xref: /linux/drivers/usb/storage/uas.c (revision af8e51644a70f612974a6e767fa7d896d3c23f88)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * USB Attached SCSI
4  * Note that this is not the same as the USB Mass Storage driver
5  *
6  * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016
7  * Copyright Matthew Wilcox for Intel Corp, 2010
8  * Copyright Sarah Sharp for Intel Corp, 2010
9  */
10 
11 #include <linux/blkdev.h>
12 #include <linux/slab.h>
13 #include <linux/types.h>
14 #include <linux/module.h>
15 #include <linux/usb.h>
16 #include <linux/usb_usual.h>
17 #include <linux/usb/hcd.h>
18 #include <linux/usb/storage.h>
19 #include <linux/usb/uas.h>
20 
21 #include <scsi/scsi.h>
22 #include <scsi/scsi_eh.h>
23 #include <scsi/scsi_dbg.h>
24 #include <scsi/scsi_cmnd.h>
25 #include <scsi/scsi_device.h>
26 #include <scsi/scsi_host.h>
27 #include <scsi/scsi_tcq.h>
28 
29 #include "uas-detect.h"
30 #include "scsiglue.h"
31 
32 #define MAX_CMNDS 256
33 
34 struct uas_dev_info {
35 	struct usb_interface *intf;
36 	struct usb_device *udev;
37 	struct usb_anchor cmd_urbs;
38 	struct usb_anchor sense_urbs;
39 	struct usb_anchor data_urbs;
40 	u64 flags;
41 	int qdepth, resetting;
42 	unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
43 	unsigned use_streams:1;
44 	unsigned shutdown:1;
45 	struct scsi_cmnd *cmnd[MAX_CMNDS];
46 	spinlock_t lock;
47 	struct work_struct work;
48 	struct work_struct scan_work;      /* for async scanning */
49 };
50 
51 enum {
52 	SUBMIT_STATUS_URB	= BIT(1),
53 	ALLOC_DATA_IN_URB	= BIT(2),
54 	SUBMIT_DATA_IN_URB	= BIT(3),
55 	ALLOC_DATA_OUT_URB	= BIT(4),
56 	SUBMIT_DATA_OUT_URB	= BIT(5),
57 	ALLOC_CMD_URB		= BIT(6),
58 	SUBMIT_CMD_URB		= BIT(7),
59 	COMMAND_INFLIGHT        = BIT(8),
60 	DATA_IN_URB_INFLIGHT    = BIT(9),
61 	DATA_OUT_URB_INFLIGHT   = BIT(10),
62 	COMMAND_ABORTED         = BIT(11),
63 	IS_IN_WORK_LIST         = BIT(12),
64 };
65 
66 /* Overrides scsi_pointer */
67 struct uas_cmd_info {
68 	unsigned int state;
69 	unsigned int uas_tag;
70 	struct urb *cmd_urb;
71 	struct urb *data_in_urb;
72 	struct urb *data_out_urb;
73 };
74 
75 /* I hate forward declarations, but I actually have a loop */
76 static int uas_submit_urbs(struct scsi_cmnd *cmnd,
77 				struct uas_dev_info *devinfo);
78 static void uas_do_work(struct work_struct *work);
79 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller);
80 static void uas_free_streams(struct uas_dev_info *devinfo);
81 static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
82 				int status);
83 
84 /*
85  * This driver needs its own workqueue, as we need to control memory allocation.
86  *
87  * In the course of error handling and power management uas_wait_for_pending_cmnds()
88  * needs to flush pending work items. In these contexts we cannot allocate memory
89  * by doing block IO as we would deadlock. For the same reason we cannot wait
90  * for anything allocating memory not heeding these constraints.
91  *
92  * So we have to control all work items that can be on the workqueue we flush.
93  * Hence we cannot share a queue and need our own.
94  */
95 static struct workqueue_struct *workqueue;
96 
97 static void uas_do_work(struct work_struct *work)
98 {
99 	struct uas_dev_info *devinfo =
100 		container_of(work, struct uas_dev_info, work);
101 	struct uas_cmd_info *cmdinfo;
102 	struct scsi_cmnd *cmnd;
103 	unsigned long flags;
104 	int i, err;
105 
106 	spin_lock_irqsave(&devinfo->lock, flags);
107 
108 	if (devinfo->resetting)
109 		goto out;
110 
111 	for (i = 0; i < devinfo->qdepth; i++) {
112 		if (!devinfo->cmnd[i])
113 			continue;
114 
115 		cmnd = devinfo->cmnd[i];
116 		cmdinfo = scsi_cmd_priv(cmnd);
117 
118 		if (!(cmdinfo->state & IS_IN_WORK_LIST))
119 			continue;
120 
121 		err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
122 		if (!err)
123 			cmdinfo->state &= ~IS_IN_WORK_LIST;
124 		else
125 			queue_work(workqueue, &devinfo->work);
126 	}
127 out:
128 	spin_unlock_irqrestore(&devinfo->lock, flags);
129 }
130 
131 static void uas_scan_work(struct work_struct *work)
132 {
133 	struct uas_dev_info *devinfo =
134 		container_of(work, struct uas_dev_info, scan_work);
135 	struct Scsi_Host *shost = usb_get_intfdata(devinfo->intf);
136 
137 	dev_dbg(&devinfo->intf->dev, "starting scan\n");
138 	scsi_scan_host(shost);
139 	dev_dbg(&devinfo->intf->dev, "scan complete\n");
140 }
141 
142 static void uas_add_work(struct scsi_cmnd *cmnd)
143 {
144 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
145 	struct uas_dev_info *devinfo = cmnd->device->hostdata;
146 
147 	lockdep_assert_held(&devinfo->lock);
148 	cmdinfo->state |= IS_IN_WORK_LIST;
149 	queue_work(workqueue, &devinfo->work);
150 }
151 
152 static void uas_zap_pending(struct uas_dev_info *devinfo, int result)
