1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * MaxLinear/Exar USB to Serial driver 4 * 5 * Copyright (c) 2020 Manivannan Sadhasivam <mani@kernel.org> 6 * Copyright (c) 2021 Johan Hovold <johan@kernel.org> 7 * 8 * Based on the initial driver written by Patong Yang: 9 * 10 * https://lore.kernel.org/r/20180404070634.nhspvmxcjwfgjkcv@advantechmxl-desktop 11 * 12 * Copyright (c) 2018 Patong Yang <patong.mxl@gmail.com> 13 */ 14 15 #include <linux/kernel.h> 16 #include <linux/module.h> 17 #include <linux/slab.h> 18 #include <linux/tty.h> 19 #include <linux/usb.h> 20 #include <linux/usb/cdc.h> 21 #include <linux/usb/serial.h> 22 23 struct xr_txrx_clk_mask { 24 u16 tx; 25 u16 rx0; 26 u16 rx1; 27 }; 28 29 #define XR_INT_OSC_HZ 48000000U 30 #define XR21V141X_MIN_SPEED 46U 31 #define XR21V141X_MAX_SPEED XR_INT_OSC_HZ 32 33 /* XR21V141X register blocks */ 34 #define XR21V141X_UART_REG_BLOCK 0 35 #define XR21V141X_UM_REG_BLOCK 4 36 #define XR21V141X_UART_CUSTOM_BLOCK 0x66 37 38 /* XR21V141X UART registers */ 39 #define XR21V141X_CLOCK_DIVISOR_0 0x04 40 #define XR21V141X_CLOCK_DIVISOR_1 0x05 41 #define XR21V141X_CLOCK_DIVISOR_2 0x06 42 #define XR21V141X_TX_CLOCK_MASK_0 0x07 43 #define XR21V141X_TX_CLOCK_MASK_1 0x08 44 #define XR21V141X_RX_CLOCK_MASK_0 0x09 45 #define XR21V141X_RX_CLOCK_MASK_1 0x0a 46 #define XR21V141X_REG_FORMAT 0x0b 47 48 /* XR21V141X UART Manager registers */ 49 #define XR21V141X_UM_FIFO_ENABLE_REG 0x10 50 #define XR21V141X_UM_ENABLE_TX_FIFO 0x01 51 #define XR21V141X_UM_ENABLE_RX_FIFO 0x02 52 53 #define XR21V141X_UM_RX_FIFO_RESET 0x18 54 #define XR21V141X_UM_TX_FIFO_RESET 0x1c 55 56 #define XR_UART_ENABLE_TX 0x1 57 #define XR_UART_ENABLE_RX 0x2 58 59 #define XR_GPIO_RI BIT(0) 60 #define XR_GPIO_CD BIT(1) 61 #define XR_GPIO_DSR BIT(2) 62 #define XR_GPIO_DTR BIT(3) 63 #define XR_GPIO_CTS BIT(4) 64 #define XR_GPIO_RTS BIT(5) 65 #define XR_GPIO_CLK BIT(6) 66 #define XR_GPIO_XEN BIT(7) 67 #define XR_GPIO_TXT BIT(8) 68 #define XR_GPIO_RXT BIT(9) 69 70 #define XR_UART_DATA_MASK GENMASK(3, 0) 71 #define XR_UART_DATA_7 0x7 72 #define XR_UART_DATA_8 0x8 73 74 #define XR_UART_PARITY_MASK GENMASK(6, 4) 75 #define XR_UART_PARITY_SHIFT 4 76 #define XR_UART_PARITY_NONE (0x0 << XR_UART_PARITY_SHIFT) 77 #define XR_UART_PARITY_ODD (0x1 << XR_UART_PARITY_SHIFT) 78 #define XR_UART_PARITY_EVEN (0x2 << XR_UART_PARITY_SHIFT) 79 #define XR_UART_PARITY_MARK (0x3 << XR_UART_PARITY_SHIFT) 80 #define XR_UART_PARITY_SPACE (0x4 << XR_UART_PARITY_SHIFT) 81 82 #define XR_UART_STOP_MASK BIT(7) 83 #define XR_UART_STOP_SHIFT 7 84 #define XR_UART_STOP_1 (0x0 << XR_UART_STOP_SHIFT) 85 #define XR_UART_STOP_2 (0x1 << XR_UART_STOP_SHIFT) 86 87 #define XR_UART_FLOW_MODE_NONE 0x0 88 #define XR_UART_FLOW_MODE_HW 0x1 89 #define XR_UART_FLOW_MODE_SW 0x2 90 91 #define XR_GPIO_MODE_SEL_MASK GENMASK(2, 0) 92 #define XR_GPIO_MODE_SEL_RTS_CTS 0x1 93 #define XR_GPIO_MODE_SEL_DTR_DSR 0x2 94 #define XR_GPIO_MODE_SEL_RS485 0x3 95 #define XR_GPIO_MODE_SEL_RS485_ADDR 0x4 96 #define XR_GPIO_MODE_RS485_TX_H 0x8 97 #define XR_GPIO_MODE_TX_TOGGLE 0x100 98 #define XR_GPIO_MODE_RX_TOGGLE 0x200 99 100 #define XR_FIFO_RESET 0x1 101 102 #define XR_CUSTOM_DRIVER_ACTIVE 0x1 103 104 static int xr21v141x_uart_enable(struct usb_serial_port *port); 105 static int xr21v141x_uart_disable(struct usb_serial_port *port); 106 static int xr21v141x_fifo_reset(struct usb_serial_port *port); 107 static void xr21v141x_set_line_settings(struct tty_struct *tty, 108 struct usb_serial_port *port, 109 const struct ktermios *old_termios); 110 111 struct xr_type { 112 int reg_width; 113 u8 reg_recipient; 114 u8 set_reg; 115 u8 get_reg; 116 117 u16 uart_enable; 118 u16 flow_control; 119 u16 xon_char; 120 u16 