1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * spcp8x5 USB to serial adaptor driver 4 * 5 * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com) 6 * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn) 7 * Copyright (C) 2006 S1 Corp. 8 * 9 * Original driver for 2.6.10 pl2303 driver by 10 * Greg Kroah-Hartman (greg@kroah.com) 11 * Changes for 2.6.20 by Harald Klein <hari@vt100.at> 12 */ 13 #include <linux/kernel.h> 14 #include <linux/errno.h> 15 #include <linux/slab.h> 16 #include <linux/tty.h> 17 #include <linux/tty_driver.h> 18 #include <linux/tty_flip.h> 19 #include <linux/module.h> 20 #include <linux/spinlock.h> 21 #include <linux/usb.h> 22 #include <linux/usb/serial.h> 23 24 #define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" 25 26 #define SPCP825_QUIRK_NO_UART_STATUS 0x01 27 #define SPCP825_QUIRK_NO_WORK_MODE 0x02 28 29 #define SPCP8x5_007_VID 0x04FC 30 #define SPCP8x5_007_PID 0x0201 31 #define SPCP8x5_008_VID 0x04fc 32 #define SPCP8x5_008_PID 0x0235 33 #define SPCP8x5_PHILIPS_VID 0x0471 34 #define SPCP8x5_PHILIPS_PID 0x081e 35 #define SPCP8x5_INTERMATIC_VID 0x04FC 36 #define SPCP8x5_INTERMATIC_PID 0x0204 37 #define SPCP8x5_835_VID 0x04fc 38 #define SPCP8x5_835_PID 0x0231 39 40 static const struct usb_device_id id_table[] = { 41 { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)}, 42 { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)}, 43 { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)}, 44 { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)}, 45 { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID), 46 .driver_info = SPCP825_QUIRK_NO_UART_STATUS | 47 SPCP825_QUIRK_NO_WORK_MODE }, 48 { } /* Terminating entry */ 49 }; 50 MODULE_DEVICE_TABLE(usb, id_table); 51 52 /* spcp8x5 spec register define */ 53 #define MCR_CONTROL_LINE_RTS 0x02 54 #define MCR_CONTROL_LINE_DTR 0x01 55 #define MCR_DTR 0x01 56 #define MCR_RTS 0x02 57 58 #define MSR_STATUS_LINE_DCD 0x80 59 #define MSR_STATUS_LINE_RI 0x40 60 #define MSR_STATUS_LINE_DSR 0x20 61 #define MSR_STATUS_LINE_CTS 0x10 62 63 /* verdor command here , we should define myself */ 64 #define SET_DEFAULT 0x40 65 #define SET_DEFAULT_TYPE 0x20 66 67 #define SET_UART_FORMAT 0x40 68 #define SET_UART_FORMAT_TYPE 0x21 69 #define SET_UART_FORMAT_SIZE_5 0x00 70 #define SET_UART_FORMAT_SIZE_6 0x01 71 #define SET_UART_FORMAT_SIZE_7 0x02 72 #define SET_UART_FORMAT_SIZE_8 0x03 73 #define SET_UART_FORMAT_STOP_1 0x00 74 #define SET_UART_FORMAT_STOP_2 0x04 75 #define SET_UART_FORMAT_PAR_NONE 0x00 76 #define SET_UART_FORMAT_PAR_ODD 0x10 77 #define SET_UART_FORMAT_PAR_EVEN 0x30 78 #define SET_UART_FORMAT_PAR_MASK 0xD0 79 #define SET_UART_FORMAT_PAR_SPACE 0x90 80 81 #define GET_UART_STATUS_TYPE 0xc0 82 #define GET_UART_STATUS 0x22 83 #define GET_UART_STATUS_MSR 0x06 84 85 #define SET_UART_STATUS 0x40 86 #define SET_UART_STATUS_TYPE 0x23 87 #define SET_UART_STATUS_MCR 0x0004 88 #define SET_UART_STATUS_MCR_DTR 0x01 89 #define SET_UART_STATUS_MCR_RTS 0x02 90 #define SET_UART_STATUS_MCR_LOOP 0x10 91 92 #define SET_WORKING_MODE 0x40 93 #define SET_WORKING_MODE_TYPE 0x24 94 #define SET_WORKING_MODE_U2C 0x00 95 #define SET_WORKING_MODE_RS485 0x01 96 #define SET_WORKING_MODE_PDMA 0x02 97 #define SET_WORKING_MODE_SPP 0x03 98 99 #define SET_FLOWCTL_CHAR 0x40 100 #define SET_FLOWCTL_CHAR_TYPE 0x25 101 102 #define GET_VERSION 0xc0 103 #define GET_VERSION_TYPE 0x26 104 105 #define SET_REGISTER 0x40 106 #define SET_REGISTER_TYPE 0x27 107 108 #define