1 /* 2 Keyspan USB to Serial Converter driver 3 4 (C) Copyright (C) 2000-2001 Hugh Blemings <hugh@blemings.org> 5 (C) Copyright (C) 2002 Greg Kroah-Hartman <greg@kroah.com> 6 7 This program is free software; you can redistribute it and/or modify 8 it under the terms of the GNU General Public License as published by 9 the Free Software Foundation; either version 2 of the License, or 10 (at your option) any later version. 11 12 See http://blemings.org/hugh/keyspan.html for more information. 13 14 Code in this driver inspired by and in a number of places taken 15 from Brian Warner's original Keyspan-PDA driver. 16 17 This driver has been put together with the support of Innosys, Inc. 18 and Keyspan, Inc the manufacturers of the Keyspan USB-serial products. 19 Thanks Guys :) 20 21 Thanks to Paulus for miscellaneous tidy ups, some largish chunks 22 of much nicer and/or completely new code and (perhaps most uniquely) 23 having the patience to sit down and explain why and where he'd changed 24 stuff. 25 26 Tip 'o the hat to IBM (and previously Linuxcare :) for supporting 27 staff in their work on open source projects. 28 */ 29 30 31 #include <linux/kernel.h> 32 #include <linux/jiffies.h> 33 #include <linux/errno.h> 34 #include <linux/slab.h> 35 #include <linux/tty.h> 36 #include <linux/tty_driver.h> 37 #include <linux/tty_flip.h> 38 #include <linux/module.h> 39 #include <linux/spinlock.h> 40 #include <linux/uaccess.h> 41 #include <linux/usb.h> 42 #include <linux/usb/serial.h> 43 #include <linux/usb/ezusb.h> 44 45 #define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu" 46 #define DRIVER_DESC "Keyspan USB to Serial Converter Driver" 47 48 /* Function prototypes for Keyspan serial converter */ 49 static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port); 50 static void keyspan_close(struct usb_serial_port *port); 51 static void keyspan_dtr_rts(struct usb_serial_port *port, int on); 52 static int keyspan_startup(struct usb_serial *serial); 53 static void keyspan_disconnect(struct usb_serial *serial); 54 static void keyspan_release(struct usb_serial *serial); 55 static int keyspan_port_probe(struct usb_serial_port *port); 56 static int keyspan_port_remove(struct usb_serial_port *port); 57 static int keyspan_write_room(struct tty_struct *tty); 58 static int keyspan_write(struct tty_struct *tty, struct usb_serial_port *port, 59 const unsigned char *buf, int count); 60 static void keyspan_send_setup(struct usb_serial_port *port, int reset_port); 61 static void keyspan_set_termios(struct tty_struct *tty, 62 struct usb_serial_port *port, 63 struct ktermios *old); 64 static void keyspan_break_ctl(struct tty_struct *tty, int break_state); 65 static int keyspan_tiocmget(struct tty_struct *tty); 66 static int keyspan_tiocmset(struct tty_struct *tty, unsigned int set, 67 unsigned int clear); 68 static int keyspan_fake_startup(struct usb_serial *serial); 69 70 static int keyspan_usa19_calc_baud(struct usb_serial_port *port, 71 u32 baud_rate, u32 baudclk, 72 u8 *rate_hi, u8 *rate_low, 73 u8 *prescaler, int portnum); 74 static int keyspan_usa19w_calc_baud(struct usb_serial_port *port, 75 u32 baud_rate, u32 baudclk, 76 u8 *rate_hi, u8 *rate_low, 77 u8 *prescaler, int portnum); 78 static int keyspan_usa28_calc_baud(struct usb_serial_port *port, 79 u32 baud_rate, u32 baudclk, 80 u8 *rate_hi, u8 *rate_low, 81 u8 *prescaler, int portnum); 82 static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port, 83 u32 baud_rate, u32 baudclk, 84 u8 *rate_hi, u8 *rate_low, 85 u8 *prescaler, int portnum); 86 87 static int keyspan_usa28_send_setup(struct usb_serial *serial, 88 struct usb_serial_port *port, 89 int reset_port); 90 static int keyspan_usa26_send_setup(struct usb_serial *serial, 91 struct usb_serial_port *port, 92 int reset_port); 93 static int keyspan_usa49_send_setup(struct usb_serial *serial, 94 struct usb_serial_port *port, 95 int reset_port); 96 static int keyspan_usa90_send_setup(struct usb_serial *serial, 97 struct usb_serial_port *port, 98 int reset_port); 99 static int keyspan_usa67_send_setup(struct usb_serial *serial, 100 struct usb_serial_port *port, 101 int reset_port); 102 103 /* Values used for baud rate calculation - device specific */ 104 #define KEYSPAN_INVALID_BAUD_RATE (-1) 105 #define KEYSPAN_BAUD_RATE_OK (0) 106 #define KEYSPAN_USA18X_BAUDCLK (12000000L) /* a guess */ 107 #define KEYSPAN_USA19_BAUDCLK (12000000L) 108 #define KEYSPAN_USA19W_BAUDCLK (24000000L) 109 #define KEYSPAN_USA19HS_BAUDCLK (14769231L) 110 #define KEYSPAN_USA28_BAUDCLK (1843200L) 111 #define KEYSPAN_USA28X_BAUDCLK (12000000L) 112 #define KEYSPAN_USA49W_BAUDCLK (48000000L) 113 114 /* Some constants used to characterise each device. */ 115 #define KEYSPAN_MAX_NUM_PORTS (4) 116 #define KEYSPAN_MAX_FLIPS (2) 117 118 /* 119 * Device info for the Keyspan serial converter, used by the overall 120 * usb-serial probe function. 121 */ 122 #define KEYSPAN_VENDOR_ID (0x06cd) 123 124 /* Product IDs for the products supported, pre-renumeration */ 125 #define keyspan_usa18x_pre_product_id 0x0105 126 #define keyspan_usa19_pre_product_id 0x0103 127 #define keyspan_usa19qi_pre_product_id 0x010b 128 #define keyspan_mpr_pre_product_id 0x011b 129 #define keyspan_usa19qw_pre_product_id 0x0118 130 #define keyspan_usa19w_pre_product_id 0x0106 131 #define keyspan_usa28_pre_product_id 0x0101 132 #define keyspan_usa28x_pre_product_id 0x0102 133 #define keyspan_usa28xa_pre_product_id 0x0114 134 #define keyspan_usa28xb_pre_product_id 0x0113 135 #define keyspan_usa49w_pre_product_id 0x0109 136 #define keyspan_usa49wlc_pre_product_id 0x011a 137 138 /* 139 * Product IDs post-renumeration. Note that the 28x and 28xb have the same 140 * id's post-renumeration but behave identically so it's not an issue. As 141 * such, the 28xb is not listed in any of the device tables. 142 */ 143 #define keyspan_usa18x_product_id 0x0112 144 #define keyspan_usa19_product_id 0x0107 145 #define keyspan_usa19qi_product_id 0x010c 146 #define keyspan_usa19hs_product_id 0x0121 147 #define keyspan_mpr_product_id 0x011c 148 #define keyspan_usa19qw_product_id 0x0119 149 #define keyspan_usa19w_product_id 0x0108 150 #define keyspan_usa28_product_id 0x010f 151 #define keyspan_usa28x_product_id 0x0110 152 #define keyspan_usa28xa_product_id 0x0115 153 #define keyspan_usa28xb_product_id 0x0110 154 #define keyspan_usa28xg_product_id 0x0135 155 #define keyspan_usa49w_product_id 0x010a 156 #define keyspan_usa49wlc_product_id 0x012a 157 #define keyspan_usa49wg_product_id 0x0131 158 159 struct keyspan_device_details { 160 /* product ID value */ 161 int product_id; 162 163 enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format; 164 165 /* Number of physical ports */ 166 int num_ports; 167 168 /* 1 if endpoint flipping used on input, 0 if not */ 169 int indat_endp_flip; 170 171 /* 1 if endpoint flipping used on output, 0 if not */ 172 int outdat_endp_flip; 173 174 /* 175 * Table mapping input data endpoint IDs to physical port 176 * number and flip if used 177 */ 178 int indat_endpoints[KEYSPAN_MAX_NUM_PORTS]; 179 180 /* Same for output endpoints */ 181 int outdat_endpoints[KEYSPAN_MAX_NUM_PORTS]; 182 183 /* Input acknowledge endpoints */ 184 int inack_endpoints[KEYSPAN_MAX_NUM_PORTS]; 185 186 /* Output control endpoints */ 187 int outcont_endpoints[KEYSPAN_MAX_NUM_PORTS]; 188 189 /* Endpoint used for input status */ 190 int instat_endpoint; 191 192 /* Endpoint used for input data 49WG only */ 193 int indat_endpoint; 194 195 /* Endpoint used for global control functions */ 196 int glocont_endpoint; 197 198 int (*calculate_baud_rate)(struct usb_serial_port *port, 199 u32 baud_rate, u32 baudclk, 200 u8 *rate_hi, u8 *rate_low, u8 *prescaler, 201 int portnum); 202 u32 baudclk; 203 }; 204 205 /* 206 * Now for each device type we setup the device detail structure with the 207 * appropriate information (provided in Keyspan's documentation) 208 */ 209 210 static const struct keyspan_device_details usa18x_device_details = { 211 .product_id = keyspan_usa18x_product_id, 212 .msg_format = msg_usa26, 213 .num_ports = 1, 214 .indat_endp_flip = 0, 215 .outdat_endp_flip = 1, 216 .indat_endpoints = {0x81}, 217 .outdat_endpoints = {0x01}, 218 .inack_endpoints = {0x85}, 219 .outcont_endpoints = {0x05}, 220 .instat_endpoint = 0x87, 221 .indat_endpoint = -1, 222 .glocont_endpoint = 0x07, 223 .calculate_baud_rate = keyspan_usa19w_calc_baud, 224 .baudclk = KEYSPAN_USA18X_BAUDCLK, 225 }; 226 227 static const struct keyspan_device_details usa19_device_details = { 228 .product_id = keyspan_usa19_product_id, 229 .msg_format = msg_usa28, 230 .num_ports = 1, 231 .indat_endp_flip = 1, 232 .outdat_endp_flip = 1, 233 .indat_endpoints = {0x81}, 234 .outdat_endpoints = {0x01}, 235 .inack_endpoints = {0x83}, 236 .outcont_endpoints = {0x03}, 237 .instat_endpoint = 0x84, 238 .indat_endpoint = -1, 239 .glocont_endpoint = -1, 240 .calculate_baud_rate = keyspan_usa19_calc_baud, 241 .baudclk = KEYSPAN_USA19_BAUDCLK, 242 }; 243 244 static const struct keyspan_device_details usa19qi_device_details = { 245 .product_id = keyspan_usa19qi_product_id, 246 .msg_format = msg_usa28, 247 .num_ports = 1, 248 .indat_endp_flip = 1, 249 .outdat_endp_flip = 1, 250 .indat_endpoints = {0x81}, 251 .outdat_endpoints = {0x01}, 252 .inack_endpoints = {0x83}, 253 .outcont_endpoints = {0x03}, 254 .instat_endpoint = 0x84, 255 .indat_endpoint = -1, 256 .glocont_endpoint = -1, 257 .calculate_baud_rate = keyspan_usa28_calc_baud, 258 .baudclk = KEYSPAN_USA19_BAUDCLK, 259 }; 260 261 static const struct keyspan_device_details mpr_device_details = { 262 .product_id = keyspan_mpr_product_id, 263 .msg_format = msg_usa28, 264 .num_ports = 1, 265 .indat_endp_flip = 1, 266 .outdat_endp_flip = 1, 267 .indat_endpoints = {0x81}, 268 .outdat_endpoints = {0x01}, 269 .inack_endpoints = {0x83}, 270 .outcont_endpoints = {0x03}, 271 .instat_endpoint = 0x84, 272 .indat_endpoint = -1, 273 .glocont_endpoint = -1, 274 .calculate_baud_rate = keyspan_usa28_calc_baud, 275 .baudclk = KEYSPAN_USA19_BAUDCLK, 276 }; 277 278 static const struct keyspan_device_details usa19qw_device_details = { 279 .product_id = keyspan_usa19qw_product_id, 280 .msg_format = msg_usa26, 281 .num_ports = 1, 282 .indat_endp_flip = 0, 283 .outdat_endp_flip = 1, 284 .indat_endpoints = {0x81}, 285 .outdat_endpoints = {0x01}, 286 .inack_endpoints = {0x85}, 287 .outcont_endpoints = {0x05}, 288 .instat_endpoint = 0x87, 289 .indat_endpoint = -1, 290 .glocont_endpoint = 0x07, 291 .calculate_baud_rate = keyspan_usa19w_calc_baud, 292 .baudclk = KEYSPAN_USA19W_BAUDCLK, 293 }; 294 295 static const struct keyspan_device_details usa19w_device_details = { 296 .product_id = keyspan_usa19w_product_id, 297 .msg_format = msg_usa26, 298 .num_ports = 1, 299 .indat_endp_flip = 0, 300 .outdat_endp_flip = 1, 301 .indat_endpoints = {0x81}, 302 .outdat_endpoints = {0x01}, 303 .inack_endpoints = {0x85}, 304 .outcont_endpoints = {0x05}, 305 .instat_endpoint = 0x87, 306 .indat_endpoint = -1, 307 .glocont_endpoint = 0x07, 308 .calculate_baud_rate = keyspan_usa19w_calc_baud, 309 .baudclk = KEYSPAN_USA19W_BAUDCLK, 310 }; 311 312 static const struct keyspan_device_details usa19hs_device_details = { 313 .product_id = keyspan_usa19hs_product_id, 314 .msg_format = msg_usa90, 315 .num_ports = 1, 316 .indat_endp_flip = 0, 317 .outdat_endp_flip = 0, 318 .indat_endpoints = {0x81}, 319 .outdat_endpoints = {0x01}, 320 .inack_endpoints = {-1}, 321 .outcont_endpoints = {0x02}, 322 .instat_endpoint = 0x82, 323 .indat_endpoint = -1, 324 .glocont_endpoint = -1, 325 .calculate_baud_rate = keyspan_usa19hs_calc_baud, 326 .baudclk = KEYSPAN_USA19HS_BAUDCLK, 327 }; 328 329 static const struct keyspan_device_details usa28_device_details = { 330 .product_id = keyspan_usa28_product_id, 331 .msg_format = msg_usa28, 332 .num_ports = 2, 333 .indat_endp_flip = 1, 334 .outdat_endp_flip = 1, 335 .indat_endpoints = {0x81, 0x83}, 336 .outdat_endpoints = {0x01, 0x03}, 337 .inack_endpoints = {0x85, 0x86}, 338 .outcont_endpoints = {0x05, 0x06}, 339 .instat_endpoint = 0x87, 340 .indat_endpoint = -1, 341 .glocont_endpoint = 0x07, 342 .calculate_baud_rate = keyspan_usa28_calc_baud, 343 .baudclk = KEYSPAN_USA28_BAUDCLK, 344 }; 345 346 static const struct keyspan_device_details usa28x_device_details = { 347 .product_id = keyspan_usa28x_product_id, 348 .msg_format = msg_usa26, 349 .num_ports = 2, 350 .indat_endp_flip = 0, 351 .outdat_endp_flip = 1, 352 .indat_endpoints = {0x81, 0x83}, 353 .outdat_endpoints = {0x01, 0x03}, 354 .inack_endpoints = {0x85, 0x86}, 355 .outcont_endpoints = {0x05, 0x06}, 356 .instat_endpoint = 0x87, 357 .indat_endpoint = -1, 358 .glocont_endpoint = 0x07, 359 .calculate_baud_rate = keyspan_usa19w_calc_baud, 360 .baudclk = KEYSPAN_USA28X_BAUDCLK, 361 }; 362 363 static const struct keyspan_device_details usa28xa_device_details = { 364 .product_id = keyspan_usa28xa_product_id, 365 .msg_format = msg_usa26, 366 .num_ports = 2, 367 .indat_endp_flip = 0, 368 .outdat_endp_flip = 1, 369 .indat_endpoints = {0x81, 0x83}, 370 .outdat_endpoints = {0x01, 0x03}, 371 .inack_endpoints = {0x85, 0x86}, 372 .outcont_endpoints = {0x05, 0x06}, 373 .instat_endpoint = 0x87, 374 .indat_endpoint = -1, 375 .glocont_endpoint = 0x07, 376 .calculate_baud_rate = keyspan_usa19w_calc_baud, 377 .baudclk = KEYSPAN_USA28X_BAUDCLK, 378 }; 379 380 static const struct keyspan_device_details usa28xg_device_details = { 381 .product_id = keyspan_usa28xg_product_id, 382 .msg_format = msg_usa67, 383 .num_ports = 2, 384 .indat_endp_flip = 0, 385 .outdat_endp_flip = 0, 386 .indat_endpoints = {0x84, 0x88}, 387 .outdat_endpoints = {0x02, 0x06}, 388 .inack_endpoints = {-1, -1}, 389 .outcont_endpoints = {-1, -1}, 390 .instat_endpoint = 0x81, 391 .indat_endpoint = -1, 392 .glocont_endpoint = 0x01, 393 .calculate_baud_rate = keyspan_usa19w_calc_baud, 394 .baudclk = KEYSPAN_USA28X_BAUDCLK, 395 }; 396 /* 397 * We don't need a separate entry for the usa28xb as it appears as a 28x 398 * anyway. 399 */ 400 401 static const struct keyspan_device_details usa49w_device_details = { 402 .product_id = keyspan_usa49w_product_id, 403 .msg_format = msg_usa49, 404 .num_ports = 4, 405 .indat_endp_flip = 0, 406 .outdat_endp_flip = 0, 407 .indat_endpoints = {0x81, 0x82, 0x83, 0x84}, 408 .outdat_endpoints = {0x01, 0x02, 0x03, 0x04}, 409 .inack_endpoints = {-1, -1, -1, -1}, 410 .outcont_endpoints = {-1, -1, -1, -1}, 411 .instat_endpoint = 0x87, 412 .indat_endpoint = -1, 413 .glocont_endpoint = 0x07, 414 .calculate_baud_rate = keyspan_usa19w_calc_baud, 415 .baudclk = KEYSPAN_USA49W_BAUDCLK, 416 }; 417 418 static const struct keyspan_device_details usa49wlc_device_details = { 419 .product_id = keyspan_usa49wlc_product_id, 420 .msg_format = msg_usa49, 421 .num_ports = 4, 422 .indat_endp_flip = 0, 423 .outdat_endp_flip = 0, 424 .indat_endpoints = {0x81, 0x82, 0x83, 0x84}, 425 .outdat_endpoints = {0x01, 0x02, 0x03, 0x04}, 426 .inack_endpoints = {-1, -1, -1, -1}, 427 .outcont_endpoints = {-1, -1, -1, -1}, 428 .instat_endpoint = 0x87, 429 .indat_endpoint = -1, 430 .glocont_endpoint = 0x07, 431 .calculate_baud_rate = keyspan_usa19w_calc_baud, 432 .baudclk = KEYSPAN_USA19W_BAUDCLK, 433 }; 434 435 static const struct keyspan_device_details usa49wg_device_details = { 436 .product_id = keyspan_usa49wg_product_id, 437 .msg_format = msg_usa49, 438 .num_ports = 4, 439 .indat_endp_flip = 0, 440 .outdat_endp_flip = 0, 441 .indat_endpoints = {-1, -1, -1, -1}, /* single 'global' data in EP */ 442 .outdat_endpoints = {0x01, 0x02, 0x04, 0x06}, 443 .inack_endpoints = {-1, -1, -1, -1}, 444 .outcont_endpoints = {-1, -1, -1, -1}, 445 .instat_endpoint = 0x81, 446 .indat_endpoint = 0x88, 447 .glocont_endpoint = 0x00, /* uses control EP */ 448 .calculate_baud_rate = keyspan_usa19w_calc_baud, 449 .baudclk = KEYSPAN_USA19W_BAUDCLK, 450 }; 451 452 static const struct keyspan_device_details *keyspan_devices[] = { 453 &usa18x_device_details, 454 &usa19_device_details, 455 &usa19qi_device_details, 456 &mpr_device_details, 457 &usa19qw_device_details, 458 &usa19w_device_details, 459 &usa19hs_device_details, 460 &usa28_device_details, 461 &usa28x_device_details, 462 &usa28xa_device_details, 463 &usa28xg_device_details, 464 /* 28xb not required as it renumerates as a 28x */ 465 &usa49w_device_details, 466 &usa49wlc_device_details, 467 &usa49wg_device_details, 468 NULL, 469 }; 470 471 static const struct usb_device_id keyspan_ids_combined[] = { 472 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, 473 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, 474 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) }, 475 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) }, 476 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) }, 477 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) }, 478 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) }, 479 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) }, 480 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) }, 481 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) }, 482 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) }, 483 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) }, 484 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) }, 485 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) }, 486 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) }, 487 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) }, 488 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) }, 489 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) }, 490 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) }, 491 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, 492 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, 493 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, 494 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, 495 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)}, 496 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, 497 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)}, 498 { } /* Terminating entry */ 499 }; 500 501 MODULE_DEVICE_TABLE(usb, keyspan_ids_combined); 502 503 /* usb_device_id table for the pre-firmware download keyspan devices */ 504 static const struct usb_device_id keyspan_pre_ids[] = { 505 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, 506 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, 507 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) }, 508 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) }, 509 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) }, 510 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) }, 511 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) }, 512 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) }, 513 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) }, 514 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) }, 515 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) }, 516 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) }, 517 { } /* Terminating entry */ 518 }; 519 520 static const struct usb_device_id keyspan_1port_ids[] = { 521 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) }, 522 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) }, 523 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) }, 524 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) }, 525 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) }, 526 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) }, 527 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) }, 528 { } /* Terminating entry */ 529 }; 530 531 static const struct usb_device_id keyspan_2port_ids[] = { 532 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, 533 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, 534 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, 535 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, 536 { } /* Terminating entry */ 537 }; 538 539 static const struct usb_device_id keyspan_4port_ids[] = { 540 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) }, 541 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, 542 { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)}, 543 { } /* Terminating entry */ 544 }; 545 546 #define INSTAT_BUFLEN 32 547 #define GLOCONT_BUFLEN 64 548 #define INDAT49W_BUFLEN 512 549 #define IN_BUFLEN 64 550 #define OUT_BUFLEN 64 551 #define INACK_BUFLEN 1 552 #define OUTCONT_BUFLEN 64 553 554 /* Per device and per port private data */ 555 struct keyspan_serial_private { 556 const struct keyspan_device_details *device_details; 557 558 struct urb *instat_urb; 559 char *instat_buf; 560 561 /* added to support 49wg, where data from all 4 ports comes in 562 on 1 EP and high-speed supported */ 563 struct urb *indat_urb; 564 char *indat_buf; 565 566 /* XXX this one probably will need a lock */ 567 struct urb *glocont_urb; 568 char *glocont_buf; 569 char *ctrl_buf; /* for EP0 control message */ 570 }; 571 572 struct keyspan_port_private { 573 /* Keep track of which input & output endpoints to use */ 574 int in_flip; 575 int out_flip; 576 577 /* Keep duplicate of device details in each port 578 structure as well - simplifies some of the 579 callback functions etc. */ 580 const struct keyspan_device_details *device_details; 581 582 /* Input endpoints and buffer for this port */ 583 struct urb *in_urbs[2]; 584 char *in_buffer[2]; 585 /* Output endpoints and buffer for this port */ 586 struct urb *out_urbs[2]; 587 char *out_buffer[2]; 588 589 /* Input ack endpoint */ 590 struct urb *inack_urb; 591 char *inack_buffer; 592 593 /* Output control endpoint */ 594 struct urb *outcont_urb; 595 char *outcont_buffer; 596 597 /* Settings for the port */ 598 int baud; 599 int old_baud; 600 unsigned int cflag; 601 unsigned int old_cflag; 602 enum {flow_none, flow_cts, flow_xon} flow_control; 603 int rts_state; /* Handshaking pins (outputs) */ 604 int dtr_state; 605 int cts_state; /* Handshaking pins (inputs) */ 606 int dsr_state; 607 int dcd_state; 608 int ri_state; 609 int break_on; 610 611 unsigned long tx_start_time[2]; 612 int resend_cont; /* need to resend control packet */ 613 }; 614 615 /* Include Keyspan message headers. All current Keyspan Adapters 616 make use of one of five message formats which are referred 617 to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and 618 within this driver. */ 619 #include "keyspan_usa26msg.h" 620 #include "keyspan_usa28msg.h" 621 #include "keyspan_usa49msg.h" 622 #include "keyspan_usa90msg.h" 623 #include "keyspan_usa67msg.h" 624 625 626 static void keyspan_break_ctl(struct tty_struct *tty, int break_state) 627 { 628 struct usb_serial_port *port = tty->driver_data; 629 struct keyspan_port_private *p_priv; 630 631 p_priv = usb_get_serial_port_data(port); 632 633 if (break_state == -1) 634 p_priv->break_on = 1; 635 else 636 p_priv->break_on = 0; 637 638 keyspan_send_setup(port, 0); 639 } 640 641 642 static void keyspan_set_termios(struct tty_struct *tty, 643 struct usb_serial_port *port, struct ktermios *old_termios) 644 { 645 int baud_rate, device_port; 646 struct keyspan_port_private *p_priv; 647 const struct keyspan_device_details *d_details; 648 unsigned int cflag; 649 650 p_priv = usb_get_serial_port_data(port); 651 d_details = p_priv->device_details; 652 cflag = tty->termios.c_cflag; 653 device_port = port->port_number; 654 655 /* Baud rate calculation takes baud rate as an integer 656 so other rates can be generated if desired. */ 657 baud_rate = tty_get_baud_rate(tty); 658 /* If no match or invalid, don't change */ 659 if (d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk, 660 NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { 661 /* FIXME - more to do here to ensure rate changes cleanly */ 662 /* FIXME - calculate exact rate from divisor ? */ 663 p_priv->baud = baud_rate; 664 } else 665 baud_rate = tty_termios_baud_rate(old_termios); 666 667 tty_encode_baud_rate(tty, baud_rate, baud_rate); 668 /* set CTS/RTS