1 /* Driver for SanDisk SDDR-55 SmartMedia reader 2 * 3 * SDDR55 driver v0.1: 4 * 5 * First release 6 * 7 * Current development and maintenance by: 8 * (c) 2002 Simon Munton 9 * 10 * This program is free software; you can redistribute it and/or modify it 11 * under the terms of the GNU General Public License as published by the 12 * Free Software Foundation; either version 2, or (at your option) any 13 * later version. 14 * 15 * This program is distributed in the hope that it will be useful, but 16 * WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 18 * General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License along 21 * with this program; if not, write to the Free Software Foundation, Inc., 22 * 675 Mass Ave, Cambridge, MA 02139, USA. 23 */ 24 25 #include <linux/jiffies.h> 26 #include <linux/errno.h> 27 #include <linux/module.h> 28 #include <linux/slab.h> 29 30 #include <scsi/scsi.h> 31 #include <scsi/scsi_cmnd.h> 32 33 #include "usb.h" 34 #include "transport.h" 35 #include "protocol.h" 36 #include "debug.h" 37 38 MODULE_DESCRIPTION("Driver for SanDisk SDDR-55 SmartMedia reader"); 39 MODULE_AUTHOR("Simon Munton"); 40 MODULE_LICENSE("GPL"); 41 42 /* 43 * The table of devices 44 */ 45 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ 46 vendorName, productName, useProtocol, useTransport, \ 47 initFunction, flags) \ 48 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ 49 .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } 50 51 static struct usb_device_id sddr55_usb_ids[] = { 52 # include "unusual_sddr55.h" 53 { } /* Terminating entry */ 54 }; 55 MODULE_DEVICE_TABLE(usb, sddr55_usb_ids); 56 57 #undef UNUSUAL_DEV 58 59 /* 60 * The flags table 61 */ 62 #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ 63 vendor_name, product_name, use_protocol, use_transport, \ 64 init_function, Flags) \ 65 { \ 66 .vendorName = vendor_name, \ 67 .productName = product_name, \ 68 .useProtocol = use_protocol, \ 69 .useTransport = use_transport, \ 70 .initFunction = init_function, \ 71 } 72 73 static struct us_unusual_dev sddr55_unusual_dev_list[] = { 74 # include "unusual_sddr55.h" 75 { } /* Terminating entry */ 76 }; 77 78 #undef UNUSUAL_DEV 79 80 81 #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) 82 #define LSB_of(s) ((s)&0xFF) 83 #define MSB_of(s) ((s)>>8) 84 #define PAGESIZE 512 85 86 #define set_sense_info(sk, asc, ascq) \ 87 do { \ 88 info->sense_data[2] = sk; \ 89 info->sense_data[12] = asc; \ 90 info->sense_data[13] = ascq; \ 91 } while (0) 92 93 94 struct sddr55_card_info { 95 unsigned long capacity; /* Size of card in bytes */ 96 int max_log_blks; /* maximum number of logical blocks */ 97 int pageshift; /* log2 of pagesize */ 98 int smallpageshift; /* 1 if pagesize == 256 */ 99 int blocksize; /* Size of block in pages */ 100 int blockshift; /* log2 of blocksize */ 101 int blockmask; /* 2^blockshift - 1 */ 102 int read_only; /* non zero if card is write protected */ 103 int force_read_only; /* non zero if we find a map error*/ 104 int *lba_to_pba; /* logical to physical map */ 105 int *pba_to_lba; /* physical to logical map */ 106 int fatal_error; /* set if we detect something nasty */ 107 unsigned long last_access; /* number of jiffies since we last talked to device */ 108 unsigned char sense_data[18]; 109 }; 110 111 112 #define NOT_ALLOCATED 0xffffffff 113 #define BAD_BLOCK 0xffff 114 #define CIS_BLOCK 0x400 115 #define UNUSED_BLOCK 0x3ff 116 117 static int 118 sddr55_bulk_transport(struct us_data *us, int direction, 119 unsigned char *data, unsigned int len) { 120 struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; 121 unsigned int pipe = (direction == DMA_FROM_DEVICE) ? 