xref: /linux/drivers/usb/usbip/stub_rx.c (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1 /*
2  * Copyright (C) 2003-2008 Takahiro Hirofuchi
3  *
4  * This is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License as published by
6  * the Free Software Foundation; either version 2 of the License, or
7  * (at your option) any later version.
8  *
9  * This is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  * GNU General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, write to the Free Software
16  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
17  * USA.
18  */
19 
20 #include <asm/byteorder.h>
21 #include <linux/kthread.h>
22 #include <linux/usb.h>
23 #include <linux/usb/hcd.h>
24 
25 #include "usbip_common.h"
26 #include "stub.h"
27 
28 static int is_clear_halt_cmd(struct urb *urb)
29 {
30 	struct usb_ctrlrequest *req;
31 
32 	req = (struct usb_ctrlrequest *) urb->setup_packet;
33 
34 	 return (req->bRequest == USB_REQ_CLEAR_FEATURE) &&
35 		 (req->bRequestType == USB_RECIP_ENDPOINT) &&
36 		 (req->wValue == USB_ENDPOINT_HALT);
37 }
38 
39 static int is_set_interface_cmd(struct urb *urb)
40 {
41 	struct usb_ctrlrequest *req;
42 
43 	req = (struct usb_ctrlrequest *) urb->setup_packet;
44 
45 	return (req->bRequest == USB_REQ_SET_INTERFACE) &&
46 		(req->bRequestType == USB_RECIP_INTERFACE);
47 }
48 
49 static int is_set_configuration_cmd(struct urb *urb)
50 {
51 	struct usb_ctrlrequest *req;
52 
53 	req = (struct usb_ctrlrequest *) urb->setup_packet;
54 
55 	return (req->bRequest == USB_REQ_SET_CONFIGURATION) &&
56 		(req->bRequestType == USB_RECIP_DEVICE);
57 }
58 
59 static int is_reset_device_cmd(struct urb *urb)
60 {
61 	struct usb_ctrlrequest *req;
62 	__u16 value;
63 	__u16 index;
64 
65 	req = (struct usb_ctrlrequest *) urb->setup_packet;
66 	value = le16_to_cpu(req->wValue);
67 	index = le16_to_cpu(req->wIndex);
68 
69 	if ((req->bRequest == USB_REQ_SET_FEATURE) &&
70 	    (req->bRequestType == USB_RT_PORT) &&
71 	    (value == USB_PORT_FEAT_RESET)) {
72 		usbip_dbg_stub_rx("reset_device_cmd, port %u\n", index);
73 		return 1;
74 	} else
75 		return 0;
76 }
77 
78 static int tweak_clear_halt_cmd(struct urb *urb)
79 {
80 	struct usb_ctrlrequest *req;
81 	int target_endp;
82 	int target_dir;
83 	int target_pipe;
84 	int ret;
85 
86 	req = (struct usb_ctrlrequest *) urb->setup_packet;
87 
88 	/*
89 	 * The stalled endpoint is specified in the wIndex value. The endpoint
90 	 * of the urb is the target of this clear_halt request (i.e., control
91 	 * endpoint).