handshake etc. */ 669 p_priv->cflag = cflag; 670 p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none; 671 672 /* Mark/Space not supported */ 673 tty->termios.c_cflag &= ~CMSPAR; 674 675 keyspan_send_setup(port, 0); 676 } 677 678 static int keyspan_tiocmget(struct tty_struct *tty) 679 { 680 struct usb_serial_port *port = tty->driver_data; 681 struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); 682 unsigned int value; 683 684 value = ((p_priv->rts_state) ? TIOCM_RTS : 0) | 685 ((p_priv->dtr_state) ? TIOCM_DTR : 0) | 686 ((p_priv->cts_state) ? TIOCM_CTS : 0) | 687 ((p_priv->dsr_state) ? TIOCM_DSR : 0) | 688 ((p_priv->dcd_state) ? TIOCM_CAR : 0) | 689 ((p_priv->ri_state) ? TIOCM_RNG : 0); 690 691 return value; 692 } 693 694 static int keyspan_tiocmset(struct tty_struct *tty, 695 unsigned int set, unsigned int clear) 696 { 697 struct usb_serial_port *port = tty->driver_data; 698 struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); 699 700 if (set & TIOCM_RTS) 701 p_priv->rts_state = 1; 702 if (set & TIOCM_DTR) 703 p_priv->dtr_state = 1; 704 if (clear & TIOCM_RTS) 705 p_priv->rts_state = 0; 706 if (clear & TIOCM_DTR) 707 p_priv->dtr_state = 0; 708 keyspan_send_setup(port, 0); 709 return 0; 710 } 711 712 /* Write function is similar for the four protocols used 713 with only a minor change for usa90 (usa19hs) required */ 714 static int keyspan_write(struct tty_struct *tty, 715 struct usb_serial_port *port, const unsigned char *buf, int count) 716 { 717 struct keyspan_port_private *p_priv; 718 const struct keyspan_device_details *d_details; 719 int flip; 720 int left, todo; 721 struct urb *this_urb; 722 int err, maxDataLen, dataOffset; 723 724 p_priv = usb_get_serial_port_data(port); 725 d_details = p_priv->device_details; 726 727 if (d_details->msg_format == msg_usa90) { 728 maxDataLen = 64; 729 dataOffset = 0; 730 } else { 731 maxDataLen = 63; 732 dataOffset = 1; 733 } 734 735 dev_dbg(&port->dev, "%s - %d chars, flip=%d\n", __func__, count, 736 p_priv->out_flip); 737 738 for (left = count; left > 0; left -= todo) { 739 todo = left; 740 if (todo > maxDataLen) 741 todo = maxDataLen; 742 743 flip = p_priv->out_flip; 744 745 /* Check we have a valid urb/endpoint before we use it... */ 746 this_urb = p_priv->out_urbs[flip]; 747 if (this_urb == NULL) { 748 /* no bulk out, so return 0 bytes written */ 749 dev_dbg(&port->dev, "%s - no output urb :(\n", __func__); 750 return count; 751 } 752 753 dev_dbg(&port->dev, "%s - endpoint %x flip %d\n", 754 __func__, usb_pipeendpoint(this_urb->pipe), flip); 755 756 if (this_urb->status == -EINPROGRESS) { 757 if (time_before(jiffies, 758 p_priv->tx_start_time[flip] + 10 * HZ)) 759 break; 760 usb_unlink_urb(this_urb); 761 break; 762 } 763 764 /* First byte in buffer is "last flag" (except for usa19hx) 765 - unused so for now so set to zero */ 766 ((char *)this_urb->transfer_buffer)[0] = 0; 767 768 memcpy(this_urb->transfer_buffer + dataOffset, buf, todo); 769 buf += todo; 770 771 /* send the data out the bulk port */ 772 this_urb->transfer_buffer_length = todo + dataOffset; 773 774 err = usb_submit_urb(this_urb, GFP_ATOMIC); 775 if (err != 0) 776 dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed (%d)\n", err); 777 p_priv->tx_start_time[flip] = jiffies; 778 779 /* Flip for next time if usa26 or usa28 interface 780 (not used on usa49) */ 781 p_priv->out_flip = (flip + 1) & d_details->outdat_endp_flip; 782 } 783 784 return count - left; 785 } 786 787 static void usa26_indat_callback(struct urb *urb) 788 { 789 int i, err; 790 int endpoint; 791 struct usb_serial_port *port; 792 unsigned char *data = urb->transfer_buffer; 793 int status = urb->status; 794 795 endpoint = usb_pipeendpoint(urb->pipe); 796 797 if (status) { 798 dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n", 799 __func__, status, endpoint); 800 return; 801 } 802 803 port = urb->context; 804 if (urb->actual_length) { 805 /* 0x80 bit is error flag */ 806 if ((data[0] & 0x80) == 0) { 807 /* no errors on individual bytes, only 808 possible overrun err */ 809 if (data[0] & RXERROR_OVERRUN) { 810 tty_insert_flip_char(&port->port, 0, 811 TTY_OVERRUN); 812 } 813 for (i = 1; i < urb->actual_length ; ++i) 814 tty_insert_flip_char(&port->port, data[i], 815 TTY_NORMAL); 816 } else { 817 /* some bytes had errors, every byte has status */ 818 dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); 819 for (i = 0; i + 1 < urb->actual_length; i += 2) { 820 int stat = data[i]; 821 int flag = TTY_NORMAL; 822 823 if (stat & RXERROR_OVERRUN) { 824 tty_insert_flip_char(&port->port, 0, 825 TTY_OVERRUN); 826 } 827 /* XXX should handle break (0x10) */ 828 if (stat & RXERROR_PARITY) 829 flag = TTY_PARITY; 830 else if (stat & RXERROR_FRAMING) 831 flag = TTY_FRAME; 832 833 tty_insert_flip_char(&port->port, data[i+1], 834 flag); 835 } 836 } 837 tty_flip_buffer_push(&port->port); 838 } 839 840 /* Resubmit urb so we continue receiving */ 841 err = usb_submit_urb(urb, GFP_ATOMIC); 842 if (err != 0) 843 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 844 } 845 846 /* Outdat handling is common for all devices */ 847 static void usa2x_outdat_callback(struct urb *urb) 848 { 849 struct usb_serial_port *port; 850 struct keyspan_port_private *p_priv; 851 852 port = urb->context; 853 p_priv = usb_get_serial_port_data(port); 854 dev_dbg(&port->dev, "%s - urb %d\n", __func__, urb == p_priv->out_urbs[1]); 855 856 usb_serial_port_softint(port); 857 } 858 859 static void usa26_inack_callback(struct urb *urb) 860 { 861 } 862 863 static void usa26_outcont_callback(struct urb *urb) 864 { 865 struct usb_serial_port *port; 866 struct keyspan_port_private *p_priv; 867 868 port = urb->context; 869 p_priv = usb_get_serial_port_data(port); 870 871 if (p_priv->resend_cont) { 872 dev_dbg(&port->dev, "%s - sending setup\n", __func__); 873 keyspan_usa26_send_setup(port->serial, port, 874 p_priv->resend_cont - 1); 875 } 876 } 877 878 static void usa26_instat_callback(struct urb *urb) 879 { 880 unsigned char *data = urb->transfer_buffer; 881 struct keyspan_usa26_portStatusMessage *msg; 882 struct usb_serial *serial; 883 struct usb_serial_port *port; 884 struct keyspan_port_private *p_priv; 885 int old_dcd_state, err; 886 int status = urb->status; 887 888 serial = urb->context; 889 890 if (status) { 891 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n", 892 __func__, status); 893 return; 894 } 895 if (urb->actual_length != 9) { 896 dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length); 897 goto exit; 898 } 899 900 msg = (struct keyspan_usa26_portStatusMessage *)data; 901 902 /* Check port number from message and retrieve private data */ 903 if (msg->port >= serial->num_ports) { 904 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); 905 goto exit; 906 } 907 port = serial->port[msg->port]; 908 p_priv = usb_get_serial_port_data(port); 909 if (!p_priv) 910 goto resubmit; 911 912 /* Update handshaking pin state information */ 913 old_dcd_state = p_priv->dcd_state; 914 p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0); 915 p_priv->dsr_state = ((msg->dsr) ? 1 : 0); 916 p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0); 917 p_priv->ri_state = ((msg->ri) ? 1 : 0); 918 919 if (old_dcd_state != p_priv->dcd_state) 920 tty_port_tty_hangup(&port->port, true); 921 resubmit: 922 /* Resubmit urb so we continue receiving */ 923 err = usb_submit_urb(urb, GFP_ATOMIC); 924 if (err != 0) 925 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 926 exit: ; 927 } 928 929 static void usa26_glocont_callback(struct urb *urb) 930 { 931 } 932 933 934 static void usa28_indat_callback(struct urb *urb) 935 { 936 int err; 937 struct usb_serial_port *port; 938 unsigned char *data; 939 struct keyspan_port_private *p_priv; 940 int status = urb->status; 941 942 port = urb->context; 943 p_priv = usb_get_serial_port_data(port); 944 data = urb->transfer_buffer; 945 946 if (urb != p_priv->in_urbs[p_priv->in_flip]) 947 return; 948 949 do { 950 if (status) { 951 dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n", 952 __func__, status, usb_pipeendpoint(urb->pipe)); 953 return; 954 } 955 956 port = urb->context; 957 p_priv = usb_get_serial_port_data(port); 958 data = urb->transfer_buffer; 959 960 if (urb->actual_length) { 961 tty_insert_flip_string(&port->port, data, 962 urb->actual_length); 963 tty_flip_buffer_push(&port->port); 964 } 965 966 /* Resubmit urb so we continue receiving */ 967 err = usb_submit_urb(urb, GFP_ATOMIC); 968 if (err != 0) 969 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", 970 __func__, err); 971 p_priv->in_flip ^= 1; 972 973 urb = p_priv->in_urbs[p_priv->in_flip]; 974 } while (urb->status != -EINPROGRESS); 975 } 976 977 static void usa28_inack_callback(struct urb *urb) 978 { 979 } 980 981 static void usa28_outcont_callback(struct urb *urb) 982 { 983 struct usb_serial_port *port; 984 struct keyspan_port_private *p_priv; 985 986 port = urb->context; 987 p_priv = usb_get_serial_port_data(port); 988 989 if (p_priv->resend_cont) { 990 dev_dbg(&port->dev, "%s - sending setup\n", __func__); 991 keyspan_usa28_send_setup(port->serial, port, 992 p_priv->resend_cont - 1); 993 } 994 } 995 996 static void usa28_instat_callback(struct urb *urb) 997 { 998 int err; 999 unsigned char *data = urb->transfer_buffer; 1000 struct keyspan_usa28_portStatusMessage *msg; 1001 struct usb_serial *serial; 1002 struct usb_serial_port *port; 1003 struct keyspan_port_private *p_priv; 1004 int old_dcd_state; 1005 int status = urb->status; 1006 1007 serial = urb->context; 1008 1009 if (status) { 1010 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n", 1011 __func__, status); 1012 return; 1013 } 1014 1015 if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) { 1016 dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); 1017 goto exit; 1018 } 1019 1020 msg = (struct keyspan_usa28_portStatusMessage *)data; 1021 1022 /* Check port number from message and retrieve private data */ 1023 if (msg->port >= serial->num_ports) { 1024 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); 1025 goto exit; 1026 } 1027 port = serial->port[msg->port]; 1028 p_priv = usb_get_serial_port_data(port); 1029 if (!p_priv) 1030 goto resubmit; 1031 1032 /* Update handshaking pin state information */ 1033 old_dcd_state = p_priv->dcd_state; 1034 p_priv->cts_state = ((msg->cts) ? 1 : 0); 1035 p_priv->dsr_state = ((msg->dsr) ? 1 : 0); 1036 p_priv->dcd_state = ((msg->dcd) ? 1 : 0); 1037 p_priv->ri_state = ((msg->ri) ? 1 : 0); 1038 1039 if (old_dcd_state != p_priv->dcd_state && old_dcd_state) 1040 tty_port_tty_hangup(&port->port, true); 1041 resubmit: 1042 /* Resubmit urb so we continue receiving */ 1043 err = usb_submit_urb(urb, GFP_ATOMIC); 1044 if (err != 0) 1045 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 1046 exit: ; 1047 } 1048 1049 static void usa28_glocont_callback(struct urb *urb) 1050 { 1051 } 1052 1053 1054 static void usa49_glocont_callback(struct urb *urb) 1055 { 1056 struct usb_serial *serial; 1057 struct usb_serial_port *port; 1058 struct keyspan_port_private *p_priv; 1059 int i; 1060 1061 serial = urb->context; 1062 for (i = 0; i < serial->num_ports; ++i) { 1063 port = serial->port[i]; 1064 p_priv = usb_get_serial_port_data(port); 1065 1066 if (p_priv->resend_cont) { 1067 dev_dbg(&port->dev, "%s - sending setup\n", __func__); 1068 keyspan_usa49_send_setup(serial, port, 1069 p_priv->resend_cont - 1); 1070 break; 1071 } 1072 } 1073 } 1074 1075 /* This is actually called glostat in the Keyspan 1076 doco */ 1077 static void usa49_instat_callback(struct urb *urb) 1078 { 1079 int err; 1080 unsigned char *data = urb->transfer_buffer; 1081 struct keyspan_usa49_portStatusMessage *msg; 1082 struct usb_serial *serial; 1083 struct usb_serial_port *port; 1084 struct keyspan_port_private *p_priv; 1085 int old_dcd_state; 1086 int status = urb->status; 1087 1088 serial = urb->context; 1089 1090 if (status) { 1091 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n", 1092 __func__, status); 1093 return; 1094 } 1095 1096 if (urb->actual_length != 1097 sizeof(struct keyspan_usa49_portStatusMessage)) { 1098 dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); 1099 goto exit; 1100 } 1101 1102 msg = (struct keyspan_usa49_portStatusMessage *)data; 1103 1104 /* Check port number from message and retrieve private data */ 1105 if (msg->portNumber >= serial->num_ports) { 1106 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", 1107 __func__, msg->portNumber); 1108 goto exit; 1109 } 1110 port = serial->port[msg->portNumber]; 1111 p_priv = usb_get_serial_port_data(port); 1112 if (!p_priv) 1113 goto resubmit; 1114 1115 /* Update handshaking pin state information */ 1116 old_dcd_state = p_priv->dcd_state; 1117 p_priv->cts_state = ((msg->cts) ? 