1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Ours Technology Inc. OTi-6858 USB to serial adapter driver. 4 * 5 * Copyleft (C) 2007 Kees Lemmens (adapted for kernel 2.6.20) 6 * Copyright (C) 2006 Tomasz Michal Lukaszewski (FIXME: add e-mail) 7 * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) 8 * Copyright (C) 2003 IBM Corp. 9 * 10 * Many thanks to the authors of pl2303 driver: all functions in this file 11 * are heavily based on pl2303 code, buffering code is a 1-to-1 copy. 12 * 13 * Warning! You use this driver on your own risk! The only official 14 * description of this device I have is datasheet from manufacturer, 15 * and it doesn't contain almost any information needed to write a driver. 16 * Almost all knowlegde used while writing this driver was gathered by: 17 * - analyzing traffic between device and the M$ Windows 2000 driver, 18 * - trying different bit combinations and checking pin states 19 * with a voltmeter, 20 * - receiving malformed frames and producing buffer overflows 21 * to learn how errors are reported, 22 * So, THIS CODE CAN DESTROY OTi-6858 AND ANY OTHER DEVICES, THAT ARE 23 * CONNECTED TO IT! 24 * 25 * See Documentation/usb/usb-serial.rst for more information on using this 26 * driver 27 * 28 * TODO: 29 * - implement correct flushing for ioctls and oti6858_close() 30 * - check how errors (rx overflow, parity error, framing error) are reported 31 * - implement oti6858_break_ctl() 32 * - implement more ioctls 33 * - test/implement flow control 34 * - allow setting custom baud rates 35 */ 36 37 #include <linux/kernel.h> 38 #include <linux/errno.h> 39 #include <linux/slab.h> 40 #include <linux/tty.h> 41 #include <linux/tty_driver.h> 42 #include <linux/tty_flip.h> 43 #include <linux/serial.h> 44 #include <linux/module.h> 45 #include <linux/moduleparam.h> 46 #include <linux/spinlock.h> 47 #include <linux/usb.h> 48 #include <linux/usb/serial.h> 49 #include <linux/uaccess.h> 50 #include <linux/kfifo.h> 51 #include "oti6858.h" 52 53 #define OTI6858_DESCRIPTION \ 54 "Ours Technology Inc. OTi-6858 USB to serial adapter driver" 55 #define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>" 56 57 static const struct usb_device_id id_table[] = { 58 { USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) }, 59 { } 60 }; 61 62 MODULE_DEVICE_TABLE(usb, id_table); 63 64 /* requests */ 65 #define OTI6858_REQ_GET_STATUS (USB_DIR_IN | USB_TYPE_VENDOR | 0x00) 66 #define OTI6858_REQ_T_GET_STATUS 0x01 67 68 #define OTI6858_REQ_SET_LINE (USB_DIR_OUT | USB_TYPE_VENDOR | 0x00) 69 #define OTI6858_REQ_T_SET_LINE 0x00 70 71 #define OTI6858_REQ_CHECK_TXBUFF (USB_DIR_IN | USB_TYPE_VENDOR | 0x01) 72 #define OTI6858_REQ_T_CHECK_TXBUFF 0x00 73 74 /* format of the control packet */ 75 struct oti6858_control_pkt { 76 __le16 divisor; /* baud rate = 96000000 / (16 * divisor), LE */ 77 #define OTI6858_MAX_BAUD_RATE 3000000 78 u8 frame_fmt; 79 #define FMT_STOP_BITS_MASK 0xc0 80 #define FMT_STOP_BITS_1 0x00 81 #define FMT_STOP_BITS_2 0x40 /* 1.5 stop bits if FMT_DATA_BITS_5 */ 82 #define FMT_PARITY_MASK 0x38 83 #define FMT_PARITY_NONE 0x00 84 #define FMT_PARITY_ODD 0x08 85 #define FMT_PARITY_EVEN 0x18 86 #define FMT_PARITY_MARK 0x28 87 #define FMT_PARITY_SPACE 0x38 88 #define FMT_DATA_BITS_MASK 0x03 89 #define FMT_DATA_BITS_5 0x00 90 #define FMT_DATA_BITS_6 0x01 91 #define FMT_DATA_BITS_7 0x02 92 #define FMT_DATA_BITS_8 0x03 93 u8 something; /* always equals 0x43 */ 94 u8 control; /* settings of flow control lines */ 95 #define CONTROL_MASK 0x0c 96 #define CONTROL_DTR_HIGH 0x08 97 #define CONTROL_RTS_HIGH 0x04 98 u8 tx_status; 99 #define TX_BUFFER_EMPTIED 0x09 100 u8 pin_state; 101 #define PIN_MASK 0x3f 102 #define PIN_MSR_MASK 0x1b 103 #define PIN_RTS 0x20 /* output pin */ 104 #define PIN_CTS 0x10 /* input pin, active low */ 105 #define PIN_DSR 0x08 /* input pin, active low */ 106 #define PIN_DTR 0x04 /* output pin */ 107 #define PIN_RI 0x02 /* input pin, active low */ 108 #define PIN_DCD 0x01 /* input pin, active low */ 109 u8 rx_bytes_avail; /* number of bytes in rx buffer */; 110 }; 111 112 #define OTI6858_CTRL_PKT_SIZE sizeof(struct oti6858_control_pkt) 113 #define OTI6858_CTRL_EQUALS_PENDING(a, priv) \ 114 (((a)->divisor == (priv)->pending_setup.divisor) \ 115 && ((a)->control == (priv)->pending_setup.control) \ 116 && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt)) 117 118 /* function prototypes */ 119 static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port); 120 static void oti6858_close(struct usb_serial_port *port); 121 static void oti6858_set_termios(struct tty_struct *tty, 122 struct usb_serial_port *port, struct ktermios *old); 123 static void oti6858_init_termios(struct tty_struct *tty); 124 static void oti6858_read_int_callback(struct urb *urb); 125 static void oti6858_read_bulk_callback(struct urb *urb); 126 static void oti6858_write_bulk_callback(struct urb *urb); 127 static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port, 128 const unsigned char *buf, int count); 129 static int oti6858_write_room(struct tty_struct *tty); 130 static int oti6858_chars_in_buffer(struct tty_struct *tty); 131 static int oti6858_tiocmget(struct tty_struct *tty); 132 static int oti6858_tiocmset(struct tty_struct *tty, 133 unsigned int set, unsigned int clear); 134 static int oti6858_port_probe(struct usb_serial_port *port); 135 static int oti6858_port_remove(struct usb_serial_port *port); 136 137 /* device info */ 138 static struct usb_serial_driver oti6858_device = { 139 .driver = { 140 .owner = THIS_MODULE, 141 .name = "oti6858", 142 }, 143 .id_table = id_table, 144 .num_ports = 1, 145 .num_bulk_in = 1, 146 .num_bulk_out = 1, 147 .num_interrupt_in = 1, 148 .open = oti6858_open, 149 .close = oti6858_close, 150 .write = oti6858_write, 151 .set_termios = oti6858_set_termios, 152 .init_termios = oti6858_init_termios, 153 .tiocmget = oti6858_tiocmget, 154 .tiocmset = oti6858_tiocmset, 155 .tiocmiwait = usb_serial_generic_tiocmiwait, 156 .read_bulk_callback = oti6858_read_bulk_callback, 157 .read_int_callback = oti6858_read_int_callback, 158 .write_bulk_callback = oti6858_write_bulk_callback, 159 .write_room = oti6858_write_room, 160 .chars_in_buffer = oti6858_chars_in_buffer, 161 .port_probe = oti6858_port_probe, 162 .port_remove = oti6858_port_remove, 163 }; 164 165 static struct usb_serial_driver * const serial_drivers[] = { 166 &oti6858_device, NULL 167 }; 168 169 struct oti6858_private { 170 spinlock_t lock; 171 