xref: /linux/drivers/usb/storage/uas.c (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * USB Attached SCSI
4  * Note that this is not the same as the USB Mass Storage driver
5  *
6  * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016
7  * Copyright Matthew Wilcox for Intel Corp, 2010
8  * Copyright Sarah Sharp for Intel Corp, 2010
9  */
10 
11 #include <linux/blkdev.h>
12 #include <linux/slab.h>
13 #include <linux/types.h>
14 #include <linux/module.h>
15 #include <linux/usb.h>
16 #include <linux/usb_usual.h>
17 #include <linux/usb/hcd.h>
18 #include <linux/usb/storage.h>
19 #include <linux/usb/uas.h>
20 
21 #include <scsi/scsi.h>
22 #include <scsi/scsi_eh.h>
23 #include <scsi/scsi_dbg.h>
24 #include <scsi/scsi_devinfo.h>
25 #include <scsi/scsi_cmnd.h>
26 #include <scsi/scsi_device.h>
27 #include <scsi/scsi_host.h>
28 #include <scsi/scsi_tcq.h>
29 
30 #include "uas-detect.h"
31 #include "scsiglue.h"
32 
33 #define MAX_CMNDS 256
34 
35 struct uas_dev_info {
36 	struct usb_interface *intf;
37 	struct usb_device *udev;
38 	struct usb_anchor cmd_urbs;
39 	struct usb_anchor sense_urbs;
40 	struct usb_anchor data_urbs;
41 	u64 flags;
42 	int qdepth, resetting;
43 	unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
44 	unsigned use_streams:1;
45 	unsigned shutdown:1;
46 	struct scsi_cmnd *cmnd[MAX_CMNDS];
47 	spinlock_t lock;
48 	struct work_struct work;
49 	struct work_struct scan_work;      /* for async scanning */
50 };
51 
52 enum {
53 	SUBMIT_STATUS_URB	= BIT(1),
54 	ALLOC_DATA_IN_URB	= BIT(2),
55 	SUBMIT_DATA_IN_URB	= BIT(3),
56 	ALLOC_DATA_OUT_URB	= BIT(4),
57 	SUBMIT_DATA_OUT_URB	= BIT(5),
58 	ALLOC_CMD_URB		= BIT(6),
59 	SUBMIT_CMD_URB		= BIT(7),
60 	COMMAND_INFLIGHT        = BIT(8),
61 	DATA_IN_URB_INFLIGHT    = BIT(9),
62 	DATA_OUT_URB_INFLIGHT   = BIT(10),
63 	COMMAND_ABORTED         = BIT(11),
64 	IS_IN_WORK_LIST         = BIT(12),
65 };
66 
67 /* Overrides scsi_pointer */
68 struct uas_cmd_info {
69 	unsigned int state;
70 	unsigned int uas_tag;
71 	struct urb *cmd_urb;
72 	struct urb *data_in_urb;
73 	struct urb *data_out_urb;
74 };
75 
76 /* I hate forward declarations, but I actually have a loop */
77 static int uas_submit_urbs(struct scsi_cmnd *cmnd,
78 				struct uas_dev_info *devinfo);
79 static void uas_do_work(struct work_struct *work);
80 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller);
81 static void uas_free_streams(struct uas_dev_info *devinfo);
82 static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
83 				int status);
84 
85 /*
86  * This driver needs its own workqueue, as we need to control memory allocation.
87  *
88  * In the course of error handling and power management uas_wait_for_pending_cmnds()
89  * needs to flush pending work items. In these contexts we cannot allocate memory
90  * by doing block IO as we would deadlock. For the same reason we cannot wait
91  * for anything allocating memory not heeding these constraints.
92  *
93  * So we have to control all work items that can be on the workqueue we flush.
94  * Hence we cannot share a queue and need our own.
95  */
96 static struct workqueue_struct *workqueue;
97 
98 static void uas_do_work(struct work_struct *work)
99 {
100 	struct uas_dev_info *devinfo =
101 		container_of(work, struct uas_dev_info, work);
102 	struct uas_cmd_info *cmdinfo;
103 	struct scsi_cmnd *cmnd;
104 	unsigned long flags;
105 	int i, err;
106 
107 	spin_lock_irqsave(&devinfo->lock, flags);
108 
109 	if (devinfo->resetting)
110 		goto out;
111 
112 	for (i = 0; i < devinfo->qdepth; i++) {
113 		if (!devinfo->cmnd[i])
114 			continue;
115 
116 		cmnd = devinfo->cmnd[i];
117 		cmdinfo = scsi_cmd_priv(cmnd);
118 
119 		if (!(cmdinfo->state & IS_IN_WORK_LIST))
120 			continue;
121 
122 		err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
123 		if (!err)
124 			cmdinfo->state &= ~IS_IN_WORK_LIST;
125 		else
126 			queue_work(workqueue, &devinfo->work);
127 	}
128 out:
129 	spin_unlock_irqrestore(&devinfo->lock, flags);
130 }
131 
132 static void uas_scan_work(struct work_struct *work)
133 {
134 	struct uas_dev_info *devinfo =
135 		container_of(work, struct uas_dev_info, scan_work);
136 	struct Scsi_Host *shost = usb_get_intfdata(devinfo->intf);
137 
138 	dev_dbg(&devinfo->intf->dev, "starting scan\n");
139 	scsi_scan_host(shost);
140 	dev_dbg(&devinfo->intf->dev, "scan complete\n");
141 }
142 
143 static void uas_add_work(struct scsi_cmnd *cmnd)
144 {
145 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
146 	struct uas_dev_info *devinfo = cmnd->device->hostdata;
147 
148 	lockdep_assert_held(&devinfo->lock);
149 	cmdinfo->state |= IS_IN_WORK_LIST;
150 	queue_work(workqueue, &devinfo->work);
151 }
152 
153 static void uas_zap_pending(struct uas_dev_info *devinfo, int result)
154 {
155 	struct uas_cmd_info *cmdinfo;
156 	struct scsi_cmnd *cmnd;
157 	unsigned long flags;
158 	int i, err;
159 
160 	spin_lock_irqsave(&devinfo->lock, flags);
161 	for (i = 0; i < devinfo->qdepth; i++) {
162 		if (!devinfo->cmnd[i])
163 			continue;
164 
165 		cmnd = devinfo->cmnd[i];
166 		cmdinfo = scsi_cmd_priv(cmnd);
167 		uas_log_cmd_state(cmnd, __func__, 0);
