1 /* 2 * Edgeport USB Serial Converter driver 3 * 4 * Copyright (C) 2000 Inside Out Networks, All rights reserved. 5 * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * Supports the following devices: 13 * Edgeport/4 14 * Edgeport/4t 15 * Edgeport/2 16 * Edgeport/4i 17 * Edgeport/2i 18 * Edgeport/421 19 * Edgeport/21 20 * Rapidport/4 21 * Edgeport/8 22 * Edgeport/2D8 23 * Edgeport/4D8 24 * Edgeport/8i 25 * 26 * For questions or problems with this driver, contact Inside Out 27 * Networks technical support, or Peter Berger <pberger@brimson.com>, 28 * or Al Borchers <alborchers@steinerpoint.com>. 29 * 30 */ 31 32 #include <linux/config.h> 33 #include <linux/kernel.h> 34 #include <linux/jiffies.h> 35 #include <linux/errno.h> 36 #include <linux/init.h> 37 #include <linux/slab.h> 38 #include <linux/tty.h> 39 #include <linux/tty_driver.h> 40 #include <linux/tty_flip.h> 41 #include <linux/module.h> 42 #include <linux/spinlock.h> 43 #include <linux/serial.h> 44 #include <linux/ioctl.h> 45 #include <linux/wait.h> 46 #include <asm/uaccess.h> 47 #include <linux/usb.h> 48 #include "usb-serial.h" 49 #include "io_edgeport.h" 50 #include "io_ionsp.h" /* info for the iosp messages */ 51 #include "io_16654.h" /* 16654 UART defines */ 52 53 /* 54 * Version Information 55 */ 56 #define DRIVER_VERSION "v2.7" 57 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli" 58 #define DRIVER_DESC "Edgeport USB Serial Driver" 59 60 /* First, the latest boot code - for first generation edgeports */ 61 #define IMAGE_ARRAY_NAME BootCodeImage_GEN1 62 #define IMAGE_VERSION_NAME BootCodeImageVersion_GEN1 63 #include "io_fw_boot.h" /* the bootloader firmware to download to a device, if it needs it */ 64 65 /* for second generation edgeports */ 66 #define IMAGE_ARRAY_NAME BootCodeImage_GEN2 67 #define IMAGE_VERSION_NAME BootCodeImageVersion_GEN2 68 #include "io_fw_boot2.h" /* the bootloader firmware to download to a device, if it needs it */ 69 70 /* Then finally the main run-time operational code - for first generation edgeports */ 71 #define IMAGE_ARRAY_NAME OperationalCodeImage_GEN1 72 #define IMAGE_VERSION_NAME OperationalCodeImageVersion_GEN1 73 #include "io_fw_down.h" /* Define array OperationalCodeImage[] */ 74 75 /* for second generation edgeports */ 76 #define IMAGE_ARRAY_NAME OperationalCodeImage_GEN2 77 #define IMAGE_VERSION_NAME OperationalCodeImageVersion_GEN2 78 #include "io_fw_down2.h" /* Define array OperationalCodeImage[] */ 79 80 #define MAX_NAME_LEN 64 81 82 #define CHASE_TIMEOUT (5*HZ) /* 5 seconds */ 83 #define OPEN_TIMEOUT (5*HZ) /* 5 seconds */ 84 #define COMMAND_TIMEOUT (5*HZ) /* 5 seconds */ 85 86 /* receive port state */ 87 enum RXSTATE { 88 EXPECT_HDR1 = 0, /* Expect header byte 1 */ 89 EXPECT_HDR2 = 1, /* Expect header byte 2 */ 90 EXPECT_DATA = 2, /* Expect 'RxBytesRemaining' data */ 91 EXPECT_HDR3 = 3, /* Expect header byte 3 (for status hdrs only) */ 92 }; 93 94 95 /* Transmit Fifo 96 * This Transmit queue is an extension of the edgeport Rx buffer. 97 * The maximum amount of data buffered in both the edgeport 98 * Rx buffer (maxTxCredits) and this buffer will never exceed maxTxCredits. 99 */ 100 struct TxFifo { 101 unsigned int head; /* index to head pointer (write) */ 102 unsigned int tail; /* index to tail pointer (read) */ 103 unsigned int count; /* Bytes in queue */ 104 unsigned int size; /* Max size of queue (equal to Max number of TxCredits) */ 105 unsigned char *fifo; /* allocated Buffer */ 106 }; 107 108 /* This structure holds all of the local port information */ 109 struct edgeport_port { 110 __u16 txCredits; /* our current credits for this port */ 111 __u16 maxTxCredits; /* the max size of the port */ 112 113 struct TxFifo txfifo; /* transmit fifo -- size will be maxTxCredits */ 114 struct urb *write_urb; /* write URB for this port */ 115 char write_in_progress; /* TRUE while a write URB is outstanding */ 116 spinlock_t ep_lock; 117 118 __u8 shadowLCR; /* last LCR value received */ 119 __u8 shadowMCR; /* last MCR value received */ 120 __u8 shadowMSR; /* last MSR value received */ 121 __u8 shadowLSR; /* last LSR value received */ 122 __u8 shadowXonChar; /* last value set as XON char in Edgeport */ 123 __u8 shadowXoffChar; /* last value set as XOFF char in Edgeport */ 124 __u8 validDataMask; 125 __u32 baudRate; 126 127 char open; 128 char openPending; 129 char commandPending; 130 char closePending; 131 char chaseResponsePending; 132 133 wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ 134 wait_queue_head_t wait_open; /* for handling sleeping while waiting for open to finish */ 135 wait_queue_head_t wait_command; /* for handling sleeping while waiting for command to finish */ 136 wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */ 137 138 struct async_icount icount; 139 struct usb_serial_port *port; /* loop back to the owner of this object */ 140 }; 141 142 143 /* This structure holds all of the individual device information */ 144 struct edgeport_serial { 145 char name[MAX_NAME_LEN+1]; /* string name of this device */ 146 147 struct edge_manuf_descriptor manuf_descriptor; /* the manufacturer descriptor */ 148 struct edge_boot_descriptor boot_descriptor; /* the boot firmware descriptor */ 149 struct edgeport_product_info product_info; /* Product Info */ 150 151 __u8 interrupt_in_endpoint; /* the interrupt endpoint handle */ 152 unsigned char * interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */ 153 struct urb * interrupt_read_urb; /* our interrupt urb */ 154 155 __u8 bulk_in_endpoint; /* the bulk in endpoint handle */ 156 unsigned char * bulk_in_buffer; /* the buffer we use for the bulk in endpoint */ 157 struct urb * read_urb; /* our bulk read urb */ 158 int read_in_progress; 159 spinlock_t es_lock; 160 161 __u8 bulk_out_endpoint; /* the bulk out endpoint handle */ 162 163 __s16 rxBytesAvail; /* the number of bytes that we need to read from this device */ 164 165 enum RXSTATE rxState; /* the current state of the bulk receive processor */ 166 __u8 rxHeader1; /* receive header byte 1 */ 167 __u8 rxHeader2; /* receive header byte 2 */ 168 __u8 rxHeader3; /* receive header byte 3 */ 169 __u8 rxPort; /* the port that we are currently receiving data for */ 170 __u8 rxStatusCode; /* the receive status code */ 171 __u8 rxStatusParam; /* the receive status paramater */ 172 __s16 rxBytesRemaining; /* the number of port bytes left to read */ 173 struct usb_serial *serial; /* loop back to the owner of this object */ 174 }; 175 176 /* baud rate information */ 177 struct divisor_table_entry { 178 __u32 BaudRate; 179 __u16 Divisor; 180 }; 181 182 // 183 // Define table of divisors for Rev A EdgePort/4 hardware 184 // These assume a 3.6864MHz crystal, the standard /16, and 185 // MCR.7 = 0. 186 // 187 static const struct divisor_table_entry divisor_table[] = { 188 { 50, 4608}, 189 { 75, 3072}, 190 { 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */ 191 { 134, 1713}, /* 1713.011152 => 230398.5 => .00065% under */ 192 { 150, 1536}, 193 { 300, 768}, 194 { 600, 384}, 195 { 1200, 192}, 196 { 1800, 128}, 197 { 2400, 96}, 198 { 4800, 48}, 199 { 7200, 32}, 200 { 9600, 24}, 201 { 14400, 16}, 202 { 19200, 12}, 203 { 38400, 6}, 204 { 57600, 4}, 205 { 115200, 2}, 206 { 230400, 1}, 207 }; 208 209 /* local variables */ 210 static int debug; 211 212 static int low_latency = 1; /* tty low latency flag, on by default */ 213 214 static int CmdUrbs = 0; /* Number of outstanding Command Write Urbs */ 215 216 217 /* local function prototypes */ 218 219 /* function prototypes for all URB callbacks */ 220 static void edge_interrupt_callback (struct urb *urb, struct pt_regs *regs); 221 static void edge_bulk_in_callback (struct urb *urb, struct pt_regs *regs); 222 static void edge_bulk_out_data_callback (struct urb *urb, struct pt_regs *regs); 223 static void edge_bulk_out_cmd_callback (struct urb *urb, struct pt_regs *regs); 224 225 /* function prototypes for the usbserial callbacks */ 226 static int edge_open (struct usb_serial_port *port, struct file *filp); 227 static void edge_close (struct usb_serial_port *port, struct file *filp); 228 static int edge_write (struct usb_serial_port *port, const unsigned char *buf, int count); 229 static int edge_write_room (struct usb_serial_port *port); 230 static int edge_chars_in_buffer (struct usb_serial_port *port); 231 static void edge_throttle (struct usb_serial_port *port); 232 static void edge_unthrottle (struct usb_serial_port *port); 233 static void edge_set_termios (struct usb_serial_port *port, struct termios *old_termios); 234 static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg); 235 static void edge_break (struct usb_serial_port *port, int break_state); 236 static int edge_tiocmget (struct usb_serial_port *port, struct file *file); 237 static int edge_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear); 238 static int edge_startup (struct usb_serial *serial); 239 static void edge_shutdown (struct usb_serial *serial); 240 241 242 #include "io_tables.h" /* all of the devices that this driver supports */ 243 244 static struct usb_driver io_driver = { 245 .name = "io_edgeport", 246 .probe = usb_serial_probe, 247 .disconnect = usb_serial_disconnect, 248 .id_table = id_table_combined, 249 .no_dynamic_id = 1, 250 }; 251 252 /* function prototypes for all of our local functions */ 253 static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength); 254 static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3); 255 static void edge_tty_recv (struct device *dev, struct tty_struct *tty, unsigned char *data, int length); 256 static void handle_new_msr (struct edgeport_port *edge_port, __u8 newMsr); 257 static void handle_new_lsr (struct edgeport_port *edge_port, __u8 lsrData, __u8 lsr, __u8 data); 258 static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u8 param); 259 static int calc_baud_rate_divisor (int baud_rate, int *divisor); 260 static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRate); 261 static void change_port_settings (struct edgeport_port *edge_port, struct termios *old_termios); 262 static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 regNum, __u8 regValue); 263 static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer, int writeLength); 264 static void send_more_port_data (struct edgeport_serial *edge_serial, struct edgeport_port *edge_port); 265 266 static int sram_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data); 267 static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data); 268 static int rom_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data); 269 static void get_manufacturing_desc (struct edgeport_serial *edge_serial); 270 static void get_boot_desc (struct edgeport_serial *edge_serial); 271 static void load_application_firmware (struct edgeport_serial *edge_serial); 272 273 static void unicode_to_ascii (char *string, __le16 *unicode, int unicode_size); 274 275 276 // ************************************************************************ 277 // ************************************************************************ 278 // ************************************************************************ 279 // ************************************************************************ 280 281 /************************************************************************ 282 * * 283 * update_edgeport_E2PROM() Compare current versions of * 284 * Boot ROM and Manufacture * 285 * Descriptors with versions * 286 * embedded in this driver * 287 * * 288 ************************************************************************/ 289 static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial) 290 { 291 __u32 BootCurVer; 292 __u32 BootNewVer; 293 __u8 BootMajorVersion; 294 __u8 BootMinorVersion; 295 __le16 BootBuildNumber; 296 __u8 *BootImage; 297 __u32 BootSize; 298 struct edge_firmware_image_record *record; 299 unsigned char *firmware; 300 int response; 301 302 303 switch (edge_serial->product_info.iDownloadFile) { 304 case EDGE_DOWNLOAD_FILE_I930: 305 BootMajorVersion = BootCodeImageVersion_GEN1.MajorVersion; 306 BootMinorVersion = BootCodeImageVersion_GEN1.MinorVersion; 307 BootBuildNumber = cpu_to_le16(BootCodeImageVersion_GEN1.BuildNumber); 308 BootImage = &BootCodeImage_GEN1[0]; 309 BootSize = sizeof( BootCodeImage_GEN1 ); 310 break; 311 312 case EDGE_DOWNLOAD_FILE_80251: 313 BootMajorVersion = BootCodeImageVersion_GEN2.MajorVersion; 314 BootMinorVersion = BootCodeImageVersion_GEN2.MinorVersion; 315 BootBuildNumber = cpu_to_le16(BootCodeImageVersion_GEN2.BuildNumber); 316 BootImage = &BootCodeImage_GEN2[0]; 317 BootSize = sizeof( BootCodeImage_GEN2 ); 318 break; 319 320 default: 321 return; 322 } 323 324 // Check Boot Image Version 325 BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) + 326 (edge_serial->boot_descriptor.MinorVersion << 16) + 327 le16_to_cpu(edge_serial->boot_descriptor.BuildNumber); 328 329 BootNewVer = (BootMajorVersion << 24) + 330 (BootMinorVersion << 16) + 331 le16_to_cpu(BootBuildNumber); 332 333 dbg("Current Boot Image version %d.