1 /* 2 * Definitions for the FTDI USB Single Port Serial Converter - 3 * known as FTDI_SIO (Serial Input/Output application of the chipset) 4 * 5 * The example I have is known as the USC-1000 which is available from 6 * http://www.dse.co.nz - cat no XH4214 It looks similar to this: 7 * http://www.dansdata.com/usbser.htm but I can't be sure There are other 8 * USC-1000s which don't look like my device though so beware! 9 * 10 * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, 11 * USB on the other. 12 * 13 * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details 14 * of the protocol required to talk to the device and ongoing assistence 15 * during development. 16 * 17 * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the 18 * FTDI_SIO implementation. 19 * 20 * Philipp G�hring - pg@futureware.at - added the Device ID of the USB relais 21 * from Rudolf Gugler 22 * 23 */ 24 25 #define FTDI_VID 0x0403 /* Vendor Id */ 26 #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ 27 #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ 28 #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ 29 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ 30 #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ 31 #define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ 32 #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ 33 #define FTDI_NF_RIC_PID 0x0001 /* Product Id */ 34 35 36 /* www.canusb.com Lawicel CANUSB device */ 37 #define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ 38 39 /* AlphaMicro Components AMC-232USB01 device */ 40 #define FTDI_AMC232_PID 0xFF00 /* Product Id */ 41 42 /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ 43 #define FTDI_ACTZWAVE_PID 0xF2D0 44 45 46 /* www.starting-point-systems.com �Chameleon device */ 47 #define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ 48 49 /* www.irtrans.de device */ 50 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ 51 52 53 /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ 54 #define FTDI_TTUSB_PID 0xFF20 /* Product Id */ 55 56 /* iPlus device */ 57 #define FTDI_IPLUS_PID 0xD070 /* Product Id */ 58 59 /* DMX4ALL DMX Interfaces */ 60 #define FTDI_DMX4ALL 0xC850 61 62 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ 63 /* they use the ftdi chipset for the USB interface and the vendor id is the same */ 64 #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ 65 #define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ 66 #define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ 67 #define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ 68 #define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ 69 #define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ 70 #define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ 71 #define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ 72 73 /* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ 74 /* broadband internet service. The following PID is exhibited by the usb device supplied */ 75 /* (the VID is the standard ftdi vid (FTDI_VID) */ 76 #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ 77 78 /* 79 * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device 80 * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) 81 * (the VID is the standard ftdi vid (FTDI_VID) */ 82 #define FTDI_PCDJ_DAC2_PID 0xFA88 83 84 /* 85 * The following are the values for the Matrix Orbital LCD displays, 86 * which are the FT232BM ( similar to the 8U232AM ) 87 */ 88 #define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ 89 #define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ 90 #define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ 91 #define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ 92 #define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ 93 #define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ 94 #define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ 95 96 /* Interbiometrics USB I/O Board */ 97 /* Developed for Interbiometrics by Rudolf Gugler */ 98 #define INTERBIOMETRICS_VID 0x1209 99 #define INTERBIOMETRICS_IOBOARD_PID 0x1002 100 #define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 101 102 /* 103 * The following are the values for the Perle Systems 104 * UltraPort USB serial converters 105 */ 106 #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ 107 108 /* 109 * The following are the values for the Sealevel SeaLINK+ adapters. 110 * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and 111 * removed some PIDs that don't seem to match any existing products.) 