1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * USB ConnectTech WhiteHEAT driver
4 *
5 * Copyright (C) 2002
6 * Connect Tech Inc.
7 *
8 * Copyright (C) 1999 - 2001
9 * Greg Kroah-Hartman (greg@kroah.com)
10 *
11 * See Documentation/usb/usb-serial.rst for more information on using this
12 * driver
13 */
14
15 #include <linux/kernel.h>
16 #include <linux/errno.h>
17 #include <linux/slab.h>
18 #include <linux/tty.h>
19 #include <linux/tty_driver.h>
20 #include <linux/tty_flip.h>
21 #include <linux/module.h>
22 #include <linux/spinlock.h>
23 #include <linux/mutex.h>
24 #include <linux/uaccess.h>
25 #include <asm/termbits.h>
26 #include <linux/usb.h>
27 #include <linux/serial_reg.h>
28 #include <linux/serial.h>
29 #include <linux/usb/serial.h>
30 #include <linux/usb/ezusb.h>
31 #include "whiteheat.h" /* WhiteHEAT specific commands */
32
33 /*
34 * Version Information
35 */
36 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>"
37 #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
38
39 #define CONNECT_TECH_VENDOR_ID 0x0710
40 #define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001
41 #define CONNECT_TECH_WHITE_HEAT_ID 0x8001
42
43 /*
44 ID tables for whiteheat are unusual, because we want to different
45 things for different versions of the device. Eventually, this
46 will be doable from a single table. But, for now, we define two
47 separate ID tables, and then a third table that combines them
48 just for the purpose of exporting the autoloading information.
49 */
50 static const struct usb_device_id id_table_std[] = {
51 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
52 { } /* Terminating entry */
53 };
54
55 static const struct usb_device_id id_table_prerenumeration[] = {
56 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
57 { } /* Terminating entry */
58 };
59
60 static const struct usb_device_id id_table_combined[] = {
61 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
62 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
63 { } /* Terminating entry */
64 };
65
66 MODULE_DEVICE_TABLE(usb, id_table_combined);
67
68
69 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
70 static int whiteheat_firmware_download(struct usb_serial *serial,
71 const struct usb_device_id *id);
72 static int whiteheat_firmware_attach(struct usb_serial *serial);
73
74 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
75 static int whiteheat_attach(struct usb_serial *serial);
76 static void whiteheat_release(struct usb_serial *serial);
77 static int whiteheat_port_probe(struct usb_serial_port *port);
78 static void whiteheat_port_remove(struct usb_serial_port *port);
79 static int whiteheat_open(struct tty_struct *tty,
80 struct usb_serial_port *port);
81 static void whiteheat_close(struct usb_serial_port *port);
82 static void whiteheat_get_serial(struct tty_struct *tty,
83 struct serial_struct *ss);
84 static void whiteheat_set_termios(struct tty_struct *tty,
85 struct usb_serial_port *port,
86 const struct ktermios *old_termios);
87 static int whiteheat_tiocmget(struct tty_struct *tty);
88 static int whiteheat_tiocmset(struct tty_struct *tty,
89 unsigned int set, unsigned int clear);
90 static int whiteheat_break_ctl(struct tty_struct *tty, int break_state);
91
92 static struct usb_serial_driver whiteheat_fake_device = {
93 .driver = {
94 .name = "whiteheatnofirm",
95 },
96 .description = "Connect Tech - WhiteHEAT - (prerenumeration)",
97 .id_table = id_table_prerenumeration,
98 .num_ports = 1,
99 .probe = whiteheat_firmware_download,
100 .attach = whiteheat_firmware_attach,
101 };
102
103 static struct usb_serial_driver whiteheat_device = {
104 .driver = {
105 .name = "whiteheat",
106 },
107 .description = "Connect Tech - WhiteHEAT",
108 .id_table = id_table_std,
109 .num_ports = 4,
110 .num_bulk_in = 5,
111 .num_bulk_out = 5,
112 .attach = whiteheat_attach,
113 .release = whiteheat_release,
114 .port_probe = whiteheat_port_probe,
115 .port_remove = whiteheat_port_remove,
116 .open = whiteheat_open,
117 .close = whiteheat_close,
118 .get_serial = whiteheat_get_serial,
119 .set_termios = whiteheat_set_termios,
120 .break_ctl = whiteheat_break_ctl,
121 .tiocmget = whiteheat_tiocmget,
122 .tiocmset = whiteheat_tiocmset,
123 .throttle = usb_serial_generic_throttle,
124 .unthrottle = usb_serial_generic_unthrottle,
