1# 2# USB Storage driver configuration 3# 4 5comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" 6comment "also be needed; see USB_STORAGE Help for more info" 7 depends on USB 8 9config USB_STORAGE 10 tristate "USB Mass Storage support" 11 depends on USB && SCSI 12 ---help--- 13 Say Y here if you want to connect USB mass storage devices to your 14 computer's USB port. This is the driver you need for USB 15 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, 16 USB flash devices, and memory sticks, along with 17 similar devices. This driver may also be used for some cameras 18 and card readers. 19 20 This option depends on 'SCSI' support being enabled, but you 21 probably also need 'SCSI device support: SCSI disk support' 22 (BLK_DEV_SD) for most USB storage devices. 23 24 To compile this driver as a module, choose M here: the 25 module will be called usb-storage. 26 27config USB_STORAGE_DEBUG 28 bool "USB Mass Storage verbose debug" 29 depends on USB_STORAGE 30 help 31 Say Y here in order to have the USB Mass Storage code generate 32 verbose debugging messages. 33 34config USB_STORAGE_DATAFAB 35 tristate "Datafab Compact Flash Reader support" 36 depends on USB_STORAGE 37 help 38 Support for certain Datafab CompactFlash readers. 39 Datafab has a web page at <http://www.datafabusa.com/>. 40 41 If this driver is compiled as a module, it will be named ums-datafab. 42 43config USB_STORAGE_FREECOM 44 tristate "Freecom USB/ATAPI Bridge support" 45 depends on USB_STORAGE 46 help 47 Support for the Freecom USB to IDE/ATAPI adaptor. 48 Freecom has a web page at <http://www.freecom.de/>. 49 50 If this driver is compiled as a module, it will be named ums-freecom. 51 52config USB_STORAGE_ISD200 53 tristate "ISD-200 USB/ATA Bridge support" 54 depends on USB_STORAGE 55 ---help--- 56 Say Y here if you want to use USB Mass Store devices based 57 on the In-Systems Design ISD-200 USB/ATA bridge. 58 59 Some of the products that use this chip are: 60 61 - Archos Jukebox 6000 62 - ISD SmartCable for Storage 63 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge 64 - Sony CRX10U CD-R/RW drive 65 - CyQ've CQ8060A CDRW drive 66 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) 67 68 If this driver is compiled as a module, it will be named ums-isd200. 69 70config USB_STORAGE_USBAT 71 tristate "USBAT/USBAT02-based storage support" 72 depends on USB_STORAGE 73 help 74 Say Y here to include additional code to support storage devices 75 based on the SCM/Shuttle USBAT/USBAT02 processors. 76 77 Devices reported to work with this driver include: 78 - CompactFlash reader included with Kodak DC3800 camera 79 - Dane-Elec Zmate CompactFlash reader 80 - Delkin Efilm reader2 81 - HP 8200e/8210e/8230e CD-Writer Plus drives 82 - I-JAM JS-50U 83 - Jessops CompactFlash JESDCFRU BLACK 84 - Kingston Technology PCREAD-USB/CF 85 - Maxell UA4 CompactFlash reader 86 - Memorex UCF-100 87 - Microtech ZiO! ICS-45 CF2 88 - RCA LYRA MP3 portable 89 - Sandisk ImageMate SDDR-05b 90 91 If this driver is compiled as a module, it will be named ums-usbat. 92 93config USB_STORAGE_SDDR09 94 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" 95 depends on USB_STORAGE 96 help 97 Say Y here to include additional code to support the Sandisk SDDR-09 98 SmartMedia reader in the USB Mass Storage driver. 99 Also works for the Microtech Zio! CompactFlash/SmartMedia reader. 100 101 If this driver is compiled as a module, it will be named ums-sddr09. 102 103config USB_STORAGE_SDDR55 104 tristate "SanDisk SDDR-55 SmartMedia support" 105 depends on USB_STORAGE 106 help 107 Say Y here to include additional code to support the Sandisk SDDR-55 108 SmartMedia reader in the USB Mass Storage driver. 109 110 If this driver is compiled as a module, it will be named ums-sddr55. 111 112config USB_STORAGE_JUMPSHOT 113 tristate "Lexar Jumpshot Compact Flash Reader" 114 depends on USB_STORAGE 115 help 116 Say Y here to include additional code to support the Lexar Jumpshot 117 USB CompactFlash reader. 118 119 If this driver is compiled as a module, it will be named ums-jumpshot. 120 121config USB_STORAGE_ALAUDA 122 tristate "Olympus MAUSB-10/Fuji DPC-R1 support" 123 depends on USB_STORAGE 124 help 125 Say Y here to include additional code to support the Olympus MAUSB-10 126 and Fujifilm DPC-R1 USB Card reader/writer devices. 127 128 These devices are based on the Alauda chip and support both 129 XD and SmartMedia cards. 130 131 If this driver is compiled as a module, it will be named ums-alauda. 132 133config USB_STORAGE_ONETOUCH 134 bool "Support OneTouch Button on Maxtor Hard Drives" 135 depends on USB_STORAGE 136 depends on INPUT=y || INPUT=USB_STORAGE 137 help 138 Say Y here to include additional code to support the Maxtor OneTouch 139 USB hard drive's onetouch button. 140 141 This code registers the button on the front of Maxtor OneTouch USB 142 hard drive's as an input device. An action can be associated with 143 this input in any keybinding software. (e.g. gnome's keyboard short- 144 cuts) 145 146config USB_STORAGE_KARMA 147 bool "Support for Rio Karma music player" 148 depends on USB_STORAGE 149 help 150 Say Y here to include additional code to support the Rio Karma 151 USB interface. 152 153 This code places the Rio Karma into mass storage mode, enabling 154 it to be mounted as an ordinary filesystem. Performing an eject 155 on the resulting scsi device node returns the Karma to normal 156 operation. 157 158config USB_STORAGE_CYPRESS_ATACB 159 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" 160 depends on USB_STORAGE 161 ---help--- 162 Say Y here if you want to use SAT (ata pass through) on devices based 163 on the Cypress USB/ATA bridge supporting ATACB. This will allow you 164 to use tools to tune and monitor your drive (like hdparm or smartctl). 165 166 If you say no here your device will still work with the standard usb 167 mass storage class. 168 169 If this driver is compiled as a module, it will be named ums-cypress. 170 171config USB_LIBUSUAL 172 bool "The shared table of common (or usual) storage devices" 173 depends on USB 174 help 175 This module contains a table of common (or usual) devices 176 for usb-storage and ub drivers, and allows to switch binding 177 of these devices without rebuilding modules. 178 179 Typical syntax of /etc/modprobe.conf is: 180 181 options libusual bias="ub" 182 183 If unsure, say N. 184