153 {
154 	struct uas_cmd_info *cmdinfo;
155 	struct scsi_cmnd *cmnd;
156 	unsigned long flags;
157 	int i, err;
158 
159 	spin_lock_irqsave(&devinfo->lock, flags);
160 	for (i = 0; i < devinfo->qdepth; i++) {
161 		if (!devinfo->cmnd[i])
162 			continue;
163 
164 		cmnd = devinfo->cmnd[i];
165 		cmdinfo = scsi_cmd_priv(cmnd);
166 		uas_log_cmd_state(cmnd, __func__, 0);
167 		/* Sense urbs were killed, clear COMMAND_INFLIGHT manually */
168 		cmdinfo->state &= ~COMMAND_INFLIGHT;
169 		cmnd->result = result << 16;
170 		err = uas_try_complete(cmnd, __func__);
171 		WARN_ON(err != 0);
172 	}
173 	spin_unlock_irqrestore(&devinfo->lock, flags);
174 }
175 
176 static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
177 {
178 	struct sense_iu *sense_iu = urb->transfer_buffer;
179 	struct scsi_device *sdev = cmnd->device;
180 
181 	if (urb->actual_length > 16) {
182 		unsigned len = be16_to_cpup(&sense_iu->len);
183 		if (len + 16 != urb->actual_length) {
184 			int newlen = min(len + 16, urb->actual_length) - 16;
185 			if (newlen < 0)
186 				newlen = 0;
187 			sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
188 				"disagrees with IU sense data length %d, "
189 				"using %d bytes of sense data\n", __func__,
190 					urb->actual_length, len, newlen);
191 			len = newlen;
192 		}
193 		memcpy(cmnd->sense_buffer, sense_iu->sense, len);
194 	}
195 
196 	cmnd->result = sense_iu->status;
197 }
198 
199 static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
200 			      int status)
201 {
202 	struct uas_cmd_info *ci = scsi_cmd_priv(cmnd);
203 
204 	if (status == -ENODEV) /* too late */
205 		return;
206 
207 	scmd_printk(KERN_INFO, cmnd,
208 		    "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ",
209 		    prefix, status, ci->uas_tag,
210 		    (ci->state & SUBMIT_STATUS_URB)     ? " s-st"  : "",
211 		    (ci->state & ALLOC_DATA_IN_URB)     ? " a-in"  : "",
212 		    (ci->state & SUBMIT_DATA_IN_URB)    ? " s-in"  : "",
213 		    (ci->state & ALLOC_DATA_OUT_URB)    ? " a-out" : "",
214 		    (ci->state & SUBMIT_DATA_OUT_URB)   ? " s-out" : "",
215 		    (ci->state & ALLOC_CMD_URB)         ? " a-cmd" : "",
216 		    (ci->state & SUBMIT_CMD_URB)        ? " s-cmd" : "",
217 		    (ci->state & COMMAND_INFLIGHT)      ? " CMD"   : "",
218 		    (ci->state & DATA_IN_URB_INFLIGHT)  ? " IN"    : "",
219 		    (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT"   : "",
220 		    (ci->state & COMMAND_ABORTED)       ? " abort" : "",
221 		    (ci->state & IS_IN_WORK_LIST)       ? " work"  : "");
222 	scsi_print_command(cmnd);
223 }
224 
225 static void uas_free_unsubmitted_urbs(struct scsi_cmnd *cmnd)
226 {
227 	struct uas_cmd_info *cmdinfo;
228 
229 	if (!cmnd)
230 		return;
231 
232 	cmdinfo = scsi_cmd_priv(cmnd);
233 
234 	if (cmdinfo->state & SUBMIT_CMD_URB)
235 		usb_free_urb(cmdinfo->cmd_urb);
236 
237 	/* data urbs may have never gotten their submit flag set */
238 	if (!(cmdinfo->state & DATA_IN_URB_INFLIGHT))
239 		usb_free_urb(cmdinfo->data_in_urb);
240 	if (!(cmdinfo->state & DATA_OUT_URB_INFLIGHT))
241 		usb_free_urb(cmdinfo->data_out_urb);
242 }
243 
244 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller)
245 {
246 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
247 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
248 
249 	lockdep_assert_held(&devinfo->lock);
250 	if (cmdinfo->state & (COMMAND_INFLIGHT |
251 			      DATA_IN_URB_INFLIGHT |
252 			      DATA_OUT_URB_INFLIGHT |
253 			      COMMAND_ABORTED))
254 		return -EBUSY;
255 	devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
256 	uas_free_unsubmitted_urbs(cmnd);
257 	scsi_done(cmnd);
258 	return 0;
259 }
260 
261 static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
262 			  unsigned direction)
263 {
264 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
265 	int err;
266 
267 	cmdinfo->state |= direction | SUBMIT_STATUS_URB;
268 	err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
269 	if (err) {
270 		uas_add_work(cmnd);
271 	}
272 }
273 
274 static bool uas_evaluate_response_iu(struct response_iu *riu, struct scsi_cmnd *cmnd)
275 {
276 	u8 response_code = riu->response_code;
277 
278 	switch (response_code) {
279 	case RC_INCORRECT_LUN:
280 		set_host_byte(cmnd, DID_BAD_TARGET);
281 		break;
282 	case RC_TMF_SUCCEEDED:
283 		set_host_byte(cmnd, DID_OK);
284 		break;
285 	case RC_TMF_NOT_SUPPORTED:
286 		set_host_byte(cmnd, DID_BAD_TARGET);
287 		break;
288 	default:
289 		uas_log_cmd_state(cmnd, "response iu", response_code);
290 		set_host_byte(cmnd, DID_ERROR);
291 		break;
292 	}
293 
294 	return response_code == RC_TMF_SUCCEEDED;
295 }
296 
297 static void uas_stat_cmplt(struct urb *urb)
298 {
