1# 2# USB Serial device configuration 3# 4 5menuconfig USB_SERIAL 6 tristate "USB Serial Converter support" 7 depends on TTY 8 ---help--- 9 Say Y here if you have a USB device that provides normal serial 10 ports, or acts like a serial device, and you want to connect it to 11 your USB bus. 12 13 Please read <file:Documentation/usb/usb-serial.txt> for more 14 information on the specifics of the different devices that are 15 supported, and on how to use them. 16 17 To compile this driver as a module, choose M here: the 18 module will be called usbserial. 19 20if USB_SERIAL 21 22config USB_SERIAL_CONSOLE 23 bool "USB Serial Console device support" 24 depends on USB_SERIAL=y 25 ---help--- 26 If you say Y here, it will be possible to use a USB to serial 27 converter port as the system console (the system console is the 28 device which receives all kernel messages and warnings and which 29 allows logins in single user mode). This could be useful if some 30 terminal or printer is connected to that serial port. 31 32 Even if you say Y here, the currently visible virtual console 33 (/dev/tty0) will still be used as the system console by default, but 34 you can alter that using a kernel command line option such as 35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of 36 your boot loader (lilo or loadlin) about how to pass options to the 37 kernel at boot time.) 38 39 If you don't have a VGA card installed and you say Y here, the 40 kernel will automatically use the first USB to serial converter 41 port, /dev/ttyUSB0, as system console. 42 43 If unsure, say N. 44 45config USB_SERIAL_GENERIC 46 bool "USB Generic Serial Driver" 47 help 48 Say Y here if you want to use the generic USB serial driver. Please 49 read <file:Documentation/usb/usb-serial.txt> for more information on 50 using this driver. It is recommended that the "USB Serial converter 51 support" be compiled as a module for this driver to be used 52 properly. 53 54config USB_SERIAL_SIMPLE 55 tristate "USB Serial Simple Driver" 56 help 57 Say Y here to use the USB serial "simple" driver. This driver 58 handles a wide range of very simple devices, all in one 59 driver. Specifically, it supports: 60 - Suunto ANT+ USB device. 61 - Medtronic CareLink USB device 62 - Fundamental Software dongle. 63 - Google USB serial devices 64 - HP4x calculators 65 - a number of Motorola phones 66 - Novatel Wireless GPS receivers 67 - Siemens USB/MPI adapter. 68 - ViVOtech ViVOpay USB device. 69 - Infineon Modem Flashloader USB interface 70 - ZIO Motherboard USB serial interface 71 72 To compile this driver as a module, choose M here: the module 73 will be called usb-serial-simple. 74 75config USB_SERIAL_AIRCABLE 76 tristate "USB AIRcable Bluetooth Dongle Driver" 77 help 78 Say Y here if you want to use USB AIRcable Bluetooth Dongle. 79 80 To compile this driver as a module, choose M here: the module 81 will be called aircable. 82 83config USB_SERIAL_ARK3116 84 tristate "USB ARK Micro 3116 USB Serial Driver" 85 help 86 Say Y here if you want to use a ARK Micro 3116 USB to Serial 87 device. 88 89 To compile this driver as a module, choose M here: the 90 module will be called ark3116 91 92config USB_SERIAL_BELKIN 93 tristate "USB Belkin and Peracom Single Port Serial Driver" 94 help 95 Say Y here if you want to use a Belkin USB Serial single port 96 adaptor (F5U103 is one of the model numbers) or the Peracom single 97 port USB to serial adapter. 98 99 To compile this driver as a module, choose M here: the 100 module will be called belkin_sa. 101 102config USB_SERIAL_CH341 103 tristate "USB Winchiphead CH341 Single Port Serial Driver" 104 help 105 Say Y here if you want to use a Winchiphead CH341 single port 106 USB to serial adapter. 107 108 To compile this driver as a module, choose M here: the 109 module will be called ch341. 110 111config USB_SERIAL_WHITEHEAT 112 tristate "USB ConnectTech WhiteHEAT Serial Driver" 113 select USB_EZUSB_FX2 114 help 115 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port 116 USB to serial converter device. 117 118 To compile this driver as a module, choose M here: the 119 module will be called whiteheat. 