1 /* 2 * ark3116 3 * - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547, 4 * productid=0x0232) (used in a datacable called KQ-U8A) 5 * 6 * - based on code by krisfx -> thanks !! 7 * (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457) 8 * 9 * - based on logs created by usbsnoopy 10 * 11 * Author : Simon Schulz [ark3116_driver<AT>auctionant.de] 12 * 13 * This program is free software; you can redistribute it and/or modify it 14 * under the terms of the GNU General Public License as published by the 15 * Free Software Foundation; either version 2 of the License, or (at your 16 * option) any later version. 17 */ 18 19 #include <linux/kernel.h> 20 #include <linux/init.h> 21 #include <linux/tty.h> 22 #include <linux/module.h> 23 #include <linux/usb.h> 24 #include "usb-serial.h" 25 26 27 static int debug; 28 29 static struct usb_device_id id_table [] = { 30 { USB_DEVICE(0x6547, 0x0232) }, 31 { }, 32 }; 33 MODULE_DEVICE_TABLE(usb, id_table); 34 35 struct ark3116_private { 36 spinlock_t lock; 37 u8 termios_initialized; 38 }; 39 40 static inline void ARK3116_SND(struct usb_serial *serial, int seq, 41 __u8 request, __u8 requesttype, 42 __u16 value, __u16 index) 43 { 44 int result; 45 result = usb_control_msg(serial->dev, 46 usb_sndctrlpipe(serial->dev,0), 47 request, requesttype, value, index, 48 NULL,0x00, 1000); 49 dbg("%03d > ok",seq); 50 } 51 52 static inline void ARK3116_RCV(struct usb_serial *serial, int seq, 53 __u8 request, __u8 requesttype, 54 __u16 value, __u16 index, __u8 expected, 55 char *buf) 56 { 57 int result; 58 result = usb_control_msg(serial->dev, 59 usb_rcvctrlpipe(serial->dev,0), 60 request, requesttype, value, index, 61 buf, 0x0000001, 1000); 62 if (result) 63 dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]); 64 else 65 dbg("%03d < 0 bytes", seq); 66 } 67 68 69 static inline void ARK3116_RCV_QUIET(struct usb_serial *serial, 70 __u8 request, __u8 requesttype, 71 __u16 value, __u16 index, char *buf) 72 { 73 usb_control_msg(serial->dev, 74 usb_rcvctrlpipe(serial->dev,0), 75 request, requesttype, value, index, 76 buf, 0x0000001, 1000); 77 } 78 79 80 static int ark3116_attach(struct usb_serial *serial) 81 { 82 char *buf; 83 struct ark3116_private *priv; 84 int i; 85 86 for (i = 0; i < serial->num_ports; ++i) { 87 priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL); 88 if (!priv) 89 goto cleanup; 90 memset (priv, 0x00, sizeof (struct ark3116_private)); 91 spin_lock_init(&priv->lock); 92 93 usb_set_serial_port_data(serial->port[i], priv); 94 } 95 96 buf = kmalloc(1, GFP_KERNEL); 97 if (!buf) { 98 dbg("error kmalloc -> out of mem ?"); 99 goto cleanup; 100 } 101 102 /* 3 */ 103 ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002); 104 ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001); 105 ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008); 106 ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B); 107 108 /* <-- seq7 */ 109 ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf); 110 ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003); 111 ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000); 112 ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001); 113 ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003); 114 115 /* <-- seq12 */ 116 ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf); 117 ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004); 118 119 /* 14 */ 120 ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf); 121 ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004); 122 123 /* 16 */ 124 ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf); 125 /* --> seq17 */ 126 ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004); 127 128 /* <-- seq18 */ 129 ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf); 130 131 /* --> seq19 */ 132 ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004); 133 134 135 /* <-- seq20 */ 136 /* seems like serial port status info (RTS, CTS,...) */ 137 /* returns modem control line status ?! */ 138 ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf); 139 140 /* set 9600 baud & do some init ?! */ 141 ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003); 142 ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000); 143 ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001); 144 ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003); 