1 /* 2 * KLSI KL5KUSB105 chip RS232 converter driver 3 * 4 * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com> 5 * Copyright (C) 2001 Utz-Uwe Haus <haus@uuhaus.de> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * All information about the device was acquired using SniffUSB ans snoopUSB 13 * on Windows98. 14 * It was written out of frustration with the PalmConnect USB Serial adapter 15 * sold by Palm Inc. 16 * Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided 17 * information that was not already available. 18 * 19 * It seems that KLSI bought some silicon-design information from ScanLogic, 20 * whose SL11R processor is at the core of the KL5KUSB chipset from KLSI. 21 * KLSI has firmware available for their devices; it is probable that the 22 * firmware differs from that used by KLSI in their products. If you have an 23 * original KLSI device and can provide some information on it, I would be 24 * most interested in adding support for it here. If you have any information 25 * on the protocol used (or find errors in my reverse-engineered stuff), please 26 * let me know. 27 * 28 * The code was only tested with a PalmConnect USB adapter; if you 29 * are adventurous, try it with any KLSI-based device and let me know how it 30 * breaks so that I can fix it! 31 */ 32 33 /* TODO: 34 * check modem line signals 35 * implement handshaking or decide that we do not support it 36 */ 37 38 #include <linux/kernel.h> 39 #include <linux/errno.h> 40 #include <linux/slab.h> 41 #include <linux/tty.h> 42 #include <linux/tty_driver.h> 43 #include <linux/tty_flip.h> 44 #include <linux/module.h> 45 #include <linux/uaccess.h> 46 #include <asm/unaligned.h> 47 #include <linux/usb.h> 48 #include <linux/usb/serial.h> 49 #include "kl5kusb105.h" 50 51 #define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>, Johan Hovold <jhovold@gmail.com>" 52 #define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver" 53 54 55 /* 56 * Function prototypes 57 */ 58 static int klsi_105_port_probe(struct usb_serial_port *port); 59 static int klsi_105_port_remove(struct usb_serial_port *port); 60 static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port); 61 static void klsi_105_close(struct usb_serial_port *port); 62 static void klsi_105_set_termios(struct tty_struct *tty, 63 struct usb_serial_port *port, struct ktermios *old); 64 static int klsi_105_tiocmget(struct tty_struct *tty); 65 static void klsi_105_process_read_urb(struct urb *urb); 66 static int klsi_105_prepare_write_buffer(struct usb_serial_port *port, 67 void *dest, size_t size); 68 69 /* 70 * All of the device info needed for the KLSI converters. 71 */ 72 static const struct usb_device_id id_table[] = { 73 { USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) }, 74 { USB_DEVICE(KLSI_VID, KLSI_KL5KUSB105D_PID) }, 75 { } /* Terminating entry */ 76 }; 77 78 MODULE_DEVICE_TABLE(usb, id_table); 79 80 static struct usb_serial_driver kl5kusb105d_device = { 81 .driver = { 82 .owner = THIS_MODULE, 83 .name = "kl5kusb105d", 84 }, 85 .description = "KL5KUSB105D / PalmConnect", 86 .id_table = id_table, 87 .num_ports = 1, 88 .bulk_out_size = 64, 89 .open = klsi_105_open, 90 .close = klsi_105_close, 91 .set_termios = klsi_105_set_termios, 92 /*.break_ctl = klsi_105_break_ctl,*/ 93 .tiocmget = klsi_105_tiocmget, 94 .port_probe = klsi_105_port_probe, 95 .port_remove = klsi_105_port_remove, 96 .throttle = usb_serial_generic_throttle, 97 .unthrottle = usb_serial_generic_unthrottle, 98 .process_read_urb = klsi_105_process_read_urb, 99 .prepare_write_buffer = klsi_105_prepare_write_buffer, 100 }; 101 102 static struct usb_serial_driver * const serial_drivers[] = { 103 &kl5kusb105d_device, NULL 104 }; 105 106 struct klsi_105_port_settings { 107 __u8 pktlen; /* always 5, it seems */ 108 __u8 baudrate; 109 __u8 databits; 110 __u8 unknown1; 111 __u8 unknown2; 112 } __attribute__ ((packed)); 113 114 struct klsi_105_private { 115 struct klsi_105_port_settings cfg; 116 struct ktermios termios; 117 unsigned long line_state; /* modem line settings */ 118 spinlock_t lock; 119 }; 120 121 122 /* 123 * Handle vendor specific USB requests 124 */ 125 126 127 #define KLSI_TIMEOUT 5000 /* default urb timeout */ 128 129 static int klsi_105_chg_port_settings(struct usb_serial_port *port, 130 struct klsi_105_port_settings *settings) 131 { 132 int rc; 133 134 rc = usb_control_msg(port->serial->dev, 135 usb_sndctrlpipe(port->serial->dev, 0), 136 KL5KUSB105A_SIO_SET_DATA, 137 USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE, 138 0, /* value */ 139 0, /* index */ 140 settings, 141 sizeof(struct klsi_105_port_settings), 142 KLSI_TIMEOUT); 143 if (rc < 0) 144 dev_err(&port->dev, 145 "Change port settings failed (error = %d)\n", rc); 146 dev_info(&port->serial->dev->dev, 147 "%d byte block, baudrate %x, databits %d, u1 %d, u2 %d\n", 148 settings->pktlen, settings->baudrate, settings->databits, 149 settings->unknown1, settings->unknown2); 150 return rc; 151 } 152 153 /* translate a 16-bit status value from the device to linux's TIO bits */ 154 static unsigned long klsi_105_status2linestate(const __u16 status) 155 { 156 unsigned long res = 0; 157 158 res = ((status & KL5KUSB105A_DSR) ? TIOCM_DSR : 0) 159 | ((status & KL5KUSB105A_CTS) ? TIOCM_CTS : 0) 160 ; 161 162 return res; 163 } 164 165 /* 166 * Read line control via vendor command and return result through 167 * *line_state_p 168 */ 169 /* It seems that the status buffer has always only 2 bytes length */ 170 #define KLSI_STATUSBUF_LEN 2 171 static int klsi_105_get_line_state(struct usb_serial_port *port, 172 unsigned long *line_state_p) 173 { 174 int rc; 175 u8 *status_buf; 176 __u16 status; 177 178 dev_info(&port->serial->dev->dev, "sending SIO Poll request\n"); 179 180 status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL); 181 if (!status_buf) 182 return -ENOMEM; 183 184 status_buf[0] = 0xff; 185 status_buf[1] = 0xff; 186 rc = usb_control_msg(port->serial->dev, 187 usb_rcvctrlpipe(port->serial->dev, 0), 188 KL5KUSB105A_SIO_POLL, 189 USB_TYPE_VENDOR | USB_DIR_IN, 190 0, /* value */ 191 0, /* index */ 192 status_buf, KLSI_STATUSBUF_LEN, 193 10000 194 ); 195 if (rc < 0) 196 dev_err(&port->dev, "Reading line status failed (error = %d)\n", 197 rc); 198 else { 199 status = get_unaligned_le16(status_buf); 200 201 dev_info(&port->serial->dev->dev, "read status %x %x\n", 202 status_buf[0], status_buf[1]); 203 204 *line_state_p = klsi_105_status2linestate(status); 205 } 206 207 kfree(status_buf); 208 return rc; 209 } 210 211 212 /* 213 * Driver's tty interface functions 214 */ 215 216 static int klsi_105_port_probe(struct usb_serial_port *port) 217 { 218 struct klsi_105_private *priv; 219 220 priv = kmalloc(sizeof(*priv), GFP_KERNEL); 221 if (!priv) 222 return -ENOMEM; 223 224 /* set initial values for control structures */ 225 priv->cfg.pktlen = 5; 226 priv->cfg.baudrate = kl5kusb105a_sio_b9600; 227 priv->cfg.databits = kl5kusb105a_dtb_8; 228 priv->cfg.unknown1 = 0; 229 priv->cfg.unknown2 = 1; 230 231 priv->line_state = 0; 232 233 spin_lock_init(&priv->lock); 234 235 /* priv->termios is left uninitialized until port opening */ 