92 	 */
93 	target_endp = le16_to_cpu(req->wIndex) & 0x000f;
94 
95 	/* the stalled endpoint direction is IN or OUT?. USB_DIR_IN is 0x80.  */
96 	target_dir = le16_to_cpu(req->wIndex) & 0x0080;
97 
98 	if (target_dir)
99 		target_pipe = usb_rcvctrlpipe(urb->dev, target_endp);
100 	else
101 		target_pipe = usb_sndctrlpipe(urb->dev, target_endp);
102 
103 	ret = usb_clear_halt(urb->dev, target_pipe);
104 	if (ret < 0)
105 		dev_err(&urb->dev->dev,
106 			"usb_clear_halt error: devnum %d endp %d ret %d\n",
107 			urb->dev->devnum, target_endp, ret);
108 	else
109 		dev_info(&urb->dev->dev,
110 			 "usb_clear_halt done: devnum %d endp %d\n",
111 			 urb->dev->devnum, target_endp);
112 
113 	return ret;
114 }
115 
116 static int tweak_set_interface_cmd(struct urb *urb)
117 {
118 	struct usb_ctrlrequest *req;
119 	__u16 alternate;
120 	__u16 interface;
121 	int ret;
122 
123 	req = (struct usb_ctrlrequest *) urb->setup_packet;
124 	alternate = le16_to_cpu(req->wValue);
125 	interface = le16_to_cpu(req->wIndex);
126 
127 	usbip_dbg_stub_rx("set_interface: inf %u alt %u\n",
128 			  interface, alternate);
129 
130 	ret = usb_set_interface(urb->dev, interface, alternate);
131 	if (ret < 0)
132 		dev_err(&urb->dev->dev,
133 			"usb_set_interface error: inf %u alt %u ret %d\n",
134 			interface, alternate, ret);
135 	else
136 		dev_info(&urb->dev->dev,
137 			"usb_set_interface done: inf %u alt %u\n",
138 			interface, alternate);
139 
140 	return ret;
141 }
142 
143 static int tweak_set_configuration_cmd(struct urb *urb)
144 {
145 	struct stub_priv *priv = (struct stub_priv *) urb->context;
146 	struct stub_device *sdev = priv->sdev;
147 	struct usb_ctrlrequest *req;
148 	__u16 config;
149 	int err;
150 
151 	req = (struct usb_ctrlrequest *) urb->setup_packet;
152 	config = le16_to_cpu(req->wValue);
153 
154 	err = usb_set_configuration(sdev->udev, config);
155 	if (err && err != -ENODEV)
156 		dev_err(&sdev->udev->dev, "can't set config #%d, error %d\n",
157 			config, err);
158 	return 0;
159 }
160 
161 static int tweak_reset_device_cmd(struct urb *urb)
162 {
163 	struct stub_priv *priv = (struct stub_priv *) urb->context;
164 	struct stub_device *sdev = priv->sdev;
165 
166 	dev_info(&urb->dev->dev, "usb_queue_reset_device\n");
167 
168 	/*
169 	 * With the implementation of pre_reset and post_reset the driver no
170 	 * longer unbinds. This allows the use of synchronous reset.
171 	 */
172 
173 	if (usb_lock_device_for_reset(sdev->udev, sdev->interface) < 0) {
174 		dev_err(&urb->dev->dev, "could not obtain lock to reset device\n");
175 		return 0;
176 	}
177 	usb_reset_device(sdev->udev);
178 	usb_unlock_device(sdev->udev);
179 
180 	return 0;
181 }
182 
183 /*
184  * clear_halt, set_interface, and set_configuration require special tricks.
185  */
186 static void tweak_special_requests(struct urb *urb)
187 {
188 	if (!urb || !urb->setup_packet)
189 		return;
190 
191 	if (usb_pipetype(urb->pipe) != PIPE_CONTROL)
192 		return;
193 
194 	if (is_clear_halt_cmd(urb))
195 		/* tweak clear_halt */
196 		 tweak_clear_halt_cmd(urb);
197 
198 	else if (is_set_interface_cmd(urb))
199 		/* tweak set_interface */
200 		tweak_set_interface_cmd(urb);
201 
202 	else if (is_set_configuration_cmd(urb))
203 		/* tweak set_configuration */
204 		tweak_set_configuration_cmd(urb);
205 
206 	else if (is_reset_device_cmd(urb))
207 		tweak_reset_device_cmd(urb);
208 	else
209 		usbip_dbg_stub_rx("no need to tweak\n");
210 }
211 
212 /*
213  * stub_recv_unlink() unlinks the URB by a call to usb_unlink_urb().
214  * By unlinking the urb asynchronously, stub_rx can continuously
215  * process coming urbs.  Even if the urb is unlinked, its completion
216  * handler will be called and stub_tx will send a return pdu.
217  *
218  * See also comments about unlinking strategy in vhci_hcd.c.
219  */
220 static int stub_recv_cmd_unlink(struct stub_device *sdev,
221 				struct usbip_header *pdu)
222 {
223 	int ret;
224 	unsigned long flags;
225 	struct stub_priv *priv;
226 
227 	spin_lock_irqsave(&sdev->priv_lock, flags);
228 
229 	list_for_each_entry(priv, &sdev->priv_init, list) {
230 		if (priv->seqnum != pdu->u.cmd_unlink.seqnum)
231 			continue;
232 
233 		dev_info(&priv->urb->dev->dev, "unlink urb %p\n",
234 			 priv->urb);
235 
236 		/*
237 		 * This matched urb is not completed yet (i.e., be in
238 		 * flight in usb hcd hardware/driver). Now we are
239 		 * cancelling it. The unlinking flag means that we are
240 		 * now not going to return the normal result pdu of a
241 		 * submission request, but going to return a result pdu
242 		 * of the unlink request.