172 struct oti6858_control_pkt status; 173 174 struct { 175 u8 read_urb_in_use; 176 u8 write_urb_in_use; 177 } flags; 178 struct delayed_work delayed_write_work; 179 180 struct { 181 __le16 divisor; 182 u8 frame_fmt; 183 u8 control; 184 } pending_setup; 185 u8 transient; 186 u8 setup_done; 187 struct delayed_work delayed_setup_work; 188 189 struct usb_serial_port *port; /* USB port with which associated */ 190 }; 191 192 static void setup_line(struct work_struct *work) 193 { 194 struct oti6858_private *priv = container_of(work, 195 struct oti6858_private, delayed_setup_work.work); 196 struct usb_serial_port *port = priv->port; 197 struct oti6858_control_pkt *new_setup; 198 unsigned long flags; 199 int result; 200 201 new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL); 202 if (!new_setup) { 203 /* we will try again */ 204 schedule_delayed_work(&priv->delayed_setup_work, 205 msecs_to_jiffies(2)); 206 return; 207 } 208 209 result = usb_control_msg(port->serial->dev, 210 usb_rcvctrlpipe(port->serial->dev, 0), 211 OTI6858_REQ_T_GET_STATUS, 212 OTI6858_REQ_GET_STATUS, 213 0, 0, 214 new_setup, OTI6858_CTRL_PKT_SIZE, 215 100); 216 217 if (result != OTI6858_CTRL_PKT_SIZE) { 218 dev_err(&port->dev, "%s(): error reading status\n", __func__); 219 kfree(new_setup); 220 /* we will try again */ 221 schedule_delayed_work(&priv->delayed_setup_work, 222 msecs_to_jiffies(2)); 223 return; 224 } 225 226 spin_lock_irqsave(&priv->lock, flags); 227 if (!OTI6858_CTRL_EQUALS_PENDING(new_setup, priv)) { 228 new_setup->divisor = priv->pending_setup.divisor; 229 new_setup->control = priv->pending_setup.control; 230 new_setup->frame_fmt = priv->pending_setup.frame_fmt; 231 232 spin_unlock_irqrestore(&priv->lock, flags); 233 result = usb_control_msg(port->serial->dev, 234 usb_sndctrlpipe(port->serial->dev, 0), 235 OTI6858_REQ_T_SET_LINE, 236 OTI6858_REQ_SET_LINE, 237 0, 0, 238 new_setup, OTI6858_CTRL_PKT_SIZE, 239 100); 240 } else { 241 spin_unlock_irqrestore(&priv->lock, flags); 242 result = 0; 243 } 244 kfree(new_setup); 245 246 spin_lock_irqsave(&priv->lock, flags); 247 if (result != OTI6858_CTRL_PKT_SIZE) 248 priv->transient = 0; 249 priv->setup_done = 1; 250 spin_unlock_irqrestore(&priv->lock, flags); 251 252 dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); 253 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); 254 if (result != 0) { 255 dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n", 256 __func__, result); 257 } 258 } 259 260 static void send_data(struct work_struct *work) 261 { 262 struct oti6858_private *priv = container_of(work, 263 struct oti6858_private, delayed_write_work.work); 264 struct usb_serial_port *port = priv->port; 265 int count = 0, result; 266 unsigned long flags; 267 u8 *allow; 268 269 spin_lock_irqsave(&priv->lock, flags); 270 if (priv->flags.write_urb_in_use) { 271 spin_unlock_irqrestore(&priv->lock, flags); 272 schedule_delayed_work(&priv->delayed_write_work, 273 msecs_to_jiffies(2)); 274 return; 275 } 276 priv->flags.write_urb_in_use = 1; 277 spin_unlock_irqrestore(&priv->lock, flags); 278 279 spin_lock_irqsave(&port->lock, flags); 280 count = kfifo_len(&port->write_fifo); 281 spin_unlock_irqrestore(&port->lock, flags); 282 283 if (count > port->bulk_out_size) 284 count = port->bulk_out_size; 285 286 if (count != 0) { 287 allow = kmalloc(1, GFP_KERNEL); 288 if (!allow) 289 return; 290 291 result = usb_control_msg(port->serial->dev, 292 usb_rcvctrlpipe(port->serial->dev, 0), 293 OTI6858_REQ_T_CHECK_TXBUFF, 294 OTI6858_REQ_CHECK_TXBUFF, 295 count, 0, allow, 1, 100); 296 if (result != 1 || *allow != 0) 297 count = 0; 298 kfree(allow); 299 } 300 301 if (count == 0) { 302 priv->flags.write_urb_in_use = 0; 303 304 dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); 305 result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); 306 if (result != 0) { 307 dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n", 308 __func__, result); 309 } 310 return; 311 } 312 313 count = kfifo_out_locked(&port->write_fifo, 314 port->write_urb->transfer_buffer, 315 count, &port->lock); 316 port->write_urb->transfer_buffer_length = count; 317 result = usb_submit_urb(port->write_urb, GFP_NOIO); 318 if (result != 0) { 319 dev_err_console(port, "%s(): usb_submit_urb() failed with error %d\n", 320 __func__, result); 321 priv->flags.write_urb_in_use = 0; 322 } 323 324 usb_serial_port_softint(port); 325 } 326 327 static int oti6858_port_probe(struct usb_serial_port *port) 328 { 329 struct oti6858_private *priv; 330 331 priv = kzalloc(sizeof(*priv), GFP_KERNEL); 332 if (!priv) 333 return -ENOMEM; 334 335 spin_lock_init(&priv->lock); 336 priv->port = port; 337 INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line); 338 INIT_DELAYED_WORK(&priv->delayed_write_work, send_data); 339 340 usb_set_serial_port_data(port, priv); 341 342 port->port.drain_delay = 256; /* FIXME: check the FIFO length */ 343 344 return 0; 345 } 346 347 static int oti6858_port_remove(struct usb_serial_port *port) 348 { 349 struct oti6858_private *priv; 350 351 priv = usb_get_serial_port_data(port); 352 kfree(priv); 353 354 return 0; 355 } 356 357 static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port, 358 const unsigned char *buf, int count) 359 { 360 if (!count) 361 return count; 362 363 count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock); 364 365 return count; 366 } 367 368 static int oti6858_write_room(struct tty_struct *tty) 369 { 370 struct usb_serial_port *port = tty->driver_data; 371 int room = 0; 372 unsigned long flags; 373 374 spin_lock_irqsave(&port->lock, flags); 375 room = kfifo_avail(&port->write_fifo); 376 spin_unlock_irqrestore(&port->lock, flags); 377 378 return room; 379 } 380 381 static int oti6858_chars_in_buffer(struct tty_struct *tty) 382 { 383 struct usb_serial_port *port = tty->driver_data; 384 int chars = 0; 385 unsigned long flags; 386 387 spin_lock_irqsave(&port->lock, flags); 388 chars = kfifo_len(&port->write_fifo); 389 spin_unlock_irqrestore(&port->lock, flags); 390 391 return chars; 392 } 393 394 static void oti6858_init_termios(struct tty_struct *tty) 395 { 396 tty_encode_baud_rate(tty, 38400, 38400); 397 } 398 399 static void oti6858_set_termios(struct tty_struct *tty, 400 struct usb_serial_port *port, struct ktermios *old_termios) 401 { 402 struct oti6858_private *priv = usb_get_serial_port_data(port); 403 unsigned long flags; 404 unsigned int cflag; 405 u8 frame_fmt, control; 406 __le16 divisor; 407 