112 */ 113 #define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ 114 #define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ 115 #define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ 116 #define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ 117 #define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ 118 #define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ 119 #define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ 120 #define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ 121 #define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ 122 #define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ 123 #define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ 124 #define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ 125 #define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ 126 #define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ 127 #define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ 128 #define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ 129 #define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ 130 #define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ 131 #define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ 132 #define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ 133 #define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ 134 #define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ 135 #define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ 136 #define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ 137 #define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ 138 #define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ 139 #define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ 140 #define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ 141 #define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ 142 #define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ 143 #define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ 144 #define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ 145 #define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ 146 #define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ 147 #define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ 148 #define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ 149 #define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ 150 #define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ 151 #define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ 152 #define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ 153 #define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ 154 #define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ 155 #define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ 156 #define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ 157 #define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ 158 #define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ 159 #define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ 160 #define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ 161 162 /* 163 * The following are the values for two KOBIL chipcard terminals. 164 */ 165 #define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ 166 #define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ 167 #define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ 168 169 /* 170 * Icom ID-1 digital transceiver 171 */ 172 173 #define ICOM_ID1_VID 0x0C26 174 #define ICOM_ID1_PID 0x0004 175 176 /* 177 * ASK.fr devices 178 */ 179 #define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ 180 181 /* 182 * FTDI USB UART chips used in construction projects from the 183 * Elektor Electronics magazine (http://elektor-electronics.co.uk) 184 */ 185 #define ELEKTOR_VID 0x0C7D 186 #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ 187 188 /* 189 * DSS-20 Sync Station for Sony Ericsson P800 190 */ 191 #define FTDI_DSS20_PID 0xFC82 192 193 /* 194 * Home Electronics (www.home-electro.com) USB gadgets 195 */ 196 #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ 197 198 /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ 199 /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ 200 #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ 201 202 /* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ 203 204 #define FTDI_TNC_X_PID 0xEBE0 205 206 /* 207 * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). 208 * All of these devices use FTDI's vendor ID (0x0403). 209 * 210 * The previously included PID for the UO 100 module was incorrect. 211 * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). 212 * 213 * Armin Laeuger originally sent the PID for the UM 100 module. 