120 121config USB_SERIAL_DIGI_ACCELEPORT 122 tristate "USB Digi International AccelePort USB Serial Driver" 123 ---help--- 124 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices, 125 2 port (plus parallel port) and 4 port USB serial converters. The 126 parallel port on the USB 2 appears as a third serial port on Linux. 127 The Digi Acceleport USB 8 is not yet supported by this driver. 128 129 This driver works under SMP with the usb-uhci driver. It does not 130 work under SMP with the uhci driver. 131 132 To compile this driver as a module, choose M here: the 133 module will be called digi_acceleport. 134 135config USB_SERIAL_CP210X 136 tristate "USB CP210x family of UART Bridge Controllers" 137 help 138 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB 139 to RS232 converters. 140 141 To compile this driver as a module, choose M here: the 142 module will be called cp210x. 143 144config USB_SERIAL_CYPRESS_M8 145 tristate "USB Cypress M8 USB Serial Driver" 146 help 147 Say Y here if you want to use a device that contains the Cypress 148 USB to Serial microcontroller, such as the DeLorme Earthmate GPS. 149 150 Attempted SMP support... send bug reports! 151 152 Supported microcontrollers in the CY4601 family are: 153 CY7C63741 CY7C63742 CY7C63743 CY7C64013 154 155 To compile this driver as a module, choose M here: the 156 module will be called cypress_m8. 157 158config USB_SERIAL_EMPEG 159 tristate "USB Empeg empeg-car Mark I/II Driver" 160 help 161 Say Y here if you want to connect to your Empeg empeg-car Mark I/II 162 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...} 163 device node. See <file:Documentation/usb/usb-serial.txt> for more 164 tidbits of information. 165 166 To compile this driver as a module, choose M here: the 167 module will be called empeg. 168 169config USB_SERIAL_FTDI_SIO 170 tristate "USB FTDI Single Port Serial Driver" 171 ---help--- 172 Say Y here if you want to use a FTDI SIO single port USB to serial 173 converter device. The implementation I have is called the USC-1000. 174 This driver has also been tested with the 245 and 232 devices. 175 176 See <http://ftdi-usb-sio.sourceforge.net/> for more 177 information on this driver and the device. 178 179 To compile this driver as a module, choose M here: the 180 module will be called ftdi_sio. 181 182config USB_SERIAL_VISOR 183 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver" 184 help 185 Say Y here if you want to connect to your HandSpring Visor, Palm 186 m500 or m505 through its USB docking station. See 187 <http://usbvisor.sourceforge.net/index.php3> for more information on using this 188 driver. 189 190 To compile this driver as a module, choose M here: the 191 module will be called visor. 192 193config USB_SERIAL_IPAQ 194 tristate "USB PocketPC PDA Driver" 195 help 196 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada 197 or any other PDA running Windows CE 3.0 or PocketPC 2002 198 using a USB cradle/cable. For information on using the driver, 199 read <file:Documentation/usb/usb-serial.txt>. 200 201 To compile this driver as a module, choose M here: the 202 module will be called ipaq. 203 204config USB_SERIAL_IR 205 tristate "USB IR Dongle Serial Driver" 206 help 207 Say Y here if you want to enable simple serial support for USB IrDA 208 devices. This is useful if you do not want to use the full IrDA 209 stack. 210 211 To compile this driver as a module, choose M here: the 212 module will be called ir-usb. 213 214config USB_SERIAL_EDGEPORT 215 tristate "USB Inside Out Edgeport Serial Driver" 216 ---help--- 217 Say Y here if you want to use any of the following devices from 218 Inside Out Networks (Digi): 219 Edgeport/4 220 Rapidport/4 221 Edgeport/4t 222 Edgeport/2 223 Edgeport/4i 224 Edgeport/2i 225 Edgeport/421 226 Edgeport/21 227 Edgeport/8 228 Edgeport/8 Dual 229 Edgeport/2D8 230 Edgeport/4D8 231 Edgeport/8i 232 Edgeport/2 DIN 233 Edgeport/4 DIN 234 Edgeport/16 Dual 235 236 To compile this driver as a module, choose M here: the 237 module will be called io_edgeport. 238 239config USB_SERIAL_EDGEPORT_TI 240 tristate "USB Inside Out Edgeport Serial Driver (TI devices)" 241 help 242 Say Y here if you want to use any of the devices from Inside Out 243 Networks (Digi) that are not supported by the io_edgeport driver. 244 This includes the Edgeport/1 device. 