168 		/* Sense urbs were killed, clear COMMAND_INFLIGHT manually */
169 		cmdinfo->state &= ~COMMAND_INFLIGHT;
170 		cmnd->result = result << 16;
171 		err = uas_try_complete(cmnd, __func__);
172 		WARN_ON(err != 0);
173 	}
174 	spin_unlock_irqrestore(&devinfo->lock, flags);
175 }
176 
177 static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
178 {
179 	struct sense_iu *sense_iu = urb->transfer_buffer;
180 	struct scsi_device *sdev = cmnd->device;
181 
182 	if (urb->actual_length > 16) {
183 		unsigned len = be16_to_cpup(&sense_iu->len);
184 		if (len + 16 != urb->actual_length) {
185 			int newlen = min(len + 16, urb->actual_length) - 16;
186 			if (newlen < 0)
187 				newlen = 0;
188 			sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
189 				"disagrees with IU sense data length %d, "
190 				"using %d bytes of sense data\n", __func__,
191 					urb->actual_length, len, newlen);
192 			len = newlen;
193 		}
194 		memcpy(cmnd->sense_buffer, sense_iu->sense, len);
195 	}
196 
197 	cmnd->result = sense_iu->status;
198 }
199 
200 static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
201 			      int status)
202 {
203 	struct uas_cmd_info *ci = scsi_cmd_priv(cmnd);
204 
205 	if (status == -ENODEV) /* too late */
206 		return;
207 
208 	scmd_printk(KERN_INFO, cmnd,
209 		    "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ",
210 		    prefix, status, ci->uas_tag,
211 		    (ci->state & SUBMIT_STATUS_URB)     ? " s-st"  : "",
212 		    (ci->state & ALLOC_DATA_IN_URB)     ? " a-in"  : "",
213 		    (ci->state & SUBMIT_DATA_IN_URB)    ? " s-in"  : "",
214 		    (ci->state & ALLOC_DATA_OUT_URB)    ? " a-out" : "",
215 		    (ci->state & SUBMIT_DATA_OUT_URB)   ? " s-out" : "",
216 		    (ci->state & ALLOC_CMD_URB)         ? " a-cmd" : "",
217 		    (ci->state & SUBMIT_CMD_URB)        ? " s-cmd" : "",
218 		    (ci->state & COMMAND_INFLIGHT)      ? " CMD"   : "",
219 		    (ci->state & DATA_IN_URB_INFLIGHT)  ? " IN"    : "",
220 		    (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT"   : "",
221 		    (ci->state & COMMAND_ABORTED)       ? " abort" : "",
222 		    (ci->state & IS_IN_WORK_LIST)       ? " work"  : "");
223 	scsi_print_command(cmnd);
224 }
225 
226 static void uas_free_unsubmitted_urbs(struct scsi_cmnd *cmnd)
227 {
228 	struct uas_cmd_info *cmdinfo;
229 
230 	if (!cmnd)
231 		return;
232 
233 	cmdinfo = scsi_cmd_priv(cmnd);
234 
235 	if (cmdinfo->state & SUBMIT_CMD_URB)
236 		usb_free_urb(cmdinfo->cmd_urb);
237 
238 	/* data urbs may have never gotten their submit flag set */
239 	if (!(cmdinfo->state & DATA_IN_URB_INFLIGHT))
240 		usb_free_urb(cmdinfo->data_in_urb);
241 	if (!(cmdinfo->state & DATA_OUT_URB_INFLIGHT))
242 		usb_free_urb(cmdinfo->data_out_urb);
243 }
244 
245 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller)
246 {
247 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
248 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
249 
250 	lockdep_assert_held(&devinfo->lock);
251 	if (cmdinfo->state & (COMMAND_INFLIGHT |
252 			      DATA_IN_URB_INFLIGHT |
253 			      DATA_OUT_URB_INFLIGHT |
254 			      COMMAND_ABORTED))
255 		return -EBUSY;
256 	devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
257 	uas_free_unsubmitted_urbs(cmnd);
258 	scsi_done(cmnd);
259 	return 0;
260 }
261 
262 static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
263 			  unsigned direction)
264 {
265 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
266 	int err;
267 
268 	cmdinfo->state |= direction | SUBMIT_STATUS_URB;
269 	err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
270 	if (err) {
271 		uas_add_work(cmnd);
272 	}
273 }
274 
275 static bool uas_evaluate_response_iu(struct response_iu *riu, struct scsi_cmnd *cmnd)
276 {
277 	u8 response_code = riu->response_code;
278 
279 	switch (response_code) {
280 	case RC_INCORRECT_LUN:
281 		set_host_byte(cmnd, DID_BAD_TARGET);
282 		break;
283 	case RC_TMF_SUCCEEDED:
284 		set_host_byte(cmnd, DID_OK);
285 		break;
286 	case RC_TMF_NOT_SUPPORTED:
287 		set_host_byte(cmnd, DID_BAD_TARGET);
288 		break;
289 	default:
290 		uas_log_cmd_state(cmnd, "response iu", response_code);
291 		set_host_byte(cmnd, DID_ERROR);
292 		break;
293 	}
294 
295 	return response_code == RC_TMF_SUCCEEDED;
296 }
297 
298 static void uas_stat_cmplt(struct urb *urb)
299 {
300 	struct iu *iu = urb->transfer_buffer;
301 	struct Scsi_Host *shost = urb->context;
302 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
303 	struct urb *data_in_urb = NULL;
304 	struct urb *data_out_urb = NULL;
305 	struct scsi_cmnd *cmnd;
306 	struct uas_cmd_info *cmdinfo;
307 	unsigned long flags;
308 	unsigned int idx;
309 	int status = urb->status;
310 	bool success;
311 
312 	spin_lock_irqsave(&devinfo->lock, flags);
313 
314 	if (devinfo->resetting)
315 		goto out;
316 
317 	if (status) {
318 		if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
319 			dev_err(&urb->dev->dev, "stat urb: status %d\n", status);
320 		goto out;
321 	}
322 
323 	idx = be16_to_cpup(&iu->tag) - 1;
324 	if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) {
325 		dev_err(&urb->dev->dev,