122 us->recv_bulk_pipe : us->send_bulk_pipe; 123 124 if (!len) 125 return USB_STOR_XFER_GOOD; 126 info->last_access = jiffies; 127 return usb_stor_bulk_transfer_buf(us, pipe, data, len, NULL); 128 } 129 130 /* check if card inserted, if there is, update read_only status 131 * return non zero if no card 132 */ 133 134 static int sddr55_status(struct us_data *us) 135 { 136 int result; 137 unsigned char *command = us->iobuf; 138 unsigned char *status = us->iobuf; 139 struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; 140 141 /* send command */ 142 memset(command, 0, 8); 143 command[5] = 0xB0; 144 command[7] = 0x80; 145 result = sddr55_bulk_transport(us, 146 DMA_TO_DEVICE, command, 8); 147 148 US_DEBUGP("Result for send_command in status %d\n", 149 result); 150 151 if (result != USB_STOR_XFER_GOOD) { 152 set_sense_info (4, 0, 0); /* hardware error */ 153 return USB_STOR_TRANSPORT_ERROR; 154 } 155 156 result = sddr55_bulk_transport(us, 157 DMA_FROM_DEVICE, status, 4); 158 159 /* expect to get short transfer if no card fitted */ 160 if (result == USB_STOR_XFER_SHORT || result == USB_STOR_XFER_STALLED) { 161 /* had a short transfer, no card inserted, free map memory */ 162 kfree(info->lba_to_pba); 163 kfree(info->pba_to_lba); 164 info->lba_to_pba = NULL; 165 info->pba_to_lba = NULL; 166 167 info->fatal_error = 0; 168 info->force_read_only = 0; 169 170 set_sense_info (2, 0x3a, 0); /* not ready, medium not present */ 171 return USB_STOR_TRANSPORT_FAILED; 172 } 173 174 if (result != USB_STOR_XFER_GOOD) { 175 set_sense_info (4, 0, 0); /* hardware error */ 176 return USB_STOR_TRANSPORT_FAILED; 177 } 178 179 /* check write protect status */ 180 info->read_only = (status[0] & 0x20); 181 182 /* now read status */ 183 result = sddr55_bulk_transport(us, 184 DMA_FROM_DEVICE, status, 2); 185 186 if (result != USB_STOR_XFER_GOOD) { 187 set_sense_info (4, 0, 0); /* hardware error */ 188 } 189 190 return (result == USB_STOR_XFER_GOOD ? 191 USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_FAILED); 192 } 193 194 195 static int sddr55_read_data(struct us_data *us, 196 unsigned int lba, 197 unsigned int page, 198 unsigned short sectors) { 199 200 int result = USB_STOR_TRANSPORT_GOOD; 201 unsigned char *command = us->iobuf; 202 unsigned char *status = us->iobuf; 203 struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; 204 unsigned char *buffer; 205 206 unsigned int pba; 207 unsigned long address; 208 209 unsigned short pages; 210 unsigned int len, offset; 211 struct scatterlist *sg; 212 213 // Since we only read in one block at a time, we have to create 214 // a bounce buffer and move the data a piece at a time between the 215 // bounce buffer and the actual transfer buffer. 