%d.%d", 334 edge_serial->boot_descriptor.MajorVersion, 335 edge_serial->boot_descriptor.MinorVersion, 336 le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); 337 338 339 if (BootNewVer > BootCurVer) { 340 dbg("**Update Boot Image from %d.%d.%d to %d.%d.%d", 341 edge_serial->boot_descriptor.MajorVersion, 342 edge_serial->boot_descriptor.MinorVersion, 343 le16_to_cpu(edge_serial->boot_descriptor.BuildNumber), 344 BootMajorVersion, 345 BootMinorVersion, 346 le16_to_cpu(BootBuildNumber)); 347 348 349 dbg("Downloading new Boot Image"); 350 351 firmware = BootImage; 352 353 for (;;) { 354 record = (struct edge_firmware_image_record *)firmware; 355 response = rom_write (edge_serial->serial, le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len), &record->Data[0]); 356 if (response < 0) { 357 dev_err(&edge_serial->serial->dev->dev, "rom_write failed (%x, %x, %d)\n", le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len)); 358 break; 359 } 360 firmware += sizeof (struct edge_firmware_image_record) + le16_to_cpu(record->Len); 361 if (firmware >= &BootImage[BootSize]) { 362 break; 363 } 364 } 365 } else { 366 dbg("Boot Image -- already up to date"); 367 } 368 } 369 370 371 /************************************************************************ 372 * * 373 * Get string descriptor from device * 374 * * 375 ************************************************************************/ 376 static int get_string (struct usb_device *dev, int Id, char *string) 377 { 378 struct usb_string_descriptor StringDesc; 379 struct usb_string_descriptor *pStringDesc; 380 381 dbg("%s - USB String ID = %d", __FUNCTION__, Id ); 382 383 if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) { 384 return 0; 385 } 386 387 pStringDesc = kmalloc (StringDesc.bLength, GFP_KERNEL); 388 389 if (!pStringDesc) { 390 return 0; 391 } 392 393 if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, StringDesc.bLength )) { 394 kfree(pStringDesc); 395 return 0; 396 } 397 398 unicode_to_ascii(string, pStringDesc->wData, pStringDesc->bLength/2-1); 399 400 kfree(pStringDesc); 401 return strlen(string); 402 } 403 404 405 #if 0 406 /************************************************************************ 407 * 408 * Get string descriptor from device 409 * 410 ************************************************************************/ 411 static int get_string_desc (struct usb_device *dev, int Id, struct usb_string_descriptor **pRetDesc) 412 { 413 struct usb_string_descriptor StringDesc; 414 struct usb_string_descriptor *pStringDesc; 415 416 dbg("%s - USB String ID = %d", __FUNCTION__, Id ); 417 418 if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) { 419 return 0; 420 } 421 422 pStringDesc = kmalloc (StringDesc.bLength, GFP_KERNEL); 423 424 if (!pStringDesc) { 425 return -1; 426 } 427 428 if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, StringDesc.bLength )) { 429 kfree(pStringDesc); 430 return -1; 431 } 432 433 *pRetDesc = pStringDesc; 434 return 0; 435 } 436 #endif 437 438 static void get_product_info(struct edgeport_serial *edge_serial) 439 { 440 struct edgeport_product_info *product_info = &edge_serial->product_info; 441 442 memset (product_info, 0, sizeof(struct edgeport_product_info)); 443 444 product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP); 445 product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts; 446 product_info->ProdInfoVer = 0; 447 448 product_info->RomSize = edge_serial->manuf_descriptor.RomSize; 449 product_info->RamSize = edge_serial->manuf_descriptor.RamSize; 450 product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev; 451 product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev; 452 453 product_info->BootMajorVersion = edge_serial->boot_descriptor.MajorVersion; 454 product_info->BootMinorVersion = edge_serial->boot_descriptor.MinorVersion; 455 product_info->BootBuildNumber = edge_serial->boot_descriptor.BuildNumber; 456 457 memcpy(product_info->ManufactureDescDate, edge_serial->manuf_descriptor.DescDate, sizeof(edge_serial->manuf_descriptor.DescDate)); 458 459 // check if this is 2nd generation hardware 460 if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ION_DEVICE_ID_80251_NETCHIP) { 461 product_info->FirmwareMajorVersion = OperationalCodeImageVersion_GEN2.MajorVersion; 462 product_info->FirmwareMinorVersion = OperationalCodeImageVersion_GEN2.MinorVersion; 463 product_info->FirmwareBuildNumber = cpu_to_le16(OperationalCodeImageVersion_GEN2.BuildNumber); 464 product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251; 465 } else { 466 product_info->FirmwareMajorVersion = OperationalCodeImageVersion_GEN1.MajorVersion; 467 product_info->FirmwareMinorVersion = OperationalCodeImageVersion_GEN1.MinorVersion; 468 product_info->FirmwareBuildNumber = cpu_to_le16(OperationalCodeImageVersion_GEN1.BuildNumber); 469 product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930; 470 } 471 472 // Determine Product type and set appropriate flags 473 switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) { 474 case ION_DEVICE_ID_EDGEPORT_COMPATIBLE: 475 case ION_DEVICE_ID_EDGEPORT_4T: 476 case ION_DEVICE_ID_EDGEPORT_4: 477 case ION_DEVICE_ID_EDGEPORT_2: 478 case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU: 479 case ION_DEVICE_ID_EDGEPORT_8: 480 case ION_DEVICE_ID_EDGEPORT_421: 481 case ION_DEVICE_ID_EDGEPORT_21: 482 case ION_DEVICE_ID_EDGEPORT_2_DIN: 483 case ION_DEVICE_ID_EDGEPORT_4_DIN: 484 case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU: 485 product_info->IsRS232 = 1; 486 break; 487 488 case ION_DEVICE_ID_EDGEPORT_2I: // Edgeport/2 RS422/RS485 489 product_info->IsRS422 = 1; 490 product_info->IsRS485 = 1; 491 break; 492 493 case ION_DEVICE_ID_EDGEPORT_8I: // Edgeport/4 RS422 494 case ION_DEVICE_ID_EDGEPORT_4I: // Edgeport/4 RS422 495 product_info->IsRS422 = 1; 496 break; 497 } 498 499 // Dump Product Info structure 500 dbg("**Product Information:"); 501 dbg(" ProductId %x", product_info->ProductId ); 502 dbg(" NumPorts %d", product_info->NumPorts ); 503 dbg(" ProdInfoVer %d", product_info->ProdInfoVer ); 504 dbg(" IsServer %d", product_info->IsServer); 505 dbg(" IsRS232 %d", product_info->IsRS232 ); 506 dbg(" IsRS422 %d", product_info->IsRS422 ); 507 dbg(" IsRS485 %d", product_info->IsRS485 ); 508 dbg(" RomSize %d", product_info->RomSize ); 509 dbg(" RamSize %d", product_info->RamSize ); 510 dbg(" CpuRev %x", product_info->CpuRev ); 511 dbg(" BoardRev %x", product_info->BoardRev); 512 dbg(" BootMajorVersion %d.%d.%d", product_info->BootMajorVersion, 513 product_info->BootMinorVersion, 514 le16_to_cpu(product_info->BootBuildNumber)); 515 dbg(" FirmwareMajorVersion %d.%d.%d", product_info->FirmwareMajorVersion, 516 product_info->FirmwareMinorVersion, 517 le16_to_cpu(product_info->FirmwareBuildNumber)); 518 dbg(" ManufactureDescDate %d/%d/%d", product_info->ManufactureDescDate[0], 519 product_info->ManufactureDescDate[1], 520 product_info->ManufactureDescDate[2]+1900); 521 dbg(" iDownloadFile 0x%x", product_info->iDownloadFile); 522 523 } 524 525 526 /************************************************************************/ 527 /************************************************************************/ 528 /* U S B C A L L B A C K F U N C T I O N S */ 529 /* U S B C A L L B A C K F U N C T I O N S */ 530 /************************************************************************/ 531 /************************************************************************/ 532 533 /***************************************************************************** 534 * edge_interrupt_callback 535 * this is the callback function for when we have received data on the 536 * interrupt endpoint. 537 *****************************************************************************/ 538 static void edge_interrupt_callback (struct urb *urb, struct pt_regs *regs) 539 { 540 struct edgeport_serial *edge_serial = (struct edgeport_serial *)urb->context; 541 struct edgeport_port *edge_port; 542 struct usb_serial_port *port; 543 unsigned char *data = urb->transfer_buffer; 544 int length = urb->actual_length; 545 int bytes_avail; 546 int position; 547 int txCredits; 548 int portNumber; 549 int result; 550 551 dbg("%s", __FUNCTION__); 552 553 switch (urb->status) { 554 case 0: 555 /* success */ 556 break; 557 case -ECONNRESET: 558 case -ENOENT: 559 case -ESHUTDOWN: 560 /* this urb is terminated, clean up */ 561 dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); 562 return; 563 default: 564 dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); 565 goto exit; 566 } 567 568 // process this interrupt-read even if there are no ports open 569 if (length) { 570 usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __FUNCTION__, length, data); 571 572 if (length > 1) { 573 bytes_avail = data[0] | (data[1] << 8); 574 if (bytes_avail) { 575 spin_lock(&edge_serial->es_lock); 576 edge_serial->rxBytesAvail += bytes_avail; 577 dbg("%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d", __FUNCTION__, bytes_avail, edge_serial->rxBytesAvail, edge_serial->read_in_progress); 578 579 if (edge_serial->rxBytesAvail > 0 && 580 !edge_serial->read_in_progress) { 581 dbg("%s - posting a read", __FUNCTION__); 582 edge_serial->read_in_progress = TRUE; 583 584 /* we have pending bytes on the bulk in pipe, send a request */ 585 edge_serial->read_urb->dev = edge_serial->serial->dev; 586 result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); 587 if (result) { 588 dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __FUNCTION__, result); 589 edge_serial->read_in_progress = FALSE; 590 } 591 } 592 spin_unlock(&edge_serial->es_lock); 593 } 594 } 595 /* grab the txcredits for the ports if available */ 596 position = 2; 597 portNumber = 0; 598 while ((position < length) && (portNumber < edge_serial->serial->num_ports)) { 599 txCredits = data[position] | (data[position+1] << 8); 600 if (txCredits) { 601 port = edge_serial->serial->port[portNumber]; 602 edge_port = usb_get_serial_port_data(port); 603 if (edge_port->open) { 604 spin_lock(&edge_port->ep_lock); 605 edge_port->txCredits += txCredits; 606 spin_unlock(&edge_port->ep_lock); 607 dbg("%s - txcredits for port%d = %d", __FUNCTION__, portNumber, edge_port->txCredits); 608 609 /* tell the tty driver that something has changed */ 610 if (edge_port->port->tty) 611 tty_wakeup(edge_port->port->tty); 612 613 // Since we have more credit, check if more data can be sent 614 send_more_port_data(edge_serial, edge_port); 615 } 616 } 617 position += 2; 618 ++portNumber; 619 } 620 } 621 622 exit: 623 result = usb_submit_urb (urb, GFP_ATOMIC); 624 if (result) { 625 dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", __FUNCTION__, result); 626 } 627 } 628 629 630 /***************************************************************************** 631 * edge_bulk_in_callback 632 * this is the callback function for when we have received data on the 633 * bulk in endpoint. 634 *****************************************************************************/ 635 static void edge_bulk_in_callback (struct urb *urb, struct pt_regs *regs) 636 { 637 struct edgeport_serial *edge_serial = (struct edgeport_serial *)urb->context; 638 unsigned char *data = urb->transfer_buffer; 639 int status; 640 __u16 raw_data_length; 641 642 dbg("%s", __FUNCTION__); 643 644 if (urb->status) { 645 dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status); 646 edge_serial->read_in_progress = FALSE; 647 return; 648 } 649 650 if (urb->actual_length == 0) { 651 dbg("%s - read bulk callback with no data", __FUNCTION__); 652 edge_serial->read_in_progress = FALSE; 653 return; 654 } 655 656 raw_data_length = urb->actual_length; 657 658 usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __FUNCTION__, raw_data_length, data); 659 660 spin_lock(&edge_serial->es_lock); 661 662 /* decrement our rxBytes available by the number that we just got */ 663 edge_serial->rxBytesAvail -= raw_data_length; 664 665 dbg("%s - Received = %d, rxBytesAvail %d", __FUNCTION__, raw_data_length, edge_serial->rxBytesAvail); 666 667 process_rcvd_data (edge_serial, data, urb->actual_length); 668 669 /* check to see if there's any more data for us to read */ 670 if (edge_serial->rxBytesAvail > 0) { 671 dbg("%s - posting a read", __FUNCTION__); 672 edge_serial->read_urb->dev = edge_serial->serial->dev; 673 status = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); 674 if (status) { 675 dev_err(&urb->dev->dev, "%s - usb_submit_urb(read bulk) failed, status = %d\n", __FUNCTION__, status); 676 edge_serial->read_in_progress = FALSE; 677 } 678 } else { 679 edge_serial->read_in_progress = FALSE; 680 } 681 682 spin_unlock(&edge_serial->es_lock); 683 } 684 685 686 /***************************************************************************** 687 * edge_bulk_out_data_callback 688 * this is the callback function for when we have finished sending serial data 689 * on the bulk out endpoint. 