invalid_rhport) { 435 pr_err("invalid port number %d\n", wIndex); 436 retval = -EPIPE; 437 goto error; 438 } 439 440 /* we do not care about resume. */ 441 442 /* whoever resets or resumes must GetPortStatus to 443 * complete it!! 444 */ 445 if (vhci_hcd->resuming && time_after(jiffies, vhci_hcd->re_timeout)) { 446 vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_SUSPEND); 447 vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_SUSPEND); 448 vhci_hcd->resuming = 0; 449 vhci_hcd->re_timeout = 0; 450 } 451 452 if ((vhci_hcd->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) != 453 0 && time_after(jiffies, vhci_hcd->re_timeout)) { 454 vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_RESET); 455 vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_RESET); 456 vhci_hcd->re_timeout = 0; 457 458 /* 459 * A few drivers do usb reset during probe when 460 * the device could be in VDEV_ST_USED state 461 */ 462 if (vhci_hcd->vdev[rhport].ud.status == 463 VDEV_ST_NOTASSIGNED || 464 vhci_hcd->vdev[rhport].ud.status == 465 VDEV_ST_USED) { 466 usbip_dbg_vhci_rh( 467 " enable rhport %d (status %u)\n", 468 rhport, 469 vhci_hcd->vdev[rhport].ud.status); 470 vhci_hcd->port_status[rhport] |= 471 USB_PORT_STAT_ENABLE; 472 } 473 474 if (hcd->speed < HCD_USB3) { 475 switch (vhci_hcd->vdev[rhport].speed) { 476 case USB_SPEED_HIGH: 477 vhci_hcd->port_status[rhport] |= 478 USB_PORT_STAT_HIGH_SPEED; 479 break; 480 case USB_SPEED_LOW: 481 vhci_hcd->port_status[rhport] |= 482 USB_PORT_STAT_LOW_SPEED; 483 break; 484 default: 485 pr_err("vhci_device speed not set\n"); 486 break; 487 } 488 } 489 } 490 ((__le16 *) buf)[0] = cpu_to_le16(vhci_hcd->port_status[rhport]); 491 ((__le16 *) buf)[1] = 492 cpu_to_le16(vhci_hcd->port_status[rhport] >> 16); 493 494 usbip_dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0], 495 ((u16 *)buf)[1]); 496 break; 497 case SetHubFeature: 498 usbip_dbg_vhci_rh(" SetHubFeature\n"); 499 retval = -EPIPE; 500 break; 501 case SetPortFeature: 502 switch (wValue) { 503 case USB_PORT_FEAT_LINK_STATE: 504 usbip_dbg_vhci_rh( 505 " SetPortFeature: USB_PORT_FEAT_LINK_STATE\n"); 506 if (hcd->speed != HCD_USB3) { 507 pr_err("USB_PORT_FEAT_LINK_STATE req not " 508 "supported for USB 2.0 roothub\n"); 509 goto error; 510 } 511 /* 512 * Since this is dummy we don't have an actual link so 513 * there is nothing to do for the SET_LINK_STATE cmd 514 */ 515 break; 516 case USB_PORT_FEAT_U1_TIMEOUT: 517 usbip_dbg_vhci_rh( 518 " SetPortFeature: USB_PORT_FEAT_U1_TIMEOUT\n"); 519 fallthrough; 520 case USB_PORT_FEAT_U2_TIMEOUT: 521 usbip_dbg_vhci_rh( 522 " SetPortFeature: USB_PORT_FEAT_U2_TIMEOUT\n"); 523 /* TODO: add suspend/resume support! */ 524 if (hcd->speed != HCD_USB3) { 525 pr_err("USB_PORT_FEAT_U1/2_TIMEOUT req not " 526 "supported for USB 2.0 roothub\n"); 527 goto error; 528 } 529 break; 530 case USB_PORT_FEAT_SUSPEND: 531 usbip_dbg_vhci_rh( 532 " SetPortFeature: USB_PORT_FEAT_SUSPEND\n"); 533 /* Applicable only for USB2.0 hub */ 534 if (hcd->speed == HCD_USB3) { 535 pr_err("USB_PORT_FEAT_SUSPEND req not " 536 "supported for USB 3.0 roothub\n"); 537 goto error; 538 } 539 540 if (invalid_rhport) { 541 pr_err("invalid port number %d\n", wIndex); 542 goto error; 543 } 544 545 vhci_hcd->port_status[rhport] |= USB_PORT_STAT_SUSPEND; 546 break; 547 case USB_PORT_FEAT_POWER: 548 usbip_dbg_vhci_rh( 549 " SetPortFeature: USB_PORT_FEAT_POWER\n"); 550 if (invalid_rhport) { 551 pr_err("invalid port number %d\n", wIndex); 552 goto error; 553 } 554 if (hcd->speed == HCD_USB3) 555 vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER; 556 else 557 vhci_hcd->port_status[rhport] |= USB_PORT_STAT_POWER; 558 break; 559 case USB_PORT_FEAT_BH_PORT_RESET: 560 usbip_dbg_vhci_rh( 561 " SetPortFeature: USB_PORT_FEAT_BH_PORT_RESET\n"); 562 if (invalid_rhport) { 563 pr_err("invalid port number %d\n", wIndex); 564 goto error; 565 } 566 /* Applicable only for USB3.0 hub */ 567 if (hcd->speed != HCD_USB3) { 568 pr_err("USB_PORT_FEAT_BH_PORT_RESET req not " 569 "supported for USB 2.0 roothub\n"); 570 goto error; 571 } 572 fallthrough; 573 case USB_PORT_FEAT_RESET: 574 usbip_dbg_vhci_rh( 575 " SetPortFeature: USB_PORT_FEAT_RESET\n"); 576 if (invalid_rhport) { 577 pr_err("invalid port number %d\n", wIndex); 578 goto error; 579 } 580 /* if it's already enabled, disable */ 581 if (hcd->speed == HCD_USB3) { 582 vhci_hcd->port_status[rhport] = 0; 583 vhci_hcd->port_status[rhport] = 584 (USB_SS_PORT_STAT_POWER | 585 USB_PORT_STAT_CONNECTION | 586 USB_PORT_STAT_RESET); 587 } else if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_ENABLE) { 588 vhci_hcd->port_status[rhport] &= ~(USB_PORT_STAT_ENABLE 589 | USB_PORT_STAT_LOW_SPEED 590 | USB_PORT_STAT_HIGH_SPEED); 591 } 592 593 /* 50msec reset signaling */ 594 vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(50); 595 fallthrough; 596 default: 597 usbip_dbg_vhci_rh(" SetPortFeature: default %d\n", 598 wValue); 599 if (invalid_rhport) { 600 pr_err("invalid port number %d\n", wIndex); 601 goto error; 602 } 603 if (wValue >= 32) 604 goto error; 605 if (hcd->speed == HCD_USB3) { 606 if ((vhci_hcd->port_status[rhport] & 607 USB_SS_PORT_STAT_POWER) != 0) { 608 vhci_hcd->port_status[rhport] |= (1 << wValue); 609 } 610 } else 611 if ((vhci_hcd->port_status[rhport] & 612 USB_PORT_STAT_POWER) != 0) { 613 vhci_hcd->port_status[rhport] |= (1 << wValue); 614 } 615 } 616 break; 617 case GetPortErrorCount: 618 usbip_dbg_vhci_rh(" GetPortErrorCount\n"); 619 if (hcd->speed != HCD_USB3) { 620 pr_err("GetPortErrorCount req not " 621 "supported for USB 2.0 roothub\n"); 622 goto error; 623 } 624 /* We'll always return 0 since this is a dummy hub */ 625 *(__le32 *) buf = cpu_to_le32(0); 626 break; 627 case SetHubDepth: 628 usbip_dbg_vhci_rh(" SetHubDepth\n"); 629 if (hcd->speed != HCD_USB3) { 630 pr_err("SetHubDepth req not supported for " 631 "USB 2.0 roothub\n"); 632 goto error; 633 } 634 break; 635 default: 636 pr_err("default hub control req: %04x v%04x i%04x l%d\n", 637 typeReq, wValue, wIndex, wLength); 638 error: 639 /* "protocol stall" on error */ 640 retval = -EPIPE; 641 } 642 643 if (usbip_dbg_flag_vhci_rh) { 644 pr_debug("port %d\n", rhport); 645 /* Only dump valid port status */ 646 if (!invalid_rhport) { 647 dump_port_status_diff(prev_port_status[rhport], 648 vhci_hcd->port_status[rhport], 649 hcd->speed == HCD_USB3); 650 } 651 } 652 usbip_dbg_vhci_rh(" bye\n"); 653 654 spin_unlock_irqrestore(&vhci->lock, flags); 655 656 if (!invalid_rhport && 657 (vhci_hcd->port_status[rhport] & PORT_C_MASK) != 0) { 658 usb_hcd_poll_rh_status(hcd); 659 } 660 661 return retval; 662 } 663 664 static void vhci_tx_urb(struct urb *urb, struct vhci_device *vdev) 665 { 666 struct vhci_priv *priv; 667 struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev); 668 unsigned long flags; 669 670 priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC); 671 if (!priv) { 672 usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC); 673 return; 674 } 675 676 spin_lock_irqsave(&vdev->priv_lock, flags); 677 678 priv->seqnum = atomic_inc_return(&vhci_hcd->seqnum); 679 if (priv->seqnum == 0xffff) 680 dev_info(&urb->dev->dev, "seqnum max\n"); 681 682 priv->vdev = vdev; 683 priv->urb = urb; 684 685 urb->hcpriv = (void *) priv; 686 687 list_add_tail(&priv->list, &vdev->priv_tx); 688 689 wake_up(&vdev->waitq_tx); 690 spin_unlock_irqrestore(&vdev->priv_lock, flags); 691 } 692 693 static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) 694 { 695 struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); 696 struct vhci *vhci = vhci_hcd->vhci; 697 struct device *dev = &urb->dev->dev; 698 u8 portnum = urb->dev->portnum; 699 int ret = 0; 700 struct vhci_device *vdev; 701 unsigned long flags; 702 703 if (portnum > VHCI_HC_PORTS) { 704 pr_err("invalid port number %d\n", portnum); 705 return -ENODEV; 706 } 707 vdev = &vhci_hcd->vdev[portnum-1]; 