1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * USB Attached SCSI 4 * Note that this is not the same as the USB Mass Storage driver 5 * 6 * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016 7 * Copyright Matthew Wilcox for Intel Corp, 2010 8 * Copyright Sarah Sharp for Intel Corp, 2010 9 */ 10 11 #include <linux/blkdev.h> 12 #include <linux/slab.h> 13 #include <linux/types.h> 14 #include <linux/module.h> 15 #include <linux/usb.h> 16 #include <linux/usb_usual.h> 17 #include <linux/usb/hcd.h> 18 #include <linux/usb/storage.h> 19 #include <linux/usb/uas.h> 20 21 #include <scsi/scsi.h> 22 #include <scsi/scsi_eh.h> 23 #include <scsi/scsi_dbg.h> 24 #include <scsi/scsi_devinfo.h> 25 #include <scsi/scsi_cmnd.h> 26 #include <scsi/scsi_device.h> 27 #include <scsi/scsi_host.h> 28 #include <scsi/scsi_tcq.h> 29 30 #include "uas-detect.h" 31 #include "scsiglue.h" 32 33 #define MAX_CMNDS 256 34 35 struct uas_dev_info { 36 struct usb_interface *intf; 37 struct usb_device *udev; 38 struct usb_anchor cmd_urbs; 39 struct usb_anchor sense_urbs; 40 struct usb_anchor data_urbs; 41 u64 flags; 42 int qdepth, resetting; 43 unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe; 44 unsigned use_streams:1; 45 unsigned shutdown:1; 46 struct scsi_cmnd *cmnd[MAX_CMNDS]; 47 spinlock_t lock; 48 struct work_struct work; 49 struct work_struct scan_work; /* for async scanning */ 50 }; 51 52 enum { 53 SUBMIT_STATUS_URB = BIT(1), 54 ALLOC_DATA_IN_URB = BIT(2), 55 SUBMIT_DATA_IN_URB = BIT(3), 56 ALLOC_DATA_OUT_URB = BIT(4), 57 SUBMIT_DATA_OUT_URB = BIT(5), 58 ALLOC_CMD_URB = BIT(6), 59 SUBMIT_CMD_URB = BIT(7), 60 COMMAND_INFLIGHT = BIT(8), 61 DATA_IN_URB_INFLIGHT = BIT(9), 62 DATA_OUT_URB_INFLIGHT = BIT(10), 63 COMMAND_ABORTED = BIT(11), 64 IS_IN_WORK_LIST = BIT(12), 65 }; 66 67 /* Overrides scsi_pointer */ 68 struct uas_cmd_info { 69 unsigned int state; 70 unsigned int uas_tag; 71 struct urb *cmd_urb; 72 struct urb *data_in_urb; 73 struct urb *data_out_urb; 74 }; 75 76 /* I hate forward declarations, but I actually have a loop */ 77 static int uas_submit_urbs(struct scsi_cmnd *cmnd, 78 struct uas_dev_info *devinfo); 79 static void uas_do_work(struct work_struct *work); 80 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller); 81 static void uas_free_streams(struct uas_dev_info *devinfo); 82 static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix, 83 int status); 84 85 /* 86 * This driver needs its own workqueue, as we need to control memory allocation. 87 * 88 * In the course of error handling and power management uas_wait_for_pending_cmnds() 89 * needs to flush pending work items. In these contexts we cannot allocate memory 90 * by doing block IO as we would deadlock. For the same reason we cannot wait 91 * for anything allocating memory not heeding these constraints. 92 * 93 * So we have to control all work items that can be on the workqueue we flush. 94 * Hence we cannot share a queue and need our own. 95 */ 96 static struct workqueue_struct *workqueue; 97 98 static void uas_do_work(struct work_struct *work) 99 { 100 struct uas_dev_info *devinfo = 101 container_of(work, struct uas_dev_info, work); 102 struct uas_cmd_info *cmdinfo; 103 struct scsi_cmnd *cmnd; 104 unsigned long flags; 105 int i, err; 106 107 spin_lock_irqsave(&devinfo->lock, flags); 108 109 if (devinfo->resetting) 110 goto out; 111 112 for (i = 0; i < devinfo->qdepth; i++) { 113 if (!devinfo->cmnd[i]) 114 continue; 115 116 cmnd = devinfo->cmnd[i]; 117 cmdinfo = scsi_cmd_priv(cmnd); 118 119 if (!(cmdinfo->state & IS_IN_WORK_LIST)) 120 continue; 121 122 err = uas_submit_urbs(cmnd, cmnd->device->hostdata); 123 if (!err) 124 cmdinfo->state &= ~IS_IN_WORK_LIST; 125 else 126 queue_work(workqueue, &devinfo->work); 127 } 128 out: 129 spin_unlock_irqrestore(&devinfo->lock, flags); 130 } 131 132 static void uas_scan_work(struct work_struct *work) 133 { 134 struct uas_dev_info *devinfo = 135 container_of(work, struct uas_dev_info, scan_work); 136 struct Scsi_Host *shost = usb_get_intfdata(devinfo->intf); 137 138 dev_dbg(&devinfo->intf->dev, "starting scan\n"); 139 scsi_scan_host(shost); 140 dev_dbg(&devinfo->intf->dev, "scan complete\n"); 141 } 142 143 static void uas_add_work(struct scsi_cmnd *cmnd) 144 { 145 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); 146 struct uas_dev_info *devinfo = cmnd->device->hostdata; 147 148 lockdep_assert_held(&devinfo->lock); 149 cmdinfo->state |= IS_IN_WORK_LIST; 150 queue_work(workqueue, &devinfo->work); 151 } 152 153 static void uas_zap_pending(struct uas_dev_info *devinfo, int result) 154 { 155 struct uas_cmd_info *cmdinfo; 156 struct scsi_cmnd *cmnd; 157 unsigned long flags; 158 int i, err; 159 160 spin_lock_irqsave(&devinfo->lock, flags); 161 for (i = 0; i < devinfo->qdepth; i++) { 