1# 2# USB Storage driver configuration 3# 4 5comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" 6comment "also be needed; see USB_STORAGE Help for more info" 7 depends on USB 8 9config USB_STORAGE 10 tristate "USB Mass Storage support" 11 depends on USB && SCSI 12 ---help--- 13 Say Y here if you want to connect USB mass storage devices to your 14 computer's USB port. This is the driver you need for USB 15 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, 16 USB flash devices, and memory sticks, along with 17 similar devices. This driver may also be used for some cameras 18 and card readers. 19 20 This option depends on 'SCSI' support being enabled, but you 21 probably also need 'SCSI device support: SCSI disk support' 22 (BLK_DEV_SD) for most USB storage devices. 23 24 To compile this driver as a module, choose M here: the 25 module will be called usb-storage. 26 27config USB_STORAGE_DEBUG 28 bool "USB Mass Storage verbose debug" 29 depends on USB_STORAGE 30 help 31 Say Y here in order to have the USB Mass Storage code generate 32 verbose debugging messages. 33 34config USB_STORAGE_REALTEK 35 tristate "Realtek Card Reader support" 36 depends on USB_STORAGE 37 help 38 Say Y here to include additional code to support the power-saving function 39 for Realtek RTS51xx USB card readers. 40 41 If this driver is compiled as a module, it will be named ums-realtek. 42 43config REALTEK_AUTOPM 44 bool "Realtek Card Reader autosuspend support" 45 depends on USB_STORAGE_REALTEK && PM_RUNTIME 46 default y 47 48config USB_STORAGE_DATAFAB 49 tristate "Datafab Compact Flash Reader support" 50 depends on USB_STORAGE 51 help 52 Support for certain Datafab CompactFlash readers. 53 Datafab has a web page at <http://www.datafab.com/>. 54 55 If this driver is compiled as a module, it will be named ums-datafab. 56 57config USB_STORAGE_FREECOM 58 tristate "Freecom USB/ATAPI Bridge support" 59 depends on USB_STORAGE 60 help 61 Support for the Freecom USB to IDE/ATAPI adaptor. 62 Freecom has a web page at <http://www.freecom.de/>. 63 64 If this driver is compiled as a module, it will be named ums-freecom. 65 66config USB_STORAGE_ISD200 67 tristate "ISD-200 USB/ATA Bridge support" 68 depends on USB_STORAGE 69 ---help--- 70 Say Y here if you want to use USB Mass Store devices based 71 on the In-Systems Design ISD-200 USB/ATA bridge. 72 73 Some of the products that use this chip are: 74 75 - Archos Jukebox 6000 76 - ISD SmartCable for Storage 77 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge 78 - Sony CRX10U CD-R/RW drive 79 - CyQ've CQ8060A CDRW drive 80 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) 81 82 If this driver is compiled as a module, it will be named ums-isd200. 83 84config USB_STORAGE_USBAT 85 tristate "USBAT/USBAT02-based storage support" 86 depends on USB_STORAGE 87 help 88 Say Y here to include additional code to support storage devices 89 based on the SCM/Shuttle USBAT/USBAT02 processors. 90 91 Devices reported to work with this driver include: 92 - CompactFlash reader included with Kodak DC3800 camera 93 - Dane-Elec Zmate CompactFlash reader 94 - Delkin Efilm reader2 95 - HP 8200e/8210e/8230e CD-Writer Plus drives 96 - I-JAM JS-50U 97 - Jessops CompactFlash JESDCFRU BLACK 98 - Kingston Technology PCREAD-USB/CF 99 - Maxell UA4 CompactFlash reader 100 - Memorex UCF-100 101 - Microtech ZiO! ICS-45 CF2 102 - RCA LYRA MP3 portable 103 - Sandisk ImageMate SDDR-05b 104 105 If this driver is compiled as a module, it will be named ums-usbat. 106 107config USB_STORAGE_SDDR09 108 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" 109 depends on USB_STORAGE 110 help 111 Say Y here to include additional code to support the Sandisk SDDR-09 112 SmartMedia reader in the USB Mass Storage driver. 113 Also works for the Microtech Zio! CompactFlash/SmartMedia reader. 