243 		 */
244 		priv->unlinking = 1;
245 
246 		/*
247 		 * In the case that unlinking flag is on, prev->seqnum
248 		 * is changed from the seqnum of the cancelling urb to
249 		 * the seqnum of the unlink request. This will be used
250 		 * to make the result pdu of the unlink request.
251 		 */
252 		priv->seqnum = pdu->base.seqnum;
253 
254 		spin_unlock_irqrestore(&sdev->priv_lock, flags);
255 
256 		/*
257 		 * usb_unlink_urb() is now out of spinlocking to avoid
258 		 * spinlock recursion since stub_complete() is
259 		 * sometimes called in this context but not in the
260 		 * interrupt context.  If stub_complete() is executed
261 		 * before we call usb_unlink_urb(), usb_unlink_urb()
262 		 * will return an error value. In this case, stub_tx
263 		 * will return the result pdu of this unlink request
264 		 * though submission is completed and actual unlinking
265 		 * is not executed. OK?
266 		 */
267 		/* In the above case, urb->status is not -ECONNRESET,
268 		 * so a driver in a client host will know the failure
269 		 * of the unlink request ?
270 		 */
271 		ret = usb_unlink_urb(priv->urb);
272 		if (ret != -EINPROGRESS)
273 			dev_err(&priv->urb->dev->dev,
274 				"failed to unlink a urb %p, ret %d\n",
275 				priv->urb, ret);
276 
277 		return 0;
278 	}
279 
280 	usbip_dbg_stub_rx("seqnum %d is not pending\n",
281 			  pdu->u.cmd_unlink.seqnum);
282 
283 	/*
284 	 * The urb of the unlink target is not found in priv_init queue. It was
285 	 * already completed and its results is/was going to be sent by a
286 	 * CMD_RET pdu. In this case, usb_unlink_urb() is not needed. We only
287 	 * return the completeness of this unlink request to vhci_hcd.
288 	 */
289 	stub_enqueue_ret_unlink(sdev, pdu->base.seqnum, 0);
290 
291 	spin_unlock_irqrestore(&sdev->priv_lock, flags);
292 
293 	return 0;
294 }
295 
296 static int valid_request(struct stub_device *sdev, struct usbip_header *pdu)
297 {
298 	struct usbip_device *ud = &sdev->ud;
299 	int valid = 0;
300 
301 	if (pdu->base.devid == sdev->devid) {
302 		spin_lock_irq(&ud->lock);
303 		if (ud->status == SDEV_ST_USED) {
304 			/* A request is valid. */
305 			valid = 1;
306 		}
307 		spin_unlock_irq(&ud->lock);
308 	}
309 
310 	return valid;
311 }
312 
313 static struct stub_priv *stub_priv_alloc(struct stub_device *sdev,
314 					 struct usbip_header *pdu)
315 {
316 	struct stub_priv *priv;
317 	struct usbip_device *ud = &sdev->ud;
318 	unsigned long flags;
319 
320 	spin_lock_irqsave(&sdev->priv_lock, flags);
321 
322 	priv = kmem_cache_zalloc(stub_priv_cache, GFP_ATOMIC);
323 	if (!priv) {
324 		dev_err(&sdev->interface->dev, "alloc stub_priv\n");
325 		spin_unlock_irqrestore(&sdev->priv_lock, flags);
326 		usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
327 		return NULL;
328 	}
329 
330 	priv->seqnum = pdu->base.seqnum;
331 	priv->sdev = sdev;
332 
333 	/*
334 	 * After a stub_priv is linked to a list_head,
335 	 * our error handler can free allocated data.