xoff_char; 121 u16 tx_break; 122 u16 gpio_mode; 123 u16 gpio_direction; 124 u16 gpio_set; 125 u16 gpio_clear; 126 u16 gpio_status; 127 u16 tx_fifo_reset; 128 u16 rx_fifo_reset; 129 u16 custom_driver; 130 131 bool have_5_6_bit_mode; 132 bool have_xmit_toggle; 133 134 int (*enable)(struct usb_serial_port *port); 135 int (*disable)(struct usb_serial_port *port); 136 int (*fifo_reset)(struct usb_serial_port *port); 137 void (*set_line_settings)(struct tty_struct *tty, 138 struct usb_serial_port *port, 139 const struct ktermios *old_termios); 140 }; 141 142 enum xr_type_id { 143 XR21V141X, 144 XR21B142X, 145 XR21B1411, 146 XR2280X, 147 XR_TYPE_COUNT, 148 }; 149 150 static const struct xr_type xr_types[] = { 151 [XR21V141X] = { 152 .reg_width = 8, 153 .reg_recipient = USB_RECIP_DEVICE, 154 .set_reg = 0x00, 155 .get_reg = 0x01, 156 157 .uart_enable = 0x03, 158 .flow_control = 0x0c, 159 .xon_char = 0x10, 160 .xoff_char = 0x11, 161 .tx_break = 0x14, 162 .gpio_mode = 0x1a, 163 .gpio_direction = 0x1b, 164 .gpio_set = 0x1d, 165 .gpio_clear = 0x1e, 166 .gpio_status = 0x1f, 167 168 .enable = xr21v141x_uart_enable, 169 .disable = xr21v141x_uart_disable, 170 .fifo_reset = xr21v141x_fifo_reset, 171 .set_line_settings = xr21v141x_set_line_settings, 172 }, 173 [XR21B142X] = { 174 .reg_width = 16, 175 .reg_recipient = USB_RECIP_INTERFACE, 176 .set_reg = 0x00, 177 .get_reg = 0x00, 178 179 .uart_enable = 0x00, 180 .flow_control = 0x06, 181 .xon_char = 0x07, 182 .xoff_char = 0x08, 183 .tx_break = 0x0a, 184 .gpio_mode = 0x0c, 185 .gpio_direction = 0x0d, 186 .gpio_set = 0x0e, 187 .gpio_clear = 0x0f, 188 .gpio_status = 0x10, 189 .tx_fifo_reset = 0x40, 190 .rx_fifo_reset = 0x43, 191 .custom_driver = 0x60, 192 193 .have_5_6_bit_mode = true, 194 .have_xmit_toggle = true, 195 }, 196 [XR21B1411] = { 197 .reg_width = 12, 198 .reg_recipient = USB_RECIP_DEVICE, 199 .set_reg = 0x00, 200 .get_reg = 0x01, 201 202 .uart_enable = 0xc00, 203 .flow_control = 0xc06, 204 .xon_char = 0xc07, 205 .xoff_char = 0xc08, 206 .tx_break = 0xc0a, 207 .gpio_mode = 0xc0c, 208 .gpio_direction = 0xc0d, 209 .gpio_set = 0xc0e, 210 .gpio_clear = 0xc0f, 211 .gpio_status = 0xc10, 212 .tx_fifo_reset = 0xc80, 213 .rx_fifo_reset = 0xcc0, 214 .custom_driver = 0x20d, 215 }, 216 [XR2280X] = { 217 .reg_width = 16, 218 .reg_recipient = USB_RECIP_DEVICE, 219 .set_reg = 0x05, 220 .get_reg = 0x05, 221 222 .uart_enable = 0x40, 223 .flow_control = 0x46, 224 .xon_char = 0x47, 225 .xoff_char = 0x48, 226 .tx_break = 0x4a, 227 .gpio_mode = 0x4c, 228 .gpio_direction = 0x4d, 229 .gpio_set = 0x4e, 230 .gpio_clear = 0x4f, 231 .gpio_status = 0x50, 232 .tx_fifo_reset = 0x60, 233 .rx_fifo_reset = 0x63, 234 .custom_driver = 0x81, 235 }, 236 }; 237 238 struct xr_data { 239 const struct xr_type *type; 240 u8 channel; /* zero-based index or interface number */ 241 struct serial_rs485 rs485; 242 }; 243 244 static int xr_set_reg(struct usb_serial_port *port, u8 channel, u16 reg, u16 val) 245 { 246 struct xr_data *data = usb_get_serial_port_data(port); 247 const struct xr_type *type = data->type; 248 struct usb_serial *serial = port->serial; 249 int ret; 250 251 ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 252 type->set_reg, 253 USB_DIR_OUT | USB_TYPE_VENDOR | type->reg_recipient, 254 val, (channel << 8) | reg, NULL, 0, 255 USB_CTRL_SET_TIMEOUT); 256 if (ret < 0) { 257 dev_err(&port->dev, "Failed to set reg 0x%02x: %d\n", reg, ret); 258 return ret; 259 } 260 261 return 0; 262 } 263 264 static int xr_get_reg(struct usb_serial_port *port, u8 channel, u16 reg, u16 *val) 265 { 266 struct xr_data *data = usb_get_serial_port_data(port); 267 const struct xr_type *type = data->type; 268 struct usb_serial *serial = port->serial; 