690 *****************************************************************************/ 691 static void edge_bulk_out_data_callback (struct urb *urb, struct pt_regs *regs) 692 { 693 struct edgeport_port *edge_port = (struct edgeport_port *)urb->context; 694 struct tty_struct *tty; 695 696 dbg("%s", __FUNCTION__); 697 698 if (urb->status) { 699 dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); 700 } 701 702 tty = edge_port->port->tty; 703 704 if (tty && edge_port->open) { 705 /* let the tty driver wakeup if it has a special write_wakeup function */ 706 tty_wakeup(tty); 707 } 708 709 // Release the Write URB 710 edge_port->write_in_progress = FALSE; 711 712 // Check if more data needs to be sent 713 send_more_port_data((struct edgeport_serial *)(usb_get_serial_data(edge_port->port->serial)), edge_port); 714 } 715 716 717 /***************************************************************************** 718 * BulkOutCmdCallback 719 * this is the callback function for when we have finished sending a command 720 * on the bulk out endpoint. 721 *****************************************************************************/ 722 static void edge_bulk_out_cmd_callback (struct urb *urb, struct pt_regs *regs) 723 { 724 struct edgeport_port *edge_port = (struct edgeport_port *)urb->context; 725 struct tty_struct *tty; 726 int status = urb->status; 727 728 dbg("%s", __FUNCTION__); 729 730 CmdUrbs--; 731 dbg("%s - FREE URB %p (outstanding %d)", __FUNCTION__, urb, CmdUrbs); 732 733 734 /* clean up the transfer buffer */ 735 kfree(urb->transfer_buffer); 736 737 /* Free the command urb */ 738 usb_free_urb (urb); 739 740 if (status) { 741 dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, status); 742 return; 743 } 744 745 /* Get pointer to tty */ 746 tty = edge_port->port->tty; 747 748 /* tell the tty driver that something has changed */ 749 if (tty && edge_port->open) 750 tty_wakeup(tty); 751 752 /* we have completed the command */ 753 edge_port->commandPending = FALSE; 754 wake_up(&edge_port->wait_command); 755 } 756 757 758 /***************************************************************************** 759 * Driver tty interface functions 760 *****************************************************************************/ 761 762 /***************************************************************************** 763 * SerialOpen 764 * this function is called by the tty driver when a port is opened 765 * If successful, we return 0 766 * Otherwise we return a negative error number. 767 *****************************************************************************/ 768 static int edge_open (struct usb_serial_port *port, struct file * filp) 769 { 770 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 771 struct usb_serial *serial; 772 struct edgeport_serial *edge_serial; 773 int response; 774 775 dbg("%s - port %d", __FUNCTION__, port->number); 776 777 if (edge_port == NULL) 778 return -ENODEV; 779 780 if (port->tty) 781 port->tty->low_latency = low_latency; 782 783 /* see if we've set up our endpoint info yet (can't set it up in edge_startup 784 as the structures were not set up at that time.) */ 785 serial = port->serial; 786 edge_serial = usb_get_serial_data(serial); 787 if (edge_serial == NULL) { 788 return -ENODEV; 789 } 790 if (edge_serial->interrupt_in_buffer == NULL) { 791 struct usb_serial_port *port0 = serial->port[0]; 792 793 /* not set up yet, so do it now */ 794 edge_serial->interrupt_in_buffer = port0->interrupt_in_buffer; 795 edge_serial->interrupt_in_endpoint = port0->interrupt_in_endpointAddress; 796 edge_serial->interrupt_read_urb = port0->interrupt_in_urb; 797 edge_serial->bulk_in_buffer = port0->bulk_in_buffer; 798 edge_serial->bulk_in_endpoint = port0->bulk_in_endpointAddress; 799 edge_serial->read_urb = port0->read_urb; 800 edge_serial->bulk_out_endpoint = port0->bulk_out_endpointAddress; 801 802 /* set up our interrupt urb */ 803 usb_fill_int_urb(edge_serial->interrupt_read_urb, 804 serial->dev, 805 usb_rcvintpipe(serial->dev, 806 port0->interrupt_in_endpointAddress), 807 port0->interrupt_in_buffer, 808 edge_serial->interrupt_read_urb->transfer_buffer_length, 809 edge_interrupt_callback, edge_serial, 810 edge_serial->interrupt_read_urb->interval); 811 812 /* set up our bulk in urb */ 813 usb_fill_bulk_urb(edge_serial->read_urb, serial->dev, 814 usb_rcvbulkpipe(serial->dev, 815 port0->bulk_in_endpointAddress), 816 port0->bulk_in_buffer, 817 edge_serial->read_urb->transfer_buffer_length, 818 edge_bulk_in_callback, edge_serial); 819 edge_serial->read_in_progress = FALSE; 820 821 /* start interrupt read for this edgeport 822 * this interrupt will continue as long as the edgeport is connected */ 823 response = usb_submit_urb (edge_serial->interrupt_read_urb, GFP_KERNEL); 824 if (response) { 825 dev_err(&port->dev, "%s - Error %d submitting control urb\n", __FUNCTION__, response); 826 } 827 } 828 829 /* initialize our wait queues */ 830 init_waitqueue_head(&edge_port->wait_open); 831 init_waitqueue_head(&edge_port->wait_chase); 832 init_waitqueue_head(&edge_port->delta_msr_wait); 833 init_waitqueue_head(&edge_port->wait_command); 834 835 /* initialize our icount structure */ 836 memset (&(edge_port->icount), 0x00, sizeof(edge_port->icount)); 837 838 /* initialize our port settings */ 839 edge_port->txCredits = 0; /* Can't send any data yet */ 840 edge_port->shadowMCR = MCR_MASTER_IE; /* Must always set this bit to enable ints! */ 841 edge_port->chaseResponsePending = FALSE; 842 843 /* send a open port command */ 844 edge_port->openPending = TRUE; 845 edge_port->open = FALSE; 846 response = send_iosp_ext_cmd (edge_port, IOSP_CMD_OPEN_PORT, 0); 847 848 if (response < 0) { 849 dev_err(&port->dev, "%s - error sending open port command\n", __FUNCTION__); 850 edge_port->openPending = FALSE; 851 return -ENODEV; 852 } 853 854 /* now wait for the port to be completely opened */ 855 wait_event_timeout(edge_port->wait_open, (edge_port->openPending != TRUE), OPEN_TIMEOUT); 856 857 if (edge_port->open == FALSE) { 858 /* open timed out */ 859 dbg("%s - open timedout", __FUNCTION__); 860 edge_port->openPending = FALSE; 861 return -ENODEV; 862 } 863 864 /* create the txfifo */ 865 edge_port->txfifo.head = 0; 866 edge_port->txfifo.tail = 0; 867 edge_port->txfifo.count = 0; 868 edge_port->txfifo.size = edge_port->maxTxCredits; 869 edge_port->txfifo.fifo = kmalloc (edge_port->maxTxCredits, GFP_KERNEL); 870 871 if (!edge_port->txfifo.fifo) { 872 dbg("%s - no memory", __FUNCTION__); 873 edge_close (port, filp); 874 return -ENOMEM; 875 } 876 877 /* Allocate a URB for the write */ 878 edge_port->write_urb = usb_alloc_urb (0, GFP_KERNEL); 879 edge_port->write_in_progress = FALSE; 880 881 if (!edge_port->write_urb) { 882 dbg("%s - no memory", __FUNCTION__); 883 edge_close (port, filp); 884 return -ENOMEM; 885 } 886 887 dbg("%s(%d) - Initialize TX fifo to %d bytes", __FUNCTION__, port->number, edge_port->maxTxCredits); 888 889 dbg("%s exited", __FUNCTION__); 890 891 return 0; 892 } 893 894 895 /************************************************************************ 896 * 897 * block_until_chase_response 898 * 899 * This function will block the close until one of the following: 900 * 1. Response to our Chase comes from Edgeport 901 * 2. A timout of 10 seconds without activity has expired 902 * (1K of Edgeport data @ 2400 baud ==> 4 sec to empty) 903 * 904 ************************************************************************/ 905 static void block_until_chase_response(struct edgeport_port *edge_port) 906 { 907 DEFINE_WAIT(wait); 908 __u16 lastCredits; 909 int timeout = 1*HZ; 910 int loop = 10; 911 912 while (1) { 913 // Save Last credits 914 lastCredits = edge_port->txCredits; 915 916 // Did we get our Chase response 917 if (edge_port->chaseResponsePending == FALSE) { 918 dbg("%s - Got Chase Response", __FUNCTION__); 919 920 // did we get all of our credit back? 921 if (edge_port->txCredits == edge_port->maxTxCredits ) { 922 dbg("%s - Got all credits", __FUNCTION__); 923 return; 924 } 925 } 926 927 // Block the thread for a while 928 prepare_to_wait(&edge_port->wait_chase, &wait, TASK_UNINTERRUPTIBLE); 929 schedule_timeout(timeout); 930 finish_wait(&edge_port->wait_chase, &wait); 931 932 if (lastCredits == edge_port->txCredits) { 933 // No activity.. count down. 934 loop--; 935 if (loop == 0) { 936 edge_port->chaseResponsePending = FALSE; 937 dbg("%s - Chase TIMEOUT", __FUNCTION__); 938 return; 939 } 940 } else { 941 // Reset timout value back to 10 seconds 942 dbg("%s - Last %d, Current %d", __FUNCTION__, lastCredits, edge_port->txCredits); 943 loop = 10; 944 } 945 } 946 } 947 948 949 /************************************************************************ 950 * 951 * block_until_tx_empty 952 * 953 * This function will block the close until one of the following: 954 * 1. TX count are 0 955 * 2. The edgeport has stopped 956 * 3. A timout of 3 seconds without activity has expired 957 * 958 ************************************************************************/ 959 static void block_until_tx_empty (struct edgeport_port *edge_port) 960 { 961 DEFINE_WAIT(wait); 962 struct TxFifo *fifo = &edge_port->txfifo; 963 __u32 lastCount; 964 int timeout = HZ/10; 965 int loop = 30; 966 967 while (1) { 968 // Save Last count 969 lastCount = fifo->count; 970 971 // Is the Edgeport Buffer empty? 972 if (lastCount == 0) { 973 dbg("%s - TX Buffer Empty", __FUNCTION__); 974 return; 975 } 976 977 // Block the thread for a while 978 prepare_to_wait (&edge_port->wait_chase, &wait, TASK_UNINTERRUPTIBLE); 979 schedule_timeout(timeout); 980 finish_wait(&edge_port->wait_chase, &wait); 981 982 dbg("%s wait", __FUNCTION__); 983 984 if (lastCount == fifo->count) { 985 // No activity.. count down. 986 loop--; 987 if (loop == 0) { 988 dbg("%s - TIMEOUT", __FUNCTION__); 989 return; 990 } 991 } else { 992 // Reset timout value back to seconds 993 loop = 30; 994 } 995 } 996 } 997 998 999 /***************************************************************************** 1000 * edge_close 1001 * this function is called by the tty driver when a port is closed 1002 *****************************************************************************/ 1003 static void edge_close (struct usb_serial_port *port, struct file * filp) 1004 { 1005 struct edgeport_serial *edge_serial; 1006 struct edgeport_port *edge_port; 1007 int status; 1008 1009 dbg("%s - port %d", __FUNCTION__, port->number); 1010 1011 edge_serial = usb_get_serial_data(port->serial); 1012 edge_port = usb_get_serial_port_data(port); 1013 if ((edge_serial == NULL) || (edge_port == NULL)) 1014 return; 1015 1016 // block until tx is empty 1017 block_until_tx_empty(edge_port); 1018 1019 edge_port->closePending = TRUE; 1020 1021 /* flush and chase */ 1022 edge_port->chaseResponsePending = TRUE; 1023 1024 dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__); 1025 status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0); 1026 if (status == 0) { 1027 // block until chase finished 1028 block_until_chase_response(edge_port); 1029 } else { 1030 edge_port->chaseResponsePending = FALSE; 1031 } 1032 1033 /* close the port */ 1034 dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __FUNCTION__); 1035 send_iosp_ext_cmd (edge_port, IOSP_CMD_CLOSE_PORT, 0); 1036 1037 //port->close = TRUE; 1038 edge_port->closePending = FALSE; 1039 edge_port->open = FALSE; 1040 edge_port->openPending = FALSE; 1041 1042 if (edge_port->write_urb) { 1043 usb_kill_urb(edge_port->write_urb); 1044 } 1045 1046 if (edge_port->write_urb) { 1047 /* if this urb had a transfer buffer already (old transfer) free it */ 1048 kfree(edge_port->write_urb->transfer_buffer); 1049 usb_free_urb(edge_port->write_urb); 1050 edge_port->write_urb = NULL; 1051 } 1052 kfree(edge_port->txfifo.fifo); 1053 edge_port->txfifo.fifo = NULL; 1054 1055 dbg("%s exited", __FUNCTION__); 1056 } 1057 1058 /***************************************************************************** 1059 * SerialWrite 1060 * this function is called by the tty driver when data should be written to 1061 * the port. 1062 * If successful, we return the number of bytes written, otherwise we return 1063 * a negative error number. 