708 709 if (!urb->transfer_buffer && !urb->num_sgs && 710 urb->transfer_buffer_length) { 711 dev_dbg(dev, "Null URB transfer buffer\n"); 712 return -EINVAL; 713 } 714 715 spin_lock_irqsave(&vhci->lock, flags); 716 717 if (urb->status != -EINPROGRESS) { 718 dev_err(dev, "URB already unlinked!, status %d\n", urb->status); 719 spin_unlock_irqrestore(&vhci->lock, flags); 720 return urb->status; 721 } 722 723 /* refuse enqueue for dead connection */ 724 spin_lock(&vdev->ud.lock); 725 if (vdev->ud.status == VDEV_ST_NULL || 726 vdev->ud.status == VDEV_ST_ERROR) { 727 dev_err(dev, "enqueue for inactive port %d\n", vdev->rhport); 728 spin_unlock(&vdev->ud.lock); 729 spin_unlock_irqrestore(&vhci->lock, flags); 730 return -ENODEV; 731 } 732 spin_unlock(&vdev->ud.lock); 733 734 ret = usb_hcd_link_urb_to_ep(hcd, urb); 735 if (ret) 736 goto no_need_unlink; 737 738 /* 739 * The enumeration process is as follows; 740 * 741 * 1. Get_Descriptor request to DevAddrs(0) EndPoint(0) 742 * to get max packet length of default pipe 743 * 744 * 2. Set_Address request to DevAddr(0) EndPoint(0) 745 * 746 */ 747 if (usb_pipedevice(urb->pipe) == 0) { 748 struct usb_device *old; 749 __u8 type = usb_pipetype(urb->pipe); 750 struct usb_ctrlrequest *ctrlreq = 751 (struct usb_ctrlrequest *) urb->setup_packet; 752 753 if (type != PIPE_CONTROL || !ctrlreq) { 754 dev_err(dev, "invalid request to devnum 0\n"); 755 ret = -EINVAL; 756 goto no_need_xmit; 757 } 758 759 old = vdev->udev; 760 switch (ctrlreq->bRequest) { 761 case USB_REQ_SET_ADDRESS: 762 /* set_address may come when a device is reset */ 763 dev_info(dev, "SetAddress Request (%d) to port %d\n", 764 ctrlreq->wValue, vdev->rhport); 765 766 vdev->udev = usb_get_dev(urb->dev); 767 usb_put_dev(old); 768 769 spin_lock(&vdev->ud.lock); 770 vdev->ud.status = VDEV_ST_USED; 771 spin_unlock(&vdev->ud.lock); 772 773 if (urb->status == -EINPROGRESS) { 774 /* This request is successfully completed. */ 775 /* If not -EINPROGRESS, possibly unlinked. */ 776 urb->status = 0; 777 } 778 779 goto no_need_xmit; 780 781 case USB_REQ_GET_DESCRIPTOR: 782 if (ctrlreq->wValue == cpu_to_le16(USB_DT_DEVICE << 8)) 783 usbip_dbg_vhci_hc( 784 "Not yet?:Get_Descriptor to device 0 (get max pipe size)\n"); 785 786 vdev->udev = usb_get_dev(urb->dev); 787 usb_put_dev(old); 788 goto out; 789 790 default: 791 /* NOT REACHED */ 792 dev_err(dev, 793 "invalid request to devnum 0 bRequest %u, wValue %u\n", 794 ctrlreq->bRequest, 795 ctrlreq->wValue); 796 ret = -EINVAL; 797 goto no_need_xmit; 798 } 799 800 } 801 802 out: 803 vhci_tx_urb(urb, vdev); 804 spin_unlock_irqrestore(&vhci->lock, flags); 805 806 return 0; 807 808 no_need_xmit: 809 usb_hcd_unlink_urb_from_ep(hcd, urb); 810 no_need_unlink: 811 spin_unlock_irqrestore(&vhci->lock, flags); 812 if (!ret) { 813 /* usb_hcd_giveback_urb() should be called with 814 * irqs disabled 815 */ 816 local_irq_disable(); 817 usb_hcd_giveback_urb(hcd, urb, urb->status); 818 local_irq_enable(); 819 } 820 return ret; 821 } 822 823 /* 824 * vhci_rx gives back the urb after receiving the reply of the urb. If an 825 * unlink pdu is sent or not, vhci_rx receives a normal return pdu and gives 826 * back its urb. For the driver unlinking the urb, the content of the urb is 827 * not important, but the calling to its completion handler is important; the 828 * completion of unlinking is notified by the completion handler. 829 * 830 * 831 * CLIENT SIDE 832 * 833 * - When vhci_hcd receives RET_SUBMIT, 834 * 835 * - case 1a). the urb of the pdu is not unlinking. 836 * - normal case 837 * => just give back the urb 838 * 839 * - case 1b). the urb of the pdu is unlinking. 840 * - usbip.ko will return a reply of the unlinking request. 841 * => give back the urb now and go to case 2b). 842 * 843 * - When vhci_hcd receives RET_UNLINK, 844 * 845 * - case 2a). a submit request is still pending in vhci_hcd. 846 * - urb was really pending in usbip.ko and urb_unlink_urb() was 847 * completed there. 