1 /* 2 * Definitions for the FTDI USB Single Port Serial Converter - 3 * known as FTDI_SIO (Serial Input/Output application of the chipset) 4 * 5 * The example I have is known as the USC-1000 which is available from 6 * http://www.dse.co.nz - cat no XH4214 It looks similar to this: 7 * http://www.dansdata.com/usbser.htm but I can't be sure There are other 8 * USC-1000s which don't look like my device though so beware! 9 * 10 * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, 11 * USB on the other. 12 * 13 * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details 14 * of the protocol required to talk to the device and ongoing assistence 15 * during development. 16 * 17 * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the 18 * FTDI_SIO implementation. 19 * 20 * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais 21 * from Rudolf Gugler 22 * 23 */ 24 25 #define FTDI_VID 0x0403 /* Vendor Id */ 26 #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ 27 #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ 28 #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ 29 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ 30 #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ 31 #define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ 32 #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ 33 #define FTDI_NF_RIC_PID 0x0001 /* Product Id */ 34 #define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ 35 36 37 /* www.canusb.com Lawicel CANUSB device */ 38 #define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ 39 40 /* AlphaMicro Components AMC-232USB01 device */ 41 #define FTDI_AMC232_PID 0xFF00 /* Product Id */ 42 43 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ 44 /* the VID is the standard ftdi vid (FTDI_VID) */ 45 #define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ 46 #define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ 47 #define FTDI_SCS_DEVICE_2_PID 0xD012 48 #define FTDI_SCS_DEVICE_3_PID 0xD013 49 #define FTDI_SCS_DEVICE_4_PID 0xD014 50 #define FTDI_SCS_DEVICE_5_PID 0xD015 51 #define FTDI_SCS_DEVICE_6_PID 0xD016 52 #define FTDI_SCS_DEVICE_7_PID 0xD017 53 54 /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ 55 #define FTDI_ACTZWAVE_PID 0xF2D0 56 57 58 /* www.starting-point-systems.com µChameleon device */ 59 #define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ 60 61 /* www.irtrans.de device */ 62 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ 63 64 65 /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ 66 #define FTDI_TTUSB_PID 0xFF20 /* Product Id */ 67 68 /* iPlus device */ 69 #define FTDI_IPLUS_PID 0xD070 /* Product Id */ 70 #define FTDI_IPLUS2_PID 0xD071 /* Product Id */ 71 72 /* DMX4ALL DMX Interfaces */ 73 #define FTDI_DMX4ALL 0xC850 74 75 /* OpenDCC (www.opendcc.de) product id */ 76 #define FTDI_OPENDCC_PID 0xBFD8 77 78 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ 79 /* they use the ftdi chipset for the USB interface and the vendor id is the same */ 80 #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ 81 #define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ 82 #define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ 83 #define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ 84 #define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ 85 #define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ 86 #define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ 87 #define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ 88 89 /* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ 90 /* broadband internet service. The following PID is exhibited by the usb device supplied */ 91 /* (the VID is the standard ftdi vid (FTDI_VID) */ 92 #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ 93 94 /* 95 * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device 96 * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) 97 * (the VID is the standard ftdi vid (FTDI_VID) */ 98 #define FTDI_PCDJ_DAC2_PID 0xFA88 99 100 /* 101 * The following are the values for the Matrix Orbital LCD displays, 102 * which are the FT232BM ( similar to the 8U232AM ) 103 */ 104 #define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ 105 #define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ 106 #define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ 107 #define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ 108 #define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ 109 #define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ 110 #define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ 111 112 /* OOCDlink by Joern Kaipf <joernk@web.de> 113 * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ 114 #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ 115 116 /* 117 * The following are the values for the Matrix Orbital FTDI Range 118 * Anything in this range will use an FT232RL. 119 */ 120 #define MTXORB_VID 0x1B3D 121 #define MTXORB_FTDI_RANGE_0100_PID 0x0100 122 #define MTXORB_FTDI_RANGE_0101_PID 0x0101 123 #define MTXORB_FTDI_RANGE_0102_PID 0x0102 124 #define MTXORB_FTDI_RANGE_0103_PID 0x0103 125 #define MTXORB_FTDI_RANGE_0104_PID 0x0104 126 #define MTXORB_FTDI_RANGE_0105_PID 0x0105 127 #define MTXORB_FTDI_RANGE_0106_PID 0x0106 128 #define MTXORB_FTDI_RANGE_0107_PID 0x0107 129 #define MTXORB_FTDI_RANGE_0108_PID 0x0108 130 #define MTXORB_FTDI_RANGE_0109_PID 0x0109 131 #define MTXORB_FTDI_RANGE_010A_PID 0x010A 132 #define MTXORB_FTDI_RANGE_010B_PID 0x010B 133 #define MTXORB_FTDI_RANGE_010C_PID 0x010C 134 #define MTXORB_FTDI_RANGE_010D_PID 0x010D 135 #define MTXORB_FTDI_RANGE_010E_PID 0x010E 136 #define MTXORB_FTDI_RANGE_010F_PID 0x010F 137 #define MTXORB_FTDI_RANGE_0110_PID 0x0110 138 #define MTXORB_FTDI_RANGE_0111_PID 0x0111 139 #define MTXORB_FTDI_RANGE_0112_PID 0x0112 140 #define MTXORB_FTDI_RANGE_0113_PID 0x0113 141 #define MTXORB_FTDI_RANGE_0114_PID 0x0114 142 #define MTXORB_FTDI_RANGE_0115_PID 0x0115 143 #define MTXORB_FTDI_RANGE_0116_PID 0x0116 144 #define MTXORB_FTDI_RANGE_0117_PID 0x0117 145 #define MTXORB_FTDI_RANGE_0118_PID 0x0118 146 #define MTXORB_FTDI_RANGE_0119_PID 0x0119 147 #define MTXORB_FTDI_RANGE_011A_PID 0x011A 148 #define MTXORB_FTDI_RANGE_011B_PID 0x011B 149 #define MTXORB_FTDI_RANGE_011C_PID 0x011C 150 #define MTXORB_FTDI_RANGE_011D_PID 0x011D 151 #define MTXORB_FTDI_RANGE_011E_PID 0x011E 152 #define MTXORB_FTDI_RANGE_011F_PID 0x011F 153 #define MTXORB_FTDI_RANGE_0120_PID 0x0120 154 #define MTXORB_FTDI_RANGE_0121_PID 0x0121 155 #define MTXORB_FTDI_RANGE_0122_PID 0x0122 156 #define MTXORB_FTDI_RANGE_0123_PID 0x0123 157 #define MTXORB_FTDI_RANGE_0124_PID 0x0124 158 #define MTXORB_FTDI_RANGE_0125_PID 0x0125 159 #define MTXORB_FTDI_RANGE_0126_PID 0x0126 