236 237 usb_set_serial_port_data(port, priv); 238 239 return 0; 240 } 241 242 static int klsi_105_port_remove(struct usb_serial_port *port) 243 { 244 struct klsi_105_private *priv; 245 246 priv = usb_get_serial_port_data(port); 247 kfree(priv); 248 249 return 0; 250 } 251 252 static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) 253 { 254 struct klsi_105_private *priv = usb_get_serial_port_data(port); 255 int retval = 0; 256 int rc; 257 int i; 258 unsigned long line_state; 259 struct klsi_105_port_settings *cfg; 260 unsigned long flags; 261 262 /* Do a defined restart: 263 * Set up sane default baud rate and send the 'READ_ON' 264 * vendor command. 265 * FIXME: set modem line control (how?) 266 * Then read the modem line control and store values in 267 * priv->line_state. 268 */ 269 cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); 270 if (!cfg) 271 return -ENOMEM; 272 273 cfg->pktlen = 5; 274 cfg->baudrate = kl5kusb105a_sio_b9600; 275 cfg->databits = kl5kusb105a_dtb_8; 276 cfg->unknown1 = 0; 277 cfg->unknown2 = 1; 278 klsi_105_chg_port_settings(port, cfg); 279 280 /* set up termios structure */ 281 spin_lock_irqsave(&priv->lock, flags); 282 priv->termios.c_iflag = tty->termios.c_iflag; 283 priv->termios.c_oflag = tty->termios.c_oflag; 284 priv->termios.c_cflag = tty->termios.c_cflag; 285 priv->termios.c_lflag = tty->termios.c_lflag; 286 for (i = 0; i < NCCS; i++) 287 priv->termios.c_cc[i] = tty->termios.c_cc[i]; 288 priv->cfg.pktlen = cfg->pktlen; 289 priv->cfg.baudrate = cfg->baudrate; 290 priv->cfg.databits = cfg->databits; 291 priv->cfg.unknown1 = cfg->unknown1; 292 priv->cfg.unknown2 = cfg->unknown2; 293 spin_unlock_irqrestore(&priv->lock, flags); 294 295 /* READ_ON and urb submission */ 296 rc = usb_serial_generic_open(tty, port); 297 if (rc) { 298 retval = rc; 299 goto exit; 300 } 301 302 rc = usb_control_msg(port->serial->dev, 303 usb_sndctrlpipe(port->serial->dev, 0), 304 KL5KUSB105A_SIO_CONFIGURE, 305 USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE, 306 KL5KUSB105A_SIO_CONFIGURE_READ_ON, 307 0, /* index */ 308 NULL, 309 0, 310 KLSI_TIMEOUT); 311 if (rc < 0) { 312 dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc); 313 retval = rc; 314 } else 315 dev_dbg(&port->dev, "%s - enabled reading\n", __func__); 316 317 rc = klsi_105_get_line_state(port, &line_state); 318 if (rc >= 0) { 319 spin_lock_irqsave(&priv->lock, flags); 320 priv->line_state = line_state; 321 spin_unlock_irqrestore(&priv->lock, flags); 322 dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state); 323 retval = 0; 324 } else 325 retval = rc; 326 327 exit: 328 kfree(cfg); 329 return retval; 330 } 331 332 static void klsi_105_close(struct usb_serial_port *port) 333 { 334 int rc; 335 336 /* send READ_OFF */ 337 rc = usb_control_msg(port->serial->dev, 338 usb_sndctrlpipe(port->serial->dev, 0), 339 KL5KUSB105A_SIO_CONFIGURE, 340 USB_TYPE_VENDOR | USB_DIR_OUT, 341 KL5KUSB105A_SIO_CONFIGURE_READ_OFF, 342 0, /* index */ 343 NULL, 0, 344 KLSI_TIMEOUT); 345 if (rc < 0) 346 dev_err(&port->dev, "failed to disable read: %d\n", rc); 347 348 /* shutdown our bulk reads and writes */ 349 usb_serial_generic_close(port); 350 } 351 352 /* We need to write a complete 64-byte data block and encode the 353 * number actually sent in the first double-byte, LSB-order. That 354 * leaves at most 62 bytes of payload. 