1# 2# USB Storage driver configuration 3# 4 5comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" 6comment "also be needed; see USB_STORAGE Help for more info" 7 depends on USB 8 9config USB_STORAGE 10 tristate "USB Mass Storage support" 11 depends on USB && SCSI 12 ---help--- 13 Say Y here if you want to connect USB mass storage devices to your 14 computer's USB port. This is the driver you need for USB 15 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, 16 USB flash devices, and memory sticks, along with 17 similar devices. This driver may also be used for some cameras 18 and card readers. 19 20 This option depends on 'SCSI' support being enabled, but you 21 probably also need 'SCSI device support: SCSI disk support' 22 (BLK_DEV_SD) for most USB storage devices. 23 24 To compile this driver as a module, choose M here: the 25 module will be called usb-storage. 26 27config USB_STORAGE_DEBUG 28 bool "USB Mass Storage verbose debug" 29 depends on USB_STORAGE 30 help 31 Say Y here in order to have the USB Mass Storage code generate 32 verbose debugging messages. 33 34config USB_STORAGE_DATAFAB 35 bool "Datafab Compact Flash Reader support" 36 depends on USB_STORAGE 37 help 38 Support for certain Datafab CompactFlash readers. 39 Datafab has a web page at <http://www.datafabusa.com/>. 40 41config USB_STORAGE_FREECOM 42 bool "Freecom USB/ATAPI Bridge support" 43 depends on USB_STORAGE 44 help 45 Support for the Freecom USB to IDE/ATAPI adaptor. 46 Freecom has a web page at <http://www.freecom.de/>. 47 48config USB_STORAGE_ISD200 49 bool "ISD-200 USB/ATA Bridge support" 50 depends on USB_STORAGE 51 ---help--- 52 Say Y here if you want to use USB Mass Store devices based 53 on the In-Systems Design ISD-200 USB/ATA bridge. 54 55 Some of the products that use this chip are: 56 57 - Archos Jukebox 6000 58 - ISD SmartCable for Storage 59 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge 60 - Sony CRX10U CD-R/RW drive 61 - CyQ've CQ8060A CDRW drive 62 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) 63 64config USB_STORAGE_USBAT 65 bool "USBAT/USBAT02-based storage support" 66 depends on USB_STORAGE 67 help 68 Say Y here to include additional code to support storage devices 69 based on the SCM/Shuttle USBAT/USBAT02 processors. 70 71 Devices reported to work with this driver include: 72 - CompactFlash reader included with Kodak DC3800 camera 73 - Dane-Elec Zmate CompactFlash reader 74 - Delkin Efilm reader2 75 - HP 8200e/8210e/8230e CD-Writer Plus drives 76 - I-JAM JS-50U 77 - Jessops CompactFlash JESDCFRU BLACK 78 - Kingston Technology PCREAD-USB/CF 79 - Maxell UA4 CompactFlash reader 80 - Memorex UCF-100 81 - Microtech ZiO! ICS-45 CF2 82 - RCA LYRA MP3 portable 83 - Sandisk ImageMate SDDR-05b 84 85config USB_STORAGE_SDDR09 86 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" 87 depends on USB_STORAGE 88 help 89 Say Y here to include additional code to support the Sandisk SDDR-09 90 SmartMedia reader in the USB Mass Storage driver. 91 Also works for the Microtech Zio! CompactFlash/SmartMedia reader. 92 93 If this driver is compiled as a module, it will be named ums-sddr09. 94 95config USB_STORAGE_SDDR55 96 bool "SanDisk SDDR-55 SmartMedia support" 97 depends on USB_STORAGE 98 help 99 Say Y here to include additional code to support the Sandisk SDDR-55 100 SmartMedia reader in the USB Mass Storage driver. 101 102config USB_STORAGE_JUMPSHOT 103 bool "Lexar Jumpshot Compact Flash Reader" 104 depends on USB_STORAGE 105 help 106 Say Y here to include additional code to support the Lexar Jumpshot 107 USB CompactFlash reader. 108 109config USB_STORAGE_ALAUDA 110 bool "Olympus MAUSB-10/Fuji DPC-R1 support" 111 depends on USB_STORAGE 112 help 113 Say Y here to include additional code to support the Olympus MAUSB-10 114 and Fujifilm DPC-R1 USB Card reader/writer devices. 115 116 These devices are based on the Alauda chip and support both 117 XD and SmartMedia cards. 118 119config USB_STORAGE_ONETOUCH 120 bool "Support OneTouch Button on Maxtor Hard Drives" 121 depends on USB_STORAGE 122 depends on INPUT=y || INPUT=USB_STORAGE 123 help 124 Say Y here to include additional code to support the Maxtor OneTouch 125 USB hard drive's onetouch button. 126 127 This code registers the button on the front of Maxtor OneTouch USB 128 hard drive's as an input device. An action can be associated with 129 this input in any keybinding software. (e.g. gnome's keyboard short- 130 cuts) 131 132config USB_STORAGE_KARMA 133 bool "Support for Rio Karma music player" 134 depends on USB_STORAGE 135 help 136 Say Y here to include additional code to support the Rio Karma 137 USB interface. 138 139 This code places the Rio Karma into mass storage mode, enabling 140 it to be mounted as an ordinary filesystem. Performing an eject 141 on the resulting scsi device node returns the Karma to normal 142 operation. 143 144config USB_STORAGE_CYPRESS_ATACB 145 bool "SAT emulation on Cypress USB/ATA Bridge with ATACB" 146 depends on USB_STORAGE 147 ---help--- 148 Say Y here if you want to use SAT (ata pass through) on devices based 149 on the Cypress USB/ATA bridge supporting ATACB. This will allow you 150 to use tools to tune and monitor your drive (like hdparm or smartctl). 151 152 If you say no here your device will still work with the standard usb 153 mass storage class. 154 155config USB_LIBUSUAL 156 bool "The shared table of common (or usual) storage devices" 157 depends on USB 158 help 159 This module contains a table of common (or usual) devices 160 for usb-storage and ub drivers, and allows to switch binding 161 of these devices without rebuilding modules. 162 163 Typical syntax of /etc/modprobe.conf is: 164 165 options libusual bias="ub" 166 167 If unsure, say N. 168