269 u8 *dmabuf; 270 int ret, len; 271 272 if (type->reg_width == 8) 273 len = 1; 274 else 275 len = 2; 276 277 dmabuf = kmalloc(len, GFP_KERNEL); 278 if (!dmabuf) 279 return -ENOMEM; 280 281 ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 282 type->get_reg, 283 USB_DIR_IN | USB_TYPE_VENDOR | type->reg_recipient, 284 0, (channel << 8) | reg, dmabuf, len, 285 USB_CTRL_GET_TIMEOUT); 286 if (ret == len) { 287 if (len == 2) 288 *val = le16_to_cpup((__le16 *)dmabuf); 289 else 290 *val = *dmabuf; 291 ret = 0; 292 } else { 293 dev_err(&port->dev, "Failed to get reg 0x%02x: %d\n", reg, ret); 294 if (ret >= 0) 295 ret = -EIO; 296 } 297 298 kfree(dmabuf); 299 300 return ret; 301 } 302 303 static int xr_set_reg_uart(struct usb_serial_port *port, u16 reg, u16 val) 304 { 305 struct xr_data *data = usb_get_serial_port_data(port); 306 307 return xr_set_reg(port, data->channel, reg, val); 308 } 309 310 static int xr_get_reg_uart(struct usb_serial_port *port, u16 reg, u16 *val) 311 { 312 struct xr_data *data = usb_get_serial_port_data(port); 313 314 return xr_get_reg(port, data->channel, reg, val); 315 } 316 317 static int xr_set_reg_um(struct usb_serial_port *port, u8 reg_base, u8 val) 318 { 319 struct xr_data *data = usb_get_serial_port_data(port); 320 u8 reg; 321 322 reg = reg_base + data->channel; 323 324 return xr_set_reg(port, XR21V141X_UM_REG_BLOCK, reg, val); 325 } 326 327 static int __xr_uart_enable(struct usb_serial_port *port) 328 { 329 struct xr_data *data = usb_get_serial_port_data(port); 330 331 return xr_set_reg_uart(port, data->type->uart_enable, 332 XR_UART_ENABLE_TX | XR_UART_ENABLE_RX); 333 } 334 335 static int __xr_uart_disable(struct usb_serial_port *port) 336 { 337 struct xr_data *data = usb_get_serial_port_data(port); 338 339 return xr_set_reg_uart(port, data->type->uart_enable, 0); 340 } 341 342 /* 343 * According to datasheet, below is the recommended sequence for enabling UART 344 * module in XR21V141X: 345 * 346 * Enable Tx FIFO 347 * Enable Tx and Rx 348 * Enable Rx FIFO 349 */ 350 static int xr21v141x_uart_enable(struct usb_serial_port *port) 351 { 352 int ret; 353 354 ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG, 355 XR21V141X_UM_ENABLE_TX_FIFO); 356 if (ret) 357 return ret; 358 359 ret = __xr_uart_enable(port); 360 if (ret) 361 return ret; 362 363 ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG, 364 XR21V141X_UM_ENABLE_TX_FIFO | XR21V141X_UM_ENABLE_RX_FIFO); 365 if (ret) 366 __xr_uart_disable(port); 367 368 return ret; 369 } 370 371 static int xr21v141x_uart_disable(struct usb_serial_port *port) 372 { 373 int ret; 374 375 ret = __xr_uart_disable(port); 376 if (ret) 377 return ret; 378 379 ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG, 0); 380 381 return ret; 382 } 383 384 static int xr_uart_enable(struct usb_serial_port *port) 385 { 386 struct xr_data *data = usb_get_serial_port_data(port); 387 388 if (data->type->enable) 389 return data->type->enable(port); 390 391 return __xr_uart_enable(port); 392 } 393 394 static int xr_uart_disable(struct usb_serial_port *port) 395 { 396 struct xr_data *data = usb_get_serial_port_data(port); 397 398 if (data->type->disable) 399 return data->type->disable(port); 400 401 return __xr_uart_disable(port); 402 } 403 404 static int xr21v141x_fifo_reset(struct usb_serial_port *port) 405 { 406 int ret; 407 408 ret = xr_set_reg_um(port, XR21V141X_UM_TX_FIFO_RESET, XR_FIFO_RESET); 409 if (ret) 410 return ret; 411 412 ret = xr_set_reg_um(port, XR21V141X_UM_RX_FIFO_RESET, XR_FIFO_RESET); 413 if (ret) 414 return ret; 415 416 return 0; 417 } 418 419 static int xr_fifo_reset(struct usb_serial_port *port) 420 { 421 struct xr_data *data = usb_get_serial_port_data(port); 