299 	struct iu *iu = urb->transfer_buffer;
300 	struct Scsi_Host *shost = urb->context;
301 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
302 	struct urb *data_in_urb = NULL;
303 	struct urb *data_out_urb = NULL;
304 	struct scsi_cmnd *cmnd;
305 	struct uas_cmd_info *cmdinfo;
306 	unsigned long flags;
307 	unsigned int idx;
308 	int status = urb->status;
309 	bool success;
310 
311 	spin_lock_irqsave(&devinfo->lock, flags);
312 
313 	if (devinfo->resetting)
314 		goto out;
315 
316 	if (status) {
317 		if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
318 			dev_err(&urb->dev->dev, "stat urb: status %d\n", status);
319 		goto out;
320 	}
321 
322 	idx = be16_to_cpup(&iu->tag) - 1;
323 	if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) {
324 		dev_err(&urb->dev->dev,
325 			"stat urb: no pending cmd for uas-tag %d\n", idx + 1);
326 		goto out;
327 	}
328 
329 	cmnd = devinfo->cmnd[idx];
330 	cmdinfo = scsi_cmd_priv(cmnd);
331 
332 	if (!(cmdinfo->state & COMMAND_INFLIGHT)) {
333 		uas_log_cmd_state(cmnd, "unexpected status cmplt", 0);
334 		goto out;
335 	}
336 
337 	switch (iu->iu_id) {
338 	case IU_ID_STATUS:
339 		uas_sense(urb, cmnd);
340 		if (cmnd->result != 0) {
341 			/* cancel data transfers on error */
342 			data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
343 			data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
344 		}
345 		cmdinfo->state &= ~COMMAND_INFLIGHT;
346 		uas_try_complete(cmnd, __func__);
347 		break;
348 	case IU_ID_READ_READY:
349 		if (!cmdinfo->data_in_urb ||
350 				(cmdinfo->state & DATA_IN_URB_INFLIGHT)) {
351 			uas_log_cmd_state(cmnd, "unexpected read rdy", 0);
352 			break;
353 		}
354 		uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB);
355 		break;
356 	case IU_ID_WRITE_READY:
357 		if (!cmdinfo->data_out_urb ||
358 				(cmdinfo->state & DATA_OUT_URB_INFLIGHT)) {
359 			uas_log_cmd_state(cmnd, "unexpected write rdy", 0);
360 			break;
361 		}
362 		uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB);
363 		break;
364 	case IU_ID_RESPONSE:
365 		cmdinfo->state &= ~COMMAND_INFLIGHT;
366 		success = uas_evaluate_response_iu((struct response_iu *)iu, cmnd);
367 		if (!success) {
368 			/* Error, cancel data transfers */
369 			data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
370 			data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
371 		}
372 		uas_try_complete(cmnd, __func__);
373 		break;
374 	default:
375 		uas_log_cmd_state(cmnd, "bogus IU", iu->iu_id);
376 	}
377 out:
378 	usb_free_urb(urb);
379 	spin_unlock_irqrestore(&devinfo->lock, flags);
380 
381 	/* Unlinking of data urbs must be done without holding the lock */
382 	if (data_in_urb) {
383 		usb_unlink_urb(data_in_urb);
384 		usb_put_urb(data_in_urb);
385 	}
386 	if (data_out_urb) {
387 		usb_unlink_urb(data_out_urb);
388 		usb_put_urb(data_out_urb);
389 	}
390 }
391 
392 static void uas_data_cmplt(struct urb *urb)
393 {
394 	struct scsi_cmnd *cmnd = urb->context;
395 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
396 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
397 	struct scsi_data_buffer *sdb = &cmnd->sdb;
398 	unsigned long flags;
399 	int status = urb->status;
400 
401 	spin_lock_irqsave(&devinfo->lock, flags);
402 
403 	if (cmdinfo->data_in_urb == urb) {
404 		cmdinfo->state &= ~DATA_IN_URB_INFLIGHT;
405 		cmdinfo->data_in_urb = NULL;
406 	} else if (cmdinfo->data_out_urb == urb) {
407 		cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT;
408 		cmdinfo->data_out_urb = NULL;
409 	}
410 
411 	if (devinfo->resetting)
412 		goto out;
413 
414 	/* Data urbs should not complete before the cmd urb is submitted */
415 	if (cmdinfo->state & SUBMIT_CMD_URB) {
416 		uas_log_cmd_state(cmnd, "unexpected data cmplt", 0);
417 		goto out;
418 	}
419 
420 	if (status) {
421 		if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
422 			uas_log_cmd_state(cmnd, "data cmplt err", status);
423 		/* error: no data transfered */
424 		scsi_set_resid(cmnd, sdb->length);
425 	} else {
426 		scsi_set_resid(cmnd, sdb->length - urb->actual_length);
427 	}
428 	uas_try_complete(cmnd, __func__);
429 out:
430 	usb_free_urb(urb);
431 	spin_unlock_irqrestore(&devinfo->lock, flags);
432 }
433 
434 static void uas_cmd_cmplt(struct urb *urb)
435 {
436 	if (urb->status)
437 		dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status);
438 
439 	usb_free_urb(urb);
440 }
441 
442 static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
443 				      struct scsi_cmnd *cmnd,
444 				      enum dma_data_direction dir)
445 {
446 	struct usb_device *udev = devinfo->udev;
447 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
448 	struct urb *urb = usb_alloc_urb(0, gfp);
449 	struct scsi_data_buffer *sdb = &cmnd->sdb;