326 			"stat urb: no pending cmd for uas-tag %d\n", idx + 1);
327 		goto out;
328 	}
329 
330 	cmnd = devinfo->cmnd[idx];
331 	cmdinfo = scsi_cmd_priv(cmnd);
332 
333 	if (!(cmdinfo->state & COMMAND_INFLIGHT)) {
334 		uas_log_cmd_state(cmnd, "unexpected status cmplt", 0);
335 		goto out;
336 	}
337 
338 	switch (iu->iu_id) {
339 	case IU_ID_STATUS:
340 		uas_sense(urb, cmnd);
341 		if (cmnd->result != 0) {
342 			/* cancel data transfers on error */
343 			data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
344 			data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
345 		}
346 		cmdinfo->state &= ~COMMAND_INFLIGHT;
347 		uas_try_complete(cmnd, __func__);
348 		break;
349 	case IU_ID_READ_READY:
350 		if (!cmdinfo->data_in_urb ||
351 				(cmdinfo->state & DATA_IN_URB_INFLIGHT)) {
352 			uas_log_cmd_state(cmnd, "unexpected read rdy", 0);
353 			break;
354 		}
355 		uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB);
356 		break;
357 	case IU_ID_WRITE_READY:
358 		if (!cmdinfo->data_out_urb ||
359 				(cmdinfo->state & DATA_OUT_URB_INFLIGHT)) {
360 			uas_log_cmd_state(cmnd, "unexpected write rdy", 0);
361 			break;
362 		}
363 		uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB);
364 		break;
365 	case IU_ID_RESPONSE:
366 		cmdinfo->state &= ~COMMAND_INFLIGHT;
367 		success = uas_evaluate_response_iu((struct response_iu *)iu, cmnd);
368 		if (!success) {
369 			/* Error, cancel data transfers */
370 			data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
371 			data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
372 		}
373 		uas_try_complete(cmnd, __func__);
374 		break;
375 	default:
376 		uas_log_cmd_state(cmnd, "bogus IU", iu->iu_id);
377 	}
378 out:
379 	usb_free_urb(urb);
380 	spin_unlock_irqrestore(&devinfo->lock, flags);
381 
382 	/* Unlinking of data urbs must be done without holding the lock */
383 	if (data_in_urb) {
384 		usb_unlink_urb(data_in_urb);
385 		usb_put_urb(data_in_urb);
386 	}
387 	if (data_out_urb) {
388 		usb_unlink_urb(data_out_urb);
389 		usb_put_urb(data_out_urb);
390 	}
391 }
392 
393 static void uas_data_cmplt(struct urb *urb)
394 {
395 	struct scsi_cmnd *cmnd = urb->context;
396 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
397 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
398 	struct scsi_data_buffer *sdb = &cmnd->sdb;
399 	unsigned long flags;
400 	int status = urb->status;
401 
402 	spin_lock_irqsave(&devinfo->lock, flags);
403 
404 	if (cmdinfo->data_in_urb == urb) {
405 		cmdinfo->state &= ~DATA_IN_URB_INFLIGHT;
406 		cmdinfo->data_in_urb = NULL;
407 	} else if (cmdinfo->data_out_urb == urb) {
408 		cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT;
409 		cmdinfo->data_out_urb = NULL;
410 	}
411 
412 	if (devinfo->resetting)
413 		goto out;
414 
415 	/* Data urbs should not complete before the cmd urb is submitted */
416 	if (cmdinfo->state & SUBMIT_CMD_URB) {
417 		uas_log_cmd_state(cmnd, "unexpected data cmplt", 0);
418 		goto out;
419 	}
420 
421 	if (status) {
422 		if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
423 			uas_log_cmd_state(cmnd, "data cmplt err", status);
424 		/* error: no data transfered */
425 		scsi_set_resid(cmnd, sdb->length);
426 		set_host_byte(cmnd, DID_ERROR);
427 	} else {
428 		scsi_set_resid(cmnd, sdb->length - urb->actual_length);
429 	}
430 	uas_try_complete(cmnd, __func__);
431 out:
432 	usb_free_urb(urb);
433 	spin_unlock_irqrestore(&devinfo->lock, flags);
434 }
435 
436 static void uas_cmd_cmplt(struct urb *urb)
437 {
438 	if (urb->status)
439 		dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status);
440 
441 	usb_free_urb(urb);
442 }
443 
444 static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
445 				      struct scsi_cmnd *cmnd,
446 				      enum dma_data_direction dir)
447 {
448 	struct usb_device *udev = devinfo->udev;
449 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
450 	struct urb *urb = usb_alloc_urb(0, gfp);
451 	struct scsi_data_buffer *sdb = &cmnd->sdb;
452 	unsigned int pipe = (dir == DMA_FROM_DEVICE)
453 		? devinfo->data_in_pipe : devinfo->data_out_pipe;
454 
455 	if (!urb)
456 		goto out;
457 	usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length,
458 			  uas_data_cmplt, cmnd);
459 	if (devinfo->use_streams)
460 		urb->stream_id = cmdinfo->uas_tag;
461 	urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
462 	urb->sg = sdb->table.sgl;
463  out:
464 	return urb;
465 }
466 
467 static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
468 				       struct scsi_cmnd *cmnd)
469 {
470 	struct usb_device *udev = devinfo->udev;
471 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
472 	struct urb *urb = usb_alloc_urb(0, gfp);
473 	struct sense_iu *iu;
474 
475 	if (!urb)
476 		goto out;
477 
478 	iu = kzalloc(sizeof(*iu), gfp);
479 	if (!iu)
480 		goto free;
481 
482 	usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
483 			  uas_stat_cmplt, cmnd->device->host);
484 	if (devinfo->use_streams)
485 		urb->stream_id = cmdinfo->uas_tag;
486 	urb->transfer_flags |= URB_FREE_BUFFER;
487  out:
488 	return urb;
489  free:
490 	usb_free_urb(urb);
491 	return NULL;
492 }