422 int ret; 423 424 if (data->type->fifo_reset) 425 return data->type->fifo_reset(port); 426 427 ret = xr_set_reg_uart(port, data->type->tx_fifo_reset, XR_FIFO_RESET); 428 if (ret) 429 return ret; 430 431 ret = xr_set_reg_uart(port, data->type->rx_fifo_reset, XR_FIFO_RESET); 432 if (ret) 433 return ret; 434 435 return 0; 436 } 437 438 static int xr_tiocmget(struct tty_struct *tty) 439 { 440 struct usb_serial_port *port = tty->driver_data; 441 struct xr_data *data = usb_get_serial_port_data(port); 442 u16 status; 443 int ret; 444 445 ret = xr_get_reg_uart(port, data->type->gpio_status, &status); 446 if (ret) 447 return ret; 448 449 /* 450 * Modem control pins are active low, so reading '0' means it is active 451 * and '1' means not active. 452 */ 453 ret = ((status & XR_GPIO_DTR) ? 0 : TIOCM_DTR) | 454 ((status & XR_GPIO_RTS) ? 0 : TIOCM_RTS) | 455 ((status & XR_GPIO_CTS) ? 0 : TIOCM_CTS) | 456 ((status & XR_GPIO_DSR) ? 0 : TIOCM_DSR) | 457 ((status & XR_GPIO_RI) ? 0 : TIOCM_RI) | 458 ((status & XR_GPIO_CD) ? 0 : TIOCM_CD); 459 460 return ret; 461 } 462 463 static int xr_tiocmset_port(struct usb_serial_port *port, 464 unsigned int set, unsigned int clear) 465 { 466 struct xr_data *data = usb_get_serial_port_data(port); 467 const struct xr_type *type = data->type; 468 u16 gpio_set = 0; 469 u16 gpio_clr = 0; 470 int ret = 0; 471 472 /* Modem control pins are active low, so set & clr are swapped */ 473 if (set & TIOCM_RTS) 474 gpio_clr |= XR_GPIO_RTS; 475 if (set & TIOCM_DTR) 476 gpio_clr |= XR_GPIO_DTR; 477 if (clear & TIOCM_RTS) 478 gpio_set |= XR_GPIO_RTS; 479 if (clear & TIOCM_DTR) 480 gpio_set |= XR_GPIO_DTR; 481 482 /* Writing '0' to gpio_{set/clr} bits has no effect, so no need to do */ 483 if (gpio_clr) 484 ret = xr_set_reg_uart(port, type->gpio_clear, gpio_clr); 485 486 if (gpio_set) 487 ret = xr_set_reg_uart(port, type->gpio_set, gpio_set); 488 489 return ret; 490 } 491 492 static int xr_tiocmset(struct tty_struct *tty, 493 unsigned int set, unsigned int clear) 494 { 495 struct usb_serial_port *port = tty->driver_data; 496 497 return xr_tiocmset_port(port, set, clear); 498 } 499 500 static void xr_dtr_rts(struct usb_serial_port *port, int on) 501 { 502 if (on) 503 xr_tiocmset_port(port, TIOCM_DTR | TIOCM_RTS, 0); 504 else 505 xr_tiocmset_port(port, 0, TIOCM_DTR | TIOCM_RTS); 506 } 507 508 static int xr_break_ctl(struct tty_struct *tty, int break_state) 509 { 510 struct usb_serial_port *port = tty->driver_data; 511 struct xr_data *data = usb_get_serial_port_data(port); 512 const struct xr_type *type = data->type; 513 u16 state; 514 515 if (break_state == 0) 516 state = 0; 517 else 518 state = GENMASK(type->reg_width - 1, 0); 519 520 dev_dbg(&port->dev, "Turning break %s\n", state == 0 ? "off" : "on"); 521 522 return xr_set_reg_uart(port, type->tx_break, state); 523 } 524 525 /* Tx and Rx clock mask values obtained from section 3.3.4 of datasheet */ 526 static const struct xr_txrx_clk_mask xr21v141x_txrx_clk_masks[] = { 527 { 0x000, 0x000, 0x000 }, 528 { 0x000, 0x000, 0x000 }, 529 { 0x100, 0x000, 0x100 }, 530 { 0x020, 0x400, 0x020 }, 531 { 0x010, 0x100, 0x010 }, 532 { 0x208, 0x040, 0x208 }, 533 { 0x104, 0x820, 0x108 }, 534 { 0x844, 0x210, 0x884 }, 535 { 0x444, 0x110, 0x444 }, 536 { 0x122, 0x888, 0x224 }, 537 { 0x912, 0x448, 0x924 }, 538 { 0x492, 0x248, 0x492 }, 539 { 0x252, 0x928, 0x292 }, 540 { 0x94a, 0x4a4, 0xa52 }, 541 { 0x52a, 0xaa4, 0x54a }, 542 { 0xaaa, 0x954, 0x4aa }, 543 { 0xaaa, 0x554, 0xaaa }, 544 { 0x555, 0xad4, 0x5aa }, 545 { 0xb55, 0xab4, 0x55a }, 546 { 0x6b5, 0x5ac, 0xb56 }, 547 { 0x5b5, 0xd6c, 0x6d6 }, 548 { 0xb6d, 0xb6a, 0xdb6 }, 549 { 0x76d, 0x6da, 0xbb6 }, 550 { 0xedd, 0xdda, 0x76e }, 551 { 0xddd, 0xbba, 0xeee }, 552 { 0x7bb, 0xf7a, 0xdde }, 553 { 0xf7b, 0xef6, 0x7de }, 554 { 0xdf7, 0xbf6, 0xf7e }, 555 { 0x7f7, 0xfee, 0xefe }, 556 { 0xfdf, 0xfbe, 0x7fe }, 557 { 0xf7f, 0xefe, 0xffe }, 558 { 0xfff, 0xffe, 0xffd }, 559 }; 560 561 static int xr21v141x_set_baudrate(struct tty_struct *tty, struct usb_serial_port *port) 562 { 563 u32 divisor, baud, idx; 564 u16 tx_mask, rx_mask; 565 int ret; 566 567 baud = tty->termios.c_ospeed; 568 if (!baud) 569 return 0; 570 571 baud = clamp(baud, XR21V141X_MIN_SPEED, XR21V141X_MAX_SPEED); 572 divisor = XR_INT_OSC_HZ / baud; 573 idx = ((32 * XR_INT_OSC_HZ) / baud) & 0x1f; 574 tx_mask = xr21v141x_txrx_clk_masks[idx].tx; 575 576 if (divisor & 0x01) 577 rx_mask = xr21v141x_txrx_clk_masks[idx].rx1; 578 else 579 rx_mask = xr21v141x_txrx_clk_masks[idx].rx0; 580 581 dev_dbg(&port->dev, "Setting baud rate: %u\n", baud); 582 /* 583 * XR21V141X uses fractional baud rate generator with 48MHz internal 584 * oscillator and 19-bit programmable divisor. So theoretically it can 585 * generate most commonly used baud rates with high accuracy. 586 */ 587 ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_0, 588 divisor & 0xff); 589 if (ret) 590 return ret; 591 592 ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_1, 593 (divisor >> 8) & 0xff); 594 if (ret) 595 return ret; 596 597 ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_2, 598 (divisor >> 16) & 0xff); 599 if (ret) 600 return ret; 601 602 ret = xr_set_reg_uart(port, XR21V141X_TX_CLOCK_MASK_0, 603 tx_mask & 0xff); 604 if (ret) 605 return ret; 606 607 ret = xr_set_reg_uart(port, XR21V141X_TX_CLOCK_MASK_1, 608 (tx_mask >> 8) & 0xff); 609 if (ret) 610 return ret; 611 612 ret = xr_set_reg_uart(port, XR21V141X_RX_CLOCK_MASK_0, 613 rx_mask & 0xff); 614 if (ret) 615 return ret; 616 617 ret = xr_set_reg_uart(port, XR21V141X_RX_CLOCK_MASK_1, 618 (rx_mask >> 8) & 0xff); 619 if (ret) 620 return ret; 621 622 tty_encode_baud_rate(tty, baud, baud); 623 624 return 0; 625 } 626 627 static void xr_set_flow_mode(struct tty_struct *tty, 628 struct usb_serial_port *port, 629 const struct ktermios *old_termios) 630 { 631 struct xr_data *data = usb_get_serial_port_data(port); 632 const struct xr_type *type = data->type; 633 u16 flow, gpio_mode; 634 bool rs485_enabled; 635 int ret; 636 637 ret = xr_get_reg_uart(port, type->gpio_mode, &gpio_mode); 638 if (ret) 639 return; 640 641 /* 642 * According to the datasheets, the UART needs to be disabled while 643 * writing to the FLOW_CONTROL register (XR21V141X), or any register 644 * but GPIO_SET, GPIO_CLEAR, TX_BREAK and ERROR_STATUS (XR21B142X). 645 */ 646 xr_uart_disable(port); 647 648 /* Set GPIO mode for controlling the pins manually by default. */ 649 gpio_mode &= ~XR_GPIO_MODE_SEL_MASK; 650 651 rs485_enabled = !!(data->rs485.flags & SER_RS485_ENABLED); 652 if (rs485_enabled) { 653 dev_dbg(&port->dev, "Enabling RS-485\n"); 654 gpio_mode |= XR_GPIO_MODE_SEL_RS485; 655 if (data->rs485.flags & SER_RS485_RTS_ON_SEND) 656 gpio_mode &= ~XR_GPIO_MODE_RS485_TX_H; 657 else 658 gpio_mode |= XR_GPIO_MODE_RS485_TX_H; 659 } 660 661 if (C_CRTSCTS(tty) && C_BAUD(tty) != B0 && !rs485_enabled) { 662 dev_dbg(&port->dev, "Enabling hardware flow ctrl\n"); 663 gpio_mode |= XR_GPIO_MODE_SEL_RTS_CTS; 664 flow = XR_UART_FLOW_MODE_HW; 665 } else if (I_IXON(tty)) { 666 u8 start_char = START_CHAR(tty); 667 u8 stop_char = STOP_CHAR(tty); 668 669 dev_dbg(&port->dev, "Enabling sw flow ctrl\n"); 670 flow = XR_UART_FLOW_MODE_SW; 671 672 xr_set_reg_uart(port, type->xon_char, start_char); 673 xr_set_reg_uart(port, type->xoff_char, stop_char); 674 } else { 675 dev_dbg(&port->dev, "Disabling flow ctrl\n"); 676 flow = XR_UART_FLOW_MODE_NONE; 677 } 678 679 