336 	 */
337 	list_add_tail(&priv->list, &sdev->priv_init);
338 
339 	spin_unlock_irqrestore(&sdev->priv_lock, flags);
340 
341 	return priv;
342 }
343 
344 static int get_pipe(struct stub_device *sdev, int epnum, int dir)
345 {
346 	struct usb_device *udev = sdev->udev;
347 	struct usb_host_endpoint *ep;
348 	struct usb_endpoint_descriptor *epd = NULL;
349 
350 	if (dir == USBIP_DIR_IN)
351 		ep = udev->ep_in[epnum & 0x7f];
352 	else
353 		ep = udev->ep_out[epnum & 0x7f];
354 	if (!ep) {
355 		dev_err(&sdev->interface->dev, "no such endpoint?, %d\n",
356 			epnum);
357 		BUG();
358 	}
359 
360 	epd = &ep->desc;
361 	if (usb_endpoint_xfer_control(epd)) {
362 		if (dir == USBIP_DIR_OUT)
363 			return usb_sndctrlpipe(udev, epnum);
364 		else
365 			return usb_rcvctrlpipe(udev, epnum);
366 	}
367 
368 	if (usb_endpoint_xfer_bulk(epd)) {
369 		if (dir == USBIP_DIR_OUT)
370 			return usb_sndbulkpipe(udev, epnum);
371 		else
372 			return usb_rcvbulkpipe(udev, epnum);
373 	}
374 
375 	if (usb_endpoint_xfer_int(epd)) {
376 		if (dir == USBIP_DIR_OUT)
377 			return usb_sndintpipe(udev, epnum);
378 		else
379 			return usb_rcvintpipe(udev, epnum);
380 	}
381 
382 	if (usb_endpoint_xfer_isoc(epd)) {
383 		if (dir == USBIP_DIR_OUT)
384 			return usb_sndisocpipe(udev, epnum);
385 		else
386 			return usb_rcvisocpipe(udev, epnum);
387 	}
388 
389 	/* NOT REACHED */
390 	dev_err(&sdev->interface->dev, "get pipe, epnum %d\n", epnum);
391 	return 0;
392 }
393 
394 static void masking_bogus_flags(struct urb *urb)
395 {
396 	int				xfertype;
397 	struct usb_device		*dev;
398 	struct usb_host_endpoint	*ep;
399 	int				is_out;
400 	unsigned int	allowed;
401 
402 	if (!urb || urb->hcpriv || !urb->complete)
403 		return;
404 	dev = urb->dev;
405 	if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
406 		return;
407 
408 	ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out)
409 		[usb_pipeendpoint(urb->pipe)];
410 	if (!ep)
411 		return;
412 
413 	xfertype = usb_endpoint_type(&ep->desc);
414 	if (xfertype == USB_ENDPOINT_XFER_CONTROL) {
415 		struct usb_ctrlrequest *setup =
416 			(struct usb_ctrlrequest *) urb->setup_packet;
417 
418 		if (!setup)
419 			return;
420 		is_out = !(setup->bRequestType & USB_DIR_IN) ||
421 			!setup->wLength;
422 	} else {
423 		is_out = usb_endpoint_dir_out(&ep->desc);
424 	}
425 
426 	/* enforce simple/standard policy */
427 	allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT |
428 		   URB_DIR_MASK | URB_FREE_BUFFER);
429 	switch (xfertype) {
430 	case USB_ENDPOINT_XFER_BULK:
431 		if (is_out)
432 			allowed |= URB_ZERO_PACKET;
433 		/* FALLTHROUGH */
434 	case USB_ENDPOINT_XFER_CONTROL:
435 		allowed |= URB_NO_FSBR;	/* only affects UHCI */
436 		/* FALLTHROUGH */
437 	default:			/* all non-iso endpoints */
438 		if (!is_out)
439 			allowed |= URB_SHORT_NOT_OK;
440 		break;
441 	case USB_ENDPOINT_XFER_ISOC:
442 		allowed |= URB_ISO_ASAP;
443 		break;
444 	}
445 	urb->transfer_flags &= allowed;
446 }
447 
448 static void stub_recv_cmd_submit(struct stub_device *sdev,
449 				 struct usbip_header *pdu)
450 {
451 	int ret;
452 	struct stub_priv *priv;
453 	struct usbip_device *ud = &sdev->ud;
454 	struct usb_device *udev = sdev->udev;
455 	int pipe = get_pipe(sdev, pdu->base.ep, pdu->base.direction);
456 
457 	priv = stub_priv_alloc(sdev, pdu);
458 	if (!priv)
459 		return;
460 
461 	/* setup a urb */
462 	if (usb_pipeisoc(pipe))
463 		priv->urb = usb_alloc_urb(pdu->u.cmd_submit.number_of_packets,
464 					  GFP_KERNEL);
465 	else