int br; 408 409 cflag = tty->termios.c_cflag; 410 411 spin_lock_irqsave(&priv->lock, flags); 412 divisor = priv->pending_setup.divisor; 413 frame_fmt = priv->pending_setup.frame_fmt; 414 control = priv->pending_setup.control; 415 spin_unlock_irqrestore(&priv->lock, flags); 416 417 frame_fmt &= ~FMT_DATA_BITS_MASK; 418 switch (cflag & CSIZE) { 419 case CS5: 420 frame_fmt |= FMT_DATA_BITS_5; 421 break; 422 case CS6: 423 frame_fmt |= FMT_DATA_BITS_6; 424 break; 425 case CS7: 426 frame_fmt |= FMT_DATA_BITS_7; 427 break; 428 default: 429 case CS8: 430 frame_fmt |= FMT_DATA_BITS_8; 431 break; 432 } 433 434 /* manufacturer claims that this device can work with baud rates 435 * up to 3 Mbps; I've tested it only on 115200 bps, so I can't 436 * guarantee that any other baud rate will work (especially 437 * the higher ones) 438 */ 439 br = tty_get_baud_rate(tty); 440 if (br == 0) { 441 divisor = 0; 442 } else { 443 int real_br; 444 int new_divisor; 445 br = min(br, OTI6858_MAX_BAUD_RATE); 446 447 new_divisor = (96000000 + 8 * br) / (16 * br); 448 real_br = 96000000 / (16 * new_divisor); 449 divisor = cpu_to_le16(new_divisor); 450 tty_encode_baud_rate(tty, real_br, real_br); 451 } 452 453 frame_fmt &= ~FMT_STOP_BITS_MASK; 454 if ((cflag & CSTOPB) != 0) 455 frame_fmt |= FMT_STOP_BITS_2; 456 else 457 frame_fmt |= FMT_STOP_BITS_1; 458 459 frame_fmt &= ~FMT_PARITY_MASK; 460 if ((cflag & PARENB) != 0) { 461 if ((cflag & PARODD) != 0) 462 frame_fmt |= FMT_PARITY_ODD; 463 else 464 frame_fmt |= FMT_PARITY_EVEN; 465 } else { 466 frame_fmt |= FMT_PARITY_NONE; 467 } 468 469 control &= ~CONTROL_MASK; 470 if ((cflag & CRTSCTS) != 0) 471 control |= (CONTROL_DTR_HIGH | CONTROL_RTS_HIGH); 472 473 /* change control lines if we are switching to or from B0 */ 474 /* FIXME: 475 spin_lock_irqsave(&priv->lock, flags); 476 control = priv->line_control; 477 if ((cflag & CBAUD) == B0) 478 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); 479 else 480 priv->line_control |= (CONTROL_DTR | CONTROL_RTS); 481 if (control != priv->line_control) { 482 control = priv->line_control; 483 spin_unlock_irqrestore(&priv->lock, flags); 484 set_control_lines(serial->dev, control); 485 } else { 486 spin_unlock_irqrestore(&priv->lock, flags); 487 } 488 */ 489 490 spin_lock_irqsave(&priv->lock, flags); 491 if (divisor != priv->pending_setup.divisor 492 || control != priv->pending_setup.control 493 || frame_fmt != priv->pending_setup.frame_fmt) { 494 priv->pending_setup.divisor = divisor; 495 priv->pending_setup.control = control; 496 priv->pending_setup.frame_fmt = frame_fmt; 497 } 498 spin_unlock_irqrestore(&priv->lock, flags); 499 } 500 501 static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port) 502 { 503 struct oti6858_private *priv = usb_get_serial_port_data(port); 504 struct usb_serial *serial = port->serial; 505 struct oti6858_control_pkt *buf; 506 unsigned long flags; 507 int result; 508 509 usb_clear_halt(serial->dev, port->write_urb->pipe); 510 usb_clear_halt(serial->dev, port->read_urb->pipe); 511 512 buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL); 513 if (!buf) 514 return -ENOMEM; 515 516 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 517 OTI6858_REQ_T_GET_STATUS, 518 OTI6858_REQ_GET_STATUS, 