160 #define MTXORB_FTDI_RANGE_0127_PID 0x0127 161 #define MTXORB_FTDI_RANGE_0128_PID 0x0128 162 #define MTXORB_FTDI_RANGE_0129_PID 0x0129 163 #define MTXORB_FTDI_RANGE_012A_PID 0x012A 164 #define MTXORB_FTDI_RANGE_012B_PID 0x012B 165 #define MTXORB_FTDI_RANGE_012C_PID 0x012C 166 #define MTXORB_FTDI_RANGE_012D_PID 0x012D 167 #define MTXORB_FTDI_RANGE_012E_PID 0x012E 168 #define MTXORB_FTDI_RANGE_012F_PID 0x012F 169 #define MTXORB_FTDI_RANGE_0130_PID 0x0130 170 #define MTXORB_FTDI_RANGE_0131_PID 0x0131 171 #define MTXORB_FTDI_RANGE_0132_PID 0x0132 172 #define MTXORB_FTDI_RANGE_0133_PID 0x0133 173 #define MTXORB_FTDI_RANGE_0134_PID 0x0134 174 #define MTXORB_FTDI_RANGE_0135_PID 0x0135 175 #define MTXORB_FTDI_RANGE_0136_PID 0x0136 176 #define MTXORB_FTDI_RANGE_0137_PID 0x0137 177 #define MTXORB_FTDI_RANGE_0138_PID 0x0138 178 #define MTXORB_FTDI_RANGE_0139_PID 0x0139 179 #define MTXORB_FTDI_RANGE_013A_PID 0x013A 180 #define MTXORB_FTDI_RANGE_013B_PID 0x013B 181 #define MTXORB_FTDI_RANGE_013C_PID 0x013C 182 #define MTXORB_FTDI_RANGE_013D_PID 0x013D 183 #define MTXORB_FTDI_RANGE_013E_PID 0x013E 184 #define MTXORB_FTDI_RANGE_013F_PID 0x013F 185 #define MTXORB_FTDI_RANGE_0140_PID 0x0140 186 #define MTXORB_FTDI_RANGE_0141_PID 0x0141 187 #define MTXORB_FTDI_RANGE_0142_PID 0x0142 188 #define MTXORB_FTDI_RANGE_0143_PID 0x0143 189 #define MTXORB_FTDI_RANGE_0144_PID 0x0144 190 #define MTXORB_FTDI_RANGE_0145_PID 0x0145 191 #define MTXORB_FTDI_RANGE_0146_PID 0x0146 192 #define MTXORB_FTDI_RANGE_0147_PID 0x0147 193 #define MTXORB_FTDI_RANGE_0148_PID 0x0148 194 #define MTXORB_FTDI_RANGE_0149_PID 0x0149 195 #define MTXORB_FTDI_RANGE_014A_PID 0x014A 196 #define MTXORB_FTDI_RANGE_014B_PID 0x014B 197 #define MTXORB_FTDI_RANGE_014C_PID 0x014C 198 #define MTXORB_FTDI_RANGE_014D_PID 0x014D 199 #define MTXORB_FTDI_RANGE_014E_PID 0x014E 200 #define MTXORB_FTDI_RANGE_014F_PID 0x014F 201 #define MTXORB_FTDI_RANGE_0150_PID 0x0150 202 #define MTXORB_FTDI_RANGE_0151_PID 0x0151 203 #define MTXORB_FTDI_RANGE_0152_PID 0x0152 204 #define MTXORB_FTDI_RANGE_0153_PID 0x0153 205 #define MTXORB_FTDI_RANGE_0154_PID 0x0154 206 #define MTXORB_FTDI_RANGE_0155_PID 0x0155 207 #define MTXORB_FTDI_RANGE_0156_PID 0x0156 208 #define MTXORB_FTDI_RANGE_0157_PID 0x0157 209 #define MTXORB_FTDI_RANGE_0158_PID 0x0158 210 #define MTXORB_FTDI_RANGE_0159_PID 0x0159 211 #define MTXORB_FTDI_RANGE_015A_PID 0x015A 212 #define MTXORB_FTDI_RANGE_015B_PID 0x015B 213 #define MTXORB_FTDI_RANGE_015C_PID 0x015C 214 #define MTXORB_FTDI_RANGE_015D_PID 0x015D 215 #define MTXORB_FTDI_RANGE_015E_PID 0x015E 216 #define MTXORB_FTDI_RANGE_015F_PID 0x015F 217 #define MTXORB_FTDI_RANGE_0160_PID 0x0160 218 #define MTXORB_FTDI_RANGE_0161_PID 0x0161 219 #define MTXORB_FTDI_RANGE_0162_PID 0x0162 220 #define MTXORB_FTDI_RANGE_0163_PID 0x0163 221 #define MTXORB_FTDI_RANGE_0164_PID 0x0164 222 #define MTXORB_FTDI_RANGE_0165_PID 0x0165 223 #define MTXORB_FTDI_RANGE_0166_PID 0x0166 224 #define MTXORB_FTDI_RANGE_0167_PID 0x0167 225 #define MTXORB_FTDI_RANGE_0168_PID 0x0168 226 #define MTXORB_FTDI_RANGE_0169_PID 0x0169 227 #define MTXORB_FTDI_RANGE_016A_PID 0x016A 228 #define MTXORB_FTDI_RANGE_016B_PID 0x016B 229 #define MTXORB_FTDI_RANGE_016C_PID 0x016C 230 #define MTXORB_FTDI_RANGE_016D_PID 0x016D 231 #define MTXORB_FTDI_RANGE_016E_PID 0x016E 232 #define MTXORB_FTDI_RANGE_016F_PID 0x016F 233 #define MTXORB_FTDI_RANGE_0170_PID 0x0170 234 #define MTXORB_FTDI_RANGE_0171_PID 0x0171 235 #define MTXORB_FTDI_RANGE_0172_PID 0x0172 236 #define MTXORB_FTDI_RANGE_0173_PID 0x0173 237 #define MTXORB_FTDI_RANGE_0174_PID 0x0174 238 #define MTXORB_FTDI_RANGE_0175_PID 0x0175 239 #define MTXORB_FTDI_RANGE_0176_PID 0x0176 240 #define MTXORB_FTDI_RANGE_0177_PID 0x0177 241 #define MTXORB_FTDI_RANGE_0178_PID 0x0178 242 #define MTXORB_FTDI_RANGE_0179_PID 0x0179 243 #define MTXORB_FTDI_RANGE_017A_PID 0x017A 244 #define MTXORB_FTDI_RANGE_017B_PID 0x017B 245 #define MTXORB_FTDI_RANGE_017C_PID 0x017C 246 #define MTXORB_FTDI_RANGE_017D_PID 0x017D 247 #define MTXORB_FTDI_RANGE_017E_PID 0x017E 248 #define MTXORB_FTDI_RANGE_017F_PID 0x017F 249 #define MTXORB_FTDI_RANGE_0180_PID 0x0180 250 #define MTXORB_FTDI_RANGE_0181_PID 0x0181 251 #define MTXORB_FTDI_RANGE_0182_PID 0x0182 252 #define MTXORB_FTDI_RANGE_0183_PID 0x0183 253 #define MTXORB_FTDI_RANGE_0184_PID 0x0184 254 #define MTXORB_FTDI_RANGE_0185_PID 0x0185 255 #define MTXORB_FTDI_RANGE_0186_PID 0x0186 256 #define MTXORB_FTDI_RANGE_0187_PID 0x0187 257 #define MTXORB_FTDI_RANGE_0188_PID 0x0188 258 #define MTXORB_FTDI_RANGE_0189_PID 0x0189 259 #define MTXORB_FTDI_RANGE_018A_PID 0x018A 260 #define MTXORB_FTDI_RANGE_018B_PID 0x018B 261 #define MTXORB_FTDI_RANGE_018C_PID 0x018C 262 #define MTXORB_FTDI_RANGE_018D_PID 0x018D 263 #define MTXORB_FTDI_RANGE_018E_PID 0x018E 264 #define MTXORB_FTDI_RANGE_018F_PID 0x018F 265 #define MTXORB_FTDI_RANGE_0190_PID 0x0190 266 #define MTXORB_FTDI_RANGE_0191_PID 0x0191 267 #define MTXORB_FTDI_RANGE_0192_PID 0x0192 268 #define MTXORB_FTDI_RANGE_0193_PID 0x0193 269 #define MTXORB_FTDI_RANGE_0194_PID 0x0194 270 #define MTXORB_FTDI_RANGE_0195_PID 0x0195 271 #define MTXORB_FTDI_RANGE_0196_PID 0x0196 272 #define MTXORB_FTDI_RANGE_0197_PID 0x0197 273 #define MTXORB_FTDI_RANGE_0198_PID 0x0198 274 #define MTXORB_FTDI_RANGE_0199_PID 0x0199 275 #define MTXORB_FTDI_RANGE_019A_PID 0x019A 276 #define MTXORB_FTDI_RANGE_019B_PID 0x019B 277 #define MTXORB_FTDI_RANGE_019C_PID 0x019C 278 #define MTXORB_FTDI_RANGE_019D_PID 0x019D 279 #define MTXORB_FTDI_RANGE_019E_PID 0x019E 280 #define MTXORB_FTDI_RANGE_019F_PID 0x019F 281 #define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 282 #define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 283 #define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 284 #define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 285 #define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 286 #define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 287 #define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 288 #define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 289 #define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 290 #define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 291 #define MTXORB_FTDI_RANGE_01AA_PID 0x01AA 292 #define MTXORB_FTDI_RANGE_01AB_PID 0x01AB 293 #define MTXORB_FTDI_RANGE_01AC_PID 0x01AC 294 #define MTXORB_FTDI_RANGE_01AD_PID 0x01AD 295 #define MTXORB_FTDI_RANGE_01AE_PID 0x01AE 296 #define MTXORB_FTDI_RANGE_01AF_PID 0x01AF 297 #define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 298 #define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 299 #define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 300 #define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 