1 /* 2 * spcp8x5 USB to serial adaptor driver 3 * 4 * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com) 5 * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn) 6 * Copyright (C) 2006 S1 Corp. 7 * 8 * Original driver for 2.6.10 pl2303 driver by 9 * Greg Kroah-Hartman (greg@kroah.com) 10 * Changes for 2.6.20 by Harald Klein <hari@vt100.at> 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License as published by 14 * the Free Software Foundation; either version 2 of the License, or 15 * (at your option) any later version. 16 */ 17 #include <linux/kernel.h> 18 #include <linux/errno.h> 19 #include <linux/init.h> 20 #include <linux/slab.h> 21 #include <linux/tty.h> 22 #include <linux/tty_driver.h> 23 #include <linux/tty_flip.h> 24 #include <linux/module.h> 25 #include <linux/spinlock.h> 26 #include <linux/usb.h> 27 #include <linux/usb/serial.h> 28 29 #define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" 30 31 #define SPCP825_QUIRK_NO_UART_STATUS 0x01 32 #define SPCP825_QUIRK_NO_WORK_MODE 0x02 33 34 #define SPCP8x5_007_VID 0x04FC 35 #define SPCP8x5_007_PID 0x0201 36 #define SPCP8x5_008_VID 0x04fc 37 #define SPCP8x5_008_PID 0x0235 38 #define SPCP8x5_PHILIPS_VID 0x0471 39 #define SPCP8x5_PHILIPS_PID 0x081e 40 #define SPCP8x5_INTERMATIC_VID 0x04FC 41 #define SPCP8x5_INTERMATIC_PID 0x0204 42 #define SPCP8x5_835_VID 0x04fc 43 #define SPCP8x5_835_PID 0x0231 44 45 static const struct usb_device_id id_table[] = { 46 { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)}, 47 { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)}, 48 { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)}, 49 { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)}, 50 { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID), 51 .driver_info = SPCP825_QUIRK_NO_UART_STATUS | 52 SPCP825_QUIRK_NO_WORK_MODE }, 53 { } /* Terminating entry */ 54 }; 55 MODULE_DEVICE_TABLE(usb, id_table); 56 57 struct spcp8x5_usb_ctrl_arg { 58 u8 type; 59 u8 cmd; 60 u8 cmd_type; 61 u16 value; 62 u16 index; 63 u16 length; 64 }; 65 66 67 /* spcp8x5 spec register define */ 68 #define MCR_CONTROL_LINE_RTS 0x02 69 #define MCR_CONTROL_LINE_DTR 0x01 70 #define MCR_DTR 0x01 71 #define MCR_RTS 0x02 72 73 #define MSR_STATUS_LINE_DCD 0x80 74 #define MSR_STATUS_LINE_RI 0x40 75 #define MSR_STATUS_LINE_DSR 0x20 76 #define MSR_STATUS_LINE_CTS 0x10 77 78 /* verdor command here , we should define myself */ 79 #define SET_DEFAULT 0x40 80 #define SET_DEFAULT_TYPE 0x20 81 82 #define SET_UART_FORMAT 0x40 83 #define SET_UART_FORMAT_TYPE 0x21 84 #define SET_UART_FORMAT_SIZE_5 0x00 85 #define SET_UART_FORMAT_SIZE_6 0x01 86 #define SET_UART_FORMAT_SIZE_7 0x02 87 #define SET_UART_FORMAT_SIZE_8 0x03 88 #define SET_UART_FORMAT_STOP_1 0x00 89 #define SET_UART_FORMAT_STOP_2 0x04 90 #define SET_UART_FORMAT_PAR_NONE 0x00 91 #define SET_UART_FORMAT_PAR_ODD 0x10 92 #define SET_UART_FORMAT_PAR_EVEN 0x30 93 #define SET_UART_FORMAT_PAR_MASK 0xD0 94 #define SET_UART_FORMAT_PAR_SPACE 0x90 95 96 #define GET_UART_STATUS_TYPE 0xc0 97 #define GET_UART_STATUS 0x22 98 #define GET_UART_STATUS_MSR 0x06 99 100 #define SET_UART_STATUS 0x40 101 #define SET_UART_STATUS_TYPE 0x23 102 #define SET_UART_STATUS_MCR 0x0004 103 #define SET_UART_STATUS_MCR_DTR 0x01 104 #define SET_UART_STATUS_MCR_RTS 0x02 105 #define SET_UART_STATUS_MCR_LOOP 0x10 106 107 #define SET_WORKING_MODE 0x40 108 #define SET_WORKING_MODE_TYPE 0x24 109 #define SET_WORKING_MODE_U2C 0x00 110 #define SET_WORKING_MODE_RS485 0x01 111 #define SET_WORKING_MODE_PDMA 0x02 112 #define SET_WORKING_MODE_SPP 0x03 113 114 #define