848 * => free a pending submit request 849 * => notify unlink completeness by giving back the urb 850 * 851 * - case 2b). a submit request is *not* pending in vhci_hcd. 852 * - urb was already given back to the core driver. 853 * => do not give back the urb 854 * 855 * 856 * SERVER SIDE 857 * 858 * - When usbip receives CMD_UNLINK, 859 * 860 * - case 3a). the urb of the unlink request is now in submission. 861 * => do usb_unlink_urb(). 862 * => after the unlink is completed, send RET_UNLINK. 863 * 864 * - case 3b). the urb of the unlink request is not in submission. 865 * - may be already completed or never be received 866 * => send RET_UNLINK 867 * 868 */ 869 static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) 870 { 871 struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); 872 struct vhci *vhci = vhci_hcd->vhci; 873 struct vhci_priv *priv; 874 struct vhci_device *vdev; 875 unsigned long flags; 876 877 spin_lock_irqsave(&vhci->lock, flags); 878 879 priv = urb->hcpriv; 880 if (!priv) { 881 /* URB was never linked! or will be soon given back by 882 * vhci_rx. */ 883 spin_unlock_irqrestore(&vhci->lock, flags); 884 return -EIDRM; 885 } 886 887 { 888 int ret = 0; 889 890 ret = usb_hcd_check_unlink_urb(hcd, urb, status); 891 if (ret) { 892 spin_unlock_irqrestore(&vhci->lock, flags); 893 return ret; 894 } 895 } 896 897 /* send unlink request here? */ 898 vdev = priv->vdev; 899 900 if (!vdev->ud.tcp_socket) { 901 /* tcp connection is closed */ 902 spin_lock(&vdev->priv_lock); 903 904 list_del(&priv->list); 905 kfree(priv); 906 urb->hcpriv = NULL; 907 908 spin_unlock(&vdev->priv_lock); 909 910 /* 911 * If tcp connection is alive, we have sent CMD_UNLINK. 912 * vhci_rx will receive RET_UNLINK and give back the URB. 913 * Otherwise, we give back it here. 914 */ 915 usb_hcd_unlink_urb_from_ep(hcd, urb); 916 917 spin_unlock_irqrestore(&vhci->lock, flags); 918 usb_hcd_giveback_urb(hcd, urb, urb->status); 919 spin_lock_irqsave(&vhci->lock, flags); 920 921 } else { 922 /* tcp connection is alive */ 923 struct vhci_unlink *unlink; 924 925 spin_lock(&vdev->priv_lock); 926 927 /* setup CMD_UNLINK pdu */ 928 unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC); 929 if (!unlink) { 930 spin_unlock(&vdev->priv_lock); 931 spin_unlock_irqrestore(&vhci->lock, flags); 932 usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC); 933 return -ENOMEM; 934 } 935 936 unlink->seqnum = atomic_inc_return(&vhci_hcd->seqnum); 937 if (unlink->seqnum == 0xffff) 938 pr_info("seqnum max\n"); 939 940 unlink->unlink_seqnum = priv->seqnum; 941 942 /* send cmd_unlink and try to cancel the pending URB in the 943 * peer */ 944 list_add_tail(&unlink->list, &vdev->unlink_tx); 945 wake_up(&vdev->waitq_tx); 946 947 spin_unlock(&vdev->priv_lock); 948 } 949 950 spin_unlock_irqrestore(&vhci->lock, flags); 951 952 usbip_dbg_vhci_hc("leave\n"); 953 return 0; 954 } 955 956 static void vhci_cleanup_unlink_list(struct vhci_device *vdev, 957 struct list_head *unlink_list) 958 { 959 struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev); 960 struct usb_hcd *hcd = vhci_hcd_to_hcd(vhci_hcd); 961 struct vhci *vhci = vhci_hcd->vhci; 962 struct vhci_unlink *unlink, *tmp; 963 unsigned long flags; 964 965 spin_lock_irqsave(&vhci->lock, flags); 966 spin_lock(&vdev->priv_lock); 967 968 list_for_each_entry_safe(unlink, tmp, unlink_list, list) { 969 struct urb *urb; 970 971 urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum); 972 if (!urb) { 973 list_del(&unlink->list); 974 kfree(unlink); 975 continue; 976 } 977 978 urb->status = -ENODEV; 979 980 usb_hcd_unlink_urb_from_ep(hcd, urb); 981 982 list_del(&unlink->list); 983 984 spin_unlock(&vdev->priv_lock); 985 spin_unlock_irqrestore(&vhci->lock, flags); 986 987 usb_hcd_giveback_urb(hcd, urb, urb->status); 988 989 spin_lock_irqsave(&vhci->lock, flags); 990 spin_lock(&vdev->priv_lock); 991 992 kfree(unlink); 993 } 994 995 spin_unlock(&vdev->priv_lock); 996 spin_unlock_irqrestore(&vhci->lock, flags); 997 } 998 999 static void vhci_device_unlink_cleanup(struct vhci_device *vdev) 1000 { 1001 /* give back URB of unsent unlink request */ 1002 vhci_cleanup_unlink_list(vdev, &vdev->unlink_tx); 1003 1004 /* give back URB of unanswered unlink request */ 1005 vhci_cleanup_unlink_list(vdev, &vdev->unlink_rx); 1006 } 1007 1008 /* 1009 * The important thing is that only one context begins cleanup. 