1# 2# USB Storage driver configuration 3# 4 5comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" 6comment "also be needed; see USB_STORAGE Help for more info" 7 depends on USB 8 9config USB_STORAGE 10 tristate "USB Mass Storage support" 11 depends on USB && SCSI 12 ---help--- 13 Say Y here if you want to connect USB mass storage devices to your 14 computer's USB port. This is the driver you need for USB 15 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, 16 USB flash devices, and memory sticks, along with 17 similar devices. This driver may also be used for some cameras 18 and card readers. 19 20 This option depends on 'SCSI' support being enabled, but you 21 probably also need 'SCSI device support: SCSI disk support' 22 (BLK_DEV_SD) for most USB storage devices. 23 24 To compile this driver as a module, choose M here: the 25 module will be called usb-storage. 26 27config USB_STORAGE_DEBUG 28 bool "USB Mass Storage verbose debug" 29 depends on USB_STORAGE 30 help 31 Say Y here in order to have the USB Mass Storage code generate 32 verbose debugging messages. 33 34config USB_STORAGE_DATAFAB 35 bool "Datafab Compact Flash Reader support" 36 depends on USB_STORAGE 37 help 38 Support for certain Datafab CompactFlash readers. 39 Datafab has a web page at <http://www.datafabusa.com/>. 40 41config USB_STORAGE_FREECOM 42 bool "Freecom USB/ATAPI Bridge support" 43 depends on USB_STORAGE 44 help 45 Support for the Freecom USB to IDE/ATAPI adaptor. 46 Freecom has a web page at <http://www.freecom.de/>. 47 48config USB_STORAGE_ISD200 49 tristate "ISD-200 USB/ATA Bridge support" 50 depends on USB_STORAGE 51 ---help--- 52 Say Y here if you want to use USB Mass Store devices based 53 on the In-Systems Design ISD-200 USB/ATA bridge. 54 55 Some of the products that use this chip are: 56 57 - Archos Jukebox 6000 58 - ISD SmartCable for Storage 59 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge 60 - Sony CRX10U CD-R/RW drive 61 - CyQ've CQ8060A CDRW drive 62 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) 63 64 If this driver is compiled as a module, it will be named ums-isd200. 65 66config USB_STORAGE_USBAT 67 tristate "USBAT/USBAT02-based storage support" 68 depends on USB_STORAGE 69 help 70 Say Y here to include additional code to support storage devices 71 based on the SCM/Shuttle USBAT/USBAT02 processors. 72 73 Devices reported to work with this driver include: 74 - CompactFlash reader included with Kodak DC3800 camera 75 - Dane-Elec Zmate CompactFlash reader 76 - Delkin Efilm reader2 77 - HP 8200e/8210e/8230e CD-Writer Plus drives 78 - I-JAM JS-50U 79 - Jessops CompactFlash JESDCFRU BLACK 80 - Kingston Technology PCREAD-USB/CF 81 - Maxell UA4 CompactFlash reader 82 - Memorex UCF-100 83 - Microtech ZiO! ICS-45 CF2 84 - RCA LYRA MP3 portable 85 - Sandisk ImageMate SDDR-05b 86 87 If this driver is compiled as a module, it will be named ums-usbat. 88 89config USB_STORAGE_SDDR09 90 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" 91 depends on USB_STORAGE 92 help 93 Say Y here to include additional code to support the Sandisk SDDR-09 94 SmartMedia reader in the USB Mass Storage driver. 95 Also works for the Microtech Zio! CompactFlash/SmartMedia reader. 96 97 If this driver is compiled as a module, it will be named ums-sddr09. 98 99config USB_STORAGE_SDDR55 100 tristate "SanDisk SDDR-55 SmartMedia support" 101 depends on USB_STORAGE 102 help 103 Say Y here to include additional code to support the Sandisk SDDR-55 104 SmartMedia reader in the USB Mass Storage driver. 105 106 If this driver is compiled as a module, it will be named ums-sddr55. 107 108config USB_STORAGE_JUMPSHOT 109 bool "Lexar Jumpshot Compact Flash Reader" 110 depends on USB_STORAGE 111 help 112 Say Y here to include additional code to support the Lexar Jumpshot 113 USB CompactFlash reader. 114 115config USB_STORAGE_ALAUDA 116 bool "Olympus MAUSB-10/Fuji DPC-R1 support" 117 depends on USB_STORAGE 118 help 119 Say Y here to include additional code to support the Olympus MAUSB-10 120 and Fujifilm DPC-R1 USB Card reader/writer devices. 121 122 These devices are based on the Alauda chip and support both 123 XD and SmartMedia cards. 124 125config USB_STORAGE_ONETOUCH 126 bool "Support OneTouch Button on Maxtor Hard Drives" 127 depends on USB_STORAGE 128 depends on INPUT=y || INPUT=USB_STORAGE 129 help 130 Say Y here to include additional code to support the Maxtor OneTouch 131 USB hard drive's onetouch button. 132 133 This code registers the button on the front of Maxtor OneTouch USB 134 hard drive's as an input device. An action can be associated with 135 this input in any keybinding software. (e.g. gnome's keyboard short- 136 cuts) 137 138config USB_STORAGE_KARMA 139 bool "Support for Rio Karma music player" 140 depends on USB_STORAGE 141 help 142 Say Y here to include additional code to support the Rio Karma 143 USB interface. 144 145 This code places the Rio Karma into mass storage mode, enabling 146 it to be mounted as an ordinary filesystem. Performing an eject 147 on the resulting scsi device node returns the Karma to normal 148 operation. 149 150config USB_STORAGE_CYPRESS_ATACB 151 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" 152 depends on USB_STORAGE 153 ---help--- 154 Say Y here if you want to use SAT (ata pass through) on devices based 155 on the Cypress USB/ATA bridge supporting ATACB. This will allow you 156 to use tools to tune and monitor your drive (like hdparm or smartctl). 157 158 If you say no here your device will still work with the standard usb 159 mass storage class. 160 161 If this driver is compiled as a module, it will be named ums-cypress. 162 163config USB_LIBUSUAL 164 bool "The shared table of common (or usual) storage devices" 165 depends on USB 166 help 167 This module contains a table of common (or usual) devices 168 for usb-storage and ub drivers, and allows to switch binding 169 of these devices without rebuilding modules. 170 171 Typical syntax of /etc/modprobe.conf is: 172 173 options libusual bias="ub" 174 175 If unsure, say N. 176