450 	unsigned int pipe = (dir == DMA_FROM_DEVICE)
451 		? devinfo->data_in_pipe : devinfo->data_out_pipe;
452 
453 	if (!urb)
454 		goto out;
455 	usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length,
456 			  uas_data_cmplt, cmnd);
457 	if (devinfo->use_streams)
458 		urb->stream_id = cmdinfo->uas_tag;
459 	urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
460 	urb->sg = sdb->table.sgl;
461  out:
462 	return urb;
463 }
464 
465 static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
466 				       struct scsi_cmnd *cmnd)
467 {
468 	struct usb_device *udev = devinfo->udev;
469 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
470 	struct urb *urb = usb_alloc_urb(0, gfp);
471 	struct sense_iu *iu;
472 
473 	if (!urb)
474 		goto out;
475 
476 	iu = kzalloc(sizeof(*iu), gfp);
477 	if (!iu)
478 		goto free;
479 
480 	usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
481 			  uas_stat_cmplt, cmnd->device->host);
482 	if (devinfo->use_streams)
483 		urb->stream_id = cmdinfo->uas_tag;
484 	urb->transfer_flags |= URB_FREE_BUFFER;
485  out:
486 	return urb;
487  free:
488 	usb_free_urb(urb);
489 	return NULL;
490 }
491 
492 static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
493 					struct scsi_cmnd *cmnd)
494 {
495 	struct usb_device *udev = devinfo->udev;
496 	struct scsi_device *sdev = cmnd->device;
497 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
498 	struct urb *urb = usb_alloc_urb(0, gfp);
499 	struct command_iu *iu;
500 	int len;
501 
502 	if (!urb)
503 		goto out;
504 
505 	len = cmnd->cmd_len - 16;
506 	if (len < 0)
507 		len = 0;
508 	len = ALIGN(len, 4);
509 	iu = kzalloc(sizeof(*iu) + len, gfp);
510 	if (!iu)
511 		goto free;
512 
513 	iu->iu_id = IU_ID_COMMAND;
514 	iu->tag = cpu_to_be16(cmdinfo->uas_tag);
515 	iu->prio_attr = UAS_SIMPLE_TAG;
516 	iu->len = len;
517 	int_to_scsilun(sdev->lun, &iu->lun);
518 	memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
519 
520 	usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len,
521 							uas_cmd_cmplt, NULL);
522 	urb->transfer_flags |= URB_FREE_BUFFER;
523  out:
524 	return urb;
525  free:
526 	usb_free_urb(urb);
527 	return NULL;
528 }
529 
530 /*
531  * Why should I request the Status IU before sending the Command IU?  Spec
532  * says to, but also says the device may receive them in any order.  Seems
533  * daft to me.
534  */
535 
536 static int uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp)
537 {
538 	struct uas_dev_info *devinfo = cmnd->device->hostdata;
539 	struct urb *urb;
540 	int err;
541 
542 	urb = uas_alloc_sense_urb(devinfo, gfp, cmnd);
543 	if (!urb)
544 		return -ENOMEM;
545 	usb_anchor_urb(urb, &devinfo->sense_urbs);
546 	err = usb_submit_urb(urb, gfp);
547 	if (err) {
548 		usb_unanchor_urb(urb);
549 		uas_log_cmd_state(cmnd, "sense submit err", err);
550 		usb_free_urb(urb);
551 	}
552 	return err;
553 }
554 
555 static int uas_submit_urbs(struct scsi_cmnd *cmnd,
556 			   struct uas_dev_info *devinfo)
557 {
558 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
559 	int err;
560 
561 	lockdep_assert_held(&devinfo->lock);
562 	if (cmdinfo->state & SUBMIT_STATUS_URB) {
563 		err = uas_submit_sense_urb(cmnd, GFP_ATOMIC);
564 		if (err)
565 			return err;
566 		cmdinfo->state &= ~SUBMIT_STATUS_URB;
567 	}
568 
569 	if (cmdinfo->state & ALLOC_DATA_IN_URB) {
570 		cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
571 							cmnd, DMA_FROM_DEVICE);
572 		if (!cmdinfo->data_in_urb)
573 			return -ENOMEM;
574 		cmdinfo->state &= ~ALLOC_DATA_IN_URB;
575 	}
576 
577 	if (cmdinfo->state & SUBMIT_DATA_IN_URB) {
578 		usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs);
579 		err = usb_submit_urb(cmdinfo->data_in_urb, GFP_ATOMIC);
580 		if (err) {
581 			usb_unanchor_urb(cmdinfo->data_in_urb);
582 			uas_log_cmd_state(cmnd, "data in submit err", err);
583 			return err;
584 		}
585 		cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
586 		cmdinfo->state |= DATA_IN_URB_INFLIGHT;
587 	}
588 
589 	if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
590 		cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
591 							cmnd, DMA_TO_DEVICE);
592 		if (!cmdinfo->data_out_urb)
593 			return -ENOMEM;
594 		cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
595 	}
596 
597 	if (cmdinfo->state & SUBMIT_DATA_OUT_URB) {
598 		usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs);
599 		err = usb_submit_urb(cmdinfo->data_out_urb, GFP_ATOMIC);
600 		if (err) {
601 			usb_unanchor_urb(cmdinfo->data_out_urb);
602 			uas_log_cmd_state(cmnd, "data out submit err", err);
603 			return err;
604 		}
605 		cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
606 		cmdinfo->state |= DATA_OUT_URB_INFLIGHT;
607 	}
608 