125 };
126
127 static struct usb_serial_driver * const serial_drivers[] = {
128 &whiteheat_fake_device, &whiteheat_device, NULL
129 };
130
131 struct whiteheat_command_private {
132 struct mutex mutex;
133 __u8 port_running;
134 __u8 command_finished;
135 wait_queue_head_t wait_command; /* for handling sleeping whilst
136 waiting for a command to
137 finish */
138 __u8 result_buffer[64];
139 };
140
141 struct whiteheat_private {
142 __u8 mcr; /* FIXME: no locking on mcr */
143 };
144
145
146 /* local function prototypes */
147 static int start_command_port(struct usb_serial *serial);
148 static void stop_command_port(struct usb_serial *serial);
149 static void command_port_write_callback(struct urb *urb);
150 static void command_port_read_callback(struct urb *urb);
151
152 static int firm_send_command(struct usb_serial_port *port, __u8 command,
153 __u8 *data, __u8 datasize);
154 static int firm_open(struct usb_serial_port *port);
155 static int firm_close(struct usb_serial_port *port);
156 static void firm_setup_port(struct tty_struct *tty);
157 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
158 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
159 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
160 static int firm_purge(struct usb_serial_port *port, __u8 rxtx);
161 static int firm_get_dtr_rts(struct usb_serial_port *port);
162 static int firm_report_tx_done(struct usb_serial_port *port);
163
164
165 #define COMMAND_PORT 4
166 #define COMMAND_TIMEOUT (2*HZ) /* 2 second timeout for a command */
167 #define COMMAND_TIMEOUT_MS 2000
168
169
170 /*****************************************************************************
171 * Connect Tech's White Heat prerenumeration driver functions
172 *****************************************************************************/
173
174 /* steps to download the firmware to the WhiteHEAT device:
175 - hold the reset (by writing to the reset bit of the CPUCS register)
176 - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD
177 - release the reset (by writing to the CPUCS register)
178 - download the WH.HEX file for all addresses greater than 0x1b3f using
179 VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD
180 - hold the reset
181 - download the WH.HEX file for all addresses less than 0x1b40 using
182 VENDOR_REQUEST_ANCHOR_LOAD
183 - release the reset
184 - device renumerated itself and comes up as new device id with all
185 firmware download completed.
186 */
whiteheat_firmware_download(struct usb_serial * serial,const struct usb_device_id * id)187 static int whiteheat_firmware_download(struct usb_serial *serial,
188 const struct usb_device_id *id)
189 {
190 int response;
191
192 response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw");
193 if (response >= 0) {
194 response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw");
195 if (response >= 0)
196 return 0;
197 }
198 return -ENOENT;
199 }
200
201
whiteheat_firmware_attach(struct usb_serial * serial)202 static int whiteheat_firmware_attach(struct usb_serial *serial)
203 {
204 /* We want this device to fail to have a driver assigned to it */
205 return 1;
206 }
207
208
209 /*****************************************************************************
210 * Connect Tech's White Heat serial driver functions
211 *****************************************************************************/
212
whiteheat_attach(struct usb_serial * serial)213 static int whiteheat_attach(struct usb_serial *serial)
214 {
215 struct usb_serial_port *command_port;
216 struct whiteheat_command_private *command_info;
217 struct whiteheat_hw_info *hw_info;
218 int pipe;
219 int ret;
220 int alen;
221 __u8 *command;
222 __u8 *result;
223
224 command_port = serial->port[COMMAND_PORT];
225
226 pipe = usb_sndbulkpipe(serial->dev,
227 command_port->bulk_out_endpointAddress);
228 command = kmalloc(2, GFP_KERNEL);
229 if (!command)
230 goto no_command_buffer;
231 command[0] = WHITEHEAT_GET_HW_INFO;
232 command[1] = 0;
233
234 result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
235 if (!result)
236 goto no_result_buffer;
237 /*
238 * When the module is reloaded the firmware is still there and
239 * the endpoints are still in the usb core unchanged. This is the
240 * unlinking bug in disguise. Same for the call below.