519 0, 0, 520 buf, OTI6858_CTRL_PKT_SIZE, 521 100); 522 if (result != OTI6858_CTRL_PKT_SIZE) { 523 /* assume default (after power-on reset) values */ 524 buf->divisor = cpu_to_le16(0x009c); /* 38400 bps */ 525 buf->frame_fmt = 0x03; /* 8N1 */ 526 buf->something = 0x43; 527 buf->control = 0x4c; /* DTR, RTS */ 528 buf->tx_status = 0x00; 529 buf->pin_state = 0x5b; /* RTS, CTS, DSR, DTR, RI, DCD */ 530 buf->rx_bytes_avail = 0x00; 531 } 532 533 spin_lock_irqsave(&priv->lock, flags); 534 memcpy(&priv->status, buf, OTI6858_CTRL_PKT_SIZE); 535 priv->pending_setup.divisor = buf->divisor; 536 priv->pending_setup.frame_fmt = buf->frame_fmt; 537 priv->pending_setup.control = buf->control; 538 spin_unlock_irqrestore(&priv->lock, flags); 539 kfree(buf); 540 541 dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); 542 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); 543 if (result != 0) { 544 dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n", 545 __func__, result); 546 oti6858_close(port); 547 return result; 548 } 549 550 /* setup termios */ 551 if (tty) 552 oti6858_set_termios(tty, port, NULL); 553 554 return 0; 555 } 556 557 static void oti6858_close(struct usb_serial_port *port) 558 { 559 struct oti6858_private *priv = usb_get_serial_port_data(port); 560 unsigned long flags; 561 562 spin_lock_irqsave(&port->lock, flags); 563 /* clear out any remaining data in the buffer */ 564 kfifo_reset_out(&port->write_fifo); 565 spin_unlock_irqrestore(&port->lock, flags); 566 567 dev_dbg(&port->dev, "%s(): after buf_clear()\n", __func__); 568 569 /* cancel scheduled setup */ 570 cancel_delayed_work_sync(&priv->delayed_setup_work); 571 cancel_delayed_work_sync(&priv->delayed_write_work); 572 573 /* shutdown our urbs */ 574 dev_dbg(&port->dev, "%s(): shutting down urbs\n", __func__); 575 usb_kill_urb(port->write_urb); 576 usb_kill_urb(port->read_urb); 577 usb_kill_urb(port->interrupt_in_urb); 578 } 579 580 static int oti6858_tiocmset(struct tty_struct *tty, 581 unsigned int set, unsigned int clear) 582 { 583 struct usb_serial_port *port = tty->driver_data; 584 struct oti6858_private *priv = usb_get_serial_port_data(port); 585 unsigned long flags; 586 u8 control; 587 588 dev_dbg(&port->dev, "%s(set = 0x%08x, clear = 0x%08x)\n", 589 __func__, set, clear); 590 591 /* FIXME: check if this is correct (active high/low) */ 592 spin_lock_irqsave(&priv->lock, flags); 593 control = priv->pending_setup.control; 594 if ((set & TIOCM_RTS) != 0) 595 control |= CONTROL_RTS_HIGH; 596 if ((set & TIOCM_DTR) != 0) 597 control |= CONTROL_DTR_HIGH; 598 if ((clear & TIOCM_RTS) != 0) 599 control &= ~CONTROL_RTS_HIGH; 600 if ((clear & TIOCM_DTR) != 0) 601 control &= ~CONTROL_DTR_HIGH; 602 603 if (control != priv->pending_setup.control) 604 priv->pending_setup.control = control; 605 606 spin_unlock_irqrestore(&priv->lock, flags); 607 return 0; 608 } 609 610 static int oti6858_tiocmget(struct tty_struct *tty) 611 { 612 struct usb_serial_port *port = tty->driver_data; 613 struct oti6858_private *priv = usb_get_serial_port_data(port); 614 unsigned long flags; 615 unsigned pin_state; 616 unsigned result = 0; 617 618 spin_lock_irqsave(&priv->lock, flags); 619 pin_state = priv->status.pin_state & PIN_MASK; 