493 
494 static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
495 					struct scsi_cmnd *cmnd)
496 {
497 	struct usb_device *udev = devinfo->udev;
498 	struct scsi_device *sdev = cmnd->device;
499 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
500 	struct urb *urb = usb_alloc_urb(0, gfp);
501 	struct command_iu *iu;
502 	int len;
503 
504 	if (!urb)
505 		goto out;
506 
507 	len = cmnd->cmd_len - 16;
508 	if (len < 0)
509 		len = 0;
510 	len = ALIGN(len, 4);
511 	iu = kzalloc(sizeof(*iu) + len, gfp);
512 	if (!iu)
513 		goto free;
514 
515 	iu->iu_id = IU_ID_COMMAND;
516 	iu->tag = cpu_to_be16(cmdinfo->uas_tag);
517 	iu->prio_attr = UAS_SIMPLE_TAG;
518 	iu->len = len;
519 	int_to_scsilun(sdev->lun, &iu->lun);
520 	memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
521 
522 	usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len,
523 							uas_cmd_cmplt, NULL);
524 	urb->transfer_flags |= URB_FREE_BUFFER;
525  out:
526 	return urb;
527  free:
528 	usb_free_urb(urb);
529 	return NULL;
530 }
531 
532 /*
533  * Why should I request the Status IU before sending the Command IU?  Spec
534  * says to, but also says the device may receive them in any order.  Seems
535  * daft to me.
536  */
537 
538 static int uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp)
539 {
540 	struct uas_dev_info *devinfo = cmnd->device->hostdata;
541 	struct urb *urb;
542 	int err;
543 
544 	urb = uas_alloc_sense_urb(devinfo, gfp, cmnd);
545 	if (!urb)
546 		return -ENOMEM;
547 	usb_anchor_urb(urb, &devinfo->sense_urbs);
548 	err = usb_submit_urb(urb, gfp);
549 	if (err) {
550 		usb_unanchor_urb(urb);
551 		uas_log_cmd_state(cmnd, "sense submit err", err);
552 		usb_free_urb(urb);
553 	}
554 	return err;
555 }
556 
557 static int uas_submit_urbs(struct scsi_cmnd *cmnd,
558 			   struct uas_dev_info *devinfo)
559 {
560 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
561 	int err;
562 
563 	lockdep_assert_held(&devinfo->lock);
564 	if (cmdinfo->state & SUBMIT_STATUS_URB) {
565 		err = uas_submit_sense_urb(cmnd, GFP_ATOMIC);
566 		if (err)
567 			return err;
568 		cmdinfo->state &= ~SUBMIT_STATUS_URB;
569 	}
570 
571 	if (cmdinfo->state & ALLOC_DATA_IN_URB) {
572 		cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
573 							cmnd, DMA_FROM_DEVICE);
574 		if (!cmdinfo->data_in_urb)
575 			return -ENOMEM;
576 		cmdinfo->state &= ~ALLOC_DATA_IN_URB;
577 	}
578 
579 	if (cmdinfo->state & SUBMIT_DATA_IN_URB) {
580 		usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs);
581 		err = usb_submit_urb(cmdinfo->data_in_urb, GFP_ATOMIC);
582 		if (err) {
583 			usb_unanchor_urb(cmdinfo->data_in_urb);
584 			uas_log_cmd_state(cmnd, "data in submit err", err);
585 			return err;
586 		}
587 		cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
588 		cmdinfo->state |= DATA_IN_URB_INFLIGHT;
589 	}
590 
591 	if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
592 		cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
593 							cmnd, DMA_TO_DEVICE);
594 		if (!cmdinfo->data_out_urb)
595 			return -ENOMEM;
596 		cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
597 	}
598 
599 	if (cmdinfo->state & SUBMIT_DATA_OUT_URB) {
600 		usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs);
601 		err = usb_submit_urb(cmdinfo->data_out_urb, GFP_ATOMIC);
602 		if (err) {
603 			usb_unanchor_urb(cmdinfo->data_out_urb);
604 			uas_log_cmd_state(cmnd, "data out submit err", err);
605 			return err;
606 		}
607 		cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
608 		cmdinfo->state |= DATA_OUT_URB_INFLIGHT;
609 	}
610 
611 	if (cmdinfo->state & ALLOC_CMD_URB) {
612 		cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd);
613 		if (!cmdinfo->cmd_urb)
614 			return -ENOMEM;
615 		cmdinfo->state &= ~ALLOC_CMD_URB;
616 	}
617 
618 	if (cmdinfo->state & SUBMIT_CMD_URB) {
619 		usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs);
620 		err = usb_submit_urb(cmdinfo->cmd_urb, GFP_ATOMIC);
621 		if (err) {
622 			usb_unanchor_urb(cmdinfo->cmd_urb);
623 			uas_log_cmd_state(cmnd, "cmd submit err", err);
624 			return err;
625 		}
626 		cmdinfo->cmd_urb = NULL;
627 		cmdinfo->state &= ~SUBMIT_CMD_URB;
628 		cmdinfo->state |= COMMAND_INFLIGHT;
629 	}
630 
631 	return 0;
632 }
633 
634 static int uas_queuecommand_lck(struct scsi_cmnd *cmnd)
635 {
636 	struct scsi_device *sdev = cmnd->device;
637 	struct uas_dev_info *devinfo = sdev->hostdata;
638 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
639 	unsigned long flags;
640 	int idx, err;
641 
642 	/* Re-check scsi_block_requests now that we've the host-lock */
643 	if (cmnd->device->host->host_self_blocked)
644 		return SCSI_MLQUEUE_DEVICE_BUSY;
645 
646 	if ((devinfo->flags & US_FL_NO_ATA_1X) &&
647 			(cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) {
648 		memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB,
649 		       sizeof(usb_stor_sense_invalidCDB));
650 		cmnd->result = SAM_STAT_CHECK_CONDITION;
651 		scsi_done(cmnd);
652 		return 0;
653 	}
654 
655 	spin_lock_irqsave(&devinfo->lock, flags);
656 
657 	if (devinfo->resetting) {
658 		set_host_byte(cmnd, DID_ERROR);