1 : 0); 1118 p_priv->dsr_state = ((msg->dsr) ? 1 : 0); 1119 p_priv->dcd_state = ((msg->dcd) ? 1 : 0); 1120 p_priv->ri_state = ((msg->ri) ? 1 : 0); 1121 1122 if (old_dcd_state != p_priv->dcd_state && old_dcd_state) 1123 tty_port_tty_hangup(&port->port, true); 1124 resubmit: 1125 /* Resubmit urb so we continue receiving */ 1126 err = usb_submit_urb(urb, GFP_ATOMIC); 1127 if (err != 0) 1128 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 1129 exit: ; 1130 } 1131 1132 static void usa49_inack_callback(struct urb *urb) 1133 { 1134 } 1135 1136 static void usa49_indat_callback(struct urb *urb) 1137 { 1138 int i, err; 1139 int endpoint; 1140 struct usb_serial_port *port; 1141 unsigned char *data = urb->transfer_buffer; 1142 int status = urb->status; 1143 1144 endpoint = usb_pipeendpoint(urb->pipe); 1145 1146 if (status) { 1147 dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n", 1148 __func__, status, endpoint); 1149 return; 1150 } 1151 1152 port = urb->context; 1153 if (urb->actual_length) { 1154 /* 0x80 bit is error flag */ 1155 if ((data[0] & 0x80) == 0) { 1156 /* no error on any byte */ 1157 tty_insert_flip_string(&port->port, data + 1, 1158 urb->actual_length - 1); 1159 } else { 1160 /* some bytes had errors, every byte has status */ 1161 for (i = 0; i + 1 < urb->actual_length; i += 2) { 1162 int stat = data[i]; 1163 int flag = TTY_NORMAL; 1164 1165 if (stat & RXERROR_OVERRUN) { 1166 tty_insert_flip_char(&port->port, 0, 1167 TTY_OVERRUN); 1168 } 1169 /* XXX should handle break (0x10) */ 1170 if (stat & RXERROR_PARITY) 1171 flag = TTY_PARITY; 1172 else if (stat & RXERROR_FRAMING) 1173 flag = TTY_FRAME; 1174 1175 tty_insert_flip_char(&port->port, data[i+1], 1176 flag); 1177 } 1178 } 1179 tty_flip_buffer_push(&port->port); 1180 } 1181 1182 /* Resubmit urb so we continue receiving */ 1183 err = usb_submit_urb(urb, GFP_ATOMIC); 1184 if (err != 0) 1185 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 1186 } 1187 1188 static void usa49wg_indat_callback(struct urb *urb) 1189 { 1190 int i, len, x, err; 1191 struct usb_serial *serial; 1192 struct usb_serial_port *port; 1193 unsigned char *data = urb->transfer_buffer; 1194 int status = urb->status; 1195 1196 serial = urb->context; 1197 1198 if (status) { 1199 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n", 1200 __func__, status); 1201 return; 1202 } 1203 1204 /* inbound data is in the form P#, len, status, data */ 1205 i = 0; 1206 len = 0; 1207 1208 while (i < urb->actual_length) { 1209 1210 /* Check port number from message */ 1211 if (data[i] >= serial->num_ports) { 1212 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", 1213 __func__, data[i]); 1214 return; 1215 } 1216 port = serial->port[data[i++]]; 1217 len = data[i++]; 1218 1219 /* 0x80 bit is error flag */ 1220 if ((data[i] & 0x80) == 0) { 1221 /* no error on any byte */ 1222 i++; 1223 for (x = 1; x < len && i < urb->actual_length; ++x) 1224 tty_insert_flip_char(&port->port, 1225 data[i++], 0); 1226 } else { 1227 /* 1228 * some bytes had errors, every byte has status 1229 */ 1230 for (x = 0; x + 1 < len && 1231 i + 1 < urb->actual_length; x += 2) { 1232 int stat = data[i]; 1233 int flag = TTY_NORMAL; 1234 1235 if (stat & RXERROR_OVERRUN) { 1236 tty_insert_flip_char(&port->port, 0, 1237 TTY_OVERRUN); 1238 } 1239 /* XXX should handle break (0x10) */ 1240 if (stat & RXERROR_PARITY) 1241 flag = TTY_PARITY; 1242 else if (stat & RXERROR_FRAMING) 1243 flag = TTY_FRAME; 1244 1245 tty_insert_flip_char(&port->port, data[i+1], 1246 flag); 1247 i += 2; 1248 } 1249 } 1250 tty_flip_buffer_push(&port->port); 1251 } 1252 1253 /* Resubmit urb so we continue receiving */ 1254 err = usb_submit_urb(urb, GFP_ATOMIC); 1255 if (err != 0) 1256 dev_dbg(&urb->dev->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 1257 } 1258 1259 /* not used, usa-49 doesn't have per-port control endpoints */ 1260 static void usa49_outcont_callback(struct urb *urb) 1261 { 1262 } 1263 1264 static void usa90_indat_callback(struct urb *urb) 1265 { 1266 int i, err; 1267 int endpoint; 1268 struct usb_serial_port *port; 1269 struct keyspan_port_private *p_priv; 1270 unsigned char *data = urb->transfer_buffer; 1271 int status = urb->status; 1272 1273 endpoint = usb_pipeendpoint(urb->pipe); 1274 1275 if (status) { 1276 dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n", 1277 __func__, status, endpoint); 1278 return; 1279 } 1280 1281 port = urb->context; 1282 p_priv = usb_get_serial_port_data(port); 1283 1284 if (urb->actual_length) { 1285 /* if current mode is DMA, looks like usa28 format 1286 otherwise looks like usa26 data format */ 1287 1288 if (p_priv->baud > 57600) 1289 tty_insert_flip_string(&port->port, data, 1290 urb->actual_length); 1291 else { 1292 /* 0x80 bit is error flag */ 1293 if ((data[0] & 0x80) == 0) { 1294 /* no errors on individual bytes, only 1295 possible overrun err*/ 1296 if (data[0] & RXERROR_OVERRUN) { 1297 tty_insert_flip_char(&port->port, 0, 1298 TTY_OVERRUN); 1299 } 1300 for (i = 1; i < urb->actual_length ; ++i) 1301 tty_insert_flip_char(&port->port, 1302 data[i], TTY_NORMAL); 1303 } else { 1304 /* some bytes had errors, every byte has status */ 1305 dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); 1306 for (i = 0; i + 1 < urb->actual_length; i += 2) { 1307 int stat = data[i]; 1308 int flag = TTY_NORMAL; 1309 1310 if (stat & RXERROR_OVERRUN) { 1311 tty_insert_flip_char( 1312 &port->port, 0, 1313 TTY_OVERRUN); 1314 } 1315 /* XXX should handle break (0x10) */ 1316 if (stat & RXERROR_PARITY) 1317 flag = TTY_PARITY; 1318 else if (stat & RXERROR_FRAMING) 1319 flag = TTY_FRAME; 1320 1321 tty_insert_flip_char(&port->port, 1322 data[i+1], flag); 1323 } 1324 } 1325 } 1326 tty_flip_buffer_push(&port->port); 1327 } 1328 1329 /* Resubmit urb so we continue receiving */ 1330 err = usb_submit_urb(urb, GFP_ATOMIC); 1331 if (err != 0) 1332 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 1333 } 1334 1335 1336 static void usa90_instat_callback(struct urb *urb) 1337 { 1338 unsigned char *data = urb->transfer_buffer; 1339 struct keyspan_usa90_portStatusMessage *msg; 1340 struct usb_serial *serial; 1341 struct usb_serial_port *port; 1342 struct keyspan_port_private *p_priv; 1343 int old_dcd_state, err; 1344 int status = urb->status; 1345 1346 serial = urb->context; 1347 1348 if (status) { 1349 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n", 1350 __func__, status); 1351 return; 1352 } 1353 if (urb->actual_length < 14) { 1354 dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length); 1355 goto exit; 1356 } 1357 1358 msg = (struct keyspan_usa90_portStatusMessage *)data; 1359 1360 /* Now do something useful with the data */ 1361 1362 port = serial->port[0]; 1363 p_priv = usb_get_serial_port_data(port); 1364 if (!p_priv) 1365 goto resubmit; 1366 1367 /* Update handshaking pin state information */ 1368 old_dcd_state = p_priv->dcd_state; 1369 p_priv->cts_state = ((msg->cts) ? 1 : 0); 1370 p_priv->dsr_state = ((msg->dsr) ? 1 : 0); 1371 p_priv->dcd_state = ((msg->dcd) ? 1 : 0); 1372 p_priv->ri_state = ((msg->ri) ? 1 : 0); 1373 1374 if (old_dcd_state != p_priv->dcd_state && old_dcd_state) 1375 tty_port_tty_hangup(&port->port, true); 1376 resubmit: 1377 /* Resubmit urb so we continue receiving */ 1378 err = usb_submit_urb(urb, GFP_ATOMIC); 1379 if (err != 0) 1380 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 1381 exit: 1382 ; 1383 } 1384 1385 static void usa90_outcont_callback(struct urb *urb) 1386 { 1387 struct usb_serial_port *port; 1388 struct keyspan_port_private *p_priv; 1389 1390 port = urb->context; 1391 p_priv = usb_get_serial_port_data(port); 1392 1393 if (p_priv->resend_cont) { 1394 dev_dbg(&urb->dev->dev, "%s - sending setup\n", __func__); 1395 keyspan_usa90_send_setup(port->serial, port, 1396 p_priv->resend_cont - 1); 1397 } 1398 } 1399 1400 /* Status messages from the 28xg */ 1401 static void usa67_instat_callback(struct urb *urb) 1402 { 1403 int err; 1404 unsigned char *data = urb->transfer_buffer; 1405 struct keyspan_usa67_portStatusMessage *msg; 1406 struct usb_serial *serial; 1407 struct usb_serial_port *port; 1408 struct keyspan_port_private *p_priv; 1409 int old_dcd_state; 1410 int status = urb->status; 1411 1412 serial = urb->context; 1413 1414 if (status) { 1415 dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n", 1416 __func__, status); 1417 return; 1418 } 1419 1420 if (urb->actual_length != 1421 sizeof(struct keyspan_usa67_portStatusMessage)) { 1422 dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); 1423 return; 1424 } 1425 1426 1427 /* Now do something useful with the data */ 1428 msg = (struct keyspan_usa67_portStatusMessage *)data; 1429 1430 /* Check port number from message and retrieve private data */ 1431 if (msg->port >= serial->num_ports) { 1432 dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); 1433 return; 1434 } 1435 1436 port = serial->port[msg->port]; 1437 p_priv = usb_get_serial_port_data(port); 1438 if (!p_priv) 1439 goto resubmit; 1440 1441 /* Update handshaking pin state information */ 1442 old_dcd_state = p_priv->dcd_state; 1443 p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0); 1444 p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0); 1445 1446 if (old_dcd_state != p_priv->dcd_state && old_dcd_state) 1447 tty_port_tty_hangup(&port->port, true); 1448 resubmit: 1449 /* Resubmit urb so we continue receiving */ 1450 err = usb_submit_urb(urb, GFP_ATOMIC); 1451 if (err != 0) 1452 dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); 1453 } 1454 1455 static void usa67_glocont_callback(struct urb *urb) 1456 { 1457 struct usb_serial *serial; 1458 struct usb_serial_port *port; 1459 struct keyspan_port_private *p_priv; 1460 int i; 1461 1462 serial = urb->context; 1463 for (i = 0; i < serial->num_ports; ++i) { 1464 port = serial->port[i]; 1465 p_priv = usb_get_serial_port_data(port); 1466 1467 if (p_priv->resend_cont) { 1468 dev_dbg(&port->dev, "%s - sending setup\n", __func__); 1469 keyspan_usa67_send_setup(serial, port, 1470 p_priv->resend_cont - 1); 1471 break; 1472 } 1473 } 1474 } 1475 1476 static int keyspan_write_room(struct tty_struct *tty) 1477 { 1478 struct usb_serial_port *port = tty->driver_data; 1479 struct keyspan_port_private *p_priv; 1480 const struct keyspan_device_details *d_details; 1481 int flip; 1482 int data_len; 1483 struct urb *this_urb; 1484 1485 p_priv = usb_get_serial_port_data(port); 1486 d_details = p_priv->device_details; 1487 1488 /* FIXME: locking */ 1489 if (d_details->msg_format == msg_usa90) 1490 data_len = 64; 1491 else 1492 data_len = 63; 1493 1494 flip = p_priv->out_flip; 1495 1496 /* Check both endpoints to see if any are available. */ 1497 this_urb = p_priv->out_urbs[flip]; 1498 if (this_urb != NULL) { 1499 if (this_urb->status != -EINPROGRESS) 1500 return data_len; 1501 flip = (flip + 1) & d_details->outdat_endp_flip; 1502 this_urb = p_priv->out_urbs[flip]; 1503 if (this_urb != NULL) { 1504 if (this_urb->status != -EINPROGRESS) 1505 return data_len; 1506 } 1507 } 1508 return 0; 1509 } 1510 1511 1512 static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port) 1513 { 1514 struct keyspan_port_private *p_priv; 1515 const struct keyspan_device_details *d_details; 1516 int i, err; 1517 int baud_rate, device_port; 1518 struct urb *urb; 1519 unsigned int cflag = 0; 1520 1521 p_priv = usb_get_serial_port_data(port); 1522 d_details = p_priv->device_details; 1523 1524 /* Set some sane defaults */ 1525 p_priv->rts_state = 1; 1526 p_priv->dtr_state = 1; 1527 p_priv->baud = 9600; 1528 1529 /* force baud and lcr to be set on open */ 1530 p_priv->old_baud = 0; 1531 p_priv->old_cflag = 0; 1532 1533 p_priv->out_flip = 0; 1534 p_priv->in_flip = 0; 1535 1536 /* Reset low level data toggle and start reading from endpoints */ 1537 for (i = 0; i < 2; i++) { 1538 urb = p_priv->in_urbs[i]; 1539 if (urb == NULL) 1540 continue; 1541 1542 /* make sure endpoint data toggle is synchronized 1543 with the device */ 1544 usb_clear_halt(urb->dev, urb->pipe); 1545 err = usb_submit_urb(urb, GFP_KERNEL); 1546 if (err != 0) 1547 dev_dbg(&port->dev, "%s - submit urb %d failed (%d)\n", __func__, i, err); 1548 } 1549 1550 /* Reset low level data toggle on out endpoints */ 1551 for (i = 0; i < 2; i++) { 1552 urb = p_priv->out_urbs[i]; 1553 if (urb == NULL) 1554 continue; 1555 /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), 1556 usb_pipeout(urb->pipe), 0); */ 1557 } 1558 1559 /* get the terminal config for the setup message now so we don't 1560 * need to send 2 of them */ 1561 1562 device_port = port->port_number; 1563 if (tty) { 1564 cflag = tty->termios.c_cflag; 1565 /* Baud rate calculation takes baud rate as an integer 1566 so other rates can be generated if desired. */ 1567 baud_rate = tty_get_baud_rate(tty); 1568 /* If no match or invalid, leave as default */ 1569 if (baud_rate >= 0 1570 && d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk, 1571 NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { 1572 p_priv->baud = baud_rate; 1573 } 1574 } 1575 /* set CTS/RTS handshake etc. */ 1576 p_priv->cflag = cflag; 1577 p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none; 1578 1579 keyspan_send_setup(port, 1); 1580 /* mdelay(100); */ 1581 /* keyspan_set_termios(port, NULL); */ 1582 1583 return 0; 1584 } 1585 1586 static void keyspan_dtr_rts(struct usb_serial_port *port, int on) 1587 { 1588 struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); 1589 1590 p_priv->rts_state = on; 1591 p_priv->dtr_state = on; 1592 keyspan_send_setup(port, 0); 1593 } 1594 1595 static void keyspan_close(struct usb_serial_port *port) 1596 { 1597 int i; 1598 struct keyspan_port_private *p_priv; 1599 1600 p_priv = usb_get_serial_port_data(port); 1601 1602 p_priv->rts_state = 0; 1603 p_priv->dtr_state = 0; 1604 1605 keyspan_send_setup(port, 2); 1606 /* pilot-xfer seems to work best with this delay */ 1607 mdelay(100); 1608 1609 p_priv->out_flip = 0; 1610 p_priv->in_flip = 0; 1611 1612 usb_kill_urb(p_priv->inack_urb); 1613 for (i = 0; i < 2; i++) { 1614 usb_kill_urb(p_priv->in_urbs[i]); 1615 usb_kill_urb(p_priv->out_urbs[i]); 1616 } 1617 } 1618 1619 /* download the firmware to a pre-renumeration device */ 1620 static int keyspan_fake_startup(struct usb_serial *serial) 1621 { 1622 char *fw_name; 1623 1624 dev_dbg(&serial->dev->dev, "Keyspan startup version %04x product %04x\n", 1625 le16_to_cpu(serial->dev->descriptor.bcdDevice), 1626 le16_to_cpu(serial->dev->descriptor.idProduct)); 1627 1628 if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000) 1629 != 0x8000) { 1630 dev_dbg(&serial->dev->dev, "Firmware already loaded. Quitting.\n"); 1631 return 1; 1632 } 1633 1634 /* Select firmware image on the basis of idProduct */ 1635 switch (le16_to_cpu(serial->dev->descriptor.idProduct)) { 1636 case keyspan_usa28_pre_product_id: 1637 fw_name = "keyspan/usa28.fw"; 1638 break; 1639 1640 case keyspan_usa28x_pre_product_id: 1641 fw_name = "keyspan/usa28x.fw"; 1642 break; 1643 1644 case keyspan_usa28xa_pre_product_id: 1645 fw_name = "keyspan/usa28xa.fw"; 1646 break; 1647 1648 case keyspan_usa28xb_pre_product_id: 1649 fw_name = "keyspan/usa28xb.fw"; 1650 break; 1651 1652 case keyspan_usa19_pre_product_id: 1653 fw_name = "keyspan/usa19.fw"; 1654 break; 1655 1656 case keyspan_usa19qi_pre_product_id: 1657 fw_name = "keyspan/usa19qi.fw"; 1658 break; 1659 1660 case keyspan_mpr_pre_product_id: 1661 fw_name = "keyspan/mpr.fw"; 1662 break; 1663 1664 case keyspan_usa19qw_pre_product_id: 1665 fw_name = "keyspan/usa19qw.fw"; 1666 break; 1667 1668 case keyspan_usa18x_pre_product_id: 1669 fw_name = "keyspan/usa18x.fw"; 1670 break; 1671 1672 case keyspan_usa19w_pre_product_id: 1673 fw_name = "keyspan/usa19w.fw"; 1674 break; 1675 1676 case keyspan_usa49w_pre_product_id: 1677 fw_name = "keyspan/usa49w.fw"; 1678 break; 1679 1680 case keyspan_usa49wlc_pre_product_id: 1681 fw_name = "keyspan/usa49wlc.fw"; 1682 break; 1683 1684 default: 1685 dev_err(&serial->dev->dev, "Unknown product ID (%04x)\n", 1686 le16_to_cpu(serial->dev->descriptor.idProduct)); 1687 return 1; 1688 } 1689 1690 dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name); 1691 1692 if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) { 1693 dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n", 1694 fw_name); 1695 return -ENOENT; 1696 } 1697 1698 /* after downloading firmware Renumeration will occur in a 1699 moment and the new device will bind to the real driver */ 1700 1701 /* we don't want this device to have a driver assigned to it. */ 1702 return 1; 1703 } 1704 1705 /* Helper functions used by keyspan_setup_urbs */ 1706 static struct usb_endpoint_descriptor const *find_ep(struct usb_serial const *serial, 1707 int endpoint) 1708 { 1709 struct usb_host_interface *iface_desc; 1710 struct usb_endpoint_descriptor *ep; 1711 int i; 1712 1713 iface_desc = serial->interface->cur_altsetting; 1714 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { 1715 ep = &iface_desc->endpoint[i].desc; 1716 if (ep->bEndpointAddress == endpoint) 1717 return ep; 1718 } 1719 dev_warn(&serial->interface->dev, "found no endpoint descriptor for endpoint %x\n", 1720 endpoint); 1721 return NULL; 1722 } 1723 1724 static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint, 1725 int dir, void *ctx, char *buf, int len, 1726 void (*callback)(struct urb *)) 1727 { 1728 struct urb *urb; 1729 struct usb_endpoint_descriptor const *ep_desc; 1730 char const *ep_type_name; 1731 1732 if (endpoint == -1) 1733 return NULL; /* endpoint not needed */ 1734 1735 dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %x\n", 1736 __func__, endpoint); 1737 urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ 1738 if (!urb) 1739 return NULL; 1740 1741 if (endpoint == 0) { 1742 /* control EP filled in when used */ 1743 return urb; 1744 } 1745 1746 ep_desc = find_ep(serial, endpoint); 1747 if (!ep_desc) { 1748 /* leak the urb, something's wrong and the callers don't care */ 1749 return urb; 1750 } 1751 if (usb_endpoint_xfer_int(ep_desc)) { 1752 ep_type_name = "INT"; 1753 usb_fill_int_urb(urb, serial->dev, 1754 usb_sndintpipe(serial->dev, endpoint) | dir, 1755 buf, len, callback, ctx, 1756 ep_desc->bInterval); 1757 } else if (usb_endpoint_xfer_bulk(ep_desc)) { 1758 ep_type_name = "BULK"; 1759 usb_fill_bulk_urb(urb, serial->dev, 1760 usb_sndbulkpipe(serial->dev, endpoint) | dir, 1761 buf, len, callback, ctx); 1762 } else { 1763 dev_warn(&serial->interface->dev, 1764 "unsupported endpoint type %x\n", 1765 usb_endpoint_type(ep_desc)); 1766 usb_free_urb(urb); 1767 return NULL; 1768 } 1769 1770 dev_dbg(&serial->interface->dev, "%s - using urb %p for %s endpoint %x\n", 1771 __func__, urb, ep_type_name, endpoint); 1772 return urb; 1773 } 1774 1775 static struct callbacks { 1776 void (*instat_callback)(struct urb *); 1777 void (*glocont_callback)(struct urb *); 1778 void (*indat_callback)(struct urb *); 1779 void (*outdat_callback)(struct urb *); 1780 void (*inack_callback)(struct urb *); 1781 void (*outcont_callback)(struct urb *); 1782 } keyspan_callbacks[] = { 1783 { 1784 /* msg_usa26 callbacks */ 1785 .instat_callback = usa26_instat_callback, 1786 .glocont_callback = usa26_glocont_callback, 1787 .indat_callback = usa26_indat_callback, 1788 .outdat_callback = usa2x_outdat_callback, 1789 .inack_callback = usa26_inack_callback, 1790 .outcont_callback = usa26_outcont_callback, 1791 }, { 1792 /* msg_usa28 callbacks */ 1793 .instat_callback = usa28_instat_callback, 1794 .glocont_callback = usa28_glocont_callback, 1795 .indat_callback = usa28_indat_callback, 1796 .outdat_callback = usa2x_outdat_callback, 1797 .inack_callback = usa28_inack_callback, 1798 .outcont_callback = usa28_outcont_callback, 1799 }, { 1800 /* msg_usa49 callbacks */ 1801 .instat_callback = usa49_instat_callback, 1802 .glocont_callback = usa49_glocont_callback, 1803 .indat_callback = usa49_indat_callback, 1804 .outdat_callback = usa2x_outdat_callback, 1805 .inack_callback = usa49_inack_callback, 1806 .outcont_callback = usa49_outcont_callback, 1807 }, { 1808 /* msg_usa90 callbacks */ 1809 .instat_callback = usa90_instat_callback, 1810 .glocont_callback = usa28_glocont_callback, 1811 .indat_callback = usa90_indat_callback, 1812 .outdat_callback = usa2x_outdat_callback, 1813 .inack_callback = usa28_inack_callback, 1814 .outcont_callback = usa90_outcont_callback, 1815 }, { 1816 /* msg_usa67 callbacks */ 1817 .instat_callback = usa67_instat_callback, 1818 .glocont_callback = usa67_glocont_callback, 1819 .indat_callback = usa26_indat_callback, 1820 .outdat_callback = usa2x_outdat_callback, 1821 .inack_callback = usa26_inack_callback, 1822 .outcont_callback = usa26_outcont_callback, 1823 } 1824 }; 1825 1826 /* Generic setup urbs function that uses 1827 data in device_details */ 1828 static void keyspan_setup_urbs(struct usb_serial *serial) 1829 { 1830 struct keyspan_serial_private *s_priv; 1831 const struct keyspan_device_details *d_details; 1832 struct callbacks *cback; 1833 1834 s_priv = usb_get_serial_data(serial); 1835 d_details = s_priv->device_details; 1836 1837 /* Setup values for the various callback routines */ 1838 cback = &keyspan_callbacks[d_details->msg_format]; 1839 1840 /* Allocate and set up urbs for each one that is in use, 1841 starting with instat endpoints */ 1842 s_priv->instat_urb = keyspan_setup_urb 1843 (serial, d_details->instat_endpoint, USB_DIR_IN, 1844 serial, s_priv->instat_buf, INSTAT_BUFLEN, 1845 cback->instat_callback); 1846 1847 s_priv->indat_urb = keyspan_setup_urb 1848 (serial, d_details->indat_endpoint, USB_DIR_IN, 1849 serial, s_priv->indat_buf, INDAT49W_BUFLEN, 1850 usa49wg_indat_callback); 1851 1852 s_priv->glocont_urb = keyspan_setup_urb 1853 (serial, d_details->glocont_endpoint, USB_DIR_OUT, 1854 serial, s_priv->glocont_buf, GLOCONT_BUFLEN, 1855 cback->glocont_callback); 1856 } 1857 1858 /* usa19 function doesn't require prescaler */ 1859 static int keyspan_usa19_calc_baud(struct usb_serial_port *port, 1860 u32 baud_rate, u32 baudclk, u8 *rate_hi, 1861 u8 *rate_low, u8 *prescaler, int portnum) 1862 { 1863 u32 b16, /* baud rate times 16 (actual rate used internally) */ 1864 div, /* divisor */ 1865 cnt; /* inverse of divisor (programmed into 8051) */ 1866 1867 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); 1868 1869 /* prevent divide by zero... */ 1870 b16 = baud_rate * 16L; 1871 if (b16 == 0) 1872 return KEYSPAN_INVALID_BAUD_RATE; 1873 /* Any "standard" rate over 57k6 is marginal on the USA-19 1874 as we run out of divisor resolution. */ 1875 if (baud_rate > 57600) 1876 return KEYSPAN_INVALID_BAUD_RATE; 1877 1878 /* calculate the divisor and the counter (its inverse) */ 1879 div = baudclk / b16; 1880 if (div == 0) 1881 return KEYSPAN_INVALID_BAUD_RATE; 1882 else 1883 cnt = 0 - div; 1884 1885 if (div > 0xffff) 1886 return KEYSPAN_INVALID_BAUD_RATE; 1887 1888 /* return the counter values if non-null */ 1889 if (rate_low) 1890 *rate_low = (u8) (cnt & 0xff); 1891 if (rate_hi) 1892 *rate_hi = (u8) ((cnt >> 8) & 0xff); 1893 if (rate_low && rate_hi) 1894 dev_dbg(&port->dev, "%s - %d %02x %02x.