1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable 4 * 5 * Current development and maintenance by: 6 * (c) 2000, 2001 Robert Baruch (autophile@starband.net) 7 * (c) 2004, 2005 Daniel Drake <dsd@gentoo.org> 8 * 9 * Developed with the assistance of: 10 * (c) 2002 Alan Stern <stern@rowland.org> 11 * 12 * Flash support based on earlier work by: 13 * (c) 2002 Thomas Kreiling <usbdev@sm04.de> 14 * 15 * Many originally ATAPI devices were slightly modified to meet the USB 16 * market by using some kind of translation from ATAPI to USB on the host, 17 * and the peripheral would translate from USB back to ATAPI. 18 * 19 * SCM Microsystems (www.scmmicro.com) makes a device, sold to OEM's only, 20 * which does the USB-to-ATAPI conversion. By obtaining the data sheet on 21 * their device under nondisclosure agreement, I have been able to write 22 * this driver for Linux. 23 * 24 * The chip used in the device can also be used for EPP and ISA translation 25 * as well. This driver is only guaranteed to work with the ATAPI 26 * translation. 27 * 28 * See the Kconfig help text for a list of devices known to be supported by 29 * this driver. 30 */ 31 32 #include <linux/errno.h> 33 #include <linux/module.h> 34 #include <linux/slab.h> 35 #include <linux/cdrom.h> 36 37 #include <scsi/scsi.h> 38 #include <scsi/scsi_cmnd.h> 39 40 #include "usb.h" 41 #include "transport.h" 42 #include "protocol.h" 43 #include "debug.h" 44 #include "scsiglue.h" 45 46 #define DRV_NAME "ums-usbat" 47 48 MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable"); 49 MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>, Robert Baruch <autophile@starband.net>"); 50 MODULE_LICENSE("GPL"); 51 MODULE_IMPORT_NS(USB_STORAGE); 52 53 /* Supported device types */ 54 #define USBAT_DEV_HP8200 0x01 55 #define USBAT_DEV_FLASH 0x02 56 57 #define USBAT_EPP_PORT 0x10 58 #define USBAT_EPP_REGISTER 0x30 59 #define USBAT_ATA 0x40 60 #define USBAT_ISA 0x50 61 62 /* Commands (need to be logically OR'd with an access type */ 63 #define USBAT_CMD_READ_REG 0x00 64 #define USBAT_CMD_WRITE_REG 0x01 65 #define USBAT_CMD_READ_BLOCK 0x02 66 #define USBAT_CMD_WRITE_BLOCK 0x03 67 #define USBAT_CMD_COND_READ_BLOCK 0x04 68 #define USBAT_CMD_COND_WRITE_BLOCK 0x05 69 #define USBAT_CMD_WRITE_REGS 0x07 70 71 /* Commands (these don't need an access type) */ 72 #define USBAT_CMD_EXEC_CMD 0x80 73 #define USBAT_CMD_SET_FEAT 0x81 74 #define USBAT_CMD_UIO 0x82 75 76 /* Methods of accessing UIO register */ 77 #define USBAT_UIO_READ 1 78 #define USBAT_UIO_WRITE 0 79 80 /* Qualifier bits */ 81 #define USBAT_QUAL_FCQ 0x20 /* full compare */ 82 #define USBAT_QUAL_ALQ 0x10 /* auto load subcount */ 83 84 /* USBAT Flash Media status types */ 85 #define USBAT_FLASH_MEDIA_NONE 0 86 #define USBAT_FLASH_MEDIA_CF 1 87 88 /* USBAT Flash Media change types */ 89 #define USBAT_FLASH_MEDIA_SAME 0 90 #define USBAT_FLASH_MEDIA_CHANGED 1 91 92 /* USBAT ATA registers */ 93 #define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */ 94 #define USBAT_ATA_FEATURES 0x11 /* set features (W) */ 95 #define USBAT_ATA_ERROR 0x11 /* error (R) */ 96 #define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */ 97 #define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */ 98 #define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */ 99 #define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */ 100 #define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */ 101 #define USBAT_ATA_STATUS 0x17 /* device status (R) */ 102 #define USBAT_ATA_CMD 0x17 /* device command (W) */ 103 #define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */ 104 105 /* USBAT User I/O Data registers */ 106 #define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */ 107 #define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */ 108 /* CDT = ACKD & !UI1 & !UI0 */ 109 #define USBAT_UIO_1 0x20 /* I/O 1 */ 110 #define USBAT_UIO_0 0x10 /* I/O 0 */ 111 #define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */ 112 #define USBAT_UIO_UI1 0x04 /* Input 1 */ 113 #define USBAT_UIO_UI0 0x02 /* Input 0 */ 114 #define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */ 115 116 /* USBAT User I/O Enable registers */ 117 #define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */ 118 #define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */ 119 #define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */ 120 /* If ACKD=1, set OE1 to 1 also. */ 121 #define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */ 122 #define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */ 123 124 /* USBAT Features */ 125 #define USBAT_FEAT_ETEN 0x80 /* External trigger enable */ 126 #define USBAT_FEAT_U1 0x08 127 #define USBAT_FEAT_U0 0x04 128 #define USBAT_FEAT_ET1 0x02 129 #define USBAT_FEAT_ET2 0x01 130 131 struct usbat_info { 132 int devicetype; 133 134 /* Used for Flash readers only */ 135 unsigned long sectors; /* total sector count */ 136 unsigned long ssize; /* sector size in bytes */ 137 138 unsigned char sense_key; 139 unsigned long sense_asc; /* additional sense code */ 140 unsigned long sense_ascq; /* additional sense code qualifier */ 141 }; 142 143 #define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) ) 144 #define LSB_of(s) ((s)&0xFF) 145 #define MSB_of(s) ((s)>>8) 146 147 static int transferred = 0; 148 149 static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us); 150 static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us); 151 152 static int init_usbat_cd(struct us_data *us); 153 static int init_usbat_flash(struct us_data *us); 154 155 156 /* 157 * The table of devices 158 */ 159 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ 160 vendorName, productName, useProtocol, useTransport, \ 161 initFunction, flags) \ 162 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ 163 .driver_info = (flags) } 164 165 static const struct usb_device_id usbat_usb_ids[] = { 166 # include "unusual_usbat.h" 167 { } /* Terminating entry */ 168 }; 169 MODULE_DEVICE_TABLE(usb, usbat_usb_ids); 170 171 #undef UNUSUAL_DEV 172 173 /* 174 * The flags table 175 */ 176 #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ 177 vendor_name, product_name, use_protocol, use_transport, \ 178 init_function, Flags) \ 179 { \ 180 .vendorName = vendor_name, \ 181 .productName = product_name, \ 182 .useProtocol = use_protocol, \ 183 .useTransport = use_transport, \ 184 .initFunction = init_function, \ 185 } 186 187 static const struct us_unusual_dev usbat_unusual_dev_list[] = { 188 # include "unusual_usbat.h" 189 { } /* Terminating entry */ 190 }; 191 192 #undef UNUSUAL_DEV 193 194 /* 195 * Convenience function to produce an ATA read/write sectors command 196 * Use cmd=0x20 for read, cmd=0x30 for write 197 */ 198 static void usbat_pack_ata_sector_cmd(unsigned char *buf, 199 