245 246 To compile this driver as a module, choose M here: the 247 module will be called io_ti. 248 249config USB_SERIAL_F81232 250 tristate "USB Fintek F81232 Single Port Serial Driver" 251 help 252 Say Y here if you want to use the Fintek F81232 single 253 port usb to serial adapter. 254 255 To compile this driver as a module, choose M here: the 256 module will be called f81232. 257 258config USB_SERIAL_GARMIN 259 tristate "USB Garmin GPS driver" 260 help 261 Say Y here if you want to connect to your Garmin GPS. 262 Should work with most Garmin GPS devices which have a native USB port. 263 264 See <http://sourceforge.net/projects/garmin-gps> for the latest 265 version of the driver. 266 267 To compile this driver as a module, choose M here: the 268 module will be called garmin_gps. 269 270config USB_SERIAL_IPW 271 tristate "USB IPWireless (3G UMTS TDD) Driver" 272 select USB_SERIAL_WWAN 273 help 274 Say Y here if you want to use a IPWireless USB modem such as 275 the ones supplied by Axity3G/Sentech South Africa. 276 277 To compile this driver as a module, choose M here: the 278 module will be called ipw. 279 280config USB_SERIAL_IUU 281 tristate "USB Infinity USB Unlimited Phoenix Driver" 282 help 283 Say Y here if you want to use a IUU in phoenix mode and get 284 an extra ttyUSBx device. More information available on 285 http://eczema.ecze.com/iuu_phoenix.html 286 287 To compile this driver as a module, choose M here: the 288 module will be called iuu_phoenix.o 289 290config USB_SERIAL_KEYSPAN_PDA 291 tristate "USB Keyspan PDA Single Port Serial Driver" 292 select USB_EZUSB_FX2 293 help 294 Say Y here if you want to use a Keyspan PDA single port USB to 295 serial converter device. This driver makes use of firmware 296 developed from scratch by Brian Warner. 297 298 To compile this driver as a module, choose M here: the 299 module will be called keyspan_pda. 300 301config USB_SERIAL_KEYSPAN 302 tristate "USB Keyspan USA-xxx Serial Driver" 303 select USB_EZUSB_FX2 304 ---help--- 305 Say Y here if you want to use Keyspan USB to serial converter 306 devices. This driver makes use of Keyspan's official firmware 307 and was developed with their support. You must also include 308 firmware to support your particular device(s). 309 310 See <http://blemings.org/hugh/keyspan.html> for more information. 311 312 To compile this driver as a module, choose M here: the 313 module will be called keyspan. 314 315config USB_SERIAL_KEYSPAN_MPR 316 bool "USB Keyspan MPR Firmware" 317 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 318 help 319 Say Y here to include firmware for the Keyspan MPR converter. 320 321config USB_SERIAL_KEYSPAN_USA28 322 bool "USB Keyspan USA-28 Firmware" 323 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 324 help 325 Say Y here to include firmware for the USA-28 converter. 326 327config USB_SERIAL_KEYSPAN_USA28X 328 bool "USB Keyspan USA-28X Firmware" 329 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 330 help 331 Say Y here to include firmware for the USA-28X converter. 332 Be sure you have a USA-28X, there are also 28XA and 28XB 333 models, the label underneath has the actual part number. 334 335config USB_SERIAL_KEYSPAN_USA28XA 336 bool "USB Keyspan USA-28XA Firmware" 337 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 338 help 339 Say Y here to include firmware for the USA-28XA converter. 340 Be sure you have a USA-28XA, there are also 28X and 28XB 341 models, the label underneath has the actual part number. 342 343config USB_SERIAL_KEYSPAN_USA28XB 344 bool "USB Keyspan USA-28XB Firmware" 345 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 346 help 347 Say Y here to include firmware for the USA-28XB converter. 348 Be sure you have a USA-28XB, there are also 28X and 28XA 349 models, the label underneath has the actual part number. 350 351config USB_SERIAL_KEYSPAN_USA19 352 bool "USB Keyspan USA-19 Firmware" 353 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 354 help 355 Say Y here to include firmware for the USA-19 converter. 356 357config USB_SERIAL_KEYSPAN_USA18X 358 bool "USB Keyspan USA-18X Firmware" 359 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 360 help 361 Say Y here to include firmware for the USA-18X converter. 