1 #define SUSBCRequest_SetBaudRateParityAndStopBits 1 2 #define SUSBCR_SBR_MASK 0xFF00 3 #define SUSBCR_SBR_1200 0x0100 4 #define SUSBCR_SBR_9600 0x0200 5 #define SUSBCR_SBR_19200 0x0400 6 #define SUSBCR_SBR_28800 0x0800 7 #define SUSBCR_SBR_38400 0x1000 8 #define SUSBCR_SBR_57600 0x2000 9 #define SUSBCR_SBR_115200 0x4000 10 11 #define SUSBCR_SPASB_MASK 0x0070 12 #define SUSBCR_SPASB_NoParity 0x0010 13 #define SUSBCR_SPASB_OddParity 0x0020 14 #define SUSBCR_SPASB_EvenParity 0x0040 15 16 #define SUSBCR_SPASB_STPMASK 0x0003 17 #define SUSBCR_SPASB_1StopBit 0x0001 18 #define SUSBCR_SPASB_2StopBits 0x0002 19 20 #define SUSBCRequest_SetStatusLinesOrQueues 2 21 #define SUSBCR_SSL_SETRTS 0x0001 22 #define SUSBCR_SSL_CLRRTS 0x0002 23 #define SUSBCR_SSL_SETDTR 0x0004 24 #define SUSBCR_SSL_CLRDTR 0x0010 25 26 /* Kill the pending/current writes to the comm port. */ 27 #define SUSBCR_SSL_PURGE_TXABORT 0x0100 28 /* Kill the pending/current reads to the comm port. */ 29 #define SUSBCR_SSL_PURGE_RXABORT 0x0200 30 /* Kill the transmit queue if there. */ 31 #define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 32 /* Kill the typeahead buffer if there. */ 33 #define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 34 35 #define SUSBCRequest_GetStatusLineState 4 36 /* Any Character received */ 37 #define SUSBCR_GSL_RXCHAR 0x0001 38 /* Transmitt Queue Empty */ 39 #define SUSBCR_GSL_TXEMPTY 0x0004 40 /* CTS changed state */ 41 #define SUSBCR_GSL_CTS 0x0008 42 /* DSR changed state */ 43 #define SUSBCR_GSL_DSR 0x0010 44 /* RLSD changed state */ 45 #define SUSBCR_GSL_RLSD 0x0020 46 /* BREAK received */ 47 #define SUSBCR_GSL_BREAK 0x0040 48 /* Line status error occurred */ 49 #define SUSBCR_GSL_ERR 0x0080 50 /* Ring signal detected */ 51 #define SUSBCR_GSL_RING 0x0100 52 53 #define SUSBCRequest_Misc 8 54 /* use a predefined reset sequence */ 55 #define SUSBCR_MSC_ResetReader 0x0001 56 /* use a predefined sequence to reset the internal queues */ 57 #define SUSBCR_MSC_ResetAllQueues 0x0002 58 59 #define SUSBCRequest_GetMisc 0x10 60 61 /* 62 * get the firmware version from device, coded like this 0xHHLLBBPP with 63 * HH = Firmware Version High Byte 64 * LL = Firmware Version Low Byte 65 * BB = Build Number 66 * PP = Further Attributes 67 */ 68 #define SUSBCR_MSC_GetFWVersion 0x0001 69 70 /* 71 * get the hardware version from device coded like this 0xHHLLPPRR with 72 * HH = Software Version High Byte 73 * LL = Software Version Low Byte 74 * PP = Further Attributes 75 * RR = Reserved for the hardware ID 76 */ 77 #define SUSBCR_MSC_GetHWVersion 0x0002 78