162 if (!devinfo->cmnd[i]) 163 continue; 164 165 cmnd = devinfo->cmnd[i]; 166 cmdinfo = scsi_cmd_priv(cmnd); 167 uas_log_cmd_state(cmnd, __func__, 0); 168 /* Sense urbs were killed, clear COMMAND_INFLIGHT manually */ 169 cmdinfo->state &= ~COMMAND_INFLIGHT; 170 cmnd->result = result << 16; 171 err = uas_try_complete(cmnd, __func__); 172 WARN_ON(err != 0); 173 } 174 spin_unlock_irqrestore(&devinfo->lock, flags); 175 } 176 177 static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd) 178 { 179 struct sense_iu *sense_iu = urb->transfer_buffer; 180 struct scsi_device *sdev = cmnd->device; 181 182 if (urb->actual_length > 16) { 183 unsigned len = be16_to_cpup(&sense_iu->len); 184 if (len + 16 != urb->actual_length) { 185 int newlen = min(len + 16, urb->actual_length) - 16; 186 if (newlen < 0) 187 newlen = 0; 188 sdev_printk(KERN_INFO, sdev, "%s: urb length %d " 189 "disagrees with IU sense data length %d, " 190 "using %d bytes of sense data\n", __func__, 191 urb->actual_length, len, newlen); 192 len = newlen; 193 } 194 memcpy(cmnd->sense_buffer, sense_iu->sense, len); 195 } 196 197 cmnd->result = sense_iu->status; 198 } 199 200 static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix, 201 int status) 202 { 203 struct uas_cmd_info *ci = scsi_cmd_priv(cmnd); 204 205 if (status == -ENODEV) /* too late */ 206 return; 207 208 scmd_printk(KERN_INFO, cmnd, 209 "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ", 210 prefix, status, ci->uas_tag, 211 (ci->state & SUBMIT_STATUS_URB) ? " s-st" : "", 212 (ci->state & ALLOC_DATA_IN_URB) ? " a-in" : "", 213 (ci->state & SUBMIT_DATA_IN_URB) ? " s-in" : "", 214 (ci->state & ALLOC_DATA_OUT_URB) ? " a-out" : "", 215 (ci->state & SUBMIT_DATA_OUT_URB) ? " s-out" : "", 216 (ci->state & ALLOC_CMD_URB) ? " a-cmd" : "", 217 (ci->state & SUBMIT_CMD_URB) ? " s-cmd" : "", 218 (ci->state & COMMAND_INFLIGHT) ? " CMD" : "", 219 (ci->state & DATA_IN_URB_INFLIGHT) ? " IN" : "", 220 (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT" : "", 221 (ci->state & COMMAND_ABORTED) ? " abort" : "", 222 (ci->state & IS_IN_WORK_LIST) ? " work" : ""); 223 scsi_print_command(cmnd); 224 } 225 226 static void uas_free_unsubmitted_urbs(struct scsi_cmnd *cmnd) 227 { 228 struct uas_cmd_info *cmdinfo; 229 230 if (!cmnd) 231 return; 232 233 cmdinfo = scsi_cmd_priv(cmnd); 234 235 if (cmdinfo->state & SUBMIT_CMD_URB) 236 usb_free_urb(cmdinfo->cmd_urb); 237 238 /* data urbs may have never gotten their submit flag set */ 239 if (!(cmdinfo->state & DATA_IN_URB_INFLIGHT)) 240 usb_free_urb(cmdinfo->data_in_urb); 241 if (!(cmdinfo->state & DATA_OUT_URB_INFLIGHT)) 242 usb_free_urb(cmdinfo->data_out_urb); 243 } 244 245 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller) 246 { 247 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); 248 struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; 249 250 lockdep_assert_held(&devinfo->lock); 251 if (cmdinfo->state & (COMMAND_INFLIGHT | 252 DATA_IN_URB_INFLIGHT | 253 DATA_OUT_URB_INFLIGHT | 254 COMMAND_ABORTED)) 255 return -EBUSY; 256 devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL; 257 uas_free_unsubmitted_urbs(cmnd); 258 scsi_done(cmnd); 259 return 0; 260 } 261 262 static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd, 263 unsigned direction) 264 { 265 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); 266 int err; 267 268 cmdinfo->state |= direction | SUBMIT_STATUS_URB; 269 err = uas_submit_urbs(cmnd, cmnd->device->hostdata); 270 if (err) { 271 uas_add_work(cmnd); 272 } 273 } 274 275 static bool uas_evaluate_response_iu(struct response_iu *riu, struct scsi_cmnd *cmnd) 276 { 277 u8 response_code = riu->response_code; 278 279 switch (response_code) { 280 case RC_INCORRECT_LUN: 281 set_host_byte(cmnd, DID_BAD_TARGET); 282 break; 283 case RC_TMF_SUCCEEDED: 284 set_host_byte(cmnd, DID_OK); 285 break; 286 case RC_TMF_NOT_SUPPORTED: 287 set_host_byte(cmnd, DID_BAD_TARGET); 288 break; 289 default: 290 uas_log_cmd_state(cmnd, "response iu", response_code); 291 set_host_byte(cmnd, DID_ERROR); 292 break; 293 } 294 295 return response_code == RC_TMF_SUCCEEDED; 296 } 297 298 static void uas_stat_cmplt(struct urb *urb) 299 { 300 struct iu *iu = urb->transfer_buffer; 301 struct Scsi_Host *shost = urb->context; 302 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; 303 struct urb *data_in_urb = NULL; 304 struct urb *data_out_urb = NULL; 305 struct scsi_cmnd *cmnd; 306 struct uas_cmd_info *cmdinfo; 307 unsigned long flags; 308 unsigned int idx; 309 int status = urb->status; 310 bool success; 311 312 if (status) { 313 if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN) 314 dev_err(&urb->dev->dev, "stat urb: status %d\n", status); 315 goto bail; 316 } 317 318 idx = be16_to_cpup(&iu->tag) - 1; 319 320 spin_lock_irqsave(&devinfo->lock, flags); 321 322 if (devinfo->resetting) 323 goto out; 324 if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) { 325 dev_err(&urb->dev->dev, 326 "stat urb: no pending cmd for uas-tag %d\n", idx + 1); 327 goto out; 328 } 329 330 cmnd = devinfo->cmnd[idx]; 331 cmdinfo = scsi_cmd_priv(cmnd); 332 333 if (!