1064 *****************************************************************************/ 1065 static int edge_write (struct usb_serial_port *port, const unsigned char *data, int count) 1066 { 1067 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1068 struct TxFifo *fifo; 1069 int copySize; 1070 int bytesleft; 1071 int firsthalf; 1072 int secondhalf; 1073 unsigned long flags; 1074 1075 dbg("%s - port %d", __FUNCTION__, port->number); 1076 1077 if (edge_port == NULL) 1078 return -ENODEV; 1079 1080 // get a pointer to the Tx fifo 1081 fifo = &edge_port->txfifo; 1082 1083 spin_lock_irqsave(&edge_port->ep_lock, flags); 1084 1085 // calculate number of bytes to put in fifo 1086 copySize = min ((unsigned int)count, (edge_port->txCredits - fifo->count)); 1087 1088 dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes", __FUNCTION__, 1089 port->number, count, edge_port->txCredits - fifo->count, copySize); 1090 1091 /* catch writes of 0 bytes which the tty driver likes to give us, and when txCredits is empty */ 1092 if (copySize == 0) { 1093 dbg("%s - copySize = Zero", __FUNCTION__); 1094 goto finish_write; 1095 } 1096 1097 // queue the data 1098 // since we can never overflow the buffer we do not have to check for full condition 1099 1100 // the copy is done is two parts -- first fill to the end of the buffer 1101 // then copy the reset from the start of the buffer 1102 1103 bytesleft = fifo->size - fifo->head; 1104 firsthalf = min (bytesleft, copySize); 1105 dbg("%s - copy %d bytes of %d into fifo ", __FUNCTION__, firsthalf, bytesleft); 1106 1107 /* now copy our data */ 1108 memcpy(&fifo->fifo[fifo->head], data, firsthalf); 1109 usb_serial_debug_data(debug, &port->dev, __FUNCTION__, firsthalf, &fifo->fifo[fifo->head]); 1110 1111 // update the index and size 1112 fifo->head += firsthalf; 1113 fifo->count += firsthalf; 1114 1115 // wrap the index 1116 if (fifo->head == fifo->size) { 1117 fifo->head = 0; 1118 } 1119 1120 secondhalf = copySize-firsthalf; 1121 1122 if (secondhalf) { 1123 dbg("%s - copy rest of data %d", __FUNCTION__, secondhalf); 1124 memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf); 1125 usb_serial_debug_data(debug, &port->dev, __FUNCTION__, secondhalf, &fifo->fifo[fifo->head]); 1126 // update the index and size 1127 fifo->count += secondhalf; 1128 fifo->head += secondhalf; 1129 // No need to check for wrap since we can not get to end of fifo in this part 1130 } 1131 1132 finish_write: 1133 spin_unlock_irqrestore(&edge_port->ep_lock, flags); 1134 1135 send_more_port_data((struct edgeport_serial *)usb_get_serial_data(port->serial), edge_port); 1136 1137 dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __FUNCTION__, copySize, edge_port->txCredits, fifo->count); 1138 1139 return copySize; 1140 } 1141 1142 1143 /************************************************************************ 1144 * 1145 * send_more_port_data() 1146 * 1147 * This routine attempts to write additional UART transmit data 1148 * to a port over the USB bulk pipe. It is called (1) when new 1149 * data has been written to a port's TxBuffer from higher layers 1150 * (2) when the peripheral sends us additional TxCredits indicating 1151 * that it can accept more Tx data for a given port; and (3) when 1152 * a bulk write completes successfully and we want to see if we 1153 * can transmit more. 1154 * 1155 ************************************************************************/ 1156 static void send_more_port_data(struct edgeport_serial *edge_serial, struct edgeport_port *edge_port) 1157 { 1158 struct TxFifo *fifo = &edge_port->txfifo; 1159 struct urb *urb; 1160 unsigned char *buffer; 1161 int status; 1162 int count; 1163 int bytesleft; 1164 int firsthalf; 1165 int secondhalf; 1166 unsigned long flags; 1167 1168 dbg("%s(%d)", __FUNCTION__, edge_port->port->number); 1169 1170 spin_lock_irqsave(&edge_port->ep_lock, flags); 1171 1172 if (edge_port->write_in_progress || 1173 !edge_port->open || 1174 (fifo->count == 0)) { 1175 dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d", __FUNCTION__, edge_port->port->number, fifo->count, edge_port->write_in_progress); 1176 goto exit_send; 1177 } 1178 1179 // since the amount of data in the fifo will always fit into the 1180 // edgeport buffer we do not need to check the write length 1181 1182 // Do we have enough credits for this port to make it worthwhile 1183 // to bother queueing a write. If it's too small, say a few bytes, 1184 // it's better to wait for more credits so we can do a larger 1185 // write. 1186 if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits,EDGE_FW_BULK_MAX_PACKET_SIZE)) { 1187 dbg("%s(%d) Not enough credit - fifo %d TxCredit %d", __FUNCTION__, edge_port->port->number, fifo->count, edge_port->txCredits ); 1188 goto exit_send; 1189 } 1190 1191 // lock this write 1192 edge_port->write_in_progress = TRUE; 1193 1194 // get a pointer to the write_urb 1195 urb = edge_port->write_urb; 1196 1197 /* make sure transfer buffer is freed */ 1198 kfree(urb->transfer_buffer); 1199 urb->transfer_buffer = NULL; 1200 1201 /* build the data header for the buffer and port that we are about to send out */ 1202 count = fifo->count; 1203 buffer = kmalloc (count+2, GFP_ATOMIC); 1204 if (buffer == NULL) { 1205 dev_err(&edge_port->port->dev, "%s - no more kernel memory...\n", __FUNCTION__); 1206 edge_port->write_in_progress = FALSE; 1207 goto exit_send; 1208 } 1209 buffer[0] = IOSP_BUILD_DATA_HDR1 (edge_port->port->number - edge_port->port->serial->minor, count); 1210 buffer[1] = IOSP_BUILD_DATA_HDR2 (edge_port->port->number - edge_port->port->serial->minor, count); 1211 1212 /* now copy our data */ 1213 bytesleft = fifo->size - fifo->tail; 1214 firsthalf = min (bytesleft, count); 1215 memcpy(&buffer[2], &fifo->fifo[fifo->tail], firsthalf); 1216 fifo->tail += firsthalf; 1217 fifo->count -= firsthalf; 1218 if (fifo->tail == fifo->size) { 1219 fifo->tail = 0; 1220 } 1221 1222 secondhalf = count-firsthalf; 1223 if (secondhalf) { 1224 memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail], secondhalf); 1225 fifo->tail += secondhalf; 1226 fifo->count -= secondhalf; 1227 } 1228 1229 if (count) 1230 usb_serial_debug_data(debug, &edge_port->port->dev, __FUNCTION__, count, &buffer[2]); 1231 1232 /* fill up the urb with all of our data and submit it */ 1233 usb_fill_bulk_urb (urb, edge_serial->serial->dev, 1234 usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint), 1235 buffer, count+2, edge_bulk_out_data_callback, edge_port); 1236 1237 /* decrement the number of credits we have by the number we just sent */ 1238 edge_port->txCredits -= count; 1239 edge_port->icount.tx += count; 1240 1241 urb->dev = edge_serial->serial->dev; 1242 status = usb_submit_urb(urb, GFP_ATOMIC); 1243 if (status) { 1244 /* something went wrong */ 1245 dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", __FUNCTION__, status); 1246 edge_port->write_in_progress = FALSE; 1247 1248 /* revert the credits as something bad happened. */ 1249 edge_port->txCredits += count; 1250 edge_port->icount.tx -= count; 1251 } 1252 dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d", __FUNCTION__, count, edge_port->txCredits, fifo->count); 1253 1254 exit_send: 1255 spin_unlock_irqrestore(&edge_port->ep_lock, flags); 1256 } 1257 1258 1259 /***************************************************************************** 1260 * edge_write_room 1261 * this function is called by the tty driver when it wants to know how many 1262 * bytes of data we can accept for a specific port. 1263 * If successful, we return the amount of room that we have for this port 1264 * (the txCredits), 1265 * Otherwise we return a negative error number. 1266 *****************************************************************************/ 1267 static int edge_write_room (struct usb_serial_port *port) 1268 { 1269 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1270 int room; 1271 unsigned long flags; 1272 1273 dbg("%s", __FUNCTION__); 1274 1275 if (edge_port == NULL) 1276 return -ENODEV; 1277 if (edge_port->closePending == TRUE) 1278 return -ENODEV; 1279 1280 dbg("%s - port %d", __FUNCTION__, port->number); 1281 1282 if (!edge_port->open) { 1283 dbg("%s - port not opened", __FUNCTION__); 1284 return -EINVAL; 1285 } 1286 1287 // total of both buffers is still txCredit 1288 spin_lock_irqsave(&edge_port->ep_lock, flags); 1289 room = edge_port->txCredits - edge_port->txfifo.count; 1290 spin_unlock_irqrestore(&edge_port->ep_lock, flags); 1291 1292 dbg("%s - returns %d", __FUNCTION__, room); 1293 return room; 1294 } 1295 1296 1297 /***************************************************************************** 1298 * edge_chars_in_buffer 1299 * this function is called by the tty driver when it wants to know how many 1300 * bytes of data we currently have outstanding in the port (data that has 1301 * been written, but hasn't made it out the port yet) 1302 * If successful, we return the number of bytes left to be written in the 1303 * system, 1304 * Otherwise we return a negative error number. 1305 *****************************************************************************/ 1306 static int edge_chars_in_buffer (struct usb_serial_port *port) 1307 { 1308 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1309 int num_chars; 1310 unsigned long flags; 1311 1312 dbg("%s", __FUNCTION__); 1313 1314 if (edge_port == NULL) 1315 return -ENODEV; 1316 if (edge_port->closePending == TRUE) 1317 return -ENODEV; 1318 1319 if (!edge_port->open) { 1320 dbg("%s - port not opened", __FUNCTION__); 1321 return -EINVAL; 1322 } 1323 1324 spin_lock_irqsave(&edge_port->ep_lock, flags); 1325 num_chars = edge_port->maxTxCredits - edge_port->txCredits + edge_port->txfifo.count; 1326 spin_unlock_irqrestore(&edge_port->ep_lock, flags); 1327 if (num_chars) { 1328 dbg("%s(port %d) - returns %d", __FUNCTION__, port->number, num_chars); 1329 } 1330 1331 return num_chars; 1332 } 1333 1334 1335 /***************************************************************************** 1336 * SerialThrottle 1337 * this function is called by the tty driver when it wants to stop the data 1338 * being read from the port. 1339 *****************************************************************************/ 1340 static void edge_throttle (struct usb_serial_port *port) 1341 { 1342 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1343 struct tty_struct *tty; 1344 int status; 1345 1346 dbg("%s - port %d", __FUNCTION__, port->number); 1347 1348 if (edge_port == NULL) 1349 return; 1350 1351 if (!edge_port->open) { 1352 dbg("%s - port not opened", __FUNCTION__); 1353 return; 1354 } 1355 1356 tty = port->tty; 1357 if (!tty) { 1358 dbg ("%s - no tty available", __FUNCTION__); 1359 return; 1360 } 1361 1362 /* if we are implementing XON/XOFF, send the stop character */ 1363 if (I_IXOFF(tty)) { 1364 unsigned char stop_char = STOP_CHAR(tty); 1365 status = edge_write (port, &stop_char, 1); 1366 if (status <= 0) { 1367 return; 1368 } 1369 } 1370 1371 /* if we are implementing RTS/CTS, toggle that line */ 1372 if (tty->termios->c_cflag & CRTSCTS) { 1373 edge_port->shadowMCR &= ~MCR_RTS; 1374 status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); 1375 if (status != 0) { 1376 return; 1377 } 1378 } 1379 1380 return; 1381 } 1382 1383 1384 /***************************************************************************** 1385 * edge_unthrottle 1386 * this function is called by the tty driver when it wants to resume the data 1387 * being read from the port (called after SerialThrottle is called) 1388 *****************************************************************************/ 1389 static void edge_unthrottle (struct usb_serial_port *port) 1390 { 1391 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1392 struct tty_struct *tty; 1393 int status; 1394 1395 dbg("%s - port %d", __FUNCTION__, port->number); 1396 1397 if (edge_port == NULL) 1398 return; 1399 1400 if (!edge_port->open) { 1401 dbg("%s - port not opened", __FUNCTION__); 1402 return; 1403 } 1404 1405 tty = port->tty; 1406 if (!tty) { 1407 dbg ("%s - no tty