unsigned char thistime, 200 u32 sector, unsigned char cmd) 201 { 202 buf[0] = 0; 203 buf[1] = thistime; 204 buf[2] = sector & 0xFF; 205 buf[3] = (sector >> 8) & 0xFF; 206 buf[4] = (sector >> 16) & 0xFF; 207 buf[5] = 0xE0 | ((sector >> 24) & 0x0F); 208 buf[6] = cmd; 209 } 210 211 /* 212 * Convenience function to get the device type (flash or hp8200) 213 */ 214 static int usbat_get_device_type(struct us_data *us) 215 { 216 return ((struct usbat_info*)us->extra)->devicetype; 217 } 218 219 /* 220 * Read a register from the device 221 */ 222 static int usbat_read(struct us_data *us, 223 unsigned char access, 224 unsigned char reg, 225 unsigned char *content) 226 { 227 return usb_stor_ctrl_transfer(us, 228 us->recv_ctrl_pipe, 229 access | USBAT_CMD_READ_REG, 230 0xC0, 231 (u16)reg, 232 0, 233 content, 234 1); 235 } 236 237 /* 238 * Write to a register on the device 239 */ 240 static int usbat_write(struct us_data *us, 241 unsigned char access, 242 unsigned char reg, 243 unsigned char content) 244 { 245 return usb_stor_ctrl_transfer(us, 246 us->send_ctrl_pipe, 247 access | USBAT_CMD_WRITE_REG, 248 0x40, 249 short_pack(reg, content), 250 0, 251 NULL, 252 0); 253 } 254 255 /* 256 * Convenience function to perform a bulk read 257 */ 258 static int usbat_bulk_read(struct us_data *us, 259 void* buf, 260 unsigned int len, 261 int use_sg) 262 { 263 if (len == 0) 264 return USB_STOR_XFER_GOOD; 265 266 usb_stor_dbg(us, "len = %d\n", len); 267 return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, buf, len, use_sg, NULL); 268 } 269 270 /* 271 * Convenience function to perform a bulk write 272 */ 273 static int usbat_bulk_write(struct us_data *us, 274 void* buf, 275 unsigned int len, 276 int use_sg) 277 { 278 if (len == 0) 279 return USB_STOR_XFER_GOOD; 280 281 usb_stor_dbg(us, "len = %d\n", len); 282 return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, buf, len, use_sg, NULL); 283 } 284 285 /* 286 * Some USBAT-specific commands can only be executed over a command transport 287 * This transport allows one (len=8) or two (len=16) vendor-specific commands 288 * to be executed. 289 */ 290 static int usbat_execute_command(struct us_data *us, 291 unsigned char *commands, 292 unsigned int len) 293 { 294 return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, 295 USBAT_CMD_EXEC_CMD, 0x40, 0, 0, 296 commands, len); 297 } 298 299 /* 300 * Read the status register 301 */ 302 static int usbat_get_status(struct us_data *us, unsigned char *status) 303 { 304 int rc; 305 rc = usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status); 306 307 usb_stor_dbg(us, "0x%02X\n", *status); 308 return rc; 309 } 310 311 /* 312 * Check the device status 313 */ 314 static int usbat_check_status(struct us_data *us) 315 { 316 unsigned char *reply = us->iobuf; 317 int rc; 318 319 rc = usbat_get_status(us, reply); 320 if (rc != USB_STOR_XFER_GOOD) 321 return USB_STOR_TRANSPORT_FAILED; 322 323 /* error/check condition (0x51 is ok) */ 324 if (*reply & 0x01 && *reply != 0x51) 325 return USB_STOR_TRANSPORT_FAILED; 326 327 /* device fault */ 328 if (*reply & 0x20) 329 return USB_STOR_TRANSPORT_FAILED; 330 331 return USB_STOR_TRANSPORT_GOOD; 332 } 333 334 /* 335 * Stores critical information in internal registers in preparation for the execution 336 * of a conditional usbat_read_blocks or usbat_write_blocks call. 337 */ 338 static int usbat_set_shuttle_features(struct us_data *us, 339 unsigned char external_trigger, 340 unsigned char epp_control, 341 unsigned char mask_byte, 342 unsigned char test_pattern, 343 unsigned char subcountH, 344 unsigned char subcountL) 345 { 346 unsigned char *command = us->iobuf; 347 348 command[0] = 0x40; 349 command[1] = USBAT_CMD_SET_FEAT; 350 351 /* 352 * The only bit relevant to ATA access is bit 6 353 * which defines 8 bit data access (set) or 16 bit (unset) 354 */ 355 command[2] = epp_control; 356 357 /* 358 * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1, 359 * ET1 and ET2 define an external event to be checked for on event of a 360 * _read_blocks or _write_blocks operation. The read/write will not take 361 * place unless the defined trigger signal is active. 362 */ 363 command[3] = external_trigger; 364 365 /* 366 * The resultant byte of the mask operation (see mask_byte) is compared for 367 * equivalence with this test pattern. If equal, the read/write will take 368 * place. 369 */ 370 command[4] = test_pattern; 371 372 /* 373 * This value is logically ANDed with the status register field specified 374 * in the read/write command. 375 */ 376 command[5] = mask_byte; 377 378 /* 379 * If ALQ is set in the qualifier, this field contains the address of the 380 * registers where the byte count should be read for transferring the data. 381 * If ALQ is not set, then this field contains the number of bytes to be 382 * transferred. 383 */ 384 command[6] = subcountL; 385 command[7] = subcountH; 386 387 return usbat_execute_command(us, command, 8); 388 } 389 390 /* 391 * Block, waiting for an ATA device to become not busy or to report 392 * an error condition. 393 */ 394 static int usbat_wait_not_busy(struct us_data *us, int minutes) 395 { 396 int i; 397 int result; 398 unsigned char *status = us->iobuf; 399 400 /* 401 * Synchronizing cache on a CDR could take a heck of a long time, 402 * but probably not more than 10 minutes or so. On the other hand, 403 * doing a full blank on a CDRW at speed 1 will take about 75 404 * minutes! 405 */ 406 407 for (i=0; i<1200+minutes*60; i++) { 408 409 result = usbat_get_status(us, status); 410 411 if (result!=USB_STOR_XFER_GOOD) 412 return USB_STOR_TRANSPORT_ERROR; 413 if (*status & 0x01) { /* check condition */ 414 result = usbat_read(us, USBAT_ATA, 0x10, status); 415 return USB_STOR_TRANSPORT_FAILED; 416 } 417 if (*status & 0x20) /* device fault */ 418 return USB_STOR_TRANSPORT_FAILED; 419 420 if ((*status & 0x80)==0x00) { /* not busy */ 421 usb_stor_dbg(us, "Waited not busy for %d steps\n", i); 422 return USB_STOR_TRANSPORT_GOOD; 423 } 424 425 if (i<500) 426 msleep(10); /* 5 seconds */ 427 else if (i<700) 428 msleep(50); /* 10 seconds */ 429 else if (i<1200) 430 msleep(100); /* 50 seconds */ 431 else 432 msleep(1000); /* X minutes */ 433 } 434 435 usb_stor_dbg(us, "Waited not busy for %d minutes, timing out\n", 436 minutes); 437 return USB_STOR_TRANSPORT_FAILED; 438 } 439 440 /* 441 * Read block data from the data register 442 */ 443 static int usbat_read_block(struct us_data *us, 444 void* buf, 445 unsigned short len, 446 int use_sg) 447 { 448 int result; 449 unsigned char *command = us->iobuf; 450 451 if (!len) 452 return USB_STOR_TRANSPORT_GOOD; 453 454 command[0] = 0xC0; 455 command[1] = USBAT_ATA | USBAT_CMD_READ_BLOCK; 456 command[2] = USBAT_ATA_DATA; 457 command[3] = 0; 458 command[4] = 0; 459 command[5] = 0; 460 command[6] = LSB_of(len); 461 command[7] = MSB_of(len); 462 463 result = usbat_execute_command(us, command, 8); 464 if (result != USB_STOR_XFER_GOOD) 465 return USB_STOR_TRANSPORT_ERROR; 466 467 result = usbat_bulk_read(us, buf, len, use_sg); 468 return (result == USB_STOR_XFER_GOOD ? 