xref: /linux/drivers/usb/serial/cypress_m8.h (revision 995834eb37c22ee9fd85324165ff71e9d6da5ae4)
11da177e4SLinus Torvalds #ifndef CYPRESS_M8_H
21da177e4SLinus Torvalds #define CYPRESS_M8_H
31da177e4SLinus Torvalds 
4*995834ebSGreg Kroah-Hartman /*
5*995834ebSGreg Kroah-Hartman  * definitions and function prototypes used for the cypress USB to Serial
6*995834ebSGreg Kroah-Hartman  * controller
7*995834ebSGreg Kroah-Hartman  */
81da177e4SLinus Torvalds 
9*995834ebSGreg Kroah-Hartman /*
10*995834ebSGreg Kroah-Hartman  * For sending our feature buffer - controlling serial communication states.
11*995834ebSGreg Kroah-Hartman  * Linux HID has no support for serial devices so we do this through the driver
12*995834ebSGreg Kroah-Hartman  */
131da177e4SLinus Torvalds #define HID_REQ_GET_REPORT	0x01
141da177e4SLinus Torvalds #define HID_REQ_SET_REPORT	0x09
151da177e4SLinus Torvalds 
161da177e4SLinus Torvalds /* List other cypress USB to Serial devices here, and add them to the id_table */
171da177e4SLinus Torvalds 
181da177e4SLinus Torvalds /* DeLorme Earthmate USB - a GPS device */
191da177e4SLinus Torvalds #define VENDOR_ID_DELORME		0x1163
201da177e4SLinus Torvalds #define PRODUCT_ID_EARTHMATEUSB		0x0100
2125b6f08eSLonnie Mendez #define PRODUCT_ID_EARTHMATEUSB_LT20	0x0200
221da177e4SLinus Torvalds 
231da177e4SLinus Torvalds /* Cypress HID->COM RS232 Adapter */
241da177e4SLinus Torvalds #define VENDOR_ID_CYPRESS		0x04b4
251da177e4SLinus Torvalds #define PRODUCT_ID_CYPHIDCOM		0x5500
26a5c44e29SLonnie Mendez 
276f6f06eeSDmitry Shapin /* Powercom UPS, chip CY7C63723 */
286f6f06eeSDmitry Shapin #define VENDOR_ID_POWERCOM		0x0d9f
296f6f06eeSDmitry Shapin #define PRODUCT_ID_UPS			0x0002
306f6f06eeSDmitry Shapin 
31a5c44e29SLonnie Mendez /* Nokia CA-42 USB to serial cable */
32a5c44e29SLonnie Mendez #define VENDOR_ID_DAZZLE		0x07d0
33a5c44e29SLonnie Mendez #define PRODUCT_ID_CA42			0x4101
341da177e4SLinus Torvalds /* End of device listing */
351da177e4SLinus Torvalds 
361da177e4SLinus Torvalds /* Used for setting / requesting serial line settings */
371da177e4SLinus Torvalds #define CYPRESS_SET_CONFIG	0x01
381da177e4SLinus Torvalds #define CYPRESS_GET_CONFIG	0x02
391da177e4SLinus Torvalds 
401da177e4SLinus Torvalds /* Used for throttle control */
411da177e4SLinus Torvalds #define THROTTLED		0x1
421da177e4SLinus Torvalds #define ACTUALLY_THROTTLED	0x2
431da177e4SLinus Torvalds 
44*995834ebSGreg Kroah-Hartman /*
45*995834ebSGreg Kroah-Hartman  * chiptypes - used in case firmware differs from the generic form ... offering
461da177e4SLinus Torvalds  * different baud speeds/etc.
471da177e4SLinus Torvalds  */
481da177e4SLinus Torvalds #define CT_EARTHMATE	0x01
491da177e4SLinus Torvalds #define CT_CYPHIDCOM	0x02
50a5c44e29SLonnie Mendez #define CT_CA42V2	0x03
511da177e4SLinus Torvalds #define CT_GENERIC	0x0F
521da177e4SLinus Torvalds /* End of chiptype definitions */
531da177e4SLinus Torvalds 
541da177e4SLinus Torvalds /* RS-232 serial data communication protocol definitions */
551da177e4SLinus Torvalds /* these are sent / read at byte 0 of the input/output hid reports */
561da177e4SLinus Torvalds /* You can find these values defined in the CY4601 USB to Serial design notes */
571da177e4SLinus Torvalds 
581da177e4SLinus Torvalds #define CONTROL_DTR	0x20	/* data terminal ready - flow control - host to device */
591da177e4SLinus Torvalds #define UART_DSR	0x20	/* data set ready - flow control - device to host */
601da177e4SLinus Torvalds #define CONTROL_RTS	0x10	/* request to send - flow control - host to device */
611da177e4SLinus Torvalds #define UART_CTS	0x10	/* clear to send - flow control - device to host */
621da177e4SLinus Torvalds #define UART_RI		0x10	/* ring indicator - modem - device to host */
631da177e4SLinus Torvalds #define UART_CD		0x40	/* carrier detect - modem - device to host */
641da177e4SLinus Torvalds #define CYP_ERROR	0x08	/* received from input report - device to host */
65fd589a8fSAnand Gadiyar /* Note - the below has nothing to do with the "feature report" reset */
661da177e4SLinus Torvalds #define CONTROL_RESET	0x08	/* sent with output report - host to device */
671da177e4SLinus Torvalds 
681da177e4SLinus Torvalds /* End of RS-232 protocol definitions */
691da177e4SLinus Torvalds 
701da177e4SLinus Torvalds #endif /* CYPRESS_M8_H */
71