301 #define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 302 #define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 303 #define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 304 #define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 305 #define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 306 #define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 307 #define MTXORB_FTDI_RANGE_01BA_PID 0x01BA 308 #define MTXORB_FTDI_RANGE_01BB_PID 0x01BB 309 #define MTXORB_FTDI_RANGE_01BC_PID 0x01BC 310 #define MTXORB_FTDI_RANGE_01BD_PID 0x01BD 311 #define MTXORB_FTDI_RANGE_01BE_PID 0x01BE 312 #define MTXORB_FTDI_RANGE_01BF_PID 0x01BF 313 #define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 314 #define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 315 #define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 316 #define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 317 #define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 318 #define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 319 #define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 320 #define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 321 #define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 322 #define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 323 #define MTXORB_FTDI_RANGE_01CA_PID 0x01CA 324 #define MTXORB_FTDI_RANGE_01CB_PID 0x01CB 325 #define MTXORB_FTDI_RANGE_01CC_PID 0x01CC 326 #define MTXORB_FTDI_RANGE_01CD_PID 0x01CD 327 #define MTXORB_FTDI_RANGE_01CE_PID 0x01CE 328 #define MTXORB_FTDI_RANGE_01CF_PID 0x01CF 329 #define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 330 #define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 331 #define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 332 #define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 333 #define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 334 #define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 335 #define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 336 #define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 337 #define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 338 #define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 339 #define MTXORB_FTDI_RANGE_01DA_PID 0x01DA 340 #define MTXORB_FTDI_RANGE_01DB_PID 0x01DB 341 #define MTXORB_FTDI_RANGE_01DC_PID 0x01DC 342 #define MTXORB_FTDI_RANGE_01DD_PID 0x01DD 343 #define MTXORB_FTDI_RANGE_01DE_PID 0x01DE 344 #define MTXORB_FTDI_RANGE_01DF_PID 0x01DF 345 #define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 346 #define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 347 #define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 348 #define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 349 #define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 350 #define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 351 #define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 352 #define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 353 #define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 354 #define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 355 #define MTXORB_FTDI_RANGE_01EA_PID 0x01EA 356 #define MTXORB_FTDI_RANGE_01EB_PID 0x01EB 357 #define MTXORB_FTDI_RANGE_01EC_PID 0x01EC 358 #define MTXORB_FTDI_RANGE_01ED_PID 0x01ED 359 #define MTXORB_FTDI_RANGE_01EE_PID 0x01EE 360 #define MTXORB_FTDI_RANGE_01EF_PID 0x01EF 361 #define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 362 #define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 363 #define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 364 #define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 365 #define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 366 #define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 367 #define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 368 #define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 369 #define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 370 #define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 371 #define MTXORB_FTDI_RANGE_01FA_PID 0x01FA 372 #define MTXORB_FTDI_RANGE_01FB_PID 0x01FB 373 #define MTXORB_FTDI_RANGE_01FC_PID 0x01FC 374 #define MTXORB_FTDI_RANGE_01FD_PID 0x01FD 375 #define MTXORB_FTDI_RANGE_01FE_PID 0x01FE 376 #define MTXORB_FTDI_RANGE_01FF_PID 0x01FF 377 378 379 380 /* Interbiometrics USB I/O Board */ 381 /* Developed for Interbiometrics by Rudolf Gugler */ 382 #define INTERBIOMETRICS_VID 0x1209 383 #define INTERBIOMETRICS_IOBOARD_PID 0x1002 384 #define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 385 386 /* 387 * The following are the values for the Perle Systems 388 * UltraPort USB serial converters 389 */ 390 #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ 391 392 /* 393 * The following are the values for the Sealevel SeaLINK+ adapters. 394 * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and 395 * removed some PIDs that don't seem to match any existing products.) 396 */ 397 #define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ 398 #define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ 399 #define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ 400 #define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ 401 #define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ 402 #define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ 403 #define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ 404 #define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ 405 #define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ 406 #define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ 407 #define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ 408 #define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ 409 #define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ 410 #define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ 411 #define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ 412 #define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ 413 #define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ 414 #define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ 415 #define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ 416 #define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ 417 #define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ 418 #define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ 419 #define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ 420 #define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ 421 #define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ 422 #define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ 423 #define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ 424 #define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ 425 #define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ 426 #define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ 427 #define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ 428 #define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ 429 #define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ 430 #define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ 431 #define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ 432 #define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ 433 #define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ 434 #define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ 435 #define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ 436 #define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ 437 #define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ 438 #define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ 439 #define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ 440 #define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ 441 #define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ 442 #define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ 443 #define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ 444 #define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ 445 446 /* 447 * The following are the values for two KOBIL chipcard terminals. 448 */ 449 #define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ 450 #define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ 451 #define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ 452 453 /* 454 * Icom ID-1 digital transceiver 455 */ 456 457 #define ICOM_ID1_VID 0x0C26 458 #define ICOM_ID1_PID 0x0004 459 460 /* 461 * ASK.fr devices 462 */ 463 #define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ 464 465 /* 466 * FTDI USB UART chips used in construction projects from the 467 * Elektor Electronics magazine (http://elektor-electronics.co.uk) 468 */ 469 #define ELEKTOR_VID 0x0C7D 470 #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ 471 472 /* 473 * DSS-20 Sync Station for Sony Ericsson P800 474 */ 475 #define FTDI_DSS20_PID 0xFC82 476 477 /* 478 * Home Electronics (www.home-electro.com) USB gadgets 479 */ 480 #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ 481 482 /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ 483 /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ 484 #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ 485 486 /* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ 487 488 #define FTDI_TNC_X_PID 0xEBE0 489 490 /* 491 * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). 492 * All of these devices use FTDI's vendor ID (0x0403). 493 * 494 * The previously included PID for the UO 100 module was incorrect. 495 * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). 496 * 497 * Armin Laeuger originally sent the PID for the UM 100 module. 498 */ 499 #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ 500 #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ 501 #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ 502 #define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ 503 /* Additional ELV PIDs that default to using the FTDI D2XX drivers on 504 * MS Windows, rather than the FTDI Virtual Com Port drivers. 505 * Maybe these will be easier to use with the libftdi/libusb user-space 506 * drivers, or possibly the Comedi drivers in some cases. */ 507 #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ 508 #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ 509 #define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ 510 #define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ 511 #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ 512 #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ 513 #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ 514 #define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ 515 #define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ 516 #define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ 517 #define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ 518 #define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ 519 #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ 520 #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ 521 #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ 522 #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ 523 #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ 524 #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ 525 #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ 526 #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ 527 #define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ 528 #define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ 529 #define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ 530 531 /* 532 * Definitions for ID TECH (www.idt-net.com) devices 533 */ 534 #define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ 535 #define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ 536 537 /* 538 * Definitions for Omnidirectional Control Technology, Inc. devices 539 */ 540 #define OCT_VID 0x0B39 /* OCT vendor ID */ 541 /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ 542 /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ 543 /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ 544 #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ 545 546 /* an infrared receiver for user access control with IR tags */ 547 #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ 548 549 /* 550 * Definitions for Artemis astronomical USB based cameras 551 * Check it at http://www.artemisccd.co.uk/ 552 */ 553 #define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ 554 555 /* 556 * Definitions for ATIK Instruments astronomical USB based cameras 557 * Check it at http://www.atik-instruments.com/ 558 */ 559 #define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ 560 #define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ 561 #define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ 562 #define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ 563 #define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ 564 565 /* 566 * Protego product ids 567 */ 568 #define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ 569 #define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ 570 #define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ 571 #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ 572 573 /* 574 * Gude Analog- und Digitalsysteme GmbH 575 */ 576 #define