469 USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); 470 } 471 472 /* 473 * Write block data via the data register 474 */ 475 static int usbat_write_block(struct us_data *us, 476 unsigned char access, 477 void* buf, 478 unsigned short len, 479 int minutes, 480 int use_sg) 481 { 482 int result; 483 unsigned char *command = us->iobuf; 484 485 if (!len) 486 return USB_STOR_TRANSPORT_GOOD; 487 488 command[0] = 0x40; 489 command[1] = access | USBAT_CMD_WRITE_BLOCK; 490 command[2] = USBAT_ATA_DATA; 491 command[3] = 0; 492 command[4] = 0; 493 command[5] = 0; 494 command[6] = LSB_of(len); 495 command[7] = MSB_of(len); 496 497 result = usbat_execute_command(us, command, 8); 498 499 if (result != USB_STOR_XFER_GOOD) 500 return USB_STOR_TRANSPORT_ERROR; 501 502 result = usbat_bulk_write(us, buf, len, use_sg); 503 if (result != USB_STOR_XFER_GOOD) 504 return USB_STOR_TRANSPORT_ERROR; 505 506 return usbat_wait_not_busy(us, minutes); 507 } 508 509 /* 510 * Process read and write requests 511 */ 512 static int usbat_hp8200e_rw_block_test(struct us_data *us, 513 unsigned char access, 514 unsigned char *registers, 515 unsigned char *data_out, 516 unsigned short num_registers, 517 unsigned char data_reg, 518 unsigned char status_reg, 519 unsigned char timeout, 520 unsigned char qualifier, 521 int direction, 522 void *buf, 523 unsigned short len, 524 int use_sg, 525 int minutes) 526 { 527 int result; 528 unsigned int pipe = (direction == DMA_FROM_DEVICE) ? 529 us->recv_bulk_pipe : us->send_bulk_pipe; 530 531 unsigned char *command = us->iobuf; 532 int i, j; 533 int cmdlen; 534 unsigned char *data = us->iobuf; 535 unsigned char *status = us->iobuf; 536 537 BUG_ON(num_registers > US_IOBUF_SIZE/2); 538 539 for (i=0; i<20; i++) { 540 541 /* 542 * The first time we send the full command, which consists 543 * of downloading the SCSI command followed by downloading 544 * the data via a write-and-test. Any other time we only 545 * send the command to download the data -- the SCSI command 546 * is still 'active' in some sense in the device. 547 * 548 * We're only going to try sending the data 10 times. After 549 * that, we just return a failure. 550 */ 551 552 if (i==0) { 553 cmdlen = 16; 554 /* 555 * Write to multiple registers 556 * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is 557 * necessary here, but that's what came out of the 558 * trace every single time. 559 */ 560 command[0] = 0x40; 561 command[1] = access | USBAT_CMD_WRITE_REGS; 562 command[2] = 0x07; 563 command[3] = 0x17; 564 command[4] = 0xFC; 565 command[5] = 0xE7; 566 command[6] = LSB_of(num_registers*2); 567 command[7] = MSB_of(num_registers*2); 568 } else 569 cmdlen = 8; 570 571 /* Conditionally read or write blocks */ 572 command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0); 573 command[cmdlen-7] = access | 574 (direction==DMA_TO_DEVICE ? 575 USBAT_CMD_COND_WRITE_BLOCK : USBAT_CMD_COND_READ_BLOCK); 576 command[cmdlen-6] = data_reg; 577 command[cmdlen-5] = status_reg; 578 command[cmdlen-4] = timeout; 579 command[cmdlen-3] = qualifier; 580 command[cmdlen-2] = LSB_of(len); 581 command[cmdlen-1] = MSB_of(len); 582 583 result = usbat_execute_command(us, command, cmdlen); 584 585 if (result != USB_STOR_XFER_GOOD) 586 return USB_STOR_TRANSPORT_ERROR; 587 588 if (i==0) { 589 590 for (j=0; j<num_registers; j++) { 591 data[j<<1] = registers[j]; 592 data[1+(j<<1)] = data_out[j]; 593 } 594 595 result = usbat_bulk_write(us, data, num_registers*2, 0); 596 if (result != USB_STOR_XFER_GOOD) 597 return USB_STOR_TRANSPORT_ERROR; 598 599 } 600 601 result = usb_stor_bulk_transfer_sg(us, 602 pipe, buf, len, use_sg, NULL); 603 604 /* 605 * If we get a stall on the bulk download, we'll retry 606 * the bulk download -- but not the SCSI command because 607 * in some sense the SCSI command is still 'active' and 608 * waiting for the data. Don't ask me why this should be; 609 * I'm only following what the Windoze driver did. 610 * 611 * Note that a stall for the test-and-read/write command means 612 * that the test failed. In this case we're testing to make 613 * sure that the device is error-free 614 * (i.e. bit 0 -- CHK -- of status is 0). The most likely 615 * hypothesis is that the USBAT chip somehow knows what 616 * the device will accept, but doesn't give the device any 617 * data until all data is received. Thus, the device would 618 * still be waiting for the first byte of data if a stall 619 * occurs, even if the stall implies that some data was 620 * transferred. 621 */ 622 623 if (result == USB_STOR_XFER_SHORT || 624 result == USB_STOR_XFER_STALLED) { 625 626 /* 627 * If we're reading and we stalled, then clear 628 * the bulk output pipe only the first time. 629 */ 630 631 if (direction==DMA_FROM_DEVICE && i==0) { 632 if (usb_stor_clear_halt(us, 633 us->send_bulk_pipe) < 0) 634 return USB_STOR_TRANSPORT_ERROR; 635 } 636 637 /* 638 * Read status: is the device angry, or just busy? 639 */ 640 641 result = usbat_read(us, USBAT_ATA, 642 direction==DMA_TO_DEVICE ? 643 USBAT_ATA_STATUS : USBAT_ATA_ALTSTATUS, 644 status); 645 646 if (result!=USB_STOR_XFER_GOOD) 647 return USB_STOR_TRANSPORT_ERROR; 648 if (*status & 0x01) /* check condition */ 649 return USB_STOR_TRANSPORT_FAILED; 650 if (*status & 0x20) /* device fault */ 651 return USB_STOR_TRANSPORT_FAILED; 652 653 usb_stor_dbg(us, "Redoing %s\n", 654 direction == DMA_TO_DEVICE 655 ? "write" : "read"); 656 657 } else if (result != USB_STOR_XFER_GOOD) 658 return USB_STOR_TRANSPORT_ERROR; 659 else 660 return usbat_wait_not_busy(us, minutes); 661 662 } 663 664 usb_stor_dbg(us, "Bummer! %s bulk data 20 times failed\n", 665 direction == DMA_TO_DEVICE ? "Writing" : "Reading"); 666 667 return USB_STOR_TRANSPORT_FAILED; 668 } 669 670 /* 671 * Write to multiple registers: 672 * Allows us to write specific data to any registers. The data to be written 673 * gets packed in this sequence: reg0, data0, reg1, data1, ..., regN, dataN 674 * which gets sent through bulk out. 675 * Not designed for large transfers of data! 676 */ 677 static int usbat_multiple_write(struct us_data *us, 678 unsigned char *registers, 679 unsigned char *data_out, 680 unsigned short num_registers) 681 { 682 int i, result; 683 unsigned char *data = us->iobuf; 684 unsigned char *command = us->iobuf; 685 686 BUG_ON(num_registers > US_IOBUF_SIZE/2); 687 688 /* Write to multiple registers, ATA access */ 689 command[0] = 0x40; 690 command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS; 691 692 /* No relevance */ 693 command[2] = 0; 694 command[3] = 0; 695 command[4] = 0; 696 command[5] = 0; 697 698 /* Number of bytes to be transferred (incl. addresses and data) */ 699 command[6] = LSB_of(num_registers*2); 700 command[7] = MSB_of(num_registers*2); 701 702 /* The setup command */ 703 result = usbat_execute_command(us, command, 8); 704 if (result != USB_STOR_XFER_GOOD) 705 return USB_STOR_TRANSPORT_ERROR; 706 707 /* Create the reg/data, reg/data sequence */ 708 for (i=0; i<num_registers; i++) { 709 data[i<<1] = registers[i]; 710 data[1+(i<<1)] = data_out[i]; 711 } 712 713 /* Send the data */ 714 result = usbat_bulk_write(us, data, num_registers*2, 0); 715 if (result != USB_STOR_XFER_GOOD) 716 return USB_STOR_TRANSPORT_ERROR; 717 718 if (usbat_get_device_type(us) == USBAT_DEV_HP8200) 719 return usbat_wait_not_busy(us, 0); 720 else 721 return USB_STOR_TRANSPORT_GOOD; 722 } 723 724 /* 725 * Conditionally read blocks from device: 726 * Allows us to read blocks from a specific data register, based upon the 727 * condition that a status register can be successfully masked with a status 728 * qualifier. If this condition is not initially met, the read will wait 729 * up until a maximum amount of time has elapsed, as specified by timeout. 730 * The read will start when the condition is met, otherwise the command aborts. 731 * 732 * The qualifier defined here is not the value that is masked, it defines 733 * conditions for the write to take place. The actual masked qualifier (and 734 * other related details) are defined beforehand with _set_shuttle_features(). 735 */ 736 static int usbat_read_blocks(struct us_data *us, 737 void* buffer, 738 int len, 739 int use_sg) 740 { 741 int result; 742 unsigned char *command = us->iobuf; 743 744 command[0] = 0xC0; 745 command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK; 746 command[2] = USBAT_ATA_DATA; 747 command[3] = USBAT_ATA_STATUS; 748 command[4] = 0xFD; /* Timeout (ms); */ 749 command[5] = USBAT_QUAL_FCQ; 750 command[6] = LSB_of(len); 751 command[7] = MSB_of(len); 752 753 /* Multiple block read setup command */ 754 result = usbat_execute_command(us, command, 8); 755 if (result != USB_STOR_XFER_GOOD) 756 return USB_STOR_TRANSPORT_FAILED; 757 758 /* Read the blocks we just asked for */ 759 result = usbat_bulk_read(us, buffer, len, use_sg); 760 if (result != USB_STOR_XFER_GOOD) 761 return USB_STOR_TRANSPORT_FAILED; 762 763 return USB_STOR_TRANSPORT_GOOD; 764 } 765 766 /* 767 * Conditionally write blocks to device: 768 * Allows us to write blocks to a specific data register, based upon the 769 * condition that a status register can be successfully masked with a status 770 * qualifier. If this condition is not initially met, the write will wait 771 * up until a maximum amount of time has elapsed, as specified by timeout. 772 * The read will start when the condition is met, otherwise the command aborts. 773 * 774 * The qualifier defined here is not the value that is masked, it defines 775 * conditions for the write to take place. The actual masked qualifier (and 776 * other related details) are defined beforehand with _set_shuttle_features(). 777 */ 778 static int usbat_write_blocks(struct us_data *us, 779 void* buffer, 780 int len, 781 int use_sg) 782 { 783 int result; 784 unsigned char *command = us->iobuf; 785 786 command[0] = 0x40; 787 command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK; 788 command[2] = USBAT_ATA_DATA; 789 command[3] = USBAT_ATA_STATUS; 790 command[4] = 0xFD; /* Timeout (ms) */ 791 command[5] = USBAT_QUAL_FCQ; 792 command[6] = LSB_of(len); 793 command[7] = MSB_of(len); 794 795 /* Multiple block write setup command */ 796 result = usbat_execute_command(us, command, 8); 797 if (result != USB_STOR_XFER_GOOD) 798 return USB_STOR_TRANSPORT_FAILED; 799 800 /* Write the data */ 801 result = usbat_bulk_write(us, buffer, len, use_sg); 802 if (result != USB_STOR_XFER_GOOD) 803 return USB_STOR_TRANSPORT_FAILED; 804 805 return USB_STOR_TRANSPORT_GOOD; 806 } 807 808 /* 809 * Read the User IO register 810 */ 811 static int usbat_read_user_io(struct us_data *us, unsigned char *data_flags) 812 { 813 int result; 814 815 result = usb_stor_ctrl_transfer(us, 816 us->recv_ctrl_pipe, 817 USBAT_CMD_UIO, 818 0xC0, 819 0, 820 0, 821 data_flags, 822 USBAT_UIO_READ); 823 824 usb_stor_dbg(us, "UIO register reads %02X\n", *data_flags); 825 826 return result; 827 } 828 829 /* 830 * Write to the User IO register 831 */ 832 static int usbat_write_user_io(struct us_data *us, 833 unsigned char enable_flags, 834 unsigned char data_flags) 835 { 836 return usb_stor_ctrl_transfer(us, 837 us->send_ctrl_pipe, 838 USBAT_CMD_UIO, 839 0x40, 840 short_pack(enable_flags, data_flags), 841 0, 842 NULL, 843 USBAT_UIO_WRITE); 844 } 845 846 /* 847 * Reset the device 848 * Often needed on media change. 849 */ 850 static int usbat_device_reset(struct us_data *us) 851 { 852 int rc; 853 854 /* 855 * Reset peripheral, enable peripheral control signals 856 * (bring reset signal up) 857 */ 858 rc = usbat_write_user_io(us, 859 USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0, 860 USBAT_UIO_EPAD | USBAT_UIO_1); 861 if (rc != USB_STOR_XFER_GOOD) 862 return USB_STOR_TRANSPORT_ERROR; 863 864 /* 865 * Enable peripheral control signals 866 * (bring reset signal down) 867 */ 868 rc = usbat_write_user_io(us, 869 USBAT_UIO_OE1 | USBAT_UIO_OE0, 870 USBAT_UIO_EPAD | USBAT_UIO_1); 871 if (rc != USB_STOR_XFER_GOOD) 872 return USB_STOR_TRANSPORT_ERROR; 873 874 return USB_STOR_TRANSPORT_GOOD; 875 } 876 877 /* 878 * Enable card detect 879 */ 880 static int usbat_device_enable_cdt(struct us_data *us) 881 { 882 int rc; 883 884 /* Enable peripheral control signals and card detect */ 885 rc = usbat_write_user_io(us, 886 USBAT_UIO_ACKD | USBAT_UIO_OE1 | USBAT_UIO_OE0, 887 USBAT_UIO_EPAD | USBAT_UIO_1); 888 if (rc != USB_STOR_XFER_GOOD) 889 return USB_STOR_TRANSPORT_ERROR; 890 891 return USB_STOR_TRANSPORT_GOOD; 892 } 893 894 /* 895 * Determine if media is present. 