241 */
242 usb_clear_halt(serial->dev, pipe);
243 ret = usb_bulk_msg(serial->dev, pipe, command, 2,
244 &alen, COMMAND_TIMEOUT_MS);
245 if (ret) {
246 dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n",
247 serial->type->description, ret);
248 goto no_firmware;
249 } else if (alen != 2) {
250 dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n",
251 serial->type->description, alen);
252 goto no_firmware;
253 }
254
255 pipe = usb_rcvbulkpipe(serial->dev,
256 command_port->bulk_in_endpointAddress);
257 /* See the comment on the usb_clear_halt() above */
258 usb_clear_halt(serial->dev, pipe);
259 ret = usb_bulk_msg(serial->dev, pipe, result,
260 sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
261 if (ret) {
262 dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n",
263 serial->type->description, ret);
264 goto no_firmware;
265 } else if (alen != sizeof(*hw_info) + 1) {
266 dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n",
267 serial->type->description, alen);
268 goto no_firmware;
269 } else if (result[0] != command[0]) {
270 dev_err(&serial->dev->dev, "%s: Command failed [%d]\n",
271 serial->type->description, result[0]);
272 goto no_firmware;
273 }
274
275 hw_info = (struct whiteheat_hw_info *)&result[1];
276
277 dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n",
278 serial->type->description,
279 hw_info->sw_major_rev, hw_info->sw_minor_rev);
280
281 command_info = kmalloc(sizeof(struct whiteheat_command_private),
282 GFP_KERNEL);
283 if (!command_info)
284 goto no_command_private;
285
286 mutex_init(&command_info->mutex);
287 command_info->port_running = 0;
288 init_waitqueue_head(&command_info->wait_command);
289 usb_set_serial_port_data(command_port, command_info);
290 command_port->write_urb->complete = command_port_write_callback;
291 command_port->read_urb->complete = command_port_read_callback;
292 kfree(result);
293 kfree(command);
294
295 return 0;
296
297 no_firmware:
298 /* Firmware likely not running */
299 dev_err(&serial->dev->dev,
300 "%s: Unable to retrieve firmware version, try replugging\n",
301 serial->type->description);
302 dev_err(&serial->dev->dev,
303 "%s: If the firmware is not running (status led not blinking)\n",
304 serial->type->description);
305 dev_err(&serial->dev->dev,
306 "%s: please contact support@connecttech.com\n",
307 serial->type->description);
308 kfree(result);
309 kfree(command);
310 return -ENODEV;
311
312 no_command_private:
313 kfree(result);
314 no_result_buffer:
315 kfree(command);
316 no_command_buffer:
317 return -ENOMEM;
318 }
319
whiteheat_release(struct usb_serial * serial)320 static void whiteheat_release(struct usb_serial *serial)
321 {
322 struct usb_serial_port *command_port;
323
324 /* free up our private data for our command port */
325 command_port = serial->port[COMMAND_PORT];
326 kfree(usb_get_serial_port_data(command_port));
327 }
328
whiteheat_port_probe(struct usb_serial_port * port)329 static int whiteheat_port_probe(struct usb_serial_port *port)
330 {
331 struct whiteheat_private *info;
332
333 info = kzalloc(sizeof(*info), GFP_KERNEL);
334 if (!info)
335 return -ENOMEM;
336
337 usb_set_serial_port_data(port, info);
338
339 return 0;
340 }
341
whiteheat_port_remove(struct usb_serial_port * port)342 static void whiteheat_port_remove(struct usb_serial_port *port)
343 {
344 struct whiteheat_private *info;
345
346 info = usb_get_serial_port_data(port);
347 kfree(info);
348 }
349
whiteheat_open(struct tty_struct * tty,struct usb_serial_port * port)350 static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
351 {
352 int retval;
353
354 retval = start_command_port(port->serial);
355 if (retval)
356 goto exit;
357
358 /* send an open port command */