214 */ 215 #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ 216 #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ 217 #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ 218 #define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ 219 /* Additional ELV PIDs that default to using the FTDI D2XX drivers on 220 * MS Windows, rather than the FTDI Virtual Com Port drivers. 221 * Maybe these will be easier to use with the libftdi/libusb user-space 222 * drivers, or possibly the Comedi drivers in some cases. */ 223 #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ 224 #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ 225 #define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ 226 #define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ 227 #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ 228 #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ 229 #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ 230 #define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ 231 #define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ 232 #define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ 233 #define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ 234 #define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ 235 #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ 236 #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ 237 #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ 238 #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ 239 #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ 240 #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ 241 #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ 242 #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ 243 244 /* 245 * Definitions for ID TECH (www.idt-net.com) devices 246 */ 247 #define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ 248 #define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ 249 250 /* 251 * Definitions for Omnidirectional Control Technology, Inc. devices 252 */ 253 #define OCT_VID 0x0B39 /* OCT vendor ID */ 254 /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ 255 /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ 256 /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ 257 #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ 258 259 /* an infrared receiver for user access control with IR tags */ 260 #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ 261 262 /* 263 * Definitions for Artemis astronomical USB based cameras 264 * Check it at http://www.artemisccd.co.uk/ 265 */ 266 #define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ 267 268 /* 269 * Definitions for ATIK Instruments astronomical USB based cameras 270 * Check it at http://www.atik-instruments.com/ 271 */ 272 #define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ 273 #define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ 274 #define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ 275 #define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ 276 277 /* 278 * Protego product ids 279 */ 280 #define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ 281 #define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ 282 #define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ 283 #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ 284 285 /* 286 * Gude Analog- und Digitalsysteme GmbH 287 */ 288 #define FTDI_GUDEADS_E808_PID 0xE808 289 #define FTDI_GUDEADS_E809_PID 0xE809 290 #define FTDI_GUDEADS_E80A_PID 0xE80A 291 #define FTDI_GUDEADS_E80B_PID 0xE80B 292 #define FTDI_GUDEADS_E80C_PID 0xE80C 293 #define FTDI_GUDEADS_E80D_PID 0xE80D 294 #define FTDI_GUDEADS_E80E_PID 0xE80E 295 #define FTDI_GUDEADS_E80F_PID 0xE80F 296 #define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ 297 #define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ 298 #define FTDI_GUDEADS_E88A_PID 0xE88A 299 #define FTDI_GUDEADS_E88B_PID 0xE88B 300 #define FTDI_GUDEADS_E88C_PID 0xE88C 301 #define FTDI_GUDEADS_E88D_PID 0xE88D 302 #define FTDI_GUDEADS_E88E_PID 0xE88E 303 #define FTDI_GUDEADS_E88F_PID 0xE88F 304 305 /* 306 * Linx Technologies product ids 307 */ 308 #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ 309 #define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ 310 #define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ 311 #define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ 312 #define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ 313 314 /* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ 315 /* unit for PIC16's/PIC18's */ 316 #define FTDI_CCSICDU20_0_PID 0xF9D0 317 #define FTDI_CCSICDU40_1_PID 0xF9D1 318 #define FTDI_CCSMACHX_2_PID 0xF9D2 319 320 /* Inside Accesso contactless