FTDI_GUDEADS_E808_PID 0xE808 577 #define FTDI_GUDEADS_E809_PID 0xE809 578 #define FTDI_GUDEADS_E80A_PID 0xE80A 579 #define FTDI_GUDEADS_E80B_PID 0xE80B 580 #define FTDI_GUDEADS_E80C_PID 0xE80C 581 #define FTDI_GUDEADS_E80D_PID 0xE80D 582 #define FTDI_GUDEADS_E80E_PID 0xE80E 583 #define FTDI_GUDEADS_E80F_PID 0xE80F 584 #define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ 585 #define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ 586 #define FTDI_GUDEADS_E88A_PID 0xE88A 587 #define FTDI_GUDEADS_E88B_PID 0xE88B 588 #define FTDI_GUDEADS_E88C_PID 0xE88C 589 #define FTDI_GUDEADS_E88D_PID 0xE88D 590 #define FTDI_GUDEADS_E88E_PID 0xE88E 591 #define FTDI_GUDEADS_E88F_PID 0xE88F 592 593 /* 594 * Linx Technologies product ids 595 */ 596 #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ 597 #define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ 598 #define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ 599 #define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ 600 #define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ 601 602 /* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ 603 /* unit for PIC16's/PIC18's */ 604 #define FTDI_CCSICDU20_0_PID 0xF9D0 605 #define FTDI_CCSICDU40_1_PID 0xF9D1 606 #define FTDI_CCSMACHX_2_PID 0xF9D2 607 608 /* Inside Accesso contactless reader (http://www.insidefr.com) */ 609 #define INSIDE_ACCESSO 0xFAD0 610 611 /* 612 * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI 613 */ 614 #define INTREPID_VID 0x093C 615 #define INTREPID_VALUECAN_PID 0x0601 616 #define INTREPID_NEOVI_PID 0x0701 617 618 /* 619 * Falcom Wireless Communications GmbH 620 */ 621 #define FALCOM_VID 0x0F94 /* Vendor Id */ 622 #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ 623 #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ 624 625 /* 626 * SUUNTO product ids 627 */ 628 #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ 629 630 /* 631 * Oceanic product ids 632 */ 633 #define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ 634 635 /* 636 * TTi (Thurlby Thandar Instruments) 637 */ 638 #define TTI_VID 0x103E /* Vendor Id */ 639 #define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ 640 641 /* 642 * Definitions for B&B Electronics products. 643 */ 644 #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ 645 #define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ 646 #define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ 647 #define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ 648 649 /* 650 * RM Michaelides CANview USB (http://www.rmcan.com) 651 * CAN fieldbus interface adapter, added by port GmbH www.port.de) 652 * Ian Abbott changed the macro names for consistency. 653 */ 654 #define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ 655 656 /* 657 * EVER Eco Pro UPS (http://www.ever.com.pl/) 658 */ 659 660 #define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ 661 662 /* 663 * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, 664 * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices 665 * and I'm not entirely sure which are used by which. 666 */ 667 #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 668 #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 669 670 /* 671 * Mobility Electronics products. 672 */ 673 #define MOBILITY_VID 0x1342 674 #define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ 675 676 /* 677 * microHAM product IDs (http://www.microham.com). 678 * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> 679 * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. 680 * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. 681 */ 682 #define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ 683 #define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ 684 #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ 685 #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ 686 #define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ 687 #define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ 688 #define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ 689 #define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ 690 691 /* 692 * Active Robots product ids. 693 */ 694 #define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ 695 696 /* 697 * Xsens Technologies BV products (http://www.xsens.com). 698 */ 699 #define XSENS_CONVERTER_0_PID 0xD388 700 #define XSENS_CONVERTER_1_PID 0xD389 701 #define XSENS_CONVERTER_2_PID 0xD38A 702 #define XSENS_CONVERTER_3_PID 0xD38B 703 #define XSENS_CONVERTER_4_PID 0xD38C 704 #define XSENS_CONVERTER_5_PID 0xD38D 705 #define XSENS_CONVERTER_6_PID 0xD38E 706 #define XSENS_CONVERTER_7_PID 0xD38F 707 708 /* 709 * Teratronik product ids. 710 * Submitted by O. Wölfelschneider. 711 */ 712 #define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ 713 #define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ 714 715 /* 716 * Evolution Robotics products (http://www.evolution.com/). 717 * Submitted by Shawn M. Lavelle. 718 */ 719 #define EVOLUTION_VID 0xDEEE /* Vendor ID */ 720 #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ 721 #define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ 722 #define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ 723 #define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ 724 725 /* Pyramid Computer GmbH */ 726 #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ 727 728 /* 729 * Posiflex inc retail equipment (http://www.posiflex.com.tw) 730 */ 731 #define POSIFLEX_VID 0x0d3a /* Vendor ID */ 732 #define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ 733 734 /* 735 * Westrex International devices submitted by Cory Lee 736 */ 737 #define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ 738 #define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ 739 740 /* 741 * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) 742 */ 743 #define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ 744 745 /* 746 * Eclo (http://www.eclo.pt/) product IDs. 747 * PID 0xEA90 submitted by Martin Grill. 748 */ 749 #define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ 750 751 /* 752 * Papouch products (http://www.papouch.com/) 753 * Submitted by Folkert van Heusden 754 */ 755 756 #define PAPOUCH_VID 0x5050 /* Vendor ID */ 757 #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ 758 #define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ 759 760 /* 761 * ACG Identification Technologies GmbH products (http://www.acg.de/). 762 * Submitted by anton -at- goto10 -dot- org. 763 */ 764 #define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ 765 766 /* 767 * Yost Engineering, Inc. products (www.yostengineering.com). 768 * PID 0xE050 submitted by Aaron Prose. 