359 retval = firm_open(port);
360 if (retval) {
361 stop_command_port(port->serial);
362 goto exit;
363 }
364
365 retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX);
366 if (retval) {
367 firm_close(port);
368 stop_command_port(port->serial);
369 goto exit;
370 }
371
372 if (tty)
373 firm_setup_port(tty);
374
375 /* Work around HCD bugs */
376 usb_clear_halt(port->serial->dev, port->read_urb->pipe);
377 usb_clear_halt(port->serial->dev, port->write_urb->pipe);
378
379 retval = usb_serial_generic_open(tty, port);
380 if (retval) {
381 firm_close(port);
382 stop_command_port(port->serial);
383 goto exit;
384 }
385 exit:
386 return retval;
387 }
388
389
whiteheat_close(struct usb_serial_port * port)390 static void whiteheat_close(struct usb_serial_port *port)
391 {
392 firm_report_tx_done(port);
393 firm_close(port);
394
395 usb_serial_generic_close(port);
396
397 stop_command_port(port->serial);
398 }
399
whiteheat_tiocmget(struct tty_struct * tty)400 static int whiteheat_tiocmget(struct tty_struct *tty)
401 {
402 struct usb_serial_port *port = tty->driver_data;
403 struct whiteheat_private *info = usb_get_serial_port_data(port);
404 unsigned int modem_signals = 0;
405
406 firm_get_dtr_rts(port);
407 if (info->mcr & UART_MCR_DTR)
408 modem_signals |= TIOCM_DTR;
409 if (info->mcr & UART_MCR_RTS)
410 modem_signals |= TIOCM_RTS;
411
412 return modem_signals;
413 }
414
whiteheat_tiocmset(struct tty_struct * tty,unsigned int set,unsigned int clear)415 static int whiteheat_tiocmset(struct tty_struct *tty,
416 unsigned int set, unsigned int clear)
417 {
418 struct usb_serial_port *port = tty->driver_data;
419 struct whiteheat_private *info = usb_get_serial_port_data(port);
420
421 if (set & TIOCM_RTS)
422 info->mcr |= UART_MCR_RTS;
423 if (set & TIOCM_DTR)
424 info->mcr |= UART_MCR_DTR;
425
426 if (clear & TIOCM_RTS)
427 info->mcr &= ~UART_MCR_RTS;
428 if (clear & TIOCM_DTR)
429 info->mcr &= ~UART_MCR_DTR;
430
431 firm_set_dtr(port, info->mcr & UART_MCR_DTR);
432 firm_set_rts(port, info->mcr & UART_MCR_RTS);
433 return 0;
434 }
435
436
whiteheat_get_serial(struct tty_struct * tty,struct serial_struct * ss)437 static void whiteheat_get_serial(struct tty_struct *tty, struct serial_struct *ss)
438 {
439 ss->baud_base = 460800;
440 }
441
442
whiteheat_set_termios(struct tty_struct * tty,struct usb_serial_port * port,const struct ktermios * old_termios)443 static void whiteheat_set_termios(struct tty_struct *tty,
444 struct usb_serial_port *port,
445 const struct ktermios *old_termios)
446 {
447 firm_setup_port(tty);
448 }
449
whiteheat_break_ctl(struct tty_struct * tty,int break_state)450 static int whiteheat_break_ctl(struct tty_struct *tty, int break_state)
451 {
452 struct usb_serial_port *port = tty->driver_data;
453
454 return firm_set_break(port, break_state);
455 }
456
457
458 /*****************************************************************************
459 * Connect Tech's White Heat callback routines
460 *****************************************************************************/
command_port_write_callback(struct urb * urb)461 static void command_port_write_callback(struct urb *urb)
462 {
463 int status = urb->status;
464
465 if (status) {
466 dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status);
467 return;
468 }
469 }
470
471
command_port_read_callback(struct urb * urb)472 static void command_port_read_callback(struct urb *urb)
473 {
474 struct usb_serial_port *command_port = urb->context;
475 struct whiteheat_command_private *command_info;
476 int status = urb->status;
477 unsigned char *data = urb->transfer_buffer;
478 int result;
479
480 command_info = usb_get_serial_port_data(command_port);