\n", 1895 __func__, baud_rate, *rate_hi, *rate_low); 1896 return KEYSPAN_BAUD_RATE_OK; 1897 } 1898 1899 /* usa19hs function doesn't require prescaler */ 1900 static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port, 1901 u32 baud_rate, u32 baudclk, u8 *rate_hi, 1902 u8 *rate_low, u8 *prescaler, int portnum) 1903 { 1904 u32 b16, /* baud rate times 16 (actual rate used internally) */ 1905 div; /* divisor */ 1906 1907 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); 1908 1909 /* prevent divide by zero... */ 1910 b16 = baud_rate * 16L; 1911 if (b16 == 0) 1912 return KEYSPAN_INVALID_BAUD_RATE; 1913 1914 /* calculate the divisor */ 1915 div = baudclk / b16; 1916 if (div == 0) 1917 return KEYSPAN_INVALID_BAUD_RATE; 1918 1919 if (div > 0xffff) 1920 return KEYSPAN_INVALID_BAUD_RATE; 1921 1922 /* return the counter values if non-null */ 1923 if (rate_low) 1924 *rate_low = (u8) (div & 0xff); 1925 1926 if (rate_hi) 1927 *rate_hi = (u8) ((div >> 8) & 0xff); 1928 1929 if (rate_low && rate_hi) 1930 dev_dbg(&port->dev, "%s - %d %02x %02x.\n", 1931 __func__, baud_rate, *rate_hi, *rate_low); 1932 1933 return KEYSPAN_BAUD_RATE_OK; 1934 } 1935 1936 static int keyspan_usa19w_calc_baud(struct usb_serial_port *port, 1937 u32 baud_rate, u32 baudclk, u8 *rate_hi, 1938 u8 *rate_low, u8 *prescaler, int portnum) 1939 { 1940 u32 b16, /* baud rate times 16 (actual rate used internally) */ 1941 clk, /* clock with 13/8 prescaler */ 1942 div, /* divisor using 13/8 prescaler */ 1943 res, /* resulting baud rate using 13/8 prescaler */ 1944 diff, /* error using 13/8 prescaler */ 1945 smallest_diff; 1946 u8 best_prescaler; 1947 int i; 1948 1949 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); 1950 1951 /* prevent divide by zero */ 1952 b16 = baud_rate * 16L; 1953 if (b16 == 0) 1954 return KEYSPAN_INVALID_BAUD_RATE; 1955 1956 /* Calculate prescaler by trying them all and looking 1957 for best fit */ 1958 1959 /* start with largest possible difference */ 1960 smallest_diff = 0xffffffff; 1961 1962 /* 0 is an invalid prescaler, used as a flag */ 1963 best_prescaler = 0; 1964 1965 for (i = 8; i <= 0xff; ++i) { 1966 clk = (baudclk * 8) / (u32) i; 1967 1968 div = clk / b16; 1969 if (div == 0) 1970 continue; 1971 1972 res = clk / div; 1973 diff = (res > b16) ? (res-b16) : (b16-res); 1974 1975 if (diff < smallest_diff) { 1976 best_prescaler = i; 1977 smallest_diff = diff; 1978 } 1979 } 1980 1981 if (best_prescaler == 0) 1982 return KEYSPAN_INVALID_BAUD_RATE; 1983 1984 clk = (baudclk * 8) / (u32) best_prescaler; 1985 div = clk / b16; 1986 1987 /* return the divisor and prescaler if non-null */ 1988 if (rate_low) 1989 *rate_low = (u8) (div & 0xff); 1990 if (rate_hi) 1991 *rate_hi = (u8) ((div >> 8) & 0xff); 1992 if (prescaler) { 1993 *prescaler = best_prescaler; 1994 /* dev_dbg(&port->dev, "%s - %d %d\n", __func__, *prescaler, div); */ 1995 } 1996 return KEYSPAN_BAUD_RATE_OK; 1997 } 1998 1999 /* USA-28 supports different maximum baud rates on each port */ 2000 static int keyspan_usa28_calc_baud(struct usb_serial_port *port, 2001 u32 baud_rate, u32 baudclk, u8 *rate_hi, 2002 u8 *rate_low, u8 *prescaler, int portnum) 2003 { 2004 u32 b16, /* baud rate times 16 (actual rate used internally) */ 2005 div, /* divisor */ 2006 cnt; /* inverse of divisor (programmed into 8051) */ 2007 2008 dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); 2009 2010 /* prevent divide by zero */ 2011 b16 = baud_rate * 16L; 2012 if (b16 == 0) 2013 return KEYSPAN_INVALID_BAUD_RATE; 2014 2015 /* calculate the divisor and the counter (its inverse) */ 2016 div = KEYSPAN_USA28_BAUDCLK / b16; 2017 if (div == 0) 2018 return KEYSPAN_INVALID_BAUD_RATE; 2019 else 2020 cnt = 0 - div; 2021 2022 /* check for out of range, based on portnum, 2023 and return result */ 2024 if (portnum == 0) { 2025 if (div > 0xffff) 2026 return KEYSPAN_INVALID_BAUD_RATE; 2027 } else { 2028 if (portnum == 1) { 2029 if (div > 0xff) 2030 return KEYSPAN_INVALID_BAUD_RATE; 2031 } else 2032 return KEYSPAN_INVALID_BAUD_RATE; 2033 } 2034 2035 /* return the counter values if not NULL 2036 (port 1 will ignore retHi) */ 2037 if (rate_low) 2038 *rate_low = (u8) (cnt & 0xff); 2039 if (rate_hi) 2040 *rate_hi = (u8) ((cnt >> 8) & 0xff); 2041 dev_dbg(&port->dev, "%s - %d OK.\n", __func__, baud_rate); 2042 return KEYSPAN_BAUD_RATE_OK; 2043 } 2044 2045 static int keyspan_usa26_send_setup(struct usb_serial *serial, 2046 struct usb_serial_port *port, 2047 int reset_port) 2048 { 2049 struct keyspan_usa26_portControlMessage msg; 2050 struct keyspan_serial_private *s_priv; 2051 struct keyspan_port_private *p_priv; 2052 const struct keyspan_device_details *d_details; 2053 struct urb *this_urb; 2054 int device_port, err; 2055 2056 dev_dbg(&port->dev, "%s reset=%d\n", __func__, reset_port); 2057 2058 s_priv = usb_get_serial_data(serial); 2059 p_priv = usb_get_serial_port_data(port); 2060 d_details = s_priv->device_details; 2061 device_port = port->port_number; 2062 2063 this_urb = p_priv->outcont_urb; 2064 2065 /* Make sure we have an urb then send the message */ 2066 if (this_urb == NULL) { 2067 dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); 2068 return -1; 2069 } 2070 2071 dev_dbg(&port->dev, "%s - endpoint %x\n", 2072 __func__, usb_pipeendpoint(this_urb->pipe)); 2073 2074 /* Save reset port val for resend. 2075 Don't overwrite resend for open/close condition. */ 2076 if ((reset_port + 1) > p_priv->resend_cont) 2077 p_priv->resend_cont = reset_port + 1; 2078 if (this_urb->status == -EINPROGRESS) { 2079 /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ 2080 mdelay(5); 2081 return -1; 2082 } 2083 2084 memset(&msg, 0, sizeof(struct keyspan_usa26_portControlMessage)); 2085 2086 /* Only set baud rate if it's changed */ 2087 if (p_priv->old_baud != p_priv->baud) { 2088 p_priv->old_baud = p_priv->baud; 2089 msg.setClocking = 0xff; 2090 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, 2091 &msg.baudHi, &msg.baudLo, &msg.prescaler, 2092 device_port) == KEYSPAN_INVALID_BAUD_RATE) { 2093 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", 2094 __func__, p_priv->baud); 2095 msg.baudLo = 0; 2096 msg.baudHi = 125; /* Values for 9600 baud */ 2097 msg.prescaler = 10; 2098 } 2099 msg.setPrescaler = 0xff; 2100 } 2101 2102 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; 2103 switch (p_priv->cflag & CSIZE) { 2104 case CS5: 2105 msg.lcr |= USA_DATABITS_5; 2106 break; 2107 case CS6: 2108 msg.lcr |= USA_DATABITS_6; 2109 break; 2110 case CS7: 2111 msg.lcr |= USA_DATABITS_7; 2112 break; 2113 case CS8: 2114 msg.lcr |= USA_DATABITS_8; 2115 break; 2116 } 2117 if (p_priv->cflag & PARENB) { 2118 /* note USA_PARITY_NONE == 0 */ 2119 msg.lcr |= (p_priv->cflag & PARODD) ? 2120 USA_PARITY_ODD : USA_PARITY_EVEN; 2121 } 2122 msg.setLcr = 0xff; 2123 2124 msg.ctsFlowControl = (p_priv->flow_control == flow_cts); 2125 msg.xonFlowControl = 0; 2126 msg.setFlowControl = 0xff; 2127 msg.forwardingLength = 16; 2128 msg.xonChar = 17; 2129 msg.xoffChar = 19; 2130 2131 /* Opening port */ 2132 if (reset_port == 1) { 2133 msg._txOn = 1; 2134 msg._txOff = 0; 2135 msg.txFlush = 0; 2136 msg.txBreak = 0; 2137 msg.rxOn = 1; 2138 msg.rxOff = 0; 2139 msg.rxFlush = 1; 2140 msg.rxForward = 0; 2141 msg.returnStatus = 0; 2142 msg.resetDataToggle = 0xff; 2143 } 2144 2145 /* Closing port */ 2146 else if (reset_port == 2) { 2147 msg._txOn = 0; 2148 msg._txOff = 1; 2149 msg.txFlush = 0; 2150 msg.txBreak = 0; 2151 msg.rxOn = 0; 2152 msg.rxOff = 1; 2153 msg.rxFlush = 1; 2154 msg.rxForward = 0; 2155 msg.returnStatus = 0; 2156 msg.resetDataToggle = 0; 2157 } 2158 2159 /* Sending intermediate configs */ 2160 else { 2161 msg._txOn = (!p_priv->break_on); 2162 msg._txOff = 0; 2163 msg.txFlush = 0; 2164 msg.txBreak = (p_priv->break_on); 2165 msg.rxOn = 0; 2166 msg.rxOff = 0; 2167 msg.rxFlush = 0; 2168 msg.rxForward = 0; 2169 msg.returnStatus = 0; 2170 msg.resetDataToggle = 0x0; 2171 } 2172 2173 /* Do handshaking outputs */ 2174 msg.setTxTriState_setRts = 0xff; 2175 msg.txTriState_rts = p_priv->rts_state; 2176 2177 msg.setHskoa_setDtr = 0xff; 2178 msg.hskoa_dtr = p_priv->dtr_state; 2179 2180 p_priv->resend_cont = 0; 2181 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); 2182 2183 /* send the data out the device on control endpoint */ 2184 this_urb->transfer_buffer_length = sizeof(msg); 2185 2186 err = usb_submit_urb(this_urb, GFP_ATOMIC); 2187 if (err != 0) 2188 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); 2189 return 0; 2190 } 2191 2192 static int keyspan_usa28_send_setup(struct usb_serial *serial, 2193 struct usb_serial_port *port, 2194 int reset_port) 2195 { 2196 struct keyspan_usa28_portControlMessage msg; 2197 struct keyspan_serial_private *s_priv; 2198 struct keyspan_port_private *p_priv; 2199 const struct keyspan_device_details *d_details; 2200 struct urb *this_urb; 2201 int device_port, err; 2202 2203 s_priv = usb_get_serial_data(serial); 2204 p_priv = usb_get_serial_port_data(port); 2205 d_details = s_priv->device_details; 2206 device_port = port->port_number; 2207 2208 /* only do something if we have a bulk out endpoint */ 2209 this_urb = p_priv->outcont_urb; 2210 if (this_urb == NULL) { 2211 dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); 2212 return -1; 2213 } 2214 2215 /* Save reset port val for resend. 2216 Don't overwrite resend for open/close condition. */ 2217 if ((reset_port + 1) > p_priv->resend_cont) 2218 p_priv->resend_cont = reset_port + 1; 2219 if (this_urb->status == -EINPROGRESS) { 2220 dev_dbg(&port->dev, "%s already writing\n", __func__); 2221 mdelay(5); 2222 return -1; 2223 } 2224 2225 memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage)); 2226 2227 msg.setBaudRate = 1; 2228 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, 2229 &msg.baudHi, &msg.baudLo, NULL, 2230 device_port) == KEYSPAN_INVALID_BAUD_RATE) { 2231 dev_dbg(&port->dev, "%s - Invalid baud rate requested %d.\n", 2232 __func__, p_priv->baud); 2233 msg.baudLo = 0xff; 2234 msg.baudHi = 0xb2; /* Values for 9600 baud */ 2235 } 2236 2237 /* If parity is enabled, we must calculate it ourselves. */ 2238 msg.parity = 0; /* XXX for now */ 2239 2240 msg.ctsFlowControl = (p_priv->flow_control == flow_cts); 2241 msg.xonFlowControl = 0; 2242 2243 /* Do handshaking outputs, DTR is inverted relative to RTS */ 2244 msg.rts = p_priv->rts_state; 2245 msg.dtr = p_priv->dtr_state; 2246 2247 msg.forwardingLength = 16; 2248 msg.forwardMs = 10; 2249 msg.breakThreshold = 45; 2250 msg.xonChar = 17; 2251 msg.xoffChar = 19; 2252 2253 /*msg.returnStatus = 1; 2254 msg.resetDataToggle = 0xff;*/ 2255 /* Opening port */ 2256 if (reset_port == 1) { 2257 msg._txOn = 1; 2258 msg._txOff = 0; 2259 msg.txFlush = 0; 2260 msg.txForceXoff = 0; 2261 msg.txBreak = 0; 2262 msg.rxOn = 1; 2263 msg.rxOff = 0; 2264 msg.rxFlush = 1; 2265 msg.rxForward = 0; 2266 msg.returnStatus = 0; 2267 msg.resetDataToggle = 0xff; 2268 } 2269 /* Closing port */ 2270 else if (reset_port == 2) { 2271 msg._txOn = 0; 2272 msg._txOff = 1; 2273 msg.txFlush = 0; 2274 msg.txForceXoff = 0; 2275 msg.txBreak = 0; 2276 msg.rxOn = 0; 2277 msg.rxOff = 1; 2278 msg.rxFlush = 1; 2279 msg.rxForward = 0; 2280 msg.returnStatus = 0; 2281 msg.resetDataToggle = 0; 2282 } 2283 /* Sending intermediate configs */ 2284 else { 2285 msg._txOn = (!p_priv->break_on); 2286 msg._txOff = 0; 2287 msg.txFlush = 0; 2288 msg.txForceXoff = 0; 2289 msg.txBreak = (p_priv->break_on); 2290 msg.rxOn = 0; 2291 msg.rxOff = 0; 2292 msg.rxFlush = 0; 2293 msg.rxForward = 0; 2294 msg.returnStatus = 0; 2295 msg.resetDataToggle = 0x0; 2296 } 2297 2298 p_priv->resend_cont = 0; 2299 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); 2300 2301 /* send the data out the device on control endpoint */ 2302 this_urb->transfer_buffer_length = sizeof(msg); 2303 2304 err = usb_submit_urb(this_urb, GFP_ATOMIC); 2305 if (err != 0) 2306 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__); 2307 2308 return 0; 2309 } 2310 2311 static int keyspan_usa49_send_setup(struct usb_serial *serial, 2312 struct usb_serial_port *port, 2313 int reset_port) 2314 { 2315 struct keyspan_usa49_portControlMessage msg; 2316 struct usb_ctrlrequest *dr = NULL; 2317 struct keyspan_serial_private *s_priv; 2318 struct keyspan_port_private *p_priv; 2319 const struct keyspan_device_details *d_details; 2320 struct urb *this_urb; 2321 int err, device_port; 2322 2323 s_priv = usb_get_serial_data(serial); 2324 p_priv = usb_get_serial_port_data(port); 2325 d_details = s_priv->device_details; 2326 2327 this_urb = s_priv->glocont_urb; 2328 2329 /* Work out which port within the device is being setup */ 2330 device_port = port->port_number; 2331 2332 /* Make sure we have an urb then send the message */ 2333 if (this_urb == NULL) { 2334 dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__); 2335 return -1; 2336 } 2337 2338 dev_dbg(&port->dev, "%s - endpoint %x (%d)\n", 2339 __func__, usb_pipeendpoint(this_urb->pipe), device_port); 2340 2341 /* Save reset port val for resend. 