896 */ 897 static int usbat_flash_check_media_present(struct us_data *us, 898 unsigned char *uio) 899 { 900 if (*uio & USBAT_UIO_UI0) { 901 usb_stor_dbg(us, "no media detected\n"); 902 return USBAT_FLASH_MEDIA_NONE; 903 } 904 905 return USBAT_FLASH_MEDIA_CF; 906 } 907 908 /* 909 * Determine if media has changed since last operation 910 */ 911 static int usbat_flash_check_media_changed(struct us_data *us, 912 unsigned char *uio) 913 { 914 if (*uio & USBAT_UIO_0) { 915 usb_stor_dbg(us, "media change detected\n"); 916 return USBAT_FLASH_MEDIA_CHANGED; 917 } 918 919 return USBAT_FLASH_MEDIA_SAME; 920 } 921 922 /* 923 * Check for media change / no media and handle the situation appropriately 924 */ 925 static int usbat_flash_check_media(struct us_data *us, 926 struct usbat_info *info) 927 { 928 int rc; 929 unsigned char *uio = us->iobuf; 930 931 rc = usbat_read_user_io(us, uio); 932 if (rc != USB_STOR_XFER_GOOD) 933 return USB_STOR_TRANSPORT_ERROR; 934 935 /* Check for media existence */ 936 rc = usbat_flash_check_media_present(us, uio); 937 if (rc == USBAT_FLASH_MEDIA_NONE) { 938 info->sense_key = 0x02; 939 info->sense_asc = 0x3A; 940 info->sense_ascq = 0x00; 941 return USB_STOR_TRANSPORT_FAILED; 942 } 943 944 /* Check for media change */ 945 rc = usbat_flash_check_media_changed(us, uio); 946 if (rc == USBAT_FLASH_MEDIA_CHANGED) { 947 948 /* Reset and re-enable card detect */ 949 rc = usbat_device_reset(us); 950 if (rc != USB_STOR_TRANSPORT_GOOD) 951 return rc; 952 rc = usbat_device_enable_cdt(us); 953 if (rc != USB_STOR_TRANSPORT_GOOD) 954 return rc; 955 956 msleep(50); 957 958 rc = usbat_read_user_io(us, uio); 959 if (rc != USB_STOR_XFER_GOOD) 960 return USB_STOR_TRANSPORT_ERROR; 961 962 info->sense_key = UNIT_ATTENTION; 963 info->sense_asc = 0x28; 964 info->sense_ascq = 0x00; 965 return USB_STOR_TRANSPORT_FAILED; 966 } 967 968 return USB_STOR_TRANSPORT_GOOD; 969 } 970 971 /* 972 * Determine whether we are controlling a flash-based reader/writer, 973 * or a HP8200-based CD drive. 974 * Sets transport functions as appropriate. 975 */ 976 static int usbat_identify_device(struct us_data *us, 977 struct usbat_info *info) 978 { 979 int rc; 980 unsigned char status; 981 982 if (!us || !info) 983 return USB_STOR_TRANSPORT_ERROR; 984 985 rc = usbat_device_reset(us); 986 if (rc != USB_STOR_TRANSPORT_GOOD) 987 return rc; 988 msleep(500); 989 990 /* 991 * In attempt to distinguish between HP CDRW's and Flash readers, we now 992 * execute the IDENTIFY PACKET DEVICE command. On ATA devices (i.e. flash 993 * readers), this command should fail with error. On ATAPI devices (i.e. 994 * CDROM drives), it should succeed. 995 */ 996 rc = usbat_write(us, USBAT_ATA, USBAT_ATA_CMD, 0xA1); 997 if (rc != USB_STOR_XFER_GOOD) 998 return USB_STOR_TRANSPORT_ERROR; 999 1000 rc = usbat_get_status(us, &status); 1001 if (rc != USB_STOR_XFER_GOOD) 1002 return USB_STOR_TRANSPORT_ERROR; 1003 1004 /* Check for error bit, or if the command 'fell through' */ 1005 if (status == 0xA1 || !(status & 0x01)) { 1006 /* Device is HP 8200 */ 1007 usb_stor_dbg(us, "Detected HP8200 CDRW\n"); 1008 info->devicetype = USBAT_DEV_HP8200; 1009 } else { 1010 /* Device is a CompactFlash reader/writer */ 1011 usb_stor_dbg(us, "Detected Flash reader/writer\n"); 1012 info->devicetype = USBAT_DEV_FLASH; 1013 } 1014 1015 return USB_STOR_TRANSPORT_GOOD; 1016 } 1017 1018 /* 1019 * Set the transport function based on the device type 1020 */ 1021 static int usbat_set_transport(struct us_data *us, 1022 struct usbat_info *info, 1023 int devicetype) 1024 { 1025 1026 if (!info->devicetype) 1027 info->devicetype = devicetype; 1028 1029 if (!info->devicetype) 1030 usbat_identify_device(us, info); 1031 1032 switch (info->devicetype) { 1033 default: 1034 return USB_STOR_TRANSPORT_ERROR; 1035 1036 case USBAT_DEV_HP8200: 1037 us->transport = usbat_hp8200e_transport; 1038 break; 1039 1040 case USBAT_DEV_FLASH: 1041 us->transport = usbat_flash_transport; 1042 break; 1043 } 1044 1045 return 0; 1046 } 1047 1048 /* 1049 * Read the media capacity 1050 */ 1051 static int usbat_flash_get_sector_count(struct us_data *us, 1052 struct usbat_info *info) 1053 { 1054 unsigned char registers[3] = { 1055 USBAT_ATA_SECCNT, 1056 USBAT_ATA_DEVICE, 1057 USBAT_ATA_CMD, 1058 }; 1059 unsigned char command[3] = { 0x01, 0xA0, 0xEC }; 1060 unsigned char *reply; 1061 unsigned char status; 1062 int rc; 1063 1064 if (!us || !info) 1065 return USB_STOR_TRANSPORT_ERROR; 1066 1067 reply = kmalloc(512, GFP_NOIO); 1068 if (!reply) 1069 return USB_STOR_TRANSPORT_ERROR; 1070 1071 /* ATA command : IDENTIFY DEVICE */ 1072 rc = usbat_multiple_write(us, registers, command, 3); 1073 if (rc != USB_STOR_XFER_GOOD) { 1074 usb_stor_dbg(us, "Gah! identify_device failed\n"); 1075 rc = USB_STOR_TRANSPORT_ERROR; 1076 goto leave; 1077 } 1078 1079 /* Read device status */ 1080 if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) { 1081 rc = USB_STOR_TRANSPORT_ERROR; 1082 goto leave; 1083 } 1084 1085 msleep(100); 1086 1087 /* Read the device identification data */ 1088 rc = usbat_read_block(us, reply, 512, 0); 1089 if (rc != USB_STOR_TRANSPORT_GOOD) 1090 goto leave; 1091 1092 info->sectors = ((u32)(reply[117]) << 24) | 1093 ((u32)(reply[116]) << 16) | 1094 ((u32)(reply[115]) << 8) | 1095 ((u32)(reply[114]) ); 1096 1097 rc = USB_STOR_TRANSPORT_GOOD; 1098 1099 leave: 1100 kfree(reply); 1101 return rc; 1102 } 1103 1104 /* 1105 * Read data from device 1106 */ 1107 static int usbat_flash_read_data(struct us_data *us, 1108 struct usbat_info *info, 1109 u32 sector, 1110 u32 sectors) 1111 { 1112 unsigned char registers[7] = { 1113 USBAT_ATA_FEATURES, 1114 USBAT_ATA_SECCNT, 1115 USBAT_ATA_SECNUM, 1116 USBAT_ATA_LBA_ME, 1117 USBAT_ATA_LBA_HI, 1118 USBAT_ATA_DEVICE, 1119 USBAT_ATA_STATUS, 1120 }; 1121 unsigned char command[7]; 1122 unsigned char *buffer; 1123 unsigned char thistime; 1124 unsigned int totallen, alloclen; 1125 int len, result; 1126 unsigned int sg_offset = 0; 1127 struct scatterlist *sg = NULL; 1128 1129 result = usbat_flash_check_media(us, info); 1130 if (result != USB_STOR_TRANSPORT_GOOD) 1131 return result; 1132 1133 /* 1134 * we're working in LBA mode. according to the ATA spec, 1135 * we can support up to 28-bit addressing. I don't know if Jumpshot 1136 * supports beyond 24-bit addressing. It's kind of hard to test 1137 * since it requires > 8GB CF card. 1138 */ 1139 1140 if (sector > 0x0FFFFFFF) 1141 return USB_STOR_TRANSPORT_ERROR; 1142 1143 totallen = sectors * info->ssize; 1144 1145 /* 1146 * Since we don't read more than 64 KB at a time, we have to create 1147 * a bounce buffer and move the data a piece at a time between the 1148 * bounce buffer and the actual transfer buffer. 