(cmdinfo->state & COMMAND_INFLIGHT)) { 334 uas_log_cmd_state(cmnd, "unexpected status cmplt", 0); 335 goto out; 336 } 337 338 switch (iu->iu_id) { 339 case IU_ID_STATUS: 340 uas_sense(urb, cmnd); 341 if (cmnd->result != 0) { 342 /* cancel data transfers on error */ 343 data_in_urb = usb_get_urb(cmdinfo->data_in_urb); 344 data_out_urb = usb_get_urb(cmdinfo->data_out_urb); 345 } 346 cmdinfo->state &= ~COMMAND_INFLIGHT; 347 uas_try_complete(cmnd, __func__); 348 break; 349 case IU_ID_READ_READY: 350 if (!cmdinfo->data_in_urb || 351 (cmdinfo->state & DATA_IN_URB_INFLIGHT)) { 352 uas_log_cmd_state(cmnd, "unexpected read rdy", 0); 353 break; 354 } 355 uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB); 356 break; 357 case IU_ID_WRITE_READY: 358 if (!cmdinfo->data_out_urb || 359 (cmdinfo->state & DATA_OUT_URB_INFLIGHT)) { 360 uas_log_cmd_state(cmnd, "unexpected write rdy", 0); 361 break; 362 } 363 uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB); 364 break; 365 case IU_ID_RESPONSE: 366 cmdinfo->state &= ~COMMAND_INFLIGHT; 367 success = uas_evaluate_response_iu((struct response_iu *)iu, cmnd); 368 if (!success) { 369 /* Error, cancel data transfers */ 370 data_in_urb = usb_get_urb(cmdinfo->data_in_urb); 371 data_out_urb = usb_get_urb(cmdinfo->data_out_urb); 372 } 373 uas_try_complete(cmnd, __func__); 374 break; 375 default: 376 uas_log_cmd_state(cmnd, "bogus IU", iu->iu_id); 377 } 378 spin_unlock_irqrestore(&devinfo->lock, flags); 379 usb_free_urb(urb); 380 381 /* Unlinking of data urbs must be done without holding the lock */ 382 if (data_in_urb) { 383 usb_unlink_urb(data_in_urb); 384 usb_put_urb(data_in_urb); 385 } 386 if (data_out_urb) { 387 usb_unlink_urb(data_out_urb); 388 usb_put_urb(data_out_urb); 389 } 390 return; 391 392 out: 393 spin_unlock_irqrestore(&devinfo->lock, flags); 394 bail: 395 usb_free_urb(urb); 396 } 397 398 static void uas_data_cmplt(struct urb *urb) 399 { 400 struct scsi_cmnd *cmnd = urb->context; 401 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); 402 struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; 403 struct scsi_data_buffer *sdb = &cmnd->sdb; 404 unsigned long flags; 405 int status = urb->status; 406 407 spin_lock_irqsave(&devinfo->lock, flags); 408 409 if (cmdinfo->data_in_urb == urb) { 410 cmdinfo->state &= ~DATA_IN_URB_INFLIGHT; 411 cmdinfo->data_in_urb = NULL; 412 } else if (cmdinfo->data_out_urb == urb) { 413 cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT; 414 cmdinfo->data_out_urb = NULL; 415 } 416 417 if (devinfo->resetting) 418 goto out; 419 420 /* Data urbs should not complete before the cmd urb is submitted */ 421 if (cmdinfo->state & SUBMIT_CMD_URB) { 422 uas_log_cmd_state(cmnd, "unexpected data cmplt", 0); 423 goto out; 424 } 425 426 if (status) { 427 if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN) 428 uas_log_cmd_state(cmnd, "data cmplt err", status); 429 /* error: no data transfered */ 430 scsi_set_resid(cmnd, sdb->length); 431 set_host_byte(cmnd, DID_ERROR); 432 } else { 433 scsi_set_resid(cmnd, sdb->length - urb->actual_length); 434 } 435 uas_try_complete(cmnd, __func__); 436 out: 437 spin_unlock_irqrestore(&devinfo->lock, flags); 438 usb_free_urb(urb); 439 } 440 441 static void uas_cmd_cmplt(struct urb *urb) 442 { 443 if (urb->status) 444 dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status); 445 446 usb_free_urb(urb); 447 } 448 449 static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp, 450 struct scsi_cmnd *cmnd, 451 enum dma_data_direction dir) 452 { 453 struct usb_device *udev = devinfo->udev; 454 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); 455 struct urb *urb = usb_alloc_urb(0, gfp); 456 struct scsi_data_buffer *sdb = &cmnd->sdb; 457 unsigned int pipe = (dir == DMA_FROM_DEVICE) 458 ? devinfo->data_in_pipe : devinfo->data_out_pipe; 459 460 if (!urb) 461 goto out; 462 usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, 463 uas_data_cmplt, cmnd); 464 if (devinfo->use_streams) 465 urb->stream_id = cmdinfo->uas_tag; 466 urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0; 467 urb->sg = sdb->table.sgl; 468 out: 469 return urb; 470 } 471 472 static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp, 473 struct scsi_cmnd *cmnd) 474 { 475 struct usb_device *udev = devinfo->udev; 476 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); 477 struct urb *urb = usb_alloc_urb(0, gfp); 478 struct