2342 Don't overwrite resend for open/close condition. */ 2343 if ((reset_port + 1) > p_priv->resend_cont) 2344 p_priv->resend_cont = reset_port + 1; 2345 2346 if (this_urb->status == -EINPROGRESS) { 2347 /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ 2348 mdelay(5); 2349 return -1; 2350 } 2351 2352 memset(&msg, 0, sizeof(struct keyspan_usa49_portControlMessage)); 2353 2354 msg.portNumber = device_port; 2355 2356 /* Only set baud rate if it's changed */ 2357 if (p_priv->old_baud != p_priv->baud) { 2358 p_priv->old_baud = p_priv->baud; 2359 msg.setClocking = 0xff; 2360 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, 2361 &msg.baudHi, &msg.baudLo, &msg.prescaler, 2362 device_port) == KEYSPAN_INVALID_BAUD_RATE) { 2363 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", 2364 __func__, p_priv->baud); 2365 msg.baudLo = 0; 2366 msg.baudHi = 125; /* Values for 9600 baud */ 2367 msg.prescaler = 10; 2368 } 2369 /* msg.setPrescaler = 0xff; */ 2370 } 2371 2372 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; 2373 switch (p_priv->cflag & CSIZE) { 2374 case CS5: 2375 msg.lcr |= USA_DATABITS_5; 2376 break; 2377 case CS6: 2378 msg.lcr |= USA_DATABITS_6; 2379 break; 2380 case CS7: 2381 msg.lcr |= USA_DATABITS_7; 2382 break; 2383 case CS8: 2384 msg.lcr |= USA_DATABITS_8; 2385 break; 2386 } 2387 if (p_priv->cflag & PARENB) { 2388 /* note USA_PARITY_NONE == 0 */ 2389 msg.lcr |= (p_priv->cflag & PARODD) ? 2390 USA_PARITY_ODD : USA_PARITY_EVEN; 2391 } 2392 msg.setLcr = 0xff; 2393 2394 msg.ctsFlowControl = (p_priv->flow_control == flow_cts); 2395 msg.xonFlowControl = 0; 2396 msg.setFlowControl = 0xff; 2397 2398 msg.forwardingLength = 16; 2399 msg.xonChar = 17; 2400 msg.xoffChar = 19; 2401 2402 /* Opening port */ 2403 if (reset_port == 1) { 2404 msg._txOn = 1; 2405 msg._txOff = 0; 2406 msg.txFlush = 0; 2407 msg.txBreak = 0; 2408 msg.rxOn = 1; 2409 msg.rxOff = 0; 2410 msg.rxFlush = 1; 2411 msg.rxForward = 0; 2412 msg.returnStatus = 0; 2413 msg.resetDataToggle = 0xff; 2414 msg.enablePort = 1; 2415 msg.disablePort = 0; 2416 } 2417 /* Closing port */ 2418 else if (reset_port == 2) { 2419 msg._txOn = 0; 2420 msg._txOff = 1; 2421 msg.txFlush = 0; 2422 msg.txBreak = 0; 2423 msg.rxOn = 0; 2424 msg.rxOff = 1; 2425 msg.rxFlush = 1; 2426 msg.rxForward = 0; 2427 msg.returnStatus = 0; 2428 msg.resetDataToggle = 0; 2429 msg.enablePort = 0; 2430 msg.disablePort = 1; 2431 } 2432 /* Sending intermediate configs */ 2433 else { 2434 msg._txOn = (!p_priv->break_on); 2435 msg._txOff = 0; 2436 msg.txFlush = 0; 2437 msg.txBreak = (p_priv->break_on); 2438 msg.rxOn = 0; 2439 msg.rxOff = 0; 2440 msg.rxFlush = 0; 2441 msg.rxForward = 0; 2442 msg.returnStatus = 0; 2443 msg.resetDataToggle = 0x0; 2444 msg.enablePort = 0; 2445 msg.disablePort = 0; 2446 } 2447 2448 /* Do handshaking outputs */ 2449 msg.setRts = 0xff; 2450 msg.rts = p_priv->rts_state; 2451 2452 msg.setDtr = 0xff; 2453 msg.dtr = p_priv->dtr_state; 2454 2455 p_priv->resend_cont = 0; 2456 2457 /* if the device is a 49wg, we send control message on usb 2458 control EP 0 */ 2459 2460 if (d_details->product_id == keyspan_usa49wg_product_id) { 2461 dr = (void *)(s_priv->ctrl_buf); 2462 dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT; 2463 dr->bRequest = 0xB0; /* 49wg control message */ 2464 dr->wValue = 0; 2465 dr->wIndex = 0; 2466 dr->wLength = cpu_to_le16(sizeof(msg)); 2467 2468 memcpy(s_priv->glocont_buf, &msg, sizeof(msg)); 2469 2470 usb_fill_control_urb(this_urb, serial->dev, 2471 usb_sndctrlpipe(serial->dev, 0), 2472 (unsigned char *)dr, s_priv->glocont_buf, 2473 sizeof(msg), usa49_glocont_callback, serial); 2474 2475 } else { 2476 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); 2477 2478 /* send the data out the device on control endpoint */ 2479 this_urb->transfer_buffer_length = sizeof(msg); 2480 } 2481 err = usb_submit_urb(this_urb, GFP_ATOMIC); 2482 if (err != 0) 2483 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); 2484 2485 return 0; 2486 } 2487 2488 static int keyspan_usa90_send_setup(struct usb_serial *serial, 2489 struct usb_serial_port *port, 2490 int reset_port) 2491 { 2492 struct keyspan_usa90_portControlMessage msg; 2493 struct keyspan_serial_private *s_priv; 2494 struct keyspan_port_private *p_priv; 2495 const struct keyspan_device_details *d_details; 2496 struct urb *this_urb; 2497 int err; 2498 u8 prescaler; 2499 2500 s_priv = usb_get_serial_data(serial); 2501 p_priv = usb_get_serial_port_data(port); 2502 d_details = s_priv->device_details; 2503 2504 /* only do something if we have a bulk out endpoint */ 2505 this_urb = p_priv->outcont_urb; 2506 if (this_urb == NULL) { 2507 dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); 2508 return -1; 2509 } 2510 2511 /* Save reset port val for resend. 2512 Don't overwrite resend for open/close condition. */ 2513 if ((reset_port + 1) > p_priv->resend_cont) 2514 p_priv->resend_cont = reset_port + 1; 2515 if (this_urb->status == -EINPROGRESS) { 2516 dev_dbg(&port->dev, "%s already writing\n", __func__); 2517 mdelay(5); 2518 return -1; 2519 } 2520 2521 memset(&msg, 0, sizeof(struct keyspan_usa90_portControlMessage)); 2522 2523 /* Only set baud rate if it's changed */ 2524 if (p_priv->old_baud != p_priv->baud) { 2525 p_priv->old_baud = p_priv->baud; 2526 msg.setClocking = 0x01; 2527 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, 2528 &msg.baudHi, &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) { 2529 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", 2530 __func__, p_priv->baud); 2531 p_priv->baud = 9600; 2532 d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, 2533 &msg.baudHi, &msg.baudLo, &prescaler, 0); 2534 } 2535 msg.setRxMode = 1; 2536 msg.setTxMode = 1; 2537 } 2538 2539 /* modes must always be correctly specified */ 2540 if (p_priv->baud > 57600) { 2541 msg.rxMode = RXMODE_DMA; 2542 msg.txMode = TXMODE_DMA; 2543 } else { 2544 msg.rxMode = RXMODE_BYHAND; 2545 msg.txMode = TXMODE_BYHAND; 2546 } 2547 2548 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; 2549 switch (p_priv->cflag & CSIZE) { 2550 case CS5: 2551 msg.lcr |= USA_DATABITS_5; 2552 break; 2553 case CS6: 2554 msg.lcr |= USA_DATABITS_6; 2555 break; 2556 case CS7: 2557 msg.lcr |= USA_DATABITS_7; 2558 break; 2559 case CS8: 2560 msg.lcr |= USA_DATABITS_8; 2561 break; 2562 } 2563 if (p_priv->cflag & PARENB) { 2564 /* note USA_PARITY_NONE == 0 */ 2565 msg.lcr |= (p_priv->cflag & PARODD) ? 2566 USA_PARITY_ODD : USA_PARITY_EVEN; 2567 } 2568 if (p_priv->old_cflag != p_priv->cflag) { 2569 p_priv->old_cflag = p_priv->cflag; 2570 msg.setLcr = 0x01; 2571 } 2572 2573 if (p_priv->flow_control == flow_cts) 2574 msg.txFlowControl = TXFLOW_CTS; 2575 msg.setTxFlowControl = 0x01; 2576 msg.setRxFlowControl = 0x01; 2577 2578 msg.rxForwardingLength = 16; 2579 msg.rxForwardingTimeout = 16; 2580 msg.txAckSetting = 0; 2581 msg.xonChar = 17; 2582 msg.xoffChar = 19; 2583 2584 /* Opening port */ 2585 if (reset_port == 1) { 2586 msg.portEnabled = 1; 2587 msg.rxFlush = 1; 2588 msg.txBreak = (p_priv->break_on); 2589 } 2590 /* Closing port */ 2591 else if (reset_port == 2) 2592 msg.portEnabled = 0; 2593 /* Sending intermediate configs */ 2594 else { 2595 msg.portEnabled = 1; 2596 msg.txBreak = (p_priv->break_on); 2597 } 2598 2599 /* Do handshaking outputs */ 2600 msg.setRts = 0x01; 2601 msg.rts = p_priv->rts_state; 2602 2603 msg.setDtr = 0x01; 2604 msg.dtr = p_priv->dtr_state; 2605 2606 p_priv->resend_cont = 0; 2607 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); 2608 2609 /* send the data out the device on control endpoint */ 2610 this_urb->transfer_buffer_length = sizeof(msg); 2611 2612 err = usb_submit_urb(this_urb, GFP_ATOMIC); 2613 if (err != 0) 2614 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); 2615 return 0; 2616 } 2617 2618 static int keyspan_usa67_send_setup(struct usb_serial *serial, 2619 struct usb_serial_port *port, 2620 int reset_port) 2621 { 2622 struct keyspan_usa67_portControlMessage msg; 2623 struct keyspan_serial_private *s_priv; 2624 struct keyspan_port_private *p_priv; 2625 const struct keyspan_device_details *d_details; 2626 struct urb *this_urb; 2627 int err, device_port; 2628 2629 s_priv = usb_get_serial_data(serial); 2630 p_priv = usb_get_serial_port_data(port); 2631 d_details = s_priv->device_details; 2632 2633 this_urb = s_priv->glocont_urb; 2634 2635 /* Work out which port within the device is being setup */ 2636 device_port = port->port_number; 2637 2638 /* Make sure we have an urb then send the message */ 2639 if (this_urb == NULL) { 2640 dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__); 2641 return -1; 2642 } 2643 2644 /* Save reset port val for resend. 2645 Don't overwrite resend for open/close condition. */ 2646 if ((reset_port + 1) > p_priv->resend_cont) 2647 p_priv->resend_cont = reset_port + 1; 2648 if (this_urb->status == -EINPROGRESS) { 2649 /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ 2650 mdelay(5); 2651 return -1; 2652 } 2653 2654 memset(&msg, 0, sizeof(struct keyspan_usa67_portControlMessage)); 2655 2656 msg.port = device_port; 2657 2658 /* Only set baud rate if it's changed */ 2659 if (p_priv->old_baud != p_priv->baud) { 2660 p_priv->old_baud = p_priv->baud; 2661 msg.setClocking = 0xff; 2662 if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, 2663 &msg.baudHi, &msg.baudLo, &msg.prescaler, 2664 device_port) == KEYSPAN_INVALID_BAUD_RATE) { 2665 dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", 2666 __func__, p_priv->baud); 2667 msg.baudLo = 0; 2668 msg.baudHi = 125; /* Values for 9600 baud */ 2669 msg.prescaler = 10; 2670 } 2671 msg.setPrescaler = 0xff; 2672 } 2673 2674 msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; 2675 switch (p_priv->cflag & CSIZE) { 2676 case CS5: 2677 msg.lcr |= USA_DATABITS_5; 2678 break; 2679 case CS6: 2680 msg.lcr |= USA_DATABITS_6; 2681 break; 2682 case CS7: 2683 msg.lcr |= USA_DATABITS_7; 2684 break; 2685 case CS8: 2686 msg.lcr |= USA_DATABITS_8; 2687 break; 2688 } 2689 if (p_priv->cflag & PARENB) { 2690 /* note USA_PARITY_NONE == 0 */ 2691 msg.lcr |= (p_priv->cflag & PARODD) ? 