769 */ 770 #define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ 771 772 /* 773 * ThorLabs USB motor drivers 774 */ 775 #define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ 776 777 /* 778 * Testo products (http://www.testo.com/) 779 * Submitted by Colin Leroy 780 */ 781 #define TESTO_VID 0x128D 782 #define TESTO_USB_INTERFACE_PID 0x0001 783 784 /* 785 * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. 786 */ 787 #define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ 788 789 /* 790 * Tactrix OpenPort (ECU) devices. 791 * OpenPort 1.3M submitted by Donour Sizemore. 792 * OpenPort 1.3S and 1.3U submitted by Ian Abbott. 793 */ 794 #define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ 795 #define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ 796 #define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ 797 798 /* 799 * Telldus Technologies 800 */ 801 #define TELLDUS_VID 0x1781 /* Vendor ID */ 802 #define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ 803 804 /* 805 * IBS elektronik product ids 806 * Submitted by Thomas Schleusener 807 */ 808 #define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ 809 #define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ 810 #define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ 811 #define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ 812 #define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ 813 #define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ 814 #define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ 815 #define FTDI_IBS_PROD_PID 0xff3f /* future device */ 816 817 /* 818 * MaxStream devices www.maxstream.net 819 */ 820 #define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ 821 822 /* Olimex */ 823 #define OLIMEX_VID 0x15BA 824 #define OLIMEX_ARM_USB_OCD_PID 0x0003 825 826 /* Luminary Micro Stellaris Boards, VID = FTDI_VID */ 827 /* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ 828 #define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 829 #define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 830 831 /* www.elsterelectricity.com Elster Unicom III Optical Probe */ 832 #define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ 833 834 /* 835 * The Mobility Lab (TML) 836 * Submitted by Pierre Castella 837 */ 838 #define TML_VID 0x1B91 /* Vendor ID */ 839 #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ 840 841 /* Propox devices */ 842 #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 843 844 /* Rig Expert Ukraine devices */ 845 #define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ 846 847 /* Domintell products http://www.domintell.com */ 848 #define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ 849 #define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ 850 851 /* Commands */ 852 #define FTDI_SIO_RESET 0 /* Reset the port */ 853 #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ 854 #define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ 855 #define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */ 856 #define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */ 857 #define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modern status register */ 858 #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ 859 #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ 860 #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ 861 #define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */ 862 863 864 /* 865 * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 866 * Submitted by Harald Welte <laforge@openmoko.org> 867 */ 868 #define FIC_VID 0x1457 869 #define FIC_NEO1973_DEBUG_PID 0x5118 870 871 /* 872 * RATOC REX-USB60F 873 */ 874 #define RATOC_VENDOR_ID 0x0584 875 #define RATOC_PRODUCT_ID_USB60F 0xb020 876 877 /* 878 * BmRequestType: 1100 0000b 879 * bRequest: FTDI_E2_READ 880 * wValue: 0 881 * wIndex: Address of word to read 882 * wLength: 2 883 * Data: Will return a word of data from E2Address 884 * 885 */ 886 887 /* Port Identifier Table */ 888 #define PIT_DEFAULT 0 /* SIOA */ 889 #define PIT_SIOA 1 /* SIOA */ 890 /* The device this driver is tested with one has only one port */ 891 #define PIT_SIOB 2 /* SIOB */ 892 #define PIT_PARALLEL 3 /* Parallel */ 893 894 /* FTDI_SIO_RESET */ 895 #define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET 896 #define FTDI_SIO_RESET_REQUEST_TYPE 0x40 897 #define FTDI_SIO_RESET_SIO 0 898 #define FTDI_SIO_RESET_PURGE_RX 1 899 #define FTDI_SIO_RESET_PURGE_TX 2 900 901 /* 902 * BmRequestType: 0100 0000B 903 * bRequest: FTDI_SIO_RESET 904 * wValue: Control Value 905 * 0 = Reset SIO 906 * 1 = Purge RX buffer 907 * 2 = Purge TX buffer 908 * wIndex: Port 909 * wLength: 0 910 * Data: None 911 * 912 * The Reset SIO command has this effect: 913 * 914 * Sets flow control set to 'none' 915 * Event char = $0D 916 * Event trigger = disabled 917 * Purge RX buffer 918 * Purge TX buffer 919 * Clear DTR 920 * Clear RTS 921 * baud and data format not reset 922 * 923 * The Purge RX and TX buffer commands affect nothing except the buffers 924 * 925 */ 926 927 /* FTDI_SIO_SET_BAUDRATE */ 928 #define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40 929 #define FTDI_SIO_SET_BAUDRATE_REQUEST 3 930 931 /* 932 * BmRequestType: 0100 0000B 933 * bRequest: FTDI_SIO_SET_BAUDRATE 934 * wValue: BaudDivisor value - see below 935 * wIndex: Port 936 * wLength: 0 937 * Data: None 938 * The BaudDivisor values are calculated as follows: 939 * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish 940 * I knew how to detect old chips to select proper base clock! 941 * - BaudDivisor is a fixed point number encoded in a funny way. 942 * (--WRONG WAY OF THINKING--) 943 * BaudDivisor is a fixed point number encoded with following bit weighs: 944 * (-2)(-1)(13..0). It is a radical with a denominator of 4, so values 945 * end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...). 946 * (--THE REALITY--) 947 * The both-bits-set has quite different meaning from 0.75 - the chip designers 948 * have decided it to mean 0.125 instead of 0.75. 949 * This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates 950 * and Flow Control Consideration for USB to RS232". 951 * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should 952 * automagically re-encode the resulting value to take fractions into consideration. 953 * As all values are integers, some bit twiddling is in order: 954 * BaudDivisor = (BaseClock / 16 / BaudRate) | 955 * (((BaseClock / 2 / BaudRate) & 4) ? 