355 */ 356 #define KLSI_HDR_LEN 2 357 static int klsi_105_prepare_write_buffer(struct usb_serial_port *port, 358 void *dest, size_t size) 359 { 360 unsigned char *buf = dest; 361 int count; 362 363 count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, 364 &port->lock); 365 put_unaligned_le16(count, buf); 366 367 return count + KLSI_HDR_LEN; 368 } 369 370 /* The data received is preceded by a length double-byte in LSB-first order. 371 */ 372 static void klsi_105_process_read_urb(struct urb *urb) 373 { 374 struct usb_serial_port *port = urb->context; 375 unsigned char *data = urb->transfer_buffer; 376 unsigned len; 377 378 /* empty urbs seem to happen, we ignore them */ 379 if (!urb->actual_length) 380 return; 381 382 if (urb->actual_length <= KLSI_HDR_LEN) { 383 dev_dbg(&port->dev, "%s - malformed packet\n", __func__); 384 return; 385 } 386 387 len = get_unaligned_le16(data); 388 if (len > urb->actual_length - KLSI_HDR_LEN) { 389 dev_dbg(&port->dev, "%s - packet length mismatch\n", __func__); 390 len = urb->actual_length - KLSI_HDR_LEN; 391 } 392 393 tty_insert_flip_string(&port->port, data + KLSI_HDR_LEN, len); 394 tty_flip_buffer_push(&port->port); 395 } 396 397 static void klsi_105_set_termios(struct tty_struct *tty, 398 struct usb_serial_port *port, 399 struct ktermios *old_termios) 400 { 401 struct klsi_105_private *priv = usb_get_serial_port_data(port); 402 struct device *dev = &port->dev; 403 unsigned int iflag = tty->termios.c_iflag; 404 unsigned int old_iflag = old_termios->c_iflag; 405 unsigned int cflag = tty->termios.c_cflag; 406 unsigned int old_cflag = old_termios->c_cflag; 407 struct klsi_105_port_settings *cfg; 408 unsigned long flags; 409 speed_t baud; 410 411 cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); 412 if (!cfg) 413 return; 414 415 /* lock while we are modifying the settings */ 416 spin_lock_irqsave(&priv->lock, flags); 417 418 /* 419 * Update baud rate 420 */ 421 baud = tty_get_baud_rate(tty); 422 423 if ((cflag & CBAUD) != (old_cflag & CBAUD)) { 424 /* reassert DTR and (maybe) RTS on transition from B0 */ 425 if ((old_cflag & CBAUD) == B0) { 426 dev_dbg(dev, "%s: baud was B0\n", __func__); 427 #if 0 428 priv->control_state |= TIOCM_DTR; 429 /* don't set RTS if using hardware flow control */ 430 if (!(old_cflag & CRTSCTS)) 431 priv->control_state |= TIOCM_RTS; 432 mct_u232_set_modem_ctrl(serial, priv->control_state); 433 #endif 434 } 435 } 436 switch (baud) { 437 case 0: /* handled below */ 438 break; 439 case 1200: 440 priv->cfg.baudrate = kl5kusb105a_sio_b1200; 441 break; 442 case 2400: 443 priv->cfg.baudrate = kl5kusb105a_sio_b2400; 444 break; 445 case 4800: 446 priv->cfg.baudrate = kl5kusb105a_sio_b4800; 447 break; 448 case 9600: 449 priv->cfg.baudrate = kl5kusb105a_sio_b9600; 450 break; 451 case 19200: 452 priv->cfg.baudrate = kl5kusb105a_sio_b19200; 453 break; 454 case 38400: 455 priv->cfg.baudrate = kl5kusb105a_sio_b38400; 456 break; 457 case 57600: 458 priv->cfg.baudrate = kl5kusb105a_sio_b57600; 459 break; 460 case 115200: 461 priv->cfg.baudrate = kl5kusb105a_sio_b115200; 462 break; 463 default: 464 dev_dbg(dev, "unsupported baudrate, using 9600\n"); 465 priv->cfg.baudrate = kl5kusb105a_sio_b9600; 466 baud = 9600; 467 break; 468 } 469 if ((cflag & CBAUD) == B0) { 470 dev_dbg(dev, "%s: baud is B0\n", __func__); 471 /* Drop RTS and DTR */ 472 /* maybe this should be simulated by sending read 473 * disable and read enable messages? 