466 		priv->urb = usb_alloc_urb(0, GFP_KERNEL);
467 
468 	if (!priv->urb) {
469 		dev_err(&sdev->interface->dev, "malloc urb\n");
470 		usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
471 		return;
472 	}
473 
474 	/* allocate urb transfer buffer, if needed */
475 	if (pdu->u.cmd_submit.transfer_buffer_length > 0) {
476 		priv->urb->transfer_buffer =
477 			kzalloc(pdu->u.cmd_submit.transfer_buffer_length,
478 				GFP_KERNEL);
479 		if (!priv->urb->transfer_buffer) {
480 			usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
481 			return;
482 		}
483 	}
484 
485 	/* copy urb setup packet */
486 	priv->urb->setup_packet = kmemdup(&pdu->u.cmd_submit.setup, 8,
487 					  GFP_KERNEL);
488 	if (!priv->urb->setup_packet) {
489 		dev_err(&sdev->interface->dev, "allocate setup_packet\n");
490 		usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
491 		return;
492 	}
493 
494 	/* set other members from the base header of pdu */
495 	priv->urb->context                = (void *) priv;
496 	priv->urb->dev                    = udev;
497 	priv->urb->pipe                   = pipe;
498 	priv->urb->complete               = stub_complete;
499 
500 	usbip_pack_pdu(pdu, priv->urb, USBIP_CMD_SUBMIT, 0);
501 
502 
503 	if (usbip_recv_xbuff(ud, priv->urb) < 0)
504 		return;
505 
506 	if (usbip_recv_iso(ud, priv->urb) < 0)
507 		return;
508 
509 	/* no need to submit an intercepted request, but harmless? */
510 	tweak_special_requests(priv->urb);
511 
512 	masking_bogus_flags(priv->urb);
513 	/* urb is now ready to submit */
514 	ret = usb_submit_urb(priv->urb, GFP_KERNEL);
515 
516 	if (ret == 0)
517 		usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
518 				  pdu->base.seqnum);
519 	else {
520 		dev_err(&sdev->interface->dev, "submit_urb error, %d\n", ret);
521 		usbip_dump_header(pdu);
522 		usbip_dump_urb(priv->urb);
523 
524 		/*
525 		 * Pessimistic.
526 		 * This connection will be discarded.
527 		 */
528 		usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
529 	}
530 
531 	usbip_dbg_stub_rx("Leave\n");
532 }
533 
534 /* recv a pdu */
535 static void stub_rx_pdu(struct usbip_device *ud)
536 {
537 	int ret;
538 	struct usbip_header pdu;
539 	struct stub_device *sdev = container_of(ud, struct stub_device, ud);
540 	struct device *dev = &sdev->udev->dev;
541 
542 	usbip_dbg_stub_rx("Enter\n");
543 
544 	memset(&pdu, 0, sizeof(pdu));
545 
546 	/* receive a pdu header */
547 	ret = usbip_recv(ud->tcp_socket, &pdu, sizeof(pdu));
548 	if (ret != sizeof(pdu)) {
549 		dev_err(dev, "recv a header, %d\n", ret);
550 		usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
551 		return;
552 	}
553 
554 	usbip_header_correct_endian(&pdu, 0);
555 
556 	if (usbip_dbg_flag_stub_rx)
557 		usbip_dump_header(&pdu);
558 
559 	if (!valid_request(sdev, &pdu)) {
560 		dev_err(dev, "recv invalid request\n");
561 		usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
562 		return;
563 	}
564 
565 	switch (pdu.base.command) {
566 	case USBIP_CMD_UNLINK:
567 		stub_recv_cmd_unlink(sdev, &pdu);
568 		break;
569 
570 	case USBIP_CMD_SUBMIT:
571 		stub_recv_cmd_submit(sdev, &pdu);
572 		break;
573 
574 	default:
575 		/* NOTREACHED */
576 		dev_err(dev, "unknown pdu\n");
577 		usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
578 		break;
579 	}
580 }
581 
582 int stub_rx_loop(void *data)
583 {
584 	struct usbip_device *ud = data;
585 
586 	while (!kthread_should_stop()) {
587 		if (usbip_event_happened(ud))
588 			break;
589 
590 		stub_rx_pdu(ud);
591 	}
592 
593 	return 0;
594 }
595