216 217 len = min((unsigned int) sectors, (unsigned int) info->blocksize >> 218 info->smallpageshift) * PAGESIZE; 219 buffer = kmalloc(len, GFP_NOIO); 220 if (buffer == NULL) 221 return USB_STOR_TRANSPORT_ERROR; /* out of memory */ 222 offset = 0; 223 sg = NULL; 224 225 while (sectors>0) { 226 227 /* have we got to end? */ 228 if (lba >= info->max_log_blks) 229 break; 230 231 pba = info->lba_to_pba[lba]; 232 233 // Read as many sectors as possible in this block 234 235 pages = min((unsigned int) sectors << info->smallpageshift, 236 info->blocksize - page); 237 len = pages << info->pageshift; 238 239 US_DEBUGP("Read %02X pages, from PBA %04X" 240 " (LBA %04X) page %02X\n", 241 pages, pba, lba, page); 242 243 if (pba == NOT_ALLOCATED) { 244 /* no pba for this lba, fill with zeroes */ 245 memset (buffer, 0, len); 246 } else { 247 248 address = (pba << info->blockshift) + page; 249 250 command[0] = 0; 251 command[1] = LSB_of(address>>16); 252 command[2] = LSB_of(address>>8); 253 command[3] = LSB_of(address); 254 255 command[4] = 0; 256 command[5] = 0xB0; 257 command[6] = LSB_of(pages << (1 - info->smallpageshift)); 258 command[7] = 0x85; 259 260 /* send command */ 261 result = sddr55_bulk_transport(us, 262 DMA_TO_DEVICE, command, 8); 263 264 US_DEBUGP("Result for send_command in read_data %d\n", 265 result); 266 267 if (result != USB_STOR_XFER_GOOD) { 268 result = USB_STOR_TRANSPORT_ERROR; 269 goto leave; 270 } 271 272 /* read data */ 273 result = sddr55_bulk_transport(us, 274 DMA_FROM_DEVICE, buffer, len); 275 276 if (result != USB_STOR_XFER_GOOD) { 277 result = USB_STOR_TRANSPORT_ERROR; 278 goto leave; 279 } 280 281 /* now read status */ 282 result = sddr55_bulk_transport(us, 283 DMA_FROM_DEVICE, status, 2); 284 285 if (result != USB_STOR_XFER_GOOD) { 286 result = USB_STOR_TRANSPORT_ERROR; 287 goto leave; 288 } 289 290 /* check status for error */ 291 if (status[0] == 0xff && status[1] == 0x4) { 292 set_sense_info (3, 0x11, 0); 293 result = USB_STOR_TRANSPORT_FAILED; 294 goto leave; 295 } 296 } 297 298 // Store the data in the transfer buffer 299 usb_stor_access_xfer_buf(buffer, len, us->srb, 300 &sg, &offset, TO_XFER_BUF); 301 302 page = 0; 303 lba++; 304 sectors -= pages >> info->smallpageshift; 305 } 306 307 result = USB_STOR_TRANSPORT_GOOD; 308 309 leave: 310 kfree(buffer); 311 312 return result; 313 } 314 315 static int sddr55_write_data(struct us_data *us, 316 unsigned int lba, 317 unsigned int page, 318 unsigned short sectors) { 319 320 int result = USB_STOR_TRANSPORT_GOOD; 321 unsigned char *command = us->iobuf; 322 unsigned char *status = us->iobuf; 323 struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; 324 unsigned char *buffer; 325 326 unsigned int pba; 327 unsigned int new_pba; 328 unsigned long address; 329 330 unsigned short pages; 331 int i; 332 unsigned int len, offset; 333 struct scatterlist *sg; 334 335 /* check if we are allowed to write */ 336 if (info->read_only || info->force_read_only) { 337 set_sense_info (7, 0x27, 0); /* read only */ 338 return USB_STOR_TRANSPORT_FAILED; 339 } 340 341 // Since we only write one block at a time, we have to create 342 // a bounce buffer and move the data a piece at a time between the 343 // bounce buffer and the actual transfer buffer. 344 345 len = min((unsigned int) sectors, (unsigned int) info->blocksize >> 346 info->smallpageshift) * PAGESIZE; 347 buffer = kmalloc(len, GFP_NOIO); 348 if (buffer == NULL) 349 return USB_STOR_TRANSPORT_ERROR; 350 offset = 0; 351 sg = NULL; 352 353 while (sectors > 0) { 354 355 /* have we got to end? */ 356 if (lba >= info->max_log_blks) 357 break; 358 359 pba = info->lba_to_pba[lba]; 360 361 // Write as many sectors as possible in this block 362 363 pages = min((unsigned int) sectors << info->smallpageshift, 364 info->blocksize - page); 365 len = pages << info->pageshift; 366 367 // Get the data from the