sense_iu *iu; 479 480 if (!urb) 481 goto out; 482 483 iu = kzalloc(sizeof(*iu), gfp); 484 if (!iu) 485 goto free; 486 487 usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu), 488 uas_stat_cmplt, cmnd->device->host); 489 if (devinfo->use_streams) 490 urb->stream_id = cmdinfo->uas_tag; 491 urb->transfer_flags |= URB_FREE_BUFFER; 492 out: 493 return urb; 494 free: 495 usb_free_urb(urb); 496 return NULL; 497 } 498 499 static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, 500 struct scsi_cmnd *cmnd) 501 { 502 struct usb_device *udev = devinfo->udev; 503 struct scsi_device *sdev = cmnd->device; 504 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); 505 struct urb *urb = usb_alloc_urb(0, gfp); 506 struct command_iu *iu; 507 int len; 508 509 if (!urb) 510 goto out; 511 512 len = cmnd->cmd_len - 16; 513 if (len < 0) 514 len = 0; 515 len = ALIGN(len, 4); 516 iu = kzalloc(sizeof(*iu) + len, gfp); 517 if (!iu) 518 goto free; 519 520 iu->iu_id = IU_ID_COMMAND; 521 iu->tag = cpu_to_be16(cmdinfo->uas_tag); 522 iu->prio_attr = UAS_SIMPLE_TAG; 523 iu->len = len; 524 int_to_scsilun(sdev->lun, &iu->lun); 525 memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len); 526 527 usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len, 528 uas_cmd_cmplt, NULL); 529 urb->transfer_flags |= URB_FREE_BUFFER; 530 out: 531 return urb; 532 free: 533 usb_free_urb(urb); 534 return NULL; 535 } 536 537 /* 538 * Why should I request the Status IU before sending the Command IU? Spec 539 * says to, but also says the device may receive them in any order. Seems 540 * daft to me. 541 */ 542 543 static int uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) 544 { 545 struct uas_dev_info *devinfo = cmnd->device->hostdata; 546 struct urb *urb; 547 int err; 548 549 urb = uas_alloc_sense_urb(devinfo, gfp, cmnd); 550 if (!urb) 551 return -ENOMEM; 552 usb_anchor_urb(urb, &devinfo->sense_urbs); 553 err = usb_submit_urb(urb, gfp); 554 if (err) { 555 usb_unanchor_urb(urb); 556 uas_log_cmd_state(cmnd, "sense submit err", err); 557 usb_free_urb(urb); 558 } 559 return err; 560 } 561 562 static int uas_submit_urbs(struct scsi_cmnd *cmnd, 563 struct uas_dev_info *devinfo) 564 { 565 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); 566 int err; 567 568 lockdep_assert_held(&devinfo->lock); 569 if (cmdinfo->state & SUBMIT_STATUS_URB) { 570 err = uas_submit_sense_urb(cmnd, GFP_ATOMIC); 571 if (err) 572 return err; 573 cmdinfo->state &= ~SUBMIT_STATUS_URB; 574 } 575 576 if (cmdinfo->state & ALLOC_DATA_IN_URB) { 577 cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, 578 cmnd, DMA_FROM_DEVICE); 579 if (!cmdinfo->data_in_urb) 580 return -ENOMEM; 581 cmdinfo->state &= ~ALLOC_DATA_IN_URB; 582 } 583 584 if (cmdinfo->state & SUBMIT_DATA_IN_URB) { 585 usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs); 586 err = usb_submit_urb(cmdinfo->data_in_urb, GFP_ATOMIC); 587 if (err) { 588 usb_unanchor_urb(cmdinfo->data_in_urb); 589 uas_log_cmd_state(cmnd, "data in submit err", err); 590 return err; 591 } 592 cmdinfo->state &= ~SUBMIT_DATA_IN_URB; 593 cmdinfo->state |= DATA_IN_URB_INFLIGHT; 594 } 595 596 if (cmdinfo->state & ALLOC_DATA_OUT_URB) { 597 cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, 598 cmnd, DMA_TO_DEVICE); 599 if (!cmdinfo->data_out_urb) 600 return -ENOMEM; 601 cmdinfo->state &= ~ALLOC_DATA_OUT_URB; 602 } 603 604 if (cmdinfo->state & SUBMIT_DATA_OUT_URB) { 605 usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs); 606 err = usb_submit_urb(cmdinfo->data_out_urb, GFP_ATOMIC); 607 if (err) { 608 usb_unanchor_urb(cmdinfo->data_out_urb); 609 uas_log_cmd_state(cmnd, "data out submit err", err); 610 return err; 611 } 612 cmdinfo->state &= ~SUBMIT_DATA_OUT_URB; 613 cmdinfo->state |= DATA_OUT_URB_INFLIGHT; 614 } 615 616 if (cmdinfo->state & ALLOC_CMD_URB) { 617 cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd); 618 if (!cmdinfo->cmd_urb) 619 return -ENOMEM; 620 cmdinfo->state &= ~ALLOC_CMD_URB; 621 } 622 623 if (cmdinfo->state & SUBMIT_CMD_URB) { 624 usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs); 625 err = usb_submit_urb(cmdinfo->cmd_urb, GFP_ATOMIC); 626 if (err) { 627 usb_unanchor_urb(cmdinfo->cmd_urb); 628 uas_log_cmd_state(cmnd, "cmd submit err", err); 629 return err; 630 } 631 cmdinfo->cmd_urb = NULL; 632 cmdinfo->state &= ~SUBMIT_CMD_URB; 633 cmdinfo->state |= COMMAND_INFLIGHT; 634 } 635 636 return 0; 637 } 638 639 static int uas_queuecommand_lck(struct scsi_cmnd *cmnd) 640 { 641 struct scsi_device *sdev = cmnd->device; 642 struct uas_dev_info *devinfo = sdev->hostdata; 643 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); 644 unsigned long flags; 645 int idx, err; 646 647 /* Re-check scsi_block_requests now that we've the host-lock */ 648 if (cmnd->device->host->host_self_blocked) 649 return SCSI_MLQUEUE_DEVICE_BUSY; 650 651 if ((devinfo->flags & US_FL_NO_ATA_1X) && 652 (cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) { 653 memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB, 654 sizeof(usb_stor_sense_invalidCDB)); 655 cmnd->result = SAM_STAT_CHECK_CONDITION; 656 scsi_done(cmnd); 657 return 0; 658 } 659 660 spin_lock_irqsave(&devinfo->lock, flags); 661 662 if (devinfo->resetting) { 663 set_host_byte(cmnd, DID_ERROR); 664 scsi_done(cmnd); 665 goto zombie; 666 } 667 668 /* Find a free uas-tag */ 669 for (idx = 0; idx < devinfo->qdepth; idx++) { 670 if (!devinfo->cmnd[idx]) 671 break; 672 } 673 if (idx == devinfo->qdepth) { 674 spin_unlock_irqrestore(&devinfo->lock, flags); 675 return SCSI_MLQUEUE_DEVICE_BUSY; 676 } 677 678 memset(cmdinfo, 0, sizeof(*cmdinfo)); 679 cmdinfo->uas_tag = idx + 1; /* uas-tag == usb-stream-id, so 1 based */ 680 cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB; 681 682 switch (cmnd->sc_data_direction) { 683 case DMA_FROM_DEVICE: 684 cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; 685 break; 686 case DMA_BIDIRECTIONAL: 687 cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; 688 fallthrough; 689 case DMA_TO_DEVICE: 690 cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB; 691 break; 692 case DMA_NONE: 693 break; 694 } 695 696 if (!devinfo->use_streams) 697 cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB); 698 699 err = uas_submit_urbs(cmnd, devinfo); 700 /* 701 * in case of fatal errors the SCSI layer is peculiar 702 * a command that has finished is a success for the purpose 703 * of queueing, no matter how fatal the error 704 */ 705 if (err == -ENODEV) { 706 if (cmdinfo->state & (COMMAND_INFLIGHT | DATA_IN_URB_INFLIGHT | 707 DATA_OUT_URB_INFLIGHT)) 708 goto out; 709 710 set_host_byte(cmnd, DID_NO_CONNECT); 711 scsi_done(cmnd); 712 goto zombie; 713 } 714 if (err) { 715 /* If we did nothing, give up now */ 716 if (cmdinfo->state & SUBMIT_STATUS_URB) { 717 spin_unlock_irqrestore(&devinfo->lock, flags); 718 return SCSI_MLQUEUE_DEVICE_BUSY; 719 } 720 uas_add_work(cmnd); 721 } 722 723 out: 724 devinfo->cmnd[idx] = cmnd; 725 zombie: 726 spin_unlock_irqrestore(&devinfo->lock, flags); 727 return 0; 728 } 729 730 static DEF_SCSI_QCMD(uas_queuecommand) 731 732 /* 733 * For now we do not support actually sending an abort to the device, so 734 * this eh always fails. Still we must define it to make sure that we've 735 * dropped all references to the cmnd in question once this function exits. 736 */ 737 static int uas_eh_abort_handler(struct scsi_cmnd *cmnd) 738 { 739 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); 740 struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; 741 struct urb *data_in_urb = NULL; 742 struct urb *data_out_urb = NULL; 743 unsigned long flags; 744 745 spin_lock_irqsave(&devinfo->lock, flags); 746 747 uas_log_cmd_state(cmnd, __func__, 0); 748 749 /* Ensure that try_complete does not call scsi_done */ 750 cmdinfo->state |= COMMAND_ABORTED; 751 752 /* Drop all refs to this cmnd, kill data urbs to break their ref */ 753 devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL; 754 if (cmdinfo->state & DATA_IN_URB_INFLIGHT) 755 data_in_urb = usb_get_urb(cmdinfo->data_in_urb); 756 if (cmdinfo->state & DATA_OUT_URB_INFLIGHT) 757 data_out_urb = usb_get_urb(cmdinfo->data_out_urb); 758 759 uas_free_unsubmitted_urbs(cmnd); 760 761 spin_unlock_irqrestore(&devinfo->lock, flags); 762 763 if (data_in_urb) { 764 usb_kill_urb(data_in_urb); 765 usb_put_urb(data_in_urb); 766 } 767 if (data_out_urb) { 768 usb_kill_urb(data_out_urb); 769 usb_put_urb(data_out_urb); 770 } 771 772 return FAILED; 773 } 774 775 static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd) 776 { 777 struct scsi_device *sdev = cmnd->device; 778 struct uas_dev_info *devinfo = sdev->hostdata; 779 struct usb_device *udev = devinfo->udev; 780 unsigned long flags; 781 int err; 782 783 err = usb_lock_device_for_reset(udev, devinfo->intf); 784 if (err) { 785 shost_printk(KERN_ERR, sdev->host, 786 "%s FAILED to get lock err %d\n", __func__, err); 787 return FAILED; 788 } 789 790 shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__); 791 792 spin_lock_irqsave(&devinfo->lock, flags); 793 devinfo->resetting = 1; 794 spin_unlock_irqrestore(&devinfo->lock, flags); 795 796 usb_kill_anchored_urbs(&devinfo->cmd_urbs); 797 usb_kill_anchored_urbs(&devinfo->sense_urbs); 798 usb_kill_anchored_urbs(&devinfo->data_urbs); 799 uas_zap_pending(devinfo, DID_RESET); 800 801 err = usb_reset_device(udev); 802 803 spin_lock_irqsave(&devinfo->lock, flags); 804 devinfo->resetting = 0; 805 spin_unlock_irqrestore(&devinfo->lock, flags); 806 807 usb_unlock_device(udev); 808 809 if (err) { 810 