1 /* 2 * Definitions for the FTDI USB Single Port Serial Converter - 3 * known as FTDI_SIO (Serial Input/Output application of the chipset) 4 * 5 * The example I have is known as the USC-1000 which is available from 6 * http://www.dse.co.nz - cat no XH4214 It looks similar to this: 7 * http://www.dansdata.com/usbser.htm but I can't be sure There are other 8 * USC-1000s which don't look like my device though so beware! 9 * 10 * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, 11 * USB on the other. 12 * 13 * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details 14 * of the protocol required to talk to the device and ongoing assistence 15 * during development. 16 * 17 * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the 18 * FTDI_SIO implementation. 19 * 20 * Philipp G�hring - pg@futureware.at - added the Device ID of the USB relais 21 * from Rudolf Gugler 22 * 23 */ 24 25 #define FTDI_VID 0x0403 /* Vendor Id */ 26 #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ 27 #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ 28 #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ 29 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ 30 #define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ 31 #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ 32 #define FTDI_NF_RIC_PID 0x0001 /* Product Id */ 33 34 35 /* www.irtrans.de device */ 36 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ 37 38 39 /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ 40 #define FTDI_TTUSB_PID 0xFF20 /* Product Id */ 41 42 /* iPlus device */ 43 #define FTDI_IPLUS_PID 0xD070 /* Product Id */ 44 45 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ 46 /* they use the ftdi chipset for the USB interface and the vendor id is the same */ 47 #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ 48 #define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ 49 #define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ 50 #define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ 51 #define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ 52 #define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ 53 #define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ 54 #define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ 55 56 /* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ 57 /* broadband internet service. The following PID is exhibited by the usb device supplied */ 58 /* (the VID is the standard ftdi vid (FTDI_VID) */ 59 #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ 60 61 /* 62 * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device 63 * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) 64 * (the VID is the standard ftdi vid (FTDI_VID) */ 65 #define FTDI_PCDJ_DAC2_PID 0xFA88 66 67 /* 68 * The following are the values for the Matrix Orbital LCD displays, 69 * which are the FT232BM ( similar to the 8U232AM ) 70 */ 71 #define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ 72 #define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ 73 #define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ 74 #define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ 75 #define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ 76 #define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ 77 #define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ 78 79 /* Interbiometrics USB I/O Board */ 80 /* Developed for Interbiometrics by Rudolf Gugler */ 81 #define INTERBIOMETRICS_VID 0x1209 82 #define INTERBIOMETRICS_IOBOARD_PID 0x1002 83 #define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 84 85 /* 86 * The following are the values for the Perle Systems 87 * UltraPort USB serial converters 88 */ 89 #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ 90 91 /* 92 * The following are the values for the Sealevel SeaLINK+ adapters. 93 * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and 94 * removed some PIDs that don't seem to match any existing products.) 95 */ 96 #define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ 97 #define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ 98 #define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ 99 #define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ 100 #define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ 101 #define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ 102 #define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ 103 #define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ 104 #define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ 105 #define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ 106 #define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ 107 #define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ 108 #define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ 109 #define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ 110 #define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ 111 #define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ 112 #define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ 113 #define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ 114 #define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ 115 #define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ 116 #define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ 117 #define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ 118 #define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ 119 #define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ 120 #define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ 121 #define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ 122 #define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ 123 #define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ 124 #define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ 125 #define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ 126 #define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ 127 #define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ 128 #define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ 129 #define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ 130 #define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ 131 #define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ 132 #define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ 133 #define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ 134 #define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ 135 #define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ 136 #define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ 137 #define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ 138 #define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ 139 #define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ 140 #define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ 141 #define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ 142 #define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ 143 144 /* 145 * The following are the values for two KOBIL chipcard terminals. 146 */ 147 #define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ 148 #define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ 149 #define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ 150 151 /* 152 * Icom ID-1 digital transceiver 153 */ 154 155 #define ICOM_ID1_VID 0x0C26 156 #define ICOM_ID1_PID 0x0004 157 158 /* 159 * ASK.fr devices 160 */ 161 #define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ 162 163 /* 164 * DSS-20 Sync Station for Sony Ericsson P800 165 */ 166 167 #define FTDI_DSS20_PID 0xFC82 168 169 /* 170 * Home Electronics (www.home-electro.com) USB gadgets 171 */ 172 #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ 173 174 /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ 175 /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ 176 #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ 177 178 /* 179 * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). 180 * All of these devices use FTDI's vendor ID (0x0403). 181 * 182 * The previously included PID for the UO 100 module was incorrect. 183 * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). 184 * 185 * Armin Laeuger originally sent the PID for the UM 100 module. 186 */ 187 #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ 188 #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ 189 #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ 190 #define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ 191 /* Additional ELV PIDs that default to using the FTDI D2XX drivers on 192 * MS Windows, rather than the FTDI Virtual Com Port drivers. 193 * Maybe these will be easier to use with the libftdi/libusb user-space 194 * drivers, or possibly the Comedi drivers in some cases. */ 195 #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ 196 #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ 197 #define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ 198 #define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ 199 #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ 200 #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ 201 #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ 202 #define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ 203 #define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ 204 #define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ 205 #define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ 206 #define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ 207 #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ 208 #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ 209 #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ 210 #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ 211 #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ 212 #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ 213 #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ 214 #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ 215 216 /* 217 * Definitions for ID TECH (www.idt-net.com) devices 218 */ 219 #define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ 220 #define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ 221 222 /* 223 * Definitions for Omnidirectional Control Technology, Inc. devices 224 */ 225 #define OCT_VID 0x0B39 /* OCT vendor ID */ 226 /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ 227 /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ 228 /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ 229 #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ 230 231 /* an infrared receiver for user access control with IR tags */ 232 #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ 233 234 /* 235 * Definitions for Artemis astronomical USB based cameras 236 * Check it at http://www.artemisccd.co.uk/ 237 */ 238 #define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ 239 240 /* 241 * Definitions for ATIK Instruments astronomical USB based cameras 242 * Check it at http://www.atik-instruments.com/ 243 */ 244 #define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ 245 #define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ 246 #define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ 247 #define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ 248 249 /* 250 * Protego product ids 251 */ 252 #define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ 253 #define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ 254 #define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ 255 #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ 256 257 /* 258 * Gude Analog- und Digitalsysteme GmbH 259 */ 260 #define FTDI_GUDEADS_E808_PID 0xE808 261 #define FTDI_GUDEADS_E809_PID 0xE809 262 #define FTDI_GUDEADS_E80A_PID 0xE80A 263 #define FTDI_GUDEADS_E80B_PID 0xE80B 264 #define FTDI_GUDEADS_E80C_PID 0xE80C 265 #define FTDI_GUDEADS_E80D_PID 0xE80D 266 #define FTDI_GUDEADS_E80E_PID 0xE80E 267 #define FTDI_GUDEADS_E80F_PID 0xE80F 268 #define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ 269 #define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ 270 #define FTDI_GUDEADS_E88A_PID 0xE88A 271 #define FTDI_GUDEADS_E88B_PID 0xE88B 272 #define FTDI_GUDEADS_E88C_PID 0xE88C 273 #define FTDI_GUDEADS_E88D_PID 0xE88D 274 #define FTDI_GUDEADS_E88E_PID 0xE88E 275 #define FTDI_GUDEADS_E88F_PID 0xE88F 276 277 /* 278 * Linx Technologies product ids 279 */ 280 #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ 281 #define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ 282 #define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ 283 #define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ 284 #define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ 285 286 /* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ 287 /* unit for PIC16's/PIC18's */ 288 #define FTDI_CCSICDU20_0_PID 0xF9D0 289 #define FTDI_CCSICDU40_1_PID 0xF9D1 290 291 /* Inside Accesso contactless reader (http://www.insidefr.com) */ 292 #define INSIDE_ACCESSO 0xFAD0 293 294 /* 295 * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI 296 */ 297 #define INTREPID_VID 0x093C 298 #define INTREPID_VALUECAN_PID 0x0601 299 #define INTREPID_NEOVI_PID 0x0701 300 301 /* 302 * Falcom Wireless Communications GmbH 303 */ 304 #define FALCOM_VID 0x0F94 /* Vendor Id */ 305 #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ 306 #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ 307 308 /* 309 * SUUNTO product ids 310 */ 311 #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ 312 313 /* 314 * Definitions for B&B Electronics products. 315 */ 316 #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ 317 #define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ 318 #define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ 319 #define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ 320 321 /* 322 * RM Michaelides CANview USB (http://www.rmcan.com) 323 * CAN fieldbus interface adapter, added by port GmbH www.port.de) 324 * Ian Abbott changed the macro names for consistency. 325 */ 326 #define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ 327 328 /* 329 * EVER Eco Pro UPS (http://www.ever.com.pl/) 330 */ 331 332 #define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ 333 334 /* 335 * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, 336 * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices 337 * and I'm not entirely sure which are used by which. 338 */ 339 #define FTDI_4N_GALAXY_DE_0_PID 0x8372 340 #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 341 #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 342 343 /* 344 * Mobility Electronics products. 