659 		scsi_done(cmnd);
660 		goto zombie;
661 	}
662 
663 	/* Find a free uas-tag */
664 	for (idx = 0; idx < devinfo->qdepth; idx++) {
665 		if (!devinfo->cmnd[idx])
666 			break;
667 	}
668 	if (idx == devinfo->qdepth) {
669 		spin_unlock_irqrestore(&devinfo->lock, flags);
670 		return SCSI_MLQUEUE_DEVICE_BUSY;
671 	}
672 
673 	memset(cmdinfo, 0, sizeof(*cmdinfo));
674 	cmdinfo->uas_tag = idx + 1; /* uas-tag == usb-stream-id, so 1 based */
675 	cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB;
676 
677 	switch (cmnd->sc_data_direction) {
678 	case DMA_FROM_DEVICE:
679 		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
680 		break;
681 	case DMA_BIDIRECTIONAL:
682 		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
683 		fallthrough;
684 	case DMA_TO_DEVICE:
685 		cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB;
686 		break;
687 	case DMA_NONE:
688 		break;
689 	}
690 
691 	if (!devinfo->use_streams)
692 		cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
693 
694 	err = uas_submit_urbs(cmnd, devinfo);
695 	/*
696 	 * in case of fatal errors the SCSI layer is peculiar
697 	 * a command that has finished is a success for the purpose
698 	 * of queueing, no matter how fatal the error
699 	 */
700 	if (err == -ENODEV) {
701 		set_host_byte(cmnd, DID_NO_CONNECT);
702 		scsi_done(cmnd);
703 		goto zombie;
704 	}
705 	if (err) {
706 		/* If we did nothing, give up now */
707 		if (cmdinfo->state & SUBMIT_STATUS_URB) {
708 			spin_unlock_irqrestore(&devinfo->lock, flags);
709 			return SCSI_MLQUEUE_DEVICE_BUSY;
710 		}
711 		uas_add_work(cmnd);
712 	}
713 
714 	devinfo->cmnd[idx] = cmnd;
715 zombie:
716 	spin_unlock_irqrestore(&devinfo->lock, flags);
717 	return 0;
718 }
719 
720 static DEF_SCSI_QCMD(uas_queuecommand)
721 
722 /*
723  * For now we do not support actually sending an abort to the device, so
724  * this eh always fails. Still we must define it to make sure that we've
725  * dropped all references to the cmnd in question once this function exits.
726  */
727 static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
728 {
729 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
730 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
731 	struct urb *data_in_urb = NULL;
732 	struct urb *data_out_urb = NULL;
733 	unsigned long flags;
734 
735 	spin_lock_irqsave(&devinfo->lock, flags);
736 
737 	uas_log_cmd_state(cmnd, __func__, 0);
738 
739 	/* Ensure that try_complete does not call scsi_done */
740 	cmdinfo->state |= COMMAND_ABORTED;
741 
742 	/* Drop all refs to this cmnd, kill data urbs to break their ref */
743 	devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
744 	if (cmdinfo->state & DATA_IN_URB_INFLIGHT)
745 		data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
746 	if (cmdinfo->state & DATA_OUT_URB_INFLIGHT)
747 		data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
748 
749 	uas_free_unsubmitted_urbs(cmnd);
750 
751 	spin_unlock_irqrestore(&devinfo->lock, flags);
752 
753 	if (data_in_urb) {
754 		usb_kill_urb(data_in_urb);
755 		usb_put_urb(data_in_urb);
756 	}
757 	if (data_out_urb) {
758 		usb_kill_urb(data_out_urb);
759 		usb_put_urb(data_out_urb);
760 	}
761 
762 	return FAILED;
763 }
764 
765 static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd)
766 {
767 	struct scsi_device *sdev = cmnd->device;
768 	struct uas_dev_info *devinfo = sdev->hostdata;
769 	struct usb_device *udev = devinfo->udev;
770 	unsigned long flags;
771 	int err;
772 
773 	err = usb_lock_device_for_reset(udev, devinfo->intf);
774 	if (err) {
775 		shost_printk(KERN_ERR, sdev->host,
776 			     "%s FAILED to get lock err %d\n", __func__, err);
777 		return FAILED;
778 	}
779 
780 	shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__);
781 
782 	spin_lock_irqsave(&devinfo->lock, flags);
783 	devinfo->resetting = 1;
784 	spin_unlock_irqrestore(&devinfo->lock, flags);
785 
786 	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
787 	usb_kill_anchored_urbs(&devinfo->sense_urbs);
788 	usb_kill_anchored_urbs(&devinfo->data_urbs);
789 	uas_zap_pending(devinfo, DID_RESET);
790 
791 	err = usb_reset_device(udev);
792 
793 	spin_lock_irqsave(&devinfo->lock, flags);
794 	devinfo->resetting = 0;
795 	spin_unlock_irqrestore(&devinfo->lock, flags);
796 
797 	usb_unlock_device(udev);
798 
799 	if (err) {
800 		shost_printk(KERN_INFO, sdev->host, "%s FAILED err %d\n",
801 			     __func__, err);
802 		return FAILED;
803 	}
804 
805 	shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__);
806 	return SUCCESS;
807 }
808 
809 static int uas_target_alloc(struct scsi_target *starget)
810 {
811 	struct uas_dev_info *devinfo = (struct uas_dev_info *)
812 			dev_to_shost(starget->dev.parent)->hostdata;
813 
814 	if (devinfo->flags & US_FL_NO_REPORT_LUNS)
815 		starget->no_report_luns = 1;
816 
817 	return 0;
818 }
819 
820 static int uas_slave_alloc(struct scsi_device *sdev)
821 {
822 	struct uas_dev_info *devinfo =
823 		(struct uas_dev_info *)sdev->host->hostdata;
824 
825 	/*
826 	 * Some USB storage devices reset if the IO advice hints grouping mode
827 	 * page is queried. Hence skip that mode page.