GET_REGISTER 0xc0 109 #define GET_REGISTER_TYPE 0x28 110 111 #define SET_RAM 0x40 112 #define SET_RAM_TYPE 0x31 113 114 #define GET_RAM 0xc0 115 #define GET_RAM_TYPE 0x32 116 117 /* how come ??? */ 118 #define UART_STATE 0x08 119 #define UART_STATE_TRANSIENT_MASK 0x75 120 #define UART_DCD 0x01 121 #define UART_DSR 0x02 122 #define UART_BREAK_ERROR 0x04 123 #define UART_RING 0x08 124 #define UART_FRAME_ERROR 0x10 125 #define UART_PARITY_ERROR 0x20 126 #define UART_OVERRUN_ERROR 0x40 127 #define UART_CTS 0x80 128 129 struct spcp8x5_private { 130 unsigned quirks; 131 spinlock_t lock; 132 u8 line_control; 133 }; 134 135 static int spcp8x5_probe(struct usb_serial *serial, 136 const struct usb_device_id *id) 137 { 138 usb_set_serial_data(serial, (void *)id); 139 140 return 0; 141 } 142 143 static int spcp8x5_port_probe(struct usb_serial_port *port) 144 { 145 const struct usb_device_id *id = usb_get_serial_data(port->serial); 146 struct spcp8x5_private *priv; 147 148 priv = kzalloc(sizeof(*priv), GFP_KERNEL); 149 if (!priv) 150 return -ENOMEM; 151 152 spin_lock_init(&priv->lock); 153 priv->quirks = id->driver_info; 154 155 usb_set_serial_port_data(port, priv); 156 157 port->port.drain_delay = 256; 158 159 return 0; 160 } 161 162 static void spcp8x5_port_remove(struct usb_serial_port *port) 163 { 164 struct spcp8x5_private *priv; 165 166 priv = usb_get_serial_port_data(port); 167 kfree(priv); 168 } 169 170 static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr) 171 { 172 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 173 struct usb_device *dev = port->serial->dev; 174 int retval; 175 176 if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) 177 return -EPERM; 178 179 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 180 SET_UART_STATUS_TYPE, SET_UART_STATUS, 181 mcr, 0x04, NULL, 0, 100); 182 if (retval != 0) { 183 dev_err(&port->dev, "failed to set control lines: %d\n", 184 retval); 185 } 186 return retval; 187 } 188 189 static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status) 190 { 191 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 192 struct usb_device *dev = port->serial->dev; 193 u8 *buf; 194 int ret; 195 196 if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) 197 return -EPERM; 198 199 buf = kzalloc(1, GFP_KERNEL); 200 if (!buf) 201 return -ENOMEM; 202 203 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 204 GET_UART_STATUS, GET_UART_STATUS_TYPE, 205 0, GET_UART_STATUS_MSR, buf, 1, 100); 206 if (ret < 1) { 207 dev_err(&port->dev, "failed to get modem status: %d\n", ret); 208 if (ret >= 0) 209 ret = -EIO; 210 goto out; 211 } 212 213 dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x\n", ret, *buf); 214 *status = *buf; 215 ret = 0; 216 out: 217 kfree(buf); 218 219 return ret; 220 } 221 222 static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value, 223 u16 index) 224 { 225 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 226 struct usb_device *dev = port->serial->dev; 227 int ret; 228 229 if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE) 230 return; 231 232 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 233 SET_WORKING_MODE_TYPE, SET_WORKING_MODE, 234 value, index, NULL, 0, 100); 235 dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index); 236 if (ret < 0) 237 dev_err(&port->dev, "failed to set work mode: %d\n", ret); 238 } 239 240 static int spcp8x5_carrier_raised(struct usb_serial_port *port) 241 { 242 u8 msr; 243 int ret; 244 245 