shost_printk(KERN_INFO, sdev->host, "%s FAILED err %d\n", 811 __func__, err); 812 return FAILED; 813 } 814 815 shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__); 816 return SUCCESS; 817 } 818 819 static int uas_target_alloc(struct scsi_target *starget) 820 { 821 struct uas_dev_info *devinfo = (struct uas_dev_info *) 822 dev_to_shost(starget->dev.parent)->hostdata; 823 824 if (devinfo->flags & US_FL_NO_REPORT_LUNS) 825 starget->no_report_luns = 1; 826 827 return 0; 828 } 829 830 static int uas_sdev_init(struct scsi_device *sdev) 831 { 832 struct uas_dev_info *devinfo = 833 (struct uas_dev_info *)sdev->host->hostdata; 834 835 /* 836 * Some USB storage devices reset if the IO advice hints grouping mode 837 * page is queried. Hence skip that mode page. 838 */ 839 sdev->sdev_bflags |= BLIST_SKIP_IO_HINTS; 840 841 sdev->hostdata = devinfo; 842 return 0; 843 } 844 845 static int uas_sdev_configure(struct scsi_device *sdev, 846 struct queue_limits *lim) 847 { 848 struct uas_dev_info *devinfo = sdev->hostdata; 849 850 if (devinfo->flags & US_FL_MAX_SECTORS_64) 851 lim->max_hw_sectors = 64; 852 else if (devinfo->flags & US_FL_MAX_SECTORS_240) 853 lim->max_hw_sectors = 240; 854 855 if (devinfo->flags & US_FL_NO_REPORT_OPCODES) 856 sdev->no_report_opcodes = 1; 857 858 /* A few buggy USB-ATA bridges don't understand FUA */ 859 if (devinfo->flags & US_FL_BROKEN_FUA) 860 sdev->broken_fua = 1; 861 862 /* UAS also needs to support FL_ALWAYS_SYNC */ 863 if (devinfo->flags & US_FL_ALWAYS_SYNC) { 864 sdev->skip_ms_page_3f = 1; 865 sdev->skip_ms_page_8 = 1; 866 sdev->wce_default_on = 1; 867 } 868 869 /* Some disks cannot handle READ_CAPACITY_16 */ 870 if (devinfo->flags & US_FL_NO_READ_CAPACITY_16) 871 sdev->no_read_capacity_16 = 1; 872 873 /* Some disks cannot handle WRITE_SAME */ 874 if (devinfo->flags & US_FL_NO_SAME) 875 sdev->no_write_same = 1; 876 /* 877 * Some disks return the total number of blocks in response 878 * to READ CAPACITY rather than the highest block number. 879 * If this device makes that mistake, tell the sd driver. 880 */ 881 if (devinfo->flags & US_FL_FIX_CAPACITY) 882 sdev->fix_capacity = 1; 883 884 /* 885 * in some cases we have to guess 886 */ 887 if (devinfo->flags & US_FL_CAPACITY_HEURISTICS) 888 sdev->guess_capacity = 1; 889 890 /* 891 * Some devices report generic values until the media has been 892 * accessed. Force a READ(10) prior to querying device 893 * characteristics. 894 */ 895 sdev->read_before_ms = 1; 896 897 /* 898 * Some devices don't like MODE SENSE with page=0x3f, 899 * which is the command used for checking if a device 900 * is write-protected. Now that we tell the sd driver 901 * to do a 192-byte transfer with this command the 902 * majority of devices work fine, but a few still can't 903 * handle it. The sd driver will simply assume those 904 * devices are write-enabled. 905 */ 906 if (devinfo->flags & US_FL_NO_WP_DETECT) 907 sdev->skip_ms_page_3f = 1; 908 909 scsi_change_queue_depth(sdev, devinfo->qdepth - 2); 910 return 0; 911 } 912 913 static const struct scsi_host_template uas_host_template = { 914 .module = THIS_MODULE, 915 .name = "uas", 916 .queuecommand = uas_queuecommand, 917 .target_alloc = uas_target_alloc, 918 .sdev_init = uas_sdev_init, 919 .sdev_configure = uas_sdev_configure, 920 .eh_abort_handler = uas_eh_abort_handler, 921 .eh_device_reset_handler = uas_eh_device_reset_handler, 922 .this_id = -1, 923 .skip_settle_delay = 1, 924 /* 925 * The protocol has no requirements on alignment in the strict sense. 926 * Controllers may or may not have alignment restrictions. 927 * As this is not exported, we use an extremely conservative guess. 928 */ 929 .dma_alignment = 511, 930 .dma_boundary = PAGE_SIZE - 1, 931 .cmd_size = sizeof(struct uas_cmd_info), 932 }; 933 934 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ 935 vendorName, productName, useProtocol, useTransport, \ 936 initFunction, flags) \ 937 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ 938 .driver_info = (flags) } 939 940 static const struct usb_device_id uas_usb_ids[] = { 941 # include "unusual_uas.h" 942 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) }, 943 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) }, 944 { } 945 }; 946 MODULE_DEVICE_TABLE(usb, uas_usb_ids); 947 948 #undef UNUSUAL_DEV 949 950 static int uas_switch_interface(struct usb_device *udev, 951 struct usb_interface *intf) 952 { 953 struct usb_host_interface *alt; 954 955 alt = uas_find_uas_alt_setting(intf); 956 if (!alt) 957 return -ENODEV; 958 959 return usb_set_interface(udev, alt->desc.bInterfaceNumber, 960 alt->desc.bAlternateSetting); 961 } 962 963 static int uas_configure_endpoints(struct uas_dev_info *devinfo) 964 { 965 struct usb_host_endpoint *eps[4] = { }; 966 