828 	 */
829 	sdev->sdev_bflags |= BLIST_SKIP_IO_HINTS;
830 
831 	sdev->hostdata = devinfo;
832 	return 0;
833 }
834 
835 static int uas_device_configure(struct scsi_device *sdev,
836 		struct queue_limits *lim)
837 {
838 	struct uas_dev_info *devinfo = sdev->hostdata;
839 
840 	if (devinfo->flags & US_FL_MAX_SECTORS_64)
841 		lim->max_hw_sectors = 64;
842 	else if (devinfo->flags & US_FL_MAX_SECTORS_240)
843 		lim->max_hw_sectors = 240;
844 
845 	if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
846 		sdev->no_report_opcodes = 1;
847 
848 	/* A few buggy USB-ATA bridges don't understand FUA */
849 	if (devinfo->flags & US_FL_BROKEN_FUA)
850 		sdev->broken_fua = 1;
851 
852 	/* UAS also needs to support FL_ALWAYS_SYNC */
853 	if (devinfo->flags & US_FL_ALWAYS_SYNC) {
854 		sdev->skip_ms_page_3f = 1;
855 		sdev->skip_ms_page_8 = 1;
856 		sdev->wce_default_on = 1;
857 	}
858 
859 	/* Some disks cannot handle READ_CAPACITY_16 */
860 	if (devinfo->flags & US_FL_NO_READ_CAPACITY_16)
861 		sdev->no_read_capacity_16 = 1;
862 
863 	/* Some disks cannot handle WRITE_SAME */
864 	if (devinfo->flags & US_FL_NO_SAME)
865 		sdev->no_write_same = 1;
866 	/*
867 	 * Some disks return the total number of blocks in response
868 	 * to READ CAPACITY rather than the highest block number.
869 	 * If this device makes that mistake, tell the sd driver.
870 	 */
871 	if (devinfo->flags & US_FL_FIX_CAPACITY)
872 		sdev->fix_capacity = 1;
873 
874 	/*
875 	 * in some cases we have to guess
876 	 */
877 	if (devinfo->flags & US_FL_CAPACITY_HEURISTICS)
878 		sdev->guess_capacity = 1;
879 
880 	/*
881 	 * Some devices report generic values until the media has been
882 	 * accessed. Force a READ(10) prior to querying device
883 	 * characteristics.
884 	 */
885 	sdev->read_before_ms = 1;
886 
887 	/*
888 	 * Some devices don't like MODE SENSE with page=0x3f,
889 	 * which is the command used for checking if a device
890 	 * is write-protected.  Now that we tell the sd driver
891 	 * to do a 192-byte transfer with this command the
892 	 * majority of devices work fine, but a few still can't
893 	 * handle it.  The sd driver will simply assume those
894 	 * devices are write-enabled.
895 	 */
896 	if (devinfo->flags & US_FL_NO_WP_DETECT)
897 		sdev->skip_ms_page_3f = 1;
898 
899 	scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
900 	return 0;
901 }
902 
903 static const struct scsi_host_template uas_host_template = {
904 	.module = THIS_MODULE,
905 	.name = "uas",
906 	.queuecommand = uas_queuecommand,
907 	.target_alloc = uas_target_alloc,
908 	.slave_alloc = uas_slave_alloc,
909 	.device_configure = uas_device_configure,
910 	.eh_abort_handler = uas_eh_abort_handler,
911 	.eh_device_reset_handler = uas_eh_device_reset_handler,
912 	.this_id = -1,
913 	.skip_settle_delay = 1,
914 	/*
915 	 * The protocol has no requirements on alignment in the strict sense.
916 	 * Controllers may or may not have alignment restrictions.
917 	 * As this is not exported, we use an extremely conservative guess.