available", __FUNCTION__); 1408 return; 1409 } 1410 1411 /* if we are implementing XON/XOFF, send the start character */ 1412 if (I_IXOFF(tty)) { 1413 unsigned char start_char = START_CHAR(tty); 1414 status = edge_write (port, &start_char, 1); 1415 if (status <= 0) { 1416 return; 1417 } 1418 } 1419 1420 /* if we are implementing RTS/CTS, toggle that line */ 1421 if (tty->termios->c_cflag & CRTSCTS) { 1422 edge_port->shadowMCR |= MCR_RTS; 1423 status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); 1424 if (status != 0) { 1425 return; 1426 } 1427 } 1428 1429 return; 1430 } 1431 1432 1433 /***************************************************************************** 1434 * SerialSetTermios 1435 * this function is called by the tty driver when it wants to change the termios structure 1436 *****************************************************************************/ 1437 static void edge_set_termios (struct usb_serial_port *port, struct termios *old_termios) 1438 { 1439 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1440 struct tty_struct *tty = port->tty; 1441 unsigned int cflag; 1442 1443 if (!port->tty || !port->tty->termios) { 1444 dbg ("%s - no tty or termios", __FUNCTION__); 1445 return; 1446 } 1447 1448 cflag = tty->termios->c_cflag; 1449 /* check that they really want us to change something */ 1450 if (old_termios) { 1451 if (cflag == old_termios->c_cflag && 1452 tty->termios->c_iflag == old_termios->c_iflag) { 1453 dbg("%s - nothing to change", __FUNCTION__); 1454 return; 1455 } 1456 } 1457 1458 dbg("%s - clfag %08x iflag %08x", __FUNCTION__, 1459 tty->termios->c_cflag, tty->termios->c_iflag); 1460 if (old_termios) { 1461 dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__, 1462 old_termios->c_cflag, old_termios->c_iflag); 1463 } 1464 1465 dbg("%s - port %d", __FUNCTION__, port->number); 1466 1467 if (edge_port == NULL) 1468 return; 1469 1470 if (!edge_port->open) { 1471 dbg("%s - port not opened", __FUNCTION__); 1472 return; 1473 } 1474 1475 /* change the port settings to the new ones specified */ 1476 change_port_settings (edge_port, old_termios); 1477 1478 return; 1479 } 1480 1481 1482 /***************************************************************************** 1483 * get_lsr_info - get line status register info 1484 * 1485 * Purpose: Let user call ioctl() to get info when the UART physically 1486 * is emptied. On bus types like RS485, the transmitter must 1487 * release the bus after transmitting. This must be done when 1488 * the transmit shift register is empty, not be done when the 1489 * transmit holding register is empty. This functionality 1490 * allows an RS485 driver to be written in user space. 1491 *****************************************************************************/ 1492 static int get_lsr_info(struct edgeport_port *edge_port, unsigned int __user *value) 1493 { 1494 unsigned int result = 0; 1495 unsigned long flags; 1496 1497 spin_lock_irqsave(&edge_port->ep_lock, flags); 1498 if (edge_port->maxTxCredits == edge_port->txCredits && 1499 edge_port->txfifo.count == 0) { 1500 dbg("%s -- Empty", __FUNCTION__); 1501 result = TIOCSER_TEMT; 1502 } 1503 spin_unlock_irqrestore(&edge_port->ep_lock, flags); 1504 1505 if (copy_to_user(value, &result, sizeof(int))) 1506 return -EFAULT; 1507 return 0; 1508 } 1509 1510 static int get_number_bytes_avail(struct edgeport_port *edge_port, unsigned int __user *value) 1511 { 1512 unsigned int result = 0; 1513 struct tty_struct *tty = edge_port->port->tty; 1514 1515 if (!tty) 1516 return -ENOIOCTLCMD; 1517 1518 result = tty->read_cnt; 1519 1520 dbg("%s(%d) = %d", __FUNCTION__, edge_port->port->number, result); 1521 if (copy_to_user(value, &result, sizeof(int))) 1522 return -EFAULT; 1523 //return 0; 1524 return -ENOIOCTLCMD; 1525 } 1526 1527 static int edge_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear) 1528 { 1529 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1530 unsigned int mcr; 1531 1532 dbg("%s - port %d", __FUNCTION__, port->number); 1533 1534 mcr = edge_port->shadowMCR; 1535 if (set & TIOCM_RTS) 1536 mcr |= MCR_RTS; 1537 if (set & TIOCM_DTR) 1538 mcr |= MCR_DTR; 1539 if (set & TIOCM_LOOP) 1540 mcr |= MCR_LOOPBACK; 1541 1542 if (clear & TIOCM_RTS) 1543 mcr &= ~MCR_RTS; 1544 if (clear & TIOCM_DTR) 1545 mcr &= ~MCR_DTR; 1546 if (clear & TIOCM_LOOP) 1547 mcr &= ~MCR_LOOPBACK; 1548 1549 edge_port->shadowMCR = mcr; 1550 1551 send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); 1552 1553 return 0; 1554 } 1555 1556 static int edge_tiocmget(struct usb_serial_port *port, struct file *file) 1557 { 1558 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1559 unsigned int result = 0; 1560 unsigned int msr; 1561 unsigned int mcr; 1562 1563 dbg("%s - port %d", __FUNCTION__, port->number); 1564 1565 msr = edge_port->shadowMSR; 1566 mcr = edge_port->shadowMCR; 1567 result = ((mcr & MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */ 1568 | ((mcr & MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */ 1569 | ((msr & EDGEPORT_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */ 1570 | ((msr & EDGEPORT_MSR_CD) ? TIOCM_CAR: 0) /* 0x040 */ 1571 | ((msr & EDGEPORT_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */ 1572 | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ 1573 1574 1575 dbg("%s -- %x", __FUNCTION__, result); 1576 1577 return result; 1578 } 1579 1580 static int get_serial_info(struct edgeport_port *edge_port, struct serial_struct __user *retinfo) 1581 { 1582 struct serial_struct tmp; 1583 1584 if (!retinfo) 1585 return -EFAULT; 1586 1587 memset(&tmp, 0, sizeof(tmp)); 1588 1589 tmp.type = PORT_16550A; 1590 tmp.line = edge_port->port->serial->minor; 1591 tmp.port = edge_port->port->number; 1592 tmp.irq = 0; 1593 tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; 1594 tmp.xmit_fifo_size = edge_port->maxTxCredits; 1595 tmp.baud_base = 9600; 1596 tmp.close_delay = 5*HZ; 1597 tmp.closing_wait = 30*HZ; 1598 // tmp.custom_divisor = state->custom_divisor; 1599 // tmp.hub6 = state->hub6; 1600 // tmp.io_type = state->io_type; 1601 1602 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) 1603 return -EFAULT; 1604 return 0; 1605 } 1606 1607 1608 1609 /***************************************************************************** 1610 * SerialIoctl 1611 * this function handles any ioctl calls to the driver 1612 *****************************************************************************/ 1613 static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg) 1614 { 1615 DEFINE_WAIT(wait); 1616 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1617 struct async_icount cnow; 1618 struct async_icount cprev; 1619 struct serial_icounter_struct icount; 1620 1621 dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd); 1622 1623 switch (cmd) { 1624 // return number of bytes available 1625 case TIOCINQ: 1626 dbg("%s (%d) TIOCINQ", __FUNCTION__, port->number); 1627 return get_number_bytes_avail(edge_port, (unsigned int __user *) arg); 1628 break; 1629 1630 case TIOCSERGETLSR: 1631 dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number); 1632 return get_lsr_info(edge_port, (unsigned int __user *) arg); 1633 return 0; 1634 1635 case TIOCGSERIAL: 1636 dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number); 1637 return get_serial_info(edge_port, (struct serial_struct __user *) arg); 1638 1639 case TIOCSSERIAL: 1640 dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number); 1641 break; 1642 1643 case TIOCMIWAIT: 1644 dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number); 1645 cprev = edge_port->icount; 1646 while (1) { 1647 prepare_to_wait(&edge_port->delta_msr_wait, &wait, TASK_INTERRUPTIBLE); 1648 schedule(); 1649 finish_wait(&edge_port->delta_msr_wait, &wait); 1650 /* see if a signal did it */ 1651 if (signal_pending(current)) 1652 return -ERESTARTSYS; 1653 cnow = edge_port->icount; 1654 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && 1655 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) 1656 return -EIO; /* no change => error */ 1657 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || 1658 ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || 1659 ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || 1660 ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { 1661 return 0; 1662 } 1663 cprev = cnow; 1664 } 1665 /* NOTREACHED */ 1666 break; 1667 1668 case TIOCGICOUNT: 1669 cnow = edge_port->icount; 1670 memset(&icount, 0, sizeof(icount)); 1671 icount.cts = cnow.cts; 1672 icount.dsr = cnow.dsr; 1673 icount.rng = cnow.rng; 1674 icount.dcd = cnow.dcd; 1675 icount.rx = cnow.rx; 1676 icount.tx = cnow.tx; 1677 icount.frame = cnow.frame; 1678 icount.overrun = cnow.overrun; 1679 icount.parity = cnow.parity; 1680 icount.brk = cnow.brk; 1681 icount.buf_overrun = cnow.buf_overrun; 1682 1683 dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, port->number, icount.rx, icount.tx ); 1684 if (copy_to_user((void __user *)arg, &icount, sizeof(icount))) 1685 return -EFAULT; 1686 return 0; 1687 } 1688 1689 return -ENOIOCTLCMD; 1690 } 1691 1692 1693 /***************************************************************************** 1694 * SerialBreak 1695 * this function sends a break to the port 1696 *****************************************************************************/ 1697 static void edge_break (struct usb_serial_port *port, int break_state) 1698 { 1699 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1700 int status; 1701 1702 /* flush and chase */ 1703 edge_port->chaseResponsePending = TRUE; 1704 1705 dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__); 1706 status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0); 1707 if (status == 0) { 1708 // block until chase finished 1709 block_until_chase_response(edge_port); 1710 } else { 1711 edge_port->chaseResponsePending = FALSE; 1712 } 1713 1714 if (break_state == -1) { 1715 dbg("%s - Sending IOSP_CMD_SET_BREAK", __FUNCTION__); 1716 status = send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_BREAK, 0); 1717 } else { 1718 dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __FUNCTION__); 1719 status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CLEAR_BREAK, 0); 1720 } 1721 if (status) { 1722 dbg("%s - error sending break set/clear command.", __FUNCTION__); 1723 } 1724 1725 return; 1726 } 1727 1728 1729 /***************************************************************************** 1730 * process_rcvd_data 1731 * this function handles the data received on the bulk in pipe. 1732 *****************************************************************************/ 1733 static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned char * buffer, __u16 bufferLength) 1734 { 1735 struct usb_serial_port *port; 1736 struct edgeport_port *edge_port; 1737 struct tty_struct *tty; 1738 __u16 lastBufferLength; 1739 __u16 rxLen; 1740 1741 dbg("%s", __FUNCTION__); 1742 1743 lastBufferLength = bufferLength + 1; 1744 1745 while (bufferLength > 0) { 1746 /* failsafe incase we get a message that we don't understand */ 1747 if (lastBufferLength == bufferLength) { 1748 dbg("%s - stuck in loop, exiting it.", __FUNCTION__); 1749 break; 1750 } 1751 lastBufferLength = bufferLength; 1752 1753 switch (edge_serial->rxState) { 1754 case EXPECT_HDR1: 1755 edge_serial->rxHeader1 = *buffer; 1756 ++buffer; 1757 --bufferLength; 1758 1759 if (bufferLength == 0) { 1760 edge_serial->rxState = EXPECT_HDR2; 1761 break; 1762 } 1763 /* otherwise, drop on through */ 1764 1765 case EXPECT_HDR2: 1766 edge_serial->rxHeader2 = *buffer; 1767 ++buffer; 1768 --bufferLength; 1769 1770 dbg("%s - Hdr1=%02X Hdr2=%02X", __FUNCTION__, edge_serial->rxHeader1, edge_serial->rxHeader2); 1771 1772 // Process depending on whether this header is 1773 // data or status 1774 1775 if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) { 1776 // Decode this status header and goto EXPECT_HDR1 (if we 1777 // can process the status with only 2 bytes), or goto 1778 // EXPECT_HDR3 to get the third byte. 1779 1780 edge_serial->rxPort = IOSP_GET_HDR_PORT(edge_serial->rxHeader1); 1781 edge_serial->rxStatusCode = IOSP_GET_STATUS_CODE(edge_serial->rxHeader1); 1782 1783 if (!IOSP_STATUS_IS_2BYTE(edge_serial->rxStatusCode)) { 1784 // This status needs additional bytes. Save what we have 1785 // and then wait for more data. 1786 edge_serial->rxStatusParam = edge_serial->rxHeader2; 1787 1788 edge_serial->rxState = EXPECT_HDR3; 1789 break; 1790 } 1791 1792 // We have all the header bytes, process the status now 1793 process_rcvd_status (edge_serial, edge_serial->rxHeader2, 