ret = spcp8x5_get_msr(port, &msr); 246 if (ret || msr & MSR_STATUS_LINE_DCD) 247 return 1; 248 249 return 0; 250 } 251 252 static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on) 253 { 254 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 255 unsigned long flags; 256 u8 control; 257 258 spin_lock_irqsave(&priv->lock, flags); 259 if (on) 260 priv->line_control = MCR_CONTROL_LINE_DTR 261 | MCR_CONTROL_LINE_RTS; 262 else 263 priv->line_control &= ~ (MCR_CONTROL_LINE_DTR 264 | MCR_CONTROL_LINE_RTS); 265 control = priv->line_control; 266 spin_unlock_irqrestore(&priv->lock, flags); 267 spcp8x5_set_ctrl_line(port, control); 268 } 269 270 static void spcp8x5_init_termios(struct tty_struct *tty) 271 { 272 tty_encode_baud_rate(tty, 115200, 115200); 273 } 274 275 static void spcp8x5_set_termios(struct tty_struct *tty, 276 struct usb_serial_port *port, 277 const struct ktermios *old_termios) 278 { 279 struct usb_serial *serial = port->serial; 280 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 281 unsigned long flags; 282 unsigned int cflag = tty->termios.c_cflag; 283 unsigned short uartdata; 284 unsigned char buf[2] = {0, 0}; 285 int baud; 286 int i; 287 u8 control; 288 289 /* check that they really want us to change something */ 290 if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) 291 return; 292 293 /* set DTR/RTS active */ 294 spin_lock_irqsave(&priv->lock, flags); 295 control = priv->line_control; 296 if (old_termios && (old_termios->c_cflag & CBAUD) == B0) { 297 priv->line_control |= MCR_DTR; 298 if (!(old_termios->c_cflag & CRTSCTS)) 299 priv->line_control |= MCR_RTS; 300 } 301 if (control != priv->line_control) { 302 control = priv->line_control; 303 spin_unlock_irqrestore(&priv->lock, flags); 304 spcp8x5_set_ctrl_line(port, control); 305 } else { 306 spin_unlock_irqrestore(&priv->lock, flags); 307 } 308 309 /* Set Baud Rate */ 310 baud = tty_get_baud_rate(tty); 311 switch (baud) { 312 case 300: buf[0] = 0x00; break; 313 case 600: buf[0] = 0x01; break; 314 case 1200: buf[0] = 0x02; break; 315 case 2400: buf[0] = 0x03; break; 316 case 4800: buf[0] = 0x04; break; 317 case 9600: buf[0] = 0x05; break; 318 case 19200: buf[0] = 0x07; break; 319 case 38400: buf[0] = 0x09; break; 320 case 57600: buf[0] = 0x0a; break; 321 case 115200: buf[0] = 0x0b; break; 322 case 230400: buf[0] = 0x0c; break; 323 case 460800: buf[0] = 0x0d; break; 324 case 921600: buf[0] = 0x0e; break; 325 /* case 1200000: buf[0] = 0x0f; break; */ 326 /* case 2400000: buf[0] = 0x10; break; */ 327 case 3000000: buf[0] = 0x11; break; 328 /* case 6000000: buf[0] = 0x12; break; */ 329 case 0: 330 case 1000000: 331 buf[0] = 0x0b; break; 332 default: 333 dev_err(&port->dev, "unsupported baudrate, using 9600\n"); 334 } 335 336 /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */ 337 switch (cflag & CSIZE) { 338 case CS5: 339 buf[1] |= SET_UART_FORMAT_SIZE_5; 340 break; 341 case CS6: 342 buf[1] |= SET_UART_FORMAT_SIZE_6; 343 break; 344 case CS7: 345 buf[1] |= SET_UART_FORMAT_SIZE_7; 346 break; 347 default: 348 case CS8: 349 buf[1] |= SET_UART_FORMAT_SIZE_8; 350 break; 351 } 352 353 /* Set Stop bit2 : 0:1bit 1:2bit */ 354 buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 : 355 SET_UART_FORMAT_STOP_1; 356 357 /* Set Parity bit3-4 01:Odd 11:Even */ 358 if (cflag & PARENB) { 359 buf[1] |= (cflag & PARODD) ? 