918 	 */
919 	.dma_alignment = 511,
920 	.dma_boundary = PAGE_SIZE - 1,
921 	.cmd_size = sizeof(struct uas_cmd_info),
922 };
923 
924 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
925 		    vendorName, productName, useProtocol, useTransport, \
926 		    initFunction, flags) \
927 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
928 	.driver_info = (flags) }
929 
930 static const struct usb_device_id uas_usb_ids[] = {
931 #	include "unusual_uas.h"
932 	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
933 	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
934 	{ }
935 };
936 MODULE_DEVICE_TABLE(usb, uas_usb_ids);
937 
938 #undef UNUSUAL_DEV
939 
940 static int uas_switch_interface(struct usb_device *udev,
941 				struct usb_interface *intf)
942 {
943 	struct usb_host_interface *alt;
944 
945 	alt = uas_find_uas_alt_setting(intf);
946 	if (!alt)
947 		return -ENODEV;
948 
949 	return usb_set_interface(udev, alt->desc.bInterfaceNumber,
950 			alt->desc.bAlternateSetting);
951 }
952 
953 static int uas_configure_endpoints(struct uas_dev_info *devinfo)
954 {
955 	struct usb_host_endpoint *eps[4] = { };
956 	struct usb_device *udev = devinfo->udev;
957 	int r;
958 
959 	r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps);
960 	if (r)
961 		return r;
962 
963 	devinfo->cmd_pipe = usb_sndbulkpipe(udev,
964 					    usb_endpoint_num(&eps[0]->desc));
965 	devinfo->status_pipe = usb_rcvbulkpipe(udev,
966 					    usb_endpoint_num(&eps[1]->desc));
967 	devinfo->data_in_pipe = usb_rcvbulkpipe(udev,
968 					    usb_endpoint_num(&eps[2]->desc));
969 	devinfo->data_out_pipe = usb_sndbulkpipe(udev,
970 					    usb_endpoint_num(&eps[3]->desc));
971 
972 	if (udev->speed < USB_SPEED_SUPER) {
973 		devinfo->qdepth = 32;
974 		devinfo->use_streams = 0;
975 	} else {
976 		devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1,
977 						    3, MAX_CMNDS, GFP_NOIO);
978 		if (devinfo->qdepth < 0)
979 			return devinfo->qdepth;
980 		devinfo->use_streams = 1;
981 	}
982 
983 	return 0;
984 }
985 
986 static void uas_free_streams(struct uas_dev_info *devinfo)
987 {
988 	struct usb_device *udev = devinfo->udev;
989 	struct usb_host_endpoint *eps[3];
990 
991 	eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
992 	eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
993 	eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
994 	usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO);
995 }
996 
997 static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
998 {
999 	int result = -ENOMEM;
1000 	struct Scsi_Host *shost = NULL;
1001 	struct uas_dev_info *devinfo;
1002 	struct usb_device *udev = interface_to_usbdev(intf);
1003 	u64 dev_flags;
1004 
1005 	if (!uas_use_uas_driver(intf, id, &dev_flags))
1006 		return -ENODEV;
1007 
1008 	if (uas_switch_interface(udev, intf))
1009 		return -ENODEV;
1010 
1011 	shost = scsi_host_alloc(&uas_host_template,
1012 				sizeof(struct uas_dev_info));
1013 	if (!shost)
1014 		goto set_alt0;
1015 
1016 	shost->max_cmd_len = 16 + 252;
1017 	shost->max_id = 1;
1018 	shost->max_lun = 256;
1019 	shost->max_channel = 0;
1020 	shost->sg_tablesize = udev->bus->sg_tablesize;
1021 
1022 	devinfo = (struct uas_dev_info *)shost->hostdata;
1023 	devinfo->intf = intf;
1024 	devinfo->udev = udev;
1025 	devinfo->resetting = 0;
1026 	devinfo->shutdown = 0;
1027 	devinfo->flags = dev_flags;
1028 	init_usb_anchor(&devinfo->cmd_urbs);
1029 	init_usb_anchor(&devinfo->sense_urbs);
1030 	init_usb_anchor(&devinfo->data_urbs);
1031 	spin_lock_init(&devinfo->lock);
1032 	INIT_WORK(&devinfo->work, uas_do_work);
1033 	INIT_WORK(&devinfo->scan_work, uas_scan_work);
1034 
1035 	result = uas_configure_endpoints(devinfo);
1036 	if (result)
1037 		goto set_alt0;
1038 
1039 	/*
1040 	 * 1 tag is reserved for untagged commands +
1041 	 * 1 tag to avoid off by one errors in some bridge firmwares
1042 	 */
1043 	shost->can_queue = devinfo->qdepth - 2;
1044 
1045 	usb_set_intfdata(intf, shost);
1046 	result = scsi_add_host(shost, &intf->dev);
1047 	if (result)
1048 		goto free_streams;
1049 
1050 	/* Submit the delayed_work for SCSI-device scanning */
1051 	schedule_work(&devinfo->scan_work);
1052 
1053 	return result;
1054 
1055 free_streams:
1056 	uas_free_streams(devinfo);
1057 	usb_set_intfdata(intf, NULL);
1058 set_alt0:
1059 	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
1060 	if (shost)
1061 		scsi_host_put(shost);
1062 	return result;
1063 }
1064 
1065 static int uas_cmnd_list_empty(struct uas_dev_info *devinfo)
1066 {
1067 	unsigned long flags;
1068 	int i, r = 1;
1069 
1070 	spin_lock_irqsave(&devinfo->lock, flags);
1071 
1072 	for (i = 0; i < devinfo->qdepth; i++) {
1073 		if (devinfo->cmnd[i]) {
1074 			r = 0; /* Not empty */
1075 			break;
1076 		}
1077 	}
1078 
1079 	spin_unlock_irqrestore(&devinfo->lock, flags);
1080 
1081 	return r;
1082 }
1083 
1084 /*
1085  * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily
1086  * get empty while there still is more work to do due to sense-urbs completing
1087  * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty.