1149 */ 1150 1151 alloclen = min(totallen, 65536u); 1152 buffer = kmalloc(alloclen, GFP_NOIO); 1153 if (buffer == NULL) 1154 return USB_STOR_TRANSPORT_ERROR; 1155 1156 do { 1157 /* 1158 * loop, never allocate or transfer more than 64k at once 1159 * (min(128k, 255*info->ssize) is the real limit) 1160 */ 1161 len = min(totallen, alloclen); 1162 thistime = (len / info->ssize) & 0xff; 1163 1164 /* ATA command 0x20 (READ SECTORS) */ 1165 usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20); 1166 1167 /* Write/execute ATA read command */ 1168 result = usbat_multiple_write(us, registers, command, 7); 1169 if (result != USB_STOR_TRANSPORT_GOOD) 1170 goto leave; 1171 1172 /* Read the data we just requested */ 1173 result = usbat_read_blocks(us, buffer, len, 0); 1174 if (result != USB_STOR_TRANSPORT_GOOD) 1175 goto leave; 1176 1177 usb_stor_dbg(us, "%d bytes\n", len); 1178 1179 /* Store the data in the transfer buffer */ 1180 usb_stor_access_xfer_buf(buffer, len, us->srb, 1181 &sg, &sg_offset, TO_XFER_BUF); 1182 1183 sector += thistime; 1184 totallen -= len; 1185 } while (totallen > 0); 1186 1187 kfree(buffer); 1188 return USB_STOR_TRANSPORT_GOOD; 1189 1190 leave: 1191 kfree(buffer); 1192 return USB_STOR_TRANSPORT_ERROR; 1193 } 1194 1195 /* 1196 * Write data to device 1197 */ 1198 static int usbat_flash_write_data(struct us_data *us, 1199 struct usbat_info *info, 1200 u32 sector, 1201 u32 sectors) 1202 { 1203 unsigned char registers[7] = { 1204 USBAT_ATA_FEATURES, 1205 USBAT_ATA_SECCNT, 1206 USBAT_ATA_SECNUM, 1207 USBAT_ATA_LBA_ME, 1208 USBAT_ATA_LBA_HI, 1209 USBAT_ATA_DEVICE, 1210 USBAT_ATA_STATUS, 1211 }; 1212 unsigned char command[7]; 1213 unsigned char *buffer; 1214 unsigned char thistime; 1215 unsigned int totallen, alloclen; 1216 int len, result; 1217 unsigned int sg_offset = 0; 1218 struct scatterlist *sg = NULL; 1219 1220 result = usbat_flash_check_media(us, info); 1221 if (result != USB_STOR_TRANSPORT_GOOD) 1222 return result; 1223 1224 /* 1225 * we're working in LBA mode. according to the ATA spec, 1226 * we can support up to 28-bit addressing. I don't know if the device 1227 * supports beyond 24-bit addressing. It's kind of hard to test 1228 * since it requires > 8GB media. 1229 */ 1230 1231 if (sector > 0x0FFFFFFF) 1232 return USB_STOR_TRANSPORT_ERROR; 1233 1234 totallen = sectors * info->ssize; 1235 1236 /* 1237 * Since we don't write more than 64 KB at a time, we have to create 1238 * a bounce buffer and move the data a piece at a time between the 1239 * bounce buffer and the actual transfer buffer. 1240 */ 1241 1242 alloclen = min(totallen, 65536u); 1243 buffer = kmalloc(alloclen, GFP_NOIO); 1244 if (buffer == NULL) 1245 return USB_STOR_TRANSPORT_ERROR; 1246 1247 do { 1248 /* 1249 * loop, never allocate or transfer more than 64k at once 1250 * (min(128k, 255*info->ssize) is the real limit) 1251 */ 1252 len = min(totallen, alloclen); 1253 thistime = (len / info->ssize) & 0xff; 1254 1255 /* Get the data from the transfer buffer */ 1256 usb_stor_access_xfer_buf(buffer, len, us->srb, 1257 &sg, &sg_offset, FROM_XFER_BUF); 1258 1259 /* ATA command 0x30 (WRITE SECTORS) */ 1260 usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30); 1261 1262 /* Write/execute ATA write command */ 1263 result = usbat_multiple_write(us, registers, command, 7); 1264 if (result != USB_STOR_TRANSPORT_GOOD) 1265 goto leave; 1266 1267 /* Write the data */ 1268 result = usbat_write_blocks(us, buffer, len, 0); 1269 if (result != USB_STOR_TRANSPORT_GOOD) 1270 goto leave; 1271 1272 sector += thistime; 1273 totallen -= len; 1274 } while (totallen > 0); 1275 1276 kfree(buffer); 1277 return result; 1278 1279 leave: 1280 kfree(buffer); 1281 return USB_STOR_TRANSPORT_ERROR; 1282 } 1283 1284 /* 1285 * Squeeze a potentially huge (> 65535 byte) read10 command into 1286 * a little ( <= 65535 byte) ATAPI pipe 1287 */ 1288 static int usbat_hp8200e_handle_read10(struct us_data *us, 1289 unsigned char *registers, 1290 unsigned char *data, 1291 struct scsi_cmnd *srb) 1292 { 1293 int result = USB_STOR_TRANSPORT_GOOD; 1294 unsigned char *buffer; 1295 unsigned int len; 1296 unsigned int sector; 1297 unsigned int sg_offset = 0; 1298 struct scatterlist *sg = NULL; 1299 1300 usb_stor_dbg(us, "transfersize %d\n", srb->transfersize); 1301 1302 if (scsi_bufflen(srb) < 0x10000) { 1303 1304 result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, 1305 registers, data, 19, 1306 USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, 1307 (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), 1308 DMA_FROM_DEVICE, 1309 scsi_sglist(srb), 1310 scsi_bufflen(srb), scsi_sg_count(srb), 1); 1311 1312 return result; 1313 } 1314 1315 /* 1316 * Since we're requesting more data than we can handle in 1317 * a single read command (max is 64k-1), we will perform 1318 * multiple reads, but each read must be in multiples of 1319 * a sector. Luckily the sector size is in srb->transfersize 1320 * (see linux/drivers/scsi/sr.c). 1321 */ 1322 1323 if (data[7+0] == GPCMD_READ_CD) { 1324 len = short_pack(data[7+9], data[7+8]); 1325 len <<= 16; 1326 len |= data[7+7]; 1327 usb_stor_dbg(us, "GPCMD_READ_CD: len %d\n", len); 1328 srb->transfersize = scsi_bufflen(srb)/len; 1329 } 1330 1331 if (!srb->transfersize) { 1332 srb->transfersize = 2048; /* A guess */ 1333 usb_stor_dbg(us, "transfersize 0, forcing %d\n", 1334 srb->transfersize); 1335 } 1336 1337 /* 1338 * Since we only read in one block at a time, we have to create 1339 * a bounce buffer and move the data a piece at a time between the 1340 * bounce buffer and the actual transfer buffer. 1341 */ 1342 1343 len = (65535/srb->transfersize) * srb->transfersize; 1344 usb_stor_dbg(us, "Max read is %d bytes\n", len); 1345 len = min(len, scsi_bufflen(srb)); 1346 buffer = kmalloc(len, GFP_NOIO); 1347 if (buffer == NULL) /* bloody hell! */ 1348 return USB_STOR_TRANSPORT_FAILED; 1349 sector = short_pack(data[7+3], data[7+2]); 1350 sector <<= 16; 1351 sector |= short_pack(data[7+5], data[7+4]); 1352 transferred = 0; 1353 1354 while (transferred != scsi_bufflen(srb)) { 1355 1356 if (len > scsi_bufflen(srb) - transferred) 1357 len = scsi_bufflen(srb) - transferred; 1358 1359 data[3] = len&0xFF; /* (cylL) = expected length (L) */ 1360 data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */ 1361 1362 /* Fix up the SCSI command sector and num sectors */ 1363 1364 data[7+2] = MSB_of(sector>>16); /* SCSI command sector */ 1365 data[7+3] = LSB_of(sector>>16); 1366 data[7+4] = MSB_of(sector&0xFFFF); 1367 data[7+5] = LSB_of(sector&0xFFFF); 1368 if (data[7+0] == GPCMD_READ_CD) 1369 data[7+6] = 0; 1370 data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */ 1371 data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */ 1372 1373 result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, 1374 registers, data, 19, 1375 USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, 1376 (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), 1377 DMA_FROM_DEVICE, 1378 buffer, 1379 len, 0, 1); 1380 1381 if (result != USB_STOR_TRANSPORT_GOOD) 1382 break; 1383 1384 /* Store the data in the transfer buffer */ 1385 usb_stor_access_xfer_buf(buffer, len, srb, 1386 &sg, &sg_offset, TO_XFER_BUF); 1387 1388 /* Update the amount transferred and the sector number */ 1389 1390 transferred += len; 1391 sector += len / srb->transfersize; 1392 1393 } /* while transferred != scsi_bufflen(srb) */ 1394 1395 kfree(buffer); 1396 return result; 1397 } 1398 1399 static int usbat_select_and_test_registers(struct us_data *us) 1400 { 1401 int selector; 1402 unsigned char *status = us->iobuf; 1403 1404 /* try device = master, then device = slave. */ 1405 for (selector = 0xA0; selector <= 0xB0; selector += 0x10) { 1406 if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) != 1407 USB_STOR_XFER_GOOD) 1408 return USB_STOR_TRANSPORT_ERROR; 1409 1410 if (usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status) != 1411 USB_STOR_XFER_GOOD) 1412 return USB_STOR_TRANSPORT_ERROR; 1413 1414 if (usbat_read(us, USBAT_ATA, USBAT_ATA_DEVICE, status) != 1415 USB_STOR_XFER_GOOD) 1416 return USB_STOR_TRANSPORT_ERROR; 1417 1418 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 1419 USB_STOR_XFER_GOOD) 1420 return USB_STOR_TRANSPORT_ERROR; 1421 1422 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != 1423 USB_STOR_XFER_GOOD) 1424 return USB_STOR_TRANSPORT_ERROR; 1425 1426 if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_ME, 0x55) != 1427 USB_STOR_XFER_GOOD) 1428 return USB_STOR_TRANSPORT_ERROR; 1429 1430 if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_HI, 0xAA) != 1431 USB_STOR_XFER_GOOD) 1432 return USB_STOR_TRANSPORT_ERROR; 1433 1434 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 1435 USB_STOR_XFER_GOOD) 1436 return USB_STOR_TRANSPORT_ERROR; 1437 1438 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 1439 USB_STOR_XFER_GOOD) 1440 return USB_STOR_TRANSPORT_ERROR; 1441 } 1442 1443 return USB_STOR_TRANSPORT_GOOD; 1444 } 1445 1446 /* 1447 * Initialize the USBAT processor and the storage device 1448 */ 1449 static int init_usbat(struct us_data *us, int devicetype) 1450 { 1451 int rc; 1452 struct usbat_info *info; 1453 unsigned char subcountH = USBAT_ATA_LBA_HI; 1454 unsigned char subcountL = USBAT_ATA_LBA_ME; 1455 unsigned char *status = us->iobuf; 1456 1457 us->extra = kzalloc(sizeof(struct usbat_info), GFP_NOIO); 1458 if (!us->extra) 1459 return -ENOMEM; 1460 1461 info = (struct usbat_info *) (us->extra); 1462 1463 /* Enable peripheral control signals */ 1464 rc = usbat_write_user_io(us, 1465 USBAT_UIO_OE1 | USBAT_UIO_OE0, 1466 USBAT_UIO_EPAD | USBAT_UIO_1); 1467 if (rc != USB_STOR_XFER_GOOD) 1468 return -EIO; 1469 1470 usb_stor_dbg(us, "INIT 1\n"); 1471 1472 msleep(2000); 1473 1474 rc = usbat_read_user_io(us, status); 1475 if (rc != USB_STOR_TRANSPORT_GOOD) 1476 return -EIO; 1477 1478 usb_stor_dbg(us, "INIT 2\n"); 1479 1480 rc = usbat_read_user_io(us, status); 1481 if (rc != USB_STOR_XFER_GOOD) 1482 return -EIO; 1483 1484 rc = usbat_read_user_io(us, status); 1485 if (rc != USB_STOR_XFER_GOOD) 1486 return -EIO; 1487 1488 usb_stor_dbg(us, "INIT 3\n"); 1489 1490 rc = usbat_select_and_test_registers(us); 1491 if (rc != USB_STOR_TRANSPORT_GOOD) 1492 return -EIO; 1493 1494 usb_stor_dbg(us, "INIT 4\n"); 1495 1496 rc = usbat_read_user_io(us, status); 1497 if (rc != USB_STOR_XFER_GOOD) 1498 return -EIO; 1499 1500 usb_stor_dbg(us, "INIT 5\n"); 1501 1502 /* Enable peripheral control signals and card detect */ 1503 rc = usbat_device_enable_cdt(us); 1504 if (rc != USB_STOR_TRANSPORT_GOOD) 1505 return -EIO; 1506 1507 usb_stor_dbg(us, "INIT 6\n"); 1508 1509 rc = usbat_read_user_io(us, status); 1510 if (rc != USB_STOR_XFER_GOOD) 1511 return -EIO; 1512 1513 usb_stor_dbg(us, "INIT 7\n"); 1514 1515 msleep(1400); 1516 1517 rc = usbat_read_user_io(us, status); 1518 if (rc != USB_STOR_XFER_GOOD) 1519 return -EIO; 1520 1521 usb_stor_dbg(us, "INIT 8\n"); 1522 1523 rc = usbat_select_and_test_registers(us); 1524 if (rc != USB_STOR_TRANSPORT_GOOD) 1525 return -EIO; 1526 1527 usb_stor_dbg(us, "INIT 9\n"); 1528 1529 /* At this point, we need to detect which device we are using */ 1530 if (usbat_set_transport(us, info, devicetype)) 1531 return -EIO; 1532 1533 usb_stor_dbg(us, "INIT 10\n"); 1534 1535 if (usbat_get_device_type(us) == USBAT_DEV_FLASH) { 1536 subcountH = 0x02; 1537 subcountL = 0x00; 1538 } 1539 rc = usbat_set_shuttle_features(us, (USBAT_FEAT_ETEN | USBAT_FEAT_ET2 | USBAT_FEAT_ET1), 1540 0x00, 0x88, 0x08, subcountH, subcountL); 1541 if (rc != USB_STOR_XFER_GOOD) 1542 return -EIO; 1543 1544 usb_stor_dbg(us, "INIT 11\n"); 1545 1546 return 0; 1547 } 1548 1549 /* 1550 * Transport for the HP 8200e 1551 */ 1552 static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) 1553 { 1554 int result; 1555 unsigned char *status = us->iobuf; 1556 unsigned char registers[32]; 1557 unsigned char data[32]; 1558 unsigned int len; 1559 int i; 1560 1561 len = scsi_bufflen(srb); 1562 1563 /* 1564 * Send A0 (ATA PACKET COMMAND). 1565 * Note: I guess we're never going to get any of the ATA 1566 * commands... just ATA Packet Commands. 1567 */ 1568 1569 registers[0] = USBAT_ATA_FEATURES; 1570 registers[1] = USBAT_ATA_SECCNT; 1571 registers[2] = USBAT_ATA_SECNUM; 1572 registers[3] = USBAT_ATA_LBA_ME; 1573 registers[4] = USBAT_ATA_LBA_HI; 1574 registers[5] = USBAT_ATA_DEVICE; 1575 registers[6] = USBAT_ATA_CMD; 1576 data[0] = 0x00; 1577 data[1] = 0x00; 1578 data[2] = 0x00; 1579 data[3] = len&0xFF; /* (cylL) = expected length (L) */ 1580 data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */ 1581 data[5] = 0xB0; /* (device sel) = slave */ 1582 data[6] = 0xA0; /* (command) = ATA PACKET COMMAND */ 1583 1584 for (i=7; i<19; i++) { 1585 registers[i] = 0x10; 1586 data[i] = (i-7 >= srb->cmd_len) ? 0 : srb->cmnd[i-7]; 1587 } 1588 1589 result = usbat_get_status(us, status); 1590 usb_stor_dbg(us, "Status = %02X\n", *status); 1591 if (result != USB_STOR_XFER_GOOD) 1592 return USB_STOR_TRANSPORT_ERROR; 1593 if (srb->cmnd[0] == TEST_UNIT_READY) 1594 transferred = 0; 1595 1596 if (srb->sc_data_direction == DMA_TO_DEVICE) { 1597 1598 result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, 1599 registers, data, 19, 1600 USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, 1601 (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), 1602 DMA_TO_DEVICE, 1603 scsi_sglist(srb), 1604 len, scsi_sg_count(srb), 10); 1605 1606 if (result == USB_STOR_TRANSPORT_GOOD) { 1607 transferred += len; 1608 usb_stor_dbg(us, "Wrote %08X bytes\n", transferred); 1609 } 1610 1611 return result; 1612 1613 } else if (srb->cmnd[0] == READ_10 || 1614 srb->cmnd[0] == GPCMD_READ_CD) { 1615 1616 return usbat_hp8200e_handle_read10(us, registers, data, srb); 1617 1618 } 1619 1620 if (len > 0xFFFF) { 1621 usb_stor_dbg(us, "Error: len = %08X... what do I do now?\n", 1622 len); 1623 return USB_STOR_TRANSPORT_ERROR; 1624 } 1625 1626 result = usbat_multiple_write(us, registers, data, 7); 1627 1628 if (result != USB_STOR_TRANSPORT_GOOD) 1629 return result; 1630 1631 /* 1632 * Write the 12-byte command header. 1633 * 1634 * If the command is BLANK then set the timer for 75 minutes. 1635 * Otherwise set it for 10 minutes. 1636 * 1637 * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW 1638 * AT SPEED 4 IS UNRELIABLE!!! 1639 */ 1640 1641 result = usbat_write_block(us, USBAT_ATA, srb->cmnd, 12, 1642 srb->cmnd[0] == GPCMD_BLANK ? 