609 	if (cmdinfo->state & ALLOC_CMD_URB) {
610 		cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd);
611 		if (!cmdinfo->cmd_urb)
612 			return -ENOMEM;
613 		cmdinfo->state &= ~ALLOC_CMD_URB;
614 	}
615 
616 	if (cmdinfo->state & SUBMIT_CMD_URB) {
617 		usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs);
618 		err = usb_submit_urb(cmdinfo->cmd_urb, GFP_ATOMIC);
619 		if (err) {
620 			usb_unanchor_urb(cmdinfo->cmd_urb);
621 			uas_log_cmd_state(cmnd, "cmd submit err", err);
622 			return err;
623 		}
624 		cmdinfo->cmd_urb = NULL;
625 		cmdinfo->state &= ~SUBMIT_CMD_URB;
626 		cmdinfo->state |= COMMAND_INFLIGHT;
627 	}
628 
629 	return 0;
630 }
631 
632 static int uas_queuecommand_lck(struct scsi_cmnd *cmnd)
633 {
634 	struct scsi_device *sdev = cmnd->device;
635 	struct uas_dev_info *devinfo = sdev->hostdata;
636 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
637 	unsigned long flags;
638 	int idx, err;
639 
640 	/* Re-check scsi_block_requests now that we've the host-lock */
641 	if (cmnd->device->host->host_self_blocked)
642 		return SCSI_MLQUEUE_DEVICE_BUSY;
643 
644 	if ((devinfo->flags & US_FL_NO_ATA_1X) &&
645 			(cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) {
646 		memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB,
647 		       sizeof(usb_stor_sense_invalidCDB));
648 		cmnd->result = SAM_STAT_CHECK_CONDITION;
649 		scsi_done(cmnd);
650 		return 0;
651 	}
652 
653 	spin_lock_irqsave(&devinfo->lock, flags);
654 
655 	if (devinfo->resetting) {
656 		set_host_byte(cmnd, DID_ERROR);
657 		scsi_done(cmnd);
658 		goto zombie;
659 	}
660 
661 	/* Find a free uas-tag */
662 	for (idx = 0; idx < devinfo->qdepth; idx++) {
663 		if (!devinfo->cmnd[idx])
664 			break;
665 	}
666 	if (idx == devinfo->qdepth) {
667 		spin_unlock_irqrestore(&devinfo->lock, flags);
668 		return SCSI_MLQUEUE_DEVICE_BUSY;
669 	}
670 
671 	memset(cmdinfo, 0, sizeof(*cmdinfo));
672 	cmdinfo->uas_tag = idx + 1; /* uas-tag == usb-stream-id, so 1 based */
673 	cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB;
674 
675 	switch (cmnd->sc_data_direction) {
676 	case DMA_FROM_DEVICE:
677 		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
678 		break;
679 	case DMA_BIDIRECTIONAL:
680 		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
681 		fallthrough;
682 	case DMA_TO_DEVICE:
683 		cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB;
684 		break;
685 	case DMA_NONE:
686 		break;
687 	}
688 
689 	if (!devinfo->use_streams)
690 		cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
691 
692 	err = uas_submit_urbs(cmnd, devinfo);
693 	/*
694 	 * in case of fatal errors the SCSI layer is peculiar
695 	 * a command that has finished is a success for the purpose
696 	 * of queueing, no matter how fatal the error
697 	 */
698 	if (err == -ENODEV) {
699 		set_host_byte(cmnd, DID_NO_CONNECT);
700 		scsi_done(cmnd);
701 		goto zombie;
702 	}
703 	if (err) {
704 		/* If we did nothing, give up now */
705 		if (cmdinfo->state & SUBMIT_STATUS_URB) {
706 			spin_unlock_irqrestore(&devinfo->lock, flags);
707 			return SCSI_MLQUEUE_DEVICE_BUSY;
708 		}
709 		uas_add_work(cmnd);
710 	}
711 
712 	devinfo->cmnd[idx] = cmnd;
713 zombie:
714 	spin_unlock_irqrestore(&devinfo->lock, flags);
715 	return 0;
716 }
717 
718 static DEF_SCSI_QCMD(uas_queuecommand)
719 
720 /*
721  * For now we do not support actually sending an abort to the device, so
722  * this eh always fails. Still we must define it to make sure that we've
723  * dropped all references to the cmnd in question once this function exits.
724  */
725 static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
726 {
727 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
728 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
729 	struct urb *data_in_urb = NULL;
730 	struct urb *data_out_urb = NULL;
731 	unsigned long flags;
732 
733 	spin_lock_irqsave(&devinfo->lock, flags);
734 
735 	uas_log_cmd_state(cmnd, __func__, 0);
736 
737 	/* Ensure that try_complete does not call scsi_done */
738 	cmdinfo->state |= COMMAND_ABORTED;
739 
740 	/* Drop all refs to this cmnd, kill data urbs to break their ref */
741 	devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
742 	if (cmdinfo->state & DATA_IN_URB_INFLIGHT)
743 		data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
744 	if (cmdinfo->state & DATA_OUT_URB_INFLIGHT)
745 		data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
746 
747 	uas_free_unsubmitted_urbs(cmnd);
748 
749 	spin_unlock_irqrestore(&devinfo->lock, flags);
750 
751 	if (data_in_urb) {
752 		usb_kill_urb(data_in_urb);
753 		usb_put_urb(data_in_urb);
754 	}
755 	if (data_out_urb) {
756 		usb_kill_urb(data_out_urb);
757 		usb_put_urb(data_out_urb);
758 	}
759 
760 	return FAILED;
761 }
762 