transfer buffer 368 usb_stor_access_xfer_buf(buffer, len, us->srb, 369 &sg, &offset, FROM_XFER_BUF); 370 371 US_DEBUGP("Write %02X pages, to PBA %04X" 372 " (LBA %04X) page %02X\n", 373 pages, pba, lba, page); 374 375 command[4] = 0; 376 377 if (pba == NOT_ALLOCATED) { 378 /* no pba allocated for this lba, find a free pba to use */ 379 380 int max_pba = (info->max_log_blks / 250 ) * 256; 381 int found_count = 0; 382 int found_pba = -1; 383 384 /* set pba to first block in zone lba is in */ 385 pba = (lba / 1000) * 1024; 386 387 US_DEBUGP("No PBA for LBA %04X\n",lba); 388 389 if (max_pba > 1024) 390 max_pba = 1024; 391 392 /* 393 * Scan through the map looking for an unused block 394 * leave 16 unused blocks at start (or as many as 395 * possible) since the sddr55 seems to reuse a used 396 * block when it shouldn't if we don't leave space. 397 */ 398 for (i = 0; i < max_pba; i++, pba++) { 399 if (info->pba_to_lba[pba] == UNUSED_BLOCK) { 400 found_pba = pba; 401 if (found_count++ > 16) 402 break; 403 } 404 } 405 406 pba = found_pba; 407 408 if (pba == -1) { 409 /* oh dear */ 410 US_DEBUGP("Couldn't find unallocated block\n"); 411 412 set_sense_info (3, 0x31, 0); /* medium error */ 413 result = USB_STOR_TRANSPORT_FAILED; 414 goto leave; 415 } 416 417 US_DEBUGP("Allocating PBA %04X for LBA %04X\n", pba, lba); 418 419 /* set writing to unallocated block flag */ 420 command[4] = 0x40; 421 } 422 423 address = (pba << info->blockshift) + page; 424 425 command[1] = LSB_of(address>>16); 426 command[2] = LSB_of(address>>8); 427 command[3] = LSB_of(address); 428 429 /* set the lba into the command, modulo 1000 */ 430 command[0] = LSB_of(lba % 1000); 431 command[6] = MSB_of(lba % 1000); 432 433 command[4] |= LSB_of(pages >> info->smallpageshift); 434 command[5] = 0xB0; 435 command[7] = 0x86; 436 437 /* send command */ 438 result = sddr55_bulk_transport(us, 439 DMA_TO_DEVICE, command, 8); 440 441 if (result != USB_STOR_XFER_GOOD) { 442 US_DEBUGP("Result for send_command in write_data %d\n", 443 result); 444 445 /* set_sense_info is superfluous here? */ 446 set_sense_info (3, 0x3, 0);/* peripheral write error */ 447 result = USB_STOR_TRANSPORT_FAILED; 448 goto leave; 449 } 450 451 /* send the data */ 452 result = sddr55_bulk_transport(us, 453 DMA_TO_DEVICE, buffer, len); 454 455 if (result != USB_STOR_XFER_GOOD) { 456 US_DEBUGP("Result for send_data in write_data %d\n", 457 result); 458 459 /* set_sense_info is superfluous here? */ 460 set_sense_info (3, 0x3, 0);/* peripheral write error */ 461 result = USB_STOR_TRANSPORT_FAILED; 462 goto leave; 463 } 464 465 /* now read status */ 466 result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, status, 6); 467 468 if (result != USB_STOR_XFER_GOOD) { 469 US_DEBUGP("Result for get_status in write_data %d\n", 470 result); 471 472 /* set_sense_info is superfluous here? */ 473 set_sense_info (3, 0x3, 0);/* peripheral write error */ 474 result = USB_STOR_TRANSPORT_FAILED; 475 goto leave; 476 } 477 478 new_pba = (status[3] + (status[4] << 8) + (status[5] << 16)) 479 >> info->blockshift; 480 481 /* check status for error */ 482 if (status[0] == 0xff && status[1] == 0x4) { 483 info->pba_to_lba[new_pba] = BAD_BLOCK; 484 485 set_sense_info (3, 0x0c, 0); 486 result = USB_STOR_TRANSPORT_FAILED; 487 goto leave; 488 } 489 490 US_DEBUGP("Updating maps for LBA %04X: old PBA %04X, new PBA %04X\n", 491 lba, pba, new_pba); 492 493 /* update the