xr_set_reg_uart(port, type->flow_control, flow); 680 xr_set_reg_uart(port, type->gpio_mode, gpio_mode); 681 682 xr_uart_enable(port); 683 684 if (C_BAUD(tty) == B0) 685 xr_dtr_rts(port, 0); 686 else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) 687 xr_dtr_rts(port, 1); 688 } 689 690 static void xr21v141x_set_line_settings(struct tty_struct *tty, 691 struct usb_serial_port *port, 692 const struct ktermios *old_termios) 693 { 694 struct ktermios *termios = &tty->termios; 695 u8 bits = 0; 696 int ret; 697 698 if (!old_termios || (tty->termios.c_ospeed != old_termios->c_ospeed)) 699 xr21v141x_set_baudrate(tty, port); 700 701 switch (C_CSIZE(tty)) { 702 case CS5: 703 case CS6: 704 /* CS5 and CS6 are not supported, so just restore old setting */ 705 termios->c_cflag &= ~CSIZE; 706 if (old_termios) 707 termios->c_cflag |= old_termios->c_cflag & CSIZE; 708 else 709 termios->c_cflag |= CS8; 710 711 if (C_CSIZE(tty) == CS7) 712 bits |= XR_UART_DATA_7; 713 else 714 bits |= XR_UART_DATA_8; 715 break; 716 case CS7: 717 bits |= XR_UART_DATA_7; 718 break; 719 case CS8: 720 default: 721 bits |= XR_UART_DATA_8; 722 break; 723 } 724 725 if (C_PARENB(tty)) { 726 if (C_CMSPAR(tty)) { 727 if (C_PARODD(tty)) 728 bits |= XR_UART_PARITY_MARK; 729 else 730 bits |= XR_UART_PARITY_SPACE; 731 } else { 732 if (C_PARODD(tty)) 733 bits |= XR_UART_PARITY_ODD; 734 else 735 bits |= XR_UART_PARITY_EVEN; 736 } 737 } 738 739 if (C_CSTOPB(tty)) 740 bits |= XR_UART_STOP_2; 741 else 742 bits |= XR_UART_STOP_1; 743 744 ret = xr_set_reg_uart(port, XR21V141X_REG_FORMAT, bits); 745 if (ret) 746 return; 747 } 748 749 static void xr_cdc_set_line_coding(struct tty_struct *tty, 750 struct usb_serial_port *port, 751 const struct ktermios *old_termios) 752 { 753 struct xr_data *data = usb_get_serial_port_data(port); 754 struct usb_host_interface *alt = port->serial->interface->cur_altsetting; 755 struct usb_device *udev = port->serial->dev; 756 struct usb_cdc_line_coding *lc; 757 int ret; 758 759 lc = kzalloc(sizeof(*lc), GFP_KERNEL); 760 if (!lc) 761 return; 762 763 if (tty->termios.c_ospeed) 764 lc->dwDTERate = cpu_to_le32(tty->termios.c_ospeed); 765 else 766 lc->dwDTERate = cpu_to_le32(9600); 767 768 if (C_CSTOPB(tty)) 769 lc->bCharFormat = USB_CDC_2_STOP_BITS; 770 else 771 lc->bCharFormat = USB_CDC_1_STOP_BITS; 772 773 if (C_PARENB(tty)) { 774 if (C_CMSPAR(tty)) { 775 if (C_PARODD(tty)) 776 lc->bParityType = USB_CDC_MARK_PARITY; 777 else 778 lc->bParityType = USB_CDC_SPACE_PARITY; 779 } else { 780 if (C_PARODD(tty)) 781 lc->bParityType = USB_CDC_ODD_PARITY; 782 else 783 lc->bParityType = USB_CDC_EVEN_PARITY; 784 } 785 } else { 786 lc->bParityType = USB_CDC_NO_PARITY; 787 } 788 789 if (!data->type->have_5_6_bit_mode && 790 (C_CSIZE(tty) == CS5 || C_CSIZE(tty) == CS6)) { 791 tty->termios.c_cflag &= ~CSIZE; 792 if (old_termios) 793 tty->termios.c_cflag |= old_termios->c_cflag & CSIZE; 794 else 795 tty->termios.c_cflag |= CS8; 796 } 797 798 switch (C_CSIZE(tty)) { 799 case CS5: 800 lc->bDataBits = 5; 801 break; 802 case CS6: 803 lc->bDataBits = 6; 804 break; 805 case CS7: 806 lc->bDataBits = 7; 807 break; 808 case CS8: 809 default: 810 lc->bDataBits = 8; 811 break; 812 } 813 814 ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 815 USB_CDC_REQ_SET_LINE_CODING, 816 USB_TYPE_CLASS | USB_RECIP_INTERFACE, 817 0, alt->desc.bInterfaceNumber, 818 lc, sizeof(*lc), USB_CTRL_SET_TIMEOUT); 819 if (ret < 0) 820 dev_err(&port->dev, "Failed to set line coding: %d\n", ret); 821 822 kfree(lc); 823 } 824 825 static void xr_sanitize_serial_rs485(struct serial_rs485 *rs485) 826 { 827 if (!