763 static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd)
764 {
765 	struct scsi_device *sdev = cmnd->device;
766 	struct uas_dev_info *devinfo = sdev->hostdata;
767 	struct usb_device *udev = devinfo->udev;
768 	unsigned long flags;
769 	int err;
770 
771 	err = usb_lock_device_for_reset(udev, devinfo->intf);
772 	if (err) {
773 		shost_printk(KERN_ERR, sdev->host,
774 			     "%s FAILED to get lock err %d\n", __func__, err);
775 		return FAILED;
776 	}
777 
778 	shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__);
779 
780 	spin_lock_irqsave(&devinfo->lock, flags);
781 	devinfo->resetting = 1;
782 	spin_unlock_irqrestore(&devinfo->lock, flags);
783 
784 	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
785 	usb_kill_anchored_urbs(&devinfo->sense_urbs);
786 	usb_kill_anchored_urbs(&devinfo->data_urbs);
787 	uas_zap_pending(devinfo, DID_RESET);
788 
789 	err = usb_reset_device(udev);
790 
791 	spin_lock_irqsave(&devinfo->lock, flags);
792 	devinfo->resetting = 0;
793 	spin_unlock_irqrestore(&devinfo->lock, flags);
794 
795 	usb_unlock_device(udev);
796 
797 	if (err) {
798 		shost_printk(KERN_INFO, sdev->host, "%s FAILED err %d\n",
799 			     __func__, err);
800 		return FAILED;
801 	}
802 
803 	shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__);
804 	return SUCCESS;
805 }
806 
807 static int uas_target_alloc(struct scsi_target *starget)
808 {
809 	struct uas_dev_info *devinfo = (struct uas_dev_info *)
810 			dev_to_shost(starget->dev.parent)->hostdata;
811 
812 	if (devinfo->flags & US_FL_NO_REPORT_LUNS)
813 		starget->no_report_luns = 1;
814 
815 	return 0;
816 }
817 
818 static int uas_slave_alloc(struct scsi_device *sdev)
819 {
820 	struct uas_dev_info *devinfo =
821 		(struct uas_dev_info *)sdev->host->hostdata;
822 
823 	sdev->hostdata = devinfo;
824 	return 0;
825 }
826 
827 static int uas_device_configure(struct scsi_device *sdev,
828 		struct queue_limits *lim)
829 {
830 	struct uas_dev_info *devinfo = sdev->hostdata;
831 
832 	if (devinfo->flags & US_FL_MAX_SECTORS_64)
833 		lim->max_hw_sectors = 64;
834 	else if (devinfo->flags & US_FL_MAX_SECTORS_240)
835 		lim->max_hw_sectors = 240;
836 
837 	if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
838 		sdev->no_report_opcodes = 1;
839 
840 	/* A few buggy USB-ATA bridges don't understand FUA */
841 	if (devinfo->flags & US_FL_BROKEN_FUA)
842 		sdev->broken_fua = 1;
843 
844 	/* UAS also needs to support FL_ALWAYS_SYNC */
845 	if (devinfo->flags & US_FL_ALWAYS_SYNC) {
846 		sdev->skip_ms_page_3f = 1;
847 		sdev->skip_ms_page_8 = 1;
848 		sdev->wce_default_on = 1;
849 	}
850 
851 	/* Some disks cannot handle READ_CAPACITY_16 */
852 	if (devinfo->flags & US_FL_NO_READ_CAPACITY_16)
853 		sdev->no_read_capacity_16 = 1;
854 
855 	/* Some disks cannot handle WRITE_SAME */
856 	if (devinfo->flags & US_FL_NO_SAME)
857 		sdev->no_write_same = 1;
858 	/*
859 	 * Some disks return the total number of blocks in response
860 	 * to READ CAPACITY rather than the highest block number.
861 	 * If this device makes that mistake, tell the sd driver.
862 	 */
863 	if (devinfo->flags & US_FL_FIX_CAPACITY)
864 		sdev->fix_capacity = 1;
865 
866 	/*
867 	 * in some cases we have to guess
868 	 */
869 	if (devinfo->flags & US_FL_CAPACITY_HEURISTICS)
870 		sdev->guess_capacity = 1;
871 
872 	/*
873 	 * Some devices report generic values until the media has been
874 	 * accessed. Force a READ(10) prior to querying device
875 	 * characteristics.
876 	 */
877 	sdev->read_before_ms = 1;
878 
879 	/*
880 	 * Some devices don't like MODE SENSE with page=0x3f,
881 	 * which is the command used for checking if a device
882 	 * is write-protected.  Now that we tell the sd driver
883 	 * to do a 192-byte transfer with this command the
884 	 * majority of devices work fine, but a few still can't
885 	 * handle it.  The sd driver will simply assume those
886 	 * devices are write-enabled.
887 	 */
888 	if (devinfo->flags & US_FL_NO_WP_DETECT)
889 		sdev->skip_ms_page_3f = 1;
890 
891 	scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
892 	return 0;
893 }
894 
895 static const struct scsi_host_template uas_host_template = {
896 	.module = THIS_MODULE,
897 	.name = "uas",
898 	.queuecommand = uas_queuecommand,
899 	.target_alloc = uas_target_alloc,
900 	.slave_alloc = uas_slave_alloc,
901 	.device_configure = uas_device_configure,
902 	.eh_abort_handler = uas_eh_abort_handler,
903 	.eh_device_reset_handler = uas_eh_device_reset_handler,
904 	.this_id = -1,
905 	.skip_settle_delay = 1,
906 	/*
907 	 * The protocol has no requirements on alignment in the strict sense.
908 	 * Controllers may or may not have alignment restrictions.
909 	 * As this is not exported, we use an extremely conservative guess.