lba<->pba maps, note new_pba might be the same as pba */ 494 info->lba_to_pba[lba] = new_pba; 495 info->pba_to_lba[pba] = UNUSED_BLOCK; 496 497 /* check that new_pba wasn't already being used */ 498 if (info->pba_to_lba[new_pba] != UNUSED_BLOCK) { 499 printk(KERN_ERR "sddr55 error: new PBA %04X already in use for LBA %04X\n", 500 new_pba, info->pba_to_lba[new_pba]); 501 info->fatal_error = 1; 502 set_sense_info (3, 0x31, 0); 503 result = USB_STOR_TRANSPORT_FAILED; 504 goto leave; 505 } 506 507 /* update the pba<->lba maps for new_pba */ 508 info->pba_to_lba[new_pba] = lba % 1000; 509 510 page = 0; 511 lba++; 512 sectors -= pages >> info->smallpageshift; 513 } 514 result = USB_STOR_TRANSPORT_GOOD; 515 516 leave: 517 kfree(buffer); 518 return result; 519 } 520 521 static int sddr55_read_deviceID(struct us_data *us, 522 unsigned char *manufacturerID, 523 unsigned char *deviceID) { 524 525 int result; 526 unsigned char *command = us->iobuf; 527 unsigned char *content = us->iobuf; 528 529 memset(command, 0, 8); 530 command[5] = 0xB0; 531 command[7] = 0x84; 532 result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8); 533 534 US_DEBUGP("Result of send_control for device ID is %d\n", 535 result); 536 537 if (result != USB_STOR_XFER_GOOD) 538 return USB_STOR_TRANSPORT_ERROR; 539 540 result = sddr55_bulk_transport(us, 541 DMA_FROM_DEVICE, content, 4); 542 543 if (result != USB_STOR_XFER_GOOD) 544 return USB_STOR_TRANSPORT_ERROR; 545 546 *manufacturerID = content[0]; 547 *deviceID = content[1]; 548 549 if (content[0] != 0xff) { 550 result = sddr55_bulk_transport(us, 551 DMA_FROM_DEVICE, content, 2); 552 } 553 554 return USB_STOR_TRANSPORT_GOOD; 555 } 556 557 558 static int sddr55_reset(struct us_data *us) 559 { 560 return 0; 561 } 562 563 564 static unsigned long sddr55_get_capacity(struct us_data *us) { 565 566 unsigned char uninitialized_var(manufacturerID); 567 unsigned char uninitialized_var(deviceID); 568 int result; 569 struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; 570 571 US_DEBUGP("Reading capacity...\n"); 572 573 result = sddr55_read_deviceID(us, 574 &manufacturerID, 575 &deviceID); 576 577 US_DEBUGP("Result of read_deviceID is %d\n", 578 result); 579 580 if (result != USB_STOR_XFER_GOOD) 581 return 0; 582 583 US_DEBUGP("Device ID = %02X\n", deviceID); 584 US_DEBUGP("Manuf ID = %02X\n", manufacturerID); 585 586 info->pageshift = 9; 587 info->smallpageshift = 0; 588 info->blocksize = 16; 589 info->blockshift = 4; 590 info->blockmask = 15; 591 592 switch (deviceID) { 593 594 case 0x6e: // 1MB 595 case 0xe8: 596 case 0xec: 597 info->pageshift = 8; 598 info->smallpageshift = 1; 599 return 0x00100000; 600 601 case 0xea: // 2MB 602 case 0x64: 603 info->pageshift = 8; 604 info->smallpageshift = 1; 605 case 0x5d: // 5d is a ROM card with pagesize 512. 606 return 0x00200000; 607 608 case 0xe3: // 4MB 609 case 0xe5: 610 case 0x6b: 611 case 0xd5: 612 return 0x00400000; 613 614 case 0xe6: // 8MB 615 case 0xd6: 616 return 0x00800000; 617 618 case 0x73: // 16MB 619 info->blocksize = 32; 620 info->blockshift = 5; 621 info->blockmask = 31; 622 return 0x01000000; 623 624 case 0x75: // 32MB 625 info->blocksize = 32; 626 info->blockshift = 5; 627 info->blockmask = 31; 628 return 0x02000000; 629 630 case 0x76: // 64MB 631 info->blocksize = 32; 632 info->blockshift = 5; 633 info->blockmask = 31; 634 return 0x04000000; 635 636 case 0x79: // 128MB 637 info->blocksize = 32; 638 info->blockshift = 5; 639 info->blockmask = 31; 640 return 0x08000000; 641 642 default: // unknown 643 return 0; 644 645 } 646 } 647 648 static int sddr55_read_map(struct us_data *us) { 649 650 struct sddr55_card_info *info = (struct sddr55_card_info *)(us->extra); 651 int numblocks; 652 unsigned char *buffer; 653 unsigned char *command = us->iobuf; 654 int i; 655 unsigned short lba; 656 unsigned short max_lba; 657 int result; 658 659 if (!info->capacity) 660 return -1; 661 662 numblocks = info->capacity >> (info->blockshift + info->pageshift); 663 664 buffer = kmalloc( numblocks * 2, GFP_NOIO ); 665 666 if (!buffer) 667 return -1; 668 669 memset(command, 0, 8); 670 command[5] = 0xB0; 671 command[6] = numblocks * 2 / 256; 672 command[7] = 0x8A; 673 674 result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8); 675 676 if ( result != USB_STOR_XFER_GOOD) { 677 kfree (buffer); 678 return -1; 679 } 680 681 result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, buffer, numblocks * 2); 682 683 if ( result != USB_STOR_XFER_GOOD) { 684 kfree (buffer); 685 return -1; 686 } 687 688 result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, command, 2); 689 690 if ( result != USB_STOR_XFER_GOOD) { 691 kfree (buffer); 692 return -1; 693 } 694 695 kfree(info->lba_to_pba); 696 kfree(info->pba_to_lba); 697 info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_NOIO); 698 info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO); 699 700 if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) { 701 kfree(info->lba_to_pba); 702 kfree(info->pba_to_lba); 703 info->lba_to_pba = NULL; 704 info->pba_to_lba = NULL; 705 kfree(buffer); 706 return -1; 707 } 708 709 memset(info->lba_to_pba, 0xff, numblocks*sizeof(int)); 710 memset(info->pba_to_lba, 0xff, numblocks*sizeof(int)); 711 712 /* set maximum lba */ 713 max_lba = info->max_log_blks; 714 if (max_lba > 1000) 715 max_lba = 1000; 716 717 // Each block is 64 bytes of control data, so block i is located in 718 // scatterlist block i*64/128k = i*(2^6)*(2^-17) = i*(2^-11) 719 720 for (i=0; i<numblocks; i++) { 721 int zone = i / 1024; 722 723 lba = short_pack(buffer[i * 2], buffer[i * 2 + 1]); 724 725 /* Every 1024 physical blocks ("zone"), the LBA numbers 726 * go back to zero, but are within a higher 727 * block of LBA's. Also, there is a maximum of 728 * 1000 LBA's per zone. In other words, in PBA 729 * 1024-2047 you will find LBA 0-999 which are 730 * really LBA 1000-1999. Yes, this wastes 24 731 * physical blocks per zone. Go figure. 732 * These devices can have blocks go bad, so there 733 * are 24 spare blocks to use when blocks do go bad. 734 */ 735 736 /* SDDR55 returns 0xffff for a bad block, and 0x400 for the 737 * CIS block. (Is this true for cards 8MB or less??) 738 * Record these in the physical to logical map 739 */ 740 741 info->pba_to_lba[i] = lba; 742 743 if (lba >= max_lba) { 744 continue; 745 } 746 747 if (info->lba_to_pba[lba + zone * 1000] != NOT_ALLOCATED && 748 !info->force_read_only) { 749 printk(KERN_WARNING 750 "sddr55: map inconsistency at LBA %04X\n", 751 lba + zone * 1000); 752 info->force_read_only = 1; 753 } 754 755 if (lba<0x10 || (lba>=0x3E0 && lba<0x3EF)) 756 US_DEBUGP("LBA %04X <-> PBA %04X\n", lba, i); 757 758 info->lba_to_pba[lba + zone * 1000] = i; 759 } 760 761 kfree(buffer); 762 return 0; 763 } 764 765 766 static void sddr55_card_info_destructor(void *extra) { 767 struct