360 SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ; 361 } else { 362 buf[1] |= SET_UART_FORMAT_PAR_NONE; 363 } 364 uartdata = buf[0] | buf[1]<<8; 365 366 i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 367 SET_UART_FORMAT_TYPE, SET_UART_FORMAT, 368 uartdata, 0, NULL, 0, 100); 369 if (i < 0) 370 dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n", 371 uartdata, i); 372 dev_dbg(&port->dev, "0x21:0x40:0:0 %d\n", i); 373 374 if (cflag & CRTSCTS) { 375 /* enable hardware flow control */ 376 spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C); 377 } 378 } 379 380 static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) 381 { 382 struct usb_serial *serial = port->serial; 383 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 384 int ret; 385 386 usb_clear_halt(serial->dev, port->write_urb->pipe); 387 usb_clear_halt(serial->dev, port->read_urb->pipe); 388 389 ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 390 0x09, 0x00, 391 0x01, 0x00, NULL, 0x00, 100); 392 if (ret) 393 return ret; 394 395 spcp8x5_set_ctrl_line(port, priv->line_control); 396 397 if (tty) 398 spcp8x5_set_termios(tty, port, NULL); 399 400 return usb_serial_generic_open(tty, port); 401 } 402 403 static int spcp8x5_tiocmset(struct tty_struct *tty, 404 unsigned int set, unsigned int clear) 405 { 406 struct usb_serial_port *port = tty->driver_data; 407 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 408 unsigned long flags; 409 u8 control; 410 411 spin_lock_irqsave(&priv->lock, flags); 412 if (set & TIOCM_RTS) 413 priv->line_control |= MCR_RTS; 414 if (set & TIOCM_DTR) 415 priv->line_control |= MCR_DTR; 416 if (clear & TIOCM_RTS) 417 priv->line_control &= ~MCR_RTS; 418 if (clear & TIOCM_DTR) 419 priv->line_control &= ~MCR_DTR; 420 control = priv->line_control; 421 spin_unlock_irqrestore(&priv->lock, flags); 422 423 return spcp8x5_set_ctrl_line(port, control); 424 } 425 426 static int spcp8x5_tiocmget(struct tty_struct *tty) 427 { 428 struct usb_serial_port *port = tty->driver_data; 429 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 430 unsigned long flags; 431 unsigned int mcr; 432 u8 status; 433 unsigned int result; 434 435 result = spcp8x5_get_msr(port, &status); 436 if (result) 437 return result; 438 439 spin_lock_irqsave(&priv->lock, flags); 440 mcr = priv->line_control; 441 spin_unlock_irqrestore(&priv->lock, flags); 442 443 result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) 444 | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) 445 | ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0) 446 | ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0) 447 | ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0) 448 | ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0); 449 450 return result; 451 } 452 453 static struct usb_serial_driver spcp8x5_device = { 454 .driver = { 455 .owner = THIS_MODULE, 456 .name = "SPCP8x5", 457 }, 458 .id_table = id_table, 459 .num_ports = 1, 460 .num_bulk_in = 1, 461 .num_bulk_out = 1, 462 .open = spcp8x5_open, 463 .dtr_rts = spcp8x5_dtr_rts, 464 .carrier_raised = spcp8x5_carrier_raised, 465 .set_termios = spcp8x5_set_termios, 466 .init_termios = spcp8x5_init_termios, 467 .tiocmget = spcp8x5_tiocmget, 468 .tiocmset = spcp8x5_tiocmset, 469 .probe = spcp8x5_probe, 470 .port_probe = spcp8x5_port_probe, 471 .port_remove = spcp8x5_port_remove, 472 }; 473 474 static struct usb_serial_driver * const serial_drivers[] = { 475 &spcp8x5_device, NULL 476 }; 477 478 module_usb_serial_driver(serial_drivers, id_table); 479 480 MODULE_DESCRIPTION(DRIVER_DESC); 481 MODULE_LICENSE("GPL"); 482