910 	 */
911 	.dma_alignment = 511,
912 	.dma_boundary = PAGE_SIZE - 1,
913 	.cmd_size = sizeof(struct uas_cmd_info),
914 };
915 
916 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
917 		    vendorName, productName, useProtocol, useTransport, \
918 		    initFunction, flags) \
919 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
920 	.driver_info = (flags) }
921 
922 static struct usb_device_id uas_usb_ids[] = {
923 #	include "unusual_uas.h"
924 	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
925 	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
926 	{ }
927 };
928 MODULE_DEVICE_TABLE(usb, uas_usb_ids);
929 
930 #undef UNUSUAL_DEV
931 
932 static int uas_switch_interface(struct usb_device *udev,
933 				struct usb_interface *intf)
934 {
935 	struct usb_host_interface *alt;
936 
937 	alt = uas_find_uas_alt_setting(intf);
938 	if (!alt)
939 		return -ENODEV;
940 
941 	return usb_set_interface(udev, alt->desc.bInterfaceNumber,
942 			alt->desc.bAlternateSetting);
943 }
944 
945 static int uas_configure_endpoints(struct uas_dev_info *devinfo)
946 {
947 	struct usb_host_endpoint *eps[4] = { };
948 	struct usb_device *udev = devinfo->udev;
949 	int r;
950 
951 	r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps);
952 	if (r)
953 		return r;
954 
955 	devinfo->cmd_pipe = usb_sndbulkpipe(udev,
956 					    usb_endpoint_num(&eps[0]->desc));
957 	devinfo->status_pipe = usb_rcvbulkpipe(udev,
958 					    usb_endpoint_num(&eps[1]->desc));
959 	devinfo->data_in_pipe = usb_rcvbulkpipe(udev,
960 					    usb_endpoint_num(&eps[2]->desc));
961 	devinfo->data_out_pipe = usb_sndbulkpipe(udev,
962 					    usb_endpoint_num(&eps[3]->desc));
963 
964 	if (udev->speed < USB_SPEED_SUPER) {
965 		devinfo->qdepth = 32;
966 		devinfo->use_streams = 0;
967 	} else {
968 		devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1,
969 						    3, MAX_CMNDS, GFP_NOIO);
970 		if (devinfo->qdepth < 0)
971 			return devinfo->qdepth;
972 		devinfo->use_streams = 1;
973 	}
974 
975 	return 0;
976 }
977 
978 static void uas_free_streams(struct uas_dev_info *devinfo)
979 {
980 	struct usb_device *udev = devinfo->udev;
981 	struct usb_host_endpoint *eps[3];
982 
983 	eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
984 	eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
985 	eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
986 	usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO);
987 }
988 
989 static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
990 {
991 	int result = -ENOMEM;
992 	struct Scsi_Host *shost = NULL;
993 	struct uas_dev_info *devinfo;
994 	struct usb_device *udev = interface_to_usbdev(intf);
995 	u64 dev_flags;
996 
997 	if (!uas_use_uas_driver(intf, id, &dev_flags))
998 		return -ENODEV;
999 
1000 	if (uas_switch_interface(udev, intf))
1001 		return -ENODEV;
1002 
1003 	shost = scsi_host_alloc(&uas_host_template,
1004 				sizeof(struct uas_dev_info));
1005 	if (!shost)
1006 		goto set_alt0;
1007 
1008 	shost->max_cmd_len = 16 + 252;
1009 	shost->max_id = 1;
1010 	shost->max_lun = 256;
1011 	shost->max_channel = 0;
1012 	shost->sg_tablesize = udev->bus->sg_tablesize;
1013 
1014 	devinfo = (struct uas_dev_info *)shost->hostdata;
1015 	devinfo->intf = intf;
1016 	devinfo->udev = udev;
1017 	devinfo->resetting = 0;
1018 	devinfo->shutdown = 0;
1019 	devinfo->flags = dev_flags;
1020 	init_usb_anchor(&devinfo->cmd_urbs);
1021 	init_usb_anchor(&devinfo->sense_urbs);
1022 	init_usb_anchor(&devinfo->data_urbs);
1023 	spin_lock_init(&devinfo->lock);
1024 	INIT_WORK(&devinfo->work, uas_do_work);
1025 	INIT_WORK(&devinfo->scan_work, uas_scan_work);
1026 
1027 	result = uas_configure_endpoints(devinfo);
1028 	if (result)
1029 		goto set_alt0;
1030 
1031 	/*
1032 	 * 1 tag is reserved for untagged commands +
1033 	 * 1 tag to avoid off by one errors in some bridge firmwares
1034 	 */
1035 	shost->can_queue = devinfo->qdepth - 2;
1036 
1037 	usb_set_intfdata(intf, shost);
1038 	result = scsi_add_host(shost, &intf->dev);
1039 	if (result)
1040 		goto free_streams;
1041 
1042 	/* Submit the delayed_work for SCSI-device scanning */
1043 	schedule_work(&devinfo->scan_work);
1044 
1045 	return result;
1046 
1047 free_streams:
1048 	uas_free_streams(devinfo);
1049 	usb_set_intfdata(intf, NULL);
1050 set_alt0:
1051 	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
1052 	if (shost)
1053 		scsi_host_put(shost);
1054 	return result;
1055 }
1056 
1057 static int uas_cmnd_list_empty(struct uas_dev_info *devinfo)
1058 {
1059 	unsigned long flags;
1060 	int i, r = 1;
1061 
1062 	spin_lock_irqsave(&devinfo->lock, flags);
1063 
1064 	for (i = 0; i < devinfo->qdepth; i++) {
1065 		if (devinfo->cmnd[i]) {
1066 			r = 0; /* Not empty */
1067 			break;
1068 		}
1069 	}
1070 
1071 	spin_unlock_irqrestore(&devinfo->lock, flags);
1072 
1073 	return r;
1074 }
1075 
1076 /*
1077  * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily
1078  * get empty while there still is more work to do due to sense-urbs completing
1079  * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty.