345 */ 346 #define MOBILITY_VID 0x1342 347 #define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ 348 349 /* 350 * microHAM product IDs (http://www.microham.com). 351 * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> 352 * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. 353 * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. 354 */ 355 #define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ 356 #define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ 357 #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ 358 #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ 359 #define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ 360 #define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ 361 #define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ 362 #define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ 363 364 /* 365 * Active Robots product ids. 366 */ 367 #define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ 368 369 /* 370 * Xsens Technologies BV products (http://www.xsens.com). 371 */ 372 #define XSENS_CONVERTER_0_PID 0xD388 373 #define XSENS_CONVERTER_1_PID 0xD389 374 #define XSENS_CONVERTER_2_PID 0xD38A 375 #define XSENS_CONVERTER_3_PID 0xD38B 376 #define XSENS_CONVERTER_4_PID 0xD38C 377 #define XSENS_CONVERTER_5_PID 0xD38D 378 #define XSENS_CONVERTER_6_PID 0xD38E 379 #define XSENS_CONVERTER_7_PID 0xD38F 380 381 /* 382 * Teratronik product ids. 383 * Submitted by O. W�lfelschneider. 384 */ 385 #define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ 386 #define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ 387 388 /* 389 * Evolution Robotics products (http://www.evolution.com/). 390 * Submitted by Shawn M. Lavelle. 391 */ 392 #define EVOLUTION_VID 0xDEEE /* Vendor ID */ 393 #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ 394 395 /* Pyramid Computer GmbH */ 396 #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ 397 398 /* 399 * Posiflex inc retail equipment (http://www.posiflex.com.tw) 400 */ 401 #define POSIFLEX_VID 0x0d3a /* Vendor ID */ 402 #define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ 403 404 /* 405 * Westrex International devices submitted by Cory Lee 406 */ 407 #define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ 408 #define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ 409 410 /* 411 * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) 412 */ 413 #define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ 414 415 /* 416 * Eclo (http://www.eclo.pt/) product IDs. 417 * PID 0xEA90 submitted by Martin Grill. 418 */ 419 #define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ 420 421 /* 422 * Papouch products (http://www.papouch.com/) 423 * Submitted by Folkert van Heusden 424 */ 425 426 #define PAPOUCH_VID 0x5050 /* Vendor ID */ 427 #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ 428 429 430 /* Commands */ 431 #define FTDI_SIO_RESET 0 /* Reset the port */ 432 #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ 433 #define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ 434 #define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */ 435 #define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */ 436 #define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modern status register */ 437 #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ 438 #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ 439 #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ 440 #define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */ 441 442 443 /* 444 * BmRequestType: 1100 0000b 445 * bRequest: FTDI_E2_READ 446 * wValue: 0 447 * wIndex: Address of word to read 448 * wLength: 2 449 * Data: Will return a word of data from E2Address 450 * 451 */ 452 453 /* Port Identifier Table */ 454 #define PIT_DEFAULT 0 /* SIOA */ 455 #define PIT_SIOA 1 /* SIOA */ 456 /* The device this driver is tested with one has only one port */ 457 #define PIT_SIOB 2 /* SIOB */ 458 #define PIT_PARALLEL 3 /* Parallel */ 459 460 /* FTDI_SIO_RESET */ 461 #define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET 462 #define FTDI_SIO_RESET_REQUEST_TYPE 0x40 463 #define FTDI_SIO_RESET_SIO 0 464 #define FTDI_SIO_RESET_PURGE_RX 1 465 #define FTDI_SIO_RESET_PURGE_TX 2 466 467 /* 468 * BmRequestType: 0100 0000B 469 * bRequest: FTDI_SIO_RESET 470 * wValue: Control Value 471 * 0 = Reset SIO 472 * 1 = Purge RX buffer 473 * 2 = Purge TX buffer 474 * wIndex: Port 475 * wLength: 0 476 * Data: None 477 * 478 * The Reset SIO command has this effect: 479 * 480 * Sets flow control set to 'none' 481 * Event char = $0D 482 * Event trigger = disabled 483 * Purge RX buffer 484 * Purge TX buffer 485 * Clear DTR 486 * Clear RTS 487 * baud and data format not reset 488 * 489 * The Purge RX and TX buffer commands affect nothing except the buffers 490 * 491 */ 492 493 /* FTDI_SIO_SET_BAUDRATE */ 494 #define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40 495 #define FTDI_SIO_SET_BAUDRATE_REQUEST 3 496 497 /* 498 * BmRequestType: 0100 0000B 499 * bRequest: FTDI_SIO_SET_BAUDRATE 500 * wValue: BaudDivisor value - see below 501 * wIndex: Port 502 * wLength: 0 503 * Data: None 504 * The BaudDivisor values are calculated as follows: 505 * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish 506 * I knew how to detect old chips to select proper base clock! 