620 spin_unlock_irqrestore(&priv->lock, flags); 621 622 /* FIXME: check if this is correct (active high/low) */ 623 if ((pin_state & PIN_RTS) != 0) 624 result |= TIOCM_RTS; 625 if ((pin_state & PIN_CTS) != 0) 626 result |= TIOCM_CTS; 627 if ((pin_state & PIN_DSR) != 0) 628 result |= TIOCM_DSR; 629 if ((pin_state & PIN_DTR) != 0) 630 result |= TIOCM_DTR; 631 if ((pin_state & PIN_RI) != 0) 632 result |= TIOCM_RI; 633 if ((pin_state & PIN_DCD) != 0) 634 result |= TIOCM_CD; 635 636 dev_dbg(&port->dev, "%s() = 0x%08x\n", __func__, result); 637 638 return result; 639 } 640 641 static void oti6858_read_int_callback(struct urb *urb) 642 { 643 struct usb_serial_port *port = urb->context; 644 struct oti6858_private *priv = usb_get_serial_port_data(port); 645 int transient = 0, can_recv = 0, resubmit = 1; 646 int status = urb->status; 647 648 switch (status) { 649 case 0: 650 /* success */ 651 break; 652 case -ECONNRESET: 653 case -ENOENT: 654 case -ESHUTDOWN: 655 /* this urb is terminated, clean up */ 656 dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n", 657 __func__, status); 658 return; 659 default: 660 dev_dbg(&urb->dev->dev, "%s(): nonzero urb status received: %d\n", 661 __func__, status); 662 break; 663 } 664 665 if (status == 0 && urb->actual_length == OTI6858_CTRL_PKT_SIZE) { 666 struct oti6858_control_pkt *xs = urb->transfer_buffer; 667 unsigned long flags; 668 669 spin_lock_irqsave(&priv->lock, flags); 670 671 if (!priv->transient) { 672 if (!OTI6858_CTRL_EQUALS_PENDING(xs, priv)) { 673 if (xs->rx_bytes_avail == 0) { 674 priv->transient = 4; 675 priv->setup_done = 0; 676 resubmit = 0; 677 dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__); 678 schedule_delayed_work(&priv->delayed_setup_work, 0); 679 } 680 } 681 } else { 682 if (OTI6858_CTRL_EQUALS_PENDING(xs, priv)) { 683 priv->transient = 0; 684 } else if (!priv->setup_done) { 685 resubmit = 0; 686 } else if (--priv->transient == 0) { 687 if (xs->rx_bytes_avail == 0) { 688 priv->transient = 4; 689 priv->setup_done = 0; 690 resubmit = 0; 691 dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__); 692 schedule_delayed_work(&priv->delayed_setup_work, 0); 693 } 694 } 695 } 696 697 if (!priv->transient) { 698 u8 delta = xs->pin_state ^ priv->status.pin_state; 699 700 if (delta & PIN_MSR_MASK) { 701 if (delta & PIN_CTS) 702 port->icount.cts++; 703 if (delta & PIN_DSR) 704 port->icount.dsr++; 705 if (delta & PIN_RI) 706 port->icount.rng++; 707 if (delta & PIN_DCD) 708 port->icount.dcd++; 709 710 wake_up_interruptible(&port->port.delta_msr_wait); 711 } 712 713 memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE); 714 } 715 716 if (!priv->transient && xs->rx_bytes_avail != 0) { 717 can_recv = xs->rx_bytes_avail; 718 priv->flags.read_urb_in_use = 1; 719 } 720 721 transient = priv->transient; 722 spin_unlock_irqrestore(&priv->lock, flags); 723 } 724 725 if (can_recv) { 726 int result; 727 728 result = usb_submit_urb(port->read_urb, GFP_ATOMIC); 729 if (result != 0) { 730 priv->flags.read_urb_in_use = 0; 731 dev_err(&port->dev, "%s(): usb_submit_urb() failed," 732 " error %d\n", __func__, result); 733 } else { 734 resubmit = 0; 735 } 736 } else if (!transient) { 737 unsigned long flags; 738 int count; 