362 363config USB_SERIAL_KEYSPAN_USA19W 364 bool "USB Keyspan USA-19W Firmware" 365 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 366 help 367 Say Y here to include firmware for the USA-19W converter. 368 369config USB_SERIAL_KEYSPAN_USA19QW 370 bool "USB Keyspan USA-19QW Firmware" 371 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 372 help 373 Say Y here to include firmware for the USA-19QW converter. 374 375config USB_SERIAL_KEYSPAN_USA19QI 376 bool "USB Keyspan USA-19QI Firmware" 377 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 378 help 379 Say Y here to include firmware for the USA-19QI converter. 380 381config USB_SERIAL_KEYSPAN_USA49W 382 bool "USB Keyspan USA-49W Firmware" 383 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 384 help 385 Say Y here to include firmware for the USA-49W converter. 386 387config USB_SERIAL_KEYSPAN_USA49WLC 388 bool "USB Keyspan USA-49WLC Firmware" 389 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 390 help 391 Say Y here to include firmware for the USA-49WLC converter. 392 393config USB_SERIAL_KLSI 394 tristate "USB KL5KUSB105 (Palmconnect) Driver" 395 ---help--- 396 Say Y here if you want to use a KL5KUSB105 - based single port 397 serial adapter. The most widely known -- and currently the only 398 tested -- device in this category is the PalmConnect USB Serial 399 adapter sold by Palm Inc. for use with their Palm III and Palm V 400 series PDAs. 401 402 Please read <file:Documentation/usb/usb-serial.txt> for more 403 information. 404 405 To compile this driver as a module, choose M here: the 406 module will be called kl5kusb105. 407 408config USB_SERIAL_KOBIL_SCT 409 tristate "USB KOBIL chipcard reader" 410 ---help--- 411 Say Y here if you want to use one of the following KOBIL USB chipcard 412 readers: 413 414 - USB TWIN 415 - KAAN Standard Plus 416 - KAAN SIM 417 - SecOVID Reader Plus 418 - B1 Professional 419 - KAAN Professional 420 421 Note that you need a current CT-API. 422 To compile this driver as a module, choose M here: the 423 module will be called kobil_sct. 424 425config USB_SERIAL_MCT_U232 426 tristate "USB MCT Single Port Serial Driver" 427 ---help--- 428 Say Y here if you want to use a USB Serial single port adapter from 429 Magic Control Technology Corp. (U232 is one of the model numbers). 430 431 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB 432 BAY, Belkin F5U109, and Belkin F5U409 devices. 433 434 To compile this driver as a module, choose M here: the 435 module will be called mct_u232. 436 437config USB_SERIAL_METRO 438 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver" 439 ---help--- 440 Say Y here if you want to use a USB POS Metrologic barcode scanner. 441 442 To compile this driver as a module, choose M here: the 443 module will be called metro-usb. 444 445config USB_SERIAL_MOS7720 446 tristate "USB Moschip 7720 Serial Driver" 447 ---help--- 448 Say Y here if you want to use USB Serial single and double 449 port adapters from Moschip Semiconductor Tech. 450 451 To compile this driver as a module, choose M here: the 452 module will be called mos7720. 453 454config USB_SERIAL_MOS7715_PARPORT 455 bool "Support for parallel port on the Moschip 7715" 456 depends on USB_SERIAL_MOS7720 457 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720 458 select PARPORT_NOT_PC 459 ---help--- 460 Say Y if you have a Moschip 7715 device and would like to use 461 the parallel port it provides. The port will register with 462 the parport subsystem as a low-level driver. 463 464config USB_SERIAL_MOS7840 465 tristate "USB Moschip 7840/7820 USB Serial Driver" 466 ---help--- 467 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820 468 Dual-Serial port device from MosChip Semiconductor. 469 470 The MCS7840 and MCS7820 have been developed to connect a wide range 471 of standard serial devices to a USB host. The MCS7840 has a USB 472 device controller connected to four (4) individual UARTs while the 473 MCS7820 controller connects to two (2) individual UARTs. 474 475 To compile this driver as a module, choose M here: the 476 module will be called mos7840. If unsure, choose N. 477 478config USB_SERIAL_MXUPORT11 479 tristate "USB Moxa UPORT 11x0 Serial Driver" 480 ---help--- 481 Say Y here if you want to use a MOXA UPort 11x0 Serial hub. 482 483 This driver supports: 484 485 - UPort 1110 : 1 port RS-232 USB to Serial Hub. 486 - UPort 1130 : 1 port RS-422/485 USB to Serial Hub. 487 - UPort 1130I : 1 port RS-422/485 USB to Serial Hub with Isolation. 