(rs485->flags & SER_RS485_ENABLED)) { 828 memset(rs485, 0, sizeof(*rs485)); 829 return; 830 } 831 832 /* RTS always toggles after TX */ 833 if (rs485->flags & SER_RS485_RTS_ON_SEND) 834 rs485->flags &= ~SER_RS485_RTS_AFTER_SEND; 835 else 836 rs485->flags |= SER_RS485_RTS_AFTER_SEND; 837 838 /* Only the flags are implemented at the moment */ 839 rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | 840 SER_RS485_RTS_AFTER_SEND; 841 rs485->delay_rts_before_send = 0; 842 rs485->delay_rts_after_send = 0; 843 memset(rs485->padding, 0, sizeof(rs485->padding)); 844 } 845 846 static int xr_get_rs485_config(struct tty_struct *tty, 847 struct serial_rs485 __user *argp) 848 { 849 struct usb_serial_port *port = tty->driver_data; 850 struct xr_data *data = usb_get_serial_port_data(port); 851 852 down_read(&tty->termios_rwsem); 853 if (copy_to_user(argp, &data->rs485, sizeof(data->rs485))) { 854 up_read(&tty->termios_rwsem); 855 return -EFAULT; 856 } 857 up_read(&tty->termios_rwsem); 858 859 return 0; 860 } 861 862 static int xr_set_rs485_config(struct tty_struct *tty, 863 struct serial_rs485 __user *argp) 864 { 865 struct usb_serial_port *port = tty->driver_data; 866 struct xr_data *data = usb_get_serial_port_data(port); 867 struct serial_rs485 rs485; 868 869 if (copy_from_user(&rs485, argp, sizeof(rs485))) 870 return -EFAULT; 871 xr_sanitize_serial_rs485(&rs485); 872 873 down_write(&tty->termios_rwsem); 874 data->rs485 = rs485; 875 xr_set_flow_mode(tty, port, NULL); 876 up_write(&tty->termios_rwsem); 877 878 if (copy_to_user(argp, &rs485, sizeof(rs485))) 879 return -EFAULT; 880 881 return 0; 882 } 883 884 static int xr_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) 885 { 886 void __user *argp = (void __user *)arg; 887 888 switch (cmd) { 889 case TIOCGRS485: 890 return xr_get_rs485_config(tty, argp); 891 case TIOCSRS485: 892 return xr_set_rs485_config(tty, argp); 893 } 894 895 return -ENOIOCTLCMD; 896 } 897 898 static void xr_set_termios(struct tty_struct *tty, 899 struct usb_serial_port *port, 900 const struct ktermios *old_termios) 901 { 902 struct xr_data *data = usb_get_serial_port_data(port); 903 904 /* 905 * XR21V141X does not have a CUSTOM_DRIVER flag and always enters CDC 906 * mode upon receiving CDC requests. 907 */ 908 if (data->type->set_line_settings) 909 data->type->set_line_settings(tty, port, old_termios); 910 else 911 xr_cdc_set_line_coding(tty, port, old_termios); 912 913 xr_set_flow_mode(tty, port, old_termios); 914 } 915 916 static int xr_open(struct tty_struct *tty, struct usb_serial_port *port) 917 { 918 int ret; 919 920 ret = xr_fifo_reset(port); 921 if (ret) 922 return ret; 923 924 ret = xr_uart_enable(port); 925 if (ret) { 926 dev_err(&port->dev, "Failed to enable UART\n"); 927 return ret; 928 } 929 930 /* Setup termios */ 931 if (tty) 932 xr_set_termios(tty, port, NULL); 933 934 ret = usb_serial_generic_open(tty, port); 935 if (ret) { 936 xr_uart_disable(port); 937 return ret; 938 } 939 940 return 0; 941 } 942 943 static void xr_close(struct usb_serial_port *port) 944 { 945 usb_serial_generic_close(port); 946 947 xr_uart_disable(port); 948 } 949 950 static int xr_probe(struct usb_serial *serial, const struct usb_device_id *id) 951 { 952 struct usb_interface *control = serial->interface; 953 struct usb_host_interface *alt = control->cur_altsetting; 954 struct usb_cdc_parsed_header hdrs; 955 struct usb_cdc_union_desc *desc; 956 struct usb_interface *data; 957 int ret; 958 959 ret = cdc_parse_cdc_header(&hdrs, control, alt->extra, alt->extralen); 960 if (ret < 0) 961 return -ENODEV; 962 963 desc = hdrs.usb_cdc_union_desc; 964 if (!desc) 965 return -ENODEV; 966 967 data = usb_ifnum_to_if(serial->dev, desc->bSlaveInterface0); 968 if (!data) 969 return -ENODEV; 970 971 ret = usb_serial_claim_interface(serial, data); 972 if (ret) 973 return ret; 974 975 usb_set_serial_data(serial, (void *)id->driver_info); 976 977 return 0; 978 } 979 980 static int xr_gpio_init(struct usb_serial_port *port, const struct xr_type *type) 981 { 982 u16 mask, mode; 983 int ret; 984 985 /* 986 * Configure all pins as GPIO except for Receive and Transmit Toggle. 