507 * - BaudDivisor is a fixed point number encoded in a funny way. 508 * (--WRONG WAY OF THINKING--) 509 * BaudDivisor is a fixed point number encoded with following bit weighs: 510 * (-2)(-1)(13..0). It is a radical with a denominator of 4, so values 511 * end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...). 512 * (--THE REALITY--) 513 * The both-bits-set has quite different meaning from 0.75 - the chip designers 514 * have decided it to mean 0.125 instead of 0.75. 515 * This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates 516 * and Flow Control Consideration for USB to RS232". 517 * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should 518 * automagically re-encode the resulting value to take fractions into consideration. 519 * As all values are integers, some bit twiddling is in order: 520 * BaudDivisor = (BaseClock / 16 / BaudRate) | 521 * (((BaseClock / 2 / BaudRate) & 4) ? 0x4000 // 0.5 522 * : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000 // 0.25 523 * : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000 // 0.125 524 * : 0) 525 * 526 * For the FT232BM, a 17th divisor bit was introduced to encode the multiples 527 * of 0.125 missing from the FT8U232AM. Bits 16 to 14 are coded as follows 528 * (the first four codes are the same as for the FT8U232AM, where bit 16 is 529 * always 0): 530 * 000 - add .000 to divisor 531 * 001 - add .500 to divisor 532 * 010 - add .250 to divisor 533 * 011 - add .125 to divisor 534 * 100 - add .375 to divisor 535 * 101 - add .625 to divisor 536 * 110 - add .750 to divisor 537 * 111 - add .875 to divisor 538 * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is 539 * placed in bit 0 of the urb index. 540 * 541 * Note that there are a couple of special cases to support the highest baud 542 * rates. If the calculated divisor value is 1, this needs to be replaced with 543 * 0. Additionally for the FT232BM, if the calculated divisor value is 0x4001 544 * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is 545 * not supported by the FT8U232AM). 546 */ 547 548 typedef enum { 549 SIO = 1, 550 FT8U232AM = 2, 551 FT232BM = 3, 552 FT2232C = 4, 553 } ftdi_chip_type_t; 554 555 typedef enum { 556 ftdi_sio_b300 = 0, 557 ftdi_sio_b600 = 1, 558 ftdi_sio_b1200 = 2, 559 ftdi_sio_b2400 = 3, 560 ftdi_sio_b4800 = 4, 561 ftdi_sio_b9600 = 5, 562 ftdi_sio_b19200 = 6, 563 ftdi_sio_b38400 = 7, 564 ftdi_sio_b57600 = 8, 565 ftdi_sio_b115200 = 9 566 } FTDI_SIO_baudrate_t ; 567 568 /* 569 * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values 570 * are calculated internally. 571 */ 572 573 #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA 574 #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40 575 #define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 ) 576 #define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 ) 577 #define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 ) 578 #define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 ) 579 #define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 ) 580 #define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11 ) 581 #define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11 ) 582 #define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11 ) 583 #define FTDI_SIO_SET_BREAK (0x1 << 14) 584 /* FTDI_SIO_SET_DATA */ 585 586 /* 587 * BmRequestType: 0100 0000B 588 * bRequest: FTDI_SIO_SET_DATA 589 * wValue: Data characteristics (see below) 590 * wIndex: Port 591 * wLength: 0 592 * Data: No 593 * 594 * Data characteristics 595 * 596 * B0..7 Number of data bits 597 * B8..10 Parity 598 * 0 = None 599 * 1 = Odd 600 * 2 = Even 601 * 3 = Mark 602 * 4 = Space 603 * B11..13 Stop Bits 604 * 0 = 1 605 * 1 = 1.5 606 * 2 = 2 607 * B14 608 * 1 = TX ON (break) 609 * 0 = TX OFF (normal state) 610 * B15 Reserved 611 * 612 */ 613 614 615 616 /* FTDI_SIO_MODEM_CTRL */ 617 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40 618 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL 619 620 /* 621 * BmRequestType: 0100 0000B 622 * bRequest: FTDI_SIO_MODEM_CTRL 623 * wValue: ControlValue (see below) 624 * wIndex: Port 625 * wLength: 0 626 * Data: None 627 * 628 * NOTE: If the device is in RTS/CTS flow control, the RTS set by this 629 * command will be IGNORED without an error being returned 630 * Also - you can not set DTR and RTS with one control message 631 */ 632 633 #define FTDI_SIO_SET_DTR_MASK 0x1 634 #define