481 if (!command_info) {
482 dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__);
483 return;
484 }
485 if (!urb->actual_length) {
486 dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__);
487 return;
488 }
489 if (status) {
490 dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status);
491 if (status != -ENOENT)
492 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
493 wake_up(&command_info->wait_command);
494 return;
495 }
496
497 usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data);
498
499 if (data[0] == WHITEHEAT_CMD_COMPLETE) {
500 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
501 wake_up(&command_info->wait_command);
502 } else if (data[0] == WHITEHEAT_CMD_FAILURE) {
503 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
504 wake_up(&command_info->wait_command);
505 } else if (data[0] == WHITEHEAT_EVENT) {
506 /* These are unsolicited reports from the firmware, hence no
507 waiting command to wakeup */
508 dev_dbg(&urb->dev->dev, "%s - event received\n", __func__);
509 } else if ((data[0] == WHITEHEAT_GET_DTR_RTS) &&
510 (urb->actual_length - 1 <= sizeof(command_info->result_buffer))) {
511 memcpy(command_info->result_buffer, &data[1],
512 urb->actual_length - 1);
513 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
514 wake_up(&command_info->wait_command);
515 } else
516 dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__);
517
518 /* Continue trying to always read */
519 result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
520 if (result)
521 dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n",
522 __func__, result);
523 }
524
525
526 /*****************************************************************************
527 * Connect Tech's White Heat firmware interface
528 *****************************************************************************/
firm_send_command(struct usb_serial_port * port,__u8 command,__u8 * data,__u8 datasize)529 static int firm_send_command(struct usb_serial_port *port, __u8 command,
530 __u8 *data, __u8 datasize)
531 {
532 struct usb_serial_port *command_port;
533 struct whiteheat_command_private *command_info;
534 struct whiteheat_private *info;
535 struct device *dev = &port->dev;
536 __u8 *transfer_buffer;
537 int retval = 0;
538 int t;
539
540 dev_dbg(dev, "%s - command %d\n", __func__, command);
541
542 command_port = port->serial->port[COMMAND_PORT];
543 command_info = usb_get_serial_port_data(command_port);
544
545 if (command_port->bulk_out_size < datasize + 1)
546 return -EIO;
547
548 mutex_lock(&command_info->mutex);
549 command_info->command_finished = false;
550
551 transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
552 transfer_buffer[0] = command;
553 memcpy(&transfer_buffer[1], data, datasize);
554 command_port->write_urb->transfer_buffer_length = datasize + 1;
555 retval = usb_submit_urb(command_port->write_urb, GFP_NOIO);
556 if (retval) {
557 dev_dbg(dev, "%s - submit urb failed\n", __func__);
558 goto exit;
559 }
560
561 /* wait for the command to complete */
562 t = wait_event_timeout(command_info->wait_command,
563 (bool)command_info->command_finished, COMMAND_TIMEOUT);
564 if (!t)
565 usb_kill_urb(command_port->write_urb);
566
567 if (command_info->command_finished == false) {
568 dev_dbg(dev, "%s - command timed out.\n", __func__);
569 retval = -ETIMEDOUT;
570 goto exit;
571 }
572
573 if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) {
574 dev_dbg(dev, "%s - command failed.\n", __func__);
575 retval = -EIO;
576 goto exit;
577 }
578
579 if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
580 dev_dbg(dev, "%s - command completed.\n", __func__);
581 switch (command) {
582 case WHITEHEAT_GET_DTR_RTS:
583 info = usb_get_serial_port_data(port);
584 info->mcr = command_info->result_buffer[0];
585 break;
586 }
587 }
588 exit:
589 mutex_unlock(&command_info->mutex);
590 return retval;
591 }
592
593
firm_open(struct usb_serial_port * port)594 static int firm_open(struct usb_serial_port *port)
595 {
596 struct whiteheat_simple open_command;
597
598 open_command.port = port->port_number + 1;
599 return firm_send_command(port, WHITEHEAT_OPEN,
600 (__u8 *)&open_command, sizeof(open_command));
601 }
602
603
firm_close(struct usb_serial_port * port)604 static int firm_close(struct usb_serial_port *port)
605 {
606 struct whiteheat_simple close_command;
607
608 close_command.port = port->port_number + 1;
609 return firm_send_command(port, WHITEHEAT_CLOSE,
610 (__u8 *)&close_command, sizeof(close_command));
611 }
612
613
firm_setup_port(struct tty_struct * tty)614 static void firm_setup_port(struct tty_struct *tty)
615 {
616 struct usb_serial_port *port = tty->driver_data;
617 struct device *dev = &port->dev;
618 struct whiteheat_port_settings port_settings;
619 unsigned int cflag = tty->termios.c_cflag;
620 speed_t baud;
621
622 port_settings.port = port->port_number + 1;
623
624 port_settings.bits = tty_get_char_size(cflag);
625 dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits);
626
627 /* determine the parity */
628 if (cflag & PARENB)
629 if (cflag & CMSPAR)
630 if (cflag & PARODD)
631 port_settings.parity = WHITEHEAT_PAR_MARK;
632 else
633 port_settings.parity = WHITEHEAT_PAR_SPACE;
634 else
635 if (cflag & PARODD)
636 port_settings.parity = WHITEHEAT_PAR_ODD;
637 else
638 port_settings.parity = WHITEHEAT_PAR_EVEN;
639 else
640 port_settings.parity = WHITEHEAT_PAR_NONE;
641 dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity);
642
643 /* figure out the stop bits requested */
644 if (cflag & CSTOPB)
645 port_settings.stop = 2;
646 else
647 port_settings.stop = 1;
648 dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop);
649
650 /* figure out the flow control settings */
651 if (cflag & CRTSCTS)
652 port_settings.hflow = (WHITEHEAT_HFLOW_CTS |
653 WHITEHEAT_HFLOW_RTS);
654 else
655 port_settings.hflow = WHITEHEAT_HFLOW_NONE;
656 dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__,
657 (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "",
658 (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
659 (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
660 (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
661
662 /* determine software flow control */
663 if (I_IXOFF(tty))
664 port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
665 else
666 port_settings.sflow = WHITEHEAT_SFLOW_NONE;
667 dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow);
668
669 port_settings.xon = START_CHAR(tty);
670 port_settings.xoff = STOP_CHAR(tty);
671 dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff);
672
673 /* get the baud rate wanted */
674 baud = tty_get_baud_rate(tty);
675 port_settings.baud = cpu_to_le32(baud);
676 dev_dbg(dev, "%s - baud rate = %u\n", __func__, baud);
677
678 /* fixme: should set validated settings */
679 tty_encode_baud_rate(tty, baud, baud);
680
681 /* handle any settings that aren't specified in the tty structure */
682 port_settings.lloop = 0;
683
684 /* now send the message to the device */
685 firm_send_command(port, WHITEHEAT_SETUP_PORT,
686 (__u8 *)&port_settings, sizeof(port_settings));
687 }
688
689
firm_set_rts(struct usb_serial_port * port,__u8 onoff)690 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff)
691 {
692 struct whiteheat_set_rdb rts_command;
693
694 rts_command.port = port->port_number + 1;
695 rts_command.state = onoff;
696 return firm_send_command(port, WHITEHEAT_SET_RTS,