SET_FLOWCTL_CHAR 0x40 115 #define SET_FLOWCTL_CHAR_TYPE 0x25 116 117 #define GET_VERSION 0xc0 118 #define GET_VERSION_TYPE 0x26 119 120 #define SET_REGISTER 0x40 121 #define SET_REGISTER_TYPE 0x27 122 123 #define GET_REGISTER 0xc0 124 #define GET_REGISTER_TYPE 0x28 125 126 #define SET_RAM 0x40 127 #define SET_RAM_TYPE 0x31 128 129 #define GET_RAM 0xc0 130 #define GET_RAM_TYPE 0x32 131 132 /* how come ??? */ 133 #define UART_STATE 0x08 134 #define UART_STATE_TRANSIENT_MASK 0x75 135 #define UART_DCD 0x01 136 #define UART_DSR 0x02 137 #define UART_BREAK_ERROR 0x04 138 #define UART_RING 0x08 139 #define UART_FRAME_ERROR 0x10 140 #define UART_PARITY_ERROR 0x20 141 #define UART_OVERRUN_ERROR 0x40 142 #define UART_CTS 0x80 143 144 struct spcp8x5_private { 145 unsigned quirks; 146 spinlock_t lock; 147 u8 line_control; 148 }; 149 150 static int spcp8x5_probe(struct usb_serial *serial, 151 const struct usb_device_id *id) 152 { 153 usb_set_serial_data(serial, (void *)id); 154 155 return 0; 156 } 157 158 static int spcp8x5_port_probe(struct usb_serial_port *port) 159 { 160 const struct usb_device_id *id = usb_get_serial_data(port->serial); 161 struct spcp8x5_private *priv; 162 163 priv = kzalloc(sizeof(*priv), GFP_KERNEL); 164 if (!priv) 165 return -ENOMEM; 166 167 spin_lock_init(&priv->lock); 168 priv->quirks = id->driver_info; 169 170 usb_set_serial_port_data(port, priv); 171 172 return 0; 173 } 174 175 static int spcp8x5_port_remove(struct usb_serial_port *port) 176 { 177 struct spcp8x5_private *priv; 178 179 priv = usb_get_serial_port_data(port); 180 kfree(priv); 181 182 return 0; 183 } 184 185 static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr) 186 { 187 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 188 struct usb_device *dev = port->serial->dev; 189 int retval; 190 191 if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) 192 return -EPERM; 193 194 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 195 SET_UART_STATUS_TYPE, SET_UART_STATUS, 196 mcr, 0x04, NULL, 0, 100); 197 if (retval != 0) { 198 dev_err(&port->dev, "failed to set control lines: %d\n", 199 retval); 200 } 201 return retval; 202 } 203 204 static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status) 205 { 206 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 207 struct usb_device *dev = port->serial->dev; 208 u8 *buf; 209 int ret; 210 211 if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) 212 return -EPERM; 213 214 buf = kzalloc(1, GFP_KERNEL); 215 if (!buf) 216 return -ENOMEM; 217 218 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 219 GET_UART_STATUS, GET_UART_STATUS_TYPE, 220 0, GET_UART_STATUS_MSR, buf, 1, 100); 221 if (ret < 0) 222 dev_err(&port->dev, "failed to get modem status: %d", ret); 223 224 dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x", ret, *buf); 225 *status = *buf; 226 kfree(buf); 227 228 return ret; 229 } 230 231 static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value, 232 u16 index) 233 { 234 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 235 struct usb_device *dev = port->serial->dev; 236 int ret; 237 238 if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE) 239 return; 240 241 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 242 SET_WORKING_MODE_TYPE, SET_WORKING_MODE, 243 value, index, NULL, 0, 100); 244 dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index); 245 if (ret < 0) 246 dev_err(&port->dev, "failed to set work mode: %d\n", ret); 247 } 248 249 static int spcp8x5_carrier_raised(struct usb_serial_port *port) 250 { 251 u8 msr; 252 int ret; 