0); 1794 edge_serial->rxState = EXPECT_HDR1; 1795 break; 1796 } else { 1797 edge_serial->rxPort = IOSP_GET_HDR_PORT(edge_serial->rxHeader1); 1798 edge_serial->rxBytesRemaining = IOSP_GET_HDR_DATA_LEN(edge_serial->rxHeader1, edge_serial->rxHeader2); 1799 1800 dbg("%s - Data for Port %u Len %u", __FUNCTION__, edge_serial->rxPort, edge_serial->rxBytesRemaining); 1801 1802 //ASSERT( DevExt->RxPort < DevExt->NumPorts ); 1803 //ASSERT( DevExt->RxBytesRemaining < IOSP_MAX_DATA_LENGTH ); 1804 1805 if (bufferLength == 0 ) { 1806 edge_serial->rxState = EXPECT_DATA; 1807 break; 1808 } 1809 // Else, drop through 1810 } 1811 1812 case EXPECT_DATA: // Expect data 1813 1814 if (bufferLength < edge_serial->rxBytesRemaining) { 1815 rxLen = bufferLength; 1816 edge_serial->rxState = EXPECT_DATA; // Expect data to start next buffer 1817 } else { 1818 // BufLen >= RxBytesRemaining 1819 rxLen = edge_serial->rxBytesRemaining; 1820 edge_serial->rxState = EXPECT_HDR1; // Start another header next time 1821 } 1822 1823 bufferLength -= rxLen; 1824 edge_serial->rxBytesRemaining -= rxLen; 1825 1826 /* spit this data back into the tty driver if this port is open */ 1827 if (rxLen) { 1828 port = edge_serial->serial->port[edge_serial->rxPort]; 1829 edge_port = usb_get_serial_port_data(port); 1830 if (edge_port->open) { 1831 tty = edge_port->port->tty; 1832 if (tty) { 1833 dbg("%s - Sending %d bytes to TTY for port %d", __FUNCTION__, rxLen, edge_serial->rxPort); 1834 edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen); 1835 } 1836 edge_port->icount.rx += rxLen; 1837 } 1838 buffer += rxLen; 1839 } 1840 1841 break; 1842 1843 case EXPECT_HDR3: // Expect 3rd byte of status header 1844 edge_serial->rxHeader3 = *buffer; 1845 ++buffer; 1846 --bufferLength; 1847 1848 // We have all the header bytes, process the status now 1849 process_rcvd_status (edge_serial, edge_serial->rxStatusParam, edge_serial->rxHeader3); 1850 edge_serial->rxState = EXPECT_HDR1; 1851 break; 1852 1853 } 1854 } 1855 } 1856 1857 1858 /***************************************************************************** 1859 * process_rcvd_status 1860 * this function handles the any status messages received on the bulk in pipe. 1861 *****************************************************************************/ 1862 static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3) 1863 { 1864 struct usb_serial_port *port; 1865 struct edgeport_port *edge_port; 1866 __u8 code = edge_serial->rxStatusCode; 1867 1868 /* switch the port pointer to the one being currently talked about */ 1869 port = edge_serial->serial->port[edge_serial->rxPort]; 1870 edge_port = usb_get_serial_port_data(port); 1871 if (edge_port == NULL) { 1872 dev_err(&edge_serial->serial->dev->dev, "%s - edge_port == NULL for port %d\n", __FUNCTION__, edge_serial->rxPort); 1873 return; 1874 } 1875 1876 dbg("%s - port %d", __FUNCTION__, edge_serial->rxPort); 1877 1878 if (code == IOSP_EXT_STATUS) { 1879 switch (byte2) { 1880 case IOSP_EXT_STATUS_CHASE_RSP: 1881 // we want to do EXT status regardless of port open/closed 1882 dbg("%s - Port %u EXT CHASE_RSP Data = %02x", __FUNCTION__, edge_serial->rxPort, byte3 ); 1883 // Currently, the only EXT_STATUS is Chase, so process here instead of one more call 1884 // to one more subroutine. If/when more EXT_STATUS, there'll be more work to do. 1885 // Also, we currently clear flag and close the port regardless of content of above's Byte3. 1886 // We could choose to do something else when Byte3 says Timeout on Chase from Edgeport, 1887 // like wait longer in block_until_chase_response, but for now we don't. 1888 edge_port->chaseResponsePending = FALSE; 1889 wake_up (&edge_port->wait_chase); 1890 return; 1891 1892 case IOSP_EXT_STATUS_RX_CHECK_RSP: 1893 dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __FUNCTION__, edge_serial->rxPort, byte3 ); 1894 //Port->RxCheckRsp = TRUE; 1895 return; 1896 } 1897 } 1898 1899 if (code == IOSP_STATUS_OPEN_RSP) { 1900 edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3); 1901 edge_port->maxTxCredits = edge_port->txCredits; 1902 dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __FUNCTION__, edge_serial->rxPort, byte2, edge_port->txCredits); 1903 handle_new_msr (edge_port, byte2); 1904 1905 /* send the current line settings to the port so we are in sync with any further termios calls */ 1906 if (edge_port->port->tty) 1907 change_port_settings (edge_port, edge_port->port->tty->termios); 1908 1909 /* we have completed the open */ 1910 edge_port->openPending = FALSE; 1911 edge_port->open = TRUE; 1912 wake_up(&edge_port->wait_open); 1913 return; 1914 } 1915 1916 // If port is closed, silently discard all rcvd status. We can 1917 // have cases where buffered status is received AFTER the close 1918 // port command is sent to the Edgeport. 1919 if ((!edge_port->open ) || (edge_port->closePending)) { 1920 return; 1921 } 1922 1923 switch (code) { 1924 // Not currently sent by Edgeport 1925 case IOSP_STATUS_LSR: 1926 dbg("%s - Port %u LSR Status = %02x", __FUNCTION__, edge_serial->rxPort, byte2); 1927 handle_new_lsr (edge_port, FALSE, byte2, 0); 1928 break; 1929 1930 case IOSP_STATUS_LSR_DATA: 1931 dbg("%s - Port %u LSR Status = %02x, Data = %02x", __FUNCTION__, edge_serial->rxPort, byte2, byte3); 1932 // byte2 is LSR Register 1933 // byte3 is broken data byte 1934 handle_new_lsr (edge_port, TRUE, byte2, byte3); 1935 break; 1936 // 1937 // case IOSP_EXT_4_STATUS: 1938 // dbg("%s - Port %u LSR Status = %02x Data = %02x", __FUNCTION__, edge_serial->rxPort, byte2, byte3); 1939 // break; 1940 // 1941 case IOSP_STATUS_MSR: 1942 dbg("%s - Port %u MSR Status = %02x", __FUNCTION__, edge_serial->rxPort, byte2); 1943 1944 // Process this new modem status and generate appropriate 1945 // events, etc, based on the new status. This routine 1946 // also saves the MSR in Port->ShadowMsr. 1947 handle_new_msr(edge_port, byte2); 1948 break; 1949 1950 default: 1951 dbg("%s - Unrecognized IOSP status code %u\n", __FUNCTION__, code); 1952 break; 1953 } 1954 1955 return; 1956 } 1957 1958 1959 /***************************************************************************** 1960 * edge_tty_recv 1961 * this function passes data on to the tty flip buffer 1962 *****************************************************************************/ 1963 static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned char *data, int length) 1964 { 1965 int cnt; 1966 1967 do { 1968 cnt = tty_buffer_request_room(tty, length); 1969 if (cnt < length) { 1970 dev_err(dev, "%s - dropping data, %d bytes lost\n", 1971 __FUNCTION__, length - cnt); 1972 if(cnt == 0) 1973 break; 1974 } 1975 tty_insert_flip_string(tty, data, cnt); 1976 data += cnt; 1977 length -= cnt; 1978 } while (length > 0); 1979 1980 tty_flip_buffer_push(tty); 1981 } 1982 1983 1984 /***************************************************************************** 1985 * handle_new_msr 1986 * this function handles any change to the msr register for a port. 1987 *****************************************************************************/ 1988 static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) 1989 { 1990 struct async_icount *icount; 1991 1992 dbg("%s %02x", __FUNCTION__, newMsr); 1993 1994 if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { 1995 icount = &edge_port->icount; 1996 1997 /* update input line counters */ 1998 if (newMsr & EDGEPORT_MSR_DELTA_CTS) { 1999 icount->cts++; 2000 } 2001 if (newMsr & EDGEPORT_MSR_DELTA_DSR) { 2002 icount->dsr++; 2003 } 2004 if (newMsr & EDGEPORT_MSR_DELTA_CD) { 2005 icount->dcd++; 2006 } 2007 if (newMsr & EDGEPORT_MSR_DELTA_RI) { 2008 icount->rng++; 2009 } 2010 wake_up_interruptible(&edge_port->delta_msr_wait); 2011 } 2012 2013 /* Save the new modem status */ 2014 edge_port->shadowMSR = newMsr & 0xf0; 2015 2016 return; 2017 } 2018 2019 2020 /***************************************************************************** 2021 * handle_new_lsr 2022 * this function handles any change to the lsr register for a port. 2023 *****************************************************************************/ 2024 static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 lsr, __u8 data) 2025 { 2026 __u8 newLsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); 2027 struct async_icount *icount; 2028 2029 dbg("%s - %02x", __FUNCTION__, newLsr); 2030 2031 edge_port->shadowLSR = lsr; 2032 2033 if (newLsr & LSR_BREAK) { 2034 // 2035 // Parity and Framing errors only count if they 2036 // occur exclusive of a break being 2037 // received. 2038 // 2039 newLsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK); 2040 } 2041 2042 /* Place LSR data byte into Rx buffer */ 2043 if (lsrData && edge_port->port->tty) 2044 edge_tty_recv(&edge_port->port->dev, edge_port->port->tty, &data, 1); 2045 2046 /* update input line counters */ 2047 icount = &edge_port->icount; 2048 if (newLsr & LSR_BREAK) { 2049 icount->brk++; 2050 } 2051 if (newLsr & LSR_OVER_ERR) { 2052 icount->overrun++; 2053 } 2054 if (newLsr & LSR_PAR_ERR) { 2055 icount->parity++; 2056 } 2057 if (newLsr & LSR_FRM_ERR) { 2058 icount->frame++; 2059 } 2060 2061 return; 2062 } 2063 2064 2065 /**************************************************************************** 2066 * sram_write 2067 * writes a number of bytes to the Edgeport device's sram starting at the 2068 * given address. 2069 * If successful returns the number of bytes written, otherwise it returns 2070 * a negative error number of the problem. 2071 ****************************************************************************/ 2072 static int sram_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data) 2073 { 2074 int result; 2075 __u16 current_length; 2076 unsigned char *transfer_buffer; 2077 2078 dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, length); 2079 2080 transfer_buffer = kmalloc (64, GFP_KERNEL); 2081 if (!transfer_buffer) { 2082 dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 64); 2083 return -ENOMEM; 2084 } 2085 2086 /* need to split these writes up into 64 byte chunks */ 2087 result = 0; 2088 while (length > 0) { 2089 if (length > 64) { 2090 current_length = 64; 2091 } else { 2092 current_length = length; 2093 } 2094 // dbg("%s - writing %x, %x, %d", __FUNCTION__, extAddr, addr, current_length); 2095 memcpy (transfer_buffer, data, current_length); 2096 result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_RAM, 2097 0x40, addr, extAddr, transfer_buffer, current_length, 300); 2098 if (result < 0) 2099 break; 2100 length -= current_length; 2101 addr += current_length; 2102 data += current_length; 2103 } 2104 2105 kfree (transfer_buffer); 2106 return result; 2107 } 2108 2109 2110 /**************************************************************************** 2111 * rom_write 2112 * writes a number of bytes to the Edgeport device's ROM starting at the 2113 * given address. 2114 * If successful returns the number of bytes written, otherwise it returns 2115 * a negative error number of the problem. 2116 ****************************************************************************/ 2117 static int rom_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data) 2118 { 2119 int result; 2120 __u16 current_length; 2121 unsigned char *transfer_buffer; 2122 2123 // dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, length); 2124 2125 transfer_buffer = kmalloc (64, GFP_KERNEL); 2126 if (!transfer_buffer) { 2127 dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 64); 2128 return -ENOMEM; 2129 } 2130 2131 /* need to split these writes up into 64 byte chunks */ 2132 result = 0; 2133 while (length > 0) { 2134 if (length > 64) { 2135 current_length = 64; 2136 } else { 2137 current_length = length; 2138 } 2139 // dbg("%s - writing %x, %x, %d", __FUNCTION__, extAddr, addr, current_length); 2140 memcpy (transfer_buffer, data, current_length); 2141 result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_ROM, 2142 0x40, addr, extAddr, transfer_buffer, current_length, 300); 2143 if (result < 0) 2144 break; 2145 length -= current_length; 2146 addr += current_length; 2147 data += current_length; 2148 } 2149 2150 kfree (transfer_buffer); 2151 return result; 2152 } 2153 2154 2155 /**************************************************************************** 2156 * rom_read 2157 * reads a number of bytes from the Edgeport device starting at the given 2158 * address. 2159 * If successful returns the number of bytes read, otherwise it returns 2160 * a negative error number of the problem. 