1088  */
1089 static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo)
1090 {
1091 	unsigned long start_time;
1092 	int r;
1093 
1094 	start_time = jiffies;
1095 	do {
1096 		flush_work(&devinfo->work);
1097 
1098 		r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000);
1099 		if (r == 0)
1100 			return -ETIME;
1101 
1102 		r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500);
1103 		if (r == 0)
1104 			return -ETIME;
1105 
1106 		if (time_after(jiffies, start_time + 5 * HZ))
1107 			return -ETIME;
1108 	} while (!uas_cmnd_list_empty(devinfo));
1109 
1110 	return 0;
1111 }
1112 
1113 static int uas_pre_reset(struct usb_interface *intf)
1114 {
1115 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1116 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1117 	unsigned long flags;
1118 
1119 	if (devinfo->shutdown)
1120 		return 0;
1121 
1122 	/* Block new requests */
1123 	spin_lock_irqsave(shost->host_lock, flags);
1124 	scsi_block_requests(shost);
1125 	spin_unlock_irqrestore(shost->host_lock, flags);
1126 
1127 	if (uas_wait_for_pending_cmnds(devinfo) != 0) {
1128 		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
1129 		scsi_unblock_requests(shost);
1130 		return 1;
1131 	}
1132 
1133 	uas_free_streams(devinfo);
1134 
1135 	return 0;
1136 }
1137 
1138 static int uas_post_reset(struct usb_interface *intf)
1139 {
1140 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1141 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1142 	unsigned long flags;
1143 	int err;
1144 
1145 	if (devinfo->shutdown)
1146 		return 0;
1147 
1148 	err = uas_configure_endpoints(devinfo);
1149 	if (err && err != -ENODEV)
1150 		shost_printk(KERN_ERR, shost,
1151 			     "%s: alloc streams error %d after reset",
1152 			     __func__, err);
1153 
1154 	/* we must unblock the host in every case lest we deadlock */
1155 	spin_lock_irqsave(shost->host_lock, flags);
1156 	scsi_report_bus_reset(shost, 0);
1157 	spin_unlock_irqrestore(shost->host_lock, flags);
1158 
1159 	scsi_unblock_requests(shost);
1160 
1161 	return err ? 1 : 0;
1162 }
1163 
1164 static int uas_suspend(struct usb_interface *intf, pm_message_t message)
1165 {
1166 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1167 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1168 
1169 	if (uas_wait_for_pending_cmnds(devinfo) != 0) {
1170 		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
1171 		return -ETIME;
1172 	}
1173 
1174 	return 0;
1175 }
1176 
1177 static int uas_resume(struct usb_interface *intf)
1178 {
1179 	return 0;
1180 }
1181 
1182 static int uas_reset_resume(struct usb_interface *intf)
1183 {
1184 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1185 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1186 	unsigned long flags;
1187 	int err;
1188 
1189 	err = uas_configure_endpoints(devinfo);
1190 	if (err) {
1191 		shost_printk(KERN_ERR, shost,
1192 			     "%s: alloc streams error %d after reset",
1193 			     __func__, err);
1194 		return -EIO;
1195 	}
1196 
1197 	spin_lock_irqsave(shost->host_lock, flags);
1198 	scsi_report_bus_reset(shost, 0);
1199 	spin_unlock_irqrestore(shost->host_lock, flags);
1200 
1201 	return 0;
1202 }
1203 
1204 static void uas_disconnect(struct usb_interface *intf)
1205 {
1206 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1207 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1208 	unsigned long flags;
1209 
1210 	spin_lock_irqsave(&devinfo->lock, flags);
1211 	devinfo->resetting = 1;
1212 	spin_unlock_irqrestore(&devinfo->lock, flags);
1213 
1214 	cancel_work_sync(&devinfo->work);
1215 	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
1216 	usb_kill_anchored_urbs(&devinfo->sense_urbs);
1217 	usb_kill_anchored_urbs(&devinfo->data_urbs);
1218 	uas_zap_pending(devinfo, DID_NO_CONNECT);
1219 
1220 	/*
1221 	 * Prevent SCSI scanning (if it hasn't started yet)
1222 	 * or wait for the SCSI-scanning routine to stop.
1223 	 */
1224 	cancel_work_sync(&devinfo->scan_work);
1225 
1226 	scsi_remove_host(shost);
1227 	uas_free_streams(devinfo);
1228 	scsi_host_put(shost);
1229 }
1230 
1231 /*
1232  * Put the device back in usb-storage mode on shutdown, as some BIOS-es
1233  * hang on reboot when the device is still in uas mode. Note the reset is
1234  * necessary as some devices won't revert to usb-storage mode without it.
1235  */
1236 static void uas_shutdown(struct usb_interface *intf)
1237 {
1238 	struct usb_device *udev = interface_to_usbdev(intf);
1239 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1240 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1241 
1242 	if (system_state != SYSTEM_RESTART)
1243 		return;
1244 
1245 	devinfo->shutdown = 1;
1246 	uas_free_streams(devinfo);
1247 	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
1248 	usb_reset_device(udev);
1249 }
1250 
1251 static struct usb_driver uas_driver = {
1252 	.name = "uas",
1253 	.probe = uas_probe,
1254 	.disconnect = uas_disconnect,
1255 	.pre_reset = uas_pre_reset,
1256 	.post_reset = uas_post_reset,
1257 	.suspend = uas_suspend,
1258 	.resume = uas_resume,
1259 	.reset_resume = uas_reset_resume,
1260 	.shutdown = uas_shutdown,
1261 	.id_table = uas_usb_ids,
1262 };
1263 
1264 static int __init uas_init(void)
1265 {
1266 	int rv;
1267 
1268 	workqueue = alloc_workqueue("uas", WQ_MEM_RECLAIM, 0);
1269 	if (!workqueue)
1270 		return -ENOMEM;
1271 
1272 	rv = usb_register(&uas_driver);
1273 	if (rv) {
1274 		destroy_workqueue(workqueue);
1275 		return -ENOMEM;
1276 	}
1277 
1278 	return 0;
1279 }
1280 
1281 static void __exit uas_exit(void)
1282 {
1283 	usb_deregister(&uas_driver);
1284 	destroy_workqueue(workqueue);
1285 }
1286 
1287 module_init(uas_init);
1288 module_exit(uas_exit);
1289 
1290 MODULE_DESCRIPTION("USB Attached SCSI driver");
1291 MODULE_LICENSE("GPL");
1292 MODULE_IMPORT_NS(USB_STORAGE);
1293 MODULE_AUTHOR(
1294 	"Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp");
1295