697 (__u8 *)&rts_command, sizeof(rts_command));
698 }
699
700
firm_set_dtr(struct usb_serial_port * port,__u8 onoff)701 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff)
702 {
703 struct whiteheat_set_rdb dtr_command;
704
705 dtr_command.port = port->port_number + 1;
706 dtr_command.state = onoff;
707 return firm_send_command(port, WHITEHEAT_SET_DTR,
708 (__u8 *)&dtr_command, sizeof(dtr_command));
709 }
710
711
firm_set_break(struct usb_serial_port * port,__u8 onoff)712 static int firm_set_break(struct usb_serial_port *port, __u8 onoff)
713 {
714 struct whiteheat_set_rdb break_command;
715
716 break_command.port = port->port_number + 1;
717 break_command.state = onoff;
718 return firm_send_command(port, WHITEHEAT_SET_BREAK,
719 (__u8 *)&break_command, sizeof(break_command));
720 }
721
722
firm_purge(struct usb_serial_port * port,__u8 rxtx)723 static int firm_purge(struct usb_serial_port *port, __u8 rxtx)
724 {
725 struct whiteheat_purge purge_command;
726
727 purge_command.port = port->port_number + 1;
728 purge_command.what = rxtx;
729 return firm_send_command(port, WHITEHEAT_PURGE,
730 (__u8 *)&purge_command, sizeof(purge_command));
731 }
732
733
firm_get_dtr_rts(struct usb_serial_port * port)734 static int firm_get_dtr_rts(struct usb_serial_port *port)
735 {
736 struct whiteheat_simple get_dr_command;
737
738 get_dr_command.port = port->port_number + 1;
739 return firm_send_command(port, WHITEHEAT_GET_DTR_RTS,
740 (__u8 *)&get_dr_command, sizeof(get_dr_command));
741 }
742
743
firm_report_tx_done(struct usb_serial_port * port)744 static int firm_report_tx_done(struct usb_serial_port *port)
745 {
746 struct whiteheat_simple close_command;
747
748 close_command.port = port->port_number + 1;
749 return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE,
750 (__u8 *)&close_command, sizeof(close_command));
751 }
752
753
754 /*****************************************************************************
755 * Connect Tech's White Heat utility functions
756 *****************************************************************************/
start_command_port(struct usb_serial * serial)757 static int start_command_port(struct usb_serial *serial)
758 {
759 struct usb_serial_port *command_port;
760 struct whiteheat_command_private *command_info;
761 int retval = 0;
762
763 command_port = serial->port[COMMAND_PORT];
764 command_info = usb_get_serial_port_data(command_port);
765 mutex_lock(&command_info->mutex);
766 if (!command_info->port_running) {
767 /* Work around HCD bugs */
768 usb_clear_halt(serial->dev, command_port->read_urb->pipe);
769
770 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
771 if (retval) {
772 dev_err(&serial->dev->dev,
773 "%s - failed submitting read urb, error %d\n",
774 __func__, retval);
775 goto exit;
776 }
777 }
778 command_info->port_running++;
779
780 exit:
781 mutex_unlock(&command_info->mutex);
782 return retval;
783 }
784
785
stop_command_port(struct usb_serial * serial)786 static void stop_command_port(struct usb_serial *serial)
787 {
788 struct usb_serial_port *command_port;
789 struct whiteheat_command_private *command_info;
790
791 command_port = serial->port[COMMAND_PORT];
792 command_info = usb_get_serial_port_data(command_port);
793 mutex_lock(&command_info->mutex);
794 command_info->port_running--;
795 if (!command_info->port_running)
796 usb_kill_urb(command_port->read_urb);
797 mutex_unlock(&command_info->mutex);
798 }
799
800 module_usb_serial_driver(serial_drivers, id_table_combined);
801
802 MODULE_AUTHOR(DRIVER_AUTHOR);
803 MODULE_DESCRIPTION(DRIVER_DESC);
804 MODULE_LICENSE("GPL");
805
806 MODULE_FIRMWARE("whiteheat.fw");
807 MODULE_FIRMWARE("whiteheat_loader.fw");
808