2161 ****************************************************************************/ 2162 static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data) 2163 { 2164 int result; 2165 __u16 current_length; 2166 unsigned char *transfer_buffer; 2167 2168 dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, length); 2169 2170 transfer_buffer = kmalloc (64, GFP_KERNEL); 2171 if (!transfer_buffer) { 2172 dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 64); 2173 return -ENOMEM; 2174 } 2175 2176 /* need to split these reads up into 64 byte chunks */ 2177 result = 0; 2178 while (length > 0) { 2179 if (length > 64) { 2180 current_length = 64; 2181 } else { 2182 current_length = length; 2183 } 2184 // dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, current_length); 2185 result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQUEST_ION_READ_ROM, 2186 0xC0, addr, extAddr, transfer_buffer, current_length, 300); 2187 if (result < 0) 2188 break; 2189 memcpy (data, transfer_buffer, current_length); 2190 length -= current_length; 2191 addr += current_length; 2192 data += current_length; 2193 } 2194 2195 kfree (transfer_buffer); 2196 return result; 2197 } 2198 2199 2200 /**************************************************************************** 2201 * send_iosp_ext_cmd 2202 * Is used to send a IOSP message to the Edgeport device 2203 ****************************************************************************/ 2204 static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u8 param) 2205 { 2206 unsigned char *buffer; 2207 unsigned char *currentCommand; 2208 int length = 0; 2209 int status = 0; 2210 2211 dbg("%s - %d, %d", __FUNCTION__, command, param); 2212 2213 buffer = kmalloc (10, GFP_ATOMIC); 2214 if (!buffer) { 2215 dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 10); 2216 return -ENOMEM; 2217 } 2218 2219 currentCommand = buffer; 2220 2221 MAKE_CMD_EXT_CMD (¤tCommand, &length, 2222 edge_port->port->number - edge_port->port->serial->minor, 2223 command, param); 2224 2225 status = write_cmd_usb (edge_port, buffer, length); 2226 if (status) { 2227 /* something bad happened, let's free up the memory */ 2228 kfree(buffer); 2229 } 2230 2231 return status; 2232 } 2233 2234 2235 /***************************************************************************** 2236 * write_cmd_usb 2237 * this function writes the given buffer out to the bulk write endpoint. 2238 *****************************************************************************/ 2239 static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer, int length) 2240 { 2241 struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); 2242 int status = 0; 2243 struct urb *urb; 2244 int timeout; 2245 2246 usb_serial_debug_data(debug, &edge_port->port->dev, __FUNCTION__, length, buffer); 2247 2248 /* Allocate our next urb */ 2249 urb = usb_alloc_urb (0, GFP_ATOMIC); 2250 if (!urb) 2251 return -ENOMEM; 2252 2253 CmdUrbs++; 2254 dbg("%s - ALLOCATE URB %p (outstanding %d)", __FUNCTION__, urb, CmdUrbs); 2255 2256 usb_fill_bulk_urb (urb, edge_serial->serial->dev, 2257 usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint), 2258 buffer, length, edge_bulk_out_cmd_callback, edge_port); 2259 2260 edge_port->commandPending = TRUE; 2261 status = usb_submit_urb(urb, GFP_ATOMIC); 2262 2263 if (status) { 2264 /* something went wrong */ 2265 dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write command) failed, status = %d\n", __FUNCTION__, status); 2266 usb_kill_urb(urb); 2267 usb_free_urb(urb); 2268 CmdUrbs--; 2269 return status; 2270 } 2271 2272 // wait for command to finish 2273 timeout = COMMAND_TIMEOUT; 2274 #if 0 2275 wait_event (&edge_port->wait_command, (edge_port->commandPending == FALSE)); 2276 2277 if (edge_port->commandPending == TRUE) { 2278 /* command timed out */ 2279 dbg("%s - command timed out", __FUNCTION__); 2280 status = -EINVAL; 2281 } 2282 #endif 2283 return status; 2284 } 2285 2286 2287 /***************************************************************************** 2288 * send_cmd_write_baud_rate 2289 * this function sends the proper command to change the baud rate of the 2290 * specified port. 2291 *****************************************************************************/ 2292 static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRate) 2293 { 2294 unsigned char *cmdBuffer; 2295 unsigned char *currCmd; 2296 int cmdLen = 0; 2297 int divisor; 2298 int status; 2299 unsigned char number = edge_port->port->number - edge_port->port->serial->minor; 2300 2301 dbg("%s - port = %d, baud = %d", __FUNCTION__, edge_port->port->number, baudRate); 2302 2303 status = calc_baud_rate_divisor (baudRate, &divisor); 2304 if (status) { 2305 dev_err(&edge_port->port->dev, "%s - bad baud rate\n", __FUNCTION__); 2306 return status; 2307 } 2308 2309 // Alloc memory for the string of commands. 2310 cmdBuffer = kmalloc (0x100, GFP_ATOMIC); 2311 if (!cmdBuffer) { 2312 dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 0x100); 2313 return -ENOMEM; 2314 } 2315 currCmd = cmdBuffer; 2316 2317 // Enable access to divisor latch 2318 MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE ); 2319 2320 // Write the divisor itself 2321 MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, DLL, LOW8 (divisor) ); 2322 MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, DLM, HIGH8(divisor) ); 2323 2324 // Restore original value to disable access to divisor latch 2325 MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, LCR, edge_port->shadowLCR); 2326 2327 status = write_cmd_usb(edge_port, cmdBuffer, cmdLen ); 2328 if (status) { 2329 /* something bad happened, let's free up the memory */ 2330 kfree (cmdBuffer); 2331 } 2332 2333 return status; 2334 } 2335 2336 2337 /***************************************************************************** 2338 * calc_baud_rate_divisor 2339 * this function calculates the proper baud rate divisor for the specified 2340 * baud rate. 2341 *****************************************************************************/ 2342 static int calc_baud_rate_divisor (int baudrate, int *divisor) 2343 { 2344 int i; 2345 __u16 custom; 2346 2347 2348 dbg("%s - %d", __FUNCTION__, baudrate); 2349 2350 for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { 2351 if ( divisor_table[i].BaudRate == baudrate ) { 2352 *divisor = divisor_table[i].Divisor; 2353 return 0; 2354 } 2355 } 2356 2357 // We have tried all of the standard baud rates 2358 // lets try to calculate the divisor for this baud rate 2359 // Make sure the baud rate is reasonable 2360 if (baudrate > 50 && baudrate < 230400) { 2361 // get divisor 2362 custom = (__u16)((230400L + baudrate/2) / baudrate); 2363 2364 *divisor = custom; 2365 2366 dbg("%s - Baud %d = %d\n", __FUNCTION__, baudrate, custom); 2367 return 0; 2368 } 2369 2370 return -1; 2371 } 2372 2373 2374 /***************************************************************************** 2375 * send_cmd_write_uart_register 2376 * this function builds up a uart register message and sends to to the device. 2377 *****************************************************************************/ 2378 static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 regNum, __u8 regValue) 2379 { 2380 unsigned char *cmdBuffer; 2381 unsigned char *currCmd; 2382 unsigned long cmdLen = 0; 2383 int status; 2384 2385 dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __FUNCTION__, regValue); 2386 2387 // Alloc memory for the string of commands. 2388 cmdBuffer = kmalloc (0x10, GFP_ATOMIC); 2389 if (cmdBuffer == NULL ) { 2390 return -ENOMEM; 2391 } 2392 2393 currCmd = cmdBuffer; 2394 2395 // Build a cmd in the buffer to write the given register 2396 MAKE_CMD_WRITE_REG (&currCmd, &cmdLen, 2397 edge_port->port->number - edge_port->port->serial->minor, 2398 regNum, regValue); 2399 2400 status = write_cmd_usb(edge_port, cmdBuffer, cmdLen); 2401 if (status) { 2402 /* something bad happened, let's free up the memory */ 2403 kfree (cmdBuffer); 2404 } 2405 2406 return status; 2407 } 2408 2409 2410 /***************************************************************************** 2411 * change_port_settings 2412 * This routine is called to set the UART on the device to match the specified 2413 * new settings. 2414 *****************************************************************************/ 2415 #ifndef CMSPAR 2416 #define CMSPAR 0 2417 #endif 2418 static void change_port_settings (struct edgeport_port *edge_port, struct termios *old_termios) 2419 { 2420 struct tty_struct *tty; 2421 int baud; 2422 unsigned cflag; 2423 __u8 mask = 0xff; 2424 __u8 lData; 2425 __u8 lParity; 2426 __u8 lStop; 2427 __u8 rxFlow; 2428 __u8 txFlow; 2429 int status; 2430 2431 dbg("%s - port %d", __FUNCTION__, edge_port->port->number); 2432 2433 if ((!edge_port->open) && 2434 (!edge_port->openPending)) { 2435 dbg("%s - port not opened", __FUNCTION__); 2436 return; 2437 } 2438 2439 tty = edge_port->port->tty; 2440 if ((!tty) || 2441 (!tty->termios)) { 2442 dbg("%s - no tty structures", __FUNCTION__); 2443 return; 2444 } 2445 2446 cflag = tty->termios->c_cflag; 2447 2448 switch (cflag & CSIZE) { 2449 case CS5: lData = LCR_BITS_5; mask = 0x1f; dbg("%s - data bits = 5", __FUNCTION__); break; 2450 case CS6: lData = LCR_BITS_6; mask = 0x3f; dbg("%s - data bits = 6", __FUNCTION__); break; 2451 case CS7: lData = LCR_BITS_7; mask = 0x7f; dbg("%s - data bits = 7", __FUNCTION__); break; 2452 default: 2453 case CS8: lData = LCR_BITS_8; dbg("%s - data bits = 8", __FUNCTION__); break; 2454 } 2455 2456 lParity = LCR_PAR_NONE; 2457 if (cflag & PARENB) { 2458 if (cflag & CMSPAR) { 2459 if (cflag & PARODD) { 2460 lParity = LCR_PAR_MARK; 2461 dbg("%s - parity = mark", __FUNCTION__); 2462 } else { 2463 lParity = LCR_PAR_SPACE; 2464 dbg("%s - parity = space", __FUNCTION__); 2465 } 2466 } else if (cflag & PARODD) { 2467 lParity = LCR_PAR_ODD; 2468 dbg("%s - parity = odd", __FUNCTION__); 2469 } else { 2470 lParity = LCR_PAR_EVEN; 2471 dbg("%s - parity = even", __FUNCTION__); 2472 } 2473 } else { 2474 dbg("%s - parity = none", __FUNCTION__); 2475 } 2476 2477 if (cflag & CSTOPB) { 2478 lStop = LCR_STOP_2; 2479 dbg("%s - stop bits = 2", __FUNCTION__); 2480 } else { 2481 lStop = LCR_STOP_1; 2482 dbg("%s - stop bits = 1", __FUNCTION__); 2483 } 2484 2485 /* figure out the flow control settings */ 2486 rxFlow = txFlow = 0x00; 2487 if (cflag & CRTSCTS) { 2488 rxFlow |= IOSP_RX_FLOW_RTS; 2489 txFlow |= IOSP_TX_FLOW_CTS; 2490 dbg("%s - RTS/CTS is enabled", __FUNCTION__); 2491 } else { 2492 dbg("%s - RTS/CTS is disabled", __FUNCTION__); 2493 } 2494 2495 /* if we are implementing XON/XOFF, set the start and stop character in the device */ 2496 if (I_IXOFF(tty) || I_IXON(tty)) { 2497 unsigned char stop_char = STOP_CHAR(tty); 2498 unsigned char start_char = START_CHAR(tty); 2499 2500 send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_XON_CHAR, start_char); 2501 send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_XOFF_CHAR, stop_char); 2502 2503 /* if we are implementing INBOUND XON/XOFF */ 2504 if (I_IXOFF(tty)) { 2505 rxFlow |= IOSP_RX_FLOW_XON_XOFF; 2506 dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __FUNCTION__, start_char, stop_char); 2507 } else { 2508 dbg("%s - INBOUND XON/XOFF is disabled", __FUNCTION__); 2509 } 2510 2511 /* if we are implementing OUTBOUND XON/XOFF */ 2512 if (I_IXON(tty)) { 2513 txFlow |= IOSP_TX_FLOW_XON_XOFF; 2514 dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __FUNCTION__, start_char, stop_char); 2515 } else { 2516 dbg("%s - OUTBOUND XON/XOFF is disabled", __FUNCTION__); 2517 } 2518 } 2519 2520 /* Set flow control to the configured value */ 2521 send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow); 2522 send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_TX_FLOW, txFlow); 2523 2524 2525 edge_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); 2526 edge_port->shadowLCR |= (lData | lParity | lStop); 2527 2528 edge_port->validDataMask = mask; 2529 2530 /* Send the updated LCR value to the EdgePort */ 2531 status = send_cmd_write_uart_register(edge_port, LCR, edge_port->shadowLCR); 2532 if (status != 0) { 2533 return; 2534 } 2535 2536 /* set up the MCR register and send it to the EdgePort */ 2537 edge_port->shadowMCR = MCR_MASTER_IE; 2538 if (cflag & CBAUD) { 2539 edge_port->shadowMCR |= (MCR_DTR | MCR_RTS); 2540 } 2541 status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); 2542 if (status != 0) { 2543 return; 2544 } 2545 2546 /* Determine divisor based on baud rate */ 2547 baud = tty_get_baud_rate(tty); 2548 if (!baud) { 2549 /* pick a default, any default... */ 2550 baud = 9600; 2551 } 2552 2553 dbg("%s - baud rate = %d", __FUNCTION__, baud); 2554 status = send_cmd_write_baud_rate (edge_port, baud); 2555 2556 return; 2557 } 2558 2559 2560 /**************************************************************************** 2561 * unicode_to_ascii 2562 * Turns a string from Unicode into ASCII. 