0x4000 // 0.5 956 * : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000 // 0.25 957 * : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000 // 0.125 958 * : 0) 959 * 960 * For the FT232BM, a 17th divisor bit was introduced to encode the multiples 961 * of 0.125 missing from the FT8U232AM. Bits 16 to 14 are coded as follows 962 * (the first four codes are the same as for the FT8U232AM, where bit 16 is 963 * always 0): 964 * 000 - add .000 to divisor 965 * 001 - add .500 to divisor 966 * 010 - add .250 to divisor 967 * 011 - add .125 to divisor 968 * 100 - add .375 to divisor 969 * 101 - add .625 to divisor 970 * 110 - add .750 to divisor 971 * 111 - add .875 to divisor 972 * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is 973 * placed in bit 0 of the urb index. 974 * 975 * Note that there are a couple of special cases to support the highest baud 976 * rates. If the calculated divisor value is 1, this needs to be replaced with 977 * 0. Additionally for the FT232BM, if the calculated divisor value is 0x4001 978 * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is 979 * not supported by the FT8U232AM). 980 */ 981 982 typedef enum { 983 SIO = 1, 984 FT8U232AM = 2, 985 FT232BM = 3, 986 FT2232C = 4, 987 FT232RL = 5, 988 } ftdi_chip_type_t; 989 990 typedef enum { 991 ftdi_sio_b300 = 0, 992 ftdi_sio_b600 = 1, 993 ftdi_sio_b1200 = 2, 994 ftdi_sio_b2400 = 3, 995 ftdi_sio_b4800 = 4, 996 ftdi_sio_b9600 = 5, 997 ftdi_sio_b19200 = 6, 998 ftdi_sio_b38400 = 7, 999 ftdi_sio_b57600 = 8, 1000 ftdi_sio_b115200 = 9 1001 } FTDI_SIO_baudrate_t; 1002 1003 /* 1004 * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values 1005 * are calculated internally. 1006 */ 1007 1008 #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA 1009 #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40 1010 #define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8) 1011 #define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8) 1012 #define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8) 1013 #define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8) 1014 #define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8) 1015 #define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11) 1016 #define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11) 1017 #define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11) 1018 #define FTDI_SIO_SET_BREAK (0x1 << 14) 1019 /* FTDI_SIO_SET_DATA */ 1020 1021 /* 1022 * BmRequestType: 0100 0000B 1023 * bRequest: FTDI_SIO_SET_DATA 1024 * wValue: Data characteristics (see below) 1025 * wIndex: Port 1026 * wLength: 0 1027 * Data: No 1028 * 1029 * Data characteristics 1030 * 1031 * B0..7 Number of data bits 1032 * B8..10 Parity 1033 * 0 = None 1034 * 1 = Odd 1035 * 2 = Even 1036 * 3 = Mark 1037 * 4 = Space 1038 * B11..13 Stop Bits 1039 * 0 = 1 1040 * 1 = 1.5 1041 * 2 = 2 1042 * B14 1043 * 1 = TX ON (break) 1044 * 0 = TX OFF (normal state) 1045 * B15 Reserved 1046 * 1047 */ 1048 1049 1050 1051 /* FTDI_SIO_MODEM_CTRL */ 1052 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40 1053 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL 1054 1055 /* 1056 * BmRequestType: 0100 0000B 1057 * bRequest: FTDI_SIO_MODEM_CTRL 1058 * wValue: ControlValue (see below) 1059 * wIndex: Port 1060 * wLength: 0 1061 * Data: None 1062 * 1063 * NOTE: If the device is in RTS/CTS flow control, the RTS set by this 1064 * command will be IGNORED without an error being returned 1065 * Also - you can not set DTR and RTS with one control message 1066 */ 1067 1068 #define FTDI_SIO_SET_DTR_MASK 0x1 1069 #define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK << 8)) 1070 #define FTDI_SIO_SET_DTR_LOW (0 | (FTDI_SIO_SET_DTR_MASK << 8)) 1071 #define FTDI_SIO_SET_RTS_MASK 0x2 1072 #define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8)) 1073 #define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8)) 1074 1075 /* 1076 * ControlValue 1077 * B0 DTR state 1078 * 0 = reset 1079 * 1 = set 1080 * B1 RTS state 1081 * 0 = reset 1082 * 1 = set 1083 * B2..7 Reserved 1084 * B8 DTR state enable 1085 * 0 = ignore 1086 * 1 = use DTR state 1087 * B9 RTS state enable 1088 * 0 = ignore 1089 * 1 = use RTS state 1090 * B10..15 Reserved 1091 */ 1092 1093 /* FTDI_SIO_SET_FLOW_CTRL */ 1094 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40 1095 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL 1096 #define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 1097 #define FTDI_SIO_RTS_CTS_HS (0x1 << 8) 1098 #define FTDI_SIO_DTR_DSR_HS (0x2 << 8) 1099 #define FTDI_SIO_XON_XOFF_HS (0x4 << 8) 1100 /* 1101 * BmRequestType: 0100 0000b 1102 * bRequest: FTDI_SIO_SET_FLOW_CTRL 1103 * wValue: Xoff/Xon 1104 * wIndex: Protocol/Port - hIndex is protocl / lIndex is port 1105 * wLength: 0 1106 * Data: None 1107 * 1108 * hIndex protocol is: 1109 * B0 Output handshaking using RTS/CTS 1110 * 0 = disabled 1111 * 1 = enabled 1112 * B1 Output handshaking using DTR/DSR 1113 * 0 = disabled 1114 * 1 = enabled 1115 * B2 Xon/Xoff handshaking 1116 * 0 = disabled 1117 * 1 = enabled 1118 * 1119 * A value of zero in the hIndex field disables handshaking 1120 * 1121 * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character 1122 * and the lValue field contains the XON character. 1123 */ 1124 1125 /* 1126 * FTDI_SIO_GET_LATENCY_TIMER 1127 * 1128 * Set the timeout interval. The FTDI collects data from the slave 1129 * device, transmitting it to the host when either A) 62 bytes are 1130 * received, or B) the timeout interval has elapsed and the buffer 1131 * contains at least 1 byte. Setting this value to a small number 1132 * can dramatically improve performance for applications which send 1133 * small packets, since the default value is 16ms. 1134 */ 1135 #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER 1136 #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0 1137 1138 /* 1139 * BmRequestType: 1100 0000b 1140 * bRequest: FTDI_SIO_GET_LATENCY_TIMER 1141 * wValue: 0 1142 * wIndex: Port 1143 * wLength: 0 1144 * Data: latency (on return) 1145 */ 1146 1147 /* 1148 * FTDI_SIO_SET_LATENCY_TIMER 1149 * 1150 * Set the timeout interval. The FTDI collects data from the slave 1151 * device, transmitting it to the host when either A) 62 bytes are 1152 * received, or B) the timeout interval has elapsed and the buffer 1153 * contains at least 1 byte. Setting this value to a small number 1154 * can dramatically improve performance for applications which send 1155 * small packets, since the default value is 16ms. 1156 */ 1157 #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER 1158 #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40 1159 1160 /* 1161 * BmRequestType: 0100 0000b 1162 * bRequest: FTDI_SIO_SET_LATENCY_TIMER 1163 * wValue: Latency (milliseconds) 1164 * wIndex: Port 1165 * wLength: 0 1166 * Data: None 1167 * 1168 * wValue: 1169 * B0..7 Latency timer 1170 * B8..15 0 1171 * 1172 */ 1173 1174 /* 1175 * FTDI_SIO_SET_EVENT_CHAR 1176 * 1177 * Set the special event character for the specified communications port. 1178 * If the device sees this character it will immediately return the 1179 * data read so far - rather than wait 40ms or until 62 bytes are read 1180 * which is what normally happens. 