struct usb_device *udev = devinfo->udev; 967 int r; 968 969 r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps); 970 if (r) 971 return r; 972 973 devinfo->cmd_pipe = usb_sndbulkpipe(udev, 974 usb_endpoint_num(&eps[0]->desc)); 975 devinfo->status_pipe = usb_rcvbulkpipe(udev, 976 usb_endpoint_num(&eps[1]->desc)); 977 devinfo->data_in_pipe = usb_rcvbulkpipe(udev, 978 usb_endpoint_num(&eps[2]->desc)); 979 devinfo->data_out_pipe = usb_sndbulkpipe(udev, 980 usb_endpoint_num(&eps[3]->desc)); 981 982 if (udev->speed < USB_SPEED_SUPER) { 983 devinfo->qdepth = 32; 984 devinfo->use_streams = 0; 985 } else { 986 devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1, 987 3, MAX_CMNDS, GFP_NOIO); 988 if (devinfo->qdepth < 0) 989 return devinfo->qdepth; 990 devinfo->use_streams = 1; 991 } 992 993 return 0; 994 } 995 996 static void uas_free_streams(struct uas_dev_info *devinfo) 997 { 998 struct usb_device *udev = devinfo->udev; 999 struct usb_host_endpoint *eps[3]; 1000 1001 eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe); 1002 eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe); 1003 eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe); 1004 usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO); 1005 } 1006 1007 static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) 1008 { 1009 int result = -ENOMEM; 1010 struct Scsi_Host *shost = NULL; 1011 struct uas_dev_info *devinfo; 1012 struct usb_device *udev = interface_to_usbdev(intf); 1013 u64 dev_flags; 1014 1015 if (!uas_use_uas_driver(intf, id, &dev_flags)) 1016 return -ENODEV; 1017 1018 if (uas_switch_interface(udev, intf)) 1019 return -ENODEV; 1020 1021 shost = scsi_host_alloc(&uas_host_template, 1022 sizeof(struct uas_dev_info)); 1023 if (!shost) 1024 goto set_alt0; 1025 1026 shost->max_cmd_len = 16 + 252; 1027 shost->max_id = 1; 1028 shost->max_lun = 256; 1029 shost->max_channel = 0; 1030 shost->sg_tablesize = udev->bus->sg_tablesize; 1031 1032 devinfo = (struct uas_dev_info *)shost->hostdata; 1033 devinfo->intf = intf; 1034 devinfo->udev = udev; 1035 devinfo->resetting = 0; 1036 devinfo->shutdown = 0; 1037 devinfo->flags = dev_flags; 1038 init_usb_anchor(&devinfo->cmd_urbs); 1039 init_usb_anchor(&devinfo->sense_urbs); 1040 init_usb_anchor(&devinfo->data_urbs); 1041 spin_lock_init(&devinfo->lock); 1042 INIT_WORK(&devinfo->work, uas_do_work); 1043 INIT_WORK(&devinfo->scan_work, uas_scan_work); 1044 1045 result = uas_configure_endpoints(devinfo); 1046 if (result) 1047 goto set_alt0; 1048 1049 /* 1050 * 1 tag is reserved for untagged commands + 1051 * 1 tag to avoid off by one errors in some bridge firmwares 1052 */ 1053 shost->can_queue = devinfo->qdepth - 2; 1054 1055 usb_set_intfdata(intf, shost); 1056 result = scsi_add_host(shost, &intf->dev); 1057 if (result) 1058 goto free_streams; 1059 1060 /* Submit the delayed_work for SCSI-device scanning */ 1061 schedule_work(&devinfo->scan_work); 1062 1063 return result; 1064 1065 free_streams: 1066 uas_free_streams(devinfo); 1067 usb_set_intfdata(intf, NULL); 1068 set_alt0: 1069 usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0); 1070 if (shost) 1071 scsi_host_put(shost); 1072 return result; 1073 } 1074 1075 static int uas_cmnd_list_empty(struct uas_dev_info *devinfo) 1076 { 1077 unsigned long flags; 1078 int i, r = 1; 1079 1080 spin_lock_irqsave(&devinfo->lock, flags); 1081 1082 for (i = 0; i < devinfo->qdepth; i++) { 1083 if (devinfo->cmnd[i]) { 1084 r = 0; /* Not empty */ 1085 break; 1086 } 1087 } 1088 1089 spin_unlock_irqrestore(&devinfo->lock, flags); 1090 1091 return r; 1092 } 1093 1094 /* 1095 * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily 1096 * get empty while there still is more work to do due to sense-urbs completing 1097 * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty. 1098 */ 1099 static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo) 1100 { 1101 unsigned long start_time; 1102 int r; 1103 1104 start_time = jiffies; 1105 do { 1106 flush_work(&devinfo->work); 1107 1108 r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000); 1109 if (r == 0) 1110 return -ETIME; 1111 1112 r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500); 1113 if (r == 0) 1114 return -ETIME; 1115 1116 if (time_after(jiffies, start_time + 5 * HZ)) 1117 return -ETIME; 1118 } while (!uas_cmnd_list_empty(devinfo)); 1119 1120 return 0; 1121 } 1122 1123 static int uas_pre_reset(struct usb_interface *intf) 1124 { 1125 struct Scsi_Host *shost = usb_get_intfdata(intf); 1126 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; 1127 unsigned long flags; 1128 1129 if (devinfo->shutdown) 1130 return 0; 1131 1132 /* Block new requests */ 1133 spin_lock_irqsave(shost->host_lock, flags); 1134 scsi_block_requests(shost); 1135 