sddr55_card_info *info = (struct sddr55_card_info *)extra; 768 769 if (!extra) 770 return; 771 772 kfree(info->lba_to_pba); 773 kfree(info->pba_to_lba); 774 } 775 776 777 /* 778 * Transport for the Sandisk SDDR-55 779 */ 780 static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) 781 { 782 int result; 783 static unsigned char inquiry_response[8] = { 784 0x00, 0x80, 0x00, 0x02, 0x1F, 0x00, 0x00, 0x00 785 }; 786 // write-protected for now, no block descriptor support 787 static unsigned char mode_page_01[20] = { 788 0x0, 0x12, 0x00, 0x80, 0x0, 0x0, 0x0, 0x0, 789 0x01, 0x0A, 790 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 791 }; 792 unsigned char *ptr = us->iobuf; 793 unsigned long capacity; 794 unsigned int lba; 795 unsigned int pba; 796 unsigned int page; 797 unsigned short pages; 798 struct sddr55_card_info *info; 799 800 if (!us->extra) { 801 us->extra = kzalloc( 802 sizeof(struct sddr55_card_info), GFP_NOIO); 803 if (!us->extra) 804 return USB_STOR_TRANSPORT_ERROR; 805 us->extra_destructor = sddr55_card_info_destructor; 806 } 807 808 info = (struct sddr55_card_info *)(us->extra); 809 810 if (srb->cmnd[0] == REQUEST_SENSE) { 811 US_DEBUGP("SDDR55: request sense %02x/%02x/%02x\n", info->sense_data[2], info->sense_data[12], info->sense_data[13]); 812 813 memcpy (ptr, info->sense_data, sizeof info->sense_data); 814 ptr[0] = 0x70; 815 ptr[7] = 11; 816 usb_stor_set_xfer_buf (ptr, sizeof info->sense_data, srb); 817 memset (info->sense_data, 0, sizeof info->sense_data); 818 819 return USB_STOR_TRANSPORT_GOOD; 820 } 821 822 memset (info->sense_data, 0, sizeof info->sense_data); 823 824 /* Dummy up a response for INQUIRY since SDDR55 doesn't 825 respond to INQUIRY commands */ 826 827 if (srb->cmnd[0] == INQUIRY) { 828 memcpy(ptr, inquiry_response, 8); 829 fill_inquiry_response(us, ptr, 36); 830 return USB_STOR_TRANSPORT_GOOD; 831 } 832 833 /* only check card status if the map isn't allocated, ie no card seen yet 834 * or if it's been over half a second since we last accessed it 835 */ 836 if (info->lba_to_pba == NULL || time_after(jiffies, info->last_access + HZ/2)) { 837 838 /* check to see if a card is fitted */ 839 result = sddr55_status (us); 840 if (result) { 841 result = sddr55_status (us); 842 if (!result) { 843 set_sense_info (6, 0x28, 0); /* new media, set unit attention, not ready to ready */ 844 } 845 return USB_STOR_TRANSPORT_FAILED; 846 } 847 } 848 849 /* if we detected a problem with the map when writing, 850 don't allow any more access */ 851 if (info->fatal_error) { 852 853 set_sense_info (3, 0x31, 0); 854 return USB_STOR_TRANSPORT_FAILED; 855 } 856 857 if (srb->cmnd[0] == READ_CAPACITY) { 858 859 capacity = sddr55_get_capacity(us); 860 861 if (!capacity) { 862 set_sense_info (3, 0x30, 0); /* incompatible medium */ 863 return USB_STOR_TRANSPORT_FAILED; 864 } 865 866 info->capacity = capacity; 867 868 /* figure out the maximum logical block number, allowing for 869 * the fact that only 250 out of every 256 are used */ 870 info->max_log_blks = ((info->capacity >> (info->pageshift + info->blockshift)) / 256) * 250; 871 872 /* Last page in the card, adjust as we only use 250 out of 873 * every 256 pages */ 874 capacity = (capacity / 256) * 250; 875 876 capacity /= PAGESIZE; 877 capacity--; 878 879 ((__be32 *) ptr)[0] = cpu_to_be32(capacity); 880 ((__be32 *) ptr)[1] = cpu_to_be32(PAGESIZE); 881 usb_stor_set_xfer_buf(ptr, 8, srb); 882 883 sddr55_read_map(us); 884 885 return USB_STOR_TRANSPORT_GOOD; 886 } 887 888 if (srb->cmnd[0] == MODE_SENSE_10) { 889 890 memcpy(ptr, mode_page_01, sizeof mode_page_01); 891 ptr[3] = (info->read_only || info->force_read_only) ? 