reader (http://www.insidefr.com) */ 321 #define INSIDE_ACCESSO 0xFAD0 322 323 /* 324 * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI 325 */ 326 #define INTREPID_VID 0x093C 327 #define INTREPID_VALUECAN_PID 0x0601 328 #define INTREPID_NEOVI_PID 0x0701 329 330 /* 331 * Falcom Wireless Communications GmbH 332 */ 333 #define FALCOM_VID 0x0F94 /* Vendor Id */ 334 #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ 335 #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ 336 337 /* 338 * SUUNTO product ids 339 */ 340 #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ 341 342 /* 343 * TTi (Thurlby Thandar Instruments) 344 */ 345 #define TTI_VID 0x103E /* Vendor Id */ 346 #define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ 347 348 /* 349 * Definitions for B&B Electronics products. 350 */ 351 #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ 352 #define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ 353 #define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ 354 #define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ 355 356 /* 357 * RM Michaelides CANview USB (http://www.rmcan.com) 358 * CAN fieldbus interface adapter, added by port GmbH www.port.de) 359 * Ian Abbott changed the macro names for consistency. 360 */ 361 #define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ 362 363 /* 364 * EVER Eco Pro UPS (http://www.ever.com.pl/) 365 */ 366 367 #define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ 368 369 /* 370 * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, 371 * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices 372 * and I'm not entirely sure which are used by which. 373 */ 374 #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 375 #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 376 377 /* 378 * Mobility Electronics products. 379 */ 380 #define MOBILITY_VID 0x1342 381 #define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ 382 383 /* 384 * microHAM product IDs (http://www.microham.com). 385 * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> 386 * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. 387 * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. 388 */ 389 #define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ 390 #define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ 391 #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ 392 #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ 393 #define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ 394 #define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ 395 #define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ 396 #define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ 397 398 /* 399 * Active Robots product ids. 400 */ 401 #define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ 402 403 /* 404 * Xsens Technologies BV products (http://www.xsens.com). 405 */ 406 #define XSENS_CONVERTER_0_PID 0xD388 407 #define XSENS_CONVERTER_1_PID 0xD389 408 #define XSENS_CONVERTER_2_PID 0xD38A 409 #define XSENS_CONVERTER_3_PID 0xD38B 410 #define XSENS_CONVERTER_4_PID 0xD38C 411 #define XSENS_CONVERTER_5_PID 0xD38D 412 #define XSENS_CONVERTER_6_PID 0xD38E 413 #define XSENS_CONVERTER_7_PID 0xD38F 414 415 /* 416 * Teratronik product ids. 417 * Submitted by O. W�lfelschneider. 418 */ 419 #define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ 420 #define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ 421 422 /* 423 * Evolution Robotics products (http://www.evolution.com/). 424 * Submitted by Shawn M. Lavelle. 425 */ 426 #define EVOLUTION_VID 0xDEEE /* Vendor ID */ 427 #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ 428 429 /* Pyramid Computer GmbH */ 430 #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ 431 432 /* 433 * Posiflex inc retail equipment (http://www.posiflex.com.tw) 434 */ 435 #define POSIFLEX_VID 0x0d3a /* Vendor ID */ 436 #define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ 437 438 /* 439 * Westrex International devices submitted by Cory Lee 440 */ 441 #define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ 442 #define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ 443 444 /* 445 * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) 446 */ 447 #define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ 448 449 /* 450 * Eclo (http://www.eclo.pt/) product IDs. 451 * PID 0xEA90 submitted by Martin Grill. 452 */ 453 #define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ 454 455 /* 456 * Papouch products (http://www.papouch.com/) 457 * Submitted by Folkert van Heusden 458 */ 459 460 #define PAPOUCH_VID 0x5050 /* Vendor ID */ 461 #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ 462 463 /* 464 * ACG Identification Technologies GmbH products (http://www.acg.de/). 