75 : 10, 0); 1643 1644 if (result != USB_STOR_TRANSPORT_GOOD) 1645 return result; 1646 1647 /* If there is response data to be read in then do it here. */ 1648 1649 if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) { 1650 1651 /* How many bytes to read in? Check cylL register */ 1652 1653 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 1654 USB_STOR_XFER_GOOD) { 1655 return USB_STOR_TRANSPORT_ERROR; 1656 } 1657 1658 if (len > 0xFF) { /* need to read cylH also */ 1659 len = *status; 1660 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != 1661 USB_STOR_XFER_GOOD) { 1662 return USB_STOR_TRANSPORT_ERROR; 1663 } 1664 len += ((unsigned int) *status)<<8; 1665 } 1666 else 1667 len = *status; 1668 1669 1670 result = usbat_read_block(us, scsi_sglist(srb), len, 1671 scsi_sg_count(srb)); 1672 } 1673 1674 return result; 1675 } 1676 1677 /* 1678 * Transport for USBAT02-based CompactFlash and similar storage devices 1679 */ 1680 static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) 1681 { 1682 int rc; 1683 struct usbat_info *info = (struct usbat_info *) (us->extra); 1684 unsigned long block, blocks; 1685 unsigned char *ptr = us->iobuf; 1686 static unsigned char inquiry_response[36] = { 1687 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 1688 }; 1689 1690 if (srb->cmnd[0] == INQUIRY) { 1691 usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); 1692 memcpy(ptr, inquiry_response, sizeof(inquiry_response)); 1693 fill_inquiry_response(us, ptr, 36); 1694 return USB_STOR_TRANSPORT_GOOD; 1695 } 1696 1697 if (srb->cmnd[0] == READ_CAPACITY) { 1698 rc = usbat_flash_check_media(us, info); 1699 if (rc != USB_STOR_TRANSPORT_GOOD) 1700 return rc; 1701 1702 rc = usbat_flash_get_sector_count(us, info); 1703 if (rc != USB_STOR_TRANSPORT_GOOD) 1704 return rc; 1705 1706 /* hard coded 512 byte sectors as per ATA spec */ 1707 info->ssize = 0x200; 1708 usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n", 1709 info->sectors, info->ssize); 1710 1711 /* 1712 * build the reply 1713 * note: must return the sector number of the last sector, 1714 * *not* the total number of sectors 1715 */ 1716 ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); 1717 ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); 1718 usb_stor_set_xfer_buf(ptr, 8, srb); 1719 1720 return USB_STOR_TRANSPORT_GOOD; 1721 } 1722 1723 if (srb->cmnd[0] == MODE_SELECT_10) { 1724 usb_stor_dbg(us, "Gah! MODE_SELECT_10\n"); 1725 return USB_STOR_TRANSPORT_ERROR; 1726 } 1727 1728 if (srb->cmnd[0] == READ_10) { 1729 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | 1730 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); 1731 1732 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); 1733 1734 usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n", 1735 block, blocks); 1736 return usbat_flash_read_data(us, info, block, blocks); 1737 } 1738 1739 if (srb->cmnd[0] == READ_12) { 1740 /* 1741 * I don't think we'll ever see a READ_12 but support it anyway 1742 */ 1743 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | 1744 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); 1745 1746 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | 1747 ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); 1748 1749 usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n", 1750 block, blocks); 1751 return usbat_flash_read_data(us, info, block, blocks); 1752 } 1753 1754 if (srb->cmnd[0] == WRITE_10) { 1755 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | 1756 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); 1757 1758 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); 1759 1760 usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n", 1761 block, blocks); 1762 return usbat_flash_write_data(us, info, block, blocks); 1763 } 1764 1765 if (srb->cmnd[0] == WRITE_12) { 1766 /* 1767 * I don't think we'll ever see a WRITE_12 but support it anyway 1768 */ 1769 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | 1770 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); 1771 1772 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | 1773 ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); 1774 1775 usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n", 1776 block, blocks); 1777 return usbat_flash_write_data(us, info, block, blocks); 1778 } 1779 1780 1781 if (srb->cmnd[0] == TEST_UNIT_READY) { 1782 usb_stor_dbg(us, "TEST_UNIT_READY\n"); 1783 1784 rc = usbat_flash_check_media(us, info); 1785 if (rc != USB_STOR_TRANSPORT_GOOD) 1786 return rc; 1787 1788 return usbat_check_status(us); 1789 } 1790 1791 if (srb->cmnd[0] == REQUEST_SENSE) { 1792 usb_stor_dbg(us, "REQUEST_SENSE\n"); 1793 1794 memset(ptr, 0, 18); 1795 ptr[0] = 0xF0; 1796 ptr[2] = info->sense_key; 1797 ptr[7] = 11; 1798 ptr[12] = info->sense_asc; 1799 ptr[13] = info->sense_ascq; 1800 usb_stor_set_xfer_buf(ptr, 18, srb); 1801 1802 return USB_STOR_TRANSPORT_GOOD; 1803 } 1804 1805 if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { 1806 /* 1807 * sure. whatever. not like we can stop the user from popping 1808 * the media out of the device (no locking doors, etc) 1809 */ 1810 return USB_STOR_TRANSPORT_GOOD; 1811 } 1812 1813 usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", 1814 srb->cmnd[0], srb->cmnd[0]); 1815 info->sense_key = 0x05; 1816 info->sense_asc = 0x20; 1817 info->sense_ascq = 0x00; 1818 return USB_STOR_TRANSPORT_FAILED; 1819 } 1820 1821 static int init_usbat_cd(struct us_data *us) 1822 { 1823 return init_usbat(us, USBAT_DEV_HP8200); 1824 } 1825 1826 static int init_usbat_flash(struct us_data *us) 1827 { 1828 return init_usbat(us, USBAT_DEV_FLASH); 1829 } 1830 1831 static struct scsi_host_template usbat_host_template; 1832 1833 static int usbat_probe(struct usb_interface *intf, 1834 const struct usb_device_id *id) 1835 { 1836 struct us_data *us; 1837 int result; 1838 1839 result = usb_stor_probe1(&us, intf, id, 1840 (id - usbat_usb_ids) + usbat_unusual_dev_list, 1841 &usbat_host_template); 1842 if (result) 1843 return result; 1844 1845 /* 1846 * The actual transport will be determined later by the 1847 * initialization routine; this is just a placeholder. 1848 */ 1849 us->transport_name = "Shuttle USBAT"; 1850 us->transport = usbat_flash_transport; 1851 us->transport_reset = usb_stor_CB_reset; 1852 us->max_lun = 0; 1853 1854 result = usb_stor_probe2(us); 1855 return result; 1856 } 1857 1858 static struct usb_driver usbat_driver = { 1859 .name = DRV_NAME, 1860 .probe = usbat_probe, 1861 .disconnect = usb_stor_disconnect, 1862 .suspend = usb_stor_suspend, 1863 .resume = usb_stor_resume, 1864 .reset_resume = usb_stor_reset_resume, 1865 .pre_reset = usb_stor_pre_reset, 1866 .post_reset = usb_stor_post_reset, 1867 .id_table = usbat_usb_ids, 1868 .soft_unbind = 1, 1869 .no_dynamic_id = 1, 1870 }; 1871 1872 module_usb_stor_driver(usbat_driver, usbat_host_template, DRV_NAME); 1873