114 115 If this driver is compiled as a module, it will be named ums-sddr09. 116 117config USB_STORAGE_SDDR55 118 tristate "SanDisk SDDR-55 SmartMedia support" 119 depends on USB_STORAGE 120 help 121 Say Y here to include additional code to support the Sandisk SDDR-55 122 SmartMedia reader in the USB Mass Storage driver. 123 124 If this driver is compiled as a module, it will be named ums-sddr55. 125 126config USB_STORAGE_JUMPSHOT 127 tristate "Lexar Jumpshot Compact Flash Reader" 128 depends on USB_STORAGE 129 help 130 Say Y here to include additional code to support the Lexar Jumpshot 131 USB CompactFlash reader. 132 133 If this driver is compiled as a module, it will be named ums-jumpshot. 134 135config USB_STORAGE_ALAUDA 136 tristate "Olympus MAUSB-10/Fuji DPC-R1 support" 137 depends on USB_STORAGE 138 help 139 Say Y here to include additional code to support the Olympus MAUSB-10 140 and Fujifilm DPC-R1 USB Card reader/writer devices. 141 142 These devices are based on the Alauda chip and support both 143 XD and SmartMedia cards. 144 145 If this driver is compiled as a module, it will be named ums-alauda. 146 147config USB_STORAGE_ONETOUCH 148 tristate "Support OneTouch Button on Maxtor Hard Drives" 149 depends on USB_STORAGE 150 depends on INPUT=y || INPUT=USB_STORAGE 151 help 152 Say Y here to include additional code to support the Maxtor OneTouch 153 USB hard drive's onetouch button. 154 155 This code registers the button on the front of Maxtor OneTouch USB 156 hard drive's as an input device. An action can be associated with 157 this input in any keybinding software. (e.g. gnome's keyboard short- 158 cuts) 159 160 If this driver is compiled as a module, it will be named ums-onetouch. 161 162config USB_STORAGE_KARMA 163 tristate "Support for Rio Karma music player" 164 depends on USB_STORAGE 165 help 166 Say Y here to include additional code to support the Rio Karma 167 USB interface. 168 169 This code places the Rio Karma into mass storage mode, enabling 170 it to be mounted as an ordinary filesystem. Performing an eject 171 on the resulting scsi device node returns the Karma to normal 172 operation. 173 174 If this driver is compiled as a module, it will be named ums-karma. 175 176config USB_STORAGE_CYPRESS_ATACB 177 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" 178 depends on USB_STORAGE 179 ---help--- 180 Say Y here if you want to use SAT (ata pass through) on devices based 181 on the Cypress USB/ATA bridge supporting ATACB. This will allow you 182 to use tools to tune and monitor your drive (like hdparm or smartctl). 183 184 If you say no here your device will still work with the standard usb 185 mass storage class. 186 187 If this driver is compiled as a module, it will be named ums-cypress. 188 189config USB_STORAGE_ENE_UB6250 190 tristate "USB ENE card reader support" 191 depends on USB && SCSI 192 depends on USB_STORAGE 193 ---help--- 194 Say Y here if you wish to control a ENE SD/MS Card reader. 195 To use SM card, please build driver/staging/keucr/keucr.ko 196 197 This option depends on 'SCSI' support being enabled, but you 198 probably also need 'SCSI device support: SCSI disk support' 199 (BLK_DEV_SD) for most USB storage devices. 200 201 To compile this driver as a module, choose M here: the 202 module will be called ums-eneub6250. 203 204config USB_UAS 205 tristate "USB Attached SCSI" 206 depends on USB && SCSI 207 help 208 The USB Attached SCSI protocol is supported by some USB 209 storage devices. It permits higher performance by supporting 210 multiple outstanding commands. 211 212 If you don't know whether you have a UAS device, it is safe to 213 say 'Y' or 'M' here and the kernel will use the right driver. 214 215 If you compile this driver as a module, it will be named uas. 216