465 * Submitted by anton -at- goto10 -dot- org. 466 */ 467 #define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ 468 469 /* 470 * Yost Engineering, Inc. products (www.yostengineering.com). 471 * PID 0xE050 submitted by Aaron Prose. 472 */ 473 #define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ 474 475 /* 476 * ThorLabs USB motor drivers 477 */ 478 #define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ 479 480 /* 481 * Testo products (http://www.testo.com/) 482 * Submitted by Colin Leroy 483 */ 484 #define TESTO_VID 0x128D 485 #define TESTO_USB_INTERFACE_PID 0x0001 486 487 /* 488 * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. 489 */ 490 #define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ 491 492 /* 493 * Tactrix OpenPort (ECU) devices. 494 * OpenPort 1.3M submitted by Donour Sizemore. 495 * OpenPort 1.3S and 1.3U submitted by Ian Abbott. 496 */ 497 #define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ 498 #define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ 499 #define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ 500 501 /* 502 * Telldus Technologies 503 */ 504 #define TELLDUS_VID 0x1781 /* Vendor ID */ 505 #define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ 506 507 /* 508 * IBS elektronik product ids 509 * Submitted by Thomas Schleusener 510 */ 511 #define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ 512 #define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ 513 #define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ 514 #define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ 515 #define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ 516 #define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ 517 #define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ 518 #define FTDI_IBS_PROD_PID 0xff3f /* future device */ 519 520 /* Commands */ 521 #define FTDI_SIO_RESET 0 /* Reset the port */ 522 #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ 523 #define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ 524 #define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */ 525 #define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */ 526 #define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modern status register */ 527 #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ 528 #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ 529 #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ 530 #define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */ 531 532 533 /* 534 * BmRequestType: 1100 0000b 535 * bRequest: FTDI_E2_READ 536 * wValue: 0 537 * wIndex: Address of word to read 538 * wLength: 2 539 * Data: Will return a word of data from E2Address 540 * 541 */ 542 543 /* Port Identifier Table */ 544 #define PIT_DEFAULT 0 /* SIOA */ 545 #define PIT_SIOA 1 /* SIOA */ 546 /* The device this driver is tested with one has only one port */ 547 #define PIT_SIOB 2 /* SIOB */ 548 #define PIT_PARALLEL 3 /* Parallel */ 549 550 /* FTDI_SIO_RESET */ 551 #define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET 552 #define FTDI_SIO_RESET_REQUEST_TYPE 0x40 553 #define FTDI_SIO_RESET_SIO 0 554 #define FTDI_SIO_RESET_PURGE_RX 1 555 #define FTDI_SIO_RESET_PURGE_TX 2 556 557 /* 558 * BmRequestType: 0100 0000B 559 * bRequest: FTDI_SIO_RESET 560 * wValue: Control Value 561 * 0 = Reset SIO 562 * 1 = Purge RX buffer 563 * 2 = Purge TX buffer 564 * wIndex: Port 565 * wLength: 0 566 * Data: None 567 * 568 * The Reset SIO command has this effect: 569 * 570 * Sets flow control set to 'none' 571 * Event char = $0D 572 * Event trigger = disabled 573 * Purge RX buffer 574 * Purge TX buffer 575 * Clear DTR 576 * Clear RTS 577 * baud and data format not reset 578 * 579 * The Purge RX and TX buffer commands affect nothing except the buffers 580 * 581 */ 582 583 /* FTDI_SIO_SET_BAUDRATE */ 584 #define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40 585 #define FTDI_SIO_SET_BAUDRATE_REQUEST 3 586 587 /* 588 * BmRequestType: 0100 0000B 589 * bRequest: FTDI_SIO_SET_BAUDRATE 590 * wValue: BaudDivisor value - see below 591 * wIndex: Port 592 * wLength: 0 593 * Data: None 594 * The BaudDivisor values are calculated as follows: 595 * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish 596 * I knew how to detect old chips to select proper base clock! 597 * - BaudDivisor is a fixed point number encoded in a funny way. 598 * (--WRONG WAY OF THINKING--) 599 * BaudDivisor is a fixed point number encoded with following bit weighs: 600 * (-2)(-1)(13..0). It is a radical with a denominator of 4, so values 601 * end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...). 