253 254 ret = spcp8x5_get_msr(port, &msr); 255 if (ret || msr & MSR_STATUS_LINE_DCD) 256 return 1; 257 258 return 0; 259 } 260 261 static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on) 262 { 263 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 264 unsigned long flags; 265 u8 control; 266 267 spin_lock_irqsave(&priv->lock, flags); 268 if (on) 269 priv->line_control = MCR_CONTROL_LINE_DTR 270 | MCR_CONTROL_LINE_RTS; 271 else 272 priv->line_control &= ~ (MCR_CONTROL_LINE_DTR 273 | MCR_CONTROL_LINE_RTS); 274 control = priv->line_control; 275 spin_unlock_irqrestore(&priv->lock, flags); 276 spcp8x5_set_ctrl_line(port, control); 277 } 278 279 static void spcp8x5_init_termios(struct tty_struct *tty) 280 { 281 tty->termios = tty_std_termios; 282 tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; 283 tty->termios.c_ispeed = 115200; 284 tty->termios.c_ospeed = 115200; 285 } 286 287 static void spcp8x5_set_termios(struct tty_struct *tty, 288 struct usb_serial_port *port, struct ktermios *old_termios) 289 { 290 struct usb_serial *serial = port->serial; 291 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 292 unsigned long flags; 293 unsigned int cflag = tty->termios.c_cflag; 294 unsigned short uartdata; 295 unsigned char buf[2] = {0, 0}; 296 int baud; 297 int i; 298 u8 control; 299 300 /* check that they really want us to change something */ 301 if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) 302 return; 303 304 /* set DTR/RTS active */ 305 spin_lock_irqsave(&priv->lock, flags); 306 control = priv->line_control; 307 if (old_termios && (old_termios->c_cflag & CBAUD) == B0) { 308 priv->line_control |= MCR_DTR; 309 if (!(old_termios->c_cflag & CRTSCTS)) 310 priv->line_control |= MCR_RTS; 311 } 312 if (control != priv->line_control) { 313 control = priv->line_control; 314 spin_unlock_irqrestore(&priv->lock, flags); 315 spcp8x5_set_ctrl_line(port, control); 316 } else { 317 spin_unlock_irqrestore(&priv->lock, flags); 318 } 319 320 /* Set Baud Rate */ 321 baud = tty_get_baud_rate(tty); 322 switch (baud) { 323 case 300: buf[0] = 0x00; break; 324 case 600: buf[0] = 0x01; break; 325 case 1200: buf[0] = 0x02; break; 326 case 2400: buf[0] = 0x03; break; 327 case 4800: buf[0] = 0x04; break; 328 case 9600: buf[0] = 0x05; break; 329 case 19200: buf[0] = 0x07; break; 330 case 38400: buf[0] = 0x09; break; 331 case 57600: buf[0] = 0x0a; break; 332 case 115200: buf[0] = 0x0b; break; 333 case 230400: buf[0] = 0x0c; break; 334 case 460800: buf[0] = 0x0d; break; 335 case 921600: buf[0] = 0x0e; break; 336 /* case 1200000: buf[0] = 0x0f; break; */ 337 /* case 2400000: buf[0] = 0x10; break; */ 338 case 3000000: buf[0] = 0x11; break; 339 /* case 6000000: buf[0] = 0x12; break; */ 340 case 0: 341 case 1000000: 342 buf[0] = 0x0b; break; 343 default: 344 dev_err(&port->dev, "spcp825 driver does not support the " 345 "baudrate requested, using default of 9600.\n"); 346 } 347 348 /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */ 349 if (cflag & CSIZE) { 350 switch (cflag & CSIZE) { 351 case CS5: 352 buf[1] |= SET_UART_FORMAT_SIZE_5; 353 break; 354 case CS6: 355 buf[1] |= SET_UART_FORMAT_SIZE_6; 356 break; 357 case CS7: 358 buf[1] |= SET_UART_FORMAT_SIZE_7; 359 break; 360 default: 361 case CS8: 362 buf[1] |= SET_UART_FORMAT_SIZE_8; 363 break; 364 } 365 } 366 367 /* Set Stop bit2 : 0:1bit 1:2bit */ 368 buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 : 369 SET_UART_FORMAT_STOP_1; 370 371 /* Set Parity bit3-4 01:Odd 11:Even */ 372 if (cflag & PARENB) { 373 buf[1] |= (cflag & PARODD) ? 