1010 * This is why error handling and cleanup become simple. 1011 * We do not want to consider race condition as possible. 1012 */ 1013 static void vhci_shutdown_connection(struct usbip_device *ud) 1014 { 1015 struct vhci_device *vdev = container_of(ud, struct vhci_device, ud); 1016 1017 /* need this? see stub_dev.c */ 1018 if (ud->tcp_socket) { 1019 pr_debug("shutdown tcp_socket %d\n", ud->sockfd); 1020 kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR); 1021 } 1022 1023 /* kill threads related to this sdev */ 1024 if (vdev->ud.tcp_rx) { 1025 kthread_stop_put(vdev->ud.tcp_rx); 1026 vdev->ud.tcp_rx = NULL; 1027 } 1028 if (vdev->ud.tcp_tx) { 1029 kthread_stop_put(vdev->ud.tcp_tx); 1030 vdev->ud.tcp_tx = NULL; 1031 } 1032 pr_info("stop threads\n"); 1033 1034 /* active connection is closed */ 1035 if (vdev->ud.tcp_socket) { 1036 sockfd_put(vdev->ud.tcp_socket); 1037 vdev->ud.tcp_socket = NULL; 1038 vdev->ud.sockfd = -1; 1039 } 1040 pr_info("release socket\n"); 1041 1042 vhci_device_unlink_cleanup(vdev); 1043 1044 /* 1045 * rh_port_disconnect() is a trigger of ... 1046 * usb_disable_device(): 1047 * disable all the endpoints for a USB device. 1048 * usb_disable_endpoint(): 1049 * disable endpoints. pending urbs are unlinked(dequeued). 1050 * 1051 * NOTE: After calling rh_port_disconnect(), the USB device drivers of a 1052 * detached device should release used urbs in a cleanup function (i.e. 1053 * xxx_disconnect()). Therefore, vhci_hcd does not need to release 1054 * pushed urbs and their private data in this function. 1055 * 1056 * NOTE: vhci_dequeue() must be considered carefully. When shutting down 1057 * a connection, vhci_shutdown_connection() expects vhci_dequeue() 1058 * gives back pushed urbs and frees their private data by request of 1059 * the cleanup function of a USB driver. When unlinking a urb with an 1060 * active connection, vhci_dequeue() does not give back the urb which 1061 * is actually given back by vhci_rx after receiving its return pdu. 1062 * 1063 */ 1064 rh_port_disconnect(vdev); 1065 1066 pr_info("disconnect device\n"); 1067 } 1068 1069 static void vhci_device_reset(struct usbip_device *ud) 1070 { 1071 struct vhci_device *vdev = container_of(ud, struct vhci_device, ud); 1072 struct usb_device *old = vdev->udev; 1073 unsigned long flags; 1074 1075 spin_lock_irqsave(&ud->lock, flags); 1076 1077 vdev->speed = 0; 1078 vdev->devid = 0; 1079 1080 vdev->udev = NULL; 1081 usb_put_dev(old); 1082 1083 if (ud->tcp_socket) { 1084 sockfd_put(ud->tcp_socket); 1085 ud->tcp_socket = NULL; 1086 ud->sockfd = -1; 1087 } 1088 ud->status = VDEV_ST_NULL; 1089 1090 spin_unlock_irqrestore(&ud->lock, flags); 1091 } 1092 1093 static void vhci_device_unusable(struct usbip_device *ud) 1094 { 1095 unsigned long flags; 1096 1097 spin_lock_irqsave(&ud->lock, flags); 1098 ud->status = VDEV_ST_ERROR; 1099 spin_unlock_irqrestore(&ud->lock, flags); 1100 } 1101 1102 static void vhci_device_init(struct vhci_device *vdev) 1103 { 1104 memset(vdev, 0, sizeof(struct vhci_device)); 1105 1106 vdev->ud.side = USBIP_VHCI; 1107 vdev->ud.status = VDEV_ST_NULL; 1108 spin_lock_init(&vdev->ud.lock); 1109 mutex_init(&vdev->ud.sysfs_lock); 1110 1111 INIT_LIST_HEAD(&vdev->priv_rx); 1112 INIT_LIST_HEAD(&vdev->priv_tx); 1113 INIT_LIST_HEAD(&vdev->unlink_tx); 1114 INIT_LIST_HEAD(&vdev->unlink_rx); 1115 spin_lock_init(&vdev->priv_lock); 1116 1117 init_waitqueue_head(&vdev->waitq_tx); 1118 1119 vdev->ud.eh_ops.shutdown = vhci_shutdown_connection; 