2563 * Doesn't do a good job with any characters that are outside the normal 2564 * ASCII range, but it's only for debugging... 2565 * NOTE: expects the unicode in LE format 2566 ****************************************************************************/ 2567 static void unicode_to_ascii (char *string, __le16 *unicode, int unicode_size) 2568 { 2569 int i; 2570 2571 if (unicode_size <= 0) 2572 return; 2573 2574 for (i = 0; i < unicode_size; ++i) 2575 string[i] = (char)(le16_to_cpu(unicode[i])); 2576 string[unicode_size] = 0x00; 2577 } 2578 2579 2580 /**************************************************************************** 2581 * get_manufacturing_desc 2582 * reads in the manufacturing descriptor and stores it into the serial 2583 * structure. 2584 ****************************************************************************/ 2585 static void get_manufacturing_desc (struct edgeport_serial *edge_serial) 2586 { 2587 int response; 2588 2589 dbg("getting manufacturer descriptor"); 2590 2591 response = rom_read (edge_serial->serial, (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16, 2592 (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff), EDGE_MANUF_DESC_LEN, 2593 (__u8 *)(&edge_serial->manuf_descriptor)); 2594 2595 if (response < 1) { 2596 dev_err(&edge_serial->serial->dev->dev, "error in getting manufacturer descriptor\n"); 2597 } else { 2598 char string[30]; 2599 dbg("**Manufacturer Descriptor"); 2600 dbg(" RomSize: %dK", edge_serial->manuf_descriptor.RomSize); 2601 dbg(" RamSize: %dK", edge_serial->manuf_descriptor.RamSize); 2602 dbg(" CpuRev: %d", edge_serial->manuf_descriptor.CpuRev); 2603 dbg(" BoardRev: %d", edge_serial->manuf_descriptor.BoardRev); 2604 dbg(" NumPorts: %d", edge_serial->manuf_descriptor.NumPorts); 2605 dbg(" DescDate: %d/%d/%d", edge_serial->manuf_descriptor.DescDate[0], edge_serial->manuf_descriptor.DescDate[1], edge_serial->manuf_descriptor.DescDate[2]+1900); 2606 unicode_to_ascii (string, edge_serial->manuf_descriptor.SerialNumber, edge_serial->manuf_descriptor.SerNumLength/2-1); 2607 dbg(" SerialNumber: %s", string); 2608 unicode_to_ascii (string, edge_serial->manuf_descriptor.AssemblyNumber, edge_serial->manuf_descriptor.AssemblyNumLength/2-1); 2609 dbg(" AssemblyNumber: %s", string); 2610 unicode_to_ascii (string, edge_serial->manuf_descriptor.OemAssyNumber, edge_serial->manuf_descriptor.OemAssyNumLength/2-1); 2611 dbg(" OemAssyNumber: %s", string); 2612 dbg(" UartType: %d", edge_serial->manuf_descriptor.UartType); 2613 dbg(" IonPid: %d", edge_serial->manuf_descriptor.IonPid); 2614 dbg(" IonConfig: %d", edge_serial->manuf_descriptor.IonConfig); 2615 } 2616 } 2617 2618 2619 /**************************************************************************** 2620 * get_boot_desc 2621 * reads in the bootloader descriptor and stores it into the serial 2622 * structure. 2623 ****************************************************************************/ 2624 static void get_boot_desc (struct edgeport_serial *edge_serial) 2625 { 2626 int response; 2627 2628 dbg("getting boot descriptor"); 2629 2630 response = rom_read (edge_serial->serial, (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16, 2631 (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff), EDGE_BOOT_DESC_LEN, 2632 (__u8 *)(&edge_serial->boot_descriptor)); 2633 2634 if (response < 1) { 2635 dev_err(&edge_serial->serial->dev->dev, "error in getting boot descriptor\n"); 2636 } else { 2637 dbg("**Boot Descriptor:"); 2638 dbg(" BootCodeLength: %d", le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength)); 2639 dbg(" MajorVersion: %d", edge_serial->boot_descriptor.MajorVersion); 2640 dbg(" MinorVersion: %d", edge_serial->boot_descriptor.MinorVersion); 2641 dbg(" BuildNumber: %d", le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); 2642 dbg(" Capabilities: 0x%x", le16_to_cpu(edge_serial->boot_descriptor.Capabilities)); 2643 dbg(" UConfig0: %d", edge_serial->boot_descriptor.UConfig0); 2644 dbg(" UConfig1: %d", edge_serial->boot_descriptor.UConfig1); 2645 } 2646 } 2647 2648 2649 /**************************************************************************** 2650 * load_application_firmware 2651 * This is called to load the application firmware to the device 2652 ****************************************************************************/ 2653 static void load_application_firmware (struct edgeport_serial *edge_serial) 2654 { 2655 struct edge_firmware_image_record *record; 2656 unsigned char *firmware; 2657 unsigned char *FirmwareImage; 2658 int ImageSize; 2659 int response; 2660 2661 2662 switch (edge_serial->product_info.iDownloadFile) { 2663 case EDGE_DOWNLOAD_FILE_I930: 2664 dbg("downloading firmware version (930) %d.%d.%d", 2665 OperationalCodeImageVersion_GEN1.MajorVersion, 2666 OperationalCodeImageVersion_GEN1.MinorVersion, 2667 OperationalCodeImageVersion_GEN1.BuildNumber); 2668 firmware = &OperationalCodeImage_GEN1[0]; 2669 FirmwareImage = &OperationalCodeImage_GEN1[0]; 2670 ImageSize = sizeof(OperationalCodeImage_GEN1); 2671 break; 2672 2673 case EDGE_DOWNLOAD_FILE_80251: 2674 dbg("downloading firmware version (80251) %d.%d.%d", 2675 OperationalCodeImageVersion_GEN2.MajorVersion, 2676 OperationalCodeImageVersion_GEN2.MinorVersion, 2677 OperationalCodeImageVersion_GEN2.BuildNumber); 2678 firmware = &OperationalCodeImage_GEN2[0]; 2679 FirmwareImage = &OperationalCodeImage_GEN2[0]; 2680 ImageSize = sizeof(OperationalCodeImage_GEN2); 2681 break; 2682 2683 case EDGE_DOWNLOAD_FILE_NONE: 2684 dbg ("No download file specified, skipping download\n"); 2685 return; 2686 2687 default: 2688 return; 2689 } 2690 2691 2692 for (;;) { 2693 record = (struct edge_firmware_image_record *)firmware; 2694 response = sram_write (edge_serial->serial, le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len), &record->Data[0]); 2695 if (response < 0) { 2696 dev_err(&edge_serial->serial->dev->dev, "sram_write failed (%x, %x, %d)\n", le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len)); 2697 break; 2698 } 2699 firmware += sizeof (struct edge_firmware_image_record) + le16_to_cpu(record->Len); 2700 if (firmware >= &FirmwareImage[ImageSize]) { 2701 break; 2702 } 2703 } 2704 2705 dbg("sending exec_dl_code"); 2706 response = usb_control_msg (edge_serial->serial->dev, 2707 usb_sndctrlpipe(edge_serial->serial->dev, 0), 2708 USB_REQUEST_ION_EXEC_DL_CODE, 2709 0x40, 0x4000, 0x0001, NULL, 0, 3000); 2710 2711 return; 2712 } 2713 2714 2715 /**************************************************************************** 2716 * edge_startup 2717 ****************************************************************************/ 2718 static int edge_startup (struct usb_serial *serial) 2719 { 2720 struct edgeport_serial *edge_serial; 2721 struct edgeport_port *edge_port; 2722 struct usb_device *dev; 2723 int i; 2724 2725 dev = serial->dev; 2726 2727 /* create our private serial structure */ 2728 edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); 2729 if (edge_serial == NULL) { 2730 dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__); 2731 return -ENOMEM; 2732 } 2733 spin_lock_init(&edge_serial->es_lock); 2734 edge_serial->serial = serial; 2735 usb_set_serial_data(serial, edge_serial); 2736 2737 /* get the name for the device from the device */ 2738 if ( (i = get_string(dev, dev->descriptor.iManufacturer, &edge_serial->name[0])) != 0) { 2739 edge_serial->name[i-1] = ' '; 2740 } 2741 2742 get_string(dev, dev->descriptor.iProduct, &edge_serial->name[i]); 2743 2744 dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name); 2745 2746 /* get the manufacturing descriptor for this device */ 2747 get_manufacturing_desc (edge_serial); 2748 2749 /* get the boot descriptor */ 2750 get_boot_desc (edge_serial); 2751 2752 get_product_info(edge_serial); 2753 2754 /* set the number of ports from the manufacturing description */ 2755 /* serial->num_ports = serial->product_info.NumPorts; */ 2756 if (edge_serial->product_info.NumPorts != serial->num_ports) { 2757 warn("%s - Device Reported %d serial ports vs core " 2758 "thinking we have %d ports, email greg@kroah.com this info.", 2759 __FUNCTION__, edge_serial->product_info.NumPorts, 2760 serial->num_ports); 2761 } 2762 2763 dbg("%s - time 1 %ld", __FUNCTION__, jiffies); 2764 2765 /* now load the application firmware into this device */ 2766 load_application_firmware (edge_serial); 2767 2768 dbg("%s - time 2 %ld", __FUNCTION__, jiffies); 2769 2770 /* Check current Edgeport EEPROM and update if necessary */ 2771 update_edgeport_E2PROM (edge_serial); 2772 2773 dbg("%s - time 3 %ld", __FUNCTION__, jiffies); 2774 2775 /* set the configuration to use #1 */ 2776 // dbg("set_configuration 1"); 2777 // usb_set_configuration (dev, 1); 2778 2779 /* we set up the pointers to the endpoints in the edge_open function, 2780 * as the structures aren't created yet. */ 2781 2782 /* set up our port private structures */ 2783 for (i = 0; i < serial->num_ports; ++i) { 2784 edge_port = kmalloc (sizeof(struct edgeport_port), GFP_KERNEL); 2785 if (edge_port == NULL) { 2786 dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__); 2787 usb_set_serial_data(serial, NULL); 2788 kfree(edge_serial); 2789 return -ENOMEM; 2790 } 2791 memset (edge_port, 0, sizeof(struct edgeport_port)); 2792 spin_lock_init(&edge_port->ep_lock); 2793 edge_port->port = serial->port[i]; 2794 usb_set_serial_port_data(serial->port[i], edge_port); 2795 } 2796 2797 return 0; 2798 } 2799 2800 2801 /**************************************************************************** 2802 * edge_shutdown 2803 * This function is called whenever the device is removed from the usb bus. 2804 ****************************************************************************/ 2805 static void edge_shutdown (struct usb_serial *serial) 2806 { 2807 int i; 2808 2809 dbg("%s", __FUNCTION__); 2810 2811 /* stop reads and writes on all ports */ 2812 for (i=0; i < serial->num_ports; ++i) { 2813 kfree (usb_get_serial_port_data(serial->port[i])); 2814 usb_set_serial_port_data(serial->port[i], NULL); 2815 } 2816 kfree (usb_get_serial_data(serial)); 2817 usb_set_serial_data(serial, NULL); 2818 } 2819 2820 2821 /**************************************************************************** 2822 * edgeport_init 2823 * This is called by the module subsystem, or on startup to initialize us 2824 ****************************************************************************/ 2825 static int __init edgeport_init(void) 2826 { 2827 int retval; 2828 2829 retval = usb_serial_register(&edgeport_2port_device); 2830 if (retval) 2831 goto failed_2port_device_register; 2832 retval = usb_serial_register(&edgeport_4port_device); 2833 if (retval) 2834 goto failed_4port_device_register; 2835 retval = usb_serial_register(&edgeport_8port_device); 2836 if (retval) 2837 goto failed_8port_device_register; 2838 retval = usb_register(&io_driver); 2839 if (retval) 2840 goto failed_usb_register; 2841 info(DRIVER_DESC " " DRIVER_VERSION); 2842 return 0; 2843 2844 failed_usb_register: 2845 usb_serial_deregister(&edgeport_8port_device); 2846 failed_8port_device_register: 2847 usb_serial_deregister(&edgeport_4port_device); 2848 failed_4port_device_register: 2849 usb_serial_deregister(&edgeport_2port_device); 2850 failed_2port_device_register: 2851 return retval; 2852 } 2853 2854 2855 /**************************************************************************** 2856 * edgeport_exit 2857 * Called when the driver is about to be unloaded. 2858 ****************************************************************************/ 2859 static void __exit edgeport_exit (void) 2860 { 2861 usb_deregister (&io_driver); 2862 usb_serial_deregister (&edgeport_2port_device); 2863 usb_serial_deregister (&edgeport_4port_device); 2864 usb_serial_deregister (&edgeport_8port_device); 2865 } 2866 2867 module_init(edgeport_init); 2868 module_exit(edgeport_exit); 2869 2870 /* Module information */ 2871 MODULE_AUTHOR( DRIVER_AUTHOR ); 2872 MODULE_DESCRIPTION( DRIVER_DESC ); 2873 MODULE_LICENSE("GPL"); 2874 2875 module_param(debug, bool, S_IRUGO | S_IWUSR); 2876 MODULE_PARM_DESC(debug, "Debug enabled or not"); 2877 2878 module_param(low_latency, bool, S_IRUGO | S_IWUSR); 2879 MODULE_PARM_DESC(low_latency, "Low latency enabled or not"); 2880