2692 USA_PARITY_ODD : USA_PARITY_EVEN; 2693 } 2694 msg.setLcr = 0xff; 2695 2696 msg.ctsFlowControl = (p_priv->flow_control == flow_cts); 2697 msg.xonFlowControl = 0; 2698 msg.setFlowControl = 0xff; 2699 msg.forwardingLength = 16; 2700 msg.xonChar = 17; 2701 msg.xoffChar = 19; 2702 2703 if (reset_port == 1) { 2704 /* Opening port */ 2705 msg._txOn = 1; 2706 msg._txOff = 0; 2707 msg.txFlush = 0; 2708 msg.txBreak = 0; 2709 msg.rxOn = 1; 2710 msg.rxOff = 0; 2711 msg.rxFlush = 1; 2712 msg.rxForward = 0; 2713 msg.returnStatus = 0; 2714 msg.resetDataToggle = 0xff; 2715 } else if (reset_port == 2) { 2716 /* Closing port */ 2717 msg._txOn = 0; 2718 msg._txOff = 1; 2719 msg.txFlush = 0; 2720 msg.txBreak = 0; 2721 msg.rxOn = 0; 2722 msg.rxOff = 1; 2723 msg.rxFlush = 1; 2724 msg.rxForward = 0; 2725 msg.returnStatus = 0; 2726 msg.resetDataToggle = 0; 2727 } else { 2728 /* Sending intermediate configs */ 2729 msg._txOn = (!p_priv->break_on); 2730 msg._txOff = 0; 2731 msg.txFlush = 0; 2732 msg.txBreak = (p_priv->break_on); 2733 msg.rxOn = 0; 2734 msg.rxOff = 0; 2735 msg.rxFlush = 0; 2736 msg.rxForward = 0; 2737 msg.returnStatus = 0; 2738 msg.resetDataToggle = 0x0; 2739 } 2740 2741 /* Do handshaking outputs */ 2742 msg.setTxTriState_setRts = 0xff; 2743 msg.txTriState_rts = p_priv->rts_state; 2744 2745 msg.setHskoa_setDtr = 0xff; 2746 msg.hskoa_dtr = p_priv->dtr_state; 2747 2748 p_priv->resend_cont = 0; 2749 2750 memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); 2751 2752 /* send the data out the device on control endpoint */ 2753 this_urb->transfer_buffer_length = sizeof(msg); 2754 2755 err = usb_submit_urb(this_urb, GFP_ATOMIC); 2756 if (err != 0) 2757 dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); 2758 return 0; 2759 } 2760 2761 static void keyspan_send_setup(struct usb_serial_port *port, int reset_port) 2762 { 2763 struct usb_serial *serial = port->serial; 2764 struct keyspan_serial_private *s_priv; 2765 const struct keyspan_device_details *d_details; 2766 2767 s_priv = usb_get_serial_data(serial); 2768 d_details = s_priv->device_details; 2769 2770 switch (d_details->msg_format) { 2771 case msg_usa26: 2772 keyspan_usa26_send_setup(serial, port, reset_port); 2773 break; 2774 case msg_usa28: 2775 keyspan_usa28_send_setup(serial, port, reset_port); 2776 break; 2777 case msg_usa49: 2778 keyspan_usa49_send_setup(serial, port, reset_port); 2779 break; 2780 case msg_usa90: 2781 keyspan_usa90_send_setup(serial, port, reset_port); 2782 break; 2783 case msg_usa67: 2784 keyspan_usa67_send_setup(serial, port, reset_port); 2785 break; 2786 } 2787 } 2788 2789 2790 /* Gets called by the "real" driver (ie once firmware is loaded 2791 and renumeration has taken place. */ 2792 static int keyspan_startup(struct usb_serial *serial) 2793 { 2794 int i, err; 2795 struct keyspan_serial_private *s_priv; 2796 const struct keyspan_device_details *d_details; 2797 2798 for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i) 2799 if (d_details->product_id == 2800 le16_to_cpu(serial->dev->descriptor.idProduct)) 2801 break; 2802 if (d_details == NULL) { 2803 dev_err(&serial->dev->dev, "%s - unknown product id %x\n", 2804 __func__, le16_to_cpu(serial->dev->descriptor.idProduct)); 2805 return -ENODEV; 2806 } 2807 2808 /* Setup private data for serial driver */ 2809 s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL); 2810 if (!s_priv) 2811 return -ENOMEM; 2812 2813 s_priv->instat_buf = kzalloc(INSTAT_BUFLEN, GFP_KERNEL); 2814 if (!s_priv->instat_buf) 2815 goto err_instat_buf; 2816 2817 s_priv->indat_buf = kzalloc(INDAT49W_BUFLEN, GFP_KERNEL); 2818 if (!s_priv->indat_buf) 2819 goto err_indat_buf; 2820 2821 s_priv->glocont_buf = kzalloc(GLOCONT_BUFLEN, GFP_KERNEL); 2822 if (!s_priv->glocont_buf) 2823 goto err_glocont_buf; 2824 2825 s_priv->ctrl_buf = kzalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); 2826 if (!s_priv->ctrl_buf) 2827 goto err_ctrl_buf; 2828 2829 s_priv->device_details = d_details; 2830 usb_set_serial_data(serial, s_priv); 2831 2832 keyspan_setup_urbs(serial); 2833 2834 if (s_priv->instat_urb != NULL) { 2835 err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL); 2836 if (err != 0) 2837 dev_dbg(&serial->dev->dev, "%s - submit instat urb failed %d\n", __func__, err); 2838 } 2839 if (s_priv->indat_urb != NULL) { 2840 err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL); 2841 if (err != 0) 2842 dev_dbg(&serial->dev->dev, "%s - submit indat urb failed %d\n", __func__, err); 2843 } 2844 2845 return 0; 2846 2847 err_ctrl_buf: 2848 kfree(s_priv->glocont_buf); 2849 err_glocont_buf: 2850 kfree(s_priv->indat_buf); 2851 err_indat_buf: 2852 kfree(s_priv->instat_buf); 2853 err_instat_buf: 2854 kfree(s_priv); 2855 2856 return -ENOMEM; 2857 } 2858 2859 static void keyspan_disconnect(struct usb_serial *serial) 2860 { 2861 struct keyspan_serial_private *s_priv; 2862 2863 s_priv = usb_get_serial_data(serial); 2864 2865 usb_kill_urb(s_priv->instat_urb); 2866 usb_kill_urb(s_priv->glocont_urb); 2867 usb_kill_urb(s_priv->indat_urb); 2868 } 2869 2870 static void keyspan_release(struct usb_serial *serial) 2871 { 2872 struct keyspan_serial_private *s_priv; 2873 2874 s_priv = usb_get_serial_data(serial); 2875 2876 /* Make sure to unlink the URBs submitted in attach. */ 2877 usb_kill_urb(s_priv->instat_urb); 2878 usb_kill_urb(s_priv->indat_urb); 2879 2880 usb_free_urb(s_priv->instat_urb); 2881 usb_free_urb(s_priv->indat_urb); 2882 usb_free_urb(s_priv->glocont_urb); 2883 2884 kfree(s_priv->ctrl_buf); 2885 kfree(s_priv->glocont_buf); 2886 kfree(s_priv->indat_buf); 2887 kfree(s_priv->instat_buf); 2888 2889 kfree(s_priv); 2890 } 2891 2892 static int keyspan_port_probe(struct usb_serial_port *port) 2893 { 2894 struct usb_serial *serial = port->serial; 2895 struct keyspan_serial_private *s_priv; 2896 struct keyspan_port_private *p_priv; 2897 const struct keyspan_device_details *d_details; 2898 struct callbacks *cback; 2899 int endp; 2900 int port_num; 2901 int i; 2902 2903 s_priv = usb_get_serial_data(serial); 2904 d_details = s_priv->device_details; 2905 2906 p_priv = kzalloc(sizeof(*p_priv), GFP_KERNEL); 2907 if (!p_priv) 2908 return -ENOMEM; 2909 2910 for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) { 2911 p_priv->in_buffer[i] = kzalloc(IN_BUFLEN, GFP_KERNEL); 2912 if (!p_priv->in_buffer[i]) 2913 goto err_in_buffer; 2914 } 2915 2916 for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) { 2917 p_priv->out_buffer[i] = kzalloc(OUT_BUFLEN, GFP_KERNEL); 2918 if (!p_priv->out_buffer[i]) 2919 goto err_out_buffer; 2920 } 2921 2922 p_priv->inack_buffer = kzalloc(INACK_BUFLEN, GFP_KERNEL); 2923 if (!p_priv->inack_buffer) 2924 goto err_inack_buffer; 2925 2926 p_priv->outcont_buffer = kzalloc(OUTCONT_BUFLEN, GFP_KERNEL); 2927 if (!p_priv->outcont_buffer) 2928 goto err_outcont_buffer; 2929 2930 p_priv->device_details = d_details; 2931 2932 /* Setup values for the various callback routines */ 2933 cback = &keyspan_callbacks[d_details->msg_format]; 2934 2935 port_num = port->port_number; 2936 2937 /* Do indat endpoints first, once for each flip */ 2938 endp = d_details->indat_endpoints[port_num]; 2939 for (i = 0; i <= d_details->indat_endp_flip; ++i, ++endp) { 2940 p_priv->in_urbs[i] = keyspan_setup_urb(serial, endp, 2941 USB_DIR_IN, port, 2942 p_priv->in_buffer[i], 2943 IN_BUFLEN, 2944 cback->indat_callback); 2945 } 2946 /* outdat endpoints also have flip */ 2947 endp = d_details->outdat_endpoints[port_num]; 2948 for (i = 0; i <= d_details->outdat_endp_flip; ++i, ++endp) { 2949 p_priv->out_urbs[i] = keyspan_setup_urb(serial, endp, 2950 USB_DIR_OUT, port, 2951 p_priv->out_buffer[i], 2952 OUT_BUFLEN, 2953 cback->outdat_callback); 2954 } 2955 /* inack endpoint */ 2956 p_priv->inack_urb = keyspan_setup_urb(serial, 2957 d_details->inack_endpoints[port_num], 2958 USB_DIR_IN, port, 2959 p_priv->inack_buffer, 2960 INACK_BUFLEN, 2961 cback->inack_callback); 2962 /* outcont endpoint */ 2963 p_priv->outcont_urb = keyspan_setup_urb(serial, 2964 d_details->outcont_endpoints[port_num], 2965 USB_DIR_OUT, port, 2966 p_priv->outcont_buffer, 2967 OUTCONT_BUFLEN, 2968 cback->outcont_callback); 2969 2970 usb_set_serial_port_data(port, p_priv); 2971 2972 return 0; 2973 2974 err_outcont_buffer: 2975 kfree(p_priv->inack_buffer); 2976 err_inack_buffer: 2977 for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) 2978 kfree(p_priv->out_buffer[i]); 2979 err_out_buffer: 2980 for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) 2981 kfree(p_priv->in_buffer[i]); 2982 err_in_buffer: 2983 kfree(p_priv); 2984 2985 return -ENOMEM; 2986 } 2987 2988 static int keyspan_port_remove(struct usb_serial_port *port) 2989 { 2990 struct keyspan_port_private *p_priv; 2991 int i; 2992 2993 p_priv = usb_get_serial_port_data(port); 2994 2995 usb_kill_urb(p_priv->inack_urb); 2996 usb_kill_urb(p_priv->outcont_urb); 2997 for (i = 0; i < 2; i++) { 2998 usb_kill_urb(p_priv->in_urbs[i]); 2999 usb_kill_urb(p_priv->out_urbs[i]); 3000 } 3001 3002 usb_free_urb(p_priv->inack_urb); 3003 usb_free_urb(p_priv->outcont_urb); 3004 for (i = 0; i < 2; i++) { 3005 usb_free_urb(p_priv->in_urbs[i]); 3006 usb_free_urb(p_priv->out_urbs[i]); 3007 } 3008 3009 kfree(p_priv->outcont_buffer); 3010 kfree(p_priv->inack_buffer); 3011 for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) 3012 kfree(p_priv->out_buffer[i]); 3013 for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) 3014 kfree(p_priv->in_buffer[i]); 3015 3016 kfree(p_priv); 3017 3018 return 0; 3019 } 3020 3021 /* Structs for the devices, pre and post renumeration. */ 3022 static struct usb_serial_driver keyspan_pre_device = { 3023 .driver = { 3024 .owner = THIS_MODULE, 3025 .name = "keyspan_no_firm", 3026 }, 3027 .description = "Keyspan - (without firmware)", 3028 .id_table = keyspan_pre_ids, 3029 .num_ports = 1, 3030 .attach = keyspan_fake_startup, 3031 }; 3032 3033 static struct usb_serial_driver keyspan_1port_device = { 3034 .driver = { 3035 .owner = THIS_MODULE, 3036 .name = "keyspan_1", 3037 }, 3038 .description = "Keyspan 1 port adapter", 3039 .id_table = keyspan_1port_ids, 3040 .num_ports = 1, 3041 .open = keyspan_open, 3042 .close = keyspan_close, 3043 .dtr_rts = keyspan_dtr_rts, 3044 .write = keyspan_write, 3045 .write_room = keyspan_write_room, 3046 .set_termios = keyspan_set_termios, 3047 .break_ctl = keyspan_break_ctl, 3048 .tiocmget = keyspan_tiocmget, 3049 .tiocmset = keyspan_tiocmset, 3050 .attach = keyspan_startup, 3051 .disconnect = keyspan_disconnect, 3052 .release = keyspan_release, 3053 .port_probe = keyspan_port_probe, 3054 .port_remove = keyspan_port_remove, 3055 }; 3056 3057 static struct usb_serial_driver keyspan_2port_device = { 3058 .driver = { 3059 .owner = THIS_MODULE, 3060 .name = "keyspan_2", 3061 }, 3062 .description = "Keyspan 2 port adapter", 3063 .id_table = keyspan_2port_ids, 3064 .num_ports = 2, 3065 .open = keyspan_open, 3066 .close = keyspan_close, 3067 .dtr_rts = keyspan_dtr_rts, 3068 .write = keyspan_write, 3069 .write_room = keyspan_write_room, 3070 .set_termios = keyspan_set_termios, 3071 .break_ctl = keyspan_break_ctl, 3072 .tiocmget = keyspan_tiocmget, 3073 .tiocmset = keyspan_tiocmset, 3074 .attach = keyspan_startup, 3075 .disconnect = keyspan_disconnect, 3076 .release = keyspan_release, 3077 .port_probe = keyspan_port_probe, 3078 .port_remove = keyspan_port_remove, 3079 }; 3080 3081 static struct usb_serial_driver keyspan_4port_device = { 3082 .driver = { 3083 .owner = THIS_MODULE, 3084 .name = "keyspan_4", 3085 }, 3086 .description = "Keyspan 4 port adapter", 3087 .id_table = keyspan_4port_ids, 3088 .num_ports = 4, 3089 .open = keyspan_open, 3090 .close = keyspan_close, 3091 .dtr_rts = keyspan_dtr_rts, 3092 .write = keyspan_write, 3093 .write_room = keyspan_write_room, 3094 .set_termios = keyspan_set_termios, 3095 .break_ctl = keyspan_break_ctl, 3096 .tiocmget = keyspan_tiocmget, 3097 .tiocmset = keyspan_tiocmset, 3098 .attach = keyspan_startup, 3099 .disconnect = keyspan_disconnect, 3100 .release = keyspan_release, 3101 .port_probe = keyspan_port_probe, 3102 .port_remove = keyspan_port_remove, 3103 }; 3104 3105 static struct usb_serial_driver * const serial_drivers[] = { 3106 &keyspan_pre_device, &keyspan_1port_device, 3107 &keyspan_2port_device, &keyspan_4port_device, NULL 3108 }; 3109 3110 module_usb_serial_driver(serial_drivers, keyspan_ids_combined); 3111 3112 MODULE_AUTHOR(DRIVER_AUTHOR); 3113 MODULE_DESCRIPTION(DRIVER_DESC); 3114 MODULE_LICENSE("GPL"); 3115 3116 MODULE_FIRMWARE("keyspan/usa28.fw"); 3117 MODULE_FIRMWARE("keyspan/usa28x.fw"); 3118 MODULE_FIRMWARE("keyspan/usa28xa.fw"); 3119 MODULE_FIRMWARE("keyspan/usa28xb.fw"); 3120 MODULE_FIRMWARE("keyspan/usa19.fw"); 3121 MODULE_FIRMWARE("keyspan/usa19qi.fw"); 3122 MODULE_FIRMWARE("keyspan/mpr.fw"); 3123 MODULE_FIRMWARE("keyspan/usa19qw.fw"); 3124 MODULE_FIRMWARE("keyspan/usa18x.fw"); 3125 MODULE_FIRMWARE("keyspan/usa19w.fw"); 3126 MODULE_FIRMWARE("keyspan/usa49w.fw"); 3127 MODULE_FIRMWARE("keyspan/usa49wlc.fw"); 3128