FTDI_SIO_SET_DTR_HIGH ( 1 | ( FTDI_SIO_SET_DTR_MASK << 8)) 635 #define FTDI_SIO_SET_DTR_LOW ( 0 | ( FTDI_SIO_SET_DTR_MASK << 8)) 636 #define FTDI_SIO_SET_RTS_MASK 0x2 637 #define FTDI_SIO_SET_RTS_HIGH ( 2 | ( FTDI_SIO_SET_RTS_MASK << 8 )) 638 #define FTDI_SIO_SET_RTS_LOW ( 0 | ( FTDI_SIO_SET_RTS_MASK << 8 )) 639 640 /* 641 * ControlValue 642 * B0 DTR state 643 * 0 = reset 644 * 1 = set 645 * B1 RTS state 646 * 0 = reset 647 * 1 = set 648 * B2..7 Reserved 649 * B8 DTR state enable 650 * 0 = ignore 651 * 1 = use DTR state 652 * B9 RTS state enable 653 * 0 = ignore 654 * 1 = use RTS state 655 * B10..15 Reserved 656 */ 657 658 /* FTDI_SIO_SET_FLOW_CTRL */ 659 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40 660 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL 661 #define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 662 #define FTDI_SIO_RTS_CTS_HS (0x1 << 8) 663 #define FTDI_SIO_DTR_DSR_HS (0x2 << 8) 664 #define FTDI_SIO_XON_XOFF_HS (0x4 << 8) 665 /* 666 * BmRequestType: 0100 0000b 667 * bRequest: FTDI_SIO_SET_FLOW_CTRL 668 * wValue: Xoff/Xon 669 * wIndex: Protocol/Port - hIndex is protocl / lIndex is port 670 * wLength: 0 671 * Data: None 672 * 673 * hIndex protocol is: 674 * B0 Output handshaking using RTS/CTS 675 * 0 = disabled 676 * 1 = enabled 677 * B1 Output handshaking using DTR/DSR 678 * 0 = disabled 679 * 1 = enabled 680 * B2 Xon/Xoff handshaking 681 * 0 = disabled 682 * 1 = enabled 683 * 684 * A value of zero in the hIndex field disables handshaking 685 * 686 * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character 687 * and the lValue field contains the XON character. 688 */ 689 690 /* 691 * FTDI_SIO_GET_LATENCY_TIMER 692 * 693 * Set the timeout interval. The FTDI collects data from the slave 694 * device, transmitting it to the host when either A) 62 bytes are 695 * received, or B) the timeout interval has elapsed and the buffer 696 * contains at least 1 byte. Setting this value to a small number 697 * can dramatically improve performance for applications which send 698 * small packets, since the default value is 16ms. 699 */ 700 #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER 701 #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0 702 703 /* 704 * BmRequestType: 1100 0000b 705 * bRequest: FTDI_SIO_GET_LATENCY_TIMER 706 * wValue: 0 707 * wIndex: Port 708 * wLength: 0 709 * Data: latency (on return) 710 */ 711 712 /* 713 * FTDI_SIO_SET_LATENCY_TIMER 714 * 715 * Set the timeout interval. The FTDI collects data from the slave 716 * device, transmitting it to the host when either A) 62 bytes are 717 * received, or B) the timeout interval has elapsed and the buffer 718 * contains at least 1 byte. Setting this value to a small number 719 * can dramatically improve performance for applications which send 720 * small packets, since the default value is 16ms. 721 */ 722 #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER 723 #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40 724 725 /* 726 * BmRequestType: 0100 0000b 727 * bRequest: FTDI_SIO_SET_LATENCY_TIMER 728 * wValue: Latency (milliseconds) 729 * wIndex: Port 730 * wLength: 0 731 * Data: None 732 * 733 * wValue: 734 * B0..7 Latency timer 735 * B8..15 0 736 * 737 */ 738 739 /* 740 * FTDI_SIO_SET_EVENT_CHAR 741 * 742 * Set the special event character for the specified communications port. 743 * If the device sees this character it will immediately return the 744 * data read so far - rather than wait 40ms or until 62 bytes are read 745 * which is what normally happens. 746 */ 747 748 749 #define FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR 750 #define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40 751 752 753 /* 754 * BmRequestType: 0100 0000b 755 * bRequest: FTDI_SIO_SET_EVENT_CHAR 756 * wValue: EventChar 757 * wIndex: Port 758 * wLength: 0 759 * Data: None 760 * 761 * wValue: 762 * B0..7 Event Character 763 * B8 Event Character Processing 764 * 0 = disabled 765 * 1 = enabled 766 * B9..15 Reserved 767 * 768 */ 769 770 /* FTDI_SIO_SET_ERROR_CHAR */ 771 772 /* Set the parity error replacement character for the specified communications port */ 773 774 /* 775 * BmRequestType: 0100 0000b 776 * bRequest: FTDI_SIO_SET_EVENT_CHAR 777 * wValue: Error Char 778 * wIndex: Port 779 * wLength: 0 780 * Data: None 781 * 782 *Error Char 783 * B0..7 Error Character 784 * B8 Error Character Processing 785 * 0 = disabled 786 * 1 = enabled 787 * B9..15 Reserved 788 * 789 */ 790 791 /* FTDI_SIO_GET_MODEM_STATUS */ 792 /* Retrieve the current value of the modem status register */ 793 794 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0 795 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS 796 #define FTDI_SIO_CTS_MASK 0x10 797 #define FTDI_SIO_DSR_MASK 0x20 798 #define FTDI_SIO_RI_MASK 0x40 799 #define FTDI_SIO_RLSD_MASK 0x80 800 /* 801 * BmRequestType: 1100 0000b 802 * bRequest: FTDI_SIO_GET_MODEM_STATUS 803 * wValue: zero 804 * wIndex: Port 805 * wLength: 1 806 * Data: Status 807 * 808 * One byte of data is returned 809 * B0..3 0 810 * B4 CTS 811 * 0 = inactive 812 * 1 = active 813 * B5 DSR 814 * 0 = inactive 815 * 1 = active 816 * B6 Ring Indicator (RI) 817 * 0 = inactive 818 * 1 = active 819 * B7 Receive Line Signal Detect (RLSD) 820 * 0 = inactive 821 * 1 = active 822 */ 823 824 825 826 /* Descriptors returned by the device 827 * 828 * Device Descriptor 829 * 830 * Offset Field Size Value Description 831 * 0 bLength 1 0x12 Size of descriptor in bytes 832 * 1 bDescriptorType 1 0x01 DEVICE Descriptor Type 833 * 2 bcdUSB 2 0x0110 USB Spec Release Number 834 * 4 bDeviceClass 1 0x00 Class Code 835 * 5 bDeviceSubClass 1 0x00 SubClass Code 836 * 6 bDeviceProtocol 1 0x00 Protocol Code 837 * 7 bMaxPacketSize0 1 0x08 Maximum packet size for endpoint 0 838 * 8 idVendor 2 0x0403 Vendor ID 839 * 10 idProduct 2 0x8372 Product ID (FTDI_SIO_PID) 840 * 12 bcdDevice 2 0x0001 Device release number 841 * 14 iManufacturer 1 0x01 Index of man. string desc 842 * 15 iProduct 1 0x02 Index of prod string desc 843 * 16 iSerialNumber 1 0x02 Index of serial nmr string desc 844 * 17 bNumConfigurations 1 0x01 Number of possible configurations 845 * 846 * Configuration Descriptor 847 * 848 * Offset Field Size Value 849 * 0 bLength 1 0x09 Size of descriptor in bytes 850 * 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type 851 * 2 wTotalLength 2 0x0020 Total length of data 852 * 4 bNumInterfaces 1 0x01 Number of interfaces supported 853 * 5 bConfigurationValue 1 0x01 Argument for SetCOnfiguration() req 854 * 6 iConfiguration 1 0x02 Index of config string descriptor 855 * 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup 856 * 8 MaxPower 1 0x1E Max power consumption 857 * 858 * Interface Descriptor 859 * 860 * Offset Field Size Value 861 * 0 bLength 1 0x09 Size of descriptor in bytes 862 * 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type 863 * 2 bInterfaceNumber 1 0x00 Number of interface 864 * 3 bAlternateSetting 1 0x00 Value used to select alternate 865 * 4 bNumEndpoints 1 0x02 Number of endpoints 866 * 5 bInterfaceClass 1 0xFF Class Code 867 * 6 bInterfaceSubClass 1 0xFF Subclass Code 868 * 7 bInterfaceProtocol 1 0xFF Protocol Code 869 * 8 iInterface 1 0x02 Index of interface string description 870 * 871 * IN Endpoint Descriptor 872 * 873 * Offset Field Size Value 874 * 0 bLength 1 0x07 Size of descriptor in bytes 875 * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type 876 * 2 bEndpointAddress 1 0x82 Address of endpoint 877 * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk 878 * 4 bNumEndpoints 2 0x0040 maximum packet size 879 * 5 bInterval 1 0x00 Interval for polling endpoint 880 * 881 * OUT Endpoint Descriptor 882 * 883 * Offset Field Size Value 884 * 0 bLength 1 0x07 Size of descriptor in bytes 885 * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type 886 * 2 bEndpointAddress 1 0x02 Address of endpoint 887 * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk 888 * 4 bNumEndpoints 2 0x0040 maximum packet size 889 * 5 bInterval 1 0x00 Interval for polling endpoint 890 * 891 * DATA FORMAT 892 * 893 * IN Endpoint 894 * 895 * The device reserves the first two bytes of data on this endpoint to contain the current 896 * values of the modem and line status registers. In the absence of data, the device 897 * generates a message consisting of these two status bytes every 40 ms 898 * 899 * Byte 0: Modem Status 900 * 901 * Offset Description 902 * B0 Reserved - must be 1 903 * B1 Reserved - must be 0 904 * B2 Reserved - must be 0 905 * B3 Reserved - must be 0 906 * B4 Clear to Send (CTS) 907 * B5 Data Set Ready (DSR) 908 * B6 Ring Indicator (RI) 909 * B7 Receive Line Signal Detect (RLSD) 910 * 911 * Byte 1: Line Status 912 * 913 * Offset Description 914 * B0 Data Ready (DR) 915 * B1 Overrun Error (OE) 916 * B2 Parity Error (PE) 917 * B3 Framing Error (FE) 918 * B4 Break Interrupt (BI) 919 * B5 Transmitter Holding Register (THRE) 920 * B6 Transmitter Empty (TEMT) 921 * B7 Error in RCVR FIFO 922 * 923 */ 924 #define FTDI_RS0_CTS (1 << 4) 925 #define FTDI_RS0_DSR (1 << 5) 926 #define FTDI_RS0_RI (1 << 6) 927 #define FTDI_RS0_RLSD (1 << 7) 928 929 #define FTDI_RS_DR 1 930 #define FTDI_RS_OE (1<<1) 931 #define FTDI_RS_PE (1<<2) 932 #define FTDI_RS_FE (1<<3) 933 #define FTDI_RS_BI (1<<4) 934 #define FTDI_RS_THRE (1<<5) 935 #define FTDI_RS_TEMT (1<<6) 936 #define FTDI_RS_FIFO (1<<7) 937 938 /* 939 * OUT Endpoint 940 * 941 * This device reserves the first bytes of data on this endpoint contain the length 942 * and port identifier of the message. For the FTDI USB Serial converter the port 943 * identifier is always 1. 944 * 945 * Byte 0: Line Status 946 * 947 * Offset Description 948 * B0 Reserved - must be 1 949 * B1 Reserved - must be 0 950 * B2..7 Length of message - (not including Byte 0) 951 * 952 */ 953 954