1181 */ 1182 1183 1184 #define FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR 1185 #define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40 1186 1187 1188 /* 1189 * BmRequestType: 0100 0000b 1190 * bRequest: FTDI_SIO_SET_EVENT_CHAR 1191 * wValue: EventChar 1192 * wIndex: Port 1193 * wLength: 0 1194 * Data: None 1195 * 1196 * wValue: 1197 * B0..7 Event Character 1198 * B8 Event Character Processing 1199 * 0 = disabled 1200 * 1 = enabled 1201 * B9..15 Reserved 1202 * 1203 */ 1204 1205 /* FTDI_SIO_SET_ERROR_CHAR */ 1206 1207 /* Set the parity error replacement character for the specified communications port */ 1208 1209 /* 1210 * BmRequestType: 0100 0000b 1211 * bRequest: FTDI_SIO_SET_EVENT_CHAR 1212 * wValue: Error Char 1213 * wIndex: Port 1214 * wLength: 0 1215 * Data: None 1216 * 1217 *Error Char 1218 * B0..7 Error Character 1219 * B8 Error Character Processing 1220 * 0 = disabled 1221 * 1 = enabled 1222 * B9..15 Reserved 1223 * 1224 */ 1225 1226 /* FTDI_SIO_GET_MODEM_STATUS */ 1227 /* Retrieve the current value of the modem status register */ 1228 1229 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0 1230 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS 1231 #define FTDI_SIO_CTS_MASK 0x10 1232 #define FTDI_SIO_DSR_MASK 0x20 1233 #define FTDI_SIO_RI_MASK 0x40 1234 #define FTDI_SIO_RLSD_MASK 0x80 1235 /* 1236 * BmRequestType: 1100 0000b 1237 * bRequest: FTDI_SIO_GET_MODEM_STATUS 1238 * wValue: zero 1239 * wIndex: Port 1240 * wLength: 1 1241 * Data: Status 1242 * 1243 * One byte of data is returned 1244 * B0..3 0 1245 * B4 CTS 1246 * 0 = inactive 1247 * 1 = active 1248 * B5 DSR 1249 * 0 = inactive 1250 * 1 = active 1251 * B6 Ring Indicator (RI) 1252 * 0 = inactive 1253 * 1 = active 1254 * B7 Receive Line Signal Detect (RLSD) 1255 * 0 = inactive 1256 * 1 = active 1257 */ 1258 1259 1260 1261 /* Descriptors returned by the device 1262 * 1263 * Device Descriptor 1264 * 1265 * Offset Field Size Value Description 1266 * 0 bLength 1 0x12 Size of descriptor in bytes 1267 * 1 bDescriptorType 1 0x01 DEVICE Descriptor Type 1268 * 2 bcdUSB 2 0x0110 USB Spec Release Number 1269 * 4 bDeviceClass 1 0x00 Class Code 1270 * 5 bDeviceSubClass 1 0x00 SubClass Code 1271 * 6 bDeviceProtocol 1 0x00 Protocol Code 1272 * 7 bMaxPacketSize0 1 0x08 Maximum packet size for endpoint 0 1273 * 8 idVendor 2 0x0403 Vendor ID 1274 * 10 idProduct 2 0x8372 Product ID (FTDI_SIO_PID) 1275 * 12 bcdDevice 2 0x0001 Device release number 1276 * 14 iManufacturer 1 0x01 Index of man. string desc 1277 * 15 iProduct 1 0x02 Index of prod string desc 1278 * 16 iSerialNumber 1 0x02 Index of serial nmr string desc 1279 * 17 bNumConfigurations 1 0x01 Number of possible configurations 1280 * 1281 * Configuration Descriptor 1282 * 1283 * Offset Field Size Value 1284 * 0 bLength 1 0x09 Size of descriptor in bytes 1285 * 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type 1286 * 2 wTotalLength 2 0x0020 Total length of data 1287 * 4 bNumInterfaces 1 0x01 Number of interfaces supported 1288 * 5 bConfigurationValue 1 0x01 Argument for SetCOnfiguration() req 1289 * 6 iConfiguration 1 0x02 Index of config string descriptor 1290 * 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup 1291 * 8 MaxPower 1 0x1E Max power consumption 1292 * 1293 * Interface Descriptor 1294 * 1295 * Offset Field Size Value 1296 * 0 bLength 1 0x09 Size of descriptor in bytes 1297 * 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type 1298 * 2 bInterfaceNumber 1 0x00 Number of interface 1299 * 3 bAlternateSetting 1 0x00 Value used to select alternate 1300 * 4 bNumEndpoints 1 0x02 Number of endpoints 1301 * 5 bInterfaceClass 1 0xFF Class Code 1302 * 6 bInterfaceSubClass 1 0xFF Subclass Code 1303 * 7 bInterfaceProtocol 1 0xFF Protocol Code 1304 * 8 iInterface 1 0x02 Index of interface string description 1305 * 1306 * IN Endpoint Descriptor 1307 * 1308 * Offset Field Size Value 1309 * 0 bLength 1 0x07 Size of descriptor in bytes 1310 * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type 1311 * 2 bEndpointAddress 1 0x82 Address of endpoint 1312 * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk 1313 * 4 bNumEndpoints 2 0x0040 maximum packet size 1314 * 5 bInterval 1 0x00 Interval for polling endpoint 1315 * 1316 * OUT Endpoint Descriptor 1317 * 1318 * Offset Field Size Value 1319 * 0 bLength 1 0x07 Size of descriptor in bytes 1320 * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type 1321 * 2 bEndpointAddress 1 0x02 Address of endpoint 1322 * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk 1323 * 4 bNumEndpoints 2 0x0040 maximum packet size 1324 * 5 bInterval 1 0x00 Interval for polling endpoint 1325 * 1326 * DATA FORMAT 1327 * 1328 * IN Endpoint 1329 * 1330 * The device reserves the first two bytes of data on this endpoint to contain the current 1331 * values of the modem and line status registers. In the absence of data, the device 1332 * generates a message consisting of these two status bytes every 40 ms 1333 * 1334 * Byte 0: Modem Status 1335 * 1336 * Offset Description 1337 * B0 Reserved - must be 1 1338 * B1 Reserved - must be 0 1339 * B2 Reserved - must be 0 1340 * B3 Reserved - must be 0 1341 * B4 Clear to Send (CTS) 1342 * B5 Data Set Ready (DSR) 1343 * B6 Ring Indicator (RI) 1344 * B7 Receive Line Signal Detect (RLSD) 1345 * 1346 * Byte 1: Line Status 1347 * 1348 * Offset Description 1349 * B0 Data Ready (DR) 1350 * B1 Overrun Error (OE) 1351 * B2 Parity Error (PE) 1352 * B3 Framing Error (FE) 1353 * B4 Break Interrupt (BI) 1354 * B5 Transmitter Holding Register (THRE) 1355 * B6 Transmitter Empty (TEMT) 1356 * B7 Error in RCVR FIFO 1357 * 1358 */ 1359 #define FTDI_RS0_CTS (1 << 4) 1360 #define FTDI_RS0_DSR (1 << 5) 1361 #define FTDI_RS0_RI (1 << 6) 1362 #define FTDI_RS0_RLSD (1 << 7) 1363 1364 #define FTDI_RS_DR 1 1365 #define FTDI_RS_OE (1<<1) 1366 #define FTDI_RS_PE (1<<2) 1367 #define FTDI_RS_FE (1<<3) 1368 #define FTDI_RS_BI (1<<4) 1369 #define FTDI_RS_THRE (1<<5) 1370 #define FTDI_RS_TEMT (1<<6) 1371 #define FTDI_RS_FIFO (1<<7) 1372 1373 /* 1374 * OUT Endpoint 1375 * 1376 * This device reserves the first bytes of data on this endpoint contain the length 1377 * and port identifier of the message. For the FTDI USB Serial converter the port 1378 * identifier is always 1. 1379 * 1380 * Byte 0: Line Status 1381 * 1382 * Offset Description 1383 * B0 Reserved - must be 1 1384 * B1 Reserved - must be 0 1385 * B2..7 Length of message - (not including Byte 0) 1386 * 1387 */ 1388 1389