739 740 spin_lock_irqsave(&port->lock, flags); 741 count = kfifo_len(&port->write_fifo); 742 spin_unlock_irqrestore(&port->lock, flags); 743 744 spin_lock_irqsave(&priv->lock, flags); 745 if (priv->flags.write_urb_in_use == 0 && count != 0) { 746 schedule_delayed_work(&priv->delayed_write_work, 0); 747 resubmit = 0; 748 } 749 spin_unlock_irqrestore(&priv->lock, flags); 750 } 751 752 if (resubmit) { 753 int result; 754 755 /* dev_dbg(&urb->dev->dev, "%s(): submitting interrupt urb\n", __func__); */ 756 result = usb_submit_urb(urb, GFP_ATOMIC); 757 if (result != 0) { 758 dev_err(&urb->dev->dev, 759 "%s(): usb_submit_urb() failed with" 760 " error %d\n", __func__, result); 761 } 762 } 763 } 764 765 static void oti6858_read_bulk_callback(struct urb *urb) 766 { 767 struct usb_serial_port *port = urb->context; 768 struct oti6858_private *priv = usb_get_serial_port_data(port); 769 unsigned char *data = urb->transfer_buffer; 770 unsigned long flags; 771 int status = urb->status; 772 int result; 773 774 spin_lock_irqsave(&priv->lock, flags); 775 priv->flags.read_urb_in_use = 0; 776 spin_unlock_irqrestore(&priv->lock, flags); 777 778 if (status != 0) { 779 dev_dbg(&urb->dev->dev, "%s(): unable to handle the error, exiting\n", __func__); 780 return; 781 } 782 783 if (urb->actual_length > 0) { 784 tty_insert_flip_string(&port->port, data, urb->actual_length); 785 tty_flip_buffer_push(&port->port); 786 } 787 788 /* schedule the interrupt urb */ 789 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); 790 if (result != 0 && result != -EPERM) { 791 dev_err(&port->dev, "%s(): usb_submit_urb() failed," 792 " error %d\n", __func__, result); 793 } 794 } 795 796 static void oti6858_write_bulk_callback(struct urb *urb) 797 { 798 struct usb_serial_port *port = urb->context; 799 struct oti6858_private *priv = usb_get_serial_port_data(port); 800 int status = urb->status; 801 int result; 802 803 switch (status) { 804 case 0: 805 /* success */ 806 break; 807 case -ECONNRESET: 808 case -ENOENT: 809 case -ESHUTDOWN: 810 /* this urb is terminated, clean up */ 811 dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n", __func__, status); 812 priv->flags.write_urb_in_use = 0; 813 return; 814 default: 815 /* error in the urb, so we have to resubmit it */ 816 dev_dbg(&urb->dev->dev, "%s(): nonzero write bulk status received: %d\n", __func__, status); 817 dev_dbg(&urb->dev->dev, "%s(): overflow in write\n", __func__); 818 819 port->write_urb->transfer_buffer_length = 1; 820 result = usb_submit_urb(port->write_urb, GFP_ATOMIC); 821 if (result) { 822 dev_err_console(port, "%s(): usb_submit_urb() failed," 823 " error %d\n", __func__, result); 824 } else { 825 return; 826 } 827 } 828 829 priv->flags.write_urb_in_use = 0; 830 831 /* schedule the interrupt urb if we are still open */ 832 dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); 833 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); 834 if (result != 0) { 835 dev_err(&port->dev, "%s(): failed submitting int urb," 836 " error %d\n", __func__, result); 837 } 838 } 839 840 module_usb_serial_driver(serial_drivers, id_table); 841 842 MODULE_DESCRIPTION(OTI6858_DESCRIPTION); 843 MODULE_AUTHOR(OTI6858_AUTHOR); 844 MODULE_LICENSE("GPL v2"); 845