374 SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ; 375 } else { 376 buf[1] |= SET_UART_FORMAT_PAR_NONE; 377 } 378 uartdata = buf[0] | buf[1]<<8; 379 380 i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 381 SET_UART_FORMAT_TYPE, SET_UART_FORMAT, 382 uartdata, 0, NULL, 0, 100); 383 if (i < 0) 384 dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n", 385 uartdata, i); 386 dev_dbg(&port->dev, "0x21:0x40:0:0 %d\n", i); 387 388 if (cflag & CRTSCTS) { 389 /* enable hardware flow control */ 390 spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C); 391 } 392 } 393 394 static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) 395 { 396 struct usb_serial *serial = port->serial; 397 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 398 int ret; 399 400 usb_clear_halt(serial->dev, port->write_urb->pipe); 401 usb_clear_halt(serial->dev, port->read_urb->pipe); 402 403 ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 404 0x09, 0x00, 405 0x01, 0x00, NULL, 0x00, 100); 406 if (ret) 407 return ret; 408 409 spcp8x5_set_ctrl_line(port, priv->line_control); 410 411 if (tty) 412 spcp8x5_set_termios(tty, port, NULL); 413 414 port->port.drain_delay = 256; 415 416 return usb_serial_generic_open(tty, port); 417 } 418 419 static int spcp8x5_tiocmset(struct tty_struct *tty, 420 unsigned int set, unsigned int clear) 421 { 422 struct usb_serial_port *port = tty->driver_data; 423 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 424 unsigned long flags; 425 u8 control; 426 427 spin_lock_irqsave(&priv->lock, flags); 428 if (set & TIOCM_RTS) 429 priv->line_control |= MCR_RTS; 430 if (set & TIOCM_DTR) 431 priv->line_control |= MCR_DTR; 432 if (clear & TIOCM_RTS) 433 priv->line_control &= ~MCR_RTS; 434 if (clear & TIOCM_DTR) 435 priv->line_control &= ~MCR_DTR; 436 control = priv->line_control; 437 spin_unlock_irqrestore(&priv->lock, flags); 438 439 return spcp8x5_set_ctrl_line(port, control); 440 } 441 442 static int spcp8x5_tiocmget(struct tty_struct *tty) 443 { 444 struct usb_serial_port *port = tty->driver_data; 445 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 446 unsigned long flags; 447 unsigned int mcr; 448 u8 status; 449 unsigned int result; 450 451 result = spcp8x5_get_msr(port, &status); 452 if (result) 453 return result; 454 455 spin_lock_irqsave(&priv->lock, flags); 456 mcr = priv->line_control; 457 spin_unlock_irqrestore(&priv->lock, flags); 458 459 result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) 460 | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) 461 | ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0) 462 | ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0) 463 | ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0) 464 | ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0); 465 466 return result; 467 } 468 469 static struct usb_serial_driver spcp8x5_device = { 470 .driver = { 471 .owner = THIS_MODULE, 472 .name = "SPCP8x5", 473 }, 474 .id_table = id_table, 475 .num_ports = 1, 476 .open = spcp8x5_open, 477 .dtr_rts = spcp8x5_dtr_rts, 478 .carrier_raised = spcp8x5_carrier_raised, 479 .set_termios = spcp8x5_set_termios, 480 .init_termios = spcp8x5_init_termios, 481 .tiocmget = spcp8x5_tiocmget, 482 .tiocmset = spcp8x5_tiocmset, 483 .probe = spcp8x5_probe, 484 .port_probe = spcp8x5_port_probe, 485 .port_remove = spcp8x5_port_remove, 486 }; 487 488 static struct usb_serial_driver * const serial_drivers[] = { 489 &spcp8x5_device, NULL 490 }; 491 492 module_usb_serial_driver(serial_drivers, id_table); 493 494 MODULE_DESCRIPTION(DRIVER_DESC); 495 MODULE_LICENSE("GPL"); 496