0x80 : 0; 892 usb_stor_set_xfer_buf(ptr, sizeof(mode_page_01), srb); 893 894 if ( (srb->cmnd[2] & 0x3F) == 0x01 ) { 895 US_DEBUGP( 896 "SDDR55: Dummy up request for mode page 1\n"); 897 return USB_STOR_TRANSPORT_GOOD; 898 899 } else if ( (srb->cmnd[2] & 0x3F) == 0x3F ) { 900 US_DEBUGP( 901 "SDDR55: Dummy up request for all mode pages\n"); 902 return USB_STOR_TRANSPORT_GOOD; 903 } 904 905 set_sense_info (5, 0x24, 0); /* invalid field in command */ 906 return USB_STOR_TRANSPORT_FAILED; 907 } 908 909 if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { 910 911 US_DEBUGP( 912 "SDDR55: %s medium removal. Not that I can do" 913 " anything about it...\n", 914 (srb->cmnd[4]&0x03) ? "Prevent" : "Allow"); 915 916 return USB_STOR_TRANSPORT_GOOD; 917 918 } 919 920 if (srb->cmnd[0] == READ_10 || srb->cmnd[0] == WRITE_10) { 921 922 page = short_pack(srb->cmnd[3], srb->cmnd[2]); 923 page <<= 16; 924 page |= short_pack(srb->cmnd[5], srb->cmnd[4]); 925 pages = short_pack(srb->cmnd[8], srb->cmnd[7]); 926 927 page <<= info->smallpageshift; 928 929 // convert page to block and page-within-block 930 931 lba = page >> info->blockshift; 932 page = page & info->blockmask; 933 934 // locate physical block corresponding to logical block 935 936 if (lba >= info->max_log_blks) { 937 938 US_DEBUGP("Error: Requested LBA %04X exceeds maximum " 939 "block %04X\n", lba, info->max_log_blks-1); 940 941 set_sense_info (5, 0x24, 0); /* invalid field in command */ 942 943 return USB_STOR_TRANSPORT_FAILED; 944 } 945 946 pba = info->lba_to_pba[lba]; 947 948 if (srb->cmnd[0] == WRITE_10) { 949 US_DEBUGP("WRITE_10: write block %04X (LBA %04X) page %01X" 950 " pages %d\n", 951 pba, lba, page, pages); 952 953 return sddr55_write_data(us, lba, page, pages); 954 } else { 955 US_DEBUGP("READ_10: read block %04X (LBA %04X) page %01X" 956 " pages %d\n", 957 pba, lba, page, pages); 958 959 return sddr55_read_data(us, lba, page, pages); 960 } 961 } 962 963 964 if (srb->cmnd[0] == TEST_UNIT_READY) { 965 return USB_STOR_TRANSPORT_GOOD; 966 } 967 968 if (srb->cmnd[0] == START_STOP) { 969 return USB_STOR_TRANSPORT_GOOD; 970 } 971 972 set_sense_info (5, 0x20, 0); /* illegal command */ 973 974 return USB_STOR_TRANSPORT_FAILED; // FIXME: sense buffer? 975 } 976 977 978 static int sddr55_probe(struct usb_interface *intf, 979 const struct usb_device_id *id) 980 { 981 struct us_data *us; 982 int result; 983 984 result = usb_stor_probe1(&us, intf, id, 985 (id - sddr55_usb_ids) + sddr55_unusual_dev_list); 986 if (result) 987 return result; 988 989 us->transport_name = "SDDR55"; 990 us->transport = sddr55_transport; 991 us->transport_reset = sddr55_reset; 992 us->max_lun = 0; 993 994 result = usb_stor_probe2(us); 995 return result; 996 } 997 998 static struct usb_driver sddr55_driver = { 999 .name = "ums-sddr55", 1000 .probe = sddr55_probe, 1001 .disconnect = usb_stor_disconnect, 1002 .suspend = usb_stor_suspend, 1003 .resume = usb_stor_resume, 1004 .reset_resume = usb_stor_reset_resume, 1005 .pre_reset = usb_stor_pre_reset, 1006 .post_reset = usb_stor_post_reset, 1007 .id_table = sddr55_usb_ids, 1008 .soft_unbind = 1, 1009 .no_dynamic_id = 1, 1010 }; 1011 1012 module_usb_driver(sddr55_driver); 1013