1# 2# USB Storage driver configuration 3# 4 5comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'" 6comment "may also be needed; see USB_STORAGE Help for more information" 7 depends on USB 8 9config USB_STORAGE 10 tristate "USB Mass Storage support" 11 depends on USB 12 select SCSI 13 ---help--- 14 Say Y here if you want to connect USB mass storage devices to your 15 computer's USB port. This is the driver you need for USB 16 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, 17 USB flash devices, and memory sticks, along with 18 similar devices. This driver may also be used for some cameras 19 and card readers. 20 21 This option 'selects' (turns on, enables) 'SCSI', but you 22 probably also need 'SCSI device support: SCSI disk support' 23 (BLK_DEV_SD) for most USB storage devices. 24 25 To compile this driver as a module, choose M here: the 26 module will be called usb-storage. 27 28config USB_STORAGE_DEBUG 29 bool "USB Mass Storage verbose debug" 30 depends on USB_STORAGE 31 help 32 Say Y here in order to have the USB Mass Storage code generate 33 verbose debugging messages. 34 35config USB_STORAGE_DATAFAB 36 bool "Datafab Compact Flash Reader support (EXPERIMENTAL)" 37 depends on USB_STORAGE && EXPERIMENTAL 38 help 39 Support for certain Datafab CompactFlash readers. 40 Datafab has a web page at <http://www.datafabusa.com/>. 41 42config USB_STORAGE_FREECOM 43 bool "Freecom USB/ATAPI Bridge support" 44 depends on USB_STORAGE 45 help 46 Support for the Freecom USB to IDE/ATAPI adaptor. 47 Freecom has a web page at <http://www.freecom.de/>. 48 49config USB_STORAGE_ISD200 50 bool "ISD-200 USB/ATA Bridge support" 51 depends on USB_STORAGE && BLK_DEV_IDE 52 ---help--- 53 Say Y here if you want to use USB Mass Store devices based 54 on the In-Systems Design ISD-200 USB/ATA bridge. 55 56 Some of the products that use this chip are: 57 58 - Archos Jukebox 6000 59 - ISD SmartCable for Storage 60 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge 61 - Sony CRX10U CD-R/RW drive 62 - CyQ've CQ8060A CDRW drive 63 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) 64 65config USB_STORAGE_DPCM 66 bool "Microtech/ZiO! CompactFlash/SmartMedia support" 67 depends on USB_STORAGE 68 help 69 Say Y here to support the Microtech/ZiO! CompactFlash reader. 70 There is a web page at <http://www.ziocorp.com/products/>. 71 72config USB_STORAGE_USBAT 73 bool "USBAT/USBAT02-based storage support (EXPERIMENTAL)" 74 depends on USB_STORAGE && EXPERIMENTAL 75 help 76 Say Y here to include additional code to support storage devices 77 based on the SCM/Shuttle USBAT/USBAT02 processors. 78 79 Devices reported to work with this driver include: 80 - CompactFlash reader included with Kodak DC3800 camera 81 - Dane-Elec Zmate CompactFlash reader 82 - Delkin Efilm reader2 83 - HP 8200e/8210e/8230e CD-Writer Plus drives 84 - I-JAM JS-50U 85 - Jessops CompactFlash JESDCFRU BLACK 86 - Kingston Technology PCREAD-USB/CF 87 - Maxell UA4 CompactFlash reader 88 - Memorex UCF-100 89 - Microtech ZiO! ICS-45 CF2 90 - RCA LYRA MP3 portable 91 - Sandisk ImageMate SDDR-05b 92 93config USB_STORAGE_SDDR09 94 bool "SanDisk SDDR-09 (and other SmartMedia) support (EXPERIMENTAL)" 95 depends on USB_STORAGE && EXPERIMENTAL 96 help 97 Say Y here to include additional code to support the Sandisk SDDR-09 98 SmartMedia reader in the USB Mass Storage driver. 99 Also works for the Microtech Zio! SmartMedia reader. 100 101config USB_STORAGE_SDDR55 102 bool "SanDisk SDDR-55 SmartMedia support (EXPERIMENTAL)" 103 depends on USB_STORAGE && EXPERIMENTAL 104 help 105 Say Y here to include additional code to support the Sandisk SDDR-55 106 SmartMedia reader in the USB Mass Storage driver. 107 108config USB_STORAGE_JUMPSHOT 109 bool "Lexar Jumpshot Compact Flash Reader (EXPERIMENTAL)" 110 depends on USB_STORAGE && EXPERIMENTAL 111 help 112 Say Y here to include additional code to support the Lexar Jumpshot 113 USB CompactFlash reader. 114 115 116config USB_STORAGE_ONETOUCH 117 bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)" 118 depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL && !PM 119 help 120 Say Y here to include additional code to support the Maxtor OneTouch 121 USB hard drive's onetouch button. 122 123 This code registers the button on the front of Maxtor OneTouch USB 124 hard drive's as an input device. An action can be associated with 125 this input in any keybinding software. (e.g. gnome's keyboard short- 126 cuts) 127