602 * (--THE REALITY--) 603 * The both-bits-set has quite different meaning from 0.75 - the chip designers 604 * have decided it to mean 0.125 instead of 0.75. 605 * This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates 606 * and Flow Control Consideration for USB to RS232". 607 * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should 608 * automagically re-encode the resulting value to take fractions into consideration. 609 * As all values are integers, some bit twiddling is in order: 610 * BaudDivisor = (BaseClock / 16 / BaudRate) | 611 * (((BaseClock / 2 / BaudRate) & 4) ? 0x4000 // 0.5 612 * : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000 // 0.25 613 * : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000 // 0.125 614 * : 0) 615 * 616 * For the FT232BM, a 17th divisor bit was introduced to encode the multiples 617 * of 0.125 missing from the FT8U232AM. Bits 16 to 14 are coded as follows 618 * (the first four codes are the same as for the FT8U232AM, where bit 16 is 619 * always 0): 620 * 000 - add .000 to divisor 621 * 001 - add .500 to divisor 622 * 010 - add .250 to divisor 623 * 011 - add .125 to divisor 624 * 100 - add .375 to divisor 625 * 101 - add .625 to divisor 626 * 110 - add .750 to divisor 627 * 111 - add .875 to divisor 628 * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is 629 * placed in bit 0 of the urb index. 630 * 631 * Note that there are a couple of special cases to support the highest baud 632 * rates. If the calculated divisor value is 1, this needs to be replaced with 633 * 0. Additionally for the FT232BM, if the calculated divisor value is 0x4001 634 * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is 635 * not supported by the FT8U232AM). 636 */ 637 638 typedef enum { 639 SIO = 1, 640 FT8U232AM = 2, 641 FT232BM = 3, 642 FT2232C = 4, 643 FT232RL = 5, 644 } ftdi_chip_type_t; 645 646 typedef enum { 647 ftdi_sio_b300 = 0, 648 ftdi_sio_b600 = 1, 649 ftdi_sio_b1200 = 2, 650 ftdi_sio_b2400 = 3, 651 ftdi_sio_b4800 = 4, 652 ftdi_sio_b9600 = 5, 653 ftdi_sio_b19200 = 6, 654 ftdi_sio_b38400 = 7, 655 ftdi_sio_b57600 = 8, 656 ftdi_sio_b115200 = 9 657 } FTDI_SIO_baudrate_t ; 658 659 /* 660 * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values 661 * are calculated internally. 662 */ 663 664 #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA 665 #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40 666 #define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 ) 667 #define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 ) 668 #define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 ) 669 #define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 ) 670 #define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 ) 671 #define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11 ) 672 #define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11 ) 673 #define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11 ) 674 #define FTDI_SIO_SET_BREAK (0x1 << 14) 675 /* FTDI_SIO_SET_DATA */ 676 677 /* 678 * BmRequestType: 0100 0000B 679 * bRequest: FTDI_SIO_SET_DATA 680 * wValue: Data characteristics (see below) 681 * wIndex: Port 682 * wLength: 0 683 * Data: No 684 * 685 * Data characteristics 686 * 687 * B0..7 Number of data bits 688 * B8..10 Parity 689 * 0 = None 690 * 1 = Odd 691 * 2 = Even 692 * 3 = Mark 693 * 4 = Space 694 * B11..13 Stop Bits 695 * 0 = 1 696 * 1 = 1.5 697 * 2 = 2 698 * B14 699 * 1 = TX ON (break) 700 * 0 = TX OFF (normal state) 701 * B15 Reserved 702 * 703 */ 704 705 706 707 /* FTDI_SIO_MODEM_CTRL */ 708 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40 709 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL 710 711 /* 712 * BmRequestType: 0100 0000B 713 * bRequest: FTDI_SIO_MODEM_CTRL 714 * wValue: ControlValue (see below) 715 * wIndex: Port 716 * wLength: 0 717 * Data: None 718 * 719 * NOTE: If the device is in RTS/CTS flow control, the RTS set by this 720 * command will be IGNORED without an error being returned 721 * Also - you can not set DTR and RTS with one control message 722 */ 723 724 #define FTDI_SIO_SET_DTR_MASK 0x1 725 #define FTDI_SIO_SET_DTR_HIGH ( 1 | ( FTDI_SIO_SET_DTR_MASK << 8)) 726 #define FTDI_SIO_SET_DTR_LOW ( 0 | ( FTDI_SIO_SET_DTR_MASK << 8)) 727 #define FTDI_SIO_SET_RTS_MASK 0x2 728 #define FTDI_SIO_SET_RTS_HIGH ( 2 | ( FTDI_SIO_SET_RTS_MASK << 8 )) 729 #define FTDI_SIO_SET_RTS_LOW ( 0 | ( FTDI_SIO_SET_RTS_MASK << 8 )) 730 731 /* 732 * ControlValue 733 * B0 DTR state 734 * 0 = reset 735 * 1 = set 736 * B1 RTS state 737 * 0 = reset 738 * 1 = set 739 * B2..7 Reserved 740 * B8 DTR state enable 741 * 0 = ignore 742 * 1 = use DTR state 743 * B9 RTS state enable 744 * 0 = ignore 745 * 1 = use RTS state 746 * B10..15 Reserved 747 */ 748 749 /* FTDI_SIO_SET_FLOW_CTRL */ 750 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40 751 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL 752 #define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 753 #define FTDI_SIO_RTS_CTS_HS (0x1 << 8) 754 #define FTDI_SIO_DTR_DSR_HS (0x2 << 8) 755 #define FTDI_SIO_XON_XOFF_HS (0x4 << 8) 756 /* 757 * BmRequestType: 0100 0000b 758 * bRequest: FTDI_SIO_SET_FLOW_CTRL 759 * wValue: Xoff/Xon 760 * wIndex: Protocol/Port - hIndex is protocl / lIndex is port 761 * wLength: 0 762 * Data: None 763 * 764 * hIndex protocol is: 765 * B0 Output handshaking using RTS/CTS 766 * 0 = disabled 767 * 1 = enabled 768 * B1 Output handshaking using DTR/DSR 769 * 0 = disabled 770 * 1 = enabled 771 * B2 Xon/Xoff handshaking 772 * 0 = disabled 773 * 1 = enabled 774 * 775 * A value of zero in the hIndex field disables handshaking 776 * 777 * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character 778 * and the lValue field contains the XON character. 779 */ 780 781 /* 782 * FTDI_SIO_GET_LATENCY_TIMER 783 * 784 * Set the timeout interval. The FTDI collects data from the slave 785 * device, transmitting it to the host when either A) 62 bytes are 786 * received, or B) the timeout interval has elapsed and the buffer 787 * contains at least 1 byte. Setting this value to a small number 788 * can dramatically improve performance for applications which send 789 * small packets, since the default value is 16ms. 790 */ 791 #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER 792 #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0 793 794 /* 795 * BmRequestType: 1100 0000b 796 * bRequest: FTDI_SIO_GET_LATENCY_TIMER 797 * wValue: 0 798 * wIndex: Port 799 * wLength: 0 800 * Data: latency (on return) 801 */ 802 803 /* 804 * FTDI_SIO_SET_LATENCY_TIMER 805 * 806 * Set the timeout interval. The FTDI collects data from the slave 807 * device, transmitting it to the host when either A) 62 bytes are 808 * received, or B) the timeout interval has elapsed and the buffer 809 * contains at least 1 byte. Setting this value to a small number 810 * can dramatically improve performance for applications which send 811 * small packets, since the default value is 16ms. 812 */ 813 #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER 814 #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40 815 816 /* 817 * BmRequestType: 0100 0000b 818 * bRequest: FTDI_SIO_SET_LATENCY_TIMER 819 * wValue: Latency (milliseconds) 820 * wIndex: Port 821 * wLength: 0 822 * Data: None 823 * 824 * wValue: 825 * B0..7 Latency timer 826 * B8..15 0 827 * 828 */ 829 830 /* 831 * FTDI_SIO_SET_EVENT_CHAR 832 * 833 * Set the special event character for the specified communications port. 834 * If the device sees this character it will immediately return the 835 * data read so far - rather than wait 40ms or until 62 bytes are read 836 * which is what normally happens. 837 */ 838 839 840 #define FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR 841 #define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40 842 843 844 /* 845 * BmRequestType: 0100 0000b 846 * bRequest: FTDI_SIO_SET_EVENT_CHAR 847 * wValue: EventChar 848 * wIndex: Port 849 * wLength: 0 850 * Data: None 851 * 852 * wValue: 853 * B0..7 Event Character 854 * B8 Event Character Processing 855 * 0 = disabled 856 * 1 = enabled 857 * B9..15 Reserved 858 * 859 */ 860 861 /* FTDI_SIO_SET_ERROR_CHAR */ 862 863 /* Set the parity error replacement character for the specified communications port */ 864 865 /* 866 * BmRequestType: 0100 0000b 867 * bRequest: FTDI_SIO_SET_EVENT_CHAR 868 * wValue: Error Char 869 * wIndex: Port 870 * wLength: 0 871 * Data: None 872 * 873 *Error Char 874 * B0..7 Error Character 875 * B8 Error Character Processing 876 * 0 = disabled 877 * 1 = enabled 878 * B9..15 Reserved 879 * 880 */ 881 882 /* FTDI_SIO_GET_MODEM_STATUS */ 883 /* Retrieve the current value of the modem status register */ 884 885 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0 886 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS 887 #define FTDI_SIO_CTS_MASK 0x10 888 #define FTDI_SIO_DSR_MASK 0x20 889 #define FTDI_SIO_RI_MASK 0x40 890 #define FTDI_SIO_RLSD_MASK 0x80 891 /* 892 * BmRequestType: 1100 0000b 893 * bRequest: FTDI_SIO_GET_MODEM_STATUS 894 * wValue: zero 895 * wIndex: Port 896 * wLength: 1 897 * Data: Status 898 * 899 * One byte of data is returned 900 * B0..3 0 901 * B4 CTS 902 * 0 = inactive 903 * 1 = active 904 * B5 DSR 905 * 0 = inactive 906 * 1 = active 907 * B6 Ring Indicator (RI) 908 * 0 = inactive 909 * 1 = active 910 * B7 Receive Line Signal Detect (RLSD) 911 * 0 = inactive 912 * 1 = active 913 */ 914 915 916 917 /* Descriptors returned by the device 918 * 919 * Device Descriptor 920 * 921 * Offset Field Size Value Description 922 * 0 bLength 1 0x12 Size of descriptor in bytes 923 * 1 bDescriptorType 1 0x01 DEVICE Descriptor Type 924 * 2 bcdUSB 2 0x0110 USB Spec Release Number 925 * 4 bDeviceClass 1 0x00 Class Code 926 * 5 bDeviceSubClass 1 0x00 SubClass Code 927 * 6 bDeviceProtocol 1 0x00 Protocol Code 928 * 7 bMaxPacketSize0 1 0x08 Maximum packet size for endpoint 0 929 * 8 idVendor 2 0x0403 Vendor ID 930 * 10 idProduct 2 0x8372 Product ID (FTDI_SIO_PID) 931 * 12 bcdDevice 2 0x0001 Device release number 932 * 14 iManufacturer 1 0x01 Index of man. string desc 933 * 15 iProduct 1 0x02 Index of prod string desc 934 * 16 iSerialNumber 1 0x02 Index of serial nmr string desc 935 * 17 bNumConfigurations 1 0x01 Number of possible configurations 936 * 937 * Configuration Descriptor 938 * 939 * Offset Field Size Value 940 * 0 bLength 1 0x09 Size of descriptor in bytes 941 * 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type 942 * 2 wTotalLength 2 0x0020 Total length of data 943 * 4 bNumInterfaces 1 0x01 Number of interfaces supported 944 * 5 bConfigurationValue 1 0x01 Argument for SetCOnfiguration() req 945 * 6 iConfiguration 1 0x02 Index of config string descriptor 946 * 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup 947 * 8 MaxPower 1 0x1E Max power consumption 948 * 949 * Interface Descriptor 950 * 951 * Offset Field Size Value 952 * 0 bLength 1 0x09 Size of descriptor in bytes 953 * 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type 954 * 2 bInterfaceNumber 1 0x00 Number of interface 955 * 3 bAlternateSetting 1 0x00 Value used to select alternate 956 * 4 bNumEndpoints 1 0x02 Number of endpoints 957 * 5 bInterfaceClass 1 0xFF Class Code 958 * 6 bInterfaceSubClass 1 0xFF Subclass Code 959 * 7 bInterfaceProtocol 1 0xFF Protocol Code 960 * 8 iInterface 1 0x02 Index of interface string description 961 * 962 * IN Endpoint Descriptor 963 * 964 * Offset Field Size Value 965 * 0 bLength 1 0x07 Size of descriptor in bytes 966 * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type 967 * 2 bEndpointAddress 1 0x82 Address of endpoint 968 * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk 969 * 4 bNumEndpoints 2 0x0040 maximum packet size 970 * 5 bInterval 1 0x00 Interval for polling endpoint 971 * 972 * OUT Endpoint Descriptor 973 * 974 * Offset Field Size Value 975 * 0 bLength 1 0x07 Size of descriptor in bytes 976 * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type 977 * 2 bEndpointAddress 1 0x02 Address of endpoint 978 * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk 979 * 4 bNumEndpoints 2 0x0040 maximum packet size 980 * 5 bInterval 1 0x00 Interval for polling endpoint 981 * 982 * DATA FORMAT 983 * 984 * IN Endpoint 985 * 986 * The device reserves the first two bytes of data on this endpoint to contain the current 987 * values of the modem and line status registers. In the absence of data, the device 988 * generates a message consisting of these two status bytes every 40 ms 989 * 990 * Byte 0: Modem Status 991 * 992 * Offset Description 993 * B0 Reserved - must be 1 994 * B1 Reserved - must be 0 995 * B2 Reserved - must be 0 996 * B3 Reserved - must be 0 997 * B4 Clear to Send (CTS) 998 * B5 Data Set Ready (DSR) 999 * B6 Ring Indicator (RI) 1000 * B7 Receive Line Signal Detect (RLSD) 1001 * 1002 * Byte 1: Line Status 1003 * 1004 * Offset Description 1005 * B0 Data Ready (DR) 1006 * B1 Overrun Error (OE) 1007 * B2 Parity Error (PE) 1008 * B3 Framing Error (FE) 1009 * B4 Break Interrupt (BI) 1010 * B5 Transmitter Holding Register (THRE) 1011 * B6 Transmitter Empty (TEMT) 1012 * B7 Error in RCVR FIFO 1013 * 1014 */ 1015 #define FTDI_RS0_CTS (1 << 4) 1016 #define FTDI_RS0_DSR (1 << 5) 1017 #define FTDI_RS0_RI (1 << 6) 1018 #define FTDI_RS0_RLSD (1 << 7) 1019 1020 #define FTDI_RS_DR 1 1021 #define FTDI_RS_OE (1<<1) 1022 #define FTDI_RS_PE (1<<2) 1023 #define FTDI_RS_FE (1<<3) 1024 #define FTDI_RS_BI (1<<4) 1025 #define FTDI_RS_THRE (1<<5) 1026 #define FTDI_RS_TEMT (1<<6) 1027 #define FTDI_RS_FIFO (1<<7) 1028 1029 /* 1030 * OUT Endpoint 1031 * 1032 * This device reserves the first bytes of data on this endpoint contain the length 1033 * and port identifier of the message. For the FTDI USB Serial converter the port 1034 * identifier is always 1. 1035 * 1036 * Byte 0: Line Status 1037 * 1038 * Offset Description 1039 * B0 Reserved - must be 1 1040 * B1 Reserved - must be 0 1041 * B2..7 Length of message - (not including Byte 0) 1042 * 1043 */ 1044 1045