1120 vdev->ud.eh_ops.reset = vhci_device_reset; 1121 vdev->ud.eh_ops.unusable = vhci_device_unusable; 1122 1123 usbip_start_eh(&vdev->ud); 1124 } 1125 1126 static int hcd_name_to_id(const char *name) 1127 { 1128 char *c; 1129 long val; 1130 int ret; 1131 1132 c = strchr(name, '.'); 1133 if (c == NULL) 1134 return 0; 1135 1136 ret = kstrtol(c+1, 10, &val); 1137 if (ret < 0) 1138 return ret; 1139 1140 return val; 1141 } 1142 1143 static int vhci_setup(struct usb_hcd *hcd) 1144 { 1145 struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller)); 1146 1147 if (usb_hcd_is_primary_hcd(hcd)) { 1148 vhci->vhci_hcd_hs = hcd_to_vhci_hcd(hcd); 1149 vhci->vhci_hcd_hs->vhci = vhci; 1150 /* 1151 * Mark the first roothub as being USB 2.0. 1152 * The USB 3.0 roothub will be registered later by 1153 * vhci_hcd_probe() 1154 */ 1155 hcd->speed = HCD_USB2; 1156 hcd->self.root_hub->speed = USB_SPEED_HIGH; 1157 } else { 1158 vhci->vhci_hcd_ss = hcd_to_vhci_hcd(hcd); 1159 vhci->vhci_hcd_ss->vhci = vhci; 1160 hcd->speed = HCD_USB3; 1161 hcd->self.root_hub->speed = USB_SPEED_SUPER; 1162 } 1163 1164 /* 1165 * Support SG. 1166 * sg_tablesize is an arbitrary value to alleviate memory pressure 1167 * on the host. 1168 */ 1169 hcd->self.sg_tablesize = 32; 1170 hcd->self.no_sg_constraint = 1; 1171 1172 return 0; 1173 } 1174 1175 static int vhci_start(struct usb_hcd *hcd) 1176 { 1177 struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); 1178 int id, rhport; 1179 int err; 1180 1181 usbip_dbg_vhci_hc("enter vhci_start\n"); 1182 1183 if (usb_hcd_is_primary_hcd(hcd)) 1184 spin_lock_init(&vhci_hcd->vhci->lock); 1185 1186 /* initialize private data of usb_hcd */ 1187 1188 for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { 1189 struct vhci_device *vdev = &vhci_hcd->vdev[rhport]; 1190 1191 vhci_device_init(vdev); 1192 vdev->rhport = rhport; 1193 } 1194 1195 atomic_set(&vhci_hcd->seqnum, 0); 1196 1197 hcd->power_budget = 0; /* no limit */ 1198 hcd->uses_new_polling = 1; 1199 1200 #ifdef CONFIG_USB_OTG 1201 hcd->self.otg_port = 1; 1202 #endif 1203 1204 id = hcd_name_to_id(hcd_name(hcd)); 1205 if (id < 0) { 1206 pr_err("invalid vhci name %s\n", hcd_name(hcd)); 1207 return -EINVAL; 1208 } 1209 1210 /* vhci_hcd is now ready to be controlled through sysfs */ 1211 if (id == 0 && usb_hcd_is_primary_hcd(hcd)) { 1212 err = vhci_init_attr_group(); 1213 if (err) { 1214 dev_err(hcd_dev(hcd), "init attr group failed, err = %d\n", err); 1215 return err; 1216 } 1217 err = sysfs_create_group(&hcd_dev(hcd)->kobj, &vhci_attr_group); 1218 if (err) { 1219 dev_err(hcd_dev(hcd), "create sysfs files failed, err = %d\n", err); 1220 vhci_finish_attr_group(); 1221 return err; 1222 } 1223 pr_info("created sysfs %s\n", hcd_name(hcd)); 1224 } 1225 1226 return 0; 1227 } 1228 1229 static void vhci_stop(struct usb_hcd *hcd) 1230 { 1231 struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); 1232 int id, rhport; 1233 1234 usbip_dbg_vhci_hc("stop VHCI controller\n"); 1235 1236 /* 1. remove the userland interface of vhci_hcd */ 1237 id = hcd_name_to_id(hcd_name(hcd)); 1238 if (id == 0 && usb_hcd_is_primary_hcd(hcd)) { 1239 sysfs_remove_group(&hcd_dev(hcd)->kobj, &vhci_attr_group); 1240 vhci_finish_attr_group(); 1241 } 1242 1243 /* 2. shutdown all the ports of vhci_hcd */ 1244 for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { 1245 struct vhci_device *vdev = &vhci_hcd->vdev[rhport]; 1246 1247 usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED); 1248 usbip_stop_eh(&vdev->ud); 1249 } 1250 } 1251 1252 static int vhci_get_frame_number(struct usb_hcd *hcd) 1253 { 1254 dev_err_ratelimited(&hcd->self.root_hub->dev, "Not yet implemented\n"); 1255 return 0; 1256 } 1257 1258 #ifdef CONFIG_PM 1259 1260 /* FIXME: suspend/resume */ 1261 static int vhci_bus_suspend(struct usb_hcd *hcd) 1262 { 1263 struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller)); 1264 unsigned long flags; 1265 1266 dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); 1267 1268 spin_lock_irqsave(&vhci->lock, flags); 1269 hcd->state = HC_STATE_SUSPENDED; 1270 spin_unlock_irqrestore(&vhci->lock, flags); 1271 1272 return 0; 1273 } 1274 1275 static int vhci_bus_resume(struct usb_hcd *hcd) 1276 { 1277 struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller)); 1278 int rc = 0; 1279 unsigned long flags; 1280 1281 dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); 1282 1283 spin_lock_irqsave(&vhci->lock, flags); 1284 if (!HCD_HW_ACCESSIBLE(hcd)) 1285 rc = -ESHUTDOWN; 1286 else 1287 hcd->state = HC_STATE_RUNNING; 1288 spin_unlock_irqrestore(&vhci->lock, flags); 1289 1290 return rc; 1291 } 1292 1293 #else 1294 1295 #define vhci_bus_suspend NULL 1296 #define vhci_bus_resume NULL 1297 #endif 1298 1299 /* Change a group of bulk endpoints to support multiple stream IDs */ 1300 static int vhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, 1301 struct usb_host_endpoint **eps, unsigned int num_eps, 1302 unsigned int num_streams, gfp_t mem_flags) 1303 { 1304 dev_dbg(&hcd->self.root_hub->dev, "vhci_alloc_streams not implemented\n"); 1305 return 0; 1306 } 1307 1308 /* Reverts a group of bulk endpoints back to not using stream IDs. */ 1309 static int vhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, 1310 struct usb_host_endpoint **eps, unsigned int num_eps, 1311 gfp_t mem_flags) 1312 { 1313 dev_dbg(&hcd->self.root_hub->dev, "vhci_free_streams not implemented\n"); 1314 return 0; 1315 } 1316 1317 static const struct hc_driver vhci_hc_driver = { 1318 .description = driver_name, 1319 .product_desc = driver_desc, 1320 .hcd_priv_size = sizeof(struct vhci_hcd), 1321 1322 .flags = HCD_USB3 | HCD_SHARED, 1323 1324 .reset = vhci_setup, 1325 .start = vhci_start, 1326 .stop = vhci_stop, 1327 1328 .urb_enqueue = vhci_urb_enqueue, 1329 .urb_dequeue = vhci_urb_dequeue, 1330 1331 .get_frame_number = vhci_get_frame_number, 1332 1333 .hub_status_data = vhci_hub_status, 1334 .hub_control = vhci_hub_control, 1335 .bus_suspend = vhci_bus_suspend, 1336 .bus_resume = vhci_bus_resume, 1337 1338 .alloc_streams = vhci_alloc_streams, 1339 .free_streams = vhci_free_streams, 1340 }; 1341 1342 static int vhci_hcd_probe(struct platform_device *pdev) 1343 { 1344 struct vhci *vhci = *((void **)dev_get_platdata(&pdev->dev)); 1345 struct usb_hcd *hcd_hs; 1346 struct usb_hcd *hcd_ss; 1347 int ret; 1348 1349 usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id); 1350 1351 /* 1352 * Allocate and initialize hcd. 1353 * Our private data is also allocated automatically. 1354 */ 1355 hcd_hs = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev)); 1356 if (!hcd_hs) { 1357 pr_err("create primary hcd failed\n"); 1358 return -ENOMEM; 1359 } 1360 hcd_hs->has_tt = 1; 1361 1362 /* 1363 * Finish generic HCD structure initialization and register. 1364 * Call the driver's reset() and start() routines. 1365 */ 1366 ret = usb_add_hcd(hcd_hs, 0, 0); 1367 if (ret != 0) { 1368 pr_err("usb_add_hcd hs failed %d\n", ret); 1369 goto put_usb2_hcd; 1370 } 1371 1372 hcd_ss = usb_create_shared_hcd(&vhci_hc_driver, &pdev->dev, 1373 dev_name(&pdev->dev), hcd_hs); 1374 if (!hcd_ss) { 1375 ret = -ENOMEM; 1376 pr_err("create shared hcd failed\n"); 1377 goto remove_usb2_hcd; 1378 } 1379 1380 ret = usb_add_hcd(hcd_ss, 0, 0); 1381 if (ret) { 1382 pr_err("usb_add_hcd ss failed %d\n", ret); 1383 goto put_usb3_hcd; 1384 } 1385 1386 usbip_dbg_vhci_hc("bye\n"); 1387 return 0; 1388 1389 put_usb3_hcd: 1390 usb_put_hcd(hcd_ss); 1391 remove_usb2_hcd: 1392 usb_remove_hcd(hcd_hs); 1393 put_usb2_hcd: 1394 usb_put_hcd(hcd_hs); 1395 vhci->vhci_hcd_hs = NULL; 1396 vhci->vhci_hcd_ss = NULL; 1397 return ret; 1398 } 1399 1400 static void vhci_hcd_remove(struct platform_device *pdev) 1401 { 1402 struct vhci *vhci = *((void **)dev_get_platdata(&pdev->dev)); 1403 1404 /* 1405 * Disconnects the root hub, 1406 * then reverses the effects of usb_add_hcd(), 1407 * invoking the HCD's stop() methods. 