spin_unlock_irqrestore(shost->host_lock, flags); 1136 1137 if (uas_wait_for_pending_cmnds(devinfo) != 0) { 1138 shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); 1139 scsi_unblock_requests(shost); 1140 return 1; 1141 } 1142 1143 uas_free_streams(devinfo); 1144 1145 return 0; 1146 } 1147 1148 static int uas_post_reset(struct usb_interface *intf) 1149 { 1150 struct Scsi_Host *shost = usb_get_intfdata(intf); 1151 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; 1152 unsigned long flags; 1153 int err; 1154 1155 if (devinfo->shutdown) 1156 return 0; 1157 1158 err = uas_configure_endpoints(devinfo); 1159 if (err && err != -ENODEV) 1160 shost_printk(KERN_ERR, shost, 1161 "%s: alloc streams error %d after reset", 1162 __func__, err); 1163 1164 /* we must unblock the host in every case lest we deadlock */ 1165 spin_lock_irqsave(shost->host_lock, flags); 1166 scsi_report_bus_reset(shost, 0); 1167 spin_unlock_irqrestore(shost->host_lock, flags); 1168 1169 scsi_unblock_requests(shost); 1170 1171 return err ? 1 : 0; 1172 } 1173 1174 static int uas_suspend(struct usb_interface *intf, pm_message_t message) 1175 { 1176 struct Scsi_Host *shost = usb_get_intfdata(intf); 1177 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; 1178 1179 if (uas_wait_for_pending_cmnds(devinfo) != 0) { 1180 shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); 1181 return -ETIME; 1182 } 1183 1184 return 0; 1185 } 1186 1187 static int uas_resume(struct usb_interface *intf) 1188 { 1189 return 0; 1190 } 1191 1192 static int uas_reset_resume(struct usb_interface *intf) 1193 { 1194 struct Scsi_Host *shost = usb_get_intfdata(intf); 1195 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; 1196 unsigned long flags; 1197 int err; 1198 1199 err = uas_configure_endpoints(devinfo); 1200 if (err) { 1201 shost_printk(KERN_ERR, shost, 1202 "%s: alloc streams error %d after reset", 1203 __func__, err); 1204 return -EIO; 1205 } 1206 1207 spin_lock_irqsave(shost->host_lock, flags); 1208 scsi_report_bus_reset(shost, 0); 1209 spin_unlock_irqrestore(shost->host_lock, flags); 1210 1211 return 0; 1212 } 1213 1214 static void uas_disconnect(struct usb_interface *intf) 1215 { 1216 struct Scsi_Host *shost = usb_get_intfdata(intf); 1217 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; 1218 unsigned long flags; 1219 1220 spin_lock_irqsave(&devinfo->lock, flags); 1221 devinfo->resetting = 1; 1222 spin_unlock_irqrestore(&devinfo->lock, flags); 1223 1224 cancel_work_sync(&devinfo->work); 1225 usb_kill_anchored_urbs(&devinfo->cmd_urbs); 1226 usb_kill_anchored_urbs(&devinfo->sense_urbs); 1227 usb_kill_anchored_urbs(&devinfo->data_urbs); 1228 uas_zap_pending(devinfo, DID_NO_CONNECT); 1229 1230 /* 1231 * Prevent SCSI scanning (if it hasn't started yet) 1232 * or wait for the SCSI-scanning routine to stop. 1233 */ 1234 cancel_work_sync(&devinfo->scan_work); 1235 1236 scsi_remove_host(shost); 1237 uas_free_streams(devinfo); 1238 scsi_host_put(shost); 1239 } 1240 1241 /* 1242 * Put the device back in usb-storage mode on shutdown, as some BIOS-es 1243 * hang on reboot when the device is still in uas mode. Note the reset is 1244 * necessary as some devices won't revert to usb-storage mode without it. 1245 */ 1246 static void uas_shutdown(struct usb_interface *intf) 1247 { 1248 struct usb_device *udev = interface_to_usbdev(intf); 1249 struct Scsi_Host *shost = usb_get_intfdata(intf); 1250 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; 1251 1252 if (system_state != SYSTEM_RESTART) 1253 return; 1254 1255 devinfo->shutdown = 1; 1256 uas_free_streams(devinfo); 1257 usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0); 1258 usb_reset_device(udev); 1259 } 1260 1261 static struct usb_driver uas_driver = { 1262 .name = "uas", 1263 .probe = uas_probe, 1264 .disconnect = uas_disconnect, 1265 .pre_reset = uas_pre_reset, 1266 .post_reset = uas_post_reset, 1267 .suspend = uas_suspend, 1268 .resume = uas_resume, 1269 .reset_resume = uas_reset_resume, 1270 .shutdown = uas_shutdown, 1271 .id_table = uas_usb_ids, 1272 }; 1273 1274 static int __init uas_init(void) 1275 { 1276 int rv; 1277 1278 workqueue = alloc_workqueue("uas", WQ_MEM_RECLAIM | WQ_PERCPU, 0); 1279 if (!workqueue) 1280 return -ENOMEM; 1281 1282 rv = usb_register(&uas_driver); 1283 if (rv) { 1284 destroy_workqueue(workqueue); 1285 return -ENOMEM; 1286 } 1287 1288 return 0; 1289 } 1290 1291 static void __exit uas_exit(void) 1292 { 1293 usb_deregister(&uas_driver); 1294 destroy_workqueue(workqueue); 1295 } 1296 1297 module_init(uas_init); 1298 module_exit(uas_exit); 1299 1300 MODULE_DESCRIPTION("USB Attached SCSI driver"); 1301 MODULE_LICENSE("GPL"); 1302 MODULE_IMPORT_NS("USB_STORAGE"); 1303 MODULE_AUTHOR( 1304 "Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp"); 1305