488 - UPort 1150 : 1 port RS-232/422/485 USB to Serial Hub. 489 - UPort 1150I : 1 port RS-232/422/485 USB to Serial Hub with Isolation. 490 491 To compile this driver as a module, choose M here: the 492 module will be called mxu11x0. 493 494config USB_SERIAL_MXUPORT 495 tristate "USB Moxa UPORT Serial Driver" 496 ---help--- 497 Say Y here if you want to use a MOXA UPort Serial hub. 498 499 This driver supports: 500 501 [2 Port] 502 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub 503 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with 504 Isolation 505 506 [4 Port] 507 - UPort 1410 : 4 Port RS-232 USB to Serial Hub 508 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub 509 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with 510 Isolation 511 512 [8 Port] 513 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub 514 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub 515 516 [16 Port] 517 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub 518 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub 519 520 To compile this driver as a module, choose M here: the 521 module will be called mxuport. 522 523config USB_SERIAL_NAVMAN 524 tristate "USB Navman GPS device" 525 help 526 To compile this driver as a module, choose M here: the 527 module will be called navman. 528 529config USB_SERIAL_PL2303 530 tristate "USB Prolific 2303 Single Port Serial Driver" 531 help 532 Say Y here if you want to use the PL2303 USB Serial single port 533 adapter from Prolific. 534 535 To compile this driver as a module, choose M here: the 536 module will be called pl2303. 537 538config USB_SERIAL_OTI6858 539 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller" 540 help 541 Say Y here if you want to use the OTi-6858 single port USB to serial 542 converter device. 543 544 To compile this driver as a module, choose M here: the 545 module will be called oti6858. 546 547config USB_SERIAL_QCAUX 548 tristate "USB Qualcomm Auxiliary Serial Port Driver" 549 help 550 Say Y here if you want to use the auxiliary serial ports provided 551 by many modems based on Qualcomm chipsets. These ports often use 552 a proprietary protocol called DM and cannot be used for AT- or 553 PPP-based communication. 554 555 To compile this driver as a module, choose M here: the 556 module will be called qcaux. If unsure, choose N. 557 558config USB_SERIAL_QUALCOMM 559 tristate "USB Qualcomm Serial modem" 560 select USB_SERIAL_WWAN 561 help 562 Say Y here if you have a Qualcomm USB modem device. These are 563 usually wireless cellular modems. 564 565 To compile this driver as a module, choose M here: the 566 module will be called qcserial. 567 568config USB_SERIAL_SPCP8X5 569 tristate "USB SPCP8x5 USB To Serial Driver" 570 help 571 Say Y here if you want to use the spcp8x5 converter chip. This is 572 commonly found in some Z-Wave USB devices. 573 574 To compile this driver as a module, choose M here: the 575 module will be called spcp8x5. 576 577config USB_SERIAL_SAFE 578 tristate "USB Safe Serial (Encapsulated) Driver" 579 580config USB_SERIAL_SAFE_PADDED 581 bool "USB Secure Encapsulated Driver - Padded" 582 depends on USB_SERIAL_SAFE 583 584config USB_SERIAL_SIERRAWIRELESS 585 tristate "USB Sierra Wireless Driver" 586 help 587 Say M here if you want to use Sierra Wireless devices. 588 589 Many devices have a feature known as TRU-Install. For those devices 590 to work properly, the USB Storage Sierra feature must be enabled. 591 592 To compile this driver as a module, choose M here: the 593 module will be called sierra. 594 595config USB_SERIAL_SYMBOL 596 tristate "USB Symbol Barcode driver (serial mode)" 597 help 598 Say Y here if you want to use a Symbol USB Barcode device 599 in serial emulation mode. 600 601 To compile this driver as a module, choose M here: the 602 module will be called symbolserial. 603 604config USB_SERIAL_TI 605 tristate "USB TI 3410/5052 Serial Driver" 606 help 607 Say Y here if you want to use the TI USB 3410 or 5052 608 serial devices. 