987 */ 988 mode = 0; 989 if (type->have_xmit_toggle) 990 mode |= XR_GPIO_MODE_RX_TOGGLE | XR_GPIO_MODE_TX_TOGGLE; 991 992 ret = xr_set_reg_uart(port, type->gpio_mode, mode); 993 if (ret) 994 return ret; 995 996 /* 997 * Configure DTR and RTS as outputs and make sure they are deasserted 998 * (active low), and configure RI, CD, DSR and CTS as inputs. 999 */ 1000 mask = XR_GPIO_DTR | XR_GPIO_RTS; 1001 ret = xr_set_reg_uart(port, type->gpio_direction, mask); 1002 if (ret) 1003 return ret; 1004 1005 ret = xr_set_reg_uart(port, type->gpio_set, mask); 1006 if (ret) 1007 return ret; 1008 1009 return 0; 1010 } 1011 1012 static int xr_port_probe(struct usb_serial_port *port) 1013 { 1014 struct usb_interface_descriptor *desc; 1015 const struct xr_type *type; 1016 struct xr_data *data; 1017 enum xr_type_id type_id; 1018 int ret; 1019 1020 type_id = (int)(unsigned long)usb_get_serial_data(port->serial); 1021 type = &xr_types[type_id]; 1022 1023 data = kzalloc(sizeof(*data), GFP_KERNEL); 1024 if (!data) 1025 return -ENOMEM; 1026 1027 data->type = type; 1028 1029 desc = &port->serial->interface->cur_altsetting->desc; 1030 if (type_id == XR21V141X) 1031 data->channel = desc->bInterfaceNumber / 2; 1032 else 1033 data->channel = desc->bInterfaceNumber; 1034 1035 usb_set_serial_port_data(port, data); 1036 1037 if (type->custom_driver) { 1038 ret = xr_set_reg_uart(port, type->custom_driver, 1039 XR_CUSTOM_DRIVER_ACTIVE); 1040 if (ret) 1041 goto err_free; 1042 } 1043 1044 ret = xr_gpio_init(port, type); 1045 if (ret) 1046 goto err_free; 1047 1048 return 0; 1049 1050 err_free: 1051 kfree(data); 1052 1053 return ret; 1054 } 1055 1056 static void xr_port_remove(struct usb_serial_port *port) 1057 { 1058 struct xr_data *data = usb_get_serial_port_data(port); 1059 1060 kfree(data); 1061 } 1062 1063 #define XR_DEVICE(vid, pid, type) \ 1064 USB_DEVICE_INTERFACE_CLASS((vid), (pid), USB_CLASS_COMM), \ 1065 .driver_info = (type) 1066 1067 static const struct usb_device_id id_table[] = { 1068 { XR_DEVICE(0x04e2, 0x1400, XR2280X) }, 1069 { XR_DEVICE(0x04e2, 0x1401, XR2280X) }, 1070 { XR_DEVICE(0x04e2, 0x1402, XR2280X) }, 1071 { XR_DEVICE(0x04e2, 0x1403, XR2280X) }, 1072 { XR_DEVICE(0x04e2, 0x1410, XR21V141X) }, 1073 { XR_DEVICE(0x04e2, 0x1411, XR21B1411) }, 1074 { XR_DEVICE(0x04e2, 0x1412, XR21V141X) }, 1075 { XR_DEVICE(0x04e2, 0x1414, XR21V141X) }, 1076 { XR_DEVICE(0x04e2, 0x1420, XR21B142X) }, 1077 { XR_DEVICE(0x04e2, 0x1422, XR21B142X) }, 1078 { XR_DEVICE(0x04e2, 0x1424, XR21B142X) }, 1079 { } 1080 }; 1081 MODULE_DEVICE_TABLE(usb, id_table); 1082 1083 static struct usb_serial_driver xr_device = { 1084 .driver = { 1085 .owner = THIS_MODULE, 1086 .name = "xr_serial", 1087 }, 1088 .id_table = id_table, 1089 .num_ports = 1, 1090 .probe = xr_probe, 1091 .port_probe = xr_port_probe, 1092 .port_remove = xr_port_remove, 1093 .open = xr_open, 1094 .close = xr_close, 1095 .break_ctl = xr_break_ctl, 1096 .set_termios = xr_set_termios, 1097 .tiocmget = xr_tiocmget, 1098 .tiocmset = xr_tiocmset, 1099 .ioctl = xr_ioctl, 1100 .dtr_rts = xr_dtr_rts 1101 }; 1102 1103 static struct usb_serial_driver * const serial_drivers[] = { 1104 &xr_device, NULL 1105 }; 1106 1107 module_usb_serial_driver(serial_drivers, id_table); 1108 1109 MODULE_AUTHOR("Manivannan Sadhasivam <mani@kernel.org>"); 1110 MODULE_DESCRIPTION("MaxLinear/Exar USB to Serial driver"); 1111 MODULE_LICENSE("GPL"); 1112