145 ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf); 146 ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003); 147 ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf); 148 ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003); 149 150 kfree(buf); 151 return(0); 152 153 cleanup: 154 for (--i; i>=0; --i) 155 usb_set_serial_port_data(serial->port[i], NULL); 156 return -ENOMEM; 157 } 158 159 static void ark3116_set_termios(struct usb_serial_port *port, 160 struct termios *old_termios) 161 { 162 struct usb_serial *serial = port->serial; 163 struct ark3116_private *priv = usb_get_serial_port_data(port); 164 unsigned int cflag = port->tty->termios->c_cflag; 165 unsigned long flags; 166 int baud; 167 int ark3116_baud; 168 char *buf; 169 char config; 170 171 config = 0; 172 173 dbg("%s - port %d", __FUNCTION__, port->number); 174 175 if ((!port->tty) || (!port->tty->termios)) { 176 dbg("%s - no tty structures", __FUNCTION__); 177 return; 178 } 179 180 spin_lock_irqsave(&priv->lock, flags); 181 if (!priv->termios_initialized) { 182 *(port->tty->termios) = tty_std_termios; 183 port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; 184 priv->termios_initialized = 1; 185 } 186 spin_unlock_irqrestore(&priv->lock, flags); 187 188 cflag = port->tty->termios->c_cflag; 189 190 /* check that they really want us to change something: */ 191 if (old_termios) { 192 if ((cflag == old_termios->c_cflag) && 193 (RELEVANT_IFLAG(port->tty->termios->c_iflag) == 194 RELEVANT_IFLAG(old_termios->c_iflag))) { 195 dbg("%s - nothing to change...", __FUNCTION__); 196 return; 197 } 198 } 199 200 buf = kmalloc(1, GFP_KERNEL); 201 if (!buf) { 202 dbg("error kmalloc"); 203 return; 204 } 205 206 /* set data bit count (8/7/6/5) */ 207 if (cflag & CSIZE){ 208 switch (cflag & CSIZE){ 209 case CS5: 210 config |= 0x00; 211 dbg("setting CS5"); 212 break; 213 case CS6: 214 config |= 0x01; 215 dbg("setting CS6"); 216 break; 217 case CS7: 218 config |= 0x02; 219 dbg("setting CS7"); 220 break; 221 default: 222 err ("CSIZE was set but not CS5-CS8, using CS8!"); 223 case CS8: 224 config |= 0x03; 225 dbg("setting CS8"); 226 break; 227 } 228 } 229 230 /* set parity (NONE,EVEN,ODD) */ 231 if (cflag & PARENB){ 232 if (cflag & PARODD) { 233 config |= 0x08; 234 dbg("setting parity to ODD"); 235 } else { 236 config |= 0x18; 237 dbg("setting parity to EVEN"); 238 } 239 } else { 240 dbg("setting parity to NONE"); 241 } 242 243 /* SET STOPBIT (1/2) */ 244 if (cflag & CSTOPB) { 245 config |= 0x04; 246 dbg ("setting 2 stop bits"); 247 } else { 248 dbg ("setting 1 stop bit"); 249 } 250 251 252 /* set baudrate: */ 253 baud = 0; 254 switch (cflag & CBAUD){ 255 case B0: 256 err("can't set 0baud, using 9600 instead"); 257 break; 258 case B75: baud = 75; break; 259 case B150: baud = 150; break; 260 case B300: baud = 300; break; 261 case B600: baud = 600; break; 262 case B1200: baud = 1200; break; 263 case B1800: baud = 1800; break; 264 case B2400: baud = 2400; break; 265 case B4800: baud = 4800; break; 266 case B9600: baud = 9600; break; 267 case B19200: baud = 19200; break; 268 case B38400: baud = 38400; break; 269 case B57600: baud = 57600; break; 270 case B115200: baud = 115200; break; 271 case B230400: baud = 230400; break; 272 case B460800: baud = 460800; break; 273 default: 274 dbg("does not support the baudrate requested (fix it)"); 275 break; 276 } 277 278 /* set 9600 as default (if given baudrate is invalid for example) */ 279 if (baud == 0) 280 baud = 9600; 281 282 /* 283 * found by try'n'error, be careful, maybe there are other options 284 * for multiplicator etc! 285 */ 286 if (baud == 460800) 287 /* strange, for 460800 the formula is wrong 288 * (dont use round(), then 9600baud is wrong) */ 289 ark3116_baud = 7; 290 else 291 ark3116_baud = 3000000 / baud; 292 293 /* ? */ 294 ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf); 295 /* offset = buf[0]; */ 296 /* offset = 0x03; */ 297 /* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */ 298 299 300 /* set baudrate */ 301 dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud); 302 ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003); 303 ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF) ,0x0000); 304 ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001); 305 ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003); 306 307 /* ? */ 308 ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf); 309 ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003); 310 311 /* set data bit count, stop bit count & parity: */ 312 dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config); 313 ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf); 314 ARK3116_SND(serial,154,0xFE,0x40,config,0x0003); 315 316 if (cflag & CRTSCTS) 317 dbg("CRTSCTS not supported by chipset ?!"); 318 319 /* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */ 320 321 kfree(buf); 322 return; 323 } 324 325 static int ark3116_open(struct usb_serial_port *port, struct file *filp) 326 { 327 struct termios tmp_termios; 328 struct usb_serial *serial = port->serial; 329 char *buf; 330 int result = 0; 331 332 dbg("%s - port %d", __FUNCTION__, port->number); 333 334 buf = kmalloc(1, GFP_KERNEL); 335 if (!buf) { 336 dbg("error kmalloc -> out of mem ?"); 337 return -ENOMEM; 338 } 339 340 result = usb_serial_generic_open(port, filp); 341 if (result) 342 return result; 343 344 /* open */ 345 ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf); 346 347 ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003); 348 ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000); 349 ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001); 350 ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003); 351 352 ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf); 353 ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004); 354 355 ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf); 356 ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004); 357 358 ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf); 359 360 ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004); 361 362 ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf); 363 364 ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004); 365 366 /* returns different values (control lines ?!) */ 367 ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf); 368 369 /* initialise termios: */ 370 if (port->tty) 371 ark3116_set_termios(port, &tmp_termios); 372 373 kfree(buf); 374 375 return result; 376 377 } 378 379 static int ark3116_ioctl(struct usb_serial_port *port, struct file *file, 380 unsigned int cmd, unsigned long arg) 381 { 382 dbg("ioctl not supported yet..."); 383 return -ENOIOCTLCMD; 384 } 385 386 static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file) 387 { 388 struct usb_serial *serial = port->serial; 389 char *buf; 390 char temp; 391 392 /* seems like serial port status info (RTS, CTS,...) is stored 393 * in reg(?) 0x0006 394 * pcb connection point 11 = GND -> sets bit4 of response 395 * pcb connection point 7 = GND -> sets bit6 of response 396 */ 397 398 buf = kmalloc(1, GFP_KERNEL); 399 if (!buf) { 400 dbg("error kmalloc"); 401 return -ENOMEM; 402 } 403 404 /* read register: */ 405 ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf); 406 temp = buf[0]; 407 kfree(buf); 408 409 /* i do not really know if bit4=CTS and bit6=DSR... was just a 410 * quick guess !! 411 */ 412 return (temp & (1<<4) ? TIOCM_CTS : 0) | 413 (temp & (1<<6) ? TIOCM_DSR : 0); 414 } 415 416 static struct usb_driver ark3116_driver = { 417 .name = "ark3116", 418 .probe = usb_serial_probe, 419 .disconnect = usb_serial_disconnect, 420 .id_table = id_table, 421 }; 422 423 static struct usb_serial_driver ark3116_device = { 424 .driver = { 425 .owner = THIS_MODULE, 426 .name = "ark3116", 427 }, 428 .id_table = id_table, 429 .num_interrupt_in = 1, 430 .num_bulk_in = 1, 431 .num_bulk_out = 1, 432 .num_ports = 1, 433 .attach = ark3116_attach, 434 .set_termios = ark3116_set_termios, 435 .ioctl = ark3116_ioctl, 436 .tiocmget = ark3116_tiocmget, 437 .open = ark3116_open, 438 }; 439 440 static int __init ark3116_init(void) 441 { 442 int retval; 443 444 retval = usb_serial_register(&ark3116_device); 445 if (retval) 446 return retval; 447 retval = usb_register(&ark3116_driver); 448 if (retval) 449 usb_serial_deregister(&ark3116_device); 450 return retval; 451 } 452 453 static void __exit ark3116_exit(void) 454 { 455 usb_deregister(&ark3116_driver); 456 usb_serial_deregister(&ark3116_device); 457 } 458 459 module_init(ark3116_init); 460 module_exit(ark3116_exit); 461 MODULE_LICENSE("GPL"); 462 463 module_param(debug, bool, S_IRUGO | S_IWUSR); 464 MODULE_PARM_DESC(debug, "Debug enabled or not"); 465 466