609 610 To compile this driver as a module, choose M here: the 611 module will be called ti_usb_3410_5052. 612 613config USB_SERIAL_CYBERJACK 614 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader" 615 ---help--- 616 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard 617 reader. This is an interface to ISO 7816 compatible contact-based 618 chipcards, e.g. GSM SIMs. 619 620 To compile this driver as a module, choose M here: the 621 module will be called cyberjack. 622 623 If unsure, say N. 624 625config USB_SERIAL_XIRCOM 626 tristate "USB Xircom / Entrega Single Port Serial Driver" 627 select USB_EZUSB_FX2 628 help 629 Say Y here if you want to use a Xircom or Entrega single port USB to 630 serial converter device. This driver makes use of firmware 631 developed from scratch by Brian Warner. 632 633 To compile this driver as a module, choose M here: the 634 module will be called keyspan_pda. 635 636config USB_SERIAL_WWAN 637 tristate 638 639config USB_SERIAL_OPTION 640 tristate "USB driver for GSM and CDMA modems" 641 select USB_SERIAL_WWAN 642 help 643 Say Y here if you have a GSM or CDMA modem that's connected to USB. 644 645 This driver also supports several PCMCIA cards which have a 646 built-in OHCI-USB adapter and an internally-connected GSM modem. 647 The USB bus on these cards is not accessible externally. 648 649 Supported devices include (some of?) those made by: 650 Option, Huawei, Audiovox, Novatel Wireless, or Anydata. 651 652 To compile this driver as a module, choose M here: the 653 module will be called option. 654 655 If this driver doesn't recognize your device, 656 it might be accessible via the FTDI_SIO driver. 657 658config USB_SERIAL_OMNINET 659 tristate "USB ZyXEL omni.net LCD Plus Driver" 660 help 661 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA. 662 663 To compile this driver as a module, choose M here: the 664 module will be called omninet. 665 666config USB_SERIAL_OPTICON 667 tristate "USB Opticon Barcode driver (serial mode)" 668 help 669 Say Y here if you want to use a Opticon USB Barcode device 670 in serial emulation mode. 671 672 To compile this driver as a module, choose M here: the 673 module will be called opticon. 674 675config USB_SERIAL_XSENS_MT 676 tristate "Xsens motion tracker serial interface driver" 677 help 678 Say Y here if you want to use Xsens motion trackers. 679 680 This driver supports the new generation of motion trackers 681 by Xsens. Older devices can be accessed using the FTDI_SIO 682 driver. 683 684 To compile this driver as a module, choose M here: the 685 module will be called xsens_mt. 686 687config USB_SERIAL_WISHBONE 688 tristate "USB-Wishbone adapter interface driver" 689 help 690 Say Y here if you want to use a USB attached Wishbone bus. 691 692 Wishbone is an open hardware SoC bus commonly used in FPGA 693 designs. Bus access can be serialized using the Etherbone 694 protocol <http://www.ohwr.org/projects/etherbone-core>. 695 696 This driver is intended to be used with devices which attach 697 their internal Wishbone bus to a USB serial interface using 698 the Etherbone protocol. A userspace library is required to 699 speak the protocol made available by this driver as ttyUSBx. 700 701 To compile this driver as a module, choose M here: the 702 module will be called wishbone-serial. 703 704config USB_SERIAL_SSU100 705 tristate "USB Quatech SSU-100 Single Port Serial Driver" 706 help 707 Say Y here if you want to use the Quatech SSU-100 single 708 port usb to serial adapter. 709 710 To compile this driver as a module, choose M here: the 711 module will be called ssu100. 712 713config USB_SERIAL_QT2 714 tristate "USB Quatech Serial Driver for USB 2 devices" 715 help 716 Say Y here if you want to use the Quatech USB 2 717 serial adapters. 718 719 To compile this driver as a module, choose M here: the 720 module will be called quatech-serial. 721 722config USB_SERIAL_DEBUG 723 tristate "USB Debugging Device" 724 help 725 Say Y here if you have a USB debugging device used to receive 726 debugging data from another machine. The most common of these 727 devices is the NetChip TurboCONNECT device. 728 729 To compile this driver as a module, choose M here: the 730 module will be called usb-debug. 731 732endif # USB_SERIAL 733