1 #define SUSBCRequest_SetBaudRateParityAndStopBits 1 2 #define SUSBCR_SBR_MASK 0xFF00 3 #define SUSBCR_SBR_1200 0x0100 4 #define SUSBCR_SBR_9600 0x0200 5 #define SUSBCR_SBR_19200 0x0400 6 #define SUSBCR_SBR_28800 0x0800 7 #define SUSBCR_SBR_38400 0x1000 8 #define SUSBCR_SBR_57600 0x2000 9 #define SUSBCR_SBR_115200 0x4000 10 11 #define SUSBCR_SPASB_MASK 0x0070 12 #define SUSBCR_SPASB_NoParity 0x0010 13 #define SUSBCR_SPASB_OddParity 0x0020 14 #define SUSBCR_SPASB_EvenParity 0x0040 15 16 #define SUSBCR_SPASB_STPMASK 0x0003 17 #define SUSBCR_SPASB_1StopBit 0x0001 18 #define SUSBCR_SPASB_2StopBits 0x0002 19 20 #define SUSBCRequest_SetStatusLinesOrQueues 2 21 #define SUSBCR_SSL_SETRTS 0x0001 22 #define SUSBCR_SSL_CLRRTS 0x0002 23 #define SUSBCR_SSL_SETDTR 0x0004 24 #define SUSBCR_SSL_CLRDTR 0x0010 25 26 #define SUSBCR_SSL_PURGE_TXABORT 0x0100 // Kill the pending/current writes to the comm port. 27 #define SUSBCR_SSL_PURGE_RXABORT 0x0200 // Kill the pending/current reads to the comm port. 28 #define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 // Kill the transmit queue if there. 29 #define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 // Kill the typeahead buffer if there. 30 31 #define SUSBCRequest_GetStatusLineState 4 32 #define SUSBCR_GSL_RXCHAR 0x0001 // Any Character received 33 #define SUSBCR_GSL_TXEMPTY 0x0004 // Transmitt Queue Empty 34 #define SUSBCR_GSL_CTS 0x0008 // CTS changed state 35 #define SUSBCR_GSL_DSR 0x0010 // DSR changed state 36 #define SUSBCR_GSL_RLSD 0x0020 // RLSD changed state 37 #define SUSBCR_GSL_BREAK 0x0040 // BREAK received 38 #define SUSBCR_GSL_ERR 0x0080 // Line status error occurred 39 #define SUSBCR_GSL_RING 0x0100 // Ring signal detected 40 41 #define SUSBCRequest_Misc 8 42 #define SUSBCR_MSC_ResetReader 0x0001 // use a predefined reset sequence 43 #define SUSBCR_MSC_ResetAllQueues 0x0002 // use a predefined sequence to reset the internal queues 44 45 #define SUSBCRequest_GetMisc 0x10 46 #define SUSBCR_MSC_GetFWVersion 0x0001 /* get the firmware version from device, 47 coded like this 0xHHLLBBPP 48 with HH = Firmware Version High Byte 49 LL = Firmware Version Low Byte 50 BB = Build Number 51 PP = Further Attributes 52 */ 53 54 #define SUSBCR_MSC_GetHWVersion 0x0002 /* get the hardware version from device 55 coded like this 0xHHLLPPRR 56 with HH = Software Version High Byte 57 LL = Software Version Low Byte 58 PP = Further Attributes 59 RR = Reserved for the hardware ID 60 */ 61