1080  */
1081 static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo)
1082 {
1083 	unsigned long start_time;
1084 	int r;
1085 
1086 	start_time = jiffies;
1087 	do {
1088 		flush_work(&devinfo->work);
1089 
1090 		r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000);
1091 		if (r == 0)
1092 			return -ETIME;
1093 
1094 		r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500);
1095 		if (r == 0)
1096 			return -ETIME;
1097 
1098 		if (time_after(jiffies, start_time + 5 * HZ))
1099 			return -ETIME;
1100 	} while (!uas_cmnd_list_empty(devinfo));
1101 
1102 	return 0;
1103 }
1104 
1105 static int uas_pre_reset(struct usb_interface *intf)
1106 {
1107 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1108 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1109 	unsigned long flags;
1110 
1111 	if (devinfo->shutdown)
1112 		return 0;
1113 
1114 	/* Block new requests */
1115 	spin_lock_irqsave(shost->host_lock, flags);
1116 	scsi_block_requests(shost);
1117 	spin_unlock_irqrestore(shost->host_lock, flags);
1118 
1119 	if (uas_wait_for_pending_cmnds(devinfo) != 0) {
1120 		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
1121 		scsi_unblock_requests(shost);
1122 		return 1;
1123 	}
1124 
1125 	uas_free_streams(devinfo);
1126 
1127 	return 0;
1128 }
1129 
1130 static int uas_post_reset(struct usb_interface *intf)
1131 {
1132 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1133 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1134 	unsigned long flags;
1135 	int err;
1136 
1137 	if (devinfo->shutdown)
1138 		return 0;
1139 
1140 	err = uas_configure_endpoints(devinfo);
1141 	if (err && err != -ENODEV)
1142 		shost_printk(KERN_ERR, shost,
1143 			     "%s: alloc streams error %d after reset",
1144 			     __func__, err);
1145 
1146 	/* we must unblock the host in every case lest we deadlock */
1147 	spin_lock_irqsave(shost->host_lock, flags);
1148 	scsi_report_bus_reset(shost, 0);
1149 	spin_unlock_irqrestore(shost->host_lock, flags);
1150 
1151 	scsi_unblock_requests(shost);
1152 
1153 	return err ? 1 : 0;
1154 }
1155 
1156 static int uas_suspend(struct usb_interface *intf, pm_message_t message)
1157 {
1158 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1159 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1160 
1161 	if (uas_wait_for_pending_cmnds(devinfo) != 0) {
1162 		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
1163 		return -ETIME;
1164 	}
1165 
1166 	return 0;
1167 }
1168 
1169 static int uas_resume(struct usb_interface *intf)
1170 {
1171 	return 0;
1172 }
1173 
1174 static int uas_reset_resume(struct usb_interface *intf)
1175 {
1176 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1177 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1178 	unsigned long flags;
1179 	int err;
1180 
1181 	err = uas_configure_endpoints(devinfo);
1182 	if (err) {
1183 		shost_printk(KERN_ERR, shost,
1184 			     "%s: alloc streams error %d after reset",
1185 			     __func__, err);
1186 		return -EIO;
1187 	}
1188 
1189 	spin_lock_irqsave(shost->host_lock, flags);
1190 	scsi_report_bus_reset(shost, 0);
1191 	spin_unlock_irqrestore(shost->host_lock, flags);
1192 
1193 	return 0;
1194 }
1195 
1196 static void uas_disconnect(struct usb_interface *intf)
1197 {
1198 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1199 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1200 	unsigned long flags;
1201 
1202 	spin_lock_irqsave(&devinfo->lock, flags);
1203 	devinfo->resetting = 1;
1204 	spin_unlock_irqrestore(&devinfo->lock, flags);
1205 
1206 	cancel_work_sync(&devinfo->work);
1207 	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
1208 	usb_kill_anchored_urbs(&devinfo->sense_urbs);
1209 	usb_kill_anchored_urbs(&devinfo->data_urbs);
1210 	uas_zap_pending(devinfo, DID_NO_CONNECT);
1211 
1212 	/*
1213 	 * Prevent SCSI scanning (if it hasn't started yet)
1214 	 * or wait for the SCSI-scanning routine to stop.
1215 	 */
1216 	cancel_work_sync(&devinfo->scan_work);
1217 
1218 	scsi_remove_host(shost);
1219 	uas_free_streams(devinfo);
1220 	scsi_host_put(shost);
1221 }
1222 
1223 /*
1224  * Put the device back in usb-storage mode on shutdown, as some BIOS-es
1225  * hang on reboot when the device is still in uas mode. Note the reset is
1226  * necessary as some devices won't revert to usb-storage mode without it.
1227  */
1228 static void uas_shutdown(struct device *dev)
1229 {
1230 	struct usb_interface *intf = to_usb_interface(dev);
1231 	struct usb_device *udev = interface_to_usbdev(intf);
1232 	struct Scsi_Host *shost = usb_get_intfdata(intf);
1233 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1234 
1235 	if (system_state != SYSTEM_RESTART)
1236 		return;
1237 
1238 	devinfo->shutdown = 1;
1239 	uas_free_streams(devinfo);
1240 	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
1241 	usb_reset_device(udev);
1242 }
1243 
1244 static struct usb_driver uas_driver = {
1245 	.name = "uas",
1246 	.probe = uas_probe,
1247 	.disconnect = uas_disconnect,
1248 	.pre_reset = uas_pre_reset,
1249 	.post_reset = uas_post_reset,
1250 	.suspend = uas_suspend,
1251 	.resume = uas_resume,
1252 	.reset_resume = uas_reset_resume,
1253 	.driver.shutdown = uas_shutdown,
1254 	.id_table = uas_usb_ids,
1255 };
1256 
1257 static int __init uas_init(void)
1258 {
1259 	int rv;
1260 
1261 	workqueue = alloc_workqueue("uas", WQ_MEM_RECLAIM, 0);
1262 	if (!workqueue)
1263 		return -ENOMEM;
1264 
1265 	rv = usb_register(&uas_driver);
1266 	if (rv) {
1267 		destroy_workqueue(workqueue);
1268 		return -ENOMEM;
1269 	}
1270 
1271 	return 0;
1272 }
1273 
1274 static void __exit uas_exit(void)
1275 {
1276 	usb_deregister(&uas_driver);
1277 	destroy_workqueue(workqueue);
1278 }
1279 
1280 module_init(uas_init);
1281 module_exit(uas_exit);
1282 
1283 MODULE_LICENSE("GPL");
1284 MODULE_IMPORT_NS(USB_STORAGE);
1285 MODULE_AUTHOR(
1286 	"Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp");
1287