1408 */ 1409 usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss)); 1410 usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss)); 1411 1412 usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs)); 1413 usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs)); 1414 1415 vhci->vhci_hcd_hs = NULL; 1416 vhci->vhci_hcd_ss = NULL; 1417 } 1418 1419 #ifdef CONFIG_PM 1420 1421 /* what should happen for USB/IP under suspend/resume? */ 1422 static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state) 1423 { 1424 struct usb_hcd *hcd; 1425 struct vhci *vhci; 1426 int rhport; 1427 int connected = 0; 1428 int ret = 0; 1429 unsigned long flags; 1430 1431 dev_dbg(&pdev->dev, "%s\n", __func__); 1432 1433 hcd = platform_get_drvdata(pdev); 1434 if (!hcd) 1435 return 0; 1436 1437 vhci = *((void **)dev_get_platdata(hcd->self.controller)); 1438 1439 spin_lock_irqsave(&vhci->lock, flags); 1440 1441 for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { 1442 if (vhci->vhci_hcd_hs->port_status[rhport] & 1443 USB_PORT_STAT_CONNECTION) 1444 connected += 1; 1445 1446 if (vhci->vhci_hcd_ss->port_status[rhport] & 1447 USB_PORT_STAT_CONNECTION) 1448 connected += 1; 1449 } 1450 1451 spin_unlock_irqrestore(&vhci->lock, flags); 1452 1453 if (connected > 0) { 1454 dev_info(&pdev->dev, 1455 "We have %d active connection%s. Do not suspend.\n", 1456 connected, (connected == 1 ? "" : "s")); 1457 ret = -EBUSY; 1458 } else { 1459 dev_info(&pdev->dev, "suspend vhci_hcd"); 1460 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 1461 } 1462 1463 return ret; 1464 } 1465 1466 static int vhci_hcd_resume(struct platform_device *pdev) 1467 { 1468 struct usb_hcd *hcd; 1469 1470 dev_dbg(&pdev->dev, "%s\n", __func__); 1471 1472 hcd = platform_get_drvdata(pdev); 1473 if (!hcd) 1474 return 0; 1475 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 1476 usb_hcd_poll_rh_status(hcd); 1477 1478 return 0; 1479 } 1480 1481 #else 1482 1483 #define vhci_hcd_suspend NULL 1484 #define vhci_hcd_resume NULL 1485 1486 #endif 1487 1488 static struct platform_driver vhci_driver = { 1489 .probe = vhci_hcd_probe, 1490 .remove_new = vhci_hcd_remove, 1491 .suspend = vhci_hcd_suspend, 1492 .resume = vhci_hcd_resume, 1493 .driver = { 1494 .name = driver_name, 1495 }, 1496 }; 1497 1498 static void del_platform_devices(void) 1499 { 1500 int i; 1501 1502 for (i = 0; i < vhci_num_controllers; i++) { 1503 platform_device_unregister(vhcis[i].pdev); 1504 vhcis[i].pdev = NULL; 1505 } 1506 sysfs_remove_link(&platform_bus.kobj, driver_name); 1507 } 1508 1509 static int __init vhci_hcd_init(void) 1510 { 1511 int i, ret; 1512 1513 if (usb_disabled()) 1514 return -ENODEV; 1515 1516 if (vhci_num_controllers < 1) 1517 vhci_num_controllers = 1; 1518 1519 vhcis = kcalloc(vhci_num_controllers, sizeof(struct vhci), GFP_KERNEL); 1520 if (vhcis == NULL) 1521 return -ENOMEM; 1522 1523 ret = platform_driver_register(&vhci_driver); 1524 if (ret) 1525 goto err_driver_register; 1526 1527 for (i = 0; i < vhci_num_controllers; i++) { 1528 void *vhci = &vhcis[i]; 1529 struct platform_device_info pdevinfo = { 1530 .name = driver_name, 1531 .id = i, 1532 .data = &vhci, 1533 .size_data = sizeof(void *), 1534 }; 1535 1536 vhcis[i].pdev = platform_device_register_full(&pdevinfo); 1537 ret = PTR_ERR_OR_ZERO(vhcis[i].pdev); 1538 if (ret < 0) { 1539 while (i--) 1540 platform_device_unregister(vhcis[i].pdev); 1541 goto err_add_hcd; 1542 } 1543 } 1544 1545 return 0; 1546 1547 err_add_hcd: 1548 platform_driver_unregister(&vhci_driver); 1549 err_driver_register: 1550 kfree(vhcis); 1551 return ret; 1552 } 1553 1554 static void __exit vhci_hcd_exit(void) 1555 { 1556 del_platform_devices(); 1557 platform_driver_unregister(&vhci_driver); 1558 kfree(vhcis); 1559 } 1560 1561 module_init(vhci_hcd_init); 1562 module_exit(vhci_hcd_exit); 1563 1564 MODULE_AUTHOR(DRIVER_AUTHOR); 1565 MODULE_DESCRIPTION(DRIVER_DESC); 1566 MODULE_LICENSE("GPL"); 1567