474 */ 475 ; 476 #if 0 477 priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); 478 mct_u232_set_modem_ctrl(serial, priv->control_state); 479 #endif 480 } 481 tty_encode_baud_rate(tty, baud, baud); 482 483 if ((cflag & CSIZE) != (old_cflag & CSIZE)) { 484 /* set the number of data bits */ 485 switch (cflag & CSIZE) { 486 case CS5: 487 dev_dbg(dev, "%s - 5 bits/byte not supported\n", __func__); 488 spin_unlock_irqrestore(&priv->lock, flags); 489 goto err; 490 case CS6: 491 dev_dbg(dev, "%s - 6 bits/byte not supported\n", __func__); 492 spin_unlock_irqrestore(&priv->lock, flags); 493 goto err; 494 case CS7: 495 priv->cfg.databits = kl5kusb105a_dtb_7; 496 break; 497 case CS8: 498 priv->cfg.databits = kl5kusb105a_dtb_8; 499 break; 500 default: 501 dev_err(dev, "CSIZE was not CS5-CS8, using default of 8\n"); 502 priv->cfg.databits = kl5kusb105a_dtb_8; 503 break; 504 } 505 } 506 507 /* 508 * Update line control register (LCR) 509 */ 510 if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD)) 511 || (cflag & CSTOPB) != (old_cflag & CSTOPB)) { 512 /* Not currently supported */ 513 tty->termios.c_cflag &= ~(PARENB|PARODD|CSTOPB); 514 #if 0 515 priv->last_lcr = 0; 516 517 /* set the parity */ 518 if (cflag & PARENB) 519 priv->last_lcr |= (cflag & PARODD) ? 520 MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN; 521 else 522 priv->last_lcr |= MCT_U232_PARITY_NONE; 523 524 /* set the number of stop bits */ 525 priv->last_lcr |= (cflag & CSTOPB) ? 526 MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1; 527 528 mct_u232_set_line_ctrl(serial, priv->last_lcr); 529 #endif 530 ; 531 } 532 /* 533 * Set flow control: well, I do not really now how to handle DTR/RTS. 534 * Just do what we have seen with SniffUSB on Win98. 535 */ 536 if ((iflag & IXOFF) != (old_iflag & IXOFF) 537 || (iflag & IXON) != (old_iflag & IXON) 538 || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { 539 /* Not currently supported */ 540 tty->termios.c_cflag &= ~CRTSCTS; 541 /* Drop DTR/RTS if no flow control otherwise assert */ 542 #if 0 543 if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS)) 544 priv->control_state |= TIOCM_DTR | TIOCM_RTS; 545 else 546 priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); 547 mct_u232_set_modem_ctrl(serial, priv->control_state); 548 #endif 549 ; 550 } 551 memcpy(cfg, &priv->cfg, sizeof(*cfg)); 552 spin_unlock_irqrestore(&priv->lock, flags); 553 554 /* now commit changes to device */ 555 klsi_105_chg_port_settings(port, cfg); 556 err: 557 kfree(cfg); 558 } 559 560 #if 0 561 static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) 562 { 563 struct usb_serial_port *port = tty->driver_data; 564 struct usb_serial *serial = port->serial; 565 struct mct_u232_private *priv = 566 (struct mct_u232_private *)port->private; 567 unsigned char lcr = priv->last_lcr; 568 569 dev_dbg(&port->dev, "%s - state=%d\n", __func__, break_state); 570 571 /* LOCKING */ 572 if (break_state) 573 lcr |= MCT_U232_SET_BREAK; 574 575 mct_u232_set_line_ctrl(serial, lcr); 576 } 577 #endif 578 579 static int klsi_105_tiocmget(struct tty_struct *tty) 580 { 581 struct usb_serial_port *port = tty->driver_data; 582 struct klsi_105_private *priv = usb_get_serial_port_data(port); 583 unsigned long flags; 584 int rc; 585 unsigned long line_state; 586 587 rc = klsi_105_get_line_state(port, &line_state); 588 if (rc < 0) { 589 dev_err(&port->dev, 590 "Reading line control failed (error = %d)\n", rc); 591 /* better return value? EAGAIN? */ 592 return rc; 593 } 594 595 spin_lock_irqsave(&priv->lock, flags); 596 priv->line_state = line_state; 597 spin_unlock_irqrestore(&priv->lock, flags); 598 dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state); 599 return (int)line_state; 600 } 601 602 module_usb_serial_driver(serial_drivers, id_table